Prevent deadlock between open_shroot() and
cifs_mark_open_files_invalid() by releasing the lock before entering
SMB2_open, taking it again after and checking if we still need to use
the result.
Link: https://lore.kernel.org/linux-cifs/684ed01c-cbca-2716-bc28-b0a59a0f8521@prodrive-technologies.com/T/#u
Fixes: 3d4ef9a153 ("smb3: fix redundant opens on root")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
-----BEGIN PGP SIGNATURE-----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=bdbT
-----END PGP SIGNATURE-----
Merge tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
"Fixes (three for stable) and improvements including much faster
encryption (SMB3.1.1 GCM)"
* tag '4.3-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
smb3: smbdirect no longer experimental
cifs: fix crash in smb2_compound_op()/smb2_set_next_command()
cifs: fix crash in cifs_dfs_do_automount
cifs: fix parsing of symbolic link error response
cifs: refactor and clean up arguments in the reparse point parsing
SMB3: query inode number on open via create context
smb3: Send netname context during negotiate protocol
smb3: do not send compression info by default
smb3: add new mount option to retrieve mode from special ACE
smb3: Allow query of symlinks stored as reparse points
cifs: Fix a race condition with cifs_echo_request
cifs: always add credits back for unsolicited PDUs
fs: cifs: cifsssmb: Change return type of convert_ace_to_cifs_ace
add some missing definitions
cifs: fix typo in debug message with struct field ia_valid
smb3: minor cleanup of compound_send_recv
CIFS: Fix module dependency
cifs: simplify code by removing CONFIG_CIFS_ACL ifdef
cifs: Fix check for matching with existing mount
cifs: Properly handle auto disabling of serverino option
...
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
conversion of fsdax in the v4.20 kernel.
- Add a 'resource' (root-only physical base address) sysfs attribute to
device-dax instances to correlate memory-blocks onlined via the kmem
driver with a given device instance.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJdMIETAAoJEB7SkWpmfYgCei0P/A6BpAftQF8bWOX8drjrBj6J
WSrrhmfNPQ0+D+UejfrPUGVg7JysmFpSvfaRkp41nSpKaX6wr6M2uQrHNQl5hIYK
gi5PStYMQay4lM78TrLsFFdDqYX5M6VZhpO3Xgd82bPT2GMXhwckua4ad4WYoN8Y
2ufNajZt/WxBL45VqL1FFqpPK+TKTbVihBR/3W36+NOSJnsj/IH5OlrHswsyq73v
J1YkQY0IvhGR6nZdsNZZV9Faux4jsIVPFW/mh1k1QVLP1r70aJlxcCyka6lRVd4R
ktYFOwtX/B39T72RPQB59Z4LOf/VC9pNaiK7hhWuGQ6XepMo5/0fkhYRslhQobll
7XOYUC01J0jreMu5pvWrZKfaoF9HQwZ1q0NrwNeagZeOgrpoNLqE8WAXUj+c5hsv
x7nPY4XNmRdw2/kkyPotyuRiGkbOOxNEdK0Avhl0id78RFiv4iwMzGdTRT+E9TMb
SLF0KPskqKFcyjECD/zwhR2vEbm54harVqMI4pJU0745bjx/ZEfq+AYZN1Epza3N
O2XYV+uWHi6NXALm195ccGuj2uWtfLHan9OFKyhJgfDbDfIngkr7dgtgCEAKqK9q
zQrLemqeN3Xw2bRldsbg/6mnwhxqyLdoXbJ9JwD1JO1xvsVdElS0/z8dh4KdLv/8
OQ2GIzgB1CyofYuyzpOI
=UB+H
-----END PGP SIGNATURE-----
Merge tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax updates from Dan Williams:
"The fruits of a bug hunt in the fsdax implementation with Willy and a
small feature update for device-dax:
- Fix a hang condition that started triggering after the Xarray
conversion of fsdax in the v4.20 kernel.
- Add a 'resource' (root-only physical base address) sysfs attribute
to device-dax instances to correlate memory-blocks onlined via the
kmem driver with a given device instance"
* tag 'dax-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missed wakeup with PMD faults
device-dax: Add a 'resource' attribute
persistent memory device that allows a guest VM to use DAX mechanisms to
access a host-file with host-page-cache. It arranges for MAP_SYNC to
be disabled and instead triggers a host fsync() when a 'write-cache
flush' command is sent to the virtual disk device.
- Miscellaneous small fixups.
-----BEGIN PGP SIGNATURE-----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=uAMG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl0veOUACgkQ+iyteGJfRsrJbQCeJuXVo5DEBFh8u/9NQ1HnOF5R
d7wAnjgcI/0RvNq+vnGAImQo0NAzk35h
=ycA+
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add Allwinner H6 watchdog
- drop warning after registering device patches
- hpwdt improvements
- gpio: add support for nowayout option
- introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
- convert remaining drivers to use SPDX license identifier
- Fixes and improvements on several watchdog device drivers
* tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe
watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock
watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
watchdog: convert remaining drivers to use SPDX license identifier
dt-bindings: watchdog: Rename bindings documentation file
watchdog: mei_wdt: no need to check return value of debugfs_create functions
watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
docs: watchdog: Fix build error.
docs: watchdog: convert docs to ReST and rename to *.rst
watchdog: make the device time out at open_deadline when open_timeout is used
watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
watchdog: introduce watchdog.open_timeout commandline parameter
dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
watchdog: imx_sc: Add pretimeout support
watchdog: renesas_wdt: Add a few cycles delay
watchdog: gpio: add support for nowayout option
watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly
dt-bindings: watchdog: add Allwinner H6 watchdog
watchdog: jz4740: Avoid starting watchdog in set_timeout
watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>
...
A collection of small fixes.
