Commit Graph

259 Commits

Author SHA1 Message Date
Masahiro Yamada e324654294 ARM: use "depends on" for SoC configs instead of "if" after prompt
Many ARM sub-architectures use prompts followed by "if" conditional,
but it is wrong.

Please notice the difference between

    config ARCH_FOO
            bool "Foo SoCs" if ARCH_MULTI_V7

and

    config ARCH_FOO
            bool "Foo SoCs"
            depends on ARCH_MULTI_V7

These two are *not* equivalent!

In the former statement, it is not ARCH_FOO, but its prompt that
depends on ARCH_MULTI_V7.  So, it is completely valid that ARCH_FOO
is selected by another, but ARCH_MULTI_V7 is still disabled. As it is
not unmet dependency, Kconfig never warns.  This is probably not what
you want.

The former should be used only when you need to do so, and you really
understand what you are doing.  (In most cases, it should be wrong!)

For enabling/disabling sub-architectures, the latter is always correct.

As a good side effect, this commit fixes some entries over 80 columns
(mach-imx, mach-integrator, mach-mbevu).

[Arnd: I note that there is not really a bug here, according to
 the discussion that followed, but I can see value in being consistent
 and in making the lines shorter]

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Krzysztof Halasa <khc@piap.pl>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 22:44:51 +01:00
Masahiro Yamada 75305275a7 ARM: use const and __initconst for smp_operations
These smp_operations structures are not over-written, so add "const"
qualifier and replace __initdata with __initconst.

Also, add "static" where it is possible.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org> # qcom part
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-12-01 22:17:45 +01:00
Stephen Boyd b96fc2f3c1 ARM: Remove __ref on hotplug cpu die path
Now that __cpuinit has been removed, the __ref markings on these
functions are useless. Remove them. This also reduces the size of
the multi_v7_defconfig image:

$ size before after
   text    data     bss     dec     hex filename
   12683578        1470996  348904 14503478         dd4e36 before
   12683274        1470996  348904 14503174         dd4d06 after

presumably because now we don't have to jump to code in the
.ref.text section and/or the noinline marking is removed.

Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-omap@vger.kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Cc: <spear-devel@list.st.com>
Cc: <linux-tegra@vger.kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Barry Song <baohua@kernel.org>
Acked-by: Andy Gross <agross@codeaurora.org>
Acked-by: Viresh Kumar <vireshk@kernel.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-10-22 09:55:03 -07:00
Jon Hunter 4c2880b31c irqchip/gic: Ensure gic_cpu_if_up/down() programs correct GIC instance
Commit 3228950621 ("irqchip: gic: Preserve gic V2 bypass bits in cpu
ctrl register") added a new function, gic_cpu_if_up(), to program the
GIC CPU_CTRL register. This function assumes that there is only one GIC
instance present and hence always uses the chip data for the primary GIC
controller. Although it is not common for there to be a secondary, some
devices do support a secondary. Therefore, fix this by passing
gic_cpu_if_up() a pointer to the appropriate chip data structure.

Similarly, the function gic_cpu_if_down() only assumes that there is a
single GIC instance present. Update this function so that an instance
number is passed for the appropriate GIC and return an error code on
failure. The vexpress TC2 (which has a single GIC) is currently the only
user of this function and so update it accordingly. Note that because the
TC2 only has a single GIC, the call to gic_cpu_if_down() should always
be successful.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1438332252-25248-2-git-send-email-jonathanh@nvidia.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-04 14:14:06 +02:00
Paul Gortmaker 4a0ece7cec arm: don't use module_init in non-modular mach-vexpress/spc.c code
The spc.o is built for ARCH_VEXPRESS_SPC -- which is bool, and hence
this code is either present or absent.  It will never be modular,
so using module_init as an alias for __initcall can be somewhat
misleading.

Fix this up now, so that we can relocate module_init from
init.h into module.h in the future.  If we don't do this, we'd
have to add module.h to obviously non-modular code, and that
would be a worse thing.

Note that direct use of __initcall is discouraged, vs. one
of the priority categorized subgroups.  As __initcall gets
mapped onto device_initcall, our use of device_initcall
directly in this change means that the runtime impact is
zero -- it will remain at level 6 in initcall ordering.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2015-06-16 14:12:29 -04:00
Linus Torvalds 7d2b6ef19c ARM: SoC driver updates for v4.1
Driver updates for v4.1. Some of these are for drivers/soc, where we find more
 and more SoC-specific drivers these days. Some are for other driver subsystems
 where we have received acks from the appropriate maintainers.
 
 The larger parts of this branch are:
 
 - MediaTek support for their PMIC wrapper interface, a high-level interface
   for talking to the system PMIC over a dedicated I2C interface.
 - Qualcomm SCM driver has been moved to drivers/firmware. It's used for CPU
   up/down and needs to be in a shared location for arm/arm64 common code.
 - Cleanup of ARM-CCI PMU code.
 - Anoter set of cleanusp to the OMAP GPMC code.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzKYAAoJEIwa5zzehBx3UJ8P/37OA1Qc5vR/Kyc8WlhPlNFV
 MRE7ajM+FMd/Islt4nVNKATK2o3peCTPrqcniDfdPmN2dM1l4LvdeIvkIhKpB09h
 ovmYTZLI/AIbbkttWybGO4lVpFeATxX5N91XXBHvbqkMh6N6ppiYWZUYeJs9EhAw
 2YKykfDCTjKykS+m4YThXw9SCF/6mkCvaBL2VAuKnoV0ygjQD109Fce/irKaAoyw
 L2w4PXOimUk8RshTx3afKCgTotMS0e9JWjKjvDO5M2KAD8DHm7PDRMmRVzA2sSFG
 E2BCfh2DTjzJjdfRYsTd1bYnWzvakX1CzLjiFv+Sb0ctanoZdiDtJIDpX+vSXZ+D
 W7i0yhEWIrr2qaZOyXR8znw8BhzdVZhmT+O76N47HvzMb5JUkaZBhEUBfUyeDbk+
 YhEwz1G+YxT+fg7bBrxa3vLzOJ2pUwVJPITNuPKr6eZJmaBqgx2M7xXs3KyIJX1Y
 AV9eUs2uNCyonawO6xXRhlUKREKL1TftqNXfLj7MYg6AaoVqK0qNRfuCdhMFhMdN
 88QCl/qpPtIDL6ZnxlOejs30+DCH1QPx6+GhxkUlVlF1j/2ZM0cK2cj3tggDbNvN
 uSy/g5pYDp62Az8UCoNXmKdnb4UONigb7k49naZbW/9CGRp1rrmUdzPUAm0tHMBT
 HsH7ms+nHAZHrAlNvvtP
 =/sWo
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for v4.1.  Some of these are for drivers/soc, where we
  find more and more SoC-specific drivers these days.  Some are for
  other driver subsystems where we have received acks from the
  appropriate maintainers.

