Commit Graph

6166 Commits

Author SHA1 Message Date
Olof Johansson bcec1221c9 Fixes for omaps for v5.4-rc cycle
Here are fixes for omaps to deal with few regressions, and to fix
 more boot time errors and warnings:
 
 - The recent ti-sysc interconnect target module driver changes had
   incorrect clock bits for both clocks and dts that cause warnings
 
 - For omap3-gta04, gpio changes caused the LCD to break a while back,
   and after discussing things the right fix is to set spi-cs-high
 
 - Recent omapdrm changes to use generic panels caused tfp410 to be
   disabled as we now must enable the generic support for it in
   defconfig
 
 - Recent omapdrm and backlight changes also finally made droid4 LCD
   to work, so let's enable it in the defconfig it can be used out
   of the box. This is not strictly a fix, but we still also have the
   older CONFIG_MFD_TI_LMU options available so this cuts down the
   confusion for trying to guess which display and which backlight
   is needed
 
 - Recent ti-sysc interconnect target module changes need the gpio
   module disabled on some boards, but this now needs to happen at
   the module level, not at the gpio driver level
 
 - Recent changes to probe system timers with ti-sysc caused warnings
   about mismatch in syconfig registers, so let's configure the option
   for RESET_STATUS as available in the TRMs
 
 - Recent changes to probe LCDC with ti-sysc caused warnings about
   mismatch in sysconfig registers, so let's configure the missing
   idlemodes for both platform data and dts as documented in TRMs
 
 - Since we moved mach-omap2 to probe with device tree, we've been
   getting voltage controller warnings. Turns out this code is no
   longer needed, so let's just remove omap2_set_init_voltage() to
   get rid of the pointless warnings
 
 - Configure am4372 dispc memory bandwidth to avoid underflow errors
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAl2U6fcRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXMu5RAAi9bqFTwKU3YiA4o0yDufGtx63fMziCD4
 pMct5DMqyIfkCbU6KIp/pC3g3x35zl7WjoAbyB9Q8o33g/9mnQUSSTkB1TID/fZ0
 +d7epXsGPRWymP2B13xOH/yRJv8dDeVWVHLBJdatuaAJ0mygpf4a4ChkXYKp+nhl
 oShxeRiOYYCrhowklmjvzV0atz17QSNc42GvAUpL3aicU9XmeYn7JLcxZ+3dBXuz
 5IRbM/kt66i0owT6Oymf2lvf+UXELLXL/bXINPbPyYrXw94WuIk1z3i3gtQLsRk+
 CyoYczBsgSWZRoFJB03324HY+KhGNHbC6kjfqoWk5UrbbX13L1+tSnKSlFRcZddx
 64HPZISsgPOlx+i4TlTw/7YMq6FbLB8Z9gp+J1hxycynjYrfVQNCJADMlQDqA1DS
 gncdaz0O1RVcQULndFu7EYyLvybUjFmr0Q1wrW7mOFbIQn7KVTNYJ9GUJjWwmYcI
 N9yw6H7FjNad0TA+5prXKvQj+iP6budedW9Ke3mvyhkePMKwvORX5I6aVKjL0vKo
 gjUKuZC2x75GxgiUwYIJwDOEQGkBySFtf7RGFBjJ7l73/r4kDH6X/kG5AQDB0l3e
 sTSgMTM8KbkNWdQsvATSEN0Tf4Z7UsuhAhKLihNmkt7YXaYXEtBu0xoKPR8y6Xbd
 ZkiGMxkpLUY=
 =SkMF
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.4-rc cycle

Here are fixes for omaps to deal with few regressions, and to fix
more boot time errors and warnings:

- The recent ti-sysc interconnect target module driver changes had
  incorrect clock bits for both clocks and dts that cause warnings

- For omap3-gta04, gpio changes caused the LCD to break a while back,
  and after discussing things the right fix is to set spi-cs-high

- Recent omapdrm changes to use generic panels caused tfp410 to be
  disabled as we now must enable the generic support for it in
  defconfig

- Recent omapdrm and backlight changes also finally made droid4 LCD
  to work, so let's enable it in the defconfig it can be used out
  of the box. This is not strictly a fix, but we still also have the
  older CONFIG_MFD_TI_LMU options available so this cuts down the
  confusion for trying to guess which display and which backlight
  is needed

- Recent ti-sysc interconnect target module changes need the gpio
  module disabled on some boards, but this now needs to happen at
  the module level, not at the gpio driver level

- Recent changes to probe system timers with ti-sysc caused warnings
  about mismatch in syconfig registers, so let's configure the option
  for RESET_STATUS as available in the TRMs

- Recent changes to probe LCDC with ti-sysc caused warnings about
  mismatch in sysconfig registers, so let's configure the missing
  idlemodes for both platform data and dts as documented in TRMs

- Since we moved mach-omap2 to probe with device tree, we've been
  getting voltage controller warnings. Turns out this code is no
  longer needed, so let's just remove omap2_set_init_voltage() to
  get rid of the pointless warnings

- Configure am4372 dispc memory bandwidth to avoid underflow errors

* tag 'omap-for-v5.4/fixes-rc1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Link: https://lore.kernel.org/r/pull-1570040410-308159@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-03 09:15:19 -07:00
Tony Lindgren dd8882a255 clk: ti: dra7: Fix mcasp8 clock bits
There's a typo for dra7 mcasp clkctrl bit, it should be 22 like the other
macasp instances, and not 24. And in dra7xx_clks[] we have the bits wrong
way around.

Fixes: dffa9051d5 ("clk: ti: dra7: add new clkctrl data")
Cc: linux-clk@vger.kernel.org
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-09-23 10:32:37 -07:00
Linus Torvalds 5c6bd5de3c Main MIPS changes for v5.4:
- boot_mem_map is removed, providing a nice cleanup made possible by the
   recent removal of bootmem.
 
 - Some fixes to atomics, in general providing compiler barriers for
   smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs or
   MIPS32 systems using cmpxchg64().
 
 - Conversion to the new generic VDSO infrastructure courtesy of Vincenzo
   Frascino.
 
 - Removal of undefined behavior in set_io_port_base(), fixing the
   behavior of some MIPS kernel configurations when built with recent
   clang versions.
 
 - Initial MIPS32 huge page support, functional on at least Ingenic SoCs.
 
 - pte_special() is now supported for some configurations, allowing among
   other things generic fast GUP to be used.
 
 - Miscellaneous fixes & cleanups.
 
 And platform specific changes:
 
 - Major improvements to Ingenic SoC support from Paul Cercueil, mostly
   enabled by the inclusion of the new TCU (timer-counter unit) drivers
   he's spent a very patient year or so working on. Plus some fixes for
   X1000 SoCs from Zhou Yanjie.
 
 - Netgear R6200 v1 systems are now supported by the bcm47xx platform.
 
 - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXYaqpRUccGF1bC5idXJ0
 b25AbWlwcy5jb20ACgkQPqefrLV1AN2JUQD+PQGFIlq9bo/3vLyqsXJffm+DhwVQ
 4WSCSeN5brPkO8EA/153sRJBlRtG+KK5p9f7WYKUuBfbcEawuc1uwmKuy7cG
 =lWlM
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
 "Main MIPS changes:

   - boot_mem_map is removed, providing a nice cleanup made possible by
     the recent removal of bootmem.

   - Some fixes to atomics, in general providing compiler barriers for
     smp_mb__{before,after}_atomic plus fixes specific to Loongson CPUs
     or MIPS32 systems using cmpxchg64().

   - Conversion to the new generic VDSO infrastructure courtesy of
     Vincenzo Frascino.

   - Removal of undefined behavior in set_io_port_base(), fixing the
     behavior of some MIPS kernel configurations when built with recent
     clang versions.

   - Initial MIPS32 huge page support, functional on at least Ingenic
     SoCs.

   - pte_special() is now supported for some configurations, allowing
     among other things generic fast GUP to be used.

   - Miscellaneous fixes & cleanups.