- The optimization of PM resume with HD-audio HDMI codecs, which
eventually work around weird issues
- A correction of Intel Icelake HDMI audio code
- Quirks for Dell machines with Realtek HD-audio codecs
- The fix for too long sequencer write stall that was spotted by
syzkaller
- A few trivial cleanups reported by coccinelle
-----BEGIN PGP SIGNATURE-----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=p0qg
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes.
- The optimization of PM resume with HD-audio HDMI codecs, which
eventually work around weird issues
- A correction of Intel Icelake HDMI audio code
- Quirks for Dell machines with Realtek HD-audio codecs
- The fix for too long sequencer write stall that was spotted by
syzkaller
- A few trivial cleanups reported by coccinelle"
* tag 'sound-fix-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Don't resume forcibly i915 HDMI/DP codec
ALSA: hda/hdmi - Fix i915 reverse port/pin mapping
ALSA: hda/hdmi - Remove duplicated define
ALSA: seq: Break too long mutex context in the write loop
ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machine
ALSA: rme9652: Unneeded variable: "result".
ALSA: emu10k1: Remove unneeded variable "change"
ALSA: au88x0: Remove unneeded variable: "changed"
ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platform
ALSA: ps3: Remove Unneeded variable: "ret"
ALSA: lx6464es: Remove unneeded variable err
- Add MMIO interface support to the Intel RAPL power capping
driver and update the int340X thermal driver to provide a
RAPL MMIO interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui,
Rajneesh Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang).
-----BEGIN PGP SIGNATURE-----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=Svee
-----END PGP SIGNATURE-----
Merge tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These modify the Intel RAPL driver to allow it to use an MMIO
interface to the hardware, make the int340X thermal driver provide
such an interface for it, add Intel Ice Lake CPU IDs to the RAPL
driver (these changes depend on the previously merged x86 arch
changes), update cpufreq to use the PM QoS framework for managing the
min and max frequency limits, and add update the imx-cpufreq-dt
cpufreq driver to support i.MX8MN.
Specifics:
- Add MMIO interface support to the Intel RAPL power capping driver
and update the int340X thermal driver to provide a RAPL MMIO
interface (Zhang Rui, Stephen Rothwell).
- Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh
Bhardwaj).
- Make cpufreq use the PM QoS framework (instead of notifiers) for
managing the min and max frequency constraints (Viresh Kumar).
- Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson
Huang)"
* tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
cpufreq: Make cpufreq_generic_init() return void
intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state
powercap/rapl: Add Ice Lake NNPI support to RAPL driver
powercap/intel_rapl: add support for ICX-D
powercap/intel_rapl: add support for ICX
powercap/intel_rapl: add support for IceLake desktop
intel_rapl: Fix module autoloading issue
int340X/processor_thermal_device: add support for MMIO RAPL
intel_rapl: support two power limits for every RAPL domain
intel_rapl: support 64 bit register
intel_rapl: abstract RAPL common code
intel_rapl: cleanup hardcoded MSR access
intel_rapl: cleanup some functions
intel_rapl: abstract register access operations
intel_rapl: abstract register address
intel_rapl: introduce struct rapl_if_private
intel_rapl: introduce intel_rapl.h
intel_rapl: remove hardcoded register index
intel_rapl: use reg instead of msr
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
...
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it
to add a quirk for PB Easynote MZ35 (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=PqWP
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These get rid of two clang warnings, add a new quirk mechanism to the
ACPI backlight driver (and apply it to one machine) and update the
table load object initialization in ACPICA (this is a replacement for
a previously reverted ACPICA commit).
Specifics:
- Make ACPI table loading work more consistently regardless of the
exact mechanism used for loading a table (Erik Schmauss).
- Get rid of two clang warnings (Arnd Bergmann).
- Add new quirk mechanism to the ACPI backlight driver and use it to
add a quirk for PB Easynote MZ35 (Hans de Goede)"
* tag 'acpi-5.3-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Add new hw_changes_brightness quirk, set it on PB Easynote MZ35
ACPI: fix false-positive -Wuninitialized warning
ACPI: blacklist: fix clang warning for unused DMI table
ACPICA: Update table load object initialization
Merge floppy ioctl verification fixes from Denis Efremov.
This also marks the floppy driver as orphaned - it turns out that Jiri
no longer has working hardware.
Actual working physical floppy hardware is getting hard to find, and
while Willy was able to test this, I think the driver can be considered
pretty much dead from an actual hardware standpoint. The hardware that
is still sold seems to be mainly USB-based, which doesn't use this
legacy driver at all.
The old floppy disk controller is still emulated in various VM
environments, so the driver isn't going away, but let's see if anybody
is interested to step up to maintain it.
The lack of hardware also likely means that the ioctl range verification
fixes are probably mostly relevant to anybody using floppies in a
virtual environment. Which is probably also going away in favor of USB
storage emulation, but who knows.
Will Decon reviewed the patches but I'm not rebasing them just for that,
so I'll add a
Reviewed-by: Will Deacon <will@kernel.org>
here instead.
* floppy:
MAINTAINERS: mark floppy.c orphaned
floppy: fix out-of-bounds read in copy_buffer
floppy: fix invalid pointer dereference in drive_name
floppy: fix out-of-bounds read in next_valid_format
floppy: fix div-by-zero in setup_format_params
I volunteered myself to maintain it quite some time ago back when I
fixed the concurrency issues which exhibited itself only with
VM-emulated devices, and at the same time I still had the physical 3.5"
reader to test all the changes.
The reader doesn't work any more though, so I guess it's time to step
down from this super-prestigious role :p and mark floppy.c as Orphaned.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pm-cpufreq:
cpufreq: Make cpufreq_generic_init() return void
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Add QoS requests for userspace constraints
cpufreq: intel_pstate: Reuse refresh_frequency_limits()
cpufreq: Register notifiers with the PM QoS framework
PM / QoS: Add support for MIN/MAX frequency constraints
PM / QOS: Pass request type to dev_pm_qos_read_value()
PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()
PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
This fixes a global out-of-bounds read access in the copy_buffer
function of the floppy driver.
