This patch change the API for ndo_xdp_xmit to support bulking
xdp_frames.
When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown.
Most of the slowdown is caused by DMA API indirect function calls, but
also the net_device->ndo_xdp_xmit() call.
Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with
single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed
performance improved:
for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps
for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps
With frames avail as a bulk inside the driver ndo_xdp_xmit call,
further optimizations are possible, like bulk DMA-mapping for TX.
Testing without CONFIG_RETPOLINE show the same performance for
physical NIC drivers.
The virtual NIC driver tun sees a huge performance boost, as it can
avoid doing per frame producer locking, but instead amortize the
locking cost over the bulk.
V2: Fix compile errors reported by kbuild test robot <lkp@intel.com>
V4: Isolated ndo, driver changes and callers.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When sending an xdp_frame through xdp_do_redirect call, then error
cases can happen where the xdp_frame needs to be dropped, and
returning an -errno code isn't sufficient/possible any-longer
(e.g. for cpumap case). This is already fully supported, by simply
calling xdp_return_frame.
This patch is an optimization, which provides xdp_return_frame_rx_napi,
which is a faster variant for these error cases. It take advantage of
the protection provided by XDP RX running under NAPI protection.
This change is mostly relevant for drivers using the page_pool
allocator as it can take advantage of this. (Tested with mlx5).
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The xdp_monitor sample/tool is updated to use the new tracepoint
xdp:xdp_devmap_xmit the previous patch just introduced.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Notice how this allow us get XDP statistic without affecting the XDP
performance, as tracepoint is no-longer activated on a per packet basis.
V5: Spotted by John Fastabend.
Fix 'sent' also counted 'drops' in this patch, a later patch corrected
this, but it was a mistake in this intermediate step.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Like cpumap create queue for xdp frames that will be bulked. For now,
this patch simply invoke ndo_xdp_xmit foreach frame. This happens,
either when the map flush operation is envoked, or when the limit
DEV_MAP_BULK_SIZE is reached.
V5: Avoid memleak on error path in dev_map_update_elem()
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Functionality is the same, but the ndo_xdp_xmit call is now
simply invoked from inside the devmap.c code.
V2: Fix compile issue reported by kbuild test robot <lkp@intel.com>
V5: Cleanups requested by Daniel
- Newlines before func definition
- Use BUILD_BUG_ON checks
- Remove unnecessary use return value store in dev_map_enqueue
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Yonghong Song says:
====================
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, this command will return bpf related information
to user space. Right now it only supports tracepoint/kprobe/uprobe
perf event fd's. For such a fd, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Patch #1 adds function perf_get_event() in kernel/events/core.c.
Patch #2 implements the bpf subcommand BPF_TASK_FD_QUERY.
Patch #3 syncs tools bpf.h header and also add bpf_task_fd_query()
in the libbpf library for samples/selftests/bpftool to use.
Patch #4 adds ksym_get_addr() utility function.
Patch #5 add a test in samples/bpf for querying k[ret]probes and
u[ret]probes.
Patch #6 add a test in tools/testing/selftests/bpf for querying
raw_tracepoint and tracepoint.
Patch #7 add a new subcommand "perf" to bpftool.
Changelogs:
v4 -> v5:
. return strlen(buf) instead of strlen(buf) + 1
in the attr.buf_len. As long as user provides
non-empty buffer, it will be filed with empty
string, truncated string, or full string
based on the buffer size and the length of
to-be-copied string.
v3 -> v4:
. made attr buf_len input/output. The length of
actual buffter is written to buf_len so user space knows
what is actually needed. If user provides a buffer
with length >= 1 but less than required, do partial
copy and return -ENOSPC.
. code simplification with put_user.
. changed query result attach_info to fd_type.
. add tests at selftests/bpf to test zero len, null buf and
insufficient buf.
v2 -> v3:
. made perf_get_event() return perf_event pointer const.
this was to ensure that event fields are not meddled.
. detect whether newly BPF_TASK_FD_QUERY is supported or
not in "bpftool perf" and warn users if it is not.
v1 -> v2:
. changed bpf subcommand name from BPF_PERF_EVENT_QUERY
to BPF_TASK_FD_QUERY.
. fixed various "bpftool perf" issues and added documentation
and auto-completion.
