Commit Graph

11102 Commits

Author SHA1 Message Date
Janusz Krzysztofik 1cff502d8b OMAP1: camera.h: add missing include
#include <media/omap1_camera.h> directive is required to
compile the dependant boards (board-ams-delta for now).

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-05 12:13:10 -07:00
Mathias Nyman e860e6da96 omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts
Flush the writes to IRQSTATUS_L0 register in the DMA interrupt handler by reading the register
directly after write. This prevents the spurious DMA interrupts noted when using VDD_OPP 1

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Acked-by: Santosh Shilimkar <Santosh.shilimkar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-05 12:13:10 -07:00
Thomas Weber b7283945c5 OMAP2: Devkit8000: Fix mmc regulator failure
This patch fixes the following error:

>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
>twl_reg twl_reg.6: can't register VMMC1, -22
>twl_reg: probe of twl_reg.6 failed with error -22

Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-11-05 12:13:10 -07:00
Mike Rapoport 7350f41972 ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases
Wrong MPP configuration would cause <cpu>_mpp_conf loop infinitely
because the mpp list iterator would not be incremented.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-11-05 13:34:29 -04:00
Michael Spang 377304abef [ARM] TS-78xxx NAND resource type should be IORESOURCE_MEM
The type was IORESOURCE_IO which is not what is expected by
plat_nand_probe(). This device has not worked since 2d098a72
("mtd: plat_nand: request memory resource before doing ioremap").

Signed-off-by: Michael Spang <mspang@csclub.uwaterloo.ca>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-11-05 13:32:08 -04:00
Paul Mundt cad3cde3f6 ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.
As non-PFC chips are added that may support IRQs, pass through to the
generic helper. This follows the the SH change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-04 12:19:11 +09:00
Eric Miao 72feb6e7cb ARM: pxa/saar: fix the building failure caused by typo
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
2010-11-03 23:11:19 +08:00
Mike Rapoport 51e930ae44 ARM: pxa/cm-x2xx: remove duplicate call to pxa27x_init_irq
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-03 23:11:18 +08:00
Eric Miao 12cdcc8523 ARM: pxa: fix the missing definition of IRQ_BOARD_END
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Cc: Mike Rapoport <mike@compulab.co.il>
2010-11-03 23:11:17 +08:00
Haojian Zhuang 3073f0fa2b ARM: mmp: fix cpuid detection on mmp2
Fix typo error on cpu_is_mmp2(). Correct cpu_readid_id() to
read_cpuid_id().  Append missing parenthesis.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-11-03 23:11:16 +08:00
Guennadi Liakhovetski 5c4e0f198d ARM: mach-shmobile: fix sh7372 after a recent clock framework rework
The updated sh clock framework has introduced a .nr_freqs element of struct
clk, which has to be initialised with the number of possible frequencies.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-02 11:52:37 -04:00
Alberto Panizzo f0573e6db1 mach-pcm037_eet: Fix section mismatch for eet_init_devices()
This function should be marked as __init because it is used only
in the init phase.

This fix the compiler warning:
 LD      arch/arm/mach-mx3/built-in.o
 WARNING: arch/arm/mach-mx3/built-in.o(.text+0x1328): Section mismatch in reference from the function eet_init_devices() to the (unknown reference) .init.rodata:(unknown)
 The function eet_init_devices() references
 the (unknown reference) __initconst (unknown).
 This is often because eet_init_devices lacks a __initconst
 annotation or the annotation of (unknown) is wrong.

Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-02 08:49:40 +01:00
Paul Mundt be8cb585d2 ARM: mach-shmobile: include drivers/sh/Kconfig
Many of the config bit are presently duplicated between the platforms,
which will gradually cleaned up through centralization. For the moment we
expose some new INTC features through drivers/sh/Kconfig that the ARM
platforms presently don't enable, so make it generally available.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01 11:38:06 -04:00
Linus Torvalds 90ae83f7fc Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: fix erroneous platform data in U300
  spi: fixed odd static string conventions in core code
  spi/bfin_spi: only request GPIO on first load
  spi/bfin_spi: handle error/status changes after data interrupts
  spi: enable spi_board_info to be registered after spi_master
2010-11-01 07:50:43 -04:00
Linus Walleij 65289d6345 spi/pl022: fix erroneous platform data in U300
This fixes an erroneous use of LSB first in the U300 machine, the
PL022 used in U300 is a standard ARM core that doesn't support this
bit so it should never have been set.

Cc: Kevin Wells <wellsk40@gmail.com>OA
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-11-01 01:01:08 -04:00
Kuninori Morimoto 2669efec08 ARM: mach-shmobile: ap4evb: Add HDMI sound support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31 10:43:14 -04:00
Kuninori Morimoto f2ace4a5d7 ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-31 10:40:45 -04:00
Linus Torvalds 79346507ad Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6: (82 commits)
  mtd: fix build error in m25p80.c
  mtd: Remove redundant mutex from mtd_blkdevs.c
  MTD: Fix wrong check register_blkdev return value
  Revert "mtd: cleanup Kconfig dependencies"
  mtd: cfi_cmdset_0002: make sector erase command variable
  mtd: cfi_cmdset_0002: add CFI detection for SST 38VF640x chips
  mtd: cfi_util: add support for switching SST 39VF640xB chips into QRY mode
  mtd: cfi_cmdset_0001: use defined value of P_ID_INTEL_PERFORMANCE instead of hardcoded one
  block2mtd: dubious assignment
  P4080/mtd: Fix the freescale lbc issue with 36bit mode
  P4080/eLBC: Make Freescale elbc interrupt common to elbc devices
  mtd: phram: use KBUILD_MODNAME
  mtd: OneNAND: S5PC110: Fix double call suspend & resume function
  mtd: nand: fix MTD_MODE_RAW writes
  jffs2: use kmemdup
  mtd: sm_ftl: cosmetic, use bool when possible
  mtd: r852: remove useless pci powerup/down from suspend/resume routines
  mtd: blktrans: fix a race vs kthread_stop
  mtd: blktrans: kill BKL
  mtd: allow to unload the mtdtrans module if its block devices aren't open
  ...

Fix up trivial whitespace-introduced conflict in drivers/mtd/mtdchar.c
2010-10-30 08:31:35 -07:00
Linus Torvalds 706d4b12f8 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (215 commits)
  ARM: memblock: setup lowmem mappings using memblock
  ARM: memblock: move meminfo into find_limits directly
  ARM: memblock: convert free_highpages() to use memblock
  ARM: move freeing of highmem pages out of mem_init()
  ARM: memblock: convert memory detail printing to use memblock
  ARM: memblock: use memblock to free memory into arm_bootmem_init()
  ARM: memblock: use memblock when initializing memory allocators
  ARM: ensure membank array is always sorted
  ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
  ARM: 6464/2: fix spinlock recursion in adjust_pte()
  ARM: fix memblock breakage
  ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
  ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
  ARM: 6449/1: Fix for compiler warning of uninitialized variable.
  ARM: 6445/1: fixup TCM memory types
  ARM: imx: Add wake functionality to GPIO
  ARM: mx5: Add gpio-keys to mx51 babbage board
  ARM: imx: Add gpio-keys to plat-mxc
  mx31_3ds: Fix spi registration
  mx31_3ds: Fix the logic for detecting the debug board
  ...
2010-10-30 08:26:25 -07:00
David Woodhouse 67577927e8 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
Conflicts:
	drivers/mtd/mtd_blkdevs.c