The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect
and head fields (unsigned int) of the floppy_drive structure are used to
compute the max_sector (int) in the make_raw_rw_request function. It is
possible to overflow the max_sector. Next, max_sector is passed to the
copy_buffer function and used in one of the memcpy calls.
An unprivileged user could trigger the bug if the device is accessible,
but requires a floppy disk to be inserted.
The patch adds the check for the .sect * .head multiplication for not
overflowing in the set_geometry function.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes the invalid pointer dereference in the drive_name function of
the floppy driver.
The native_format field of the struct floppy_drive_params is used as
floppy_type array index in the drive_name function. Thus, the field
should be checked the same way as the autodetect field.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. Next, FDGETDRVTYP ioctl should
be used to call the drive_name. A floppy disk is not required to be
inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for a value of the native_format field to be in
the '0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array
indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a global out-of-bounds read access in the next_valid_format
function of the floppy driver.
The values from autodetect field of the struct floppy_drive_params are
used as indices for the floppy_type array in the next_valid_format
function 'floppy_type[DP->autodetect[probed_format]].sect'.
To trigger the bug, one could use a value out of range and set the drive
parameters with the FDSETDRVPRM ioctl. A floppy disk is not required to
be inserted.
CAP_SYS_ADMIN is required to call FDSETDRVPRM.
The patch adds the check for values of the autodetect field to be in the
'0 <= x < ARRAY_SIZE(floppy_type)' range of the floppy_type array indices.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a divide by zero error in the setup_format_params function of
the floppy driver.
Two consecutive ioctls can trigger the bug: The first one should set the
drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK
to become zero. Next, the floppy format operation should be called.
A floppy disk is not required to be inserted. An unprivileged user
could trigger the bug if the device is accessible.
The patch checks F_SECT_PER_TRACK for a non-zero value in the
set_geometry function. The proper check should involve a reasonable
upper limit for the .sect and .rate fields, but it could change the
UAPI.
The patch also checks F_SECT_PER_TRACK in the setup_format_params, and
cancels the formatting operation in case of zero.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov <efremov@ispras.ru>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide better naming for ABI, i.e. tell that we have fan boost mode.
The following is an automated git shortlog grouped by driver:
asus:
- Rename "fan mode" to "fan boost mode"
-----BEGIN PGP SIGNATURE-----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=ZhHh
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull another x86 platform driver update from Andy Shevchenko:
"Provide better naming for ABI, i.e. tell that we have fan boost mode.
It won't break any ABI, but has to be done now to avoid confusion in
the future"
* tag 'platform-drivers-x86-v5.3-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: asus: Rename "fan mode" to "fan boost mode"
- Revert a SPIO GPIO fix that didn't fix anything instead created new
problems.
- Remove the EM GPIO irqdomain in a safe manner.
- Fix a memory leak in the gpio quirks.
- Make the DaVinci error path silent on probe deferral.
-----BEGIN PGP SIGNATURE-----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=/5s0
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- Revert a SPIO GPIO fix that didn't fix anything but instead created
new problems.
- Remove the EM GPIO irqdomain in a safe manner.
- Fix a memory leak in the gpio quirks.
- Make the DaVinci error path silent on probe deferral.
* tag 'gpio-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio/spi: Fix spi-gpio regression on active high CS"
gpio: em: remove the gpiochip before removing the irq domain
gpiolib: of: fix a memory leak in of_gpio_flags_quirks()
gpio: davinci: silence error prints in case of EPROBE_DEFER
This contains support for hardware spinlock TI K3 AM65x and J721E family
of SoCs, support for using hwspinlocks from atomic context and better
error reporting when dealing with hardware disabled in DeviceTree.
-----BEGIN PGP SIGNATURE-----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=Dz9r
-----END PGP SIGNATURE-----
Merge tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc
Pull hwspinlock updates from Bjorn Andersson:
"This contains support for hardware spinlock TI K3 AM65x and J721E
family of SoCs, support for using hwspinlocks from atomic context and
better error reporting when dealing with hardware disabled in
DeviceTree"
* tag 'hwlock-v5.3' of git://github.com/andersson/remoteproc:
hwspinlock: add the 'in_atomic' API
hwspinlock: document the hwspinlock 'raw' API
hwspinlock: stm32: implement the relax() ops
hwspinlock: ignore disabled device
hwspinlock/omap: Add a trace during probe
hwspinlock/omap: Add support for TI K3 SoCs
dt-bindings: hwlock: Update OMAP binding for TI K3 SoCs
This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP. Initial
support for vendor specific resource table entries and support for
unprocessed Qualcomm firmware files.
-----BEGIN PGP SIGNATURE-----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=iqXq
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.3' of git://github.com/andersson/remoteproc
Pull remoteproc updates from Bjorn Andersson:
"This adds support for the STM32 remoteproc, additional i.MX platforms
with Cortex M4 remoteprocs and Qualcomm's QCS404 Compute DSP.
Also initial support for vendor specific resource table entries and
support for unprocessed Qualcomm firmware files"
* tag 'rproc-v5.3' of git://github.com/andersson/remoteproc:
remoteproc: stm32: fix building without ARM SMCC
remoteproc: qcom: q6v5-mss: Fix build error without QCOM_MDT_LOADER
remoteproc: copy parent dma_pfn_offset for vdev
remoteproc: qcom: q6v5-mss: Support loading non-split images
soc: qcom: mdt_loader: Support loading non-split images
remoteproc: stm32: add an ST stm32_rproc driver
dt-bindings: remoteproc: add bindings for stm32 remote processor driver
dt-bindings: stm32: add bindings for ML-AHB interconnect
remoteproc: Use struct_size() helper
remoteproc: add vendor resources handling
remoteproc: imx: Fix typo in "failed"
remoteproc: imx: Broaden the Kconfig selection logic
remoteproc,rpmsg: add missing MAINTAINERS file entries
remoteproc: qcom: qdsp6-adsp: Add support for QCS404 CDSP
dt-bindings: remoteproc: Rename and amend Hexagon v56 binding
This contains a DT binding update and a change to make the remote
function of rpmsg_devices optional.