  The larger parts of this branch are:

   - MediaTek support for their PMIC wrapper interface, a high-level
     interface for talking to the system PMIC over a dedicated I2C
     interface.

   - Qualcomm SCM driver has been moved to drivers/firmware.  It's used
     for CPU up/down and needs to be in a shared location for arm/arm64
     common code.

   - cleanup of ARM-CCI PMU code.

   - another set of cleanusp to the OMAP GPMC code"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  soc/mediatek: Remove unused variables
  clocksource: atmel-st: select MFD_SYSCON
  soc: mediatek: Add PMIC wrapper for MT8135 and MT8173 SoCs
  arm-cci: Fix CCI PMU event validation
  arm-cci: Split the code for PMU vs driver support
  arm-cci: Get rid of secure transactions for PMU driver
  arm-cci: Abstract the CCI400 PMU specific definitions
  arm-cci: Rearrange code for splitting PMU vs driver code
  drivers: cci: reject groups spanning multiple HW PMUs
  ARM: at91: remove useless include
  clocksource: atmel-st: remove mach/hardware dependency
  clocksource: atmel-st: use syscon/regmap
  ARM: at91: time: move the system timer driver to drivers/clocksource
  ARM: at91: properly initialize timer
  ARM: at91: at91rm9200: remove deprecated arm_pm_restart
  watchdog: at91rm9200: implement restart handler
  watchdog: at91rm9200: use the system timer syscon
  mfd: syscon: Add atmel system timer registers definition
  ARM: at91/dt: declare atmel,at91rm9200-st as a syscon
  soc: qcom: gsbi: Add support for ADM CRCI muxing
  ...
2015-04-22 09:18:17 -07:00
Linus Torvalds e6c81cce56 ARM: SoC platform updates for v4.1
Our SoC branch usually contains expanded support for new SoCs and other core
 platform code. In this case, that includes:
 
 - Support for the new Annapurna Labs "Alpine" platform
 - A rework greatly simplifying adding new platform support to the MCPM
   subsystem (Multi-cluster power management)
 - Cpuidle and PM improvements for Exynos3250
 - Misc updates for Renesas, OMAP, Meson, i.MX. Some of these could have
   gone in other branches but ended up here for various reasons.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVNzfWAAoJEIwa5zzehBx3idcP/Rt042tqb0bian/4M1Ud1aQ7
 AMRd4oU5MfWAlzaGPeMBS+b1eo/eENj6wyWsvBQIByZN76ImlUXtxsx0U0frLrVg
 mWVo9zOLRuoE6yyq329zZgg1IM1RtRIruS6zucKsHgKtq0DcjhYGGUH0ZVZk/rKI
 RLtRK8U6Jr0lnpu1TDE5mii7GCCZlEl5dG+J3w5ewC9y7RLRlM09xjK/Zsj0QOqY
 JvMOIaHuHMT6l7BQ6QajtVxTeGECOJ3YDqC6mDHCVD7f3v88+7H5C20xNGPK921w
 tLfB5qOojnj+kKZRPhi8EGnRzKwrBq6/mE5CvvigTCGlAEUOzy7PFSY9oNE80QeL
 6mUdPTuZuqz7ZEIF0kj8I0AkB6k8B+aYfqA9mqM5yGpa11HvZZGfP7CwI4izoe6+
 sT++0OeDPwbsMyRxZjqNQLs4QYaKGYMP4NCgA17zz5ToRCQZy7e5hd2GYzaRouyi
 kTpR9FbxwDcBIwTcA3F7oJ90BEMJ0tvGz/Al11UQpzPePhTwQt2yB5bRZyK/RYIU
 x8k8RHArG3fmS89D4aOViL3sy/zoUBedx4UfAo6jVbrvoZGALQL23KHdqBqDiPmP
 sMRj/sSr+0h9nJCVNM6I/OUD4/IrpFGaeX9V7rpEsHVe7j83eV7Q2wNRPyVTgxdn
 jS8TS0FNAXIv8FO9EoNH
 =tcGs
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Olof Johansson:
 "Our SoC branch usually contains expanded support for new SoCs and
  other core platform code.  In this case, that includes:

   - support for the new Annapurna Labs "Alpine" platform

   - a rework greatly simplifying adding new platform support to the
     MCPM subsystem (Multi-cluster power management)