Merge Grant's device-tree bits so that we can apply the subsequent fixes.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-10-30 12:35:11 +01:00
Linus Torvalds c0f62edd40 Merge branches 'msm-fixes' and 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm
* 'msm-fixes' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm: Kconfig: drop unused config options
  msm: fix compile failure when no debug uart is selected
  msm: fix debug-macro.S build failure
  msm: timer: Decrease shift on timer clocksource
  arm: mach-msm: fix error handling in msm_iommu_probe()
  msm: fix Kconfig target board selection
  msm: fix compile failure on struct membank node member

* 'msm-video' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  drivers/video/msm/mddi.c: Remove multiple KERN_<level> uses
  drivers: msm: video: add dev_set_name call
  drivers: video: msm: fix hang on disable_irq
2010-10-29 18:57:04 -07:00
Linus Torvalds e4dd65496f Merge branch 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux
* 'for-2637/s3c24xx-all' of git://git.fluff.org/bjdooks/linux:
  ARM: h1940: add UDA1380 to i2c devices list
  ARM: h1940: Fix backlight and LCD power functions
  ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
  ARM: S3C2440: various fixes in Kconfig file
  ARM: rx1950: Add UDA1380 to i2c devices list
  ARM: rx1950: Add LEDs support
  ARM: rx1950: Add battery device
  ARM: h1940: Implement mmc_power function
  ARM: h1940: Use gpiolib for latch access
2010-10-29 16:49:34 -07:00
Ben Dooks d7b4e421a5 ARM: Merge for-2637/s3c24xx/misc 2010-10-30 00:46:55 +01:00
Ben Dooks 7c1552d196 ARM: Merge for-2637/s3c24xx/h1940 2010-10-30 00:46:49 +01:00
Ben Dooks 8f08bfd477 ARM: Merge for-2637/s3c24xx/rx1950 2010-10-30 00:46:34 +01:00
Vasily Khoruzhick 68730b451b ARM: h1940: add UDA1380 to i2c devices list
Register UDA1380 codec during H1940 machine init

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-30 00:45:35 +01:00
Vasily Khoruzhick 53193dd3ba ARM: h1940: Fix backlight and LCD power functions
Current implementation of LCD and backlight power control functions
is not complete, as result PDA consumes power in suspend.
Fix this issue by managing state of some latch bits, just like
WinMobile does.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-30 00:45:28 +01:00
Abdoulaye Walsimou Gaye bdf5005b73 ARM: S3C2440: fix boot failure introduced by recent changes in gpiolib
Recent changes in s3c gpio break mini2440 board and may be others.
The problem is that mach-mini2440.c: mini2440_init()
(where we call s3c_gpio_setpull()) is called before s3c2440.c: s3c2440_init()
(where we initialize s3c24xx_gpiocfg_default.set_pull function pointer).
This causes dereferencing of NULL pointer at boot time and a kernel panic.

Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-30 00:21:37 +01:00
Abdoulaye Walsimou Gaye e33ffd4d28 ARM: S3C2440: various fixes in Kconfig file
* kconfig symbols defined in arch/arm/mach-s3c2440/Kconfig are only available
  when ARCH_S3C2410 is selected, so no need to make some of them depend
  on ARCH_S3C2410.
* fix CPU_S3C24405B typo in "config S3C2440_DMA".
* mini2440: remove unconditionally select of SND_S3C24XX_SOC_S3C24XX_UDA134X.
Those fixes avoid the following warnings at make time:

scripts/kconfig/qconf arch/arm/Kconfig
warning: (MACH_MINI2440 && ARCH_S3C2410) selects SND_S3C24XX_SOC_S3C24XX_UDA134X
which has unmet direct dependencies (SND_S3C24XX_SOC && ARCH_S3C2410)
warning: (CPU_S3C2440 && ARCH_S3C2410 && S3C2410_DMA) selects S3C2440_DMA which
has unmet direct dependencies (ARCH_S3C2410 && CPU_S3C24405B)
warning: (CPU_S3C2440 && ARCH_S3C2410 || CPU_S3C2442 && ARCH_S3C2410)
selects CPU_S3C244X which has unmet direct dependencies (!ARCH_S3C2410)

Signed-off-by: Abdoulaye Walsimou Gaye <awg@embtoolkit.org>

Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-10-30 00:21:28 +01:00
Daniel Walker 4ee7a6c2d1 msm: Kconfig: drop unused config options
These two config options don't exist, and aren't ever going to.
So I simply delete them.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:17 -07:00
Daniel Walker 06125ff051 msm: fix compile failure when no debug uart is selected
If the board has a debug uart the user is given a choice of which
uart to use. The user can also select NONE, which means not to use one.
In most of our header files when NONE is selected nothing is defined
for MSM_DEBUG_UART_PHYS or MSM_DEBUG_UART_BASE. This causes a compile
failure in debug-macro.S which expect something to be defined there.

Example of the failure,

arch/arm/kernel/built-in.o: In function `hexbuf':
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_PHYS'
linux-2.6/arch/arm/kernel/debug.S:186: undefined reference to `MSM_DEBUG_UART_BASE'

This fixes the compile failure by adding an ifdef to debug-macro.S
that removes all the debug uart code in the case of NONE.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:16 -07:00
Daniel Walker bcd72c3e0a msm: fix debug-macro.S build failure
Originally there was an ifdef case to handle when no debug uart
was selected. In commit 0ea1293009
that case was removed which causes the following build failure,

linux-2.6/arch/arm/kernel/debug.S: Assembler messages:
linux-2.6/arch/arm/kernel/debug.S:174: Error: bad instruction `addruart r1,r2'
linux-2.6/arch/arm/kernel/debug.S:176: Error: bad instruction `waituart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:177: Error: bad instruction `senduart r1,r3'
linux-2.6/arch/arm/kernel/debug.S:178: Error: bad instruction `busyuart r2,r3'
linux-2.6/arch/arm/kernel/debug.S:190: Error: bad instruction `addruart r1,r2'

This is a partial revert to add back the case which was removed with
two caveats. First the API for the addruart macro was updated, and
the new addruart case now return 0xfff00000 so that a know IO mapping
is created instead of a random one.

Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jason Wang <jason77.wang@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-29 15:56:04 -07:00
Linus Torvalds 1e431a9d64 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb,ppc: Individual register get/set for ppc
  kgdbts: prevent re-entry to kgdbts before it unregisters
  debug_core,x86,blackfin: Clean up hw debug disable API
  kdb: Fix early debugging crash regression
  kgdb,arm: fix register dump
  kdb: fix per_cpu command to remove supress mask
  kdb: Add kdb kernel module sample
2010-10-29 11:49:38 -07:00
Rabin Vincent 834b2964b7 kgdb,arm: fix register dump
DBG_MAX_REG_NUM incorrectly had the number of indices in the GDB regs
array rather than the number of registers, leading to an oops when the
"rd" command is used in KDB.

Cc: stable@kernel.org
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-10-29 13:14:40 -05:00
Linus Torvalds 51399a3919 Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
  kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
  README: cite nconfig
  Revert "kconfig: Temporarily disable dependency warnings"
  kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
  kconfig: Fix realloc usage()
  kconfig: Propagate const
  kconfig: Don't go out from read config loop when you read new symbol
  kconfig: fix menuconfig on debian lenny
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  ...