  And platform specific changes:

   - Major improvements to Ingenic SoC support from Paul Cercueil,
     mostly enabled by the inclusion of the new TCU (timer-counter unit)
     drivers he's spent a very patient year or so working on. Plus some
     fixes for X1000 SoCs from Zhou Yanjie.

   - Netgear R6200 v1 systems are now supported by the bcm47xx platform.

   - DT updates for BMIPS, Lantiq & Microsemi Ocelot systems"

* tag 'mips_5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (89 commits)
  MIPS: Detect bad _PFN_SHIFT values
  MIPS: Disable pte_special() for MIPS32 with RiXi
  MIPS: ralink: deactivate PCI support for SOC_MT7621
  mips: compat: vdso: Use legacy syscalls as fallback
  MIPS: Drop Loongson _CACHE_* definitions
  MIPS: tlbex: Remove cpu_has_local_ebase
  MIPS: tlbex: Simplify r3k check
  MIPS: Select R3k-style TLB in Kconfig
  MIPS: PCI: refactor ioc3 special handling
  mips: remove ioremap_cachable
  mips/atomic: Fix smp_mb__{before,after}_atomic()
  mips/atomic: Fix loongson_llsc_mb() wreckage
  mips/atomic: Fix cmpxchg64 barriers
  MIPS: Octeon: remove duplicated include from dma-octeon.c
  firmware: bcm47xx_nvram: Allow COMPILE_TEST
  firmware: bcm47xx_nvram: Correct size_t printf format
  MIPS: Treat Loongson Extensions as ASEs
  MIPS: Remove dev_err() usage after platform_get_irq()
  MIPS: dts: mscc: describe the PTP ready interrupt
  MIPS: dts: mscc: describe the PTP register range
  ...
2019-09-22 09:30:30 -07:00
Linus Torvalds f97c81dc6c ARM: SoC: late updates for v5.4
This is some material that we picked up into our tree late or
 that had complex inter-depondencies. The fact that there are these
 interdependencies tends to meant that these are often actually the most
 interesting new additions:
 
 The new Aspeed AST2600 baseboard management controller is added, this
 is a Cortex-A7 based follow-up to the ARM11 based AST2500 and had some
 dependencies on other device drivers.
 
 After many years, support for the MMP2 based OLPC XO-1.75 finally makes
 it into the kernel.
 
 The Armada 3720 based Turris Mox open source router platform is a late
 addition and it follows some preparatory work across multiple branches.
 
 The OMAP2+ platform had some large-scale cleanup involving driver
 changes and DT changes, here we finish it off, dropping a lot of the
 now-unused platform data.
 
 The TI K3 platform that got added for 5.3 gains a lot more support
 for individual bits on the SoC, this part just came late for the
 merge window.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6P3AAoJEJpsee/mABjZMFUP/i/J9CNJjEec0cWCG1XgP/qh
 SpKFf2g9Y9QzqAzDDovo7atTGHTCG8C0fn8W+bkv9h7dWj2uxRtFISM9COomUoHa
 0qXUL9bbDB3LAvstLV451p4c67XsJUazV9KZPD7VsCquucWbDDYaGPz+0reSRm6y
 imK2jXqD0leG0CNbgRXfh64J32TF3M0/XnwbsNJreCmQvwUvkYLL5VNi/qcnvfyp
 k0g1/5OzH9mLertoVKWqJ9o1919Yvxdl6/eyDmTPmX08bs03WnPbCEzRVO/zkOKZ
 O6RcAlsjiLblQdfbDJKfbaYDDaE53d2NwdCvBIdSPmDoYM5eYjQC4PmDM0+0dmHe
 bFd9giBjzU2Uab7ylgeoVl6pX1ISk6bwmZxNup45cy0xyw8wuky02Wq2bQTuZbgI
 UcBlOGWR4aH/OCpNafn+ovDBYGc64I7EQobG7UiilrVq/libx1Uo7yjlWSxe4j8n
 wFchiB8It24WUiS4JhJFrTklkaf5JW3K3czdDATW7aZKjv+fnHU5GMre/hvNP4z7
 qROlP69/eqNXG25VOcwWPQE8yhP43+ZgyvoVwDh1H6VZdy9WxgYyEoiBAhFfcrng
 +RVAT4rzylPmKP8oygVF1fpTHTS8xHrYBbjkdRaj5KqmTDdqI/nMsYoq+E0R1ScV
 EsnyNVq7wnvH12zrOv+I
 =Qtkp
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC late updates from Arnd Bergmann:
 "This is some material that we picked up into our tree late or that had
  complex inter-depondencies. The fact that there are these
  interdependencies tends to meant that these are often actually the
  most interesting new additions:

   - The new Aspeed AST2600 baseboard management controller is added,
     this is a Cortex-A7 based follow-up to the ARM11 based AST2500 and
     had some dependencies on other device drivers.

   - After many years, support for the MMP2 based OLPC XO-1.75 finally
     makes it into the kernel.

   - The Armada 3720 based Turris Mox open source router platform is a
     late addition and it follows some preparatory work across multiple
     branches.

   - The OMAP2+ platform had some large-scale cleanup involving driver
     changes and DT changes, here we finish it off, dropping a lot of
     the now-unused platform data.

   - The TI K3 platform that got added for 5.3 gains a lot more support
     for individual bits on the SoC, this part just came late for the
     merge window"

[ This pull request itself wasn't actually sent late at all by Arnd, but
  I waited on the branches that it used to be pulled first, so it ends
  up being merged much later than the other ARM SoC pull requests this
  merge window     - Linus ]

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits)
  ARM: dts: dir685: Drop spi-cpol from the display
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  ARM: exynos: Enable support for ARM architected timers
  ARM: samsung: Fix system restart on S3C6410
  ARM: dts: mmp2: add OLPC XO 1.75 machine
  ARM: dts: mmp2: rename the USB PHY node
  ARM: dts: mmp2: specify reg-shift for the UARTs
  ARM: dts: mmp2: add camera interfaces
  ARM: dts: mmp2: fix the SPI nodes
  ARM: dts: mmp2: trivial whitespace fix
  arm64: dts: marvell: add DTS for Turris Mox
  dt-bindings: marvell: document Turris Mox compatible
  arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
  arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
  arm64: dts: ti: k3-j721e-main: Add hwspinlock node
  arm64: dts: ti: k3-am65-main: Add hwspinlock node
  arm64: dts: k3-j721e: Add gpio-keys on common processor board
  dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
  ...
2019-09-20 15:53:02 -07:00
Linus Torvalds a703d279c5 We have a small collection of core framework updates this time, mostly around
clk registration by clk providers and debugfs "nice to haves" for rate
 constraints. I'll highlight that we're now setting the clk_init_data pointer
 inside struct clk_hw to NULL during clk_register(), which may break some
 drivers that thought they could use that pointer during normal operations. That
 change has been sitting in next for a while now but maybe something is still
 broken. We'l see. Other than that the core framework changes aren't invasive
 and they're fixing bugs, simplifying, and making things better.
 
 On the clk driver side we got the usual addition of new SoC support, new
 features for existing drivers, and bug fixes scattered throughout. The biggest
 diffstat is the Amlogic driver that gained CPU clk support in addition to
 migrating to the new way of specifying clk parents. After that the Qualcomm,
 i.MX, Mediatek, and Rockchip clk drivers got support for various new SoCs and
 clock controllers from those vendors.
 