   - cpuidle and PM improvements for Exynos3250

   - misc updates for Renesas, OMAP, Meson, i.MX.  Some of these could
     have gone in other branches but ended up here for various reasons"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  ARM: alpine: add support for generic pci
  ARM: Exynos: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
  ARM: vexpress: DCSCB: tighten CPU validity assertion
  ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
  ARM: MCPM: move the algorithmic complexity to the core code
  ARM: EXYNOS: allow cpuidle driver usage on Exynos3250 SoC
  ARM: EXYNOS: add AFTR mode support for Exynos3250
  ARM: EXYNOS: add code for setting/clearing boot flag
  ARM: EXYNOS: fix CPU1 hotplug on Exynos3250
  ARM: S3C64XX: Use fixed IRQ bases to avoid conflicts on Cragganmore
  ARM: cygnus: fix const declaration bcm_cygnus_dt_compat
  ARM: DRA7: hwmod: Fix the hwmod class for GPTimer4
  ARM: DRA7: hwmod: Add data for GPTimers 13 through 16
  ARM: EXYNOS: Remove left over 'extra_save'
  ARM: EXYNOS: Constify exynos_pm_data array
  ARM: EXYNOS: use static in suspend.c
  ARM: EXYNOS: Use platform device name as power domain name
  ARM: EXYNOS: add support for async-bridge clocks for pm_domains
  ARM: omap-device: add missed callback for suspend-to-disk
  ...
2015-04-22 09:08:39 -07:00
Russell King f6ac49ba29 ARM: vexpress: fix CPU hotplug with CT9x4 tile.
The Cortex A9 tile fails to unplug CPUs if errata 643719 is not enabled.
This leads to random weird behaviours, but ultimately seem to lock the
kernel one way or another when a CPU is hot unplugged.

Symptoms range from a spinlock lockup in the scheduler, the entire
system hanging, to dumping out the kernel printk buffer a few lines at
a time, and other weird behaviours.

This is caused by the outgoing CPU not having its inner caches properly
flushed before it exits coherency - flush_cache_louis() is used to
achieve this, but as a result of the hardware bug, this function ends
up doing nothing without the errata workaround enabled.

As the Versatile Express has an affected CPU, this errata must always
be enabled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-07 15:40:21 +01:00
Nicolas Pitre 323ab95339 ARM: vexpress: migrate DCSCB to the new MCPM backend abstraction
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03 12:52:48 -07:00
Nicolas Pitre 03fd5db717 ARM: vexpress: DCSCB: tighten CPU validity assertion
Currently the cpu argument validity check uses a hardcoded limit of 4.
The DCSCB configuration data provides the actual number of CPUs and
we already use it elsewhere.  Let's improve the cpu argument validity
check by using that information instead.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03 12:52:47 -07:00
Nicolas Pitre 41f26e2d94 ARM: vexpress: migrate TC2 to the new MCPM backend abstraction
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2015-04-03 12:52:47 -07:00
Suzuki K. Poulose ee8e5d5fbe arm-cci: Split the code for PMU vs driver support
This patch separates the PMU driver code from the low level
CCI driver code and enables the PMU driver for ARM64.

Introduces config options for both.

 ARM_CCI400_PORT_CTRL	- controls the low level driver code for
			  CCI400 ports.
 ARM_CCI400_PMU		- controls the PMU driver code
 ARM_CCI400_COMMON	- Common defintions for CCI400

This patch also changes:
 ARM_CCI - common code for probing the CCI devices. This can be
   used for adding support for newer CCI versions(e.g, CCI-500).

Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-27 13:44:43 +00:00
Arnd Bergmann 95fcedb027 ARM: vexpress: use ARM_CPU_SUSPEND if needed
The vexpress tc2 power management code calls mcpm_loopback, which
is only available if ARM_CPU_SUSPEND is enabled, otherwise we
get a link error:

arch/arm/mach-vexpress/built-in.o: In function `tc2_pm_init':
arch/arm/mach-vexpress/tc2_pm.c:389: undefined reference to `mcpm_loopback'

This explicitly selects ARM_CPU_SUSPEND like other platforms that
need it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 3592d7e002 ("ARM: 8082/1: TC2: test the MCPM loopback during boot")
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-02-18 12:19:09 +01:00
Pawel Moll 1f1dd5889c ARM: vexpress: Enable regulator framework when MMCI is in use
The MMCI driver, when used with a Device Tree described device, relies
on the "vmmc" voltage regulator supply to set the OCR register voltage bits,
using MMC core's mmc_regulator_get_supply() function.

Without the regulator framework present there are no valid operating
voltages reported and the device initialisation fails:

mmci-pl18x 10005000.mmci: No vmmc regulator found
mmci-pl18x 10005000.mmci: no support for card's volts
mmc0: error -22 whilst initialising SD card

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 21:57:07 +01:00
Pawel Moll 81cc3f868d ARM: vexpress: Remove non-DT code
Now, with the CLCD DT support available, there is no
more reason to keep the non-DT support for V2P-CA9.

Removed, together with "some" supporting code. It was
necessary to make PLAT_VERSATILE_SCHED_CLOCK optional
and selected by the machines still interested in it.

Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28 16:08:16 +01:00
Alex Shi e160cc1768 vexpress/spc: fix a build warning on array bounds
With ARCH_VEXPRESS_SPC option, kernel build has the following
warning:

arch/arm/mach-vexpress/spc.c: In function ‘ve_spc_clk_init’:
arch/arm/mach-vexpress/spc.c:431:38: warning: array subscript is below array bounds [-Warray-bounds]
  struct ve_spc_opp *opps = info->opps[cluster];
                                      ^
since 'cluster' maybe '-1' in UP system. This patch does a active
checking to fix this issue.

Signed-off-by: Alex Shi <alex.shi@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-08-31 10:22:10 -07:00
Linus Torvalds 44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Linus Torvalds 7725131982 ACPI and power management updates for 3.17-rc1
- ACPICA update to upstream version 20140724.  That includes
    ACPI 5.1 material (support for the _CCA and _DSD predefined names,
    changes related to the DMAR and PCCT tables and ARM support among
    other things) and cleanups related to using ACPICA's header files.
    A major part of it is related to acpidump and the core code used
    by that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
    Sascha Wildner, Tomasz Nowicki, Hanjun Guo.
 
  - Radix trees for memory bitmaps used by the hibernation core from
    Joerg Roedel.
 