Fix up trivial conflict in arch/mn10300/Kconfig
2010-10-28 16:16:39 -07:00
Menon, Nishanth bf56f0a666 omap4: pandaboard: fix up mmc card detect logic
For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030. This functionality was introduced in mfd tree on
track to kernel.org

Sync pandaboard to the same and make mmc work.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>

Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Tested-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:30:32 +02:00
Mark Brown e5b486841d mfd: Factor out WM831x I2C I/O from the core driver
In preparation for the addition of SPI support for the WM831x move the I2C
specific code into a separate file with a separate Kconfig option so the
I2C support can be excluded from the build.

Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new
symbol.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:30:24 +02:00
kishore kadiyala 72f2e2c763 mfd: Adding twl6030 mmc card detect support for MMC1
Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.

Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.

For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.

Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 &
OMAP4.

Cc: Tony Lindgren <tony@atomide.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Madhusudhan Chikkature <madhu.cr@ti.com>
Cc: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:59 +02:00
Arnd Hannemann 68accd7370 ARM: mach-shmobile: ap4evb: Fix hotplug for SDHI1
On AP4EVB the card detect pin of the top SD/MMC slot is not directly
connected to the tmio/mmcif controller but to a GPIO pin, so polling
needs to be done for SDHI1 and MMCIF in order to support hotplug for
that slot. SHDI1 and MMCIF share that slot, and the used controller
is selected by a DIP switch.
This patch adds a helper function to check if a card is present in that
particular slot, registers this function with SDHI1 and MMCIF and enables
polling for SDHI1.

Signed-off-by: Arnd Hannemann <arnd@arndnet.de>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:29:14 +02:00
Russell King 9bafc74163 Merge branch 'devel-stable' into devel 2010-10-28 20:39:13 +01:00
Russell King b3773301c4 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/genesis-2.6 into devel-stable
Conflicts:
	drivers/video/sh_mobile_hdmi.c
2010-10-28 20:14:38 +01:00
Linus Torvalds f063a0c0c9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (841 commits)
  Staging: brcm80211: fix usage of roundup in structures
  Staging: bcm: fix up network device reference counting
  Staging: keucr: fix up US_ macro change
  staging: brcm80211: brcmfmac: Removed codeversion from firmware filenames.
  staging: brcm80211: Remove unnecessary header files.
  staging: brcm80211: Remove unnecessary includes from bcmutils.c
  staging: brcm80211: Removed unnecessary pktsetprio() function.
  Staging: brcm80211: remove typedefs.h
  Staging: brcm80211: remove uintptr typedef usage
  Staging: hv: remove struct vmbus_channel_interface
  Staging: hv: remove Open from struct vmbus_channel_interface
  Staging: hv: storvsc: call vmbus_open directly
  Staging: hv: netvsc: call vmbus_open directly
  Staging: hv: channel: export vmbus_open to modules
  Staging: hv: remove Close from struct vmbus_channel_interface
  Staging: hv: netvsc: call vmbus_close directly
  Staging: hv: storvsc: call vmbus_close directly
  Staging: hv: channel: export vmbus_close to modules
  Staging: hv: remove SendPacket from struct vmbus_channel_interface
  Staging: hv: storvsc: call vmbus_sendpacket directly
  ...

Fix up conflicts in
	drivers/staging/cx25821/cx25821-audio-upstream.c
	drivers/staging/cx25821/cx25821-audio.h
due to warring whitespace cleanups (neither of which were all that great)
2010-10-28 12:13:00 -07:00
Greg Kroah-Hartman e4c5bf8e3d Merge 'staging-next' to Linus's tree
This merges the staging-next tree to Linus's tree and resolves
some conflicts that were present due to changes in other trees that were
affected by files here.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-28 09:44:56 -07:00
Linus Torvalds 0851668fdd Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits)
  [media] af9015: Fix max I2C message size when used with tda18271
  [media] IR: initialize ir_raw_event in few more drivers
  [media] Guard a divide in v4l1 compat layer
  [media] imon: fix nomouse modprobe option
  [media] imon: remove redundant change_protocol call
  [media] imon: fix my egregious brown paper bag w/rdev/idev split
  [media] cafe_ccic: Configure ov7670 correctly
  [media] ov7670: allow configuration of image size, clock speed, and I/O method
  [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016]
  [media] af9015: map DigitalNow TinyTwin v2 remote
  [media] DigitalNow TinyTwin remote controller
  [media] af9015: RC fixes and improvements
  videodev2.h.xml: Update to reflect the latest changes at videodev2.h
  [media] v4l: document new Bayer and monochrome pixel formats
  [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028
  [media] firedtv: add parameter to fake ca_system_ids in CA_INFO
  [media] tm6000: fix a macro coding style issue
  tm6000: Remove some ugly debug code
  [media] Nova-S-Plus audio line input
  [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers
  ...
2010-10-28 09:35:11 -07:00
Linus Torvalds 00ebb6382b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits)
  mmc: add new sdhci-pxa driver for Marvell SoCs
  mmc: make number of mmcblk minors configurable
  mmc_spi: Recover from CRC errors for r/w operation over SPI.
  mmc: sdhci-pltfm: add -pltfm driver for imx35/51
  mmc: sdhci-of-esdhc: factor out common stuff
  mmc: sdhci_pltfm: pass more data on custom init call
  mmc: sdhci: introduce get_ro private write-protect hook
  mmc: sdhci-pltfm: move .h file into appropriate subdir
  mmc: sdhci-pltfm: Add structure for host-specific data
  mmc: fix cb710 kconfig dependency warning
  mmc: cb710: remove debugging printk (info duplicated from mmc-core)
  mmc: cb710: clear irq handler on init() error path
  mmc: cb710: remove unnecessary msleep()
  mmc: cb710: implement get_cd() callback
  mmc: cb710: partially demystify clock selection
  mmc: add a file to debugfs for changing host clock at runtime
  mmc: sdhci: allow for eMMC 74 clock generation by controller
  mmc: sdhci: highspeed: check for mmc as well as sd cards
  mmc: sdhci: Add Moorestown device support
  mmc: sdhci: Intel Medfield support
  ...
2010-10-28 09:33:42 -07:00
Russell King be6786ac73 Merge branch 'l2x0-pull-rmk' of git://dev.omapzoom.org/pub/scm/santosh/kernel-omap4-base into devel-stable 2010-10-28 14:42:06 +01:00
Russell King 8df6516864 ARM: memblock: setup lowmem mappings using memblock
Use memblock information to setup lowmem mappings rather than the
membank array.

This allows platforms to manipulate the memblock information during
initialization to reserve (and remove) memory from the kernel's view
of memory - and thus allowing platforms to setup their own private
mappings for this memory without causing problems with multiple
aliasing mappings:

	size = min(size, SZ_2M);
	base = memblock_alloc(size, min(align, SZ_2M));
	memblock_free(base, size);
	memblock_remove(base, size);

This is needed because multiple mappings of regions with differing
attributes (sharability, type, cache) are not permitted with ARMv6
and above.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:45 +01:00
Russell King f25b4b4c89 ARM: memblock: move meminfo into find_limits directly
bootmem_init() no longer makes several uses of the membank
information, so move this into the one remaining called function
which does use it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:44 +01:00
Russell King df4f14c7b2 ARM: memblock: convert free_highpages() to use memblock
Free the high pages using the memblock memory lists - and more
importantly, exclude any memblock allocations in highmem from the
free'd memory.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:44 +01:00
Russell King d0e775afb9 ARM: move freeing of highmem pages out of mem_init()
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:43 +01:00
Russell King 47ea3c1549 ARM: memblock: convert memory detail printing to use memblock
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:43 +01:00
Russell King a801d27640 ARM: memblock: use memblock to free memory into arm_bootmem_init()
Switch arm_bootmem_init() to use memblock instead of membank to
free memory into bootmem.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:43 +01:00
Russell King a2c54d2af8 ARM: memblock: use memblock when initializing memory allocators
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:42 +01:00
Russell King 7dc50ec728 ARM: ensure membank array is always sorted
This was missing from the noMMU code, so there was the possibility
of things not working as expected if out of order memory information
was passed.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:41 +01:00
Mika Westerberg c8c90860cd ARM: 6466/1: implement flush_icache_all for the rest of the CPUs
Commit 81d11955bf ("ARM: 6405/1: Handle __flush_icache_all for
CONFIG_SMP_ON_UP") added a new function to struct cpu_cache_fns:
flush_icache_all(). It also implemented this for v6 and v7 but not
for v5 and backwards. Without the function pointer in place, we
will be calling wrong cache functions.

