Commit Graph

3613 Commits

Author SHA1 Message Date
Heiner Kallweit 60d9531a61 spi: fsl-espi: remove unneeded call to fsl_espi_setup_transfer
Resetting the chip to a default transfer mode after each transfer
doesn't provide any benefit. Therefore remove this call.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-04 14:46:39 -06:00
Hiep Cao Minh 3be09bec42 spi: rspi: supports 32bytes buffer for DUAL and QUAD
This patch supports 32bytes of buffer for DUAL and QUAD in QSPI by
Using Transmit/Receive Buffer Data Triggering Number.
In order to improve the DUAL and QUAD's performance of SPI
while transferring data in PIO mode, it sends/receives each 32bytes
data instead of each byte data as current situation.

Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-04 11:06:33 -06:00
Milo Kim 10565dfd35 spi: sun6i: Support Allwinner H3 SPI controller
H3 has two SPI controllers. The size of the buffer is 64 * 8.
(8 bit transfer by 64 entry FIFO)
A31 has four controllers. The size of the buffer is 128 * 8.
(8 bit transfer by 128 entry FIFO)

Register maps are sharable, so sun6i SPI driver is reusable with
device configuration.

Use the variable, 'fifo_depth' instead of fixed value to support both SPI
controllers.

Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-02 14:59:09 -06:00
Robert Baldyga 32df9ff2b8 spi: imx: set spi_bus_clk for mx21 and mx27
Introduce additional output parameter in spi_imx_clkdiv_1()
function to return result frequency and set it to spi_bus_clk.

This fixes division by zero bug, which occurred in
spi_imx_calculate_timeout() function.

Signed-off-by: Robert Baldyga <r.baldyga@hackerion.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-02 09:30:43 -06:00
Mark Brown 2fbef66e14 Merge remote-tracking branches 'spi/fix/dt', 'spi/fix/fsl-dspi' and 'spi/fix/fsl-espi' into spi-linus 2016-10-29 12:51:55 -06:00
Yuan Yao 5ee67b587a spi: dspi: clear SPI_SR before enable interrupt
Once dspi is used in uboot, the SPI_SR have been set by some value.
At this time, if kernel enable the interrupt before clear the
status flag, that will trigger the wrong interrupt.

Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 12:51:29 -06:00
Alexandru Gagniuc 196737912d spi: sun4i: Allow transfers larger than FIFO size
SPI transfers were limited to one FIFO depth, which is 64 bytes.
This was an artificial limitation, however, as the hardware can handle
much larger bursts. To accommodate this, we enable the interrupt when
the Rx FIFO is 3/4 full, and drain the FIFO within the interrupt
handler. The 3/4 ratio was chosen arbitrarily, with the intention to
reduce the potential number of interrupts.

Since the SUN4I_CTL_TP bit is set, the hardware will pause
transmission whenever the FIFO is full, so there is no risk of losing
data if we can't service the interrupt in time.

For the Tx side, enable and use the Tx FIFO 3/4 empty interrupt to
replenish the FIFO on large SPI bursts. This requires more care in
when the interrupt is left enabled, as this interrupt will continually
trigger when the FIFO is less than 1/4 full, even though we
acknowledge it.

Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Olliver Schinagl <o.schinagl@ultimaker.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 12:11:30 -06:00
Paulo Zaneti 73aaf15849 spi: fsl-espi: fix support for all available clock rates
According to NXP ESPI datasheet, the SPI clock rate is:

    spi_clk = System_Clock / ( 2 * DIV16 * ( 1 + PM ) )

Where System_Clock is the platform clock divided by 2,
DIV16 may be 1 or 16, and PM is a 4 bits integer (0 to 15).

Isolating PM on the expression, we get:

    PM = (System_Clock / ( 2 * DIV16 * spi_clk ) ) - 1

Where System_Clock = mpc8xxx_spi->spibrg / 2, spi_clk = hz,
and DIV16 = 1 or DIV16 = 16. So,

    PM = (mpc8xxx_spi->spibrg / ( 4 * hz) ) - 1
or
    PM = (mpc8xxx_spi->spibrg / ( 16 * 4 * hz) ) - 1

Current spi-fsl-espi driver can't configure the HW for all
supported clock rates. It filters out clock rates for PM = 0
and PM = 1.

This patch allows all range of supported clock rates to be
configured on the ESPI controller.

Signed-off-by: Paulo Zaneti <paulo.zaneti@datacom.ind.br>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 12:00:19 -06:00
Heiner Kallweit 66b8053e24 spi: fsl-espi: small fix to error path in fsl_espi_irq
spin_lock is used to obtain the spinlock, so spin_unlock
has to be used here.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-29 11:58:51 -06:00
Heiner Kallweit f05689a662 spi: fsl-espi: fix and improve reading from RX FIFO
Currently the driver polls in the ISR for enough bytes in the RX FIFO.
An ISR should never do this.
Change it to read as much as possible whenever the ISR is called.
This also allows to significantly simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:47 +01:00
Heiner Kallweit e508cea45b spi: fsl-espi: make better use of the RX FIFO
So far an interrupt is triggered whenever there's at least one byte
in the RX FIFO. This results in a unnecessarily high number of
interrupts.
Change this to generate an interrupt if
- RX FIFO is half full (except if all bytes to read fit into the
  RX FIFO anyway)
- end of transfer has been reached

This way the number of interrupts can be significantly reduced.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:47 +01:00
Heiner Kallweit db1b049fad spi: fsl-espi: extend and improve transfer error handling
Extend and improve transfer error handling
- in case of timeout report also number of remaining rx bytes
- in case of timeout return ETIMEDOUT instead of EMSGSIZE
- add sanity checks after all bytes have been sent / read:
 - check that HW has flag SPIE_DON set
 - check that RX / TX FIFO are empty

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:46 +01:00
Heiner Kallweit b3bec5f95f spi: fsl-espi: simplify and inline function fsl_espi_change_mode
The ESPI spec mentions no requirement to turn off the ESPI unit prior
to changing the mode. Most likely the ESPI unit is only turned off to
clear the FIFO's as before this patch series single bytes could
remain in the TX FIFO after transfer end.
Therefore remove disabling / re-enabling the ESPI unit.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:24 +01:00
Heiner Kallweit f895e27f59 spi: fsl-espi: Rename len in struct mpc8xxx_spi to rx_len and make it unsigned
Now that we introduced element tx_len in struct mpc8xxx_spi let's
rename element len to rx_len as it actually is the number of bytes to
receive. In addition make it unsigned.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:23 +01:00
Heiner Kallweit 5473126596 spi: fsl-espi: fix and improve writing to TX FIFO
This change addresses two issues:
- If the TX FIFO is full the ISR polls until there's free space again.
  An ISR should never wait for something.
- Currently the number of bytes to transfer is rounded up to the next
  multiple of 4. For most transfers therefore few bytes remain in the
  TX FIFO after end of transfer.
  This would cause the next transfer to fail and as a workaround the
  ESPI block is disabled / re-enabled in fsl_espi_change_mode.
  This seems to clear the FIFO's (although it's not mentioned in the
  spec).

With this change the TX FIFO is filled as much as possible initially
and whenever the ISR is called. Also the exact number of bytes is
transferred.
The spinlock protects against a potential race if the first interrupt
occurs whilst the TX FIFO is still being initially filled.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:23 +01:00
Heiner Kallweit e9e128a69a spi: fsl-espi: improve check for SPI_QE_CPU_MODE
SPI_QE_CPU_MODE doesn't exist for ESPI and is set by of_mpc8xxx_spi_probe
based on DT property "mode". This property is not defined for ESPI,
see Documentation/devicetree/bindings/spi/fsl-spi.txt.
So print an error message and bail out if SPI_QE_CPU_MODE is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 19:39:09 +01:00
Heiner Kallweit e3cd6cf425 spi: fsl-espi: fix merge conflict for commit "avoid processing uninitalized data on error"
Commit 5c0ba57744 ("spi: fsl-espi: avoid processing uninitalized
data on error") applied fine to stable but caused a merge conflict
on next. This patch fixes that.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-28 18:56:17 +01:00
Daniel Kurtz 8244bd3ab4 spi: change post transfer udelay() to usleep_range() for long delays
The spi_transfer parameter delay_usecs allows specifying a time to wait
after transferring a spi message.  This wait can be quite long - some
devices, such as some Chrome OS ECs, require as much as 2000 usecs after
a SPI transaction, before it can respond.

(cf: arch/arm64/boot/dts/nvidia/tegra132-norrin.dts:
   google,cros-ec-spi-msg-delay = <2000>
)

Blocking a CPU for 2 msecs in a busy loop like this doesn't seem very
friendly to other processes, so change the blocking delay to a sleep
to allow other things to use this CPU (or so it can sleep).

This should be safe to do, because:
 (a) A post-transaction delay like this is always specified as a minimum
     wait time
 (b) A delay here is most likely not very time sensitive, as it occurs
     after all data has been transferred
 (c) This delay occurs in a non-critical section of the spi worker thread
     so where it is safe to sleep.

Two caveats:
 1) To avoid penalizing short delays, still use udelay for delays < 10us.
 2) usleep_range() very often picks the upper bound, an upper bounds 10%
    should be plenty.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-26 12:35:17 +01:00
Mark Brown f9ce28f923 Merge branch 'fix/fsl-espi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-fsl-espi 2016-10-26 11:30:11 +01:00
Arnd Bergmann 5c0ba57744 spi: fsl-espi: avoid processing uninitalized data on error
When we get a spurious interrupt in fsl_espi_irq, we end up
processing four uninitalized bytes of data, as shown in this
warning message:

   drivers/spi/spi-fsl-espi.c: In function 'fsl_espi_irq':
   drivers/spi/spi-fsl-espi.c:462:4: warning: 'rx_data' may be used uninitialized in this function [-Wmaybe-uninitialized]

This adds another check so we skip the data in this case.

Fixes: 6319a68011 ("spi/fsl-espi: avoid infinite loops on fsl_espi_cpu_irq()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-10-26 11:14:52 +01:00
Ralf Ramsauer e0af98a7e0 spi: mark device nodes only in case of successful instantiation
Instantiated SPI device nodes are marked with OF_POPULATE. This was
introduced in bd6c164. On unloading, loaded device nodes will of course
be unmarked. The problem are nodes that fail during initialisation: If a
node fails, it won't be unloaded and hence not be unmarked.

If a SPI driver module is unloaded and reloaded, it will skip nodes that
failed before.

Skip device nodes that are already populated and mark them only in case
of success.

Note that the same issue exists for I2C.

Fixes: bd6c164 ("spi: Mark instantiated device nodes with OF_POPULATE")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-10-24 18:29:33 +01:00
Martin Kaiser 2dd33f9cec spi: imx: support DMA for imx35
Support DMA transfers on imx35 and compatible chipsets (imx31, imx25).

If DMA can be used, set the start mode control (SMC) bit to start the
SPI burst as soon as data is written into the tx fifo. Configure DMA
requests when the fifo is half empty during tx or half full during rx.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 18:04:23 +01:00
Wei Yongjun 2e9c079ccc spi: omap2-mcspi: Remove redundant return value check of platform_get_resource()
Remove unneeded error handling on the result of a call
to platform_get_resource() when the value is passed to
devm_ioremap_resource().

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-24 16:08:30 +01:00
Fabien Lahoudere 144235ea75 spi: spidev: Add device to spidev device tree compatibility list
Entries are needed in the spidev ID list to configure configure it from a
device tree. Add entry for the following device:
- "ge,achc" :  GE Healthcare USB Management Controller

The USB Management Controller does not expose USB to the host, but acts as
an offload engine, communicating with specific USB based data acquisition
devices which are connected to it, extracting the required data and
providing it to the host via other methods. SPI is used as an out-of-band
configuration channel.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:57 +01:00
Vikram N af9e53fef7 spi: omap2-mcspi: Fix modifying platform resource data
currently during probe the resource data gets modified and device
physical address remains valid only during first load. If the module is
unloaded and loaded again, the ioremp will be done on a incorrect address
as the resource was modified during previous module load.
This patch fixes this issue.

Signed-off-by: Vikram N <vicky773@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:51 +01:00
Heiner Kallweit 923ab15e1a spi: fsl-espi: fix handling of word sizes other than 8 bit
The code in fsl_espi_tx_buf_lsb and parts of fsl_espi_setup_transfer
look very weird and don't reflect the ESPI spec.
ESPI stores values with <= 8 bit word size right justified as 8 bit
value and values with > 8 bit word size right justified as 16 bit
value. Therefore no such shifting is needed.
Only case MSB-first with 8 bit word size is correctly handled,
and most likely nobody ever used this driver with a different config.

On ESPI only the case LSB-first with word size > 8 bit needs a
special handling. In this case a little endian 16 bit value has
to be written to the TX FIFO what requires a byte swap as the
host system is big endian.
The same applies to reading from the RX FIFO.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:37 +01:00
Heiner Kallweit e4be7053b9 spi: fsl-espi: reject MSB-first transfers with word sizes other than 8 or 16
According to the ESPI spec MSB-first transfers are supported for
word size 8 and 16 only.

Check for this and reject MSB-first transfers with other word sizes.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:37 +01:00
Heiner Kallweit b497eb0245 spi: fsl-espi: replace of_get_property with of_property_read_u32
of_property_read_u32 is better here than generic of_get_property:
- implicit endianness conversion if needed
- implicit checking of size of property

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:37 +01:00
Thor Thayer 8eee6b9dd3 spi: Add Flag to Enable Slave Select with GPIO Chip Select.
Some SPI masters require slave selection before the transfer
can begin [1]. The SPI framework currently selects the chip using
either 1) the internal CS mechanism or 2) the GPIO CS, but not both.