-----BEGIN PGP SIGNATURE-----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=ktVg
-----END PGP SIGNATURE-----
Merge tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc
Pull rpmsg updates from Bjorn Andersson:
"This contains a DT binding update and a change to make the remote
function of rpmsg_devices optional"
* tag 'rpmsg-v5.3' of git://github.com/andersson/remoteproc:
rpmsg: core: Make remove handler for rpmsg driver optional.
dt-bindings: soc: qcom: Add remote-pid binding for GLINK SMEM
new iommu device
vhost guest memory access using vmap (just meta-data for now)
minor fixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Note: due to code driver changes the driver-core tree, the following
patch is needed when merging tree with commit 92ce7e83b4
("driver_find_device: Unify the match function with
class_find_device()") in the driver-core tree:
From: Nathan Chancellor <natechancellor@gmail.com>
Subject: [PATCH] iommu/virtio: Constify data parameter in viommu_match_node
After commit 92ce7e83b4 ("driver_find_device: Unify the match
function with class_find_device()") in the driver-core tree.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
drivers/iommu/virtio-iommu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/iommu/virtio-iommu.c b/drivers/iommu/virtio-iommu.c
index 4620dd221ffd..433f4d2ee956 100644
--- a/drivers/iommu/virtio-iommu.c
+++ b/drivers/iommu/virtio-iommu.c
@@ -839,7 +839,7 @@ static void viommu_put_resv_regions(struct device *dev, struct list_head *head)
static struct iommu_ops viommu_ops;
static struct virtio_driver virtio_iommu_drv;
-static int viommu_match_node(struct device *dev, void *data)
+static int viommu_match_node(struct device *dev, const void *data)
{
return dev->parent->fwnode == data;
}
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdJ5qUAAoJECgfDbjSjVRpQs0H/2qWcIG1zjGKyh9KWrfgOusG
/QIqeP50d7SC6oqdyd00tzmExqO1xdGLPFzYixdOsU817te1gHBP4Rfmzo01jZRd
CUzZNnZQ2JRsDshiA6G2ui+wn1/a/cB3RPN4rT1mquDYS53QmsRGDQDnpp84TXMV
aocB8TS6halbRzKMq3VmaWHIvzNXnt4dwQR542+PyeLLn9bUx2QwWj2ON3QwxixK
dVRZow3GwLGBhKTA/Z1Z/Bta4fEfOKjUGP2XWgvL6zOr+nZR4eQ8w5WXVJYzR+d6
1JCfqTxleweT2k6Tu5VwtTNlQkxn/XvQAeisppOiEE6NnPjubyI9wMQIvL7bkpo=
=uJbC
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio, vhost updates from Michael Tsirkin:
"Fixes, features, performance:
- new iommu device
- vhost guest memory access using vmap (just meta-data for now)
- minor fixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-mmio: add error check for platform_get_irq
scsi: virtio_scsi: Use struct_size() helper
iommu/virtio: Add event queue
iommu/virtio: Add probe request
iommu: Add virtio-iommu driver
PCI: OF: Initialize dev->fwnode appropriately
of: Allow the iommu-map property to omit untranslated devices
dt-bindings: virtio: Add virtio-pci-iommu node
dt-bindings: virtio-mmio: Add IOMMU description
vhost: fix clang build warning
vhost: access vq metadata through kernel virtual address
vhost: factor out setting vring addr and num
vhost: introduce helpers to get the size of metadata area
vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch()
vhost: fine grain userspace memory accessors
vhost: generalize adding used elem
- Static symbol cleanup in mdev samples (Kefeng Wang)
- Use vma help in nvlink code (Peng Hao)
- Remove unused code in mbochs sample (YueHaibing)
- Send uevents around mdev registration (Alex Williamson)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=2tVO
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Static symbol cleanup in mdev samples (Kefeng Wang)
- Use vma help in nvlink code (Peng Hao)
- Remove unused code in mbochs sample (YueHaibing)
- Send uevents around mdev registration (Alex Williamson)
* tag 'vfio-v5.3-rc1' of git://github.com/awilliam/linux-vfio:
mdev: Send uevents around parent device registration
sample/mdev/mbochs: remove set but not used variable 'mdev_state'
vfio: vfio_pci_nvlink2: use a vma helper function
vfio-mdev/samples: make some symbols static
side. The two main highlights in the core framework are the addition of an bulk
clk_get API that handles optional clks and an extra debugfs file that tells the
developer about the current parent of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is mostly
because that SoC has started converting to the clk_hw style of clk
registration. The next big update is in the Amlogic meson clk driver that
gained some support for audio, cpu, and temperature clks while fixing some PLL
issues. Finally, the biggest thing that stands out is the conversion of a large
part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses
less strings and more pointer comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks here and
there to clk data along with the normal addition of a handful of new drivers
and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1
-----BEGIN PGP SIGNATURE-----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=mK0C
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round of clk driver and framework updates is heavy on the driver
update side. The two main highlights in the core framework are the
addition of an bulk clk_get API that handles optional clks and an
extra debugfs file that tells the developer about the current parent
of a clk.
The driver updates are dominated by i.MX in the diffstat, but that is
mostly because that SoC has started converting to the clk_hw style of
clk registration. The next big update is in the Amlogic meson clk
driver that gained some support for audio, cpu, and temperature clks
while fixing some PLL issues. Finally, the biggest thing that stands
out is the conversion of a large part of the Allwinner sunxi-ng driver
to the new clk parent scheme that uses less strings and more pointer
comparisons to match clk parents and children up.
In general, it looks like we have a lot of little fixes and tweaks
here and there to clk data along with the normal addition of a handful
of new drivers and a couple new core framework features.