For example with ep93xx we get following:

    Unable to handle kernel paging request at virtual address ee070f38
    pgd = c0004000
    [ee070f38] *pgd=00000000
    Internal error: Oops: 80000005 [#1] PREEMPT
    last sysfs file:
    Modules linked in:
    CPU: 0    Not tainted  (2.6.36+ #1)
    PC is at 0xee070f38
    LR is at __dma_alloc+0x11c/0x2d0
    pc : [<ee070f38>]    lr : [<c0032c8c>]    psr: 60000013
    sp : c581bde0  ip : 00000000  fp : c0472000
    r10: c0472000  r9 : 000000d0  r8 : 00020000
    r7 : 0001ffff  r6 : 00000000  r5 : c0472400  r4 : c5980000
    r3 : c03ab7e0  r2 : 00000000  r1 : c59a0000  r0 : c5980000
    Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: c000717f  Table: c0004000  DAC: 00000017
    Process swapper (pid: 1, stack limit = 0xc581a270)
    [<c0032c8c>] (__dma_alloc+0x11c/0x2d0)
    [<c0032e5c>] (dma_alloc_writecombine+0x1c/0x24)
    [<c0204148>] (ep93xx_pcm_preallocate_dma_buffer+0x44/0x60)
    [<c02041c0>] (ep93xx_pcm_new+0x5c/0x88)
    [<c01ff188>] (snd_soc_instantiate_cards+0x8a8/0xbc0)
    [<c01ff59c>] (soc_probe+0xfc/0x134)
    [<c01adafc>] (platform_drv_probe+0x18/0x1c)
    [<c01acca4>] (driver_probe_device+0xb0/0x16c)
    [<c01ac284>] (bus_for_each_drv+0x48/0x84)
    [<c01ace90>] (device_attach+0x50/0x68)
    [<c01ac0f8>] (bus_probe_device+0x24/0x44)
    [<c01aad7c>] (device_add+0x2fc/0x44c)
    [<c01adfa8>] (platform_device_add+0x104/0x15c)
    [<c0015eb8>] (simone_init+0x60/0x94)
    [<c0021410>] (do_one_initcall+0xd0/0x1a4)

__dma_alloc() calls (inlined) __dma_alloc_buffer() which ends up
calling dmac_flush_range(). Now since the entries in the
arm920_cache_fns are shifted by one, we jump into address 0xee070f38
which is actually next instruction after the arm920_cache_fns
structure.

So implement flush_icache_all() for the rest of the supported CPUs
using a generic 'invalidate I cache' instruction.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:54:28 +01:00
Mika Westerberg 4e54d93d3c ARM: 6464/2: fix spinlock recursion in adjust_pte()
When running following code in a machine which has VIVT caches and
USE_SPLIT_PTLOCKS is not defined:

  fd = open("/etc/passwd", O_RDONLY);
  addr = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd, 0);
  addr2 = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd, 0);

  v = *((int *)addr);

we will hang in spinlock recursion in the page fault handler:

  BUG: spinlock recursion on CPU#0, mmap_test/717
  lock: c5e295d8, .magic: dead4ead, .owner: mmap_test/717,
                  .owner_cpu: 0
  [<c0026604>] (unwind_backtrace+0x0/0xec)
  [<c014ee48>] (do_raw_spin_lock+0x40/0x140)
  [<c0027f68>] (update_mmu_cache+0x208/0x250)
  [<c0079db4>] (__do_fault+0x320/0x3ec)
  [<c007af7c>] (handle_mm_fault+0x2f0/0x6d8)
  [<c0027834>] (do_page_fault+0xdc/0x1cc)
  [<c00202d0>] (do_DataAbort+0x34/0x94)

This comes from the fact that when USE_SPLIT_PTLOCKS is not defined,
the only lock protecting the page tables is mm->page_table_lock
which is already locked before update_mmu_cache() is called.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-28 13:53:47 +01:00
Russell King f9cef50681 Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable
Conflicts:
	arch/arm/mach-s3c64xx/dev-audio.c
2010-10-28 12:27:34 +01:00
Russell King 9ae21ca362 Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 2010-10-28 11:13:00 +01:00
Linus Torvalds e3e1288e86 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (48 commits)
  DMAENGINE: move COH901318 to arch_initcall
  dma: imx-dma: fix signedness bug
  dma/timberdale: simplify conditional
  ste_dma40: remove channel_type
  ste_dma40: remove enum for endianess
  ste_dma40: remove TIM_FOR_LINK option
  ste_dma40: move mode_opt to separate config
  ste_dma40: move channel mode to a separate field
  ste_dma40: move priority to separate field
  ste_dma40: add variable to indicate valid dma_cfg
  async_tx: make async_tx channel switching opt-in
  move async raid6 test to lib/Kconfig.debug
  dmaengine: Add Freescale i.MX1/21/27 DMA driver
  intel_mid_dma: change the slave interface
  intel_mid_dma: fix the WARN_ONs
  intel_mid_dma: Add sg list support to DMA driver
  intel_mid_dma: Allow DMAC2 to share interrupt
  intel_mid_dma: Allow IRQ sharing
  intel_mid_dma: Add runtime PM support
  DMAENGINE: define a dummy filter function for ste_dma40
  ...
2010-10-27 19:04:36 -07:00
Zimny Lech 61d8e11e51 Remove duplicate includes from many files
Signed-off-by: Zimny Lech <napohybelskurwysynom2010@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:18 -07:00
Namhyung Kim b640a0d192 ptrace: cleanup arch_ptrace() on ARM
use new 'datap' variable in order to remove unnecessary castings.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Namhyung Kim 9b05a69e05 ptrace: change signature of arch_ptrace()
Fix up the arguments to arch_ptrace() to take account of the fact that
@addr and @data are now unsigned long rather than long as of a preceding
patch in this series.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:10 -07:00
Peter Zijlstra 20273941f2 mm: fix race in kunmap_atomic()
Christoph reported a nice splat which illustrated a race in the new stack
based kmap_atomic implementation.

The problem is that we pop our stack slot before we're completely done
resetting its state -- in particular clearing the PTE (sometimes that's
CONFIG_DEBUG_HIGHMEM).  If an interrupt happens before we actually clear
the PTE used for the last slot, that interrupt can reuse the slot in a
dirty state, which triggers a BUG in kmap_atomic().

Fix this by introducing kmap_atomic_idx() which reports the current slot
index without actually releasing it and use that to find the PTE and delay
the _pop() until after we're completely done.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reported-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:05 -07:00
Jeff Ohlstein 6f9419619e msm: timer: Decrease shift on timer clocksource
The shift of 24 causes the shift and multiply operation to sometimes
overflow, resulting in incorrect timer values and poor performance.

Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:02 -07:00
Vasiliy Kulikov a86c44d48a arm: mach-msm: fix error handling in msm_iommu_probe()
msm_iommu_probe() didn't free mem_region and mapped IO.
Also if request_mem_region() failed then error handling
code dereferenced NULL pointer.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Acked-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:02 -07:00
Daniel Walker efdfb2b118 msm: fix Kconfig target board selection
This prevents build failures since it's currently possible to select
8x50, 7x30, or 7x00 without selecting a specific board. These changes
just force a target selection, which is currently defaulting to the most
common one (7x30 only has one).

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:01 -07:00
Daniel Walker 79d98313e0 msm: fix compile failure on struct membank node member
In commit be37030274
"ARM: Remove DISCONTIGMEM support", it removed this "node" member
which cased the following compile failure in mach-msm,

linux/arch/arm/mach-msm/board-halibut.c: In function 'halibut_fixup':
linux/arch/arm/mach-msm/board-halibut.c:86: error: 'struct membank' has no member named 'node'
linux/arch/arm/mach-msm/board-halibut.c:86: error: implicit declaration of function 'PHYS_TO_NID'

I've removed the access to the node member which corrects the
compile failure.

Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-10-27 14:24:01 -07:00
Russell King 4e929d2bcf ARM: fix memblock breakage
Will says:
| Commit e63075a3 removed the explicit MEMBLOCK_REAL_LIMIT #define
| and introduced the requirement that arch code calls
| memblock_set_current_limit to ensure that the __va macro can
| be used on physical addresses returned from memblock_alloc.

Unfortunately, ARM was missed out of this change.  Fix this.

Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27 21:41:39 +01:00
Tony Lindgren 88d927e948 ARM: 6465/1: Fix data abort accessing proc_info from __lookup_processor_type
Commit 5085f3ff45 added better support for
CONFIG_HOTPLUG_CPU by keeping proc_info around. However, depending on
the Kconfig options selected, this can make the booting fail mysteriously
early on.

Turns out a data abort can happen in __lookup_processor in ldmia r5 {r3, r4}.
When it happens the address loaded to r5 is not aligned. Fix the problem by
aligning proc_info.

Reported-by: Anand Gadiyar <gadiyar@ti.com>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27 21:40:29 +01:00
Uwe Kleine-König d463f3633d ARM: 6460/1: ixp2000: fix type of ixp2000_timer_interrupt
This fixes a build warning existing since at least 2.6.30:

	arch/arm/mach-ixp2000/core.c:217: warning: initialization from incompatible pointer type

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27 21:40:28 +01:00
Marcelo Roberto Jimenez 521e9549d5 ARM: 6449/1: Fix for compiler warning of uninitialized variable.
ARM: mach-sa1100: Fix for compiler warning of uninitialized variable.

This is a fix for the compiler warning: 'new_ppcr' may be used
uninitialized in this function.

Signed-off-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27 21:40:28 +01:00
Linus Walleij f444fce3c0 ARM: 6445/1: fixup TCM memory types
After Santosh's fixup of the generic MT_MEMORY and
MT_MEMORY_NONCACHED I add this fix to the TCM memory types.
The main change is that the ITCM memory is L_PTE_WRITE and
DOMAIN_KERNEL which works just fine. The changed to the DTCM
is just cosmetic to fit with surrounding code.

Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Rickard Andersson <rickard.andersson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-27 21:40:27 +01:00
Hagen Paul Pfeifer 732eacc054 replace nested max/min macros with {max,min}3 macro
Use the new {max,min}3 macros to save some cycles and bytes on the stack.
This patch substitutes trivial nested macros with their counterpart.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Cc: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:12 -07:00
Peter Zijlstra ece0e2b640 mm: remove pte_*map_nested()
Since we no longer need to provide KM_type, the whole pte_*map_nested()
API is now redundant, remove it.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Peter Zijlstra 3e4d3af501 mm: stack based kmap_atomic()
Keep the current interface but ignore the KM_type and use a stack based
approach.

The advantage is that we get rid of crappy code like:

	#define __KM_PTE			\
		(in_nmi() ? KM_NMI_PTE : 	\
		 in_irq() ? KM_IRQ_PTE :	\
		 KM_PTE0)

and in general can stop worrying about what context we're in and what kmap
slots might be appropriate for that.

The downside is that FRV kmap_atomic() gets more expensive.

For now we use a CPP trick suggested by Andrew:

  #define kmap_atomic(page, args...) __kmap_atomic(page)

to avoid having to touch all kmap_atomic() users in a single patch.

[ not compiled on:
  - mn10300: the arch doesn't actually build with highmem to begin with ]

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix up drivers/gpu/drm/i915/intel_overlay.c]
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:08 -07:00
Linus Torvalds 45352bbf48 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver
2010-10-26 10:14:23 -07:00
Linus Torvalds f99d055398 Merge branch 'for_linus' of git://github.com/at91linux/linux-2.6-at91
* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
  AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
  at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
  AT91: pm: make sure that r0 is 0 when dealing with cache operations
  AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
  AT91: reset: extend alternate reset procedure to several chips
  AT91: reset routine cleanup, remove not needed icache flush
  AT91: trivial: align comment of at91sam9g20_reset with one more tab
  AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
  AT91: add board support for Pcontrol_G20
2010-10-26 10:03:40 -07:00
Linus Torvalds 2c518959f0 Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: DSS2: don't power off a panel twice
  OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3
  OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3
  OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB
  arm/omap: simplify conditional
  OMAP: DSS2: DSI: Remove extra iounmap in error path
  OMAP: DSS2: Use dss_features framework on DSS2 code
  OMAP: DSS2: Introduce dss_features files
  video/omap: remove mux.h include
  ARM: omap/fb: move get_fbmem_region() to .init.text
  ARM: omap/fb: move omapfb_reserve_sram to .init.text
  ARM: omap/fb: move omap_init_fb to .init.text
  OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
  OMAP: DSS2: make filter coefficient tables human readable
  OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel
2010-10-26 10:02:39 -07:00
Dinh Nguyen a3484ffd2a ARM: imx: Add wake functionality to GPIO
Add function definition for irq_chip.set_wake to enable GPIO to
wake-up the system.

This patch has been tested on a MX51 Babbage system that had suspend
code implemented. The set_wake implementation is necessary for a
GPIO to wake up a system from suspend.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:24:06 +02:00
Dinh Nguyen f2d36ecbca ARM: mx5: Add gpio-keys to mx51 babbage board
Add functionality for the power button on MX51 Babbage board.

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:24:05 +02:00
Dinh Nguyen 47c5382287 ARM: imx: Add gpio-keys to plat-mxc
Add imx_add_gpio_keys function to add gpio-keys in plat-mxc

Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:24:04 +02:00
Rogerio Pimentel 4a74bddcc5 mx31_3ds: Fix spi registration
Commit (06606ff13) "ARM: imx: dynamically register spi_imx devices
(imx31)" registered the wrong SPI port for mx31_3ds board.
mx31_3ds uses SPI2 to connect to the MC13783 PMIC.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:23:06 +02:00
Rogerio Pimentel b8be7b9a6d mx31_3ds: Fix the logic for detecting the debug board
The function mxc_expio_init returns 0 on success, so fix the logic for
printing the error case.
Also fixed the wording on the error message.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 16:11:06 +02:00
Nicolas Ferre 75305d768d at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:49 +02:00
Nicolas Ferre a2a571b74a AT91: pm: make sure that r0 is 0 when dealing with cache operations
When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre 8aeeda822f AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
For power management at91_pm_enter() routine, use the cpu_do_idle() for a
rock solid "wait for interrupt" implementation.
For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as
we can access RAM even while in self-refresh mode.
We keep plain access to CP15 for at91rm9200 as this feature is not
available: instructions have to be in a single cache line.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre bb413db591 AT91: reset: extend alternate reset procedure to several chips
Several at91sam9 chips need the alternate reset procedure to be sure to halt
SDRAM smoothly before resetting the chip.
This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips
affected.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre 1345562b44 AT91: reset routine cleanup, remove not needed icache flush
Generalize assembler reset routine to allow use on several at91sam9 chips.
This patch replace double definitions of SDRAM controller registers and RSTC
registers with use of classical header files.

