Commit Graph

1190 Commits

Author SHA1 Message Date
Rasmus Villemoes 9093464330 leds: trigger: netdev: use memcpy in device_name_store
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example

# cat device_name

# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32

I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.

This is also preparation for future patches.

Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-30 19:09:32 +01:00
Kangjie Lu 0aab8e4df4 leds: pca9532: fix a potential NULL pointer dereference
In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.

Fixes: fa4191a609 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-30 18:50:00 +01:00
Rafał Miłecki 4cb6560514 leds: trigger: netdev: fix refcnt leak on interface rename
Renaming a netdev-trigger-tracked interface was resulting in an
unbalanced dev_hold().

Example:
> iw phy phy0 interface add foo type __ap
> echo netdev > trigger
> echo foo > device_name
> ip link set foo name bar
> iw dev bar del
[  237.355366] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  247.435362] unregister_netdevice: waiting for bar to become free. Usage count = 1
[  257.545366] unregister_netdevice: waiting for bar to become free. Usage count = 1

Above problem was caused by trigger checking a dev->name which obviously
changes after renaming an interface. It meant missing all further events
including the NETDEV_UNREGISTER which is required for calling dev_put().

This change fixes that by:
1) Comparing device struct *address* for notification-filtering purposes
2) Dropping unneeded NETDEV_CHANGENAME code (no behavior change)

Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-26 20:25:37 +01:00
Linus Torvalds dbbdf54c72 platform-drivers-x86 for v5.1-1
Use MODULE_DEVICE_TABLE across several wmi drivers, keeping
 wmi_device_id and MODULE_ALIAS() declarations in sync. Add several
 Ideapad models to the no_hw_rfkill list. Add support for new Mellanox
 platforms, including new fan and LED functionality. Address Dell
 keyboard backlight change event and power button release issues. Update
 dell_rbu to use appropriate memory allocation mechanisms. Several small
 fixes and Ice Lake support for intel_pmc_core. Fix a suspend regression
 for Cherry Trail based devices in intel_int0002_vgpio. A few other
 routine fixes.
 
 The following is an automated git shortlog grouped by driver:
 
 ACPI / scan:
  -  Create platform device for BSG2150 ACPI nodes
 
 Documentation/ABI:
  -  Add new attribute for mlxreg-io sysfs interfaces
  -  Correct mlxreg-io KernelVersion for 5.0
 
 MAINTAINERS:
  -  Include mlxreg.h in Mellanox Platform Driver files
 
 asus-wmi:
  -  Allow loading on systems without the Asus Management GUID
 
 dell-smbios-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  -  Ignore new keyboard backlight change event
 
 dell-wmi-descriptor:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 dell_rbu:
  -  fix lock imbalance in img_update_realloc
  -  stop abusing the DMA API
 
 huawei-wmi:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 ideapad-laptop:
  -  Add ideapad 330-15ICH to no_hw_rfkill
  -  Add S130-14IGM to no_hw_rfkill list
  -  Add Ideapad 530S-14ARR to no_hw_rfkill list
  -  Add Yoga C930 to no_hw_rfkill_list
  -  Add Y530-I5ICH-1060 to no_hw_rfkill list
  -  Fix no_hw_rfkill_list for Lenovo RESCUER R720-15IKBN
 
 intel-hid:
  -  Missing power button release on some Dell models
 
 intel-wmi-thunderbolt:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 intel_int0002_vgpio:
  -  Only implement irq_set_wake on Bay Trail
 
 intel_pmc_core:
  -  Quirk to ignore XTAL shutdown
  -  Add Package cstates residency info
  -  Add ICL platform support
  -  Convert to INTEL_CPU_FAM6 macro
  -  Avoid a u32 overflow
  -  Include Reserved IP for LTR
  -  Fix file permissions for ltr_show
  -  Fix PCH IP name
  -  Fix PCH IP sts reading
  -  Handle CFL regmap properly
 
 leds:
  -  mlxreg: Add support for capability register
 
 mlx-platform:
  -  Fix access mode for fan_dir attribute
  -  Add UID LED for the next generation systems
  -  Add extra CPLD for next generation systems
  -  Add support for new VMOD0007 board name
  -  Add support for fan capability registers
  -  Add support for fan direction register
 