====================
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new tests are added to query perf_event information
for raw_tracepoint and tracepoint attachment. For tracepoint,
both syscalls and non-syscalls tracepoints are queries as
they are treated slightly differently inside the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This is mostly to test kprobe/uprobe which needs kernel headers.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given a kernel function name, ksym_get_addr() will return the kernel
address for this function, or 0 if it cannot find this function name
in /proc/kallsyms. This function will be used later when a kernel
address is used to initiate a kprobe perf event.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync kernel header bpf.h to tools/include/uapi/linux/bpf.h and
implement bpf_task_fd_query() in libbpf. The test programs
in samples/bpf and tools/testing/selftests/bpf, and later bpftool
will use this libbpf function to query kernel.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A new extern function, perf_get_event(), is added to return a perf event
given a struct file. This function will be used in later patches.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mathieu Xhonneux says:
====================
As of Linux 4.14, it is possible to define advanced local processing for
IPv6 packets with a Segment Routing Header through the seg6local LWT
infrastructure. This LWT implements the network programming principles
defined in the IETF "SRv6 Network Programming" draft.
The implemented operations are generic, and it would be very interesting to
be able to implement user-specific seg6local actions, without having to
modify the kernel directly. To do so, this patchset adds an End.BPF action
to seg6local, powered by some specific Segment Routing-related helpers,
which provide SR functionalities that can be applied on the packet. This
BPF hook would then allow to implement specific actions at native kernel
speed such as OAM features, advanced SR SDN policies, SRv6 actions like
Segment Routing Header (SRH) encapsulation depending on the content of
the packet, etc.
This patchset is divided in 6 patches, whose main features are :
- A new seg6local action End.BPF with the corresponding new BPF program
type BPF_PROG_TYPE_LWT_SEG6LOCAL. Such attached BPF program can be
passed to the LWT seg6local through netlink, the same way as the LWT
BPF hook operates.
- 3 new BPF helpers for the seg6local BPF hook, allowing to edit/grow/
shrink a SRH and apply on a packet some of the generic SRv6 actions.
- 1 new BPF helper for the LWT BPF IN hook, allowing to add a SRH through
encapsulation (via IPv6 encapsulation or inlining if the packet contains
already an IPv6 header).
As this patchset adds a new LWT BPF hook, I took into account the result
of the discussions when the LWT BPF infrastructure got merged. Hence, the
seg6local BPF hook doesn't allow write access to skb->data directly, only
the SRH can be modified through specific helpers, which ensures that the
integrity of the packet is maintained. More details are available in the
related patches messages.
The performances of this BPF hook have been assessed with the BPF JIT
enabled on an Intel Xeon X3440 processors with 4 cores and 8 threads
clocked at 2.53 GHz. No throughput losses are noted with the seg6local
BPF hook when the BPF program does nothing (440kpps). Adding a 8-bytes
TLV (1 call each to bpf_lwt_seg6_adjust_srh and bpf_lwt_seg6_store_bytes)
drops the throughput to 410kpps, and inlining a SRH via bpf_lwt_seg6_action
drops the throughput to 420kpps. All throughputs are stable.
Changelog:
v2: move the SRH integrity state from skb->cb to a per-cpu buffer
v3: - document helpers in man-page style
- fix kbuild bugs
- un-break BPF LWT out hook
- bpf_push_seg6_encap is now static
- preempt_enable is now called when the packet is dropped in
input_action_end_bpf
v4: fix kbuild bugs when CONFIG_IPV6=m
v5: fix kbuild sparse warnings when CONFIG_IPV6=m
v6: fix skb pointers-related bugs in helpers
v7: - fix memory leak in error path of End.BPF setup
- add freeing of BPF data in seg6_local_destroy_state
- new enums SEG6_LOCAL_BPF_* instead of re-using ones of lwt bpf for
netlink nested bpf attributes
- SEG6_LOCAL_BPF_PROG attr now contains prog->aux->id when dumping
state
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new test for the seg6local End.BPF action. The following helpers
are also tested:
- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes
A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds the End.BPF action to the LWT seg6local infrastructure.
This action works like any other seg6local End action, meaning that an IPv6
header with SRH is needed, whose DA has to be equal to the SID of the
action. It will also advance the SRH to the next segment, the BPF program
does not have to take care of this.
Since the BPF program may not be a source of instability in the kernel, it
is important to ensure that the integrity of the packet is maintained
before yielding it back to the IPv6 layer. The hook hence keeps track if
the SRH has been altered through the helpers, and re-validates its
content if needed with seg6_validate_srh. The state kept for validation is
stored in a per-CPU buffer. The BPF program is not allowed to directly
write into the packet, and only some fields of the SRH can be altered
through the helper bpf_lwt_seg6_store_bytes.