  - Support for waking up the system from suspend-to-idle (also known
    as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
    (Rafael J Wysocki).
 
  - Fixes for issues related to ACPI button events (Rafael J Wysocki).
 
  - New device ID for an ACPI-enumerated device included into the
    Wildcat Point PCH from Jie Yang.
 
  - ACPI video updates related to backlight handling from Hans de Goede
    and Linus Torvalds.
 
  - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
    and Graeme Gregory.
 
  - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.
 
  - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
    (Rafael J Wysocki).
 
  - ACPI-based device hotplug cleanups from Wei Yongjun and
    Rafael J Wysocki.
 
  - Cleanups and improvements related to system suspend from
    Lan Tianyu, Randy Dunlap and Rafael J Wysocki.
 
  - ACPI battery cleanup from Wei Yongjun.
 
  - cpufreq core fixes from Viresh Kumar.
 
  - Elimination of a deadband effect from the cpufreq ondemand
    governor and intel_pstate driver cleanups from Stratos Karafotis.
 
  - 350MHz CPU support for the powernow-k6 cpufreq driver from
    Mikulas Patocka.
 
  - Fix for the imx6 cpufreq driver from Anson Huang.
 
  - cpuidle core and governor cleanups from Daniel Lezcano,
    Sandeep Tripathy and Mohammad Merajul Islam Molla.
 
  - Build fix for the big_little cpuidle driver from Sachin Kamat.
 
  - Configuration fix for the Operation Performance Points (OPP)
    framework from Mark Brown.
 
  - APM cleanup from Jean Delvare.
 
  - cpupower utility fixes and cleanups from Peter Senna Tschudin,
    Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJT4nhtAAoJEILEb/54YlRxtZEP/2rtVQFSFdAW8l0Xm1SeSsl4
 EnZpSNT1TFn+NdG23vSIot5Jzdz1/dLfeoJEbXpoVt4DPC9/PK4HPlv5FEDQYfh5
 srftvvGcAva969sXzSBRNUeR+M8Yd2RdoYCfmqTEUjzf8GJLL4jC0VAIwMtsQklt
 EbiQX8JaHQS7RIql7MDg1N2vaTo+zxkf39Kkcl56usmO/uATP7cAPjFreF/xQ3d8
 OyBhz1cOXIhPw7bd9Dv9AgpJzA8WFpktDYEgy2sluBWMv+mLYjdZRCFkfpIRzmea
 pt+hJDeAy8ZL6/bjWCzz2x6wG7uJdDLblreI28sgnJx/VHR3Co6u4H1BqUBj18ct
 CHV6zQ55WFmx9/uJqBtwFy333HS2ysJziC5ucwmg8QjkvAn4RK8S0qHMfRvSSaHj
 F9ejnHGxyrc3zzfsngUf/VXIp67FReaavyKX3LYxjHjMPZDMw2xCtCWEpUs52l2o
 fAbkv8YFBbUalIv0RtELH5XnKQ2ggMP8UgvT74KyfXU6LaliH8lEV20FFjMgwrPI
 sMr2xk04eS8mNRNAXL8OMMwvh6DY/Qsmb7BVg58RIw6CdHeFJl834yztzcf7+j56
 4oUmA16QYBCFA3udGQ3Tb07mi8XTfrMdTOGA0koQG9tjswKXuLUXUk9WAXZe4vml
 ItRpZKE86BCs3mLJMYre
 =ZODv
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI and power management updates from Rafael Wysocki:
 "Again, ACPICA leads the pack (47 commits), followed by cpufreq (18
  commits) and system suspend/hibernation (9 commits).

  From the new code perspective, the ACPICA update brings ACPI 5.1 to
  the table, including a new device configuration object called _DSD
  (Device Specific Data) that will hopefully help us to operate device
  properties like Device Trees do (at least to some extent) and changes
  related to supporting ACPI on ARM.

  Apart from that we have hibernation changes making it use radix trees
  to store memory bitmaps which should speed up some operations carried
  out by it quite significantly.  We also have some power management
  changes related to suspend-to-idle (the "freeze" sleep state) support
  and more preliminary changes needed to support ACPI on ARM (outside of
  ACPICA).

  The rest is fixes and cleanups pretty much everywhere.

  Specifics:

   - ACPICA update to upstream version 20140724.  That includes ACPI 5.1
     material (support for the _CCA and _DSD predefined names, changes
     related to the DMAR and PCCT tables and ARM support among other
     things) and cleanups related to using ACPICA's header files.  A
     major part of it is related to acpidump and the core code used by
     that utility.  Changes from Bob Moore, David E Box, Lv Zheng,
     Sascha Wildner, Tomasz Nowicki, Hanjun Guo.

   - Radix trees for memory bitmaps used by the hibernation core from
     Joerg Roedel.

   - Support for waking up the system from suspend-to-idle (also known
     as the "freeze" sleep state) using ACPI-based PCI wakeup signaling
     (Rafael J Wysocki).

   - Fixes for issues related to ACPI button events (Rafael J Wysocki).

   - New device ID for an ACPI-enumerated device included into the
     Wildcat Point PCH from Jie Yang.

   - ACPI video updates related to backlight handling from Hans de Goede
     and Linus Torvalds.

   - Preliminary changes needed to support ACPI on ARM from Hanjun Guo
     and Graeme Gregory.

   - ACPI PNP core cleanups from Arjun Sreedharan and Zhang Rui.

   - Cleanups related to ACPI_COMPANION() and ACPI_HANDLE() macros
     (Rafael J Wysocki).

   - ACPI-based device hotplug cleanups from Wei Yongjun and Rafael J
     Wysocki.

   - Cleanups and improvements related to system suspend from Lan
     Tianyu, Randy Dunlap and Rafael J Wysocki.

   - ACPI battery cleanup from Wei Yongjun.