 modpost:
  -  file2alias: define size of alias
 
 platform/mellanox:
  -  mlxreg-hotplug: Fix KASAN warning
 
 platform_data/mlxreg:
  -  Add capability field to core platform data
  -  Document fixes for core platform data
 
 touchscreen_dmi:
  -  Add info for the CHUWI Hi10 Air tablet
  -  Add info for the Chuwi Hi8 Air tablet
  -  Add info for the PoV Wintab P1006w (v1.0) tablet
 
 wmi:
  -  add WMI support to MODULE_DEVICE_TABLE()
  -  move struct wmi_device_id to mod_devicetable.h
  -  fix potential null pointer dereference
 
 wmi-bmof:
  -  use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
 
 x86/CPU:
  -  Add Icelake model number
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE9M1dh6j+oEL41EZIXFIlAfdBhuEFAlyCu1EACgkQXFIlAfdB
 huFASAf/d0Y6uqhLD3G7cL2kXjOWoTE9ouWUwv19bBpnohGmD3OMMap4y1lb6nRR
 thCJRhpmX4ObS2adAC4otiOxTzmVoYGsuS9kfBwhKIby2VYHCCxxaTUs6bzMdOfV
 GsbaMA+vfb29bU4DcWlRtYZIz2FC5oyjW4ZmcMA6KtuBGjG9K1fG5zANQe4H8I0e
 zCdcrXhpDGIBJgaJR2N42EUCJruPoEXYfHa1G4B/QKvuW0CXHAdSE0YrN4ju+S3e
 Ew9ZXhoxRaqlu+ZB7H5Kyy6Mg3ZGMzbeYyQFLk5f2yiKSTFNiqwTEJl1aE2JSpy3
 g8Im+6E44/4G8QOL40g5XwmrxHw5mA==
 =Bx4o
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:

 - use MODULE_DEVICE_TABLE across several wmi drivers, keeping
   wmi_device_id and MODULE_ALIAS() declarations in sync

 - add several Ideapad models to the no_hw_rfkill list

 - add support for new Mellanox platforms, including new fan and LED
   functionality

 - address Dell keyboard backlight change event and power button release
   issues

 - update dell_rbu to use appropriate memory allocation mechanisms

 - several small fixes and Ice Lake support for intel_pmc_core

 - fix a suspend regression for Cherry Trail based devices in
   intel_int0002_vgpio

 - a few other routine fixes

* tag 'platform-drivers-x86-v5.1-1' of git://git.infradead.org/linux-platform-drivers-x86: (50 commits)
  MAINTAINERS: Include mlxreg.h in Mellanox Platform Driver files
  platform/x86: ideapad-laptop: Add S130-14IGM to no_hw_rfkill list
  platform/x86: mlx-platform: Fix access mode for fan_dir attribute
  platform/x86: mlx-platform: Add UID LED for the next generation systems
  platform/x86: mlx-platform: Add extra CPLD for next generation systems
  platform/x86: wmi-bmof: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: intel-wmi-thunderbolt: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: huawei-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-wmi-descriptor: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: dell-smbios-wmi: use MODULE_DEVICE_TABLE() instead of MODULE_ALIAS()
  platform/x86: wmi: add WMI support to MODULE_DEVICE_TABLE()
  platform/x86: wmi: move struct wmi_device_id to mod_devicetable.h
  modpost: file2alias: define size of alias
  platform/x86: touchscreen_dmi: Add info for the CHUWI Hi10 Air tablet
  platform/x86: ideapad-laptop: Add Ideapad 530S-14ARR to no_hw_rfkill list
  platform/x86: ideapad-laptop: Add Yoga C930 to no_hw_rfkill_list
  platform/x86: intel_pmc_core: Quirk to ignore XTAL shutdown
  platform/x86: intel_pmc_core: Add Package cstates residency info
  platform/x86: intel_pmc_core: Add ICL platform support
  ...
2019-03-10 13:16:37 -07:00
Linus Torvalds cd2a3bf026 LED updates for 5.1-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXH2D9wAKCRBiEGxRG/Sl
 2xRxAQDl+fx3qSZvyKFEdeklwz0EdBZyAGP9Jd9aU5AaVnJz5QD9EIh77Ii/HC1t
 Cm6TeM3kfF7JYcqfPlONJqhF4Bgb/A4=
 =y0aX
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:

 - finalize previously announced support for initialization of pattern
   triggers from Device Tree

 - fix for null deref on firmware load failure in leds-lp55xx-common.c

* tag 'leds-for-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: fix null deref on firmware load failure
  leds: trigger: timer: Add initialization from Device Tree
  leds: trigger: oneshot: Add initialization from Device Tree
  leds: trigger: pattern: Add pattern initialization from Device Tree
  leds: Add helper for getting default pattern from Device Tree
  dt-bindings: leds: Add pattern initialization from Device Tree
2019-03-04 19:33:04 -08:00
Vadim Pasternak 530451d0df leds: mlxreg: Add support for capability register
Add support for capability register in order to distinct between the
systems with minor LED configuration differences. It reduces the amount
of code describing systems' LED configuration.
For example one system can be equipped with six LED, while the other
with only four. Reading this information from the capability registers
allows to use the same LED structure for such systems and set the
relevant configuration dynamically based on capability register
content.

Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2019-02-23 09:20:46 -08:00
Michal Kazior 5ddb0869bf leds: lp55xx: fix null deref on firmware load failure
I've stumbled upon a kernel crash and the logs
pointed me towards the lp5562 driver:

> <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2
> <4>[306013.894990] lp5562 0-0030: Falling back to user helper
> ...
> <3>[306073.924886] lp5562 0-0030: firmware request failed
> <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000
> <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58
> <4>[306074.255539] LR is at release_firmware+0x6c/0x138
> ...

After taking a look I noticed firmware_release()
could be called with either NULL or a dangling
pointer.

Fixes: 10c06d178d ("leds-lp55xx: support firmware interface")
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-02-14 22:03:44 +01:00
Kangjie Lu 248b57015f leds: lp5523: fix a missing check of return value of lp55xx_read
When lp55xx_read() fails, "status" is an uninitialized variable and thus
may contain random value; using it leads to undefined behaviors.

The fix inserts a check for the return value of lp55xx_read: if it
fails, returns with its error code.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-17 22:27:39 +01:00
Krzysztof Kozlowski 0f85e8498a leds: trigger: timer: Add initialization from Device Tree
Allow initialization of delays used in timer trigger from Device
Tree property.

This is especially useful for embedded systems where the trigger might
be used early, before bringing up user-space.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16 22:09:25 +01:00
Krzysztof Kozlowski 9c9ab51e86 leds: trigger: oneshot: Add initialization from Device Tree
Allow initialization of delays used in oneshot trigger from Device
Tree property.

This is especially useful for embedded systems where the trigger might
be used early, before bringing up user-space.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16 22:09:18 +01:00
Krzysztof Kozlowski aa6fd10481 leds: trigger: pattern: Add pattern initialization from Device Tree
Allow initialization of pattern used in pattern trigger from Device Tree
property.

This is especially useful for embedded systems where the pattern trigger
would be used to indicate the process of boot status in a nice,
user-friendly blinking way.  This initialization pattern will be used
till user-space is brought up and sets its own pattern, indicating the
boot status is for example finished.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16 22:08:47 +01:00
Krzysztof Kozlowski 8e1f456129 leds: Add helper for getting default pattern from Device Tree
Multiple LED triggers might need to access default pattern so add a
helper for that.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-01-16 22:08:07 +01:00
Linus Torvalds 4e4390ad06 LEDs for 4.21-rc1
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXB0GiQAKCRBiEGxRG/Sl
 2+u5AP0ZgpiZuCMlnqaZ8tTBad4+87qOCHjVcau+npbky8/+7wEA4+c4M0n1vmMy
 HRkgNn5d0N+iDYwyQ4T/4g1IN/eoIQk=
 =n/42
 -----END PGP SIGNATURE-----

Merge tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "There are several few-liners, where most of them are fixes and
  improvments. One thing standing out is ground preparation for
  inititializing trigger parameters via Device Tree.