For this rework, we remove the not needed icache flush as it is already
done in the calling function: arm_machine_restart().

Rename at91sam9g20_reset.S to generalize to several chips.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:48 +02:00
Nicolas Ferre ef4d63e6f5 AT91: trivial: align comment of at91sam9g20_reset with one more tab
Preparing next patch with longer names

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Peter Horton 184c82e853 AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Peter Gsellmann abf0c1bc94 AT91: add board support for Pcontrol_G20
Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system

Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-26 11:32:47 +02:00
Per Fransson ae6948048c ARM: ux500 specific L2 cache code
The generic version of l2x0_inv_all is only called just after disabling
the L2 cache and is surrounded by a spinlock. However, we're not really
turning off the L2 cache right now, and the PL310 does not support
exclusive accesses (used to implement the spinlock). So, the
invalidation needs to be done without the spinlock.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Hans-Juergen Koch <hjk@linutronix.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:06 +05:30
Santosh Shilimkar 444457c1f5 ARM: l2x0: Optimise the range based operations
For the big buffers which are in excess of cache size, the maintaince
operations by PA are very slow. For such buffers the maintainace
operations can be speeded up by using the WAY based method.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:05 +05:30
Santosh Shilimkar 5ba7037228 ARM: l2x0: Determine the cache size
The cache size is needed for to optimise range based
maintainance operations

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:03 +05:30
Santosh Shilimkar 7db27e864a ARM: l2x0: Fix coding-style in the cache-l2x0.h
Replace tab with space after #define to be consisten with other
define in the file. Also move the bit mask below the register offsets.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:02 +05:30
Santosh Shilimkar 4e803c40b3 omap4: l2x0: Override the default l2x0_disable
The machine_kexec() calls outer_disable which can crash on OMAP4
becasue of trustzone restrictions.

This patch overrides the default l2x0_disable with a OMAP4
specific implementation taking care of trustzone

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:40:00 +05:30
Thomas Gleixner 2fd8658931 arm: Implement l2x0 cache disable functions
Add flush_all, inv_all and disable functions to the l2x0 code. These
functions are called from kexec code to prevent random crashes in the
new kernel.

Platforms like OMAP which control L2 enable/disable via SMI mode can
override the outer_cache.disable() function to implement their own.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:39:58 +05:30
Thomas Gleixner ae360a78f4 arm: Disable outer (L2) cache in kexec
kexec does not disable the outer cache before disabling the inner
caches in cpu_proc_fin(). So L2 is enabled across the kexec jump. When
the new kernel enables chaches again, it randomly crashes.

Disabling L2 before calling cpu_proc_fin() cures the problem.

Disabling L2 requires the following new functions: flush_all(),
inv_all() and disable(). Add them to outer_cache_fns and call them
from the kexec code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
2010-10-26 11:39:56 +05:30
Catalin Marinas 9a6655e49f ARM: Improve the L2 cache performance when PL310 is used
With this L2 cache controller, the cache maintenance by PA and sync
operations are atomic and do not require a "wait" loop. This patch
conditionally defines the cache_wait() function.

Since L2x0 cache controllers do not work with ARMv7 CPUs, the patch
automatically enables CACHE_PL310 when only CPU_V7 is defined.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2010-10-26 11:39:54 +05:30
Daein Moon cbff3eb3e6 ARM: S5PV310: Support ethernet for SMDKV310 and SMDKC210
This patch adds to support ethernet for SMDKV310 and SMDKC210 board.
  - define smc911x resources
  - define configurations of smc911x platform data
  - define platform device "smsc911x"
  - initialize srom controller for lan9215 chip

Signed-off-by: Daein Moon <moon9124@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-26 12:51:17 +09:00
Rogerio Pimentel 1e9aed156b mx31_3ds: Remove unused debug board definitions
In commit (c5d38f08): "mx31_3ds: revert 3ds debug board relate code"
the debug board definitions are placed in a separate file.

Remove the remaining debug board related define from mach-mx31_3ds.c.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Rogerio Pimentel <rogerio.pimentel@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-26 04:40:38 +02:00
Linus Torvalds b18cae4224 Merge branch 'for-next' of git://android.git.kernel.org/kernel/tegra
* 'for-next' of git://android.git.kernel.org/kernel/tegra:
  spi: tegra: fix error setting on timeout
  spi: add spi_tegra driver
  tegra: harmony: enable PCI Express
  tegra: add PCI Express support
  tegra: add PCI Express clocks
  [ARM] tegra: Add APB DMA support
  [ARM] tegra: Add cpufreq support
  [ARM] tegra: common: Update common clock init table
  [ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
  [ARM] tegra: Add support for reading fuses
  [ARM] tegra: gpio: Add suspend and wake support
  [ARM] tegra: pinmux: add safe values, move tegra2, add suspend
  [ARM] tegra: add suspend and mirror irqs to legacy controller
  [ARM] tegra: Add legacy irq support
  [ARM] tegra: update iomap
2010-10-25 18:42:06 -07:00
Daein Moon 09596ba07e ARM: S5PV310: Add support SROMC
This patch adds support SROMC for S5PV310 and S5PC210.

Signed-off-by: Daein Moon <moon9124@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-26 08:40:12 +09:00
Daein Moon a6149c09c9 ARM: SAMSUNG: Add the missed s3c_gpio_getpull() API
This patch adds the s3c_gpio_getpull() API that has been missed in the
plat-samsung/gpio-config.c and actullay there is its extern declaration
in plat/gpio-cfg.h.