   - cpufreq core fixes from Viresh Kumar.

   - Elimination of a deadband effect from the cpufreq ondemand governor
     and intel_pstate driver cleanups from Stratos Karafotis.

   - 350MHz CPU support for the powernow-k6 cpufreq driver from Mikulas
     Patocka.

   - Fix for the imx6 cpufreq driver from Anson Huang.

   - cpuidle core and governor cleanups from Daniel Lezcano, Sandeep
     Tripathy and Mohammad Merajul Islam Molla.

   - Build fix for the big_little cpuidle driver from Sachin Kamat.

   - Configuration fix for the Operation Performance Points (OPP)
     framework from Mark Brown.

   - APM cleanup from Jean Delvare.

   - cpupower utility fixes and cleanups from Peter Senna Tschudin,
     Andrey Utkin, Himangi Saraogi, Rickard Strandqvist, Thomas
     Renninger"

* tag 'pm+acpi-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (118 commits)
  ACPI / LPSS: add LPSS device for Wildcat Point PCH
  ACPI / PNP: Replace faulty is_hex_digit() by isxdigit()
  ACPICA: Update version to 20140724.
  ACPICA: ACPI 5.1: Update for PCCT table changes.
  ACPICA/ARM: ACPI 5.1: Update for GTDT table changes.
  ACPICA/ARM: ACPI 5.1: Update for MADT changes.
  ACPICA/ARM: ACPI 5.1: Update for FADT changes.
  ACPICA: ACPI 5.1: Support for the _CCA predifined name.
  ACPICA: ACPI 5.1: New notify value for System Affinity Update.
  ACPICA: ACPI 5.1: Support for the _DSD predefined name.
  ACPICA: Debug object: Add current value of Timer() to debug line prefix.
  ACPICA: acpihelp: Add UUID support, restructure some existing files.
  ACPICA: Utilities: Fix local printf issue.
  ACPICA: Tables: Update for DMAR table changes.
  ACPICA: Remove some extraneous printf arguments.
  ACPICA: Update for comments/formatting. No functional changes.
  ACPICA: Disassembler: Add support for the ToUUID opererator (macro).
  ACPICA: Remove a redundant cast to acpi_size for ACPI_OFFSET() macro.
  ACPICA: Work around an ancient GCC bug.
  ACPI / processor: Make it possible to get local x2apic id via _MAT
  ...
2014-08-06 20:34:19 -07:00
Arnd Bergmann ec4c4d877b video: fix up versatile CLCD helper move
commit 11c32d7b62 ("video: move Versatile CLCD helpers")
moved files out of the plat-versatile directory but in the process
got a few of the dependencies wrong:

- If CONFIG_FB is not set, the file no longer gets built, resulting
  in a link error
- If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a
  Kconfig warning for incorrect dependencies due to the symbol
  being 'select'ed from the platform Kconfig.
- When the file is not built, we also get a link error for missing
  symbols.

This patch should fix all three, by removing the 'select' statements,
changing the Kconfig description of the symbol to be enabled in
exactly the right configurations, and adding inline stub functions
for the case when the framebuffer driver is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:41:00 +02:00
Mark Brown 78c5e0bb14 PM / OPP: Remove ARCH_HAS_OPP
Since the OPP layer is a kernel library which has been converted to be
directly selectable by its callers rather than user selectable and
requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
has become redundant and can be removed. Do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-07-23 00:51:30 +02:00
Russell King af040ffc9b ARM: make it easier to check the CPU part number correctly
Ensure that platform maintainers check the CPU part number in the right
manner: the CPU part number is meaningless without also checking the
CPU implement(e|o)r (choose your preferred spelling!)  Provide an
interface which returns both the implementer and part number together,
and update the definitions to include the implementer.

Mark the old function as being deprecated... indeed, using the old
function with the definitions will now always evaluate as false, so
people must update their un-merged code to the new function.  While
this could be avoided by adding new definitions, we'd also have to
create new names for them which would be awkward.

Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 12:29:02 +01:00
Nicolas Pitre 3592d7e002 ARM: 8082/1: TC2: test the MCPM loopback during boot
This is not strictly needed on TC2 but still a good idea to exercise
that code.

Signed-off-by: nicolas Pitre <nico@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-07-18 11:58:02 +01:00
Olof Johansson 5db3f62007 First pull request of Versatile family clean-ups for v3.17:
- Remove <mach/memory.h> from the Integrator, paving the
   road for multiplatform.
 - Push the CLCD helper code down into the framebuffer subsystem,
   removing the last hook in plat-versatile for the Integrator,
   also paving the road for multiplatform.
 
 Patches tested on Integrator/AP, Integrator/CP and Versatile AB
 (all real hardware).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTrSikAAoJEEEQszewGV1zh9oP+QHoI4WOUhHJMPNBa5ZpUXdZ
 KnbNHQrBvmSoMfVjQyiJnNz8AJGzlabIA/usMXw0q2QHB3SKx28zOVwhsI2mh1sk
 mVWIyr5ZQa4O5yRwyJtQKbwGRjEi8wQMHYJRMhJLioDgMAWaYC1t/fFNKH/JH+mi
 JoE/CD+/DBl1lw8px4udL4lisDMSguYOLRoq4GhHPfOEbnMOV4trV2dT7Wn6z3V9
 TcLj9r30rBZcf/GD3+vOzMsUxJtUNU+u/sqfFBbetqrZut5K4PrM4Ybc7xBwJEFr
 55/szveJS4pb+rSZWaCGanSizDTV9P4rjvWsBqVFw2xe1b+HElXZGUmsD0CXsNe4
 64LRTlY5smISgkeQhGqfYyZ4c0n221ceSRsKEV526N7MHKH4wc065wkv+edwps5C
 Yh/kvzo4zgt4pZPP2RNNZm4Rt5aI40W4GYtuV6NzJs2rNrAXDzVibmSRrgkh1j5M
 nbtl3Ygxbwt5VwMGg56AqvPj8tOUrolNBC12b6Pumakpvlr/br918GtOKvrSqKaT
 FSXTHnkYNcn5vwChXMc6kqXfl/rh/eKDYlevkrSPDgiKergqJBZMQjoSOTVxgAox
 q+zbOK88qHJOFdXuulcAaPFoRWLmjJ+90sg3uq/nCOD0ZrRyvn/lVIxlPZDcnbcC
 Bc6/qzYhqE3/ulMMBO9n
 =7Tuj
 -----END PGP SIGNATURE-----