  We introduce LED_INIT_DEFAULT_TRIGGER flag for that purpose and set it
  when default trigger is matched. It indicates that trigger should
  parse DT properties to retrieve the initialization data when set as
  default one"

* tag 'leds-for-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class
  led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag
  led: triggers: Break the for loop after default trigger is found
  leds: pwm: Use OF variant of LED registering function
  leds: pwm: Simplify with resource-managed devm_led_classdev_register()
  leds: gpio: Drop unneeded manual of_node assignment
  leds: 88pm860x: Use of_node_name_eq for node name comparisons
  leds: powernv: add of_node_put()
2018-12-25 14:52:50 -08:00
Krzysztof Kozlowski 8146aace60 led: triggers: Initialize LED_INIT_DEFAULT_TRIGGER if trigger is brought after class
Trigger driver can be initialized after the LED class device driver.  In
such case led_trigger_set_default() won't be called and flag
LED_INIT_DEFAULT_TRIGGER should be set from led_trigger_register().

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-10 21:31:55 +01:00
Jacek Anaszewski 02d31765bb led: triggers: Add LED_INIT_DEFAULT_TRIGGER flag
Add the flag LED_INIT_DEFAULT_TRIGGER for indicating that trigger
being set is a default trigger for the LED class device, and
thus it should be initialized with settings provided in the fwnode.

Set the flag in the led_trigger_set_default(). It is expected to be
cleared in the activate() op of a trigger after trigger fwnode
initialization data is parsed and applied. This should happen only
once after LED class device registration, to allow leaving triggers
in the idle state on re-apply and let the users apply their own
settings without interference from the default ones.

Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-10 21:31:55 +01:00
Jacek Anaszewski c4f7bd4a42 led: triggers: Break the for loop after default trigger is found
It is of no avail to continue iterating through registered
triggers in the led_trigger_set_default() after the trigger to set
has been found. Add "break" statement to fix this omission.

Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2018-12-10 21:10:42 +01:00
Krzysztof Kozlowski cb14e6d6d8 leds: pwm: Use OF variant of LED registering function
The PWM leds can be instantiated from Device Tree so pass the
respective device node to LED core.  This provides the LED system with
proper device node and exposes it through uevent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08 18:59:47 +01:00
Krzysztof Kozlowski e5a0436dd0 leds: pwm: Simplify with resource-managed devm_led_classdev_register()
Simplify the exit path with resource-managed version of registering LED
class device.  The code should be functionally the same, except that on
device removal the led_pwm_priv->num_leds is not decremented to zero
(which should not have any effect as device is going away).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08 18:59:35 +01:00
Krzysztof Kozlowski b086592e5d leds: gpio: Drop unneeded manual of_node assignment
This reverts the main change of commit bff23714bc ("leds: leds-gpio:
Set of_node for created LED devices") because of_node assignment is
handled by core since commit 7ea79ae86c ("leds: gpio: use OF variant
of LED registering function").  Basically the code was overwriting the
of_node with same value.

No functional change expected.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-08 18:17:14 +01:00
Rob Herring 555fc5ba57 leds: 88pm860x: Use of_node_name_eq for node name comparisons
Convert string compares of DT node names to use of_node_name_eq helper
instead. This removes direct access to the node name pointer.

For instances using of_node_cmp, this has the side effect of now using
case sensitive comparisons. This should not matter for any FDT based
system which this is.

Cc: linux-leds@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-12-06 21:30:08 +01:00
Takashi Iwai faa2541f5b leds: trigger: Introduce audio mute LED trigger
This patch adds a new LED trigger for coupling the audio mixer change
with the LED on laptops or other devices.  Currently there are two
trigger types, "audio-mute" and "audio-micmute".

The audio driver triggers the LED brightness change via
ledtrig_audio_set() call with the proper type (either mute or
mic-mute).  OTOH, the consumers may call ledtrig_audio_get() for the
initial brightness value that may have been set by the audio driver
beforehand.

This new stuff will be used by HD-audio codec driver and some platform
drivers (thinkpad_acpi and dell-laptop, also upcoming huawei-wmi).

Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-11-28 12:28:30 +01:00
Yangtao Li e41ca3b1ea leds: powernv: add of_node_put()
of_find_node_by_path() acquires a reference to the node returned by
it and that reference needs to be dropped by its caller.
powernv_led_probe() doesn't do that, so fix it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-21 20:23:14 +01:00
Linus Torvalds 6a1ac56c23 LED fixes for 4.20-rc2
-----BEGIN PGP SIGNATURE-----
 
 iJEEABYIADkWIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCW+SJrBscamFjZWsuYW5h
 c3pld3NraUBnbWFpbC5jb20ACgkQYhBsURv0pdtTfAEAg9TNQi+IAth1TuEfbsrO
 ykB2PDEPD0wZnWh/sEIYhdAA/3zhYeqPq4X9PLhtRZQ2fJFE2Uw/4BTmSAqffD+L
 2ZwG
 =MA3z
 -----END PGP SIGNATURE-----

Merge tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fixes from Jacek Anaszewski:
 "All three fixes are related to the newly added pattern trigger:

   - remove mutex_lock() from timer callback, which would trigger
     problems related to sleeping in atomic context, the removal is
     harmless since mutex protection turned out to be redundant in this
     case

   - fix pattern parsing to properly handle intervals with brightness == 0

   - fix typos in the ABI documentation"

* tag 'led-fixes-for-4.20-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  Documentation: ABI: led-trigger-pattern: Fix typos
  leds: trigger: Fix sleeping function called from invalid context
  Fix pattern handling optimalization
2018-11-08 17:49:04 -06:00
Baolin Wang 3a40cfe8ba leds: trigger: Fix sleeping function called from invalid context
We will meet below issue due to mutex_lock() is called in interrupt context.
The mutex lock is used to protect the pattern trigger data, but before changing
new pattern trigger data (pattern values or repeat value) by users, we always
cancel the timer firstly to clear previous patterns' performance. That means
there is no race in pattern_trig_timer_function(), so we can drop the mutex
lock in pattern_trig_timer_function() to avoid this issue.

Moreover we can move the timer cancelling into mutex protection, since there
is no deadlock risk if we remove the mutex lock in pattern_trig_timer_function().

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:254
in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted
4.20.0-rc1-koelsch-00841-ga338c8181013c1a9 #171
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
[<c020f19c>] (unwind_backtrace) from [<c020aecc>] (show_stack+0x10/0x14)
[<c020aecc>] (show_stack) from [<c07affb8>] (dump_stack+0x7c/0x9c)
[<c07affb8>] (dump_stack) from [<c02417d4>] (___might_sleep+0xf4/0x158)
[<c02417d4>] (___might_sleep) from [<c07c92c4>] (mutex_lock+0x18/0x60)
[<c07c92c4>] (mutex_lock) from [<c067b28c>] (pattern_trig_timer_function+0x1c/0x11c)
[<c067b28c>] (pattern_trig_timer_function) from [<c027f6fc>] (call_timer_fn+0x1c/0x90)
[<c027f6fc>] (call_timer_fn) from [<c027f944>] (expire_timers+0x94/0xa4)
[<c027f944>] (expire_timers) from [<c027fc98>] (run_timer_softirq+0x108/0x15c)
[<c027fc98>] (run_timer_softirq) from [<c02021cc>] (__do_softirq+0x1d4/0x258)
[<c02021cc>] (__do_softirq) from [<c0224d24>] (irq_exit+0x64/0xc4)
[<c0224d24>] (irq_exit) from [<c0268dd0>] (__handle_domain_irq+0x80/0xb4)
[<c0268dd0>] (__handle_domain_irq) from [<c045e1b0>] (gic_handle_irq+0x58/0x90)
[<c045e1b0>] (gic_handle_irq) from [<c02019f8>] (__irq_svc+0x58/0x74)
Exception stack(0xeb483f60 to 0xeb483fa8)
3f60: 00000000 00000000 eb9afaa0 c0217e80 00000000 ffffe000 00000000 c0e06408
3f80: 00000002 c0e0647c c0c6a5f0 00000000 c0e04900 eb483fb0 c0207ea8 c0207e98
3fa0: 60020013 ffffffff
[<c02019f8>] (__irq_svc) from [<c0207e98>] (arch_cpu_idle+0x1c/0x38)
[<c0207e98>] (arch_cpu_idle) from [<c0247ca8>] (do_idle+0x138/0x268)
[<c0247ca8>] (do_idle) from [<c0248050>] (cpu_startup_entry+0x18/0x1c)
[<c0248050>] (cpu_startup_entry) from [<402022ec>] (0x402022ec)

