Commit Graph

123579 Commits

Author SHA1 Message Date
Hans Verkuil 77587c5627 V4L/DVB (9940): bt832: remove this driver
The bt832 i2c driver was never used or even compiled and is no longer
maintained. It is now removed completely.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:25 -02:00
Hans Verkuil 49dd1315fa V4L/DVB (9939): tuner: fix tuner_ioctl compile error if V4L1 ioctls are disabled.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:24 -02:00
Andy Walls 55d81aa5c1 V4L/DVB (9937): cx18: Use a consistent crystal value for computing all PLL parameters
Use a consistent crystal value of 28.636360 MHz for computing all PLL
parameters so clocks don't have relative error due to assumed crystal
value mismatches.  Also aimed to have all PLLs run their VOCs at close to
400 MHz to minimze the error of these PLLs as frequency synthesizers. Also
set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware
are loaded.  Also fixed I2S Master clock dividers.

Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and
suggesting the solution, researching and experimenting, and performing
extensive testing to support their suggested solution.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:24 -02:00
Andy Walls 57e24b629a V4L/DVB (9936): cx18: Disable locking of Video and Audio PLL for analog captures
Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for
analog captures.  It seems to have adverse effects on captures from
SVideo and CVBS sources with current clock & crystal settings in the driver.

Many thanks to Jeff Campbell and Mike Bradley for reporting this problem,
and suggesting the solution and performing extensive testing to support their
suggestion.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Reported-by: Mike Bradley <mike.bradley@incanetworks.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:23 -02:00
Hans Verkuil 15029b39bb V4L/DVB (9934): v4l2-compat32: add two additional #ifdef __OLD_VIDIOC_ lines
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:23 -02:00
Hans Verkuil 92f45badbb V4L/DVB (9932): v4l2-compat32: fix 32-64 compatibility module
Added all missing v4l1/2 ioctls and fix several broken conversions.
Partially based on work done by Cody Pisto <cpisto@gmail.com>.

Tested-by: Brandon Jenkins <bcjenkins@tvwhere.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:22 -02:00
Mauro Carvalho Chehab b6070f0756 V4L/DVB (9931): em28xx: de-obfuscate vidioc_g_ctrl logic
vidioc_g_ctrl() were using an uneeded confusing logic. Instead, use the
direct approach.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:22 -02:00
Mauro Carvalho Chehab 5db0b5e1ad V4L/DVB (9930): em28xx: Fix bad locks on error condition
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:21 -02:00
Alan Nisota 02ebf23bc2 V4L/DVB (9928): Convert GP8PSK module to use S2API
This patch converts the gp8psk module to use the S2API.
It pretends to be  DVB-S2 capable in order to allow the various
supported modulations (8PSK, QPSK-Turbo, etc), and keep software
compatibility with the S2API patches for Mythtv and VDR.

Signed-off by: Alan Nisota <alannisota@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:21 -02:00
Mauro Carvalho Chehab bddcf63313 V4L/DVB (9927): em28xx: use a more standard way to specify video formats
This patch uses the same code for enumberating video formats that are
present on cx88, bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:20 -02:00
Mauro Carvalho Chehab 381aaba91d V4L/DVB (9926): em28xx: Fix a bug that were putting xc2028/3028 tuner to sleep
The changeset 78aa52a159cf introduced a bug on em28xx: buffer setup should be
awaking xc3028. Instead, since we didn't specify the tuner mode, the device
were going to sleep, due to the lack of tuner mode when asking tuner to handle
VIDIOC_S_FREQUENCY:

xc2028 0-0061: Device is Xceive 3028 version 1.0, firmware version 2.7
xc2028 0-0061: divisor= 00 00 14 d0 (freq=83.250)
xc2028 0-0061: Putting xc2028/3028 into poweroff mode.
xc2028 0-0061: Printing sleep stack trace:
Pid: 10936, comm: mplayer Tainted: P   M      2.6.27.8 #1

Call Trace:
 [<ffffffffa0b759ea>] xc2028_sleep+0x89/0x1ab [tuner_xc2028]
 [<ffffffffa0b48fb9>] tuner_s_frequency+0xf5/0x165 [tuner]

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:20 -02:00
Mauro Carvalho Chehab 16a5e53d09 V4L/DVB (9925): tuner-core: add debug msg's when asking tuner to sleep
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:19 -02:00
Devin Heitmueller d553cc958a V4L/DVB (9923): xc5000: remove init_fw option
The init_fw option was broken for the HVR-950q because we would call the reset
callback inside of dvb_attach() and the callback had not been setup yet.

Michael Krufky (who added the init_fw feature) says it's no longer required,
so just remove the option completely.