This patch adds a new master->flags define to indicate both the GPIO
CS and the internal chip select mechanism should be used.

Tested On:
    Altera CycloneV development kit
    Compile tested for build errors on x86_64 (allyesconfigs)

[1] DesignWare dw_apb_ssi Databook, Version 3.20a (page 39)

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-21 12:09:30 +01:00
Petr Mladek 3989144f86 kthread: kthread worker API cleanup
A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and workqueues.  Each
worker has a dedicated kthread.  It runs a generic function that process
queued works.  It is implemented as part of the kthread subsystem.

This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:

__init_kthread_worker()		-> __kthread_init_worker()
init_kthread_worker()		-> kthread_init_worker()
init_kthread_work()		-> kthread_init_work()
insert_kthread_work()		-> kthread_insert_work()
queue_kthread_work()		-> kthread_queue_work()
flush_kthread_work()		-> kthread_flush_work()
flush_kthread_worker()		-> kthread_flush_worker()

Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.

Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:

  + "init" in the function names stands for the verb "initialize"
    aka "initialize worker". While "INIT" in the macro names
    stands for the noun "INITIALIZER" aka "worker initializer".

  + INIT() macros are used only in DEFINE() macros

  + init() functions are used close to the other kthread()
    functions. It looks much better if all the functions
    use the same scheme.

  + There will be also kthread_destroy_worker() that will
    be used close to kthread_cancel_work(). It is related
    to the init() function. Again it looks better if all
    functions use the same naming scheme.

  + there are several precedents for such init() function
    names, e.g. amd_iommu_init_device(), free_area_init_node(),
    jump_label_init_type(),  regmap_init_mmio_clk(),

  + It is not an argument but it was inconsistent even before.

[arnd@arndb.de: fix linux-next merge conflict]
 Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-11 15:06:33 -07:00
Thor Thayer 80b444e579 spi: dw: Set GPIO_SS flag to toggle Slave Select on GPIO CS
The Designware SPI master requires slave selection before the transfer
can begin [1].

This patch uses the new master flag to indicate both the GPIO CS and
the internal chip select should be used.

Tested On:
    Altera CycloneV development kit
    Compile tested for build errors on x86_64 (allyesconfigs)

[1] DesignWare dw_apb_ssi Databook, Version 3.20a (page 39)

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-11 12:29:04 +02:00
Thor Thayer 6b1576aa87 spi: Add Flag to Enable Slave Select with GPIO Chip Select.
Some SPI masters require slave selection before the transfer
can begin [1]. The SPI framework currently selects the chip using
either 1) the internal CS mechanism or 2) the GPIO CS, but not both.

This patch adds a new master->flags define to indicate both the GPIO
CS and the internal chip select mechanism should be used.

Tested On:
    Altera CycloneV development kit
    Compile tested for build errors on x86_64 (allyesconfigs)

[1] DesignWare dw_apb_ssi Databook, Version 3.20a (page 39)

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-11 12:29:04 +02:00
Mark Brown 2ce0468433 Merge remote-tracking branches 'spi/topic/ti-qspi', 'spi/topic/tools', 'spi/topic/txx9' and 'spi/topic/xlp' into spi-next 2016-09-30 09:14:22 -07:00
Mark Brown 3424ff29a0 Merge remote-tracking branches 'spi/topic/rspi', 'spi/topic/sc18is602', 'spi/topic/sh-msiof', 'spi/topic/spidev-test' and 'spi/topic/st-ssc4' into spi-next 2016-09-30 09:14:18 -07:00
Mark Brown 66b5a337d0 Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/pic32-sqi', 'spi/topic/pxa2xx' and 'spi/topic/qup' into spi-next 2016-09-30 09:14:14 -07:00
Mark Brown e2df04ed3b Merge remote-tracking branches 'spi/topic/fsl-espi', 'spi/topic/imx', 'spi/topic/jcore', 'spi/topic/loopback' and 'spi/topic/meson' into spi-next 2016-09-30 09:14:10 -07:00
Mark Brown a931a189d4 Merge remote-tracking branches 'spi/topic/bcm', 'spi/topic/dw' and 'spi/topic/fsl-dspi' into spi-next 2016-09-30 09:14:08 -07:00
Mark Brown c5aee51b7a Merge remote-tracking branch 'spi/topic/dma' into spi-next 2016-09-30 09:14:07 -07:00
Phil Reid 76cce7e3a5 spi: sc18is602: Change gpiod_set_value to gpiod_set_value_cansleep
To avoid warning when using i2c gpio expander change call to the
cansleep variant. There should be no issue with sleeping in the
drivers probe function.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29 11:01:36 -07:00
Mika Westerberg 089bd46d8b spi: pxa2xx: Fix build error because of missing header
Kbuild test robot reports:

  drivers/spi/spi-pxa2xx.c: In function ‘setup_cs’:
  drivers/spi/spi-pxa2xx.c:1190:20: error: implicit declaration of function ‘desc_to_gpio’
  ...

Reason for this is the fact that those functions are declared in
linux/gpio/consumer.h which is not included in the driver. Fix this by
including it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-29 11:00:41 -07:00
Wei Yongjun 446576f9ea spi: imx: fix error return code in spi_imx_probe()
Fix to return error code -EINVAL if no CS GPIOs available
instead of 0, as done elsewhere in this function.

Fixes: f13d4e189d ("spi: imx: Gracefully handle NULL master->cs_gpios")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-28 09:50:55 -07:00
Mika Westerberg 99f499cd65 spi: pxa2xx: Add support for GPIO descriptor chip selects
The driver uses custom chip_info coming from platform data for chip selects
implemented as GPIOs. If the system lacks board files setting up the
platform data, it is not possible to use GPIOs as chip selects.

This adds support for GPIO descriptors so that regardless of the underlying
firmware interface (DT, ACPI or platform data) the driver can request GPIOs
used as chip selects and configure them accordingly.

The custom chip_info GPIO support is still left there to make sure the
existing systems keep working as expected.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26 09:11:14 -07:00
Marek Vasut f13d4e189d spi: imx: Gracefully handle NULL master->cs_gpios
It is possible that master->cs_gpios is NULL after spi_bitbang_start(),
this happens if the master has no CS GPIOs specified in DT. Check for
this case after spi_bitbang_start() to prevent NULL pointer dereference
in the subsequent for loop, which accesses the master->cs_gpios field.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Martin Kaiser <martin@kaiser.cx>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26 09:08:46 -07:00
Kamal Dasu cc20a38612 spi: iproc-qspi: Add Broadcom iProc SoCs support
This spi driver uses the common spi-bcm-qspi driver and implements iProc
SoCs specific interrupt controller. The common driver now calls the SoC
handlers when present. Adding support for both muxed l1 and unmuxed interrupt
sources.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 20:03:25 +01:00
Heiner Kallweit 604042af76 spi: fsl-espi: improve return value handling in fsl_espi_probe
The return value of fsl_espi_probe (currently struct spi_master *)
is just used for checking whether an error occurred.
Change the return value type to int and simplify the code.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:48:32 +01:00
Heiner Kallweit acf692190f spi: fsl-espi: simplify of_fsl_espi_probe
Simplify of_fsl_espi_probe.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:48:31 +01:00
Heiner Kallweit fb8ac912df spi: fsl-espi: remove unused variable in fsl_espi_setup
Remove an unused variable.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24 19:47:07 +01:00
Wei Yongjun 71b8f350a4 spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 17:23:11 +01:00
Wei Yongjun 3bf3eb2b95 spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
In case of error, the function kcalloc() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 17:23:11 +01:00
Arnd Bergmann a0319f8b12 spi: bcm-qspi: fix suspend/resume #ifdef
The two power management functions are define inside of an #ifdef
but referenced unconditionally, which is obviously broken when
CONFIG_PM_SLEEP is not set:

drivers/spi/spi-bcm-qspi.c:1300:13: error: 'bcm_qspi_suspend' undeclared here (not in a function)
drivers/spi/spi-bcm-qspi.c:1301:13: error: 'bcm_qspi_resume' undeclared here (not in a function)

This replaces the #ifdef with a __maybe_unused annotation that lets
the compiler figure out whether to drop the functions itself,
and uses SIMPLE_DEV_PM_OPS() to refer to the functions.

This will also fill the freeze/thaw/poweroff/restore callback
pointers in addition to suspend/resume, but as far as I can tell,
this is what we want.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fa236a7ef2 ("spi: bcm-qspi: Add Broadcom MSPI driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 16:47:09 +01:00
Arnd Bergmann c0a75d072a spi: bcm-qspi: don't include linux/mtd/cfi.h
The header isn't actually needed here, but including it leads
to a build warning when CONFIG_MTD is disabled:

include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]

Fixes: fa236a7ef2 (spi: bcm-qspi: Add Broadcom MSPI driver)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-16 16:27:01 +01:00
Heiner Kallweit 81abc2ecac spi: fsl-espi: improve and extend register bit definitions
Add definition of further register bits for use in upcoming
driver extensions and improve current bit definitions:
- use BIT macro
- use bit names as in the chip spec

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:48 +01:00
Heiner Kallweit 46afd38b7d spi: fsl-espi: align register access with other drivers
Change register access to the method used in other drivers too.
- use register names as in the chip spec for constants
- avoid hard to read statements like
  __be32 __iomem *espi_mode = &reg_base->mode
- get rid of old powerpc-specific functions like in_8

In addition annotate reg_base in struct mpc8xxx_spi as __iomem.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:47 +01:00
Heiner Kallweit 35f5d71e38 spi: fsl-espi: improve and simplify interrupt handler
Simplify the interrupt handler a little. In addition don't call
fsl_espi_cpu_irq() if no event bit is set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:47 +01:00
Heiner Kallweit d198ebfb75 spi: fsl-espi: simplify fsl_espi_setup_transfer
If t is not null then the SPI core takes care that bits_per_word and
speed_hz are populated. This allows to simplify fsl_espi_setup_transfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:24:46 +01:00
Martin Kaiser 15ca92156e spi: imx: support loopback mode on imx35
imx35 and compatible chipsets support loopback mode by setting a
loopback control bit in the test register. Make this setting available
for data transfers, similar to what we do for imx51.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:06:16 +01:00
Martin Kaiser 2636ba8fa3 spi: imx: set spi_bus_clk for mx1, mx31 and mx35
Modify spi_imx_clkdiv_2() to return the resulting bus clock frequency
when the selected clock divider is applied. Set spi_imx->spi_bus_clk to
this frequency.

If spi_bus_clk is unset, spi_imx_calculate_timeout() causes a
division by 0.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:06:11 +01:00
Kamal Dasu 4e3b2d236f spi: bcm-qspi: Add BSPI spi-nor flash controller driver
This change implements BSPI driver for Broadcom BRCMSTB, NS2,
NSP SoCs works in combination with the MSPI controller driver
and implements flash read acceleration and implements  the
spi_flash_read() method. Both MSPI and BSPI controllers are
needed to access spi-nor flash.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Kamal Dasu 44f95d87a6 spi: brcmstb-qspi: Broadcom settop platform driver
Adding the settop SoC platfrom driver, this driver is compatible
with the settop MSPI+BSPI and MSPI only blocks implemented on the
SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Kamal Dasu fa236a7ef2 spi: bcm-qspi: Add Broadcom MSPI driver
Master SPI driver for Broadcom settop, iProc SoCs. The driver
is used for devices that use SPI protocol on BRCMSTB, NSP, NS2
SoCs. SoC platform driver call exported porbe(), remove()
and suspend/resume pm_ops implemented in this common driver.

Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Yendapally Reddy Dhananjaya Reddy
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 18:03:32 +01:00
Axel Lin 4253168663 spi: st-ssc4: Fix misuse of devm_gpio_request/devm_gpio_free APIs
devm_* API is supposed to be used only in probe function call.
The resource is allocated at 'probe' and free automatically at 'remove'.
Usage of devm_* functions outside probe sometimes leads to resource leak.
Thus avoid using devm_* APIs in .setup/.cleanup callbacks.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-14 16:05:35 +01:00
Neil Armstrong 2f58ea64bd spi: meson: Add GXBB compatible
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:11:39 +01:00
Heiner Kallweit 38d003f1a4 spi: fsl-espi: merge fsl_espi_trans and fsl_espi_do_trans
Merge both functions to reduce source code size and improve
readability.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:50 +01:00
Heiner Kallweit 06af115d6c spi: fsl-espi: improve message length handling
Move checking for a zero-length message up in the call chain and
use m->frame_length instead of re-calculating the overall length
of all transfers in the message.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit cce7e3a2fe spi: fsl-espi: factor out handling of read data
Factor out copying read data to the read buffers in the original
message to a new function fsl_espi_copy_from_buf.
This also allows to simplify fsl_espi_copy_to_buf.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit 96361fafbb spi: fsl-espi: centralize populating struct spi_transfer
Better structure the code by population all elements of struct
spi_transfer in one place.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:49 +01:00
Heiner Kallweit d3152cf1c8 spi: fsl-espi: factor out initial message checking
Checking the message is currently done at diffrent places in the
driver. Factor it out to fsl_espi_check_message.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:03:48 +01:00
Andy Shevchenko 7c7289a404 spi: pxa2xx: Default thresholds to PXA configuration
Most of the devices in the supported list have PXA configuration of FIFO. In
particularly Intel Medfield and Merrifield have bigger FIFO, than it's defined
for CE4100.