Performances profiling has shown that the SRH re-validation does not induce
a significant overhead. If the altered SRH is deemed as invalid, the packet
is dropped.
This validation is also done before executing any action through
bpf_lwt_seg6_action, and will not be performed again if the SRH is not
modified after calling the action.
The BPF program may return 3 types of return codes:
- BPF_OK: the End.BPF action will look up the next destination through
seg6_lookup_nexthop.
- BPF_REDIRECT: if an action has been executed through the
bpf_lwt_seg6_action helper, the BPF program should return this
value, as the skb's destination is already set and the default
lookup should not be performed.
- BPF_DROP : the packet will be dropped.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The new bpf_lwt_push_encap helper should only be accessible within the
LWT BPF IN hook, and not the OUT one, as this may lead to a skb under
panic.
At the moment, both LWT BPF IN and OUT share the same list of helpers,
whose calls are authorized by the verifier. This patch separates the
verifier ops for the IN and OUT hooks, and allows the IN hook to call the
bpf_lwt_push_encap helper.
This patch is also the occasion to put all lwt_*_func_proto functions
together for clarity. At the moment, socks_op_func_proto is in the middle
of lwt_inout_func_proto and lwt_xmit_func_proto.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF seg6local hook should be powerful enough to enable users to
implement most of the use-cases one could think of. After some thinking,
we figured out that the following actions should be possible on a SRv6
packet, requiring 3 specific helpers :
- bpf_lwt_seg6_store_bytes: Modify non-sensitive fields of the SRH
- bpf_lwt_seg6_adjust_srh: Allow to grow or shrink a SRH
(to add/delete TLVs)
- bpf_lwt_seg6_action: Apply some SRv6 network programming actions
(specifically End.X, End.T, End.B6 and
End.B6.Encap)
The specifications of these helpers are provided in the patch (see
include/uapi/linux/bpf.h).
The non-sensitive fields of the SRH are the following : flags, tag and
TLVs. The other fields can not be modified, to maintain the SRH
integrity. Flags, tag and TLVs can easily be modified as their validity
can be checked afterwards via seg6_validate_srh. It is not allowed to
modify the segments directly. If one wants to add segments on the path,
he should stack a new SRH using the End.B6 action via
bpf_lwt_seg6_action.
Growing, shrinking or editing TLVs via the helpers will flag the SRH as
invalid, and it will have to be re-validated before re-entering the IPv6
layer. This flag is stored in a per-CPU buffer, along with the current
header length in bytes.
Storing the SRH len in bytes in the control block is mandatory when using
bpf_lwt_seg6_adjust_srh. The Header Ext. Length field contains the SRH
len rounded to 8 bytes (a padding TLV can be inserted to ensure the 8-bytes
boundary). When adding/deleting TLVs within the BPF program, the SRH may
temporary be in an invalid state where its length cannot be rounded to 8
bytes without remainder, hence the need to store the length in bytes
separately. The caller of the BPF program can then ensure that the SRH's
final length is valid using this value. Again, a final SRH modified by a
BPF program which doesn’t respect the 8-bytes boundary will be discarded
as it will be considered as invalid.
Finally, a fourth helper is provided, bpf_lwt_push_encap, which is
available from the LWT BPF IN hook, but not from the seg6local BPF one.
This helper allows to encapsulate a Segment Routing Header (either with
a new outer IPv6 header, or by inlining it directly in the existing IPv6
header) into a non-SRv6 packet. This helper is required if we want to
offer the possibility to dynamically encapsulate a SRH for non-SRv6 packet,
as the BPF seg6local hook only works on traffic already containing a SRH.
This is the BPF equivalent of the seg6 LWT infrastructure, which achieves
the same purpose but with a static SRH per route.
These helpers require CONFIG_IPV6=y (and not =m).
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The function lookup_nexthop is essential to implement most of the seg6local
actions. As we want to provide a BPF helper allowing to apply some of these
actions on the packet being processed, the helper should be able to call
this function, hence the need to make it public.