Fixes: 5fd752b6b3 ("leds: core: Introduce LED pattern trigger")
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-11-07 21:43:25 +01:00
Liviu Dudau 72b8ad40e1 leds: gpio: set led_dat->gpiod pointer for OF defined GPIO leds
Commit 45d4c6de4e ("leds: gpio: Try to lookup gpiod from device")
removed the common code path that set the led_dat->gpiod pointer in
create_gpio_led(), but only added it back for the devices that have
a valid gpio_led_platform_data structure. Calling gpio_leds_create()
in gpio_led_probe() is not enough to get a valid gpiod pointer.

Fortunately enough, gpio_leds_create() already gets the needed pointer,
we just need to assign it to the relevant gpio_led_data structure.

Fixes: 45d4c6de4e ("leds: gpio: Try to lookup gpiod from device")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-26 20:51:36 +02:00
Pavel Machek 1b50bb4d36 Fix pattern handling optimalization
Check for zero duration before skipping step. This fixes pattern

    echo "0 1000 10 2550 0 1000" > pattern

which should do [  .-xXx-.] but does [   Xx-.]

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Suggested-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-25 20:47:46 +02:00
Baolin Wang 8dbac65f5c leds: sc27xx: Add pattern_set/clear interfaces for LED controller
This patch implements the 'pattern_set'and 'pattern_clear'
interfaces to support SC27XX LED breathing mode.

Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Pavel Machek <pavel@ucw.c>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11 21:59:11 +02:00
Baolin Wang 5fd752b6b3 leds: core: Introduce LED pattern trigger
This patch adds a new LED trigger that LED device can configure
to employ software or hardware pattern engine.

Consumers can write 'pattern' file to enable the software pattern
which alters the brightness for the specified duration with one
software timer.

Moreover consumers can write 'hw_pattern' file to enable the hardware
pattern for some LED controllers which can autonomously control
brightness over time, according to some preprogrammed hardware
patterns.

Signed-off-by: Raphael Teysseyre <rteysseyre@gmail.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-10-11 21:55:58 +02:00
Simon Shields 2d00f35c55 leds: add Panasonic AN30259A support
AN30259A is a 3-channel LED driver which uses I2C. It supports timed
operation via an internal PWM clock, and variable brightness. This
driver offers support for basic hardware-based blinking and brightness
control.

The datasheet is freely available:
https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf

Signed-off-by: Simon Shields <simon@lineageos.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10 21:31:11 +02:00
Linus Walleij 45d4c6de4e leds: gpio: Try to lookup gpiod from device
This augments the GPIO lookup code in the GPIO LEDs to
attempt to look up a GPIO descriptor from the device with
index.

This makes it possible to use GPIO machine look-up tables
and stop passing global GPIO numbers through platform data.

Using this we can stepwise convert existing board files
to use machine descriptor tables and then eventually drop
the legacy GPIO support and only include
<linux/gpio/consumer.h> and use descriptors exclusively.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10 21:14:17 +02:00
Jerome Brunet 9aec30371f leds: pwm: silently error out on EPROBE_DEFER
When probing, if we fail to get the pwm due to probe deferal, we shouldn't
print an error message. Just be silent in this case.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-08 22:47:15 +02:00
Rob Herring f813eec972 leds: Convert to using %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: linux-leds@vger.kernel.org
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-28 22:31:10 +02:00
Kitone Elvis Peter 2224f2ff96 leds: ns2: Change unsigned to unsigned int
Use unsigned int, because it's preferred to unsigned.