 Core:
  - Drop NULL checks in clk debugfs
  - Add min/max rates to clk debugfs
  - Set clk_init_data pointer inside clk_hw to NULL after registration
  - Make clk_bulk_get_all() return an 'id' corresponding to clock-names
  - Evict parents from parent cache when they're unregistered
 
 New Drivers:
  - Add clock driver for i.MX8MN SoCs
  - Support aspeed AST2600 SoCs
  - Support for Mediatek MT6779 SoCs
  - Support qcom SM8150 GCC and RPMh clks
  - Support qcom QCS404 WCSS clks
  - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)
  - Addition of clock driver for Rockchip rk3308 SoCs
 
 Updates:
  - Add regulator support to the cdce925 clk driver
  - Add support for Raspberry Pi 4 bcm2711 SoCs
  - Add SDIO gate support to aspeed driver
  - Add missing of_node_put() calls in various clk drivers
  - Migrate Amlogic driver to new clock parent description method
  - Add DVFS support to Amlogic Meson g12
  - Add Amlogic Meson g12a reset support to the axg audio clock controller
  - Add sm1 support to the Amlogic Meson g12a clock controller
  - Switch i.MX8MM clock driver to platform driver
  - Add Hifi4 DSP related clocks for i.MX8QXP SoC
  - Fix Audio PLL setting and parent clock for USB
  - Misc i.MX8 clock driver improvements and corrections
  - Set floor ops for Qualcomm SD clks so that rounding works
  - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1
  - Enable the Allwinner V3 SoC and fix the i2s clock for H6
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl2FQEMRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSXHQw//XHnT5DPphpP8ua4x8wuJARdf0n58Vcdb
 8fZxxs4QN7uuKhg6aMI4kgwBn+9tgIr65hvN0Gn9Wm5Bsbs3XZvdIo7DvQDrYg7W
 NE7192iy2Dg+m+C24YLO7ceZgqVepbjeN+6oeUK88Ui+H+XlOKfJvjfnJ+HxN9Ip
 sHnLakIxqlaWvzwTUOHOcsrHyQD2OXupbfNMxLnmr8T/kBh/nqwNEG3aYCppICsg
 LpJL9Bv2V3QSk8uBszTgKK5ybWo14aDQPx4rrhgsneD0h7DSnx6M3jvngxMra6W0
 fnare4FQlkbPmgAj+XtB7RdCzsuwoke/7TJsvDLQrEbyOYTGnl7bYS8NOSrIg5Tp
 w4UPpXrMTQK7e/6okL1OJYAXXYurxep8QjsjpF3nahxC3IVzAZ9uio6ehJrDNEPC
 ErqOSPQTMkjOA2npovsQKCH3Mv/yGzAigpsQassPneWwp//NupMLKmmIm6645Xw2
 6kqSlVFYz81lhzIylGEQKIoiLcszpB6qqWUzGVt0B94joRbvg0m//8BDaZbHeTqP
 m/acRYHRC1utpkAZEnBZRsd79cI+EeuARROUfGsoUMfOueTc4+qQ7Yrjbj4rTvnC
 lLM9Qz9h1QkfyRF1IHHPw/fS5twpNTUdO9c1+3qzS3AQfl5dZWpChoF9Um+ycVPR
 nQrpk05pHEY=
 =z8wK
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "We have a small collection of core framework updates this time, mostly
  around clk registration by clk providers and debugfs "nice to haves"
  for rate constraints. I'll highlight that we're now setting the
  clk_init_data pointer inside struct clk_hw to NULL during
  clk_register(), which may break some drivers that thought they could
  use that pointer during normal operations. That change has been
  sitting in next for a while now but maybe something is still broken.
  We'l see. Other than that the core framework changes aren't invasive
  and they're fixing bugs, simplifying, and making things better.

  On the clk driver side we got the usual addition of new SoC support,
  new features for existing drivers, and bug fixes scattered throughout.
  The biggest diffstat is the Amlogic driver that gained CPU clk support
  in addition to migrating to the new way of specifying clk parents.
  After that the Qualcomm, i.MX, Mediatek, and Rockchip clk drivers got
  support for various new SoCs and clock controllers from those vendors.

  Core:
   - Drop NULL checks in clk debugfs
   - Add min/max rates to clk debugfs
   - Set clk_init_data pointer inside clk_hw to NULL after registration
   - Make clk_bulk_get_all() return an 'id' corresponding to clock-names
   - Evict parents from parent cache when they're unregistered

  New Drivers:
   - Add clock driver for i.MX8MN SoCs
   - Support aspeed AST2600 SoCs
   - Support for Mediatek MT6779 SoCs
   - Support qcom SM8150 GCC and RPMh clks
   - Support qcom QCS404 WCSS clks
   - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)
   - Addition of clock driver for Rockchip rk3308 SoCs

  Updates:
   - Add regulator support to the cdce925 clk driver
   - Add support for Raspberry Pi 4 bcm2711 SoCs
   - Add SDIO gate support to aspeed driver
   - Add missing of_node_put() calls in various clk drivers
   - Migrate Amlogic driver to new clock parent description method
   - Add DVFS support to Amlogic Meson g12
   - Add Amlogic Meson g12a reset support to the axg audio clock controller
   - Add sm1 support to the Amlogic Meson g12a clock controller
   - Switch i.MX8MM clock driver to platform driver
   - Add Hifi4 DSP related clocks for i.MX8QXP SoC
   - Fix Audio PLL setting and parent clock for USB
   - Misc i.MX8 clock driver improvements and corrections
   - Set floor ops for Qualcomm SD clks so that rounding works
   - Fix "always-on" Clock Domains on Renesas R-Car M1A, RZ/A1, RZ/A2, and RZ/N1
   - Enable the Allwinner V3 SoC and fix the i2s clock for H6"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (137 commits)
  clk: Drop !clk checks in debugfs dumping
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: mvebu: ap80x: add AP807 clock support
  clk: mvebu: ap806: Prepare the introduction of AP807 clock support
  clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
  clk: mvebu: ap806: be more explicit on what SaR is
  clk: mvebu: ap80x-cpu: add AP807 CPU clock support
  clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
  dt-bindings: ap806: Document AP807 clock compatible
  dt-bindings: ap80x: Document AP807 CPU clock compatible
  clk: sprd: add missing kfree
  clk: at91: allow 24 Mhz clock as input for PLL
  clk: Make clk_bulk_get_all() return a valid "id"
  clk: actions: Fix factor clk struct member access
  clk: qcom: rcg: Return failure for RCG update
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  ...
2019-09-20 15:45:07 -07:00
Stephen Boyd ebd47c8434 Merge branches 'clk-bulk-fix', 'clk-at91' and 'clk-sprd' into clk-next
- Make clk_bulk_get_all() return an 'id' corresponding to clock-names

* clk-bulk-fix:
  clk: Make clk_bulk_get_all() return a valid "id"

* clk-at91:
  clk: at91: allow 24 Mhz clock as input for PLL
  clk: at91: select parent if main oscillator or bypass is enabled
  clk: at91: fix update bit maps on CFG_MOR write

* clk-sprd:
  clk: sprd: add missing kfree
2019-09-19 15:31:59 -07:00
Stephen Boyd b6c444de05 Merge branches 'clk-cdce-regulator', 'clk-bcm', 'clk-evict-parent-cache' and 'clk-actions' into clk-next
- Add regulator support to the cdce925 clk driver
 - Add support for Raspberry Pi 4 bcm2711 SoCs
 - Evict parents from parent cache when they're unregistered

* clk-cdce-regulator:
  clk: clk-cdce925: Add regulator support
  dt-bindings: clock: cdce925: Add regulator documentation

* clk-bcm:
  clk: bcm2835: Mark PLLD_PER as CRITICAL
  clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
  clk: bcm2835: Introduce SoC specific clock registration
  dt-bindings: bcm2835-cprman: Add bcm2711 support

* clk-evict-parent-cache:
  clk: Evict unregistered clks from parent caches

* clk-actions:
  clk: actions: Fix factor clk struct member access
2019-09-19 15:31:46 -07:00
Stephen Boyd 91bcbc11d6 Merge branches 'clk-renesas', 'clk-rockchip', 'clk-const' and 'clk-simplify' into clk-next
* clk-renesas:
  clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain
  clk: renesas: r9a06g032: Set GENPD_FLAG_ALWAYS_ON for clock domain
  clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain
  dt-bindings: clk: emev2: Rename bindings documentation file
  clk: renesas: rcar-usb2-clock-sel: Use devm_platform_ioremap_resource() helper

* clk-rockchip:
  clk: rockchip: Add clock controller for the rk3308
  clk: rockchip: Add dt-binding header for rk3308
  dt-bindings: Add bindings for rk3308 clock controller
  clk: rockchip: Fix -Wunused-const-variable in rv1108 clk driver