Moreover, if one argument is incorrect or if the next hop can not be found,
an error should be returned by the BPF helper so the BPF program can adapt
its processing of the packet (return an error, properly force the drop,
...). This patch hence makes this function return dst->error to indicate a
possible error.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
include/net/seg6.h cannot be included in a source file if CONFIG_IPV6 is
not enabled:
include/net/seg6.h: In function 'seg6_pernet':
>> include/net/seg6.h:52:14: error: 'struct net' has no member named
'ipv6'; did you mean 'ipv4'?
return net->ipv6.seg6_data;
^~~~
ipv4
This commit makes seg6_pernet return NULL if IPv6 is not compiled, hence
allowing seg6.h to be included regardless of the configuration.
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sandipan Das says:
====================
[1] Support for bpf-to-bpf function calls in the powerpc64 JIT compiler.
[2] Provide a way for resolving function calls because of the way JITed
images are allocated in powerpc64.
[3] Fix to get JITed instruction dumps for multi-function programs from
the bpf system call.
[4] Fix for bpftool to show delimited multi-function JITed image dumps.
v4:
- Incorporate review comments from Jakub.
- Fix JSON output for bpftool.
v3:
- Change base tree tag to bpf-next.
- Incorporate review comments from Alexei, Daniel and Jakub.
- Make sure that the JITed image does not grow or shrink after
the last pass due to the way the instruction sequence used
to load a callee's address maybe optimized.
- Make additional changes to the bpf system call and bpftool to
make multi-function JITed dumps easier to correlate.
v2:
- Incorporate review comments from Jakub.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
JITed image lengths of each function in a multi-function
program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of the JITed image lengths of each function for a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
This can be used by userspace applications like bpftool
to split up the contiguous JITed dump, also obtained via
the system call, into more relatable chunks corresponding
to each function.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, for multi-function programs, we cannot get the JITed
instructions using the bpf system call's BPF_OBJ_GET_INFO_BY_FD
command. Because of this, userspace tools such as bpftool fail
to identify a multi-function program as being JITed or not.
With the JIT enabled and the test program running, this can be
verified as follows:
# cat /proc/sys/net/core/bpf_jit_enable
1
Before applying this patch:
# bpftool prog list
1: kprobe name foo tag b811aab41a39ad3d gpl
loaded_at 2018-05-16T11:43:38+0530 uid 0
xlated 216B not jited memlock 65536B
...
# bpftool prog dump jited id 1
no instructions returned
After applying this patch:
# bpftool prog list
1: kprobe name foo tag b811aab41a39ad3d gpl
loaded_at 2018-05-16T12:13:01+0530 uid 0
xlated 216B jited 308B memlock 65536B
...
# bpftool prog dump jited id 1
0: nop
4: nop
8: mflr r0
c: std r0,16(r1)
10: stdu r1,-112(r1)
14: std r31,104(r1)
18: addi r31,r1,48
1c: li r3,10
...
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, we resolve the callee's address for a JITed function
call by using the imm field of the call instruction as an offset
from __bpf_call_base. If bpf_jit_kallsyms is enabled, we further
use this address to get the callee's kernel symbol's name.
For some architectures, such as powerpc64, the imm field is not
large enough to hold this offset. So, instead of assigning this
offset to the imm field, the verifier now assigns the subprog
id. Also, a list of kernel symbol addresses for all the JITed
functions is provided in the program info. We now use the imm
field as an index for this list to lookup a callee's symbol's
address and resolve its name.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Syncing the bpf.h uapi header with tools so that struct
bpf_prog_info has the two new fields for passing on the
addresses of the kernel symbols corresponding to each
function in a program.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds new two new fields to struct bpf_prog_info. For
multi-function programs, these fields can be used to pass
a list of kernel symbol addresses for all functions in a
given program to userspace using the bpf system call with
the BPF_OBJ_GET_INFO_BY_FD command.
When bpf_jit_kallsyms is enabled, we can get the address
of the corresponding kernel symbol for a callee function
and resolve the symbol's name. The address is determined
by adding the value of the call instruction's imm field
to __bpf_call_base. This offset gets assigned to the imm
field by the verifier.
For some architectures, such as powerpc64, the imm field
is not large enough to hold this offset.
We resolve this by:
[1] Assigning the subprog id to the imm field of a call
instruction in the verifier instead of the offset of
the callee's symbol's address from __bpf_call_base.
[2] Determining the address of a callee's corresponding
symbol by using the imm field as an index for the
list of kernel symbol addresses now available from
the program info.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This adds support for bpf-to-bpf function calls in the powerpc64
JIT compiler. The JIT compiler converts the bpf call instructions
to native branch instructions. After a round of the usual passes,
the start addresses of the JITed images for the callee functions
are known. Finally, to fixup the branch target addresses, we need
to perform an extra pass.