Core:
- Add a 'clk_parent' file in clk debugfs
- Add a clk_bulk_get_optional() API (with devm too)
New Drivers:
- Support gated clk controller on MIPS based BCM63XX SoCs
- Support SiLabs Si5341 and Si5340 chips
- Support for CPU clks on Raspberry Pi devices
- Audsys clock driver for MediaTek MT8516 SoCs
Updates:
- Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme
- Small frequency support for SiLabs Si544 chips
- Slow clk support for AT91 SAM9X60 SoCs
- Remove dead code in various clk drivers (-Wunused)
- Support for Marvell 98DX1135 SoCs
- Get duty cycle of generic pwm clks
- Improvement in mmc phase calculation and cleanup of some rate defintions
- Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs
- Add GPIO, SNVS and GIC clocks for i.MX8 drivers
- Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock
- Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting
- Add clks for new Exynos5422 Dynamic Memory Controller driver
- Clock definition for Exynos4412 Mali
- Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M
- Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs
- TI clock probing done from DT by default instead of firmware
- Fix Amlogic Meson mpll fractional part and spread sprectrum issues
- Add Amlogic meson8 audio clocks
- Add Amlogic g12a temperature sensors clocks
- Add Amlogic g12a and g12b cpu clocks
- Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N
- Add CMM (Color Management Module) clocks on Renesas R-Car M3-W
- Add Clock Domain support on Renesas RZ/N1"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits)
clk: consoldiate the __clk_get_hw() declarations
clk: sprd: Add check for return value of sprd_clk_regmap_init()
clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK
clk: Add Si5341/Si5340 driver
dt-bindings: clock: Add silabs,si5341
clk: clk-si544: Implement small frequency change support
clk: add BCM63XX gated clock controller driver
devicetree: document the BCM63XX gated clock bindings
clk: at91: sckc: use dedicated functions to unregister clock
clk: at91: sckc: improve error path for sama5d4 sck registration
clk: at91: sckc: remove unnecessary line
clk: at91: sckc: improve error path for sam9x5 sck register
clk: at91: sckc: add support to free slow clock osclillator
clk: at91: sckc: add support to free slow rc oscillator
clk: at91: sckc: add support to free slow oscillator
clk: rockchip: export HDMIPHY clock on rk3228
clk: rockchip: add watchdog pclk on rk3328
clk: rockchip: add clock id for hdmi_phy special clock on rk3228
clk: rockchip: add clock id for watchdog pclk on rk3328
clk: at91: sckc: add support for SAM9X60
...
Drivers:
- ds1307: properly handle oscillator failure flags
- imx-sc: alarm support
- pcf2123: alarm support, correct offset handling
- sun6i: add R40 support
- simplify getting the adapter of an i2c client
-----BEGIN PGP SIGNATURE-----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=aJ54
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"A quiet cycle this time.
- ds1307: properly handle oscillator failure flags
- imx-sc: alarm support
- pcf2123: alarm support, correct offset handling
- sun6i: add R40 support
- simplify getting the adapter of an i2c client"
* tag 'rtc-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (37 commits)
rtc: wm831x: Add IRQF_ONESHOT flag
rtc: stm32: remove one condition check in stm32_rtc_set_alarm()
rtc: pcf2123: Fix build error
rtc: interface: Change type of 'count' from int to u64
rtc: pcf8563: Clear event flags and disable interrupts before requesting irq
rtc: pcf8563: Fix interrupt trigger method
rtc: pcf2123: fix negative offset rounding
rtc: pcf2123: add alarm support
rtc: pcf2123: use %ptR
rtc: pcf2123: port to regmap
rtc: pcf2123: remove sysfs register view
rtc: rx8025: simplify getting the adapter of a client
rtc: rx8010: simplify getting the adapter of a client
rtc: rv8803: simplify getting the adapter of a client
rtc: m41t80: simplify getting the adapter of a client
rtc: fm3130: simplify getting the adapter of a client
rtc: tegra: Drop MODULE_ALIAS
rtc: sun6i: Add R40 compatible
dt-bindings: rtc: sun6i: Add the R40 RTC compatible
dt-bindings: rtc: Convert Allwinner A31 RTC to a schema
...
- Add support in dmaengine core to do device node checks for DT devices and
update bunch of drivers to use that and remove open coding from drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
-----BEGIN PGP SIGNATURE-----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=R+aC
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Add support in dmaengine core to do device node checks for DT devices
and update bunch of drivers to use that and remove open coding from
drivers
- New driver/driver support for new hardware, namely:
- MediaTek UART APDMA
- Freescale i.mx7ulp edma2
- Synopsys eDMA IP core version 0
- Allwinner H6 DMA
- Updates to axi-dma and support for interleaved cyclic transfers
- Greg's debugfs return value check removals on drivers
- Updates to stm32-dma, hsu, dw, pl330, tegra drivers
* tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support"
dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback
Documentation: dmaengine: clean up description of dmatest usage
dmaengine: tegra210-adma: remove PM_CLK dependency
dmaengine: fsl-edma: add i.mx7ulp edma2 version support
dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma
dmaengine: fsl-edma-common: version check for v2 instead
dmaengine: fsl-edma-common: move dmamux register to another single function
dmaengine: fsl-edma: add drvdata for fsl-edma
dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver"
dmaengine: rcar-dmac: Reject zero-length slave DMA requests
dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake
dmaengine: dw-edma: fix semicolon.cocci warnings
dmaengine: sh: usb-dmac: Use [] to denote a flexible array member
dmaengine: dmatest: timeout value of -1 should specify infinite wait
dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit
dmaengine: fsl-edma: support little endian for edma driver
dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width"
dmagengine: pl330: add code to get reset property
dt-bindings: pl330: document the optional resets property
...
- Removal of readq & writeq for MIPS32 kernels where they would simply
BUG() anyway, allowing drivers or other code that #ifdefs on their
presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure a
bunch more devices.