* clk-const:
  clk: spear: Make structure i2s_sclk_masks constant

* clk-simplify:
  clk/ti: Use kmemdup rather than duplicating its implementation
  clk: fix devm_platform_ioremap_resource.cocci warnings
2019-09-19 15:31:41 -07:00
Stephen Boyd a1ff1ce300 Merge branches 'clk-init-destroy', 'clk-doc', 'clk-imx' and 'clk-allwinner' into clk-next
- Set clk_init_data pointer inside clk_hw to NULL after registration

* clk-init-destroy:
  clk: Overwrite clk_hw::init with NULL during clk_register()
  clk: sunxi: Don't call clk_hw_get_name() on a hw that isn't registered
  clk: ti: Don't reference clk_init_data after registration
  clk: qcom: Remove error prints from DFS registration
  rtc: sun6i: Don't reference clk_init_data after registration
  clk: zx296718: Don't reference clk_init_data after registration
  clk: milbeaut: Don't reference clk_init_data after registration
  clk: socfpga: deindent code to proper indentation
  phy: ti: am654-serdes: Don't reference clk_init_data after registration
  clk: sprd: Don't reference clk_init_data after registration
  clk: socfpga: Don't reference clk_init_data after registration
  clk: sirf: Don't reference clk_init_data after registration
  clk: qcom: Don't reference clk_init_data after registration
  clk: meson: axg-audio: Don't reference clk_init_data after registration
  clk: lochnagar: Don't reference clk_init_data after registration
  clk: actions: Don't reference clk_init_data after registration

* clk-doc:
  clk: remove extra ---help--- tags in Kconfig
  clk: add include guard to clk-conf.h
  clk: Document of_parse_clkspec() some more
  clk: Remove extraneous 'for' word in comments

* clk-imx: (32 commits)
  clk: imx: imx8mn: fix pll mux bit
  clk: imx: imx8mm: fix pll mux bit
  clk: imx: clk-pll14xx: unbypass PLL by default
  clk: imx: pll14xx: avoid glitch when set rate
  clk: imx: imx8mn: fix audio pll setting
  clk: imx8mn: Add necessary frequency support for ARM PLL table
  clk: imx8mn: Add missing rate_count assignment for each PLL structure
  clk: imx8mn: fix int pll clk gate
  clk: imx8mn: Add GIC clock
  clk: imx8mn: Fix incorrect parents
  clk: imx8mm: Fix incorrect parents
  clk: imx8mq: Fix sys3 pll references
  clk: imx8mq: Unregister clks when of_clk_add_provider failed
  clk: imx8mm: Unregister clks when of_clk_add_provider failed
  clk: imx8mq: Mark AHB clock as critical
  clk: imx8mn: Keep uart clocks on for early console
  clk: imx: Remove unused function statement
  clk: imx7ulp: Make sure earlycon's clock is enabled
  clk: imx8mm: Switch to platform driver
  clk: imx: imx8mm: fix audio pll setting
  ...

* clk-allwinner:
  clk: sunxi-ng: h6: Allow I2S to change parent rate
  clk: sunxi-ng: v3s: add Allwinner V3 support
  clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks
  dt-bindings: clk: sunxi-ccu: add compatible string for V3 CCU
  clk: sunxi-ng: v3s: add the missing PLL_DDR1
2019-09-19 15:31:27 -07:00
Stephen Boyd f5c7305db3 Merge branches 'clk-qcom', 'clk-mtk', 'clk-armada', 'clk-ingenic' and 'clk-meson' into clk-next
- Support qcom SM8150 RPMh clks
 - Set floor ops for qcom sd clks
 - Support qcom QCS404 WCSS clks
 - Support for Mediatek MT6779 SoCs
 - Add CPU clock support for Armada 7K/8K (specifically AP806 and AP807)

* clk-qcom:
  clk: qcom: rcg: Return failure for RCG update
  clk: qcom: fix QCS404 TuringCC regmap
  clk: qcom: clk-rpmh: Add support for SM8150
  dt-bindings: clock: Document SM8150 rpmh-clock compatible
  clk: qcom: clk-rpmh: Convert to parent data scheme
  dt-bindings: clock: Document the parent clocks
  clk: qcom: gcc: Use floor ops for SDCC clocks
  clk: qcom: gcc-qcs404: Use floor ops for sdcc clks
  clk: qcom: gcc-sdm845: Use floor ops for sdcc clks
  clk: qcom: define probe by index API as common API
  clk: qcom: Add WCSS gcc clock control for QCS404
  clk: qcom: msm8916: Don't build by default
  clk: qcom: gcc: Add global clock controller driver for SM8150
  dt-bindings: clock: Document gcc bindings for SM8150
  clk: qcom: clk-alpha-pll: Add support for Trion PLLs
  clk: qcom: clk-alpha-pll: Remove post_div_table checks
  clk: qcom: clk-alpha-pll: Remove unnecessary cast

* clk-mtk:
  clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider
  clk: mediatek: Register clock gate with device
  clk: mediatek: add pericfg clocks for MT8183
  dt-bindings: clock: mediatek: add pericfg for MT8183
  clk: mediatek: Add MT6779 clock support
  clk: mediatek: Add dt-bindings for MT6779 clocks
  dt-bindings: mediatek: bindings for MT6779 clk
  clk: reset: Modify reset-controller driver

* clk-armada:
  clk: mvebu: ap80x: add AP807 clock support
  clk: mvebu: ap806: Prepare the introduction of AP807 clock support
  clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
  clk: mvebu: ap806: be more explicit on what SaR is
  clk: mvebu: ap80x-cpu: add AP807 CPU clock support
  clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
  dt-bindings: ap806: Document AP807 clock compatible
  dt-bindings: ap80x: Document AP807 CPU clock compatible
  clk: mvebu: ap806: Fix clock name for the cluster
  clk: mvebu: add CPU clock driver for Armada 7K/8K
  clk: mvebu: add helper file for Armada AP and CP clocks
  dt-bindings: ap806: add the cluster clock node in the syscon file

* clk-ingenic:
  clk: ingenic: Use CLK_OF_DECLARE_DRIVER macro
  clk: ingenic/jz4740: Fix "pll half" divider not read/written properly

* clk-meson: (23 commits)
  clk: meson: g12a: add support for SM1 CPU 1, 2 & 3 clocks
  clk: meson: g12a: add support for SM1 DynamIQ Shared Unit clock
  clk: meson: g12a: add support for SM1 GP1 PLL
  dt-bindings: clk: meson: add sm1 periph clock controller bindings
  clk: meson: axg-audio: add g12a reset support
  dt-bindings: clock: meson: add resets to the audio clock controller
  clk: meson: g12a: expose CPUB clock ID for G12B
  clk: meson: g12a: add notifiers to handle cpu clock change
  clk: meson: add g12a cpu dynamic divider driver
  clk: core: introduce clk_hw_set_parent()
  clk: meson: remove clk input helper
  clk: meson: remove ee input bypass clocks
  clk: meson: clk-regmap: migrate to new parent description method
  clk: meson: meson8b: migrate to the new parent description method
  clk: meson: axg: migrate to the new parent description method
  clk: meson: gxbb: migrate to the new parent description method
  clk: meson: g12a: migrate to the new parent description method
  clk: meson: remove ao input bypass clocks
  clk: meson: axg-aoclk: migrate to the new parent description method
  clk: meson: gxbb-aoclk: migrate to the new parent description method
  ...
2019-09-19 15:30:59 -07:00
Stephen Boyd cee99529ee Merge branches 'clk-aspeed', 'clk-unused', 'clk-of-node-put', 'clk-const-bulk-data' and 'clk-debugfs' into clk-next
- Add SDIO gate to aspeed driver
 - Support aspeed AST2600 SoC
 - Add missing of_node_put() calls in various clk drivers
 - Drop NULL checks in clk debugfs
 - Add min/max rates to clk debugfs

* clk-aspeed:
  clk: Add support for AST2600 SoC
  clk: aspeed: Move structures to header
  clk: aspeed: Add SDIO gate