Split CE4100 in the similar way how it was done for Intel Quark, i.e. prefix
definitions by CE4100 and append necessary pieces of code to switch case
conditions.

We are on safe side since those bits are ignored on all LPSS IPs.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:43 +01:00
Jarkko Nikula 96579a4e56 spi: pxa2xx: Remove pointer to chip data from driver data
Transfer state machine in this driver does not need to set/unset pointer
to chip data between queueing and finalizing message as it is not
actually used as a state info itself but just pointer passing.

Since this per SPI device specific chip data is already carried in
ctldata use that and remove pointer to chip data from driver data.

While at it, group initialized variables before uninitialized variables
in pump_transfers().

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula 4fc0caac06 spi: pxa2xx: Remove pointer to current SPI message from driver data
There is no need to carry pointer to current SPI message in driver data
because cur_msg in struct spi_master holds it already when driver is using
the message queueing infrastructure from the SPI core.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Jarkko Nikula bffc967e93 spi: pxa2xx: Do not needlessly initialize stack variables
All of these variables are unconditionally set before their use.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 20:01:27 +01:00
Matthias Seidel 3aef463222 spi: dw: round up result of calculation for clock divider
Avoid ending up with a higher frequency than requested

Signed-off-by: Matthias Seidel <kernel@mseidel.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:59:08 +01:00
Heiner Kallweit 5bcc6a2f06 spi: fsl-espi: merge fsl_espi_bufs and fsl_espi_cpu_bufs
fsl_espi_bufs and fsl_espi_cpu_bufs are very small that we can merge them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 84ccfc371f spi: fsl-espi: improve return value handling in fsl_espi_bufs
Return a proper status code from fsl_espi_bufs instead of returning
the number of remaining words and let the caller evaluate it.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 809b1e017b spi: fsl-espi: merge fsl_espi_cmd_trans and fsl_espi_rw_trans
fsl_espi_cmd_trans and fsl_espi_rw_trans share most of the code so
we can merge them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit faceef3907 spi: fsl-espi: eliminate struct fsl_espi_transfer
The remaining elements of struct fsl_espi_transfer are part of struct
spi_transfer anyway. So we can get rid of struct fsl_espi_transfer
and use a struct spi_transfer only.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 5cd7b8be6b spi: fsl-espi: remove element actual_length from struct fsl_espi_trans
If an error occurs during processing the message, then we don't have
to populate the actual_length element of struct message.
So we can get rid of element actual_length in struct
fsl_espi_transfer.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 0319d4991e spi: fsl-espi: fix status handling in fsl_espi_do_one_msg
If an error occurred during message handling return this error instead
of always returning 0 and align the code with the generic
implementation in spi_transfer_one_message.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit e33a3ade90 spi: fsl-espi: remove element status from struct fsl_espi_transfer
Use the return values of the functions in the call chain to transport
status information instead of using an element in struct
fsl_espi_transfer for this.

This is more in line with the general approach how to handle status
information and is one step further to eventually get rid of
struct fsl_espi_transfer completely.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 7c159aa8c1 spi: fsl-espi: factor out filling the local buffer
Better structure the code by factoring out filling the local buffer.

In addition don't initialize the complete local buffer at the
beginning of fsl_espi_do_one_msg. Instead move initialization of
those parts of the local buffer to be used for transfers w/o tx_buf
to fsl_espi_copy_to_buf.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Heiner Kallweit 1423877b73 spi: fsl-espi: pre-allocate message buffer
Currently the driver allocates a 64kb buffer for each single message.
On systems with little and fragmented memory this can result in
memory allocation errors. Solve this by pre-allocating a buffer.

This patch was developed in OpenWRT long ago, however it never
made it upstream.

I slightly modified the original patch to re-initialize the buffer
at the beginning of each transfer.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-12 19:58:45 +01:00
Mark Brown ae4860b533 Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', 'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus 2016-09-06 12:32:09 +01:00
Heiner Kallweit 71581a1507 spi: fsl-espi: remove unneeded check in fsl_espi_do_trans
SPI core takes care that both values are always populated.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06 11:55:20 +01:00
Heiner Kallweit a755af52f8 spi: fsl-espi: simplify fsl_espi_setup_transfer
Simplify fsl_espi_setup_transfer a little.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06 11:55:20 +01:00
Heiner Kallweit daae020ce9 spi: fsl-espi: remove unused elements n_rx and n_tx in struct fsl_espi_transfer
Both elements are not used, so remove them.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06 11:55:20 +01:00
Matthias Seidel 13b10301b8 spi: dw: fix multiple slaves with different baudrates
Add current master clock to dws struct and compare it against the
requestedtransfer speed. Update clock divider only if necessary.

Signed-off-by: Matthias Seidel <kernel@mseidel.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-06 11:53:50 +01:00
Sien Wu d0716dde37 spi: Prevent unexpected SPI time out due to arithmetic overflow
When reading SPI flash as MTD device, the transfer length is
directly passed to the spi driver. If the requested data size
exceeds 512KB, it will cause the time out calculation to
overflow since transfer length is 32-bit unsigned integer.
This issue is resolved by using 64-bit unsigned integer
to perform the arithmetic.

Signed-off-by: Sien Wu <sien.wu@ni.com>
Acked-by: Brad Keryan <brad.keryan@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>

Natinst-ReviewBoard-ID 150232
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-03 11:58:13 +01:00
Sudeep Holla 9d04d8bc4c spi: qup: skip clk_disable_unprepare if the device is already runtime suspended
If the spi device is already runtime suspended, if spi_qup_suspend is
executed during suspend-to-idle or suspend-to-ram it will result in the
a splat from unpreparing a non-prepared clock.

This patch fixes the issue by executing clk_disable_unprepare conditionally
in spi_qup_suspend.

[Reworded commit message to remove irrelevant backtrace -- broonie]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:29:11 +01:00
Heiner Kallweit dbd4fefb5b spi: fsl-espi: remove unneeded variable in fsl_espi_do_trans
Creating a message, adding one transfer, and then iterating over
all transfers in the message doesn't make sense.
We can simply use the original transfer directly.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:15:58 +01:00
Heiner Kallweit 10ed1e6d32 spi: fsl-espi: add missing static declaration to fsl_espi_cpu_irq
Add missing static declaration to fsl_espi_cpu_irq.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:15:58 +01:00
Heiner Kallweit bbb55f6d62 spi: fsl-espi: change return type of fsl_espi_cpu_bufs to void
fsl_espi_cpu_bufs always returns 0, so change the return type to void.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:15:58 +01:00
Heiner Kallweit ea616ee220 spi: fsl-espi: change return type of fsl_espi_setup_transfer to void
fsl_espi_setup_transfer always returns 0, so change the return type
to void.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:15:58 +01:00
Heiner Kallweit 6bdf03b30e spi: fsl-espi: dont include irq.h
irq.h isn't needed and it even shouldn't be included, see comment
at the beginning of this header file.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 21:13:48 +01:00
Baoyou Xie dc34b89a8c spi: loopback-test: mark rx_ranges_cmp() static
We get 1 warning when building kernel with W=1:
drivers/spi/spi-loopback-test.c:408:5: warning: no previous prototype for 'rx_ranges_cmp' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 20:54:54 +01:00
Geert Uytterhoeven 6ffc84dd15 spi: sh-msiof: Use ARCH_SHMOBILE instead of SUPERH
"spi_sh_msiof" is used on sh7723 and sh7724 only. As all of the above
select ARCH_SHMOBILE, restrict its driver dependencies from SUPERH to
ARCH_SHMOBILE.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 20:53:52 +01:00
Phil Reid f99008013e spi: sc18is602: Add reset control via gpio pin.
This sc18is602 has a reset pin that may need to be deasserted.
Add optional binding to specifiy the reset pin via a gpio and deassert
during probe.

Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-01 20:53:31 +01:00
Wei Yongjun 568852b700 spi: spi-cavium-thunderx: Add missing clk_disable_unprepare()
Add the missing clk_disable_unprepare() before return in the probe
error handling case and remove.

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-24 12:37:43 +01:00
Andy Shevchenko b70cd2de0e spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices
Slave devices are not enumerated by ACPI data because the ACPI handle for the
core driver is NULL if it was enumerated by PCI.

Propagate firmware node handle of the PCI device to the platform device.

Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-24 12:20:03 +01:00
Wei Yongjun 6999aeabbb spi: spi-fsl-dspi: Drop extra spi_master_put in device remove function
The call sequence spi_alloc_master/spi_register_master/spi_unregister_master
is complete; it reduces the device reference count to zero, which and results
in device memory being freed. The subsequent call to spi_master_put is
unnecessary and results in an access to free memory. Drop it.

Fixes: 9298bc7273 ("spi: spi-fsl-dspi: Remove spi-bitbang")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-22 17:45:22 +01:00
Fabio Estevam 1c5ea2b4de spi: spi-fsl-dspi: Check clk_prepare_enable() error
clk_prepare_enable() may fail, so we should better check its
return value and propagate it in the case of failure.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-22 17:32:42 +01:00
Jan Glauber 7347a6c7af spi: octeon: Add ThunderX driver
Add ThunderX SPI driver using the shared part from the Octeon
driver. The main difference of the ThunderX driver is that it
is a PCI device so probing is different. The system clock settings
can be specified in device tree.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-19 16:24:39 +01:00
Geert Uytterhoeven 1ae4ec1415 spi: spi-txx9: Add missing clock (un)prepare calls for CCF
While the custom minimal TXx9 clock implementation doesn't need or use
clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE),
they are mandatory when using the Common Clock Framework.

Hence add them, to prepare for the advent of CCF.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18 19:10:39 +01:00
Heiner Kallweit 02a595d5d6 spi: fsl-espi: eliminate spi nor flash read loop
The fsl-espi driver contains a read loop that implicitely assumes that
the device to read from is a m25p80 SPI NOR flash (bytes 2 - 4 of the
first write transfer are interpreted as 3 byte flash address).

Now that we have such a read loop in the spi-nor driver and are able
to correctly indicate the message size limit of the controller,
the read loop can be removed from the fsl-espi driver.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-18 11:15:16 +01:00
Vignesh R 5720ec0a6d spi: spi-ti-qspi: Add DMA support for QSPI mmap read
Use mem-to-mem DMA to read from flash when reading in mmap mode. This
gives improved read performance and reduces CPU load.

With this patch the raw-read throughput is ~16MB/s on DRA74 EVM. And CPU
load is <20%. UBIFS read throughput ~13 MB/s.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-17 12:24:28 +01:00
Vignesh R b1b8153cf0 spi: Add support to handle kmap'd buffers in spi_map_buf()
JFFS2 FS might sometime provide kmap'd buffers as destination
buffers to read data from flash. Update spi_map_buf() function to
generate sg_list for such buffers, so that SPI controllers drivers can
use DMA to read data into such buffers.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-17 12:24:01 +01:00
LABBE Corentin 53d8916075 spi: spi-fsl-dspi: fix a possible NULL dereference
of_match_device could return NULL, and so cause a NULL pointer
dereference later.

For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.

Reported-by: coverity (CID 1324129)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16 12:26:59 +01:00
LABBE Corentin 94b968b5a3 spi: spi-fsl-dspi: constify devtype_data
of_id->data is const, so instead of casting the pointer to drop its
const status, this patch constify the devtype_data pointer.

Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-16 12:26:59 +01:00
Mark Brown 764f21665a spi: Drop io_mutex in error paths
A couple of error paths were missing drops of io_mutex.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09 17:45:33 +01:00
Kamlakant Patel 097d06192c spi: xlp: Add ACPI support for Vulcan SPI controller
Add ACPI support for SPI controller on Broadcom Vulcan ARM64.

Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09 15:25:43 +01:00
Wei Yongjun f75529fd71 spi: jcore: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-09 10:40:05 +01:00
Chris Brandt aeb8f8cb15 spi: rspi: Increase accuracy of bit rate for RZ
When you leave the clock divider at 0, 130kHz is the lowest you can go.
Also, by adjusting the clock divider you can get more accurate resolutions
for clock speeds lower than 16MHz. This patch uses the clock divider as
part of the bit rate setup.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08 11:56:46 +01:00
Wei Yongjun a3cfea0448 spi: pic32-sqi: use list_move_tail and list_move
Using list_move_tail() and list_move() to simplify the code.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08 11:56:40 +01:00
Rich Felker 2cb1b3b3ac spi: add driver for J-Core SPI controller
The J-Core "spi2" device is a PIO-based SPI master controller. It
differs from "bitbang" devices in that that it's clocked in hardware
rather than via soft clock modulation over gpio, and performs
byte-at-a-time transfers between the cpu and SPI controller.

This driver will be extended to support future versions of the J-Core
SPI controller with DMA transfers when they become available.

Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-08 11:56:32 +01:00
Geert Uytterhoeven c3ccf357c3 spi: sh-msiof: Avoid invalid clock generator parameters
The conversion from a look-up table to a calculation for clock generator
parameters forgot to take into account that BRDV x 1/1 is valid only if
BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary
clock rates).

This limitation is documented for the MSIOF module in all supported
SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs.

Tested on r8a7791/koelsch and r8a7795/salvator-x.