- Miscellaneous cleanups & build fixes.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXS85dBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN2yJwEA6SUzzTXdywxEy78Ala3tzghMjkD5
818q6a9DREGofyIA/ie08di/MIYS9++ETsaQemVXoe7KT333+SgTeXCb1lIJ
=RiKE
-----END PGP SIGNATURE-----
Merge tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
"A light batch this time around but significant improvements for
certain systems:
- Removal of readq & writeq for MIPS32 kernels where they would
simply BUG() anyway, allowing drivers or other code that #ifdefs on
their presence to work properly.
- Improvements for Ingenic JZ4740 systems, including support for the
external memory controller & pinmuxing fixes for qi_lb60/NanoNote
systems.
- Improvements for Lantiq systems, in particular around SMP & IPIs.
- DT updates for ralink/MediaTek MT7628a systems to probe & configure
a bunch more devices.
- Miscellaneous cleanups & build fixes"
* tag 'mips_5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
MIPS: fix some more fall through errors in arch/mips
MIPS: perf events: handle switch statement falling through warnings
mips/kprobes: Export kprobe_fault_handler()
MAINTAINERS: Add myself as Ingenic SoCs maintainer
MIPS: ralink: mt7628a.dtsi: Add watchdog controller DT node
MIPS: ralink: mt7628a.dtsi: Add SPI controller DT node
MIPS: ralink: mt7628a.dtsi: Add GPIO controller DT node
MIPS: ralink: mt7628a.dtsi: Add pinctrl DT properties to the UART nodes
MIPS: ralink: mt7628a.dtsi: Add pinmux DT node
MIPS: ralink: mt7628a.dtsi: Add SPDX GPL-2.0 license identifier
MIPS: lantiq: Add SMP support for lantiq interrupt controller
MIPS: lantiq: Shorten register names, remove unused macros
MIPS: lantiq: Fix bitfield masking
MIPS: lantiq: Remove unused macros
MIPS: lantiq: Fix attributes of of_device_id structure
MIPS: lantiq: Change variables to the same type as the source
MIPS: lantiq: Move macro directly to iomem function
mips: Remove q-accessors from non-64bit platforms
FDDI: defza: Include linux/io-64-nonatomic-lo-hi.h
MIPS: configs: Remove useless UEVENT_HELPER_PATH
...
-----BEGIN PGP SIGNATURE-----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=QkoY
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux
Pull SH updates from Yoshinori Sato.
kprobe fix, defconfig updates and a SH Kconfig fix.
* tag 'for-linus-20190617' of git://git.sourceforge.jp/gitroot/uclinux-h8/linux:
arch/sh: Check for kprobe trap number before trying to handle a kprobe trap
sh: configs: Remove useless UEVENT_HELPER_PATH
Fix allyesconfig output.
The Asus WMI spec indicates that the function being controlled here
is called "Fan Boost Mode". The user-facing documentation also calls it
this.
The spec uses the term "fan mode" is used to refer to other things,
including functionality expected to appear on future products.
We missed this before as we are not dealing with the most readable of
specs, and didn't forsee any confusion around shortening the name.
Rename "fan mode" to "fan boost mode" to improve consistency with the
spec and to avoid a future naming conflict.
There is no interface breakage here since this has yet to be included
in an official kernel release. I also updated the kernel version listed
under ABI accordingly.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Acked-by: Yurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Merge more updates from Andrew Morton:
"VM:
- z3fold fixes and enhancements by Henry Burns and Vitaly Wool
- more accurate reclaimed slab caches calculations by Yafang Shao
- fix MAP_UNINITIALIZED UAPI symbol to not depend on config, by
Christoph Hellwig
- !CONFIG_MMU fixes by Christoph Hellwig
- new novmcoredd parameter to omit device dumps from vmcore, by
Kairui Song
- new test_meminit module for testing heap and pagealloc
initialization, by Alexander Potapenko
- ioremap improvements for huge mappings, by Anshuman Khandual
- generalize kprobe page fault handling, by Anshuman Khandual
- device-dax hotplug fixes and improvements, by Pavel Tatashin
- enable synchronous DAX fault on powerpc, by Aneesh Kumar K.V
- add pte_devmap() support for arm64, by Robin Murphy
- unify locked_vm accounting with a helper, by Daniel Jordan
- several misc fixes
core/lib:
- new typeof_member() macro including some users, by Alexey Dobriyan
- make BIT() and GENMASK() available in asm, by Masahiro Yamada
- changed LIST_POISON2 on x86_64 to 0xdead000000000122 for better
code generation, by Alexey Dobriyan
- rbtree code size optimizations, by Michel Lespinasse
- convert struct pid count to refcount_t, by Joel Fernandes
get_maintainer.pl:
- add --no-moderated switch to skip moderated ML's, by Joe Perches
misc:
- ptrace PTRACE_GET_SYSCALL_INFO interface
- coda updates
- gdb scripts, various"
[ Using merge message suggestion from Vlastimil Babka, with some editing - Linus ]
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits)
fs/select.c: use struct_size() in kmalloc()
mm: add account_locked_vm utility function
arm64: mm: implement pte_devmap support
mm: introduce ARCH_HAS_PTE_DEVMAP
mm: clean up is_device_*_page() definitions
mm/mmap: move common defines to mman-common.h
mm: move MAP_SYNC to asm-generic/mman-common.h
device-dax: "Hotremove" persistent memory that is used like normal RAM
mm/hotplug: make remove_memory() interface usable
device-dax: fix memory and resource leak if hotplug fails
include/linux/lz4.h: fix spelling and copy-paste errors in documentation
ipc/mqueue.c: only perform resource calculation if user valid
include/asm-generic/bug.h: fix "cut here" for WARN_ON for __WARN_TAINT architectures
scripts/gdb: add helpers to find and list devices
scripts/gdb: add lx-genpd-summary command
drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl
kernel/pid.c: convert struct pid count to refcount_t
drivers/rapidio/devices/rio_mport_cdev.c: NUL terminate some strings
select: shift restore_saved_sigmask_unless() into poll_select_copy_remaining()
select: change do_poll() to return -ERESTARTNOHAND rather than -EINTR
...