* clk-unused:
  clk: st: clkgen-pll: remove unused variable 'st_pll3200c32_407_a0'
  clk: st: clkgen-fsyn: remove unused variable 'st_quadfs_fs660c32_ops'
  clk: composite: Drop unused clk.h include
  clk: Si5341/Si5340: remove redundant assignment to n_den
  clk: qoriq: Fix -Wunused-const-variable

* clk-of-node-put:
  clk: ti: dm814x: Add of_node_put() to prevent memory leak
  clk: st: clk-flexgen: Add of_node_put() in st_of_flexgen_setup()
  clk: davinci: pll: Add of_node_put() in of_davinci_pll_init()
  clk: versatile: Add of_node_put() in cm_osc_setup()

* clk-const-bulk-data:
  clk: Constify struct clk_bulk_data * where possible

* clk-debugfs:
  clk: Drop !clk checks in debugfs dumping
  clk: Use seq_puts() in possible_parent_show()
  clk: Assert prepare_lock in clk_core_get_boundaries
  clk: Add clk_min/max_rate entries in debugfs
2019-09-19 15:30:40 -07:00
Stephen Boyd 7f4804665b clk: Drop !clk checks in debugfs dumping
These recursive functions have checks for !clk being passed in, but the
callers are always looping through lists and therefore the pointers
can't be NULL. Drop the checks to simplify the code.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190826234729.145593-1-sboyd@kernel.org
2019-09-19 15:26:36 -07:00
Linus Torvalds 6cfae0c26b Char/Misc driver patches for 5.4-rc1
Here is the big char/misc driver pull request for 5.4-rc1.
 
 As has been happening in previous releases, more and more individual
 driver subsystem trees are ending up in here.  Now if that is good or
 bad I can't tell, but hopefully it makes your life easier as it's more
 of an aggregation of trees together to one merge point for you.
 
 Anyway, lots of stuff in here:
 	- habanalabs driver updates
 	- thunderbolt driver updates
 	- misc driver updates
 	- coresight and intel_th hwtracing driver updates
 	- fpga driver updates
 	- extcon driver updates
 	- some dma driver updates
 	- char driver updates
 	- android binder driver updates
 	- nvmem driver updates
 	- phy driver updates
 	- parport driver fixes
 	- pcmcia driver fix
 	- uio driver updates
 	- w1 driver updates
 	- configfs fixes
 	- other assorted driver updates
 
 All of these have been in linux-next for a long time with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXYIT1g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym9lwCgrHZlMMvfYNVm6GQ5ge58JJsVTL4AoNatTcL4
 hfVMA6pCHWBjV65xVSf6
 =Tijw
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...
2019-09-18 11:14:31 -07:00
Peng Fan 60a8a148b2 clk: imx: imx8mn: fix pll mux bit
pll BYPASS bit should be kept inside pll driver for glitchless freq
setting following spec. If exposing the bit, that means pll driver and
clk driver has two paths to touch this bit, which is wrong.

So use EXT_BYPASS bit here.

And drop uneeded set parent, because EXT_BYPASS default is 0.

Suggested-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lkml.kernel.org/r/1568043491-20680-5-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:53:34 -07:00
Peng Fan 67315be33e clk: imx: imx8mm: fix pll mux bit
pll BYPASS bit should be kept inside pll driver for glitchless freq
setting following spec. If exposing the bit, that means pll driver and
clk driver has two paths to touch this bit, which is wrong.

So use EXT_BYPASS bit here.

And drop uneeded set parent, because EXT_BYPASS default is 0.

Fixes: ba5625c3e2 ("clk: imx: Add clock driver support for imx8mm")
Suggested-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lkml.kernel.org/r/1568043491-20680-4-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:53:34 -07:00
Peng Fan a9aa830607 clk: imx: clk-pll14xx: unbypass PLL by default
When registering the PLL, unbypass the PLL.
The PLL has two bypass control bit, BYPASS and EXT_BYPASS.
we will expose EXT_BYPASS to clk driver for mux usage, and keep
BYPASS inside pll14xx usage. The PLL has a restriction that
when M/P change, need to RESET/BYPASS pll to avoid glitch, so
we could not expose BYPASS.

To make it easy for clk driver usage, unbypass PLL which does
not hurt current function.

Fixes: 8646d4dcc7 ("clk: imx: Add PLLs driver for imx8mm soc")
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lkml.kernel.org/r/1568043491-20680-3-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:53:34 -07:00
Peng Fan dee1bc9c23 clk: imx: pll14xx: avoid glitch when set rate
According to PLL1443XA and PLL1416X spec,
"When BYPASS is 0 and RESETB is changed from 0 to 1, FOUT starts to
output unstable clock until lock time passes. PLL1416X/PLL1443XA may
generate a glitch at FOUT."

So set BYPASS when RESETB is changed from 0 to 1 to avoid glitch.
In the end of set rate, BYPASS will be cleared.

When prepare clock, also need to take care to avoid glitch. So
we also follow Spec to set BYPASS before RESETB changed from 0 to 1.
And add a check if the RESETB is already 0, directly return 0;

Fixes: 8646d4dcc7 ("clk: imx: Add PLLs driver for imx8mm soc")
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lkml.kernel.org/r/1568043491-20680-2-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:53:34 -07:00
Ben Peled c0448dce56 clk: mvebu: ap80x: add AP807 clock support
Add driver support for AP807 clock.

Signed-off-by: Ben Peled <bpeled@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-9-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:41 -07:00
Ben Peled be69e55df9 clk: mvebu: ap806: Prepare the introduction of AP807 clock support
Factor out the code that is only useful to AP806 so it will be easier
to support AP807. No functional changes.

Signed-off-by: Ben Peled <bpeled@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-8-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:41 -07:00
Omri Itach 0099dc446b clk: mvebu: ap806: add AP-DCLK (hclk) to system controller driver
Add dynamic AP-DCLK clock (hclk) to system controller driver. AP-DCLK
is half the rate of DDR clock, so its derrived from Sample At Reset
configuration. The clock frequency is required for AP806 AXI monitor
profiling feature.

Signed-off-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-7-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:41 -07:00
Miquel Raynal cd016cb018 clk: mvebu: ap806: be more explicit on what SaR is
"SaR" means Sample at Reset. DIP switches can be changed on the board,
their states at reset time is available through a register read.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-6-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:41 -07:00
Ben Peled 3b14e509ab clk: mvebu: ap80x-cpu: add AP807 CPU clock support
Enhance the ap-cpu-clk driver to support both AP806 and AP807 CPU
clocks.

Signed-off-by: Ben Peled <bpeled@marvell.com>
[<miquel.raynal@bootlin.com>: use device data instead of conditions on
the compatible]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-5-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:40 -07:00
Christine Gharzuzi a77f45eaa2 clk: mvebu: ap806-cpu: prepare mapping of AP807 CPU clock
This patch allows same flow to be executed on chips with different
register mappings like AP806 and, in the future, AP807.

Note: this patch has no functional effect, and only prepares the
driver for additional chips to be supported by retrieving the right
device data depenging on the compatible property.

Signed-off-by: Christine Gharzuzi <chrisg@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lkml.kernel.org/r/20190805100310.29048-4-miquel.raynal@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:15:40 -07:00
Chunyan Zhang 5e75ea9c67 clk: sprd: add missing kfree
The number of config registers for different pll clocks probably are not
same, so we have to use malloc, and should free the memory before return.

Fixes: 3e37b00558 ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lkml.kernel.org/r/20190905103009.27166-1-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:01:02 -07:00
Eugen Hristev 81a6b601f9 clk: at91: allow 24 Mhz clock as input for PLL
The PLL input range needs to be able to allow 24 Mhz crystal as input
Update the range accordingly in plla characteristics struct

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568183622-7858-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: c561e41ce4d2 ("clk: at91: add sama5d2 PMC driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 22:00:31 -07:00
Bjorn Andersson 7f81c24265 clk: Make clk_bulk_get_all() return a valid "id"
The adreno driver expects the "id" field of the returned clk_bulk_data
to be filled in with strings from the clock-names property.

But due to the use of kmalloc_array() in of_clk_bulk_get_all() it
receives a list of bogus pointers instead.