Fixes: 65d5665bb2 ("spi: sh-msiof: Update calculation of frequency dividing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-08-05 11:46:07 +01:00
Linus Torvalds 043248cd4e ARM: DT updates for v4.8
Device tree contents continue to be the largest branches we submit. This
 time around, some of the contents worth pointing out is:
 
 - New SoC platforms:
   - Freescale i.MX 7Solo
   - Broadcom BCM23550
   - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_
   - Hisilicon HI3519
   - Renesas R8A7792
 
 Some of the other delta that is sticking out, line-count wise:
  - Exynos moves of IP blocks under an SoC bus, which causes a large delta due
    to indentation changes
  - A new Tegra K1 board: Apalis
  - A bunch of small updates to many Allwinner platforms; new hardware support,
    some cleanup, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnnckAAoJEIwa5zzehBx3Ss0P/1hp+n8DMuNCHReof8u2D3xf
 pi9t5vNzfODMq/YrDT3bzQ3txoEZISt+ztEFku26BUywCZbeIEx+XLPewVEj0ODc
 tpWKmW2xNZDIwn2eHRrBD5Y8gJugAnwgwBh9SqfcM8Wtdt2qc7edBvcxLhsiCTuV
 pKPxPoJkan/BMR3vBMfoLIx/+aDcZJgpzUkRRuyLod17JdQ0tnMECu5UPrk6Yun8
 IjDcJTcwZlpZ9gvtBhxyGUENOPtmGH2ZvZuBPisr7Mwih4mDNJJ/9YrnsdfdYWaf
 WAysPGXYMfQy9jMiAC1cBm+jeIPvbIeZpYRzPt3vlFKAHpAZG1sp+r7SLfrT9e7x
 7La/QPNVLMsKTjGMW82/qRzOXBed3htk9v2YPIHQubFIOOz2mXqwSPXCqUHuYKeU
 eqzedvm0FGoeJbYTzpYyRAWU9OQtazOR+WAI8PrZiN4tdaxvYT2F5JJCMztYIoeq
 SJdPUbWTsYxkc/Kj1FagW0LOydO40Aif53JbfrabnzcRYlWsxqQfaSsP8J8G4QDq
 zXZvbt0IMan2B52X7AysDF8Zq4Ti8dVijvA7XNl7b5HFBrRpbOt9Tdhl/4zRiW14
 Y16VswnIR+9qPhtSXiSkdOwB/0cAI6XEiBTgRunYccakGDUfLOEpIVqJJ1zGNHpl
 hqJum3pAMW8i5JX8vl8J
 =C4NU
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Device tree contents continue to be the largest branches we submit.
  This time around, some of the contents worth pointing out is:

  New SoC platforms:
   - Freescale i.MX 7Solo
   - Broadcom BCM23550
   - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_
   - Hisilicon HI3519
   - Renesas R8A7792

  Some of the other delta that is sticking out, line-count wise:
   - Exynos moves of IP blocks under an SoC bus, which causes a large
     delta due to indentation changes
   - a new Tegra K1 board: Apalis
   - a bunch of small updates to many Allwinner platforms; new hardware
     support, some cleanup, etc"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits)
  ARM: dts: sun8i: Add dts file for inet86dz board
  ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet
  ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts
  ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04
  ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply
  ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi
  ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts
  ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts
  ARM: dts: sun5i: reference-design-tablet: Remove mention of q8
  ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc
  ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi
  ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts
  ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi
  ARM: dts: at91: Don't build unnecessary dtbs
  ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions
  ARM: dts: at91: at91sam9g25ek: fix isi endpoint node
  ARM: dts: at91: move isi definition to at91sam9g25ek
  ARM: dts: at91: fix i2c-gpio node name
  ARM: dts: at91: vinco: fix regulator name
  ARM: dts: at91: ariag25 : fix onewire node
  ...
2016-08-01 18:37:45 -04:00
Linus Torvalds 7ae0ae4a02 spi: Updates for v4.8
Quite a lot of cleanup and maintainence work going on this release in
 various drivers, and also a fix for a nasty locking issue in the core:
 
  - A fix for locking issues when external drivers explicitly locked the
    bus with spi_bus_lock() - we were using the same lock to both control
    access to the physical bus in multi-threaded I/O operations and
    exclude multiple callers.  Confusion between these two caused us to
    have scenarios where we were dropping locks.  These are fixed by
    splitting into two separate locks like should have been done
    originally, making everything much clearer and correct.
  - Support for DMA in spi_flash_read().
  - Support for instantiating spidev on ACPI systems, including some test
    devices used in Windows validation.
  - Use of the core DMA mapping functionality in the McSPI driver.
  - Start of support for ThunderX SPI controllers, involving a very big
    set of changes to the Cavium driver.
  - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036,
    RK3228, RK3368 controllers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXmPFBAAoJECTWi3JdVIfQbisH/355nT/cyqc08l9iC+a1zRDw
 /Bf5kN8pqmu6+y3sMjAIdptZQTlXhgR4q1ZH+oNSfowCVgvJYWF6RVCEXDBh6XHs
 YBQAFlYeSOO5cLTPQSDnn06oFucV/HZJppC6hM0SNclbVboeMBBS6S6aljXqMbj+
 mFvtq6/iEsG6kgQcmcl3fm/SMOYF2OFDJyr66NimBXQGzjx84xJcG0eGk8kCIwEw
 xyiE/WmB9WT2scFSgAsfaOEE27ozaq9iANNUA/ceUibQgQYpQveBgy4XVXFjEzFo
 3BVvPYGGzjebzaXbMwDV6OvSgMwnTsMxjtZGsraxIEOcMdeeMEpn1/Ze4ksWi4c=
 =R4Zx
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Quite a lot of cleanup and maintainence work going on this release in
  various drivers, and also a fix for a nasty locking issue in the core:

   - A fix for locking issues when external drivers explicitly locked
     the bus with spi_bus_lock() - we were using the same lock to both
     control access to the physical bus in multi-threaded I/O operations
     and exclude multiple callers.

     Confusion between these two caused us to have scenarios where we
     were dropping locks.  These are fixed by splitting into two
     separate locks like should have been done originally, making
     everything much clearer and correct.

   - Support for DMA in spi_flash_read().

   - Support for instantiating spidev on ACPI systems, including some
     test devices used in Windows validation.

   - Use of the core DMA mapping functionality in the McSPI driver.

   - Start of support for ThunderX SPI controllers, involving a very big
     set of changes to the Cavium driver.

   - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036,
     RK3228, RK3368 controllers"

* tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
  spi: Split bus and I/O locking
  spi: octeon: Split driver into Octeon specific and common parts
  spi: octeon: Move include file from arch/mips to drivers/spi
  spi: octeon: Put register offsets into a struct
  spi: octeon: Store system clock freqency in struct octeon_spi
  spi: octeon: Convert driver to use readq()/writeq() functions
  spi: pic32-sqi: fixup wait_for_completion_timeout return handling
  spi: pic32: fixup wait_for_completion_timeout return handling
  spi: rockchip: limit transfers to (64K - 1) bytes
  spi: xilinx: Return IRQ_NONE if no interrupts were detected
  spi: xilinx: Handle errors from platform_get_irq()
  spi: s3c64xx: restore removed comments
  spi: s3c64xx: add Exynos5433 compatible for ioclk handling
  spi: s3c64xx: use error code from clk_prepare_enable()
  spi: s3c64xx: rename goto labels to meaningful names
  spi: s3c64xx: document the clocks and the clock-name property
  spi: s3c64xx: add exynos5433 spi compatible
  spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()
  spi: spi-sh: Remove deprecated create_singlethread_workqueue
  spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue
  ...
2016-07-27 14:11:43 -07:00
Wei Yongjun 2932c28710 spi: img-spfi: Remove spi_master_put in img_spfi_remove()
The call to spi_master_put() in img_spfi_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in img_spfi_remove().

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-27 19:00:16 +01:00
Wei Yongjun c2b08cede7 spi: mediatek: remove spi_master_put in mtk_spi_remove()
The call to spi_master_put() in mtk_spi_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in mtk_spi_remove().

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-27 19:00:16 +01:00
Wei Yongjun 6678716751 spi: qup: Remove spi_master_put in spi_qup_remove()
The call to spi_master_put() in spi_qup_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in spi_qup_remove().

This is detected by Coccinelle semantic patch.

Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-27 19:00:13 +01:00
Rafael J. Wysocki d5f017b796 Merge branch 'acpi-tables'
* acpi-tables:
  ACPI: Rename configfs.c to acpi_configfs.c to prevent link error
  ACPI: add support for loading SSDTs via configfs
  ACPI: add support for configfs
  efi / ACPI: load SSTDs from EFI variables
  spi / ACPI: add support for ACPI reconfigure notifications
  i2c / ACPI: add support for ACPI reconfigure notifications
  ACPI: add support for ACPI reconfiguration notifiers
  ACPI / scan: fix enumeration (visited) flags for bus rescans
  ACPI / documentation: add SSDT overlays documentation
  ACPI: ARM64: support for ACPI_TABLE_UPGRADE
  ACPI / tables: introduce ARCH_HAS_ACPI_TABLE_UPGRADE
  ACPI / tables: move arch-specific symbol to asm/acpi.h
  ACPI / tables: table upgrade: refactor function definitions
  ACPI / tables: table upgrade: use cacheable map for tables

Conflicts:
	arch/arm64/include/asm/acpi.h
2016-07-25 13:41:01 +02:00
Mark Brown dec34e8b67 Merge remote-tracking branch 'spi/fix/locking' into spi-next 2016-07-25 11:48:51 +01:00
Mark Brown ef4d96ec4a spi: Split bus and I/O locking
The current SPI code attempts to use bus_lock_mutex for two purposes. One
is to implement spi_bus_lock() which grants exclusive access to the bus.
The other is to serialize access to the physical hardware. This duplicate
purpose causes confusion which leads to cases where access is not locked
when a caller holds the bus lock mutex. Fix this by splitting out the I/O
functionality into a new io_mutex.

This means taking both mutexes in the DMA path, replacing the existing
mutex with the new I/O one in the message pump (the mutex now always
being taken in the message pump) and taking the bus lock mutex in
spi_sync(), allowing __spi_sync() to have no mutex handling.

While we're at it hoist the mutex further up the message pump before we
power up the device so that all power up/down of the block is covered by
it and there are no races with in-line pumping of messages.

Reported-by: Rich Felker <dalias@libc.org>
Tested-by: Rich Felker <dalias@libc.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-25 11:47:52 +01:00
Mark Brown 56432b7324 Merge remote-tracking branch 'spi/topic/xilinx' into spi-next 2016-07-24 22:08:30 +01:00
Mark Brown 1cb2e84873 Merge remote-tracking branches 'spi/topic/spidev', 'spi/topic/sunxi', 'spi/topic/ti-qspi', 'spi/topic/topcliff-pch' and 'spi/topic/txx9' into spi-next 2016-07-24 22:08:27 +01:00
Mark Brown 9a4506b60d Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/rockchip', 'spi/topic/s3c64xx', 'spi/topic/sh' and 'spi/topic/sh-msiof' into spi-next 2016-07-24 22:08:25 +01:00
Mark Brown ac3e62b820 Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/omap2-mcspi', 'spi/topic/orion', 'spi/topic/pic32' and 'spi/topic/pic32-sqi' into spi-next 2016-07-24 22:08:22 +01:00
Mark Brown e350817b7c Merge remote-tracking branches 'spi/topic/flash-dma', 'spi/topic/imx', 'spi/topic/loopback', 'spi/topic/maintainers' and 'spi/topic/mpc52xx-psc' into spi-next 2016-07-24 22:08:20 +01:00
Mark Brown ea9972df79 Merge remote-tracking branches 'spi/topic/bfin-sport', 'spi/topic/bfin5xx', 'spi/topic/clps711x', 'spi/topic/doc' and 'spi/topic/dt' into spi-next 2016-07-24 22:08:18 +01:00
Mark Brown 421c65fdee Merge remote-tracking branches 'spi/fix/pax2xx' and 'spi/fix/rockchip' into spi-linus 2016-07-24 22:08:16 +01:00
Jan Glauber 63d49afefc spi: octeon: Split driver into Octeon specific and common parts
Separate driver probing from SPI transfer functions.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:54:29 +01:00
Jan Glauber 22cc1b6b35 spi: octeon: Move include file from arch/mips to drivers/spi
Move the register definitions to the drivers directory because they
are only used there.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:54:29 +01:00
Jan Glauber ee423c5322 spi: octeon: Put register offsets into a struct
Instead of hard-coding the register offsets put them into a struct
and set them in the probe function.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:54:29 +01:00
Jan Glauber b9e64763b6 spi: octeon: Store system clock freqency in struct octeon_spi
Storing the system clock frequency in struct octeon_spi avoids
calling the MIPS specific octeon_get_io_clock_rate() for every transfer.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Tested-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:54:29 +01:00
Steven J. Hill 187fc9b374 spi: octeon: Convert driver to use readq()/writeq() functions
Remove all calls to cvmx_read_csr()/cvmx_write_csr() and use
the portable readq()/writeq() functions.

Signed-off-by: Steven J. Hill <steven.hill@cavium.com>
Signed-off-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:54:29 +01:00
Nicholas Mc Guire 33d5097dbf spi: pic32-sqi: fixup wait_for_completion_timeout return handling
wait_for_completion_timeout returns unsigned long not int so the check for
<= 0 should be == 0 here, and the type unsigned long. The function return
is set to -ETIMEDOUT to reflect the actual problem.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:49:57 +01:00
Nicholas Mc Guire 57c2b0ddd1 spi: pic32: fixup wait_for_completion_timeout return handling
wait_for_completion_timeout returns unsigned long not int so the check for
<= 0 should be == 0 here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-24 21:49:16 +01:00
Brian Norris 5185a81c02 spi: rockchip: limit transfers to (64K - 1) bytes
The Rockchip SPI controller's length register only supports 16-bits,
yielding a maximum length of 64KiB (the CTRLR1 register holds "length -
1"). Trying to transfer more than that (e.g., with a large SPI flash
read) will cause the driver to hang.