This patch fixes below sparse warning related to __virtio
type in virtio pmem driver. This is reported by Intel test
bot on linux-next tree.
nd_virtio.c:56:28: warning: incorrect type in assignment
(different base types)
nd_virtio.c:56:28: expected unsigned int [unsigned] [usertype] type
nd_virtio.c:56:28: got restricted __virtio32
nd_virtio.c:93:59: warning: incorrect type in argument 2
(different base types)
nd_virtio.c:93:59: expected restricted __virtio32 [usertype] val
nd_virtio.c:93:59: got unsigned int [unsigned] [usertype] ret
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
RocksDB can hang indefinitely when using a DAX file. This is due to
a bug in the XArray conversion when handling a PMD fault and finding a
PTE entry. We use the wrong index in the hash and end up waiting on
the wrong waitqueue.
There's actually no need to wait; if we find a PTE entry while looking
for a PMD entry, we can return immediately as we know we should fall
back to a PTE fault (which may not conflict with the lock held).
We reuse the XA_RETRY_ENTRY to signal a conflicting entry was found.
This value can never be found in an XArray while holding its lock, so
it does not create an ambiguity.
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/CAPcyv4hwHpX-MkUEqxwdTj7wCCZCN4RV-L4jsnuwLGyL_UEG4A@mail.gmail.com
Fixes: b15cd80068 ("dax: Convert page fault handlers to XArray")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Robert Barror <robert.barror@intel.com>
Reported-by: Seema Pandit <seema.pandit@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kmalloc(size, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:
instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL);
Also, notice that variable size is unnecessary, hence it is removed.
This code was detected with the help of Coccinelle.
Link: http://lkml.kernel.org/r/20190604164226.GA13823@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
locked_vm accounting is done roughly the same way in five places, so
unify them in a helper.
Include the helper's caller in the debug print to distinguish between
callsites.
Error codes stay the same, so user-visible behavior does too. The one
exception is that the -EPERM case in tce_account_locked_vm is removed
because Alexey has never seen it triggered.
[daniel.m.jordan@oracle.com: v3]
Link: http://lkml.kernel.org/r/20190529205019.20927-1-daniel.m.jordan@oracle.com
[sfr@canb.auug.org.au: fix mm/util.c]
Link: http://lkml.kernel.org/r/20190524175045.26897-1-daniel.m.jordan@oracle.com
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Cc: Alan Tull <atull@kernel.org>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Moritz Fischer <mdf@kernel.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order for things like get_user_pages() to work on ZONE_DEVICE memory,
we need a software PTE bit to identify device-backed PFNs. Hook this up
along with the relevant helpers to join in with ARCH_HAS_PTE_DEVMAP.
[robin.murphy@arm.com: build fixes]
Link: http://lkml.kernel.org/r/13026c4e64abc17133bbfa07d7731ec6691c0bcd.1559050949.git.robin.murphy@arm.com
Link: http://lkml.kernel.org/r/817d92886fc3b33bcbf6e105ee83a74babb3a5aa.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ARCH_HAS_ZONE_DEVICE is somewhat meaningless in itself, and combined
with the long-out-of-date comment can lead to the impression than an
architecture may just enable it (since __add_pages() now "comprehends
device memory" for itself) and expect things to work.
In practice, however, ZONE_DEVICE users have little chance of
functioning correctly without __HAVE_ARCH_PTE_DEVMAP, so let's clean
that up the same way as ARCH_HAS_PTE_SPECIAL and make it the proper
dependency so the real situation is clearer.
Link: http://lkml.kernel.org/r/87554aa78478a02a63f2c4cf60a847279ae3eb3b.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Acked-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refactor is_device_{public,private}_page() with is_pci_p2pdma_page() to
make them all consistent in depending on their respective config options
even when CONFIG_DEV_PAGEMAP_OPS is enabled for other reasons. This
allows a little more compile-time optimisation as well as the conceptual
and cosmetic cleanup.
Link: http://lkml.kernel.org/r/187c2ab27dea70635d375a61b2f2076d26c032b0.1558547956.git.robin.murphy@arm.com
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Suggested-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two architecture that use arch specific MMAP flags are powerpc and
sparc. We still have few flag values common across them and other
architectures. Consolidate this in mman-common.h.
Also update the comment to indicate where to find HugeTLB specific
reserved values
Link: http://lkml.kernel.org/r/20190604090950.31417-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This enables support for synchronous DAX fault on powerpc
The generic changes are added as part of b6fb293f24 ("mm: Define
MAP_SYNC and VM_SYNC flags")
Without this, mmap returns EOPNOTSUPP for MAP_SYNC with
MAP_SHARED_VALIDATE
Instead of adding MAP_SYNC with same value to
arch/powerpc/include/uapi/asm/mman.h, I am moving the #define to
asm-generic/mman-common.h. Two architectures using mman-common.h
directly are sparc and powerpc. We should be able to consloidate more
#defines to mman-common.h. That can be done as a separate patch.
Link: http://lkml.kernel.org/r/20190528091120.13322-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is now allowed to use persistent memory like a regular RAM, but
currently there is no way to remove this memory until machine is
rebooted.
This work expands the functionality to also allows hotremoving
previously hotplugged persistent memory, and recover the device for use
for other purposes.
To hotremove persistent memory, the management software must first
offline all memory blocks of dax region, and than unbind it from
device-dax/kmem driver. So, operations should look like this:
echo offline > /sys/devices/system/memory/memoryN/state
...
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
Note: if unbind is done without offlining memory beforehand, it won't be
possible to do dax0.0 hotremove, and dax's memory is going to be part of
System RAM until reboot.
Link: http://lkml.kernel.org/r/20190517215438.6487-4-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Presently the remove_memory() interface is inherently broken. It tries
to remove memory but panics if some memory is not offline. The problem
is that it is impossible to ensure that all memory blocks are offline as
this function also takes lock_device_hotplug that is required to change
memory state via sysfs.