Thanks to user Zzeiss from #linuxtv chat for reporting the issue and
Michael Krufky <mkrufky@linuxtv.org> for proposing the fix.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Acked-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:19 -02:00
Devin Heitmueller c665f4dd99 V4L/DVB (9922): em28xx: don't assume every eb1a:2820 reference design is a Prolink PlayTV USB2
Don't operate under the assumption that every device that uses the em2820
default USB ID is a Prolink PlayTV USB.  We have an eeprom hash, so use that,
since otherwise we cannot support other devices with the 2820 default USB ID
(such as the ADS Tech Instant TV USB USBAV-704)

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:18 -02:00
Devin Heitmueller b1fa26c66c V4L/DVB (9921): em28xx: add chip id for em2874
Add the em2870 to the list of known em28xx chip ids.

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:18 -02:00
Darron Broad 7939273726 V4L/DVB (9918): cx88: advise/acquire clean-up for HVR-1300/3000/4000
This cleans-up the advise/acquire methods.

This has been tested on the hvr-1300/4000 and assumed to be
correct on the hvr-3000.

This update also fixes analogue tuning on the hvr-1300
when in blackbird mode.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:17 -02:00
Darron Broad 6639f1e060 V4L/DVB (9917): cx24116: change to ALGO_HW
Slow tuning, EG:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Appears to be resolved by dropping zig-zag tuning and relying on
hardware only:

> szap-s2 -r -c 39.FTATV "1=Pgm1;Net1"
reading channels from file '39.FTATV'
zapping to 3 '1=Pgm1;Net1':
delivery DVB-S, modulation QPSK
sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35
vpid 0x0200, apid 0x0300, sid 0x0001
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Tuning to a weaker channel shows that the hardware recovers sync:

status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 |
status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 |
status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Also, tuning, moving the dish and then restoring the dish also retunes.

Signed-off-by: Darron Broad <darron@kewl.org>
Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:17 -02:00
Darron Broad 2fac9a0f44 V4L/DVB (9916): dvb-core: don't add an event when in ONE SHOT mode for algo type HW
It has been noticed that in HW tuning mode in cx24123.c that
a check is made to not alter the status var when in one shot
mode, a simpler solution is to not update here for all cards.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:16 -02:00
Darron Broad 2fd9339664 V4L/DVB (9915): cx24116: fix retune regression introduced in 70ee86a7c630
Thanks to AKPM for spotting this.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:16 -02:00
Darron Broad 3569476dce V4L/DVB (9914): cx24116: bugfix: add missing delsys in FEC lookup
Delsys was missing when searching for FEC in table.

This fixes FEC lookup for DVB-S2 QPSK modulation.

Cc: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:15 -02:00
Mauro Carvalho Chehab e278e746bc V4L/DVB (9913): tuner-xc2028: allow printing stack trace as debug on sleep code
tuner-xc3028 can be put to sleep to save power. However, if not properly
recovered from sleep, the device won't work. It is noticed that some
devices doesn't recover properly, so let's add a dump_stack() as a debug
option, to allow us to track when this happens.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:15 -02:00
Mauro Carvalho Chehab efc52a9484 V4L/DVB (9912): em28xx: fix/improve em28xx locking schema
Changes/fixes on em28xx dev->lock:

- em28xx_init_dev() were unlocking without a previous lock;

- some read ioctls need to lock after the removal of KBL, since a write
  may be happening at the same time an ioctl is reading;

- keep the device locked during all device initialization;

- lock/unlock while reading/writing registers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:14 -02:00
Mauro Carvalho Chehab cf8c91c3e7 V4L/DVB (9911): em28xx: vidioc_try_fmt_vid_cap() doesn't need any lock
vidioc_try_fmt_vid_cap() just checks if a given resolution is supported.
It doesn't touch on struct em28xx device descriptor. so, there's no need
to lock.

While there, use unlikely() for those values that aren't likely to
occur.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:14 -02:00
Mauro Carvalho Chehab 29b59417c5 V4L/DVB (9910): em28xx: move res_get locks to the caller routines
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:13 -02:00
Mauro Carvalho Chehab 7831364f33 V4L/DVB (9909): em28xx: move dev->lock from res_free to the caller routines
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:13 -02:00
Hans Verkuil 7d4f0b8153 V4L/DVB (9905): v4l2-compat32: add missing newline after kernel message
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:12 -02:00
Hans Verkuil 69373f6a9c V4L/DVB (9904): v4l: fix compile warning.
Fix (bogus) compile warning about uninitialized variable.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:12 -02:00
Laurent Pinchart 9768352ac1 V4L/DVB (9903): uvcvideo: V4L2 zoom controls support
Add support for absolute and continuous zoom controls (mapped to absolute
and relative UVC zoom controls).