Now, it seems that while theoretically we should be able to program
CTRLR1 with 0xffff, and get a 64KiB transfer, but that also seems to
cause the core to choke, so stick with a maximum of 64K - 1 bytes --
i.e., 0xffff.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-20 17:42:47 +01:00
Lars-Peter Clausen d336484785 spi: xilinx: Return IRQ_NONE if no interrupts were detected
Return IRQ_NONE from the interrupt handler if the handler is running, but
no interrupt was detected. This allows the system to recover in case of an
interrupt storm due to an invalid interrupt configuration or faulty
hardware.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 11:45:00 +01:00
Lars-Peter Clausen 4db9bf548b spi: xilinx: Handle errors from platform_get_irq()
The Xilinx SPI driver can operate without an IRQ, but not every error
returned by platform_get_irq() means that no IRQ was specified. It will
also return an error if the IRQ specification is invalid or the IRQ
provider is not yet available (EPROBE_DEFER).

So instead of ignoring all errors only ignore ENXIO, which means no IRQ was
specified, and propagate all other errors to device driver core.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-15 11:44:59 +01:00
Andi Shyti 0dbe70a1fe spi: s3c64xx: restore removed comments
Patch a9e93e8 has erroneously removed some comments which are
important to understand why the bus frequency is multiplied by
two during the spi transfer.

Reword the previous comment to a more appropriate message.

Suggested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14 17:28:32 +01:00
Andi Shyti 7990b00819 spi: s3c64xx: add Exynos5433 compatible for ioclk handling
The new compatible is related to the Samsung Exynos5433 SoC. The
difference between the previous is that in the exynos5433 the SPI
controller is driven by three clocks instead of only one.

The new clock (ioclk) is controlling the input/output clock
whenever the controller is slave or master.

The presence of the clock line is detected from the compatibility
structure (exynos5433_spi_port_config) as a boolean value.

The probe function checks whether the ioclk is present and if so,
it acquires.

The runtime suspend and resume functions will handle the clock
enabling and disabling as well.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14 17:28:32 +01:00
Andi Shyti 25981d8281 spi: s3c64xx: use error code from clk_prepare_enable()
If clk_prepare_enable() fails do not return -EBUSY but use the
value provided by the function itself.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14 17:28:31 +01:00
Andi Shyti 60a9a96442 spi: s3c64xx: rename goto labels to meaningful names
The goto labels of the style of

  err4:
  err3:
  err2:
  err1:

are complex to insert in between new errors without renaming all
the goto statements. Replace the errX naming style to meaningful
names in order to make it easier to insert new goto exit points.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14 17:28:31 +01:00
Wei Yongjun 9f135787b1 spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()
Once a spi_master_get() call succeeds, we need an additional
spi_master_put() call to free the memory, otherwise we will
leak a reference to master. Fix by removing the unnecessary
spi_master_get() call.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-14 17:21:52 +01:00
Lee Jones cf4b5ceb95 spi: st-ssc4: Remove 'no clocking' hack
Due to the newly upstreamed 'critical clocks' API we can now
safely handle clocking in the SPI and I2C drivers without fear
of catastrophically crippling the running platform.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-07-12 13:22:55 +02:00
Bhaktipriya Shridhar 38e099208c spi: spi-sh: Remove deprecated create_singlethread_workqueue
The workqueue has a single workitem(&ss->ws) and hence doesn't require
ordering. Also, it is not being used on a memory reclaim path. Hence, the
singlethreaded workqueue has been replaced with the use of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in spi_sh_remove() to ensure that
there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11 19:32:38 +01:00
Bhaktipriya Shridhar 0d35773979 spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue
The workqueue "wk" serves as a queue for carrying out execution
of requests. It has a single work item(&drv_data->work) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in pch_spi_free_resources() to ensure that
there are no pending tasks while disconnecting the driver.

Also dropped the label 'err_return' since it's not being used anymore.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11 19:32:26 +01:00
Octavian Purdila 7f24467f3b spi / ACPI: add support for ACPI reconfigure notifications
This patch adds supports for SPI device enumeration and removal via
ACPI reconfiguration notifications that are send as a result of an
ACPI table load or unload operation.

The code is very similar with the device tree reconfiguration code
with only small differences in the way we test and set the enumerated
state of the device:

 * the equivalent of device tree's OF_POPULATED flag is the
   flags.visited field in the ACPI device and the following wrappers
   are used to manipulate it: acpi_device_enumerated(),
   acpi_device_set_enumerated() and acpi_device_clear_enumerated()

 * the device tree code checks of status of the OF_POPULATED flag to
   avoid trying to create duplicate Linux devices in two places: once
   when the controller is probed, and once when the reconfigure event
   is received; in the ACPI code the check is performed only once when
   the ACPI namespace is searched because this code path is invoked in
   both of the two mentioned cases

The rest of the enumeration handling is similar with device tree: when
the Linux device is unregistered the ACPI device is marked as not
enumerated; also, when a device remove notification is received we
check that the device is in the enumerated state before continuing
with the removal of the Linux device.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08 21:52:35 +02:00
Franklin S Cooper Jr 0ba1870f88 spi: omap2-mcspi: Use the SPI framework to handle DMA mapping
Currently, the driver handles mapping buffers to be used by the DMA.
However, there are times that the current mapping implementation will
fail for certain buffers. Fortunately, the SPI framework can detect
and map buffers so its usable by the DMA.

Update the driver to utilize the SPI framework for buffer
mapping instead. Also incorporate hooks that the framework uses to
determine if the DMA can or can not be used.

This will result in the original omap2_mcspi_transfer_one function being
deleted and omap2_mcspi_work_one being renamed to
omap2_mcspi_transfer_one. Previously transfer_one was only responsible
for mapping and work_one handled the transfer. But now only transferring
needs to be handled by the driver.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08 10:48:02 +02:00
Franklin S Cooper Jr 2b32e987c4 spi: omap2-mcspi: Select SPI_SPLIT
The function sg_split will be used by spi-omap2-mcspi to handle a SoC
workaround in the SPI driver. Therefore, select SG_SPLIT so this function
is available to the driver.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08 10:47:45 +02:00
Andy Shevchenko ca80ef718b spi: pxa2xx-pci: Support both chipselects on Braswell
The commit 30f3a6ab44 ("spi: pxa2xx: Add support for both chip selects on
Intel Braswell") introduces a support of chipselects for Intel Braswell SPI
host controller. Though it missed to convert the PCI part of the driver.

Do conversion here which enables both chipselects on Intel Braswell when
enumerated via PCI.

We don't care about num_chipselect value since it is overrided inside core
driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07 12:04:47 +02:00
Andy Shevchenko 152bc19e2f spi: pxa2xx: Clear all RFT bits in reset_sccr1() on Intel Quark
It seems the commit e5262d0568 ("spi: spi-pxa2xx: SPI support for Intel Quark
X1000") misses one place to be adapted for Intel Quark, i.e. in reset_sccr1().

Clear all RFT bits when call reset_sccr1() on Intel Quark.

Fixes: e5262d0568 ("spi: spi-pxa2xx: SPI support for Intel Quark X1000")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-07-07 11:47:11 +02:00
Alexander Shiyan 6acaadc852 spi: clps711x: Driver refactor
This is a complex patch for refactoring CLPS711X SPI driver.
This change adds devicetree support and removes board support.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07 11:44:43 +02:00
Andi Shyti d9aaf1dc98 spi: s3c64xx: do not disable the clock while configuring the spi
When the clock is coming from the cmu it is not required to be
disabled and then re-enabled in order to change the rate.

Besides, some exynos chipsets (e.g. exynos5433) do not deliver
any to the SFR if one from the pclk ("spi" in this case) or sclk
("busclk") is disabled.

Remove the clock disabling/enabling to avoid falling into this
situation.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07 11:24:32 +02:00
Franklin S Cooper Jr 4bd00413cd spi: omap2-mcspi: Add comments for RX only DMA buffer workaround
OMAP35x and OMAP37x mentions in the McSPI End-of-Transfer Sequences section
that if the McSPI is configured as a Master and only DMA RX is being
performed then the DMA transfer size needs to be reduced by 1 or 2.

This was originally implemented by:
commit 57c5c28dbc ("spi: omap2_mcspi rxdma bugfix")

This patch adds comments to clarify what is going on in the code since its
not obvious what problem its addressing.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-05 16:48:25 +02:00
Mika Westerberg cf9f4327a3 spi: spidev: Add ACPI probing support
Some IoT and maker software stacks are using spidev to perform raw access
to the SPI bus instead of relying existing drivers provided by the kernel.
They then implement their own "drivers" in userspace on top of the spidev
raw interface. This is far from being an ideal solution but we do not want
to prevent using mainline Linux in these devices.

Now, it turns out that Windows has similar SPI devices than spidev which
allow raw access on the SPI bus to userspace programs as described in the
link below:

  https://msdn.microsoft.com/windows/hardware/drivers/spb/spi-tests-in-mitt

These SPI test devices are also meant to be used during development and
testing.

In order to allow usage of spidev for development and testing in Linux, add
those same ACPI IDs to the spidev driver (which is Linux counterpart of the
Windows SPI test devices), but complain loudly so that users know it is not
good idea to use it in production systems. Instead they should be using
proper drivers for peripherals connected to the SPI bus.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 16:28:52 +02:00
Andy Shevchenko e379d2cd35 spi: pxa2xx-pci: Sort header block alphabetically
Simply sort header block alphabetically.

While here, sort devices by PCI ID and add a copyright line for Intel.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 16:13:42 +02:00
Andy Shevchenko 21ddba19ce spi: pxa2xx-pci: Remove unused code
pcim_iomap_table() can't fail when called after pcim_iomap_regions(). Moreover,
we already dereference returned value and kernel will crash if it is not
correct.

Remove obvious leftover of commit 0202775bc3 ("spi/pxa2xx-pci: switch to use
pcim_* interfaces").

Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 16:13:42 +02:00
Andy Shevchenko 4f4709109e spi: pxa2xx-pci: Enable SPI on Intel Merrifield
The SPI controllers used on Intel Merrifield are PXA2XX compatible. This patch
enables them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 16:13:42 +02:00
Andy Shevchenko 743485ea3b spi: pxa2xx-pci: Do a specific setup in a separate function
Move LPSS specific setup to a separate function. It makes ->probe() cleaner as
well as allows extend the driver for different variation of hardware in the
future, e.g. for Intel Merrifield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 16:13:42 +02:00
Mika Westerberg 704d2b0794 spi: pxa2xx: Add support for Intel Kaby Lake PCH-H
Kaby Lake PCH-H has the same SPI host controller as Skylake. Add these new
PCI IDs to the list of supported devices.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 14:42:17 +02:00
Dan Carpenter 47c169ee67 spi: s3c64xx: indent an if statement
It generates a static checker warning if an if statement isn't indented.
I think the code is fine except for the white space issue.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-04 10:47:58 +02:00
Bhaktipriya Shridhar eac9837f87 spi: spi-bfin-sport: Remove deprecated create_singlethread_workqueue
The workqueue "workqueue" serves as a driver message queue.
It has a single work item(&drv_data->pump_messages) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in bfin_sport_spi_destroy_queue() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-03 14:24:31 +02:00
Bhaktipriya Shridhar ac96b737cd spi: spi-mpc52xx-psc: Remove deprecated create_singlethread_workqueue
The workqueue "workqueue" has a single work item(&mps->work)
doesn't require ordering. Also, it is not being used on a memory reclaim
path. Hence, the singlethreaded workqueue has been replaced with the use
of system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in mpc52xx_psc_spi_of_remove() to ensure that
nothing is pending while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-03 14:23:25 +02:00
Bhaktipriya Shridhar b43afff7dc spi: spi-txx9: Remove deprecated create_singlethread_workqueue
The workqueue "workqueue" has a single work item(&c->work) and hence
doesn't require ordering. Also, it is not being used on a memory reclaim
path. Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in txx9spi_remove() to ensure that
nothing is pending while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-03 14:22:27 +02:00
Bhaktipriya Shridhar 9b96f0704b spi: spi-bfin5xx: Remove deprecated create_singlethread_workqueue
The workqueue "workqueue" serves as a driver message queue.
It has a single work item(&drv_data->pump_messages) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in bfin_spi_destroy_queue() to ensure that there
are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-03 14:14:31 +02:00
Mark Brown 2a9b27b326 Merge remote-tracking branches 'spi/fix/ep93xx', 'spi/fix/rockchip', 'spi/fix/sunxi' and 'spi/fix/ti-qspi' into spi-linus 2016-06-30 13:17:29 +01:00
Andi Shyti 730d9d4d11 spi: s3c64xx: simplify if statement in prepare_transfer function
The whole function is inside an 'if' statement
("!is_polling(sdd)").

Check the opposite of that statement at the beginning and exit,
this way we can have one level less of indentation.

Remove the goto paths as they are redundant.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 22:45:23 +01:00
Andi Shyti 11f66f0927 spi: s3c64xx: do not configure the device twice
At the start of the transfer, the spi_config function is called
twice, the first time when the 3c64xx_spi_prepare_message is
called and the second time with the s3c64xx_spi_transfer_one,
both called from the spi framework.