Because of the address range in which JITed images are allocated
on powerpc64, the offsets of the start addresses of these images
from __bpf_call_base are as large as 64 bits. So, for a function
call, we cannot use the imm field of the instruction to determine
the callee's address. Instead, we use the alternative method of
getting it from the list of function addresses in the auxiliary
data of the caller by using the off field as an index.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For multi-function programs, loading the address of a callee
function to a register requires emitting instructions whose
count varies from one to five depending on the nature of the
address.
Since we come to know of the callee's address only before the
extra pass, the number of instructions required to load this
address may vary from what was previously generated. This can
make the JITed image grow or shrink.
To avoid this, we should generate a constant five-instruction
when loading function addresses by padding the optimized load
sequence with NOPs.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The imm field of a bpf instruction is a signed 32-bit integer.
For JITed bpf-to-bpf function calls, it holds the offset of the
start address of the callee's JITed image from __bpf_call_base.
For some architectures, such as powerpc64, this offset may be
as large as 64 bits and cannot be accomodated in the imm field
without truncation.
We resolve this by:
[1] Additionally using the auxiliary data of each function to
keep a list of start addresses of the JITed images for all
functions determined by the verifier.
[2] Retaining the subprog id inside the off field of the call
instructions and using it to index into the list mentioned
above and lookup the callee's address.
To make sure that the existing JIT compilers continue to work
without requiring changes, we keep the imm field as it is.
Signed-off-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Sparse warning:
kernel/bpf/btf.c:1985:34: warning: Variable length array is used.
This patch directly uses ARRAY_SIZE().
Fixes: f80442a4cd ("bpf: btf: Change how section is supported in btf_header")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On arm32, 'cd tools/testing/selftests/bpf && make' fails with:
libbpf.c:80:10: error: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘int64_t {aka long long int}’ [-Werror=format=]
(func)("libbpf: " fmt, ##__VA_ARGS__); \
^
libbpf.c:83:30: note: in expansion of macro ‘__pr’
#define pr_warning(fmt, ...) __pr(__pr_warning, fmt, ##__VA_ARGS__)
^~~~
libbpf.c:1072:3: note: in expansion of macro ‘pr_warning’
pr_warning("map:%s value_type:%s has BTF type_size:%ld != value_size:%u\n",
To fix, typecast 'key_size' and amend format string.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Selftests fail to build on several distros/architectures because of
missing headers files.
On a Ubuntu/x86_64 some missing headers are:
asm/byteorder.h, asm/socket.h, asm/sockios.h
On a Debian/arm32 build already fails at sys/cdefs.h
In both cases, these already exist in /usr/include/<arch-specific-dir>,
but Clang does not include these when using '-target bpf' flag,
since it is no longer compiling against the host architecture.
The solution is to:
- run Clang without '-target bpf' and extract the include chain for the
current system
- add these to the bpf build with '-idirafter'
The choice of -idirafter is to catch this error without injecting
unexpected include behavior: if an arch-specific tree is built
for bpf in the future, this will be correctly found by Clang.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Martin KaFai Lau says:
====================
This patch set makes some changes to cleanup the unused
bits in BTF uapi. It also makes the btf_header extensible.
Please see individual patches for details.
v2:
- Remove NR_SECS from patch 2
- Remove "unsigned" check on array->index_type from patch 3
- Remove BTF_INT_VARARGS and further limit BTF_INT_ENCODING
from 8 bits to 4 bits in patch 4
- Adjustments in test_btf.c to reflect changes in v2
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Modify libbpf and test_btf to reflect the uapi changes in btf
2. Add test for the btf_header changes
3. Add tests for array->index_type
4. Add err_str check to the tests
5. Fix a 4 bytes hole in "struct test #1" by swapping "m" and "n"
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch sync the uapi bpf.h and btf.h to tools.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In "struct bpf_map_info", the name "btf_id", "btf_key_id" and "btf_value_id"
could cause confusion because the "id" of "btf_id" means the BPF obj id
given to the BTF object while
"btf_key_id" and "btf_value_id" means the BTF type id within
that BTF object.
To make it clear, btf_key_id and btf_value_id are
renamed to btf_key_type_id and btf_value_type_id.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch does the followings:
1. Limit BTF_MAX_TYPES and BTF_MAX_NAME_OFFSET to 64k. We can
raise it later.