Zero-initialize the "id" field and attempt to populate with strings from
the clock-names property to resolve both these issues.

Fixes: 616e45df7c ("clk: add new APIs to operate on all available clocks")
Fixes: 8e3e791d20 ("drm/msm: Use generic bulk clock function")
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20190913024029.2640-1-bjorn.andersson@linaro.org
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 13:26:31 -07:00
Manivannan Sadhasivam ed309bfb48 clk: actions: Fix factor clk struct member access
Since the helper "owl_factor_helper_round_rate" is shared between factor
and composite clocks, using the factor clk specific helper function
like "hw_to_owl_factor" to access its members will create issues when
called from composite clk specific code. Hence, pass the "factor_hw"
struct pointer directly instead of fetching it using factor clk specific
helpers.

This issue has been observed when a composite clock like "sd0_clk" tried
to call "owl_factor_helper_round_rate" resulting in pointer dereferencing
error.

While we are at it, let's rename the "clk_val_best" function to
"owl_clk_val_best" since this is an owl SoCs specific helper.

Fixes: 4bb78fc974 ("clk: actions: Add factor clock support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190916154546.24982-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 12:54:44 -07:00
Taniya Das 21ea4b62e1 clk: qcom: rcg: Return failure for RCG update
In case of update config failure, return -EBUSY, so that consumers could
handle the failure gracefully.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:29:39 -07:00
Lubomir Rintel 863e53e6ed clk: remove extra ---help--- tags in Kconfig
Sometimes an extraneous "---help---" follows "help". That is probably a
copy&paste error stemming from their inconsistent use. Remove those.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lkml.kernel.org/r/20190822093126.594013-1-lkundrak@v3.sk
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:27:57 -07:00
Stephen Boyd bdcf1dc253 clk: Evict unregistered clks from parent caches
We leave a dangling pointer in each clk_core::parents array that has an
unregistered clk as a potential parent when that clk_core pointer is
freed by clk{_hw}_unregister(). It is impossible for the true parent of
a clk to be set with clk_set_parent() once the dangling pointer is left
in the cache because we compare parent pointers in
clk_fetch_parent_index() instead of checking for a matching clk name or
clk_hw pointer.

Before commit ede7785847 ("clk: Remove global clk traversal on fetch
parent index"), we would check clk_hw pointers, which has a higher
chance of being the same between registration and unregistration, but it
can still be allocated and freed by the clk provider. In fact, this has
been a long standing problem since commit da0f0b2c3a ("clk: Correct
lookup logic in clk_fetch_parent_index()") where we stopped trying to
compare clk names and skipped over entries in the cache that weren't
NULL.

There are good (performance) reasons to not do the global tree lookup in
cases where the cache holds dangling pointers to parents that have been
unregistered. Let's take the performance hit on the uncommon
registration path instead. Loop through all the clk_core::parents arrays
when a clk is unregistered and set the entry to NULL when the parent
cache entry and clk being unregistered are the same pointer. This will
fix this problem and avoid the overhead for the "normal" case.

Based on a patch by Bjorn Andersson.

Fixes: da0f0b2c3a ("clk: Correct lookup logic in clk_fetch_parent_index()")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
2019-09-17 10:24:02 -07:00
Weiyi Lu 327aa74156 clk: mediatek: Runtime PM support for MT8183 mcucfg clock provider
Enable the runtime PM support and forward the struct device pointer for
registration of MT8183 mcucfg clocks.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Link: https://lkml.kernel.org/r/1567414859-3244-3-git-send-email-weiyi.lu@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:22:49 -07:00
Weiyi Lu e4c23e19aa clk: mediatek: Register clock gate with device
Allow those clocks under a power domain to do the runtime pm operation
by forwarding the struct device pointer from clock provider.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Link: https://lkml.kernel.org/r/1567414859-3244-2-git-send-email-weiyi.lu@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:22:49 -07:00
Chunfeng Yun f9e55ac22c clk: mediatek: add pericfg clocks for MT8183
Add pericfg clocks for MT8183, it's used when support USB
remote wakeup

Cc: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lkml.kernel.org/r/1566980533-28282-2-git-send-email-chunfeng.yun@mediatek.com
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-17 10:17:41 -07:00
Stefan Wahren 5c5ba218c6 clk: bcm2835: Mark PLLD_PER as CRITICAL
The VPU firmware assume that the PLLD_PER isn't modified by the ARM core.
Otherwise this could cause firmware lookups. So mark the clock as critical
to avoid this.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17 09:55:31 -07:00
Stefan Wahren 42de9ad400 clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
The new BCM2711 supports an additional clock for the emmc2 block.
So add a new compatible and register this clock only for BCM2711.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17 09:55:31 -07:00
Stefan Wahren ee0a5a9013 clk: bcm2835: Introduce SoC specific clock registration
In order to support SoC specific clocks (e.g. emmc2 for BCM2711), we
extend the description with a SoC support flag. This approach avoids long
and mostly redundant lists of clock IDs. Since PLLH is specific to
BCM2835, we register only rest of the clocks as common to all SoC.

Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
2019-09-17 09:55:31 -07:00
Linus Torvalds cef7298262 ARM: DT updates for v5.4
This is another huge branch with close to 450 changessets related to
 devicetree files, roughly half of this for 32-bit and 64-bit respectively.
 There are lots of cleanups and additional hardware support for platforms
 we already support based on SoCs from Renesas, ST-Microelectronics,
 Intel/Altera, Rockchips, Allwinner, Broadcom and other manufacturers.
 
 A total of 6 new SoCs and 37 new boards gets added this time, one more
 SoC will come in a follow-up branch. Most of the new boards are for
 64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.
 
 Going more into details for SoC platforms with new hardware support:
 
 The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone platform,
 usually paired with an external 5G modem. So far we only support the
 Qualcomm SM8150 MTP reference platform, but no actual products.
 
 For the slightly older Qualcomm platforms, support for several interesting
 products is getting added: Three laptops based on Snapdragon 835/MSM8998
 (Asus NovaGo, HP Envy X2 and Lenovo Miix 630), one laptop based on
 Snapdragon 850/sdm850 (Lenovo Yoga C630) and several phones based on
 the older Snapdragon 410/MSM8916 (Samsung A3 and A5, Longcheer L8150
 aka Android One 2nd gen "seed" aka Wileyfox Swift).
 
 Mediatek MT7629 is a new wireless network router chip, similar to
 the older MT7623. It gets added together with the reference board
 implementation.
 
 Allwinner V3 is a repackaged version of the existing low-end V3s chip,
 and is used in the tiny Lichee Pi Zero plus, also added here.  There is
 also a new TV set-top box based on Allwinner H6, the Tanix TX6, and the
 eMMC variant of the Olimex A64-Olinuxino development board.
 
 NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC family,
 similar to the i.MX8M Mini. As usual, there is a large number of new
 boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML, SolidRun Hummingboard
 Pulse baseboard and System-on-Module, Boundary Devices i.MX8MQ Nitrogen8M,
 and TechNexion PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit,
 we get the Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
 phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
 Innovations i.MX7 RMU2 board.
 
 In a different NXP product line, the Layerscape LS1046A "Freeway"
 reference board gets added.
 
 Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from their
 set-top-box line and smart speaker with newer CPU and GPU cores compared
 to their predecessors. Both are now also supported by the Khadas VIM3
 development board series, and the dts files for that get reorganized a
 bit to better deal with all variants.  Another board based on SM1 that
 gets added is the SEI Robotics SEI610.
 
 There are a handful of new x86 and Power9 server boards using Aspeed BMC
 chips that are gaining support for running Linux on the BMC through the
 OpenBMC project: Facebook Minipack/Wedge100/Wedge40, Lenovo Hr855xg2,
 and Mihawk. Notably these are still new machines using SoCs based on
 the ARM9 and ARM11 CPU cores, as support for the new Cortex-A7 based
 AST2600 is still ramping up.
 