So, between calling this function and offlining all memory blocks there
is always a window when lock_device_hotplug is released, and therefore,
there is always a chance for a panic during this window.
Make this interface to return an error if memory removal fails. This
way it is safe to call this function without panicking machine, and also
makes it symmetric to add_memory() which already returns an error.
Link: http://lkml.kernel.org/r/20190517215438.6487-3-pasha.tatashin@soleen.com
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series ""Hotremove" persistent memory", v6.
Recently, adding a persistent memory to be used like a regular RAM was
added to Linux. This work extends this functionality to also allow hot
removing persistent memory.
We (Microsoft) have an important use case for this functionality.
The requirement is for physical machines with small amount of RAM (~8G)
to be able to reboot in a very short period of time (<1s). Yet, there
is a userland state that is expensive to recreate (~2G).
The solution is to boot machines with 2G preserved for persistent
memory.
Copy the state, and hotadd the persistent memory so machine still has
all 8G available for runtime. Before reboot, offline and hotremove
device-dax 2G, copy the memory that is needed to be preserved to pmem0
device, and reboot.
The series of operations look like this:
1. After boot restore /dev/pmem0 to ramdisk to be consumed by apps.
and free ramdisk.
2. Convert raw pmem0 to devdax
ndctl create-namespace --mode devdax --map mem -e namespace0.0 -f
3. Hotadd to System RAM
echo dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
echo dax0.0 > /sys/bus/dax/drivers/kmem/new_id
echo online_movable > /sys/devices/system/memoryXXX/state
4. Before reboot hotremove device-dax memory from System RAM
echo offline > /sys/devices/system/memoryXXX/state
echo dax0.0 > /sys/bus/dax/drivers/kmem/unbind
5. Create raw pmem0 device
ndctl create-namespace --mode raw -e namespace0.0 -f
6. Copy the state that was stored by apps to ramdisk to pmem device
7. Do kexec reboot or reboot through firmware if firmware does not
zero memory in pmem0 region (These machines have only regular
volatile memory). So to have pmem0 device either memmap kernel
parameter is used, or devices nodes in dtb are specified.
This patch (of 3):
When add_memory() fails, the resource and the memory should be freed.
Link: http://lkml.kernel.org/r/20190517215438.6487-2-pasha.tatashin@soleen.com
Fixes: c221c0b030 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ross Zwisler <zwisler@kernel.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a few spelling and grammar errors, and two places where fast/safe in
the documentation did not match the function.
Link: http://lkml.kernel.org/r/20190321014452.13297-1-tomlevy93@gmail.com
Signed-off-by: Tom Levy <tomlevy93@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andreas Christoforou reported:
UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow:
9 * 2305843009213693951 cannot be represented in type 'long int'
...
Call Trace:
mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414
evict+0x472/0x8c0 fs/inode.c:558
iput_final fs/inode.c:1547 [inline]
iput+0x51d/0x8c0 fs/inode.c:1573
mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320
mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459
vfs_mkobj+0x39e/0x580 fs/namei.c:2892
prepare_open ipc/mqueue.c:731 [inline]
do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771
Which could be triggered by:
struct mq_attr attr = {
.mq_flags = 0,
.mq_maxmsg = 9,
.mq_msgsize = 0x1fffffffffffffff,
.mq_curmsgs = 0,
};
if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1)
perror("mq_open");
mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and
preparing to return -EINVAL. During the cleanup, it calls
mqueue_evict_inode() which performed resource usage tracking math for
updating "user", before checking if there was a valid "user" at all
(which would indicate that the calculations would be sane). Instead,
delay this check to after seeing a valid "user".
The overflow was real, but the results went unused, so while the flaw is
harmless, it's noisy for kernel fuzzers, so just fix it by moving the
calculation under the non-NULL "user" where it actually gets used.
Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Andreas Christoforou <andreaschristofo@gmail.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For architectures using __WARN_TAINT, the WARN_ON macro did not print
out the "cut here" string. The other WARN_XXX macros would print "cut
here" inside __warn_printk, which is not called for WARN_ON since it
doesn't have a message to print.
Link: http://lkml.kernel.org/r/20190624154831.163888-1-ddavenport@chromium.org
Fixes: a7bed27af1 ("bug: fix "cut here" location for __WARN_TAINT architectures")
Signed-off-by: Drew Davenport <ddavenport@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add helper commands and functions for finding pointers to struct device
by enumerating linux device bus/class infrastructure. This can be used
to fetch subsystem and driver-specific structs:
(gdb) p *$container_of($lx_device_find_by_class_name("net", "eth0"), "struct net_device", "dev")
(gdb) p *$container_of($lx_device_find_by_bus_name("i2c", "0-004b"), "struct i2c_client", "dev")
(gdb) p *(struct imx_port*)$lx_device_find_by_class_name("tty", "ttymxc1")->parent->driver_data
Several generic "lx-device-list" functions are included to enumerate
devices by bus and class:
(gdb) lx-device-list-bus usb
(gdb) lx-device-list-class
(gdb) lx-device-list-tree &platform_bus
Similar information is available in /sys but pointer values are
deliberately hidden.
Link: http://lkml.kernel.org/r/c948628041311cbf1b9b4cff3dda7d2073cb3eaa.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is like /sys/kernel/debug/pm/pm_genpd_summary except it's
accessible through a debugger.
This can be useful if the target crashes or hangs because power domains
were not properly enabled.
Link: http://lkml.kernel.org/r/f9ee627a0d4f94b894aa202fee8a98444049bed8.1561492937.git.leonard.crestez@nxp.com
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Aurelien Aptel
Linus Torvalds
Jiri Kosina
Rafael J. Wysocki
Denis Efremov
Daniel Drake
Pankaj Gupta
Matthew Wilcox (Oracle)
Gustavo A. R. Silva
Daniel Jordan
Robin Murphy
Aneesh Kumar K.V
Pavel Tatashin
Tom Levy
Kees Cook
Drew Davenport
Leonard Crestez