Signed-off-by: Kitone Elvis Peter <elviskitone@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-08-06 23:03:12 +02:00
Uwe Kleine-König 9bfd7d9e5d leds: gpio trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
to handle device attributes. Also make use of the module_led_trigger()
helper to simplify trigger registration.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:15 +02:00
Uwe Kleine-König e4786ba0db leds: backlight trigger: simplifications from core changes
Use the new module_led_trigger() helper. Also use
attribute support from the trigger core. Drop error message on
allocation failure as kzalloc() already screams loudly when failing. Use
wrappers to get and set trigger data.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:14 +02:00
Uwe Kleine-König 13d698cbd9 leds: activity trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().

Also make use of module_led_trigger() and the accessor function to get
and set trigger_data.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:14 +02:00
Uwe Kleine-König 5cccc55510 leds: default-on trigger: make use of module_led_trigger()
This removes some boilerplate from the driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:14 +02:00
Uwe Kleine-König 71c4af71e5 leds: heartbeat trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().

Also make use of module_led_trigger() and the accessor function to get
and set trigger_data.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:13 +02:00
Uwe Kleine-König 81d5533297 leds: oneshot trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away in .deactivate().

Also make use of module_led_trigger() and do some minor coding style
improvements.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:13 +02:00
Uwe Kleine-König 823f786ac7 leds: transient trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .activated can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:12 +02:00
Uwe Kleine-König 2b7b6d44e2 leds: timer trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for .trigger_data being non-NULL can go away.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:12 +02:00
Uwe Kleine-König f8112a1de1 leds: netdev trigger: simplifications from core changes
The trigger core learned error handling for the activate callback and
can handle device attributes now. This allows simplifying the driver
considerably. Note that .deactivate() is only called when .activate()
succeeded, so the check for trigger_data being non-NULL can go away.
(It was broken before because the core didn't clear .trigger_data, so it
might have been non-NULL even if .activate() failed before.)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:12 +02:00
Uwe Kleine-König a7d5904a6f leds: triggers: handle .trigger_data and .activated() in the core
This helps keeping these two fields consistent and drivers don't need to
care for this themselves any more.

Note that .activated isn't set to true automatically because that might
confuse some triggers when deactivating (e.g. ledtrig-gpio).

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:10 +02:00
Uwe Kleine-König a7e7a31563 leds: triggers: add device attribute support
As many triggers use device attributes, add support for these in
led_trigger_set which allows simplifying the drivers accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:10 +02:00
Uwe Kleine-König 2282e125a4 leds: triggers: let struct led_trigger::activate() return an error code
Given that activating a trigger can fail, let the callback return an
indication. This prevents to have a trigger active according to the
"trigger" sysfs attribute but not functional.

All users are changed accordingly to return 0 for now. There is no intended
change in behaviour.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 23:21:10 +02:00
Uwe Kleine-König 033692eb3e leds: triggers: make the MODULE_LICENSE string match the actual license
These files are licensed under GPL version 2 only. So use "GPL v2"
instead of "GPL" (which means v2 or later).

Also remove an empty (but commented) line at the end of the license
header which nicely proves in the context that the drivers are really v2
only :-)

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-05 22:59:36 +02:00
Dan Murphy 07abd4325e leds: lm3692x: Support LED sync configuration
The LM36922 has one output but can sync current to 2 LED
strings. The user may only use one sync so the other
syncs need to be disabled.

The LM36923 has 3 LED syncs.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03 22:27:12 +02:00
Dan Murphy 9a5c1c64ac leds: lm3692x: Change DT calls to fwnode calls
Update the code to use the fwnode calls as opposed
to ARM DT node api's.

This allows the device to be used with either DT
configurations or ACPI definitions.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03 22:26:51 +02:00
Dan Murphy 43d20ff363 leds: lm3692x: Update license header to SPDX
Update the license header to the current
SPDX licensing format.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03 22:26:47 +02:00
Colin Ian King 7a5de56db9 leds: max8997: use mode when calling max8997_led_set_mode
Variable mode is assigned to pdata->led_pdata->mode[led->id] and yet
is not being used when calling function max8997_led_set_mode. Fix
this by using mode when calling max8997_led_set_mode.

Cleans up clang warning:
warning: variable 'mode' set but not used [-Wunused-but-set-variable]

Fixes: 8584cb82f1 ("leds: Add suuport for MAX8997-LED driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-07-03 22:12:41 +02:00