Commit Graph

48 Commits

Author SHA1 Message Date
Magnus Damm fe326c5cc0 clocksource/drivers/sh_mtu2: Fix multiple shutdown call issue
On the r7s72100 Genmai board the MTU2 driver currently triggers a common
clock framework WARN_ON(enable_count) when disabling the clock due to
the MTU2 driver after recent callback rework may call ->set_state_shutdown()
multiple times. A similar issue was spotted for the TMU driver and fixed in:
452b132 clocksource/drivers/sh_tmu: Fix traceback spotted in -next

On r7s72100 Genmai v4.3-rc7 built with shmobile_defconfig spits out the
following during boot:

sh_mtu2 fcff0000.timer: ch0: used for clock events
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:675 clk_core_disable+0x2c/0x6c()
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc7 #1
Hardware name: Generic R7S72100 (Flattened Device Tree)
Backtrace:
[<c00133d4>] (dump_backtrace) from [<c0013570>] (show_stack+0x18/0x1c)
[<c0013558>] (show_stack) from [<c01c7aac>] (dump_stack+0x74/0x90)
[<c01c7a38>] (dump_stack) from [<c00272fc>] (warn_slowpath_common+0x88/0xb4)
[<c0027274>] (warn_slowpath_common) from [<c0027400>] (warn_slowpath_null+0x24/0x2c)
[<c00273dc>] (warn_slowpath_null) from [<c03a9320>] (clk_core_disable+0x2c/0x6c)
[<c03a92f4>] (clk_core_disable) from [<c03aa0a0>] (clk_disable+0x40/0x4c)
[<c03aa060>] (clk_disable) from [<c0395d2c>] (sh_mtu2_disable+0x24/0x50)
[<c0395d08>] (sh_mtu2_disable) from [<c0395d6c>] (sh_mtu2_clock_event_shutdown+0x14/0x1c)
[<c0395d58>] (sh_mtu2_clock_event_shutdown) from [<c007d7d0>] (clockevents_switch_state+0xc8/0x114)
[<c007d708>] (clockevents_switch_state) from [<c007d834>] (clockevents_shutdown+0x18/0x28)
[<c007d81c>] (clockevents_shutdown) from [<c007dd58>] (clockevents_exchange_device+0x70/0x78)
[<c007dce8>] (clockevents_exchange_device) from [<c007e578>] (tick_check_new_device+0x88/0xe0)
[<c007e4f0>] (tick_check_new_device) from [<c007daf0>] (clockevents_register_device+0xac/0x120)
[<c007da44>] (clockevents_register_device) from [<c0395be8>] (sh_mtu2_probe+0x230/0x350)
[<c03959b8>] (sh_mtu2_probe) from [<c028b6f0>] (platform_drv_probe+0x50/0x98)

Reported-by: Chris Brandt <chris.brandt@renesas.com>
Fixes: 19a9ffb ("clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface")
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
2015-10-28 15:22:56 +01:00
Viresh Kumar 19a9ffb3d6 clockevents/drivers/sh_mtu2: Migrate to new 'set-state' interface
Migrate sh_mtu2 driver to the new 'set-state' interface provided by
clockevents core, the earlier 'set-mode' interface is marked obsolete
now.

This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.

Cc: Magnus Damm <damm+renesas@opensource.se>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-08-10 11:40:38 +02:00
Laurent Pinchart cca8d0596c clocksource: sh_mtu2: Add DT support
Document DT bindings and parse them in the MTU2 driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-04 15:50:29 +02:00
Laurent Pinchart 8b2463d8ca clocksource: sh_mtu2: Replace global spinlock with a per-device spinlock
The global spinlock is used to protect the shared start/stop register.
Now that all MTU2 channels are handled by a single device instance, use
a per-device spinlock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-02 16:01:50 +02:00
Laurent Pinchart 1a5da0e43b clocksource: sh_mtu2: Drop support for legacy platform data
Now that all platforms have switched to the new-style platform data,
drop support for the legacy version.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-07-02 16:01:50 +02:00
Jingoo Han c77a565b29 clocksource: sh_mtu2: Remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they
duplicate the MM subsystem generic OOM message.