 There are three new end-user products using 32-bit Rockchips SoCs:
 Mecer Xtreme Mini S6 is an Android "mini PC" box based on the low-end
 RK3229 chip, while the two AOpen products Chromebox Mini (Fievel) and
 Chromebase Mini (Tiger) run ChromeOS and are meant for commercial settings
 (digital signage, PoS, ...).
 
 One more single-board computer based on the popular 64-bit RK3399 is
 added: the Leez RK3399 P710.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6StAAoJEJpsee/mABjZDfEP/3h0GusRkoQ6PJ5FHsj4nIR6
 NJK8RxmX4B4ctXxBc+Rbt8bHp1d/IdHL4Jcqe7xgR2OIVQPloJz1lFrLaF0wn4Mu
 G1EP2DzcLym3K0lBwhByvXfU1s2lhaTYdT594J8kTEVgcPXe79LKqH42A1T+1IlC
 7+xAh9sU++NLo64w+Iam3d3T72ugyeO7THWiie7Rb9wACS94i7cZwvasur35aHxf
 Ut5nOQYPbTuVVvN1FfZAdrHJpK9r7pbJLVwHLMdHnUYup2XDmoC6iuDrKlsWxqjs
 SBL0u+dO5pkdKQp17RZFQZwrx2Y97E9KLWaT9Cqb7nwJ+ftYf419TUioQvmyJRZd
 DEsCz6GVCCOs2zFcGj+9iGRr5wA2O3I42dOZkkkTciztksFwSmomrSlwAgVBT2ms
 In6K3g2DrN31aDGFW9dZnxBXHVHWXkqr/TN4UIO2h0jfR4bazAvPzBiDpJdkz1NY
 KPpDrdTRA2k4UnSimot/7Pw8y2NtsTDVJeQS1KydSe44PiLLumO8hg+FfnhJoW5s
 oaSjX89549JvUIrA7TbXPxpyGS8oo7a1XkQyzfWZs8l7JMWoR5oK/VdiuDBL7YDE
 XFlcZmCmB+kUgtSgXjw9FflkoMn06usVZBo1rnWFApYmzZ3htnniNSgz/zjMJpXn
 OtQTQnP2LzS+ioxqB2Se
 =Bm5T
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM DT updates from Arnd Bergmann:
 "This is another huge branch with close to 450 changessets related to
  devicetree files, roughly half of this for 32-bit and 64-bit
  respectively. There are lots of cleanups and additional hardware
  support for platforms we already support based on SoCs from Renesas,
  ST-Microelectronics, Intel/Altera, Rockchips, Allwinner, Broadcom and
  other manufacturers.

  A total of 6 new SoCs and 37 new boards gets added this time, one more
  SoC will come in a follow-up branch. Most of the new boards are for
  64-bit ARM SoCs, the others are typically for the 32-bit Cortex-A7.

  Going more into details for SoC platforms with new hardware support:

   - The Snapdragon 855 (SM8150) is Qualcomm's current high-end phone
     platform, usually paired with an external 5G modem. So far we only
     support the Qualcomm SM8150 MTP reference platform, but no actual
     products.

   - For the slightly older Qualcomm platforms, support for several
     interesting products is getting added: Three laptops based on
     Snapdragon 835/MSM8998 (Asus NovaGo, HP Envy X2 and Lenovo Miix
     630), one laptop based on Snapdragon 850/sdm850 (Lenovo Yoga C630)
     and several phones based on the older Snapdragon 410/MSM8916
     (Samsung A3 and A5, Longcheer L8150 aka Android One 2nd gen "seed"
     aka Wileyfox Swift).

   - Mediatek MT7629 is a new wireless network router chip, similar to
     the older MT7623. It gets added together with the reference board
     implementation.

   - Allwinner V3 is a repackaged version of the existing low-end V3s
     chip, and is used in the tiny Lichee Pi Zero plus, also added here.
     There is also a new TV set-top box based on Allwinner H6, the Tanix
     TX6, and the eMMC variant of the Olimex A64-Olinuxino development
     board.

   - NXP i.MX8M Nano is a new member of the ever-expanding i.MX SoC
     family, similar to the i.MX8M Mini. As usual, there is a large
     number of new boards for i.MX SoCs: Einfochips i.MX8QXP AI_ML,
     SolidRun Hummingboard Pulse baseboard and System-on-Module,
     Boundary Devices i.MX8MQ Nitrogen8M, and TechNexion
     PICO-PI-IMX8M-DEV for the 64-bit i.MX8 line. For 32-bit, we get the
     Kontron i.MX6UL N6310 SoM with two baseboards, the PHYTEC
     phyBOARD-Segin SoM with three baseboards, and the Zodiac Inflight
     Innovations i.MX7 RMU2 board.

   - In a different NXP product line, the Layerscape LS1046A "Freeway"
     reference board gets added.

   - Amlogic SM1 (S905X3) and G12B (S922X, A311D) are updated chips from
     their set-top-box line and smart speaker with newer CPU and GPU
     cores compared to their predecessors. Both are now also supported
     by the Khadas VIM3 development board series, and the dts files for
     that get reorganized a bit to better deal with all variants.
     Another board based on SM1 that gets added is the SEI Robotics
     SEI610.

   - There are a handful of new x86 and Power9 server boards using
     Aspeed BMC chips that are gaining support for running Linux on the
     BMC through the OpenBMC project: Facebook
     Minipack/Wedge100/Wedge40, Lenovo Hr855xg2, and Mihawk. Notably
     these are still new machines using SoCs based on the ARM9 and ARM11
     CPU cores, as support for the new Cortex-A7 based AST2600 is still
     ramping up.

   - There are three new end-user products using 32-bit Rockchips SoCs:
     Mecer Xtreme Mini S6 is an Android "mini PC" box based on the
     low-end RK3229 chip, while the two AOpen products Chromebox Mini
     (Fievel) and Chromebase Mini (Tiger) run ChromeOS and are meant for
     commercial settings(digital signage, PoS, ...).

   - One more single-board computer based on the popular 64-bit RK3399
     is added: the Leez RK3399 P710"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (467 commits)
  arm64: dts: qcom: Add Lenovo Yoga C630
  ARM: dts: aspeed-g5: Fixe gpio-ranges upper limit
  ARM; dts: aspeed: mihawk: File should not be executable
  ARM: dts: aspeed: swift: Change power supplies to version 2
  ARM: dts: aspeed: vesnin: Add secondary SPI flash chip
  ARM: dts: aspeed: vesnin: Add wdt2 with alt-boot option
  ARM: dts: aspeed-g4: Add all flash chips
  ARM: dts: exynos: Enable GPU/Mali T604 on Arndale board
  ARM: dts: exynos: Enable GPU/Mali T604 on Chromebook Snow
  ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250
  ARM: dts: exynos: Fix min/max buck4 for GPU on Arndale board
  ARM: dts: exynos: Mark LDO10 as always-on on Peach Pit/Pi Chromebooks
  ARM: dts: exynos: Remove not accurate secondary ADC compatible
  arm64: dts: rockchip: limit clock rate of MMC controllers for RK3328
  arm64: dts: meson-sm1-sei610: add stdout-path property back
  arm64: dts: meson-sm1-sei610: enable DVFS
  arm64: dts: khadas-vim3: add support for the SM1 based VIM3L
  dt-bindings: arm: amlogic: add Amlogic SM1 based Khadas VIM3L bindings
  arm64: dts: khadas-vim3: move common nodes into meson-khadas-vim3.dtsi
  arm64: dts: meson: g12a: add reset to tdm formatters
  ...
2019-09-16 15:56:22 -07:00
Linus Torvalds 399eb9b6cb ARM: SoC driver updates for v5.4
The branch contains driver changes that are tightly
 connected to SoC specific code. Aside from smaller
 cleanups and bug fixes, here is a list of the notable
 changes.
 
 New device drivers:
 
 - The Turris Mox router has a new "moxtet" bus driver
   for its on-board pluggable extension bus. The
   same platform also gains a firmware driver.
 
 - The Samsung Exynos family gains a new Chipid driver
   exporting using the soc device sysfs interface
 
 - A similar socinfo driver for Qualcomm Snapdragon
   chips.
 