Signed-off-by: Daein Moon <moon9124@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-26 08:40:08 +09:00
Linus Torvalds b20f9e5bdd Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
  hwmon: lis3: Release resources in case of failure
  hwmon: lis3: Short explanations of platform data fields
  hwmon: lis3: Enhance lis3 selftest with IRQ line test
  hwmon: lis3: use block read to access data registers
  hwmon: lis3: Adjust fuzziness for 8 bit device
  hwmon: lis3: New parameters to platform data
  hwmon: lis3: restore axis enabled bits
  hwmon: lis3: Power on corrections
  hwmon: lis3: Update coordinates at polled device open
  hwmon: lis3: Cleanup interrupt handling
  hwmon: lis3: regulator control
  hwmon: lis3: pm_runtime support
  Kirkwood: add fan support for Network Space Max v2
  hwmon: add generic GPIO fan driver
  hwmon: (coretemp) fix reading of microcode revision (v2)
  hwmon: ({core, pkg, via-cpu}temp) remove unnecessary CONFIG_HOTPLUG_CPU ifdefs
  hwmon: (pkgtemp) align driver initialization style with coretemp
  hwmon: LTC4261 Hardware monitoring driver
  hwmon: (lis3) add axes module parameter for custom axis-mapping
  hwmon: (hp_accel) Add HP Mini 510x family support
  ...
2010-10-25 16:25:31 -07:00
Simon Guinot 0ab83a7ce5 Kirkwood: add fan support for Network Space Max v2
Signed-off-by: Simon Guinot <sguinot@lacie.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-10-25 14:11:37 -07:00
Linus Torvalds 7b6181e068 Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony
2010-10-25 13:46:56 -07:00
Linus Torvalds 72e58063d6 Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci
* 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (50 commits)
  davinci: fix remaining board support after io_pgoffst removal
  davinci: mityomapl138: make file local data static
  arm/davinci: remove duplicated include
  davinci: Initial support for Omapl138-Hawkboard
  davinci: MityDSP-L138/MityARM-1808 read MAC address from I2C Prom
  davinci: add tnetv107x touchscreen platform device
  input: add driver for tnetv107x touchscreen controller
  davinci: add keypad config for tnetv107x evm board
  davinci: add tnetv107x keypad platform device
  input: add driver for tnetv107x on-chip keypad controller
  net: davinci_emac: cleanup unused cpdma code
  net: davinci_emac: switch to new cpdma layer
  net: davinci_emac: separate out cpdma code
  net: davinci_emac: cleanup unused mdio emac code
  omap: cleanup unused davinci mdio arch code
  davinci: cleanup mdio arch code and switch to phy_id
  net: davinci_emac: switch to new mdio
  omap: add mdio platform devices
  davinci: add mdio platform devices
  net: davinci_emac: separate out davinci mdio
  ...

Fix up trivial conflict in drivers/input/keyboard/Kconfig (two entries
added next to each other - one from the davinci merge, one from the
input merge)
2010-10-25 10:59:31 -07:00
Linus Torvalds 33081adf8b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits)
  ALSA: hda - Disable sticky PCM stream assignment for AD codecs
  ALSA: usb - Creative USB X-Fi volume knob support
  ALSA: ca0106: Use card specific dac id for mute controls.
  ALSA: ca0106: Allow different sound cards to use different SPI channel mappings.
  ALSA: ca0106: Create a nice spot for mapping channels to dacs.
  ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence.
  ALSA: ca0106: Pull out dac powering routine into separate function.
  ALSA: ca0106 - add Sound Blaster 5.1vx info.
  ASoC: tlv320dac33: Use usleep_range for delays
  ALSA: usb-audio: add Novation Launchpad support
  ALSA: hda - Add workarounds for CT-IBG controllers
  ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs
  ASoC: tpa6130a2: Error handling for broken chip
  ASoC: max98088: Staticise m98088_eq_band
  ASoC: soc-core: Fix codec->name memory leak
  ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066
  ALSA: hda - Add some workarounds for Creative IBG
  ALSA: hda - Fix wrong SPDIF NID assignment for CA0110
  ALSA: hda - Fix codec rename rules for ALC662-compatible codecs
  ALSA: hda - Add alc_init_jacks() call to other codecs
  ...
2010-10-25 08:32:05 -07:00
Linus Torvalds 3a99c63190 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits)
  Input: wacom - specify Cinitq supported tools
  Input: ab8500-ponkey - fix IRQ freeing in error path
  Input: adp5588-keys - use more obvious i2c_device_id name string
  Input: ad7877 - switch to using threaded IRQ
  Input: ad7877 - use attribute group to control visibility of attributes
  Input: serio - add support for PS2Mult multiplexer protocol
  Input: wacom - properly enable runtime PM
  Input: ad7877 - filter events where pressure is beyond the maximum
  Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting
  Input: ad7877 - implement specified chip select behavior
  Input: hp680_ts_input - use cancel_delayed_work_sync()
  Input: mousedev - correct lockdep annotation
  Input: ads7846 - switch to using threaded IRQ
  Input: serio - support multiple child devices per single parent
  Input: synaptics - simplify pass-through port handling
  Input: add ROHM BU21013 touch panel controller support
  Input: omap4-keypad - wake-up on events & long presses
  Input: omap4-keypad - fix interrupt line configuration
  Input: omap4-keypad - SYSCONFIG register configuration
  Input: omap4-keypad - use platform device helpers
  ...
2010-10-25 07:59:01 -07:00
Takashi Iwai aa5c14d5c0 Merge branch 'topic/asoc' into for-linus
Conflicts:
	arch/powerpc/platforms/85xx/p1022_ds.c
2010-10-25 10:00:30 +02:00
Kukjin Kim d07dc60c6c ARM: S5P: Change VMALLOC_END to use more vmalloc()/ioremap() area
This patch changes VMALLOC_END from 0xE0000000 to 0xF6000000, because
some systems want to use more vmalloc()/ioremap() area and now don't use
from at 0xE0000000 to 0xF6000000 (the start of Samsung SoCs' VA space)

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:50 +09:00
Kukjin Kim cd1cc8282d ARM: S3C: Change VMALLOC_END to use more vmalloc()/ioremap() area
This patch changes VMALLOC_END from 0xE0000000 to 0xF6000000, because
some systems want to use more vmalloc()/ioremap() area and now don't use
from at 0xE0000000 to 0xF6000000 (the start of Samsung SoCs' VA space)

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:44 +09:00
Kukjin Kim fb57d84af0 ARM: SAMSUNG: Move the start address of Samsung SoCs' VA space
This patch moves the start address of Samsung SoCs' VA space so that
can use more vmalloc()/ioremap() space. Of course need to change the
VMALLOC_END for it.

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:38 +09:00
Jongsun Han d8bb31e68f ARM: S5PV310: Add support External Interrupt
This patch adds EINT(External Interrupt) support on S5PV310 and S5PC210.
All EINTs are transferred to GIC through interrupt combiner.

Signed-off-by: Jongsun Han <jongsun.han@samsung.com>
Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:28 +09:00
Jongsun Han 40c9bc5c3c ARM: S5PV310: Add the definition for external interrupt
This patch adds the definition for both IRQs and GPIO registers for
external interrupts.

Signed-off-by: Jongsun Han <jongsun.han@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:21 +09:00
Kyungmin Park 1cf0eb7997 ARM: S5PV310: Add L2 cache init function in cpu.c
This patch adds L2 cache initialization code in cpu.c of ARCH_S5PV310.
It includes TAG and Data latency, Prefetch, and Power configurations.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:16 +09:00
Kyungmin Park 57c1f87136 ARM: S5PV310: Remove L2 cache init in machine
Basically, need L2 cache initialize function in ARCH_S5PV310. So it would
be better to move it into ARCH_S5PV310 common part. This patch removes L2
cache initialization code at the each board file.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Changhwan Youn <chaos.youn@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:07 +09:00
Kyungmin Park 63612a1f91 ARM: Add L2X0 PREFETCH and POWER control register
This patch adds L2X0 Prefetch and Power control register.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:11:01 +09:00
Seungwhan Youn 6c69abb27f ARM: SAMSUNG: Move DMA clock enable into S3C PL330 driver
This patch moves DMA clock enable functionality into pl330_probe() of
plat-samsung/s3c_pl330.c (PL330 DMAC driver) and disable functionality
into pl330_remove().
For now according to clock policy of Samsung SoCs' mainline, clocks which
are used in the driver should be controlled by each own.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
[kgene.kim@samsung.com: minor title and comment edit]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:10:56 +09:00
Seungwhan Youn 9d59c17ab5 ARM: S5P: Reorder DMA platform device id
This patch is matched-up DMA platform device id to its clock id.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:10:47 +09:00
Seungwhan Youn b05d85350c ARM: S5P64X0: Set DMA clock disable as default
This patch modify to DMA operation clock into disable list for default
clock setting.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:10:42 +09:00
Seungwhan Youn 313068fd3c ARM: S5PV210: Add DMA operation clock
This patch adds DMA operation clock which is disabled as default.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:10:37 +09:00
Seungwhan Youn 06185c0762 ARM: S5P6442: Add DMA operation clock
This patch adds DMA operation clock which is disabled as default.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:10:33 +09:00
Kukjin Kim 8e0e9e2958 Merge branch 'next-s3c64xx' into for-next 2010-10-25 16:10:16 +09:00
Kukjin Kim 7684f784b0 Merge branch 'next-s3c24xx' into for-next 2010-10-25 16:08:29 +09:00
Jassi Brar 05daf07925 ARM: S5PC100: Fix Audio, Keypad and ADC clock sources
Audio, Keypad and ADC inherit PCLKD1 clock source.