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:11 -02:00
Laurent Pinchart 6df126f834 V4L/DVB (9902): uvcvideo: V4L2 privacy control support
Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:11 -02:00
Laurent Pinchart 74980159e7 V4L/DVB (9899): v4l2: Add missing control names
Update v4l2_ctrl_get_name() and v4l2_ctrl_get_menu() with missing
control names and menu values.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:10 -02:00
Laurent Pinchart 046425f8c4 V4L/DVB (9898): v4l2: Add privacy control
The privacy control prevents video from being acquired by the camera. A true
value indicates that no image can be captured. Devices that implement the
privacy control must support read access and may support write access.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:10 -02:00
Laurent Pinchart 0877258d98 V4L/DVB (9897): v4l2: Add camera zoom controls
The zoom controls move the zoom lens group to a an absolute position, as a
relative displacement or at a given speed until reaching physical device
limits. Positive values move the zoom lens group towards the telephoto
direction, negative values towards the wide-angle direction.

Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:09 -02:00
Andy Walls fd6b9c978d V4L/DVB (9895): cx18: Refine the firmware load and firmware startup process
Refine the firmware load and firmware startup process.  Significant changes
are to ensure the SCB and IPC area are correct before starting up the firmware,
and letting the CPU firmware start up the APU firmware for us.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:09 -02:00
Andy Walls 50b86bac6a V4L/DVB (9894): cx18: Use a known open task handle when setting stream CX2341x parameters
cx18: Use a known open task handle when setting stream CX2341x parameters
Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream.
Let's make sure we use a valid task handle to perform the CX2341x control
settings.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:08 -02:00
Andy Walls f6b181ac3b V4L/DVB (9893): cx18: Convert some list manipulations to emphasize entries not lists
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:08 -02:00
Andy Walls aafc77066f V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issues
VBI comment corrections to avoid future confusion about standards.
Comments on cx18 VBI implementation shortcomings that need resolution.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:07 -02:00
Andy Walls 0ef0289264 V4L/DVB (9891): cx18 Replace magic number 63 with CX18_MAX_FW_MDLS_PER_STREAM
Removed magic number that referred to firmware limit on the number of
MDLs the firmware can maintain for any stream at any one time.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:07 -02:00
Patrick Boettcher 83c3a3c8b6 V4L/DVB (9889): CX24113: Fixed more typos
Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:06 -02:00
Uwe Bugla 14811ac911 V4L/DVB (9888): Patch: fix a typo in cx24113.c
This patch fixes a typo in cx24113.c.

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:06 -02:00
Patrick Boettcher 826c8b6092 V4L/DVB (9887): Minor fixes for cx24113-driver (codingstyle)
Fixed some minor coding style issues and some driver information
printed when using the driver on a board.

Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:05 -02:00
Jean-Francois Moine 1dc87b6e2f V4L/DVB (9884): gspca - ov534: Fix a warning when compilation without GSPCA_DEBUG.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:05 -02:00
Antonio Ospite e6e4837827 V4L/DVB (9883): gspca - ov534: Show sensor ID.
The original version of sccb_read_reg() is from Jim Paris.

NOTE: as it is now reading sensor ID won't work for sensors on different
i2c slave address.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:04 -02:00
Antonio Ospite 15e3209a30 V4L/DVB (9882): gspca - ov534: Fix typo.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:04 -02:00
Jean-Francois Moine 47a42b0b9c V4L/DVB (9880): gspca - vc032x: Add V&H flips and sharpness controls for sensor po1200.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:03 -02:00
Jean-Francois Moine f8ea4af42b V4L/DVB (9879): gspca - vc032x: Remove the unused quality/qindex.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:03 -02:00
Hans de Goede d473a00239 V4L/DVB (9878): gspca - vc032x: Fix frame overflow errors with vc0321.
The vc0321 sends some additional data after sending the complete
frame, we ignore this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:02 -02:00
Jim Paris 11d9f25da8 V4L/DVB (9877): gspca - ov534: Add framerate support.
Add support for getting and setting framerate via v4l2 controls,
rather than setting a fixed value at module insertion.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:02 -02:00
Jim Paris 627a5ef789 V4L/DVB (9876): gspca - main: Allow subdrivers to handle v4l2_streamparm requests.
Add get_streamparm and set_streamparm operations so subdrivers can
get/set stream parameters such as framerate.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:01 -02:00
Jim Paris c06eb61941 V4L/DVB (9874): gspca - ov534: Explicitly initialize frame format.
Set frame format registers 0x0a and 0x0b to explicit values
rather than relying on reset-time defaults.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:01 -02:00
Jim Paris 0f7a50b29d V4L/DVB (9873): gspca - ov534: Improve payload handling.
Frame data in bulk transfers is separated into 2048-byte payloads.
Each payload has its own header.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30 09:39:00 -02:00