 - A firmware driver for the NXP i.MX DSP IPC protocol
   using shared memory and a mailbox
 
 Other changes:
 
 - The i.MX reset controller driver now supports the
   NXP i.MX8MM chip
 
 - Amlogic SoC specific drivers gain support for
   the S905X3 and A311D chips
 
 - A rework of the TI Davinci framebuffer driver to
   allow important cleanups in the platform code
 
 - A couple of device drivers for removed ARM SoC
   platforms are removed. Most of the removals were
   picked up by other maintainers, this contains
   whatever was left.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdf6SUAAoJEJpsee/mABjZAfwP/01bXBOlGVusNH2zuh8IUSHb
 //5sTdWpwa2ugRekLOJUOjo2p9Fu70yH6xr4RUHI0rcRjZA0xR3bZPx45gI8LRHQ
 tfb25LaKqfgZjWMCJ8due1Lh7B6ffOQukryMtM/LoiCtqsy7b6aThEKaLpM9/Owl
 t53o4wKaVQJK5He9JQom9NOZidkl7tYLHmDQTOXhX2UEA/i45vtfjdsEBvoFPbTx
 +bYvlqs+SWlpDJk29j+oBOeKadPF+TFboLDiUCxH44MC3OsH51zjtKVBRTtbNMkb
 ek/ci5x9hCeHcYSEigNq2EMzEln09Yxyvjk8U/jLiJ1h1kz3p5MjqJbVMF1rYXpe
 ALuAwinM8Zv2o5/UOCkiQTWq79PtpOKHZKpNBXkaJ8kyqBLMSy8Fs3hCvXrDnjnQ
 TC8jX7UBqHRV2rbQIYehAQAxTvcRgTbqusQGLkUJInlux6go57LoMYHPABpHftJV
 kRdVeT0KzdCz1pvQwyekIog5hPLNTBi4jw6eQcOgeENvAea1MJa8lMMfKcVbIdS0
 ZVvxLl+K6noEKAv5lSeHAzjXq+cQFr3zDCsWy351mJETDHmE8zjsaHN1SgbRYLEk
 ZqzNwUYaPYBis38g85qaY/TSsJrWJ+jP8u7s9HTw3Oywg8SRy5vtW177s00/9VOd
 PYZ2UpqUeX8cdvggqUUU
 =lxFi
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "This contains driver changes that are tightly connected to SoC
  specific code. Aside from smaller cleanups and bug fixes, here is a
  list of the notable changes.

  New device drivers:

   - The Turris Mox router has a new "moxtet" bus driver for its
     on-board pluggable extension bus. The same platform also gains a
     firmware driver.

   - The Samsung Exynos family gains a new Chipid driver exporting using
     the soc device sysfs interface

   - A similar socinfo driver for Qualcomm Snapdragon chips.

   - A firmware driver for the NXP i.MX DSP IPC protocol using shared
     memory and a mailbox

  Other changes:

   - The i.MX reset controller driver now supports the NXP i.MX8MM chip

   - Amlogic SoC specific drivers gain support for the S905X3 and A311D
     chips

   - A rework of the TI Davinci framebuffer driver to allow important
     cleanups in the platform code

   - A couple of device drivers for removed ARM SoC platforms are
     removed. Most of the removals were picked up by other maintainers,
     this contains whatever was left"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
  bus: uniphier-system-bus: use devm_platform_ioremap_resource()
  soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
  dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
  firmware: ti_sci: Allow for device shared and exclusive requests
  bus: imx-weim: remove incorrect __init annotations
  fbdev: remove w90x900/nuc900 platform drivers
  spi: remove w90x900 driver
  net: remove w90p910-ether driver
  net: remove ks8695 driver
  firmware: turris-mox-rwtm: Add sysfs documentation
  firmware: Add Turris Mox rWTM firmware driver
  dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
  bus: moxtet: fix unsigned comparison to less than zero
  bus: moxtet: remove set but not used variable 'dummy'
  ARM: scoop: Use the right include
  dt-bindings: power: add Amlogic Everything-Else power domains bindings
  soc: amlogic: Add support for Everything-Else power domains controller
  fbdev: da8xx: use resource management for dma
  fbdev: da8xx-fb: drop a redundant if
  fbdev: da8xx-fb: use devm_platform_ioremap_resource()
  ...
2019-09-16 15:52:38 -07:00
Eugen Hristev 69a6bcde7f clk: at91: select parent if main oscillator or bypass is enabled
Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16 13:15:10 -07:00
Eugen Hristev 263eaf8f17 clk: at91: fix update bit maps on CFG_MOR write
The regmap update bits call was not selecting the proper mask, considering
the bits which was updating.
Update the mask from call to also include OSCBYPASS.
Removed MOSCEN which was not updated.

Fixes: 1bdf02326b ("clk: at91: make use of syscon/regmap internally")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16 13:15:01 -07:00
Arnd Bergmann 375a7baddb Merge branch 'aspeed/dt-3' into arm/late
* aspeed/dt-3:
  ARM: dts: aspeed: Add AST2600 pinmux nodes
  ARM: dts: aspeed: Add AST2600 and EVB
  clk: Add support for AST2600 SoC
  clk: aspeed: Move structures to header
  clk: aspeed: Add SDIO gate
2019-09-12 12:06:07 +02:00
mtk01761 710774e048 clk: mediatek: Add MT6779 clock support
Add MT6779 clock support, include topckgen, apmixedsys,
infracfg, and subsystem clocks.

Signed-off-by: mtk01761 <wendell.lin@mediatek.com>
Link: https://lkml.kernel.org/r/1566206502-4347-11-git-send-email-mars.cheng@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 09:37:30 -07:00
Jorge Ramirez-Ortiz 3bcff3e45b clk: qcom: fix QCS404 TuringCC regmap
The max register is 0x23004 as per the manual (the current
max_register that this commit is fixing is actually out of bounds).

Fixes: 892df0191b ("clk: qcom: Add QCS404 TuringCC")
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Link: https://lkml.kernel.org/r/20190909085430.8700-1-jorge.ramirez-ortiz@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 09:05:22 -07:00
Vinod Koul 2243fd4186 clk: qcom: clk-rpmh: Add support for SM8150
Add support for rpmh clocks found in SM8150

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20190826173120.2971-5-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:40:10 -07:00
Vinod Koul a64a9e5172 clk: qcom: clk-rpmh: Convert to parent data scheme
Convert the rpmh clock driver to use the new parent data scheme by
specifying the parent data for board clock.

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20190826173120.2971-3-vkoul@kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:40:10 -07:00
Taniya Das 3f905469c8 clk: qcom: gcc: Use floor ops for SDCC clocks
Update global clock controller SDCC2/4 clocks to use the floor rcg ops,
so as to use the rounded down clock rates for these clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lkml.kernel.org/r/20190909074410.18977-1-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:39:12 -07:00
Vinod Koul 593020811c clk: qcom: gcc-qcs404: Use floor ops for sdcc clks
Update the gcc qcs404 clock driver to use floor ops for sdcc clocks. As
disuccsed in [1] it is good idea to use floor ops for sdcc clocks as we
dont want the clock rates to do round up.

[1]: https://lore.kernel.org/linux-arm-msm/20190830195142.103564-1-swboyd@chromium.org/

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lkml.kernel.org/r/20190906045659.20621-1-vkoul@kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:38:22 -07:00
Stephen Boyd 5e4b7e82d4 clk: qcom: gcc-sdm845: Use floor ops for sdcc clks
Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.

Fixes: 06391eddb6 ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Reported-by: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-09 04:38:20 -07:00
Joel Stanley d3d04f6c33 clk: Add support for AST2600 SoC
The ast2600 is a new BMC SoC from ASPEED. It contains many more clocks
than the previous iterations, so support is broken out into it's own
driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20190825141848.17346-3-joel@jms.id.au
[sboyd@kernel.org: Mark arrays const]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-06 15:22:29 -07:00
Joel Stanley c1c4942eeb clk: aspeed: Move structures to header
They will be reused by the ast2600 driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lkml.kernel.org/r/20190825141848.17346-2-joel@jms.id.au
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-06 15:17:02 -07:00