The create target ioctl takes a lun begin and lun end parameter, which
defines the range of luns to initialize a target with. If the user does
not set the parameters, it default to only using lun 0. Instead,
defaults to use all luns in the OCSSD, as it is the usual behaviour
users want.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If one specifies the end lun id to be the absolute number of luns,
without taking zero indexing into account, the lightnvm core will pass
the off-by-one end lun id to target creation, which then panics during
nvm_ioctl_dev_create.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When CONFIG_KASAN is enabled, compilation fails:
block/sed-opal.c: In function 'sed_ioctl':
block/sed-opal.c:2447:1: error: the frame size of 2256 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Moved all the ioctl structures off the stack and dynamically allocate
using _IOC_SIZE()
Fixes: 455a7b238c ("block: Add Sed-opal library")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The IOC_OPAL_ACTIVATE_LSP took the wrong strcure which would
give us the wrong size when using _IOC_SIZE, switch it to the
right structure.
Fixes: 058f8a2 ("Include: Uapi: Add user ABI for Sed/Opal")
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since function tables are a common target for attackers, it's best to keep
them in read-only memory. As such, this makes the CDROM device ops tables
const. This drops additionally n_minors, since it isn't used meaningfully,
and sets the only user of cdrom_dummy_generic_packet explicitly so the
variables can all be const.
Inspired by similar changes in grsecurity/PaX.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <axboe@fb.com>
The old elevator= boot parameter blindly attempts to load the
same scheduler for mq and !mq devices, leading to a crash if
we specify the wrong one.
Ensure that we only apply this boot parameter to old !mq devices.
Signed-off-by: Jens Axboe <axboe@fb.com>
Simple cleanup to use the new APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Tested-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In case of error, 'err' is known to be 0 here, because of the previous
test. Set it to a -ENOMEM instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch is a quick fixup of the user structures that will prevent
the structures from being different sizes on 32 and 64 bit archs.
Taking this fix will allow us to *NOT* have to do compat ioctls for
the sed code.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Fixes: 19641f2d76 ("Include: Uapi: Add user ABI for Sed/Opal")
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch implements the necessary logic to unlock an Opal
enabled device coming back from an S3.
The patch also implements the SED/Opal allocation necessary to support
the opal ioctls.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch implements the necessary logic to bring an Opal
enabled drive out of a factory-enabled into a working
Opal state.
This patch set also enables logic to save a password to
be replayed during a resume from suspend.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_set_queue_dying() does not acquire queue lock before it calls
blk_queue_for_each_rl(). This allows a racing blkg_destroy() to
remove blkg->q_node from the linked list and have
blk_queue_for_each_rl() loop infitely over the removed blkg->q_node
list node.
Signed-off-by: Tahsin Erdogan <tahsin@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since __bio_map_user() and bio_map_user() have been removed, update
the comments that still refer to these functions.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
References: commit ddad8dd0a1 ("block: use blk_rq_map_user_iov to implement blk_rq_map_user")
Cc: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
We rely on blk_mq_get_driver_tag() not failing if 'wait' is true,
but it currently fails in that case if the queue happens to be
stopped at the time of the call.
We don't need to check for stopped here, it's just assigning
the tag. If the queue is stopped, we'll handle it when
attempting to run the queue.
This fixes a stall/crash on flush intensive workloads, where
we proceed to process a flush that doesn't have a valid tag
assigned.
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch sets the aborted flag only if an abort was sent, reducing
excessive kernel message spamming for completed IO that wasn't actually
aborted.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
In order to register through the sysfs interface, a driver needs to know
its kobject. On a disk structure, this happens when the partition
information is added (device_add_disk), which for lightnvm takes place
after the target has been initialized. This means that on target
initialization, the kboject has not been created yet.
This patch adds a target function to let targets initialize their own
kboject as a child of the disk kobject.
Signed-off-by: Javier González <javier@cnexlabs.com>
Added exit typedef and passed gendisk instead of void pointer for exit.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix a memory leak when target creation fails. More specifically, free
the entire device structure given to the target (tgt_dev).
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Let the host differentiate between a read error and a CRC check error on
the device side.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the lightnvm core had the "gennvm" layer between the device and the
target, there was a need for the core to be able to figure out which
target it should send an end_io callback to. Leading to a "double"
end_io, first for the media manager instance, and then for the target
instance. Now that core and gennvm is merged, there is no longer a need
for this, and a single end_io callback will do.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Enable user-space to issue vector I/O commands through ioctls. To issue
a vector I/O, the ppa list with addresses is also required and must be
mapped for the controller to access.
For each ioctl, the result and status bits are returned as well, such
that user-space can retrieve the open-channel SSD completion bits.
The implementation covers the traditional use-cases of bad block
management, and vectored read/write/erase.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Metadata implementation, test, and fixes.