Signed-off-by: Jassi Brar <jassi.brar@samsung.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:07:06 +09:00
Chanwoo Choi 8084979800 ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework
This patch add cose related to regulator. To control powre consumeption
have registered the voltage consumer of WM8994 to the regulator framework.

Additionally, I explain the constraints of the regulator of WM8994 codec.
All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V)
on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is
used to many devices on Goni/Aquila board. This is required especially
when there are many devices physically attached to "VCC_1.8V" and some of
they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be
turned off by those who are registered while "unregistered" are still active

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:07:00 +09:00
Chanwoo Choi 6c29e71c61 ARM: S5PV210: Add init code of audio to Goni and Auqila board
This patch add initialization code of audio and I2S platform drivers
to Goni and Aquila board.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:50 +09:00
Chanwoo Choi 5112267e3f ARM: S5PV210: Add i2c information to Goni and Aquila board
This patch the I2C board information for the WM8994 used in the Goni/Aquila
as audio codec and adds the I2C platform drivers.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:45 +09:00
Jongpill Lee d2e7eca36d ARM: S5PV310: Add support GPIOlib
This patch adds GPIOlib support for S5PV310 and S5PC210.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
[kgene.kim@samsung.com: Fix NR_IRQS]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:33 +09:00
Jongpill Lee 37ea63b14b ARM: S5P: Add initial map for GPIO2 and GPIO3
This patch adds initial map for GPIO2 and GPIO3.
S5PV310/S5PC210 has separated GPIO1, GPIO2 and GPIO3.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:22 +09:00
Jongpill Lee 3e7d5e5a4a ARM: S5PV310: Update MAX_COMBINER_NR
This patch updates MAX_COMBINER_NR from 39 to 40 because
S5PV310 need 39th combiner for including EINT16_31.

Signed-off-by: Jongpill Lee <boyko.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:18 +09:00
Seungwhan Youn 9616674a35 ARM: S5P: Add EPLL rate change warning
This patch adds warning about changing EPLL rate to notice that other
driver that controls H/W, which is using EPLL, will has unknown effects
by this EPLL rate change.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:13 +09:00
Seungwhan Youn c9fa7a08cc ARM: S5PV210: Add EPLL clock operations
This patch adds EPLL specific clock get_rate/set_rate operations
on S5PV210.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:09 +09:00
Seungwhan Youn 42a6e20e4f ARM: S5PV210: Fix wrong EPLL rate getting on setup clocks
This patch fix wrong EPLL getting on setup clocks on S5PV210.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:06:00 +09:00
Seungwhan Youn d4b34c6c84 ARM: S5P: Reduce duplicated EPLL control codes
S5P Samsung SoCs has a EPLL to support various PLL clock sources for other
H/W blocks. Until now, to control EPLL, each of SoCs make their own functions
in 'mach-s5pxxx/clock.c'. But some of functions, 'xxx_epll_get_rate()' and
'xxx_epll_enable()', are exactly same in all S5P SoCs, so this patch move
these duplicated codes to common EPLL functions that use platform wide.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:56 +09:00
Seungwhan Youn 900fa0196c ARM: S5PV210: Add audio clocks as sysclk
This patch adds audio clocks(SCLK_AUDIO{0,1,2} and SCLK_AUDIO) to be
initial as a sysclk on boot-time.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:49 +09:00
Seungwhan Youn aa21ae3d87 ARM: S5PV210: Add SCLK_SPDIF clock
This patch add SCLK_SPDIF clock to support source clock of S/PDIF
on S5PV210.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:40 +09:00
Seungwhan Youn 494edadd62 ARM: S5PV210: Add S/PDIF platform device
This patch add S/PDIF platform device to support S/PDIF PCM audio
on S5PV210.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:34 +09:00
Seungwhan Youn 04a4fd0ae2 ARM: S5PC100: Add SCLK_SPDIF clock
This patch add SCLK_SPDIF clock to support source clock of S/PDIF
on S5PC100.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:28 +09:00
Seungwhan Youn 4cfd9c2530 ARM: S5PC100: Modify SCLK_AUDIO{0,1,2} clock as sysclks
This patch modify SCLK_AUDIO{0,1,2} to be initial as sysclks
on boot-time.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:19 +09:00
Seungwhan Youn 068b432d74 ARM: S5PC100: Add S/PDIF platform device
This patch add S/PDIF platform device to support S/PDIF PCM audio
on S5PC100.

Signed-off-by: Seungwhan Youn <sw.youn@samsung.com>
Acked-by: Jassi Brar <jassi.brar@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:05:11 +09:00
Mark Brown 6b2cff9606 ARM: S3C64XX: Ensure s3c64xx_ide_setup_gpio() is prototyped
Since it's exported we should make sure we're using the prototype
others see.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:04:33 +09:00
Mark Brown 821c3a35cb ARM: S3C64XX: Ensure samsung_keypad_cfg_gpio() is prototyped
Since it's exported we should make sure we're using the prototype
others see.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:04:27 +09:00
Jaecheol Lee d8144aea5e ARM: S5PV210: Update Kconfig and Makefile for supporting CPUFREQ driver
This patch adds ARCH_HAS_CPUFREQ in arch/arm/Kconfig for S5PV210,
and updates mach-s5pv210/Makefile for supporting build CPUFREQ driver.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:04:20 +09:00
Jaecheol Lee 83efc7432f ARM: S5PV210: Add support CPUFREQ
This patch adds CPUFREQ driver for supporting DFS(Dynamic Frequency Scaling).

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:04:09 +09:00
Jaecheol Lee 3c5992160d ARM: S5PV210: Add Register definition for CMU
This patch adds some CMU(Clock Management Unit) registers for
supporting CPUFREQ and some drivers.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:04:04 +09:00
Jaecheol Lee 08f49d118e ARM: S5PV210: Add MOUT_DMC0 and SCLK_DMC0 clocks
This patch adds MOUT_DMC0 and SCLK_DMC0 for checking the dmc0 clock
in CPUFREQ driver.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:03:59 +09:00
Jaecheol Lee 8869584397 ARM: S5PV210: Add struct clk_ops for clk_fout_apll
Current fout_apll has fixed rate value. So CPUFREQ driver gets
incorrect value when finding current CPU frequency. Because some
operation level need to change APLL.
Added get_rate function for fout_apll can give correct frequency
value when calling get_rate function.

Signed-off-by: Jaecheol Lee <jc.lee@samsung.com>
Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2010-10-25 16:03:48 +09:00