Merge tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup

Merge "First pull request of Versatile family clean-ups for v3.17" from Linus
Walleij:

- Remove <mach/memory.h> from the Integrator, paving the
  road for multiplatform.
- Push the CLCD helper code down into the framebuffer subsystem,
  removing the last hook in plat-versatile for the Integrator,
  also paving the road for multiplatform.

Patches tested on Integrator/AP, Integrator/CP and Versatile AB
(all real hardware).

* tag 'versatile-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  video: move Versatile CLCD helpers
  ARM: integrator: get rid of <mach/memory.h>

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-07 22:10:59 -07:00
Linus Walleij 11c32d7b62 video: move Versatile CLCD helpers
This moves the Versatile-specific helper code and panel database
down into the drivers/video folder next to the CLCD driver
itself, preserving the config symbol but also moving the header
to platform data.

This is necessary to rid the Integrator of this final <plat/*>
inclusion dependency and get us one less user of the
plat-versatile folder.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27 10:15:22 +02:00
Linus Torvalds b4b664bef4 Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
 "A number of low impact fixes, the most noticable one is the thumb2
  frame pointer fix.  We also fix a regression caused during this merge
  window with ARM925 CPUs running with caches disabled, and fix a number
  of warnings"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: arm925: ensure assembly sets up writethrough mapping
  ARM: perf: fix compiler warning with gcc 4.6.4 (and tidy code)
  ARM: l2c: fix dependencies on PL310 errata symbols
  ARM: 8069/1: Make thread_save_fp macro aware of THUMB2 mode
  ARM: 8068/1: scoop: Remove unused variable
2014-06-24 13:59:00 -07:00
Russell King a641f3a6ab ARM: l2c: fix dependencies on PL310 errata symbols
A number of configurations spit out warnings similar to:

warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_588369 which has unmet direct dependencies (CACHE_L2X0)
warning: (SOC_IMX6 && SOC_VF610 && ARCH_OMAP4) selects PL310_ERRATA_727915 which has unmet direct dependencies (CACHE_L2X0)

Clean up the dependencies here:
* PL310 symbols should only be selected when CACHE_L2X0 is enabled.
* Since the cache-l2x0 code detects PL310 presence at runtime, and we will
  eventually get rid of CACHE_PL310, surround these errata options with an
  if CACHE_L2X0 conditional rather than repeating the dependency against
  each.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-19 11:29:28 +01:00
Rob Herring 21278aeafb ARM: use menuconfig for sub-arch menus
The System Type menu is getting quite long with platforms and is
inconsistent in handling of sub-arch specific options. Tidy up the menu
by making platform options a menuconfig entry containing any platform
specific config items.

[arnd: change OMAP part according to suggestion from
 Tony Lindgren <tony@atomide.com>]

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:48 +02:00
Stephen Boyd 19682f72f5 ARM: Remove ARCH_HAS_CPUFREQ config option
This config exists entirely to hide the cpufreq menu from the
kernel configuration unless a platform has selected it. Nothing
is actually built if this config is 'Y' and it just leads to more
patches that add a select under a platform Kconfig so that some
other CPUfreq option can be chosen. Let's remove the option so
that we can always enable CPUfreq drivers on ARM platforms.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-06-17 17:09:39 +02:00
Linus Torvalds eb3d3ec567 Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into next
Pull ARM updates from Russell King:

 - Major clean-up of the L2 cache support code.  The existing mess was
   becoming rather unmaintainable through all the additions that others
   have done over time.  This turns it into a much nicer structure, and
   implements a few performance improvements as well.

 - Clean up some of the CP15 control register tweaks for alignment
   support, moving some code and data into alignment.c

 - DMA properties for ARM, from Santosh and reviewed by DT people.  This
   adds DT properties to specify bus translations we can't discover
   automatically, and to indicate whether devices are coherent.

 - Hibernation support for ARM

 - Make ftrace work with read-only text in modules

 - add suspend support for PJ4B CPUs

 - rework interrupt masking for undefined instruction handling, which
   allows us to enable interrupts earlier in the handling of these
   exceptions.

 - support for big endian page tables

 - fix stacktrace support to exclude stacktrace functions from the
   trace, and add save_stack_trace_regs() implementation so that kprobes
   can record stack traces.

 - Add support for the Cortex-A17 CPU.

 - Remove last vestiges of ARM710 support.

 - Removal of ARM "meminfo" structure, finally converting us solely to
   memblock to handle the early memory initialisation.