Signed-off-by: Simon A.F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The number of configuration groups has been limited to one in current
code, even if there is support for up to four. With the introduction
of the open-channel SSD 1.3 specification, only a single
group is exposed onwards. Reflect this in the nvm_id structure.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Going from target specific ppa addresses to device was accomplished by
first converting target to generic ppa addresses and generic to device
addresses. The conversion was either open-coded or used the built-in
nvm_trans_* and nvm_map_* functions for conversion. Simplify the
interface and cleanup the calls to provide clean functions that now
either take a list of ppas or a nvm_rq, and is exposed through:
void nvm_ppa_* - target to/from device with a list of PPAs,
void nvm_rq_* - target to/from device with a nvm_rq.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The only check there was done was a debugging check. Remove it and
replace the return value with void to reduce error checking.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since the merge of gennvm and core, there is no longer a need for the
device specific bad block functions.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_submit_ppa* functions are no longer needed after gennvm and core
have been merged.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
After gennvm and core have been merged, there are no more callers to
nvm_erase_ppa. Therefore collapse the device specific and target
specific erase functions.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For the first iteration of Open-Channel SSDs, it was anticipated that
there could be various media managers on top of an open-channel SSD,
such to allow vendors to plug in their own host-side FTLs, without the
media manager in between.
Now that an Open-Channel SSD is exposed as a traditional block device,
there is no longer a need for this. Therefore lets merge the gennvm code
with core and simplify the stack.
Signed-off-by: Matias Bjørling <matias@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes a couple of problems:
1. In the !CONFIG_DEBUG_FS case, the stub definitions were bogus.
2. In the !CONFIG_BLOCK case, blk-mq-debugfs.c shouldn't be compiled at
all.
Fix the stub definitions and add a CONFIG_BLK_DEBUG_FS Kconfig option.
Fixes: 07e4fead45 ("blk-mq: create debugfs directory tree")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Augment Kconfig description.
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of letting the caller check this and handle the details
of inserting a flush request, put the logic in the scheduler
insertion function. This fixes direct flush insertion outside
of the usual make_request_fn calls, like from dm via
blk_insert_cloned_request().
Signed-off-by: Jens Axboe <axboe@fb.com>
This centralizes the checks for bios that needs to be go into the flush
state machine.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When we invoke dispatch_requests(), the scheduler empties everything
into the passed in list. This isn't always a good thing, since it
means that we remove items that we could have potentially merged
with.
Change the function to dispatch single requests at the time. If
we do that, we can backoff exactly at the point where the device
can't consume more IO, and leave the rest with the scheduler for
better merging and future dispatch decision making.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
If we have both multiple hardware queues and shared tag map between
devices, we need to ensure that we propagate the hardware queue
restart bit higher up. This is because we can get into a situation
where we don't have any IO pending on a hardware queue, yet we fail
getting a tag to start new IO. If that happens, it's not enough to
mark the hardware queue as needing a restart, we need to bubble
that up to the higher level queue as well.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
We don't want to hold on to this resource when we have a scheduler
attached.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
Once we mark the queue as needing a restart, re-check if we can
get a driver tag. This fixes a theoretical issue where the needed
IO completes _after_ blk_mq_get_driver_tag() fails, but before we
manage to set the restart bit.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
We'll use the same criteria for whether we need to run the queue sync
or async when we have a scheduler, as we do without one.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Tested-by: Hannes Reinecke <hare@suse.com>
These counters aren't as out-of-place in sysfs as the other stuff, but
debugfs is a slightly better home for them.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These statistics _might_ be useful to userspace, but it's better not to
commit to an ABI for these yet. Also, the dispatched file in sysfs
couldn't be cleared, so make it clearable like the others in debugfs.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These can be used to debug issues like tag leaks and stuck requests.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These are very tied to the blk-mq tag implementation, so exposing them
to sysfs isn't a great idea. Move the debugging information to debugfs
and add basic entries for the number of tags and the number of reserved
tags to sysfs.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is useful for debugging problems where we've gotten stuck with
requests in the software queues.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is useful debugging information that will be used in the blk-mq
debugfs directory.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Changed 'weight' to 'busy'.
Signed-off-by: Jens Axboe <axboe@fb.com>
The request pointers by themselves aren't super useful.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
These lists are only useful for debugging; they definitely don't belong
in sysfs. Putting them in debugfs also removes the limitation of a
single page of output.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
hctx->state could come in handy for bugs where the hardware queue gets
stuck in the stopped state, and hctx->flags is just useful to know.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In preparation for putting blk-mq debugging information in debugfs,
create a directory tree mirroring the one in sysfs:
# tree -d /sys/kernel/debug/block
/sys/kernel/debug/block
|-- nvme0n1
| `-- mq
| |-- 0
| | `-- cpu0
| |-- 1
| | `-- cpu1
| |-- 2
| | `-- cpu2
| `-- 3
| `-- cpu3
`-- vda
`-- mq
`-- 0
|-- cpu0
|-- cpu1
|-- cpu2
`-- cpu3
Also add the scaffolding for the actual files that will go in here,
either under the hardware queue or software queue directories.
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't trigger this from the normal IO path, since we always use
blocking allocations from there. But Bart saw it testing multipath
dm, since that is a heavy user of atomic request allocations in
the map and clone path.
Reported-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>