[dlezcano] : refreshed against latest modifications: kmalloc -> kzalloc

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-05-23 09:23:11 +02:00
Laurent Pinchart 346f5e76b3 clocksource: sh_mtu2: Sort headers alphabetically
This helps locating duplicates and inserting new headers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:34 +02:00
Laurent Pinchart 24c8f71707 clocksource: sh_mtu2: Remove FSF mail address from GPL notice
Do not include the paragraph about writing to the Free Software
Foundation's mailing address from the sample GPL notice. The FSF has
changed addresses in the past, and may do so again. Linux already
includes a copy of the GPL.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:33 +02:00
Laurent Pinchart 6dc9693bb3 clocksource: sh_mtu2: Rename clock to "fck" in the non-legacy case
The sh_mtu2 driver gets the MTU2 functional clock using a connection ID
of "mtu2_fck". While all SH SoCs create clock lookup entries with a NULL
device ID and a "mtu2_fck" connection ID, the ARM SoCs use the device ID
only with a NULL connection ID. This works on legacy platforms but will
break on ARM with DT boot.

Fix the situation by using a connection ID of "fck" in the non-legacy
platform data case. Clock lookup entries will be renamed to use the
device ID as well as the connection ID as platforms get moved to new
platform data. The legacy code will eventually be dropped, leaving us
with device ID based clock lookup, compatible with DT boot.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:33 +02:00
Laurent Pinchart faf3f4f8c8 clocksource: sh_mtu2: Add support for multiple channels per device
MTU2 hardware devices can support multiple channels, with global
registers and per-channel registers. The sh_mtu2 driver currently models
the hardware with one Linux device per channel. This model makes it
difficult to handle global registers in a clean way.

Add support for a new model that uses one Linux device per timer with
multiple channels per device. This requires changes to platform data,
add new channel configuration fields.

Support for the legacy model is kept and will be removed after all
platforms switch to the new model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:32 +02:00
Laurent Pinchart 207e21a973 clocksource: sh_mtu2: Hardcode MTU2 clock event rating to 200
All boards use clock event ratings of 200 for the MTU2, hardcode it in
the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:32 +02:00
Laurent Pinchart 3cc9504798 clocksource: sh_mtu2: Set cpumask to cpu_possible_mask
The MTU2 is not tied to CPU0, make it usable on any CPU.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:31 +02:00
Laurent Pinchart f992c2410b clocksource: sh_mtu2: Replace hardcoded register values with macros
Define symbolic macros for all used registers bits.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:30 +02:00
Laurent Pinchart c54ccb431c clocksource: sh_mtu2: Allocate channels dynamically
This prepares the driver for multi-channel support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:30 +02:00
Laurent Pinchart 810c651369 clocksource: sh_mtu2: Replace kmalloc + memset with kzalloc
One kzalloc a day keeps the bugs away.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:29 +02:00
Laurent Pinchart d2b9317706 clocksource: sh_mtu2: Add index to struct sh_mtu2_channel
Use the index as the timer start/stop bit and when printing messages to
identify the channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:29 +02:00
Laurent Pinchart da90a1c677 clocksource: sh_mtu2: Add memory base to sh_mtu2_channel structure
The channel memory base is channel-specific, add it to the channel
structure in preparation for support of multiple channels per device.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:28 +02:00
Laurent Pinchart aa83804af7 clocksource: sh_mtu2: Constify name argument to sh_mtu2_register()
The name argument is assigned to const structure fields only, constify
it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:28 +02:00
Laurent Pinchart 2e1a53265d clocksource: sh_mtu2: Split channel setup to separate function
Move the channel setup code from sh_mtu2_setup to a new
sh_mtu2_setup_channel function and call it from sh_mtu2_setup.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:27 +02:00
Laurent Pinchart 7dad72de1b clocksource: sh_mtu2: Rename struct sh_mtu2_priv to sh_mtu2_device
Channel data is private as well, rename priv to device to make the
distrinction between the core device and the channels clearer.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:27 +02:00
Laurent Pinchart 42752cc619 clocksource: sh_mtu2: Split channel fields from sh_mtu2_priv
Create a new sh_mtu2_channel structure to hold the channel-specific
fields in preparation for multiple channels per device support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:26 +02:00
Laurent Pinchart f92d62f539 clocksource: sh_mtu2: Turn sh_mtu2_priv fields into local variables
The rate and periodic fields are used in a single function only, as
local variables. Remove them from the structure.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:25 +02:00
Laurent Pinchart 276bee05d8 clocksource: sh_mtu2: Use request_irq() instead of setup_irq()
The driver claims it needs to register an interrupt handler too early
for request_irq(). This might have been true in the past, but the only
meaningful difference between request_irq() and setup_irq() today is an
additional kzalloc() call in request_irq(). As the driver calls
kmalloc() itself we know that the slab allocator is available, we can
thus switch to request_irq().