Remove the first call at the prepare message because in that
point we don't have the imformation about "bit per word" and
frequency.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 22:45:23 +01:00
Andi Shyti a92e7c3d82 spi: s3c64xx: consider the case when the CS line is not connected
When the CS line is not connected, it is not needed to enable or
disable the chip selection functionality from the s3c64xx
devices in order to perform a transfer.
Set the CS controller logically always enabled already during
initialization (by writing '0' in the S3C64XX_SPI_SLAVE_SEL
register) and never disable it.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 22:45:23 +01:00
Andi Shyti aa4964c4eb spi: s3c64xx: group the CS signalling writes in a single function
To enable/disable the CS line, the driver performs a writel in
the S3C64XX_SPI_SLAVE_SEL registers. Group the register's
configuration in a single function.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-29 22:45:15 +01:00
Colin Ian King b7ddfb9f49 spi: loopback-test: fix spelling mistake: "missmatch" -> "mismatch"
trivial fix to spelling mistake in dev_err message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-28 19:40:53 +01:00
Michal Suchanek 0b06d8cf4f spi: sunxi: set maximum and minimum speed of SPI master
The speed limits are unset in the sun4i and sun6i SPI drivers.

The maximum speed of SPI master is used when maximum speed of SPI slave
is not specified. Also the __spi_validate function should check that
transfer speeds do not exceed the master limits.

The user manual for A10 and A31 specifies maximum
speed of the SPI clock as 100MHz and minimum as 3kHz.

Setting the SPI clock to out-of-spec values can lock up the SoC.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
--
v2:
new patch
v3:
fix constant style
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-27 19:18:35 +01:00
Colin Ian King 77cca63acc spi: ti-qspi: spelling mistake: "trasnfers" -> "transfers"
trivial fix to spelling mistake in dev_dbg message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-26 12:29:04 +01:00
Geert Uytterhoeven a6802cc05f spi: sh-msiof: Remove sh_msiof_spi_priv.chipdata
After probe time, the pointer to the sh_msiof_chipdata structure in the
sh_msiof_spi_priv structure is used only for checking the SPI master flags.
As these are also available in the spi_master structure, convert the
users to access those, and remove the pointer.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-22 14:14:38 +01:00
Christian Gmeiner ff1ba3dac0 spi: imx: wait_for_completion_timeout(..) for PIO transfers
In some rare cases I see the following 'task blocked' information. It
looks like the PIO transfer has some problems and never succeeds. Make
use of wait_for_completion_timeout(..) to detect this case and
return -ETIMEDOUT.

[ 240.246067] INFO: task hexdump:1660 blocked for more than 120 seconds.
[ 240.246089] Not tainted 4.1.17 0000001
[ 240.246099] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.246109] hexdump D c0575548 0 1660 1 0x00000000
[ 240.246132] Backtrace:
[ 240.246166] [<c057524c>] (__schedule) from [<c0575a84>] (schedule+0x40/0xa4)
[ 240.246176] r10:00000000 r9:c07f1300 r8:c07b8408 r7:c0576518 r6:7fffffff r5:7fffffff
[ 240.246210] r4:ee972e7c
[ 240.246233] [<c0575a44>] (schedule) from [<c0578544>] (schedule_timeout+0x174/0x274)
[ 240.246254] [<c05783d0>] (schedule_timeout) from [<c0576518>] (wait_for_common+0xc0/0x164)
[ 240.246263] r10:00000000 r9:c07f1300 r8:00000002 r7:00000000 r6:7fffffff r5:ee972e78
[ 240.246294] r4:ee972e7c
[ 240.246314] [<c0576458>] (wait_for_common) from [<c05765dc>] (wait_for_completion+0x20/0x24)
[ 240.246324] r10:ee972e50 r8:00000001 r7:c3976200 r6:ee972c00 r5:ee972e50 r4:c2c87d28
[ 240.246367] [<c05765bc>] (wait_for_completion) from [<c03f6b04>] (spi_imx_transfer+0xe8/0x3cc)
[ 240.246393] [<c03f6a1c>] (spi_imx_transfer) from [<c03f50e4>] (spi_bitbang_transfer_one+0xb4/0x250)
[ 240.246403] r10:ee972e50 r8:00000001 r7:00000000 r6:c2c87da0 r5:00000000 r4:c2c87d28
[ 240.246443] [<c03f5030>] (spi_bitbang_transfer_one) from [<c03f36e8>] (__spi_pump_messages+0x36c/0x6b4)
[ 240.246452] r10:ee9e5010 r9:00000001 r8:ee9e5010 r7:00000000 r6:c2c87da0 r5:c2c87d6c
[ 240.246483] r4:ee972c00
[ 240.246503] [<c03f337c>] (__spi_pump_messages) from [<c03f3b68>] (__spi_sync+0x138/0x1e4)
[ 240.246512] r10:00000000 r9:00000000 r8:c03f25a8 r7:00000000 r6:ee972c00 r5:c3976200
[ 240.246542] r4:c2c87da0
[ 240.246562] [<c03f3a30>] (__spi_sync) from [<c03f3c50>] (spi_sync+0x1c/0x20)
[ 240.246571] r10:00040000 r9:00000000 r8:c3976200 r7:00000000 r6:ee973300 r5:c2c87da0
[ 240.246602] r4:ee973014
[ 240.246623] [<c03f3c34>] (spi_sync) from [<c03f0210>] (m25p80_read+0xf8/0x124)
[ 240.246641] [<c03f0118>] (m25p80_read) from [<c03f1528>] (spi_nor_read+0x64/0x80)
[ 240.246651] r10:00004000 r8:00004000 r7:00000000 r6:00040000 r5:00000000 r4:ee973014
[ 240.246698] [<c03f14c4>] (spi_nor_read) from [<c03cdcb4>] (mtd_read+0x98/0xcc)
[ 240.246708] r7:c2c87ea0 r6:ee973098 r5:00000000 r4:001c0000
[ 240.246740] [<c03cdc1c>] (mtd_read) from [<c03d300c>] (mtdchar_read+0xcc/0x204)
[ 240.246750] r9:ed424000 r8:00000000 r7:b495d018 r6:c2c87f78 r5:00000000 r4:00040000
[ 240.246793] [<c03d2f40>] (mtdchar_read) from [<c013b1c4>] (__vfs_read+0x3c/0xe0)
[ 240.246803] r10:00004000 r9:00000000 r8:c2c87f78 r7:b495d018 r6:c2c87f78 r5:c05c8104
[ 240.246833] r4:c32fe600
[ 240.246852] [<c013b188>] (__vfs_read) from [<c013befc>] (vfs_read+0x98/0x154)
[ 240.246861] r10:00000000 r8:00040000 r7:00004000 r6:c2c87f78 r5:b495d018 r4:c32fe600
[ 240.246899] [<c013be64>] (vfs_read) from [<c013c008>] (SyS_read+0x50/0x90)
[ 240.246908] r10:00000000 r8:00040000 r7:b495d018 r6:00004000 r5:c32fe601 r4:c32fe600
[ 240.246953] [<c013bfb8>] (SyS_read) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c)
[ 240.246962] r9:c2c86000 r8:c000fc04 r7:00000003 r6:00004000 r5:00000000 r4:b495d018

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 19:52:15 +01:00
Jarkko Nikula b6ced294fb spi: pxa2xx: Switch to SPI core DMA mapping functionality
SPI core provides DMA mapping with scatterlists. Start using it instead
of own implementation in spi-pxa2xx. Major difference in addition to
bunch of removed boilerplate code is that SPI core does
mapping/unmapping for all transfers in a message before and after the
message sending where spi-pxa2xx did mapping/unmapping for each
transfers separately.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 18:44:48 +01:00
Jarkko Nikula 2d7537d8f6 spi: pxa2xx: Use local struct spi_master pointer in pump_transfers()
We will find more use for struct spi_master pointer in pump_transfers()
and code will be more readable if we access it using local pointer than
through the drv_data->master.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-21 18:44:48 +01:00
Alexander Shiyan f989bc6958 spi: imx: Remove "maybe_unused" attributes
The SPI-driver no longer contains the conditions for various CPUs, so
"maybe_unused" attributes is no longer needed.
This patch removes these attributes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14 10:19:47 +01:00
Alexander Shiyan c0c7a5d796 spi: imx: Remove unnecessary field "mode" from struct spi_imx_config
SPI mode can be obtained directly from spi-device, there is no
need to keep a copy.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14 10:19:44 +01:00
Alexander Shiyan b36581df7e spi: imx: Using existing properties for chipselects
Patch reuse existing "chip_select" and "cs_gpio(s)" fields from SPI core.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14 10:19:41 +01:00
Michal Suchanek 719bd65420 spi: sunxi: fix transfer timeout
The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over
1MHz SPI bus takes way longer than that. Calculate the timeout from the
actual time the transfer is supposed to take and multiply by 2 for good
measure.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-06-14 10:05:18 +01:00
Michal Suchanek 6d9fe44bd7 spi: sun4i: fix FIFO limit
When testing SPI without DMA I noticed that filling the FIFO on the
spi controller causes timeout.

Always leave room for one byte in the FIFO.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-06-14 10:05:08 +01:00
Michal Suchanek 794912cff6 spi: sunxi: expose maximum transfer size limit
The sun4i spi hardware can trasfer at most 63 bytes of data without DMA
support so report the limitation. Same for sun6i.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-14 10:04:42 +01:00
Wei Yongjun 57c624ae1c spi: orion: Fix return value check in orion_spi_probe()
In case of error, the function devm_ioremap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should
be replaced with NULL test.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-13 16:36:40 +01:00
Tomeu Vizoso 4dc0dd8360 spi: rockchip: Signal unfinished DMA transfers
When using DMA, the transfer_one callback should return 1 because the
transfer hasn't finished yet.

A previous commit changed the function to return 0 when the DMA channels
were correctly prepared.

This manifested in Veyron boards with this message:

[ 1.983605] cros-ec-spi spi0.0: EC failed to respond in time

Fixes: ea98491133 ("spi: rockchip: check return value of dmaengine_prep_slave_sg")
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-06-08 11:56:54 +01:00
Vignesh R f4502dd1da spi: Add DMA support for spi_flash_read()
Few SPI devices provide accelerated read interfaces to read from
SPI-NOR flash devices. These hardwares also support DMA to transfer data
from flash to memory either via mem-to-mem DMA or dedicated slave DMA
channels. Hence, add support for DMA in order to improve throughput and
reduce CPU load.
Use spi_map_buf() to get sg table for the buffer and pass it to SPI
driver.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-08 10:26:46 +01:00
Jean-Jacques Hiblot 3ac066e222 spi: spi-ti-qspi: Suspend the queue before removing the device
Before disabling the pm_runtime, we must ensure that there is no transfer
in progress nor will a new one be started. Otherwise the message pump will
fail and in the end, the process requesting the transfer will be stuck.
This behavior has been observed when transferring data from a SPI flash
with dd while removing the module on a DRA7x-evm.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 18:51:58 +01:00
Caesar Wang aa29ea3df2 spi/rockchip: add the rk3036/rk3228/rk3368 to match for driver
In gerenal, the "rockchip,rockchip-spi" string will match the dts
that's great in spi driver. After all the most of rockchip SoCs ar
same spi controller.

Then, we should keep the old style to match the dts various.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-31 17:05:05 +01:00
Dan O'Donovan c64e1265ae spi: pxa2xx: use DMA by default if supported
Currently, even if the PXA2xx SPI master supports DMA, it won't be
enabled unless (i) the slave device is enumerated through ACPI, or
(ii) the slave device is registered with board-specific
controller_data specified.  Even then, there isn't a field in the
controller_data that explicitly enables dma - it just gets enabled
if the master supports it and controller_data is non-NULL.

This means that drivers which register SPI devices on a bus without
awareness of this controller cannot avail of DMA performance gains.

This patch allows DMA transfers to be used if supported.

Signed-off-by: Dan O'Donovan <dan@emutex.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30 17:09:31 +01:00
Stefan Roese b3c195b3a7 spi: orion: Add direct access mode
This patch adds support for the direct access mode to the Orion SPI
driver which is used on the Marvell Armada based SoCs. In this direct
mode, all data written to (or read from) a specifically mapped MBus
window (linked to one SPI chip-select on one of the SPI controllers)
will be transferred directly to the SPI bus. Without the need to control
the SPI registers in between. This can improve the SPI transfer rate in
such cases.

Both, direct-read and -write mode are supported. But only the write
mode has been tested. This mode especially benefits from the SPI direct
mode, as the data bytes are written head-to-head to the SPI bus,
without any additional addresses.

One use-case for this direct write mode is, programming a FPGA bitstream
image into the FPGA connected to the SPI bus at maximum speed.