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (142 commits)
  ARM: ensure C page table setup code follows assembly code (part II)
  ARM: ensure C page table setup code follows assembly code
  ARM: consolidate last remaining open-coded alignment trap enable
  ARM: remove global cr_no_alignment
  ARM: remove CPU_CP15 conditional from alignment.c
  ARM: remove unused adjust_cr() function
  ARM: move "noalign" command line option to alignment.c
  ARM: provide common method to clear bits in CPU control register
  ARM: 8025/1: Get rid of meminfo
  ARM: 8060/1: mm: allow sub-architectures to override PCI I/O memory type
  ARM: 8066/1: correction for ARM patch 8031/2
  ARM: 8049/1: ftrace/add save_stack_trace_regs() implementation
  ARM: 8065/1: remove last use of CONFIG_CPU_ARM710
  ARM: 8062/1: Modify ldrt fixup handler to re-execute the userspace instruction
  ARM: 8047/1: rwsem: use asm-generic rwsem implementation
  ARM: l2c: trial at enabling some Cortex-A9 optimisations
  ARM: l2c: add warnings for stuff modifying aux_ctrl register values
  ARM: l2c: print a warning with L2C-310 caches if the cache size is modified
  ARM: l2c: remove old .set_debug method
  ARM: l2c: kill L2X0_AUX_CTRL_MASK before anyone else makes use of this
  ...
2014-06-05 15:57:04 -07:00
Russell King 1fb333489f Merge branches 'alignment', 'fixes', 'l2c' (early part) and 'misc' into for-next 2014-06-05 12:35:52 +01:00
Linus Torvalds 82e627eb5e Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull timer core updates from Thomas Gleixner:
 "This time you get nothing really exciting:
   - A huge update to the sh* clocksource drivers
   - Support for two more ARM SoCs
   - Removal of the deprecated setup_sched_clock() API
   - The usual pile of fixlets all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  clocksource: Add Freescale FlexTimer Module (FTM) timer support
  ARM: dts: vf610: Add Freescale FlexTimer Module timer node.
  clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation
  clocksource: sh_tmu: Remove unnecessary OOM messages
  clocksource: sh_mtu2: Remove unnecessary OOM messages
  clocksource: sh_cmt: Remove unnecessary OOM messages
  clocksource: em_sti: Remove unnecessary OOM messages
  clocksource: dw_apb_timer_of: Do not trace read_sched_clock
  clocksource: Fix clocksource_mmio_readX_down
  clocksource: Fix type confusion for clocksource_mmio_readX_Y
  clocksource: sh_tmu: Fix channel IRQ retrieval in legacy case
  clocksource: qcom: Implement read_current_timer for udelay
  ntp: Make is_error_status() use its argument
  ntp: Convert simple_strtol to kstrtol
  timer_stats/doc: Fix /proc/timer_stats documentation
  sched_clock: Remove deprecated setup_sched_clock() API
  ARM: sun6i: a31: Add support for the High Speed Timers
  clocksource: sun5i: Add support for reset controller
  clocksource: efm32: use $vendor,$device scheme for compatible string
  KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform
  ...
2014-06-04 15:57:20 -07:00
Russell King b28dd4ac66 ARM: l2c: vexpress: convert to generic l2c OF initialisation
Remove the explicit call to l2x0_of_init(), converting to the generic
infrastructure instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:25 +01:00
Russell King 060bf2af12 ARM: l2c: vexpress ca9x4: move L2 cache initialisation earlier
It is beneficial to have the L2 cache up and running earlier in the
system boot.  Not only will this allow for simpler code when we come to
enable some features, but it also means that we get a more accurate
bogomips value for the udelay() loop.  Calibrating the loop with the
L2 cache off, and then running with the L2 cache on is not the best
idea.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:50:24 +01:00
Russell King 1a5a954ce0 ARM: l2c: fix register naming
We have a mixture of different devices with different register layouts,
but we group all the bits together in an opaque mess.  Split them out
into those which are L2C-310 specific and ones which refer to earlier
devices.  Provide full auxiliary control register definitions.

Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-30 00:48:43 +01:00
Arnd Bergmann b33cdd283b ARM: vexpress: refine dependencies for new code
The versatile express changes for 3.16 introduced a number of
build regressions for randconfig kernels by not tracking dependencies
between the components right.

This patch tries to rectify that:

* the mach-vexpress code cannot link without the syscfg driver,
  which in turn needs MFD_VEXPRESS_SYSREG
* various drivers call devm_regmap_init_vexpress_config(), which
  has to be exported so it can be used by loadable modules
* the configuration bus uses OF DT helper functions that are not
  available to platforms disable CONFIG_OF
* The sysreg driver exports GPIOs through gpiolib, which can
  be disabled on some platforms.
* The clocksource code cannot be built on platforms that don't
  use modern timekeeping but rely on gettimeoffset.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-05-26 21:26:52 +02:00
Dave Martin 166aaf3966 ARM: 8029/1: mcpm: Rename the power_down_finish() functions to be less confusing
The name "power_down_finish" seems to be causing some confusion,
because it suggests that this function is responsible for taking
some action to cause the specified CPU to complete its power down.

This patch renames the affected functions to "wait_for_powerdown"
and similar, since this function's intended purpose is just to wait
for the hardware to finish a powerdown initiated by a previous
cpu_power_down.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-05-25 23:48:12 +01:00
Daniel Lezcano 3f04e3d3eb Merge remote-tracking branch 'tip/timers/core/timers/core' into clockevents/3.16 2014-05-16 16:08:32 +02:00
Pawel Moll 6b2c31c71d ARM: vexpress: move HBI check to sysreg driver
The last reason for static memory mapping is the HBI (board
identification number) check early in the machine code.

Moving the check to the sysreg driver makes it possible to
completely remove the early mapping and init functions.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:21 +01:00
Pawel Moll d2606f81d5 ARM: vexpress: Simplify SMP operations for DT-powered system
As all cores must be properly described in the Device Tree,
there is no point in getting their numbers from SCU on
A5/A9 platforms. This significantly simplifies the code,
removing the need for flat-tree scanning and early static
mapping.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15 17:02:21 +01:00
Sudeep KarkadaNagesha dcdea6295d ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count
arm_dt_init_cpu_maps parses the device tree, validates and sets the
cpu_possible_mask appropriately. It is unnecessary to do another DT
parse to get the number of cpus, use num_possible_cpus instead.

This patch also removes setting cpu_present_mask as platforms should
only re-initialize it in smp_prepare_cpus() if present != possible.

Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-05-15 17:02:21 +01:00
Pawel Moll 220e2a8d22 clocksource: Sched clock source for Versatile Express
This patch adds a trival sched clock source using free
running, 24MHz clocked counter present in the ARM Ltd.
reference platforms (Versatile, RealView, Versatile
Express) System Registers block.

This code replaces the call in the VE machine code.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-15 17:02:20 +01:00
Pawel Moll 974cc7b934 mfd: vexpress: Define the device as MFD cells
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:

* LEDs code has been completely removed and replaced with
  "gpio-leds" nodes in the tree (referencing dedicated
  GPIO subnodes in sysreg - bindings documentation updated);
  this also better fits the reality as some variants of the
  motherboard don't have all the LEDs populated

* syscfg bridge code has been extracted into a separate
  driver (placed in drivers/misc for no better place)

* all the ID & MISC registers are defined as sysconf
  making them available for other drivers should they need
  to use them (and also to the user via /sys/kernel/debug/regmap
  which can be helpful in platform debugging)

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
2014-05-15 17:02:19 +01:00
Pawel Moll 3b9334ac83 mfd: vexpress: Convert custom func API to regmap
Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).

Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:

* a rework (and move to drivers/bus directory, as suggested
  by Samuel and Arnd) of the config bus core, which is much
  simpler now and uses device model infrastructure (class)
  to keep track of the bridges; non-DT case (soon to be
  retired anyway) is simply covered by a special device
  registration function

* the new config-bus driver also takes over device population,
  so there is no need for special matching table for
  of_platform_populate nor "simple-bus" hack in the arm64
  model dtsi file (relevant bindings documentation has
  been updated); this allows all the vexpress devices
  fit into normal device model, making it possible
  to remove plenty of early inits and other hacks in
  the near future

* adaptation of the syscfg bridge implementation in the
  sysreg driver, again making it much simpler; there is
  a special case of the "energy" function spanning two
  registers, where they should be both defined in the tree
  now, but backward compatibility is maintained in the code

* modification of the relevant drivers:

  * hwmon - just a straight-forward API change
  * power/reset driver - API change
  * regulator - API change plus error handling
    simplification
  * osc clock driver - this one required larger rework
    in order to turn in into a standard platform driver

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Mark Brown <broonie@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mike Turquette <mturquette@linaro.org>
2014-05-15 17:02:18 +01:00
Punit Agrawal cf2e0a73ca ARM: vexpress/TC2: Convert OPP voltage to uV before storing
The SPC stores voltage in mV while the code assumes it was returning
uV. Convert the returned voltage to uV before storing. Also fix the
comment depicting voltage to uV.

Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24 17:20:50 +01:00
Heinrich Schuchardt bb6dd5757c arm/mach-vexpress: array accessed out of bounds
dcscb_allcpus_mask is an array of size 2.

The index variable cluster has to be checked against this limit
before accessing the array.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2014-04-24 11:41:12 +01:00
Matthew Leach 7e13c654f4 KConfig: Vexpress: build the ARM_GLOBAL_TIMER with vexpress platform
The Cortex A5 now contains bindings for the global timer
driver. Ensure that the driver is built with a vexpress platform.

Signed-off-by: Matthew Leach <matthew.leach@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2014-04-22 11:44:27 +02:00
Linus Torvalds ede1d63fcc Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull second set of ARM changes from Russell King:
 "This is the remainder of the ARM changes for this merge window.
  Included in this request are:

   - fixes for kprobes for big-endian support
   - fix tracing in soft_restart
   - avoid phys address overflow in kdump code
   - fix reporting of read-only pmd bits in kernel page table dump
   - remove unnecessary (and possibly buggy) call to outer_flush_all()
   - fix a three sparse warnings (missing header file for function
     prototypes)
   - fix pj4 crashing single zImage (thanks to arm-soc merging changes
     which enables this with knowledge that the corresponding fix had
     not even been submitted for my tree before the merge window opened)
   - vfp macro cleanups
   - dump register state on undefined instruction userspace faults when
     debugging"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  Dump the registers on undefined instruction userspace faults
  ARM: 8018/1: Add {inc,dec}_preempt_count asm macros
  ARM: 8017/1: Move asm macro get_thread_info to asm/assembler.h
  ARM: 8016/1: Check cpu id in pj4_cp0_init.
  ARM: 8015/1: Add cpu_is_pj4 to distinguish PJ4 because it has some differences with V7
  ARM: add missing system_misc.h include to process.c
  ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
  ARM: 8014/1: mm: fix reporting of read-only PMD bits
  ARM: 8012/1: kdump: Avoid overflow when converting pfn to physaddr
  ARM: 8010/1: avoid tracers in soft_restart
  ARM: kprobes-test: Workaround GAS .align bug
  ARM: kprobes-test: use <asm/opcodes.h> for Thumb instruction building
  ARM: kprobes-test: use <asm/opcodes.h> for ARM instruction building
  ARM: kprobes-test: use <asm/opcodes.h> for instruction accesses
  ARM: probes: fix instruction fetch order with <asm/opcodes.h>
2014-04-11 11:56:40 -07:00
Russell King 53f1d9afb4 Merge branches 'fixes' and 'misc' into for-next 2014-04-11 14:50:05 +01:00
Uwe Kleine-König ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Nicolas Pitre c9d347e027 ARM: 8009/1: dcscb.c: remove call to outer_flush_all()
Strictly speaking this call is a no-op on the platform where dcscb.c is
used since it only has architected caches.  The call was there as a hint
to people inspired by this code when writing their own backend, but the
hint might not always be correct.

For example, if a PL310 were to be used it wouldn't be safe to call
the regular outer_flush_all() as atomic instructions for locking
are involved in that case and those instructions cannot be assumed to
still be operational after v7_exit_coherency_flush() has returned.
Given no other CPUs (in the cluster) should be running at that point
then standard concurrency concerns wouldn't apply.

So let's simply kill this call for now and enhance the existing comment.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-07 15:27:05 +01:00