2. Remove the BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID. They are
currently encoded at the highest bit of a u32.
It is because the current use case does not require supporting
parent type (i.e type_id referring to a type in another BTF file).
It also does not support referring to a string in ELF.
The BTF_TYPE_PARENT and BTF_STR_TBL_ELF_ID checks are replaced
by BTF_TYPE_ID_CHECK and BTF_STR_OFFSET_CHECK which are
defined in btf.c instead of uapi/linux/btf.h.
3. Limit the BTF_INFO_KIND from 5 bits to 4 bits which is enough.
There is unused bits headroom if we ever needed it later.
4. The root bit in BTF_INFO is also removed because it is not
used in the current use case.
5. Remove BTF_INT_VARARGS since func type is not supported now.
The BTF_INT_ENCODING is limited to 4 bits instead of 8 bits.
The above can be added back later because the verifier
ensures the unused bits are zeros.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Instead of ingoring the array->index_type field. Enforce that
it must be a BTF_KIND_INT in size 1/2/4/8 bytes.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
There are currently unused section descriptions in the btf_header. Those
sections are here to support future BTF use cases. For example, the
func section (func_off) is to support function signature (e.g. the BPF
prog function signature).
Instead of spelling out all potential sections up-front in the btf_header.
This patch makes changes to btf_header such that extending it (e.g. adding
a section) is possible later. The unused ones can be removed for now and
they can be added back later.
This patch:
1. adds a hdr_len to the btf_header. It will allow adding
sections (and other info like parent_label and parent_name)
later. The check is similar to the existing bpf_attr.
If a user passes in a longer hdr_len, the kernel
ensures the extra tailing bytes are 0.
2. allows the section order in the BTF object to be
different from its sec_off order in btf_header.
3. each sec_off is followed by a sec_len. It must not have gap or
overlapping among sections.
The string section is ensured to be at the end due to the 4 bytes
alignment requirement of the type section.
The above changes will allow enough flexibility to
add new sections (and other info) to the btf_header later.
This patch also removes an unnecessary !err check
at the end of btf_parse().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch exposes check_uarg_tail_zero() which will
be reused by a later BTF patch. Its name is changed to
bpf_check_uarg_tail_zero().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David Ahern says:
====================
Packets that exceed the egress MTU can not be forwarded in the fast path.
Add IPv4 and IPv6 MTU helpers that take a FIB lookup result (versus the
typical dst path) and add the calls to bpf_ipv{4,6}_fib_lookup.
v2
- add ip6_mtu_from_fib6 to ipv6_stub
- only call the new MTU helpers for fib lookups in XDP path; skb
path uses is_skb_forwardable to determine if the packet can be
sent via the egress device from the FIB lookup
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add check that egress MTU can handle packet to be forwarded. If
the MTU is less than the packet length, return 0 meaning the
packet is expected to continue up the stack for help - eg.,
fragmenting the packet or sending an ICMP.
The XDP path needs to leverage the FIB entry for an MTU on the
route spec or an exception entry for a given destination. The
skb path lets is_skb_forwardable decide if the packet can be
sent.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Determine path MTU from a FIB lookup result. Logic is based on
ip6_dst_mtu_forward plus lookup of nexthop exception.
Add ip6_dst_mtu_forward to ipv6_stubs to handle access by core
bpf code.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Determine path MTU from a FIB lookup result. Logic is a distillation of
ip_dst_mtu_maybe_forward.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Björn Töpel says:
====================
This the second follow-up set. The first four patches are uapi
changes:
* Removing rebind support
* Getting rid of structure hole
* Removing explicit cache line alignment
* Stricter bind checks
The last patches do some cleanups, where the umem and refcount_t
changes were suggested by Daniel.
* Add a missing write-barrier and use READ_ONCE for data-dependencies
* Clean up umem and do proper locking
* Convert atomic_t to refcount_t
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As suggested by Daniel Borkmann, the umem setup code was a too
defensive and complex. Here, we reduce the number of checks. Also, the
memory pinning is now folded into the umem creation, and we do correct
locking.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jesper Dangaard Brouer
Alexei Starovoitov
Yonghong Song
Daniel Borkmann
Mathieu Xhonneux
Sandipan Das
Martin KaFai Lau
Sirio Balmelli
David Ahern
Björn Töpel