Commit Graph

25 Commits

Author SHA1 Message Date
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Jeff Garzik 8676ce07d3 [libata] Bump versions
Update major version for libata, and several drivers.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-26 20:41:33 -04:00
Tejun Heo d7a80dad2f [PATCH] libata: convert several bmdma-style controllers to new EH, take #3
Convert sata_sis, svw, uli and vsc drivers to new EH.  All the drivers
used to specify ATA_FLAG_SATA_RESET to tell libata to use SATA
hardreset instead of SRST.  This patch makes all the converted drivers
use the standard bmdma error handler which uses both SRST and SATA
hardreset.

All the controllers should be able to perform SRST but still needs
verification.  If some of the controllers can't do SRST, it will be
very easy to spot as it will show up during boot probing.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-20 05:12:15 -04:00
Tejun Heo ccf68c3405 [PATCH] libata-hp: hook warmplug
Hook transportt->user_scan() and hostt->slave_destroy().

Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 18:28:09 +09:00
Alan Cox a6b2c5d475 [PATCH] PATCH: libata. Add ->data_xfer method
We need to pass the device in order to do per device checks such as
32bit I/O enables. With the changes to include dev->ap we now don't have
to add parameters however just clean them up. Also add data_xfer methods
to the existing drivers except ata_piix (which is in the other block of
patches). If you reject the piix one just add a data_xfer to it...

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-24 01:58:54 -04:00
Jeff Garzik 10a5fd5e6b Merge branch 'master'
Conflicts:

	drivers/scsi/libata-scsi.c
	include/linux/libata.h
2006-04-11 12:51:40 -04:00
Christoph Hellwig 9227c33de8 [PATCH] move ->eh_strategy_handler to the transport class
Overriding the whole EH code is a per-transport, not per-host thing.
Move ->eh_strategy_handler to the transport class, same as
->eh_timed_out.

Downside is that scsi_host_alloc can't check for the total lack of EH
anymore, but the transition period from old EH where we needed it is
long gone already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-10 14:15:47 -04:00
Jeff Garzik af64371ada [libata] bump versions 2006-04-02 20:41:36 -04:00
Jeff Garzik 50106c5a03 [libata sata_uli] kill scr_addr abuse
sata_uli was storing PCI config addresses in a variable intended for
port addresses, a variable soon to become void __iomem *.

Update the driver to store the SCR address, found in PCI config space,
in the driver-private data area.
2006-03-23 00:14:36 -05:00
Tejun Heo 30afc84cf7 [SCSI] libata: implement minimal transport template for ->eh_timed_out
SCSI midlayer has moved hostt->eh_timed_out to transport template.  As
libata doesn't need full-blown transport support yet, implement
minimal transport for libata.  No transport class or whatsoever, just
empty transport template with ->eh_timed_out hook.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-21 13:07:05 -06:00
Tejun Heo 49430f97dd [PATCH] libata: kill sht->max_sectors
The previous dev->max_sectors patch made sht->max_sectors meaningless.
Kill all initializations of sht->max_sectors.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 14:36:30 -05:00
Tejun Heo 35daeb8f9b [PATCH] libata: use ata_scsi_timed_out()
Make all libata low level drivers use ata_scsi_timed_out().

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 06:50:46 -05:00
Tejun Heo 93c9338713 [BLOCK] update libata to use new blk_ordered for barriers
Reflect changes in SCSI midlayer and updated to use new
ordered request implementation

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 09:55:00 +01:00
Jeff Garzik 3b7d697dfb [libata] constify PCI ID table in several drivers 2005-11-