This mode is described in chapter "22.5.2 Direct Write to SPI" in the
Marvell Armada XP Functional Spec Datasheet.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-30 17:01:20 +01:00
Linus Torvalds 0723ab4a97 sound updates #2 for 4.7-rc1
This is the second update round for 4.7-rc1.  Most of changes are
 about the pending ASoC updates and fixes, including a few new
 drivers.  Below are some highlights:
 
 ASoC:
 - New drivers for MAX98371 and TAS5720
 - SPI support for TLV320AIC32x4, along with the module split
 - TDM support for STI Uniperf IPs
 - Remaining topology API fixes / updates
 
 HDA:
 - A couple of Dell quirks and new Realtek codec support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJXSLGwAAoJEGwxgFQ9KSmkKz4P/2xpAXcwjT/g/WgeNVsZLnxd
 vs1KlMPSWXLHY7ESZB+oDYtw5pAQWta2gKnG3T0QpkEtyqcyvEAUch55SfPbkDWz
 bRwboK91NF9Cfrso+QnUG1HdpaeDsNydiAR5u2sdemQG+rh8TmWXNmFsuqPptjbm
 LP6Spf8Ia2TYAvagZOB+2UTl7Jq8jMXiYP3aGWMHm7P/kREMQkSWcQ9U8F8UK92G
 5D0qKGvChsd23ybGUL1nBM7wBvErFoKd4Xa1zMudQt8EkTjistdgm24v3PO+lKDv
 JYiEugOZctzqtQVUlQMXcIqrlsafXwJN7ttKGst9gj32bM+a7EW0TGG0KyhxXI5w
 fRgGU7AJwncs9hBzEPBfc6Jms85THN2HpusU61ZYpyFAhLnHAOL7iIZnNKY8Pyyg
 tOPY2lTwHD9ic9EiC33/IypT50n0lBOi7X+YE7lGWdm2jXNvxtFv1jUw99kx25fj
 UaFNQaDYXXDKO1POCFrHpIq+jJ71Jmk7mXktI75wfuLyX3PSPyFg8OBbYVbTWkbL
 xdSqBs6LCESZ1iV9mauxwPSex44BpaMB3E0TA+7iN3+0Uwdfxe0OoLnX6dGiLSZJ
 QenFu/EDdCsA8rlrDy7AS1e5ulpYsTY1KGSZbfNzMdNsmD2XC3FdZHEF5PAC4wZQ
 EnNaik6InJgHlMF/6MXo
 =uNKQ
 -----END PGP SIGNATURE-----

Merge tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull more sound updates from Takashi Iwai:
 "This is the second update round for 4.7-rc1.  Most of changes are
  about the pending ASoC updates and fixes, including a few new drivers.
  Below are some highlights:

  ASoC:
   - New drivers for MAX98371 and TAS5720
   - SPI support for TLV320AIC32x4, along with the module split
   - TDM support for STI Uniperf IPs
   - Remaining topology API fixes / updates

  HDA:
   - A couple of Dell quirks and new Realtek codec support"

* tag 'sound-4.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (63 commits)
  ALSA: hda - Fix headset mic detection problem for one Dell machine
  spi: spi-ep93xx: Fix the PTR_ERR() argument
  ALSA: hda/realtek - Add support for ALC295/ALC3254
  ASoC: kirkwood: fix build failure
  ALSA: hda - Fix headphone noise on Dell XPS 13 9360
  ASoC: ak4642: Enable cache usage to fix crashes on resume
  ASoC: twl6040: Disconnect AUX output pads on digital mute
  ASoC: tlv320aic32x4: Properly implement the positive and negative pins into the mixers
  rcar: src: skip disabled-SRC nodes
  ASoC: max98371 Remove duplicate entry in max98371_reg
  ASoC: twl6040: Select LPPLL during standby
  ASoC: rsnd: don't use prohibited number to PDMACHCRn.SRS
  ASoC: simple-card: Add pm callbacks to platform driver
  ASoC: pxa: Fix module autoload for platform drivers
  ASoC: topology: Fix memory leak in widget creation
  ASoC: Add max98371 codec driver
  ASoC: rsnd: count .probe/.remove for rsnd_mod_call()
  ASoC: topology: Check size mismatch of ABI objects before parsing
  ASoC: topology: Check failure to create a widget
  ASoC: add support for TAS5720 digital amplifier
  ...
2016-05-28 12:23:12 -07:00
Mark Brown bea8205fee Merge branch 'asoc-fix-ep93xx' into spi-fix-ep93xx 2016-05-26 11:13:12 +01:00
Mark Brown a5a3717a98 Merge remote-tracking branches 'asoc/fix/ak4642', 'asoc/fix/ep93xx', 'asoc/fix/kirkwood' and 'asoc/fix/twl6040' into asoc-linus 2016-05-25 19:18:00 +01:00
Linus Torvalds a56f489502 spi: Updates for v4.7
Another quiet release for SPI, almost entirely driver specific changes
 with the diffstat dominated by two new drivers which are about two
 thirds of it in terms of lines of code:
 
  - New drivers for PIC32 standard and SQI controllers.
  - The Cadence driver has had runtime PM support added and quite a few
    fixes and cleanups.
  - The flash-specific accelerated path support now has a feature query
    interface.
  - The pxa2xx driver has been moved to use the core DMA mapping support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJXQufEAAoJECTWi3JdVIfQXeEH/3PZVHvwQBqpN6S0AunlJQoM
 s1bScKYeH2ukx9iw86M/upSCOVt4TGlPrdwzcYCUYll9IJuO/ChDio7PoVlxQeJB
 kYUrFi6dzE/bCNzWtrGtyvNlSDsrRccbRBhmKTFQ9DokcJHgzdzhuCuXUR6OKDDw
 CxlvDrLwapzOpHIncrhh6dvv1NoZgusOTMzVQAPvLbuiH9WpdnD9MjySklIqd0XU
 bp+J4J5+jyBVykOZ2MdYpXf1dRhg0c0kmKXOKuX9woiJhvBFrtZX2GfCw1MXchKZ
 /obHOyD7ff+MBCY2nFN95s3rl9Vxn8IAfNWsuQvZaFK0nz1bypaQ6aXIbXXgj/8=
 =QO1T
 -----END PGP SIGNATURE-----

Merge tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Another quiet release for SPI, almost entirely driver specific changes
  with the diffstat dominated by two new drivers which are about two
  thirds of it in terms of lines of code:

   - new drivers for PIC32 standard and SQI controllers
   - the Cadence driver has had runtime PM support added and quite a few
     fixes and cleanups
   - flash-specific accelerated path support now has a feature query
     interface
   - the pxa2xx driver has been moved to use the core DMA mapping support"

* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
  spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
  spi: dw-pci: Spelling s/paltforms/platforms/g
  spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
  spi: Fix simple typo s/impelment/implement
  spi: rockchip: potential NULL dereference on error
  spi: zynqmp: disable clocks in error paths
  spi: Drop unnecessary dependencies on relaxed I/O accessors
  spi: qup: Add spi_master_put in remove function
  spi: qup: Handle clocks in pm_runtime suspend and resume
  spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
  spi: st-ssc4: Allow compile test build
  spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
  spi: davinci: Use dma_request_chan() for requesting DMA channel
  spi: pic32: Fix checking return value of devm_ioremap_resource
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: Drop duplicate code to set master->dev.parent
  spi: pic32: Set proper bits_per_word_mask
  spi: return error if kmap'd buffers passed to spi_map_buf()
  spi: core: add hook flash_read_supported to spi_master
  spi: pic32-sqi: silence array overflow warning
  ...
2016-05-24 11:12:32 -07:00
Fabio Estevam f7aa23cb8d spi: spi-ep93xx: Fix the PTR_ERR() argument
PTR_ERR should access the value just tested by IS_ERR.

The semantic patch that makes this change is available
in scripts/coccinelle/tests/odd_ptr_err.cocci.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-24 16:54:50 +01:00
Mark Brown c4e85b7e6f Merge remote-tracking branch 'spi/topic/zynqmp' into spi-next 2016-05-23 12:16:58 +01:00
Mark Brown c8d6a77b58 Merge remote-tracking branches 'spi/topic/pxa2xx', 'spi/topic/qup', 'spi/topic/rockchip', 'spi/topic/st-ssc4' and 'spi/topic/xlp' into spi-next 2016-05-23 12:16:55 +01:00
Mark Brown b340941af9 Merge remote-tracking branches 'spi/topic/octeon', 'spi/topic/omap2-mcspi', 'spi/topic/orion', 'spi/topic/pic32' and 'spi/topic/pic32-qspi' into spi-next 2016-05-23 12:16:51 +01:00
Mark Brown c36581c9a5 Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/flash-read', 'spi/topic/fsl-dspi', 'spi/topic/fsl-espi' and 'spi/topic/kconfig' into spi-next 2016-05-23 12:16:48 +01:00
Mark Brown 4b744afa7d Merge remote-tracking branches 'spi/topic/bcm53xx', 'spi/topic/cadence', 'spi/topic/davinci' and 'spi/topic/dln2' into spi-next 2016-05-23 12:16:45 +01:00
Mark Brown 38acceff8f Merge remote-tracking branch 'spi/topic/core' into spi-next 2016-05-23 12:16:45 +01:00
Linus Torvalds a0d3c7c5c0 dmaengine updates for 4.7
This time round the update brings in following changes:
 
  - New tegra driver for ADMA device
  - Support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central
    Direct Memory Access Engine and few updates to this driver.
  - New cyclic capability to sun6i and few updates.
  - Slave-sg support in bcm2835.
  - Updates to many drivers like designware, hsu, mv_xor, pxa, edma,
    qcom_hidma & bam.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPVb9AAoJEHwUBw8lI4NHnDQP/AtUYBTI8XD68iGh5eCTEtwO
 3dNgUmOvIAIl0ZtVKex3b7j2S52IN7EDv44QmsmvMHgjvaupUsZ/HeIHgoI37y39
 /qoRkyiG75ht68BrNjKcpJLsOyxaAUT1tMyf/bYXlDW8O7qEPtRDhuvUB+i+s3RX
 ljNOQXH2WaQTJrNeZxkvbp92iGiu3j7AKyCh9MJ4gnF4y2oA1bFp++QpH5qcBOTp
 0nccs7pgDQhw2nzHmhYbEmvgcKPrPQi+67U7eIed7n7wiThAIXIEbZl6AYk9kFaK
 gSa4/N3fwnZc9TFR5O6qdanvsYdW4JC1P5Ydm0opExo3lgtMckQ3sGKFIwTG8eU4
 YiyQE1uVHRqT82zxPCecTF+I0Y4g68oCJURrHED6kxKGA5a8ojU04aGebXDiNKlp
 FEDceEC5ch7ZPw8CCTola+TYpf9Vni3g7OkrdkPY9cX/aDXDROghTCg9jgPJ2aL/
 oai5axc5gQMEFzHPaEwFp45tgXw7IvIzaqYHmiWE11fsRbGUSB2HAwBXytI9ReC0
 XTMBvc08YvisbIpIR29T0R5cerzdDuK9bXxYHHHOeUFg0t8R8UGaP1UxEQCVmLsT
 AIrHupoccPJ7IAn0h6mShtZ2yzBfj3rU4tEMJR/Oj/VvjW3gKbbZ5XVi92fOurBs
 xjn9uBBZ/Pt9hgprwlmY
 =0Sy7
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time round the update brings in following changes:

   - new tegra driver for ADMA device

   - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI
     Central Direct Memory Access Engine and few updates to this driver

   - new cyclic capability to sun6i and few updates

   - slave-sg support in bcm2835

   - updates to many drivers like designware, hsu, mv_xor, pxa, edma,
     qcom_hidma & bam"

* tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits)
  dmaengine: ioatdma: disable relaxed ordering for ioatdma
  dmaengine: of_dma: approximate an average distribution
  dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module
  dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event
  dmaengine: qcom_hidma: add support for object hierarchy
  dmaengine: qcom_hidma: add debugfs hooks
  dmaengine: qcom_hidma: implement lower level hardware interface
  dmaengine: vdma: Add clock support
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add config structure to differentiate dmas
  MAINTAINERS: Update Tegra DMA maintainers
  dmaengine: tegra-adma: Add support for Tegra210 ADMA
  Documentation: DT: Add binding documentation for NVIDIA ADMA
  dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI CDMA
  dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI DMA
  dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma
  dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC
  ...
2016-05-19 11:47:18 -07:00
Purna Chandra Mandal 21825ff11d spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'.
Even if DMA support is disabled code using DMA mapping APIs compiles fine,
but fails in linking.
-------
drivers/built-in.o: In function `ring_desc_ring_free':
spi-pic32-sqi.c:(.text+0x2cfbe0): undefined reference to `bad_dma_ops'
spi-pic32-sqi.c:(.text+0x2cfbe4): undefined reference to `bad_dma_ops'
drivers/built-in.o: In function `pic32_sqi_probe':
spi-pic32-sqi.c:(.text+0x2cfe48): undefined reference to `bad_dma_ops'
spi-pic32-sqi.c:(.text+0x2cfeb0): undefined reference to `bad_dma_ops'
spi-pic32-sqi.c:(.text+0x2cff38): undefined reference to `bad_dma_ops'
--------
Correct dependency by adding 'depends on HAS_DMA' in Kconfig.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-13 11:54:28 +01:00
Geert Uytterhoeven 3208a1ccb2 spi: dw-pci: Spelling s/paltforms/platforms/g
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-11 18:26:19 +01:00
Mark Brown 9b1f189e6d Merge remote-tracking branches 'spi/fix/fsl-dspi', 'spi/fix/omap2-mcspi', 'spi/fix/pxa2xx' and 'spi/fix/ti-qspi' into spi-linus 2016-05-06 18:20:37 +01:00
Axel Lin 191ec11348 spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
Current code does not use ctldata at all, so remove spi_set_ctldata call.

spi_setup() will set spi->bits_per_word = 8 if it was not set, so remove
!spi->max_speed_hz checking.

The spi core allows absent of spi->max_speed_hz setting, if it was not set
spi_setup() assigns spi->master->max_speed_hz to it.

spi core allows spi->max_speed_hz > spi->master->max_speed_hz, in this case
spi core will limit the transfer speed to ensure xfer->speed_hz won't
greater than spi->master->max_speed_hz so remove checking if
spi->max_speed_hz is higher than spi->master->max_speed_hz.

As a result, both pic32_sqi_setup() and pic32_sqi_cleanup() can be removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-06 18:18:27 +01:00
Moritz Fischer 8ba811a7d2 spi: Fix simple typo s/impelment/implement
This fixes a simple typo in one of the comments.

Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04 14:42:23 +01:00
Dan Carpenter 5de7ed0c98 spi: rockchip: potential NULL dereference on error
We were calling dma_release_channel(rs->dma_tx.ch) when "rs->dma_tx.ch"
is potentially NULL.  There is actually a call to that in the unwind
code at the bottom of the function so we can just re-arrange this a bit
and remove the call.  Also there is no need to set rs->dma_tx.ch to
NULL on this error path.

Fixes: e4c0e06f94 ('spi: rockchip: fix probe deferral handling')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04 14:41:56 +01:00
Shubhrajyoti Datta ba412e343d spi: zynqmp: disable clocks in error paths
The if pclk enable fails the refclk is not disabled.
Fix the same.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-04 14:21:03 +01:00
Axel Lin 46cb41534a spi: Drop unnecessary dependencies on relaxed I/O accessors
The relaxed I/O accessors are available on all architectures now.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02 16:25:13 +01:00
Pramod Gurav d2442287e7 spi: qup: Add spi_master_put in remove function
Release memory allocated for spi master by calling spi_master_put in
.remove function.

Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02 15:27:28 +01:00
Pramod Gurav dae1a7700b spi: qup: Handle clocks in pm_runtime suspend and resume
Clocks must ne disabled in pm_runtime to achieve some power saving.
Enable the clocks when the device is runtime resumed during a transfer.

Signed-off-by: Pramod Gurav <pramod.gurav@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-02 15:27:28 +01:00
Axel Lin 1051550e9d spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29 18:16:25 +01:00
Axel Lin 83fefd2d5b spi: st-ssc4: Allow compile test build
There is no build dependency for this driver, so enable COMPILE_TEST to get
better build coverage.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29 18:16:25 +01:00
Peter Ujfalusi b085c6129a spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
With the new dma_request_chan() the client driver does not need to look for
the DMA resource and it does not need to pass filter_fn anymore.
By switching to the new API the driver can now support deferred probing
against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29 18:15:48 +01:00
Peter Ujfalusi fe5fd25409 spi: davinci: Use dma_request_chan() for requesting DMA channel
With the new dma_request_chan() the client driver does not need to look for
the DMA resource and it does not need to pass filter_fn anymore.
By switching to the new API the driver can now support deferred probing
against DMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29 18:15:15 +01:00
Axel Lin 866e48b099 spi: pic32: Fix checking return value of devm_ioremap_resource
devm_ioremap_resource() returns ERR_PTR on error.
Also remove the redundant dev_err message, the implementation of
devm_ioremap_resource() already print error messages on error paths.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-29 12:34:20 +01:00
Axel Lin 71c5e53b42 spi: Drop duplicate code to set master->dev.parent
It's done by spi_alloc_master().

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26 11:56:09 +01:00
Axel Lin 2452ee2525 spi: pic32: Set proper bits_per_word_mask
This driver only supports 8/16/32 bits_per_word, so set
master->bits_per_word_mask accordingly. With this change, we can remove
the spi->bits_per_word checking in pic32_spi_setup as it's done by spi
core.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-26 11:14:35 +01:00
Jarkko Nikula 66ec246eb9 spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT
Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI
capabilities register even they have one per port. Detection in
pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL
from spi_register_master() where chip select count is validated.

Fix this by not using SPI capabilities register on Sunrisepoint. They don't
have more than one chip select so use the default value 1 instead of
detection.

Fixes: 8b136baa58 ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals")
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-04-26 11:14:00 +01:00
Vignesh R 0569a88f3d spi: return error if kmap'd buffers passed to spi_map_buf()
Current spi_map_buf() implementation supports creates sg_table for
vmalloc'd and kmalloc'd buffers. Therefore return error if kmap'd buffer
(or any other buffer) is passed to spi_map_buf().

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-25 18:55:57 +01:00
Dan Carpenter 989ffc7bd6 spi: pic32-sqi: silence array overflow warning
We read one element beyond the end of the array when we access
"rdesc[i + 1]" so it causes a static checker warning.  It's harmless
because we write over it again on the next line.  But let's just silence
the warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22 16:25:41 +01:00
Thomas Petazzoni 710a1d5445 spi: spi-orion: enable the driver on ARCH_MVEBU platforms
The SPI controller managed by the spi-orion is used on the new ARM64
Marvell Armada 7K/8K SoCs. In order to allow this driver to be built
for this platform, we allow it to be selected for ARCH_MVEBU=y
configurations.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-22 16:07:36 +01:00
Stephen Boyd 280af2b8eb spi: spi-pxa2xx: Remove CLK_IS_ROOT
This flag is a no-op now (see commit 47b0eeb3dc "clk: Deprecate
CLK_IS_ROOT", 2016-02-02) so remove it.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-20 10:14:20 +01:00
Purna Chandra Mandal 3270ac230f spi: pic32-sqi: add SPI driver for PIC32 SQI controller.
This driver implements SPI master interface for Quad SPI
controller, specifically for accessing quad SPI flash.
It uses descriptor-based DMA transfer mode and supports
half-duplex communication for single, dual and quad SPI
transactions.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18 17:52:46 +01:00
Rafał Miłecki a7b221d8f0 spi: bcm53xx: add spi_flash_read callback for MMIO-based reads
This implements more efficient reads of SPI-attached flash content.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18 13:53:46 +01:00
Arnd Bergmann 148b1eb93c spi: cadence: mark pm functions __maybe_unused
The newly added runtime PM support for the cadence spi driver
causes harmless warnings when PM is disabled:

drivers/spi/spi-cadence.c:681:12: warning: 'cnds_runtime_suspend' defined but not used
drivers/spi/spi-cadence.c:652:12: warning: 'cnds_runtime_resume' defined but not used

This adds __maybe_unused annotations to the respective functions
to shut up the warnings, while leaving the code in place for
compile testing and avoiding ugly #ifdefs.

Fixes: d36ccd9f7e ("spi: cadence: Runtime pm adaptation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-18 10:58:49 +01:00
Crestez Dan Leonard 83835fb078 spi: dln2: Pass of_node to spi master
This allows defining SPI devices connected to a DLN2 using devicetree.

This already works for i2c because of a similar patch:
3b10db23: i2c: dln2: set the device tree node of the adapter

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Acked-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-15 18:02:58 +01:00
Andy Shevchenko c422025c18 dmaengine: dw: rename masters to reflect actual topology
The source and destination masters are reflecting buses or their layers to
where the different devices can be connected. The patch changes the master
names to reflect which one is related to which independently on the transfer
direction.

The outcome of the change is that the memory data width is now always limited
by a data width of the master which is dedicated to communicate to memory.

The patch will not break anything since all current users have the same data
width for all masters. Though it would be nice to revisit avr32 platforms to
check what is the actual hardware topology in use there. It seems that it has
one bus and two masters on it as stated by Table 8-2, that's why everything
works independently on the master in use. The purpose of the sequential patch
is to fix the driver for configuration of more than one bus.

The change is done in the assumption that src_master and dst_master are
reflecting a connection to the memory and peripheral correspondently on avr32
and otherwise on the rest.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13 21:36:09 +05:30
Ben Hutchings 1ff7760ff6 spi: spi-ti-qspi: Handle truncated frames properly
We clamp frame_len_words to a maximum of 4096, but do not actually
limit the number of words written or read through the DATA registers
or the length added to spi_message::actual_length.  This results in
silent data corruption for commands longer than this maximum.

Recalculate the length of each transfer, taking frame_len_words into
account.  Use this length in qspi_{read,write}_msg(), and to increment
spi_message::actual_length.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-04-13 08:12:41 +01:00
Ben Hutchings ea1b60fb08 spi: spi-ti-qspi: Fix FLEN and WLEN settings if bits_per_word is overridden
Each transfer can specify 8, 16 or 32 bits per word independently of
the default for the device being addressed.  However, currently we
calculate the number of words in the frame assuming that the word size
is the device default.

If multiple transfers in the same message have differing
bits_per_word, we bitwise-or the different values in the WLEN register
field.

Fix both of these.  Also rename 'frame_length' to 'frame_len_words' to
make clear that it's not a byte count like spi_message::frame_length.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2016-04-13 08:11:17 +01:00
Linus Walleij d7e2ee2570 spi: let SPI masters ignore their children for PM
Let all SPI masters ignore their children: when it comes
to power management: SPI children have no business doing
keeping their parents awake: they are completely autonomous
devices that just use their parent to talk, and the latter
usecase must be power managed by the host itself on a
per-message basis.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-12 04:48:31 +01:00
Akinobu Mita 8070954d7c spi: omap2-mcspi: Undo broken fix for dma transfer of vmalloced buffer
This reverts commit 3525e0aac9.

The DMA transfer for RX buffer was not handled correctly in this change.

The actual transfer length for DMA RX can be less than xfer->len in the
specific condition and the last words will be filled after the DMA
completion, but the commit doesn't consider it and the dmaengine is
started with rx_sg mapped by spi core.

The solution for this at least requires more lines than this commit
has inserted.  So revert it for now.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-12 02:21:14 +01:00
Shubhrajyoti Datta 57bb1369de spi: cadence: Fix some checkpatch warnings
No functional change.
Fixing some style related issues

CHECK: multiple assignments should be avoided
+	new_ctrl_reg = ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR);

CHECK: Alignment should match open parenthesis
+static void cdns_spi_config_clock_freq(struct spi_device *spi,
+				  struct spi_transfer *transfer)

CHECK: Please use a blank line after function/struct/union/enum declarations
+}
+static int cdns_prepare_message(struct spi_master *master,

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-06 10:16:46 -07:00
Andrey Vostrikov 92dc20d83a spi: spi-fsl-dspi: Fix cs_change handling in message transfer
There are use cases when chip select should be triggered between transfers
in single SPI message. Current implementation does this only on last
transfer in message ignoring cs_change value provided in current transfer.

Signed-off-by: Andrey Vostrikov <andrey.vostrikov@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 12:12:42 -07:00
Shubhrajyoti Datta 6fe9b67dbe spi: cadence: Return the error code for cdns_spi_suspend and cdns_spi_resume
Return the error code for cdns_spi_suspend and cdns_spi_resume.
Also fixes a comment where which claims that the error code is
returned.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta 2198b7483d spi: cadence: Remove the clock enable and disable from suspend and resume
Now that the clocks are enabled and disabled per transaction
, remove the clock enable and disable from resume and suspend
hooks.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta d36ccd9f7e spi: cadence: Runtime pm adaptation
Currently the clocks are enabled at probe and disabled
at remove. This patch moves the clock enable to the
start of transaction and disables at the end.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta b4037360e6 spi: cadance: Fix the Documentation
cdns_spi_chipselect has parameter is_high however the comment
describes it as is_on.
Also fixes the below warning.
drivers/spi/spi-cadence.c:182: warning: No description found for
parameter 'is_high'
drivers/spi/spi-cadence.c:182: warning: Excess function parameter 'is_on'
description in 'cdns_spi_chipselect'

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta 50ac697baf spi: cadence: Fix probe error handling
The clock disabling is missed out in some
error cases at probe. Fix the same.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta 24746675fb spi: cadence: Remove _MASK and _OFFSET suffix
Remove the _MASK and _OFFSET from the macros.
It improves readability, removes some checkpatch
error for exceeding 80 chars  and also prevents some
linebreaks.

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Shubhrajyoti Datta 15a1c5030a spi: cadence: Fix a check patch warning
CHECK: Comparison to NULL could be written "!master"
+	if (master == NULL)

Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-05 11:51:10 -07:00
Mark Brown cb39f732ab Merge remote-tracking branches 'spi/fix/omap2' and 'spi/fix/rockchip' into spi-linus 2016-04-04 10:05:49 -07:00
Mark Brown 2b657a586a Merge remote-tracking branch 'spi/fix/imx' into spi-linus 2016-04-04 10:05:47 -07:00
Mark Brown d7124d69a5 Merge remote-tracking branch 'spi/fix/core' into spi-linus 2016-04-04 10:05:45 -07:00
Purna Chandra Mandal 1bcb9f8ceb spi: spi-pic32: Add PIC32 SPI master driver
The PIC32 SPI driver is capable of performing SPI transfers
using PIO or external DMA engine. GPIO controlled /CS support
is made default in the driver for correct operation of the
controller. This can be enabled by adding "cs-gpios" property
of the SPI node in board dts file.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-04-04 10:04:29 -07:00
Shawn Lin e4c0e06f94 spi: rockchip: fix probe deferral handling
Use dma_request_chan instead of dma_request_slave_channel,
in this case we can check EPROBE_DEFER without static
warning.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-31 12:06:19 -07:00
Christophe Ricard a52db659c7 spi: pxa2xx: Fix cs_change management
Fix cs_change management so that it is in line with other spi drivers.

In the spi core api helpers such as spi_bus_lock/unlock and spi_sync_locked
or cs_change field in spi_transfer help to manage chip select from the
device driver.

The driver was setting the chip select to idle if the message queue was
empty despite cs_change or other status field set by spi_bus_lock/unlock
or spi_sync_locked.

Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 19:42:14 +01:00
Nobuteru Hayashi 6319a68011 spi/fsl-espi: avoid infinite loops on fsl_espi_cpu_irq()
It brought nearly infinite loops, and was possible to be
occurred only if the SPI transaction total size are not
alighed with 4. Loops are here at while (tmp--),
tmp is unsigned, and set it with minus value.

The loops are executed as a result of unexpected RX interrupt
occurrence after that. This interrupt may be hardware eratta
and is not fixed.

Fix mspi->len from minus value to 0 and print warning message.

Signed-off-by: Nobuteru Hayashi <hayashi.nbb@ncos.nec.co.jp>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-28 19:41:18 +01:00