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Wolfram Sang <wsa@sang-engineering.com>
2014-04-16 12:03:25 +02:00
Ingo Molnar 1b3f828760 Merge branch 'clockevents/3.14' of git://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/clockevent updates from Daniel Lezcano:

  * Axel Lin removed an unused structure defining the ids for the
    bcm kona driver.

  * Ezequiel Garcia enabled the timer divider only when the 25MHz
    timer is not used for the armada 370 XP.

  * Jingoo Han removed a pointless platform data initialization for
    the sh_mtu and sh_mtu2.

  * Laurent Pinchart added the clk_prepare/clk_unprepare for sh_cmt.

  * Linus Walleij added a useful warning in clk_of when no clocks
    are found while the old behavior was to silently hang at boot time.

  * Maxime Ripard added the high speed timer drivers for the
    Allwinner SoCs (A10, A13, A20). He increased the rating, shared the
    irq across all available cpus and fixed the clockevent's irq
    initialization for the sun4i.

  * Michael Opdenacker removed the usage of the IRQF_DISABLED for the
    all the timers driver located in drivers/clocksource.

  * Stephen Boyd switched to sched_clock_register for the
    arm_global_timer, cadence_ttc, sun4i and orion timers.

Conflicts:
	drivers/clocksource/clksrc-of.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-14 14:33:29 +01:00
Michael Opdenacker 38c30a8421 clocksource: misc drivers: Remove deprecated IRQF_DISABLED
This patch removes the use of the IRQF_DISABLED flag

It's a NOOP since 2.6.35 and it will be removed one day.

[dlezcano] : slightly changed the changelog

Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11 11:40:27 +01:00
Jingoo Han 87d4bb9fce clocksource: sh_mtu2: Remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-12-11 11:40:27 +01:00
Laurent Pinchart bd7549308e clocksource: sh_mtu2: Add clk_prepare/unprepare support
Prepare the clock at probe time, as there is no other appropriate place
in the driver where we're allowed to sleep.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20 21:55:22 +01:00
Laurent Pinchart a4a5fc3b64 clocksource: sh_mtu2: Release clock when sh_mtu2_register() fails
Fix the probe error path to release the clock resource when the
sh_mtu2_register() call fails.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-11-20 21:55:21 +01:00
Simon Horman 342896a5c5 clocksource: sh_mtu2: Set initcall level to subsys
The reason for this is to ensure that MTU2 is probed earlier
than with its previous initcall level, module init.

This came up as a problem with using CMT as a clock source kzm9g-reference
which does not make use of early timers or devices. In that scenario
initialisation of SDHI and MMCIF both stall on msleep() calls due to the
absence of a initialised clock source.

The purpose of this change is to keep the MTU2 code in sync with the CMT code
which has been modified in a similar manner..

Compile tested only using se7206_defconfig.
I do not believe I have any boards that support the MTU2.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-03-13 02:24:37 +09:00
Greg Kroah-Hartman 1850514b3e Drivers: clocksource: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:15 -08:00
Rafael J. Wysocki 3cb6f10a4d sh: MTU2: Basic runtime PM support
Modify the SH MTU2 clock event device driver to support runtime PM at
a basic level (i.e. device clocks can be disabled and enabled, but
domain power must be on, because the device has to be marked as
"irq safe").

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:05 +02:00
Rafael J. Wysocki dbf374142d PM / Domains: Move syscore flag from subsys data to struct device
The syscore device PM flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  That flag is
stored in the device's struct pm_subsys_data object whose address is
available from struct device.  However, in some situations it may be
convenient to set that flag before the device is added to a PM
domain, so it is better to move it directly to the "power" member of
struct device.  Then, it can be checked by the routines in
drivers/base/power/runtime.c and drivers/base/power/main.c, which is
more straightforward.

This also reduces the number of dev_gpd_data() invocations in the
generic PM domains framework, so the overhead related to the syscore
flag is slightly smaller.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:04 +02:00
Rafael J. Wysocki 6fb28badf2 PM / Domains: Rename the always_on device flag to syscore
The always_on device flag is used to mark the devices (belonging to
a PM domain) that should never be turned off, except for the system
core (syscore) suspend/hibernation and resume stages.  Change name
of that flag to "syscore" to better reflect its purpose.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:03 +02:00
Rafael J. Wysocki cc7ad4564b sh: MTU2: Introduce clock events suspend/resume routines
Introduce suspend/resume routines for SH MTU2 clock event devices
such that if those devices belong to a PM domain, the generic PM
domains framework will be notified that the given domain may be
turned off (during system suspend) or that it has to be turned on
(during system resume).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
2012-09-04 01:36:02 +02:00
Paul Mundt 50393a92c8 clocksource: sh_mtu2: Convert timer lock to raw spinlock.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-06-11 16:01:42 +09:00
Rafael J. Wysocki 57d13370cf PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()
Make the MTU2 clocksource driver mark its device as "always on"
using pm_genpd_dev_always_on() to protect it from surprise power
removals.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: stable@vger.kernel.org
2012-03-16 21:45:26 +01:00
Paul Gortmaker 7deeab5dc4 drivers/clocksource: Add module.h to those who were using it implicitly
A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in clocksource
are actually calling out for <module.h> explicitly in advance.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:42 -04:00
Magnus Damm 03ff858c09 ARM: shmobile: remove sh_timer_config clk member
Now when the SH-Mobile ARM platforms have been converted
to use device name it is possible to remove "clk" from
struct sh_timer_config.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31 10:40:39 -04:00
Paul Mundt e19553427c Merge branch 'sh/stable-updates'
Conflicts:
	arch/sh/kernel/dwarf.c
	drivers/dma/shdma.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-26 16:08:27 +09:00
Paul Mundt fecf066c2d sh: Disable IRQ balancing for timer and IPI IRQs.
Make sure that the timer IRQs and IPIs aren't enabled for IRQ balancing.
IPIs are disabled as a result of being percpu while the timers simply
disable balancing outright.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-15 11:59:28 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Paul Mundt c2a25e8197 clocksource: Deprecate clock string across the SH drivers.
We want to get rid of the clock string from platform data entirely,
depending on the clkdev-based clock lookup to do the right thing for us
instead.

This converts all of the SH drivers to request their associated function
clocks directly, and if there is no match for that then we fall back on
the legacy lookup while warning about it. After all of the outstanding
CPUs have been converted to clkdev lookups the clock string will be
killed off completely.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-29 16:55:43 +09:00
Paul Mundt 214a607a4f clocksource: Use dev_name() universally across the SH drivers.
There is no need to copy in the name from the sh timer config now that
dev_name() is available early. We prefer the dev_name() variant for
consistent naming.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-10 16:26:25 +09:00
Paul Mundt da64c2a8de clocksource: Fix up a registration/IRQ race in the sh drivers.
All of the SH clocksource drivers follow the scheme that the IRQ is setup
prior to registering the clockevent. The interrupt handler in the
clockevent cases looks to the event handler function pointer being filled
in by the registration code, permitting us to get in to situations where
asserted IRQs step in to the handler before registration has had a chance
to complete and hitting a NULL pointer deref.

In practice this is not an issue for most platforms, but some of them
with fairly special loaders (or that are chain-loading from another
kernel) may enter in to this situation. This fixes up the oops reported
by Rafael on hp6xx.

Reported-and-tested-by: Rafael Ignacio Zurita <rafaelignacio.zurita@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:37:46 +09:00
Paul Mundt e7fad451f0 clocksource: Drop unused irqaction.mask from SH drivers.
The irqaction.mask is legacy code that is wholly unused and going away,
so simply drop its use in the SH drivers completely.

Fixes up build failures in -next.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-06-14 21:18:24 +09:00
Paul Mundt d1fcc0a8db clocksource: sh_mtu2/cmt_register() should be static.
Neither of these need to be exported, so just make them static.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 18:05:42 +09:00
Paul Mundt 46a12f7426 sh: Consolidate MTU2/CMT/TMU timer platform data.
All of the SH timers use a roughly identical structure for platform data,
which presently is broken out for each block. Consolidate all of these
definitions, as there is no reason for them to be broken out in the first
place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:57:17 +09:00
Magnus Damm d5ed4c2e5c clocksource: SuperH MTU2 Timer driver
This patch adds a MTU2 driver for the SuperH architecture.

The MTU2 driver is a platform driver with early platform
support to allow using a MTU2 channel as only clockevent
during system bootup.

Clocksource on sh2a is currently unsupported due to code
generation issues with 64-bit math, so at this point only
periodic clockevent support is in place.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-03 17:36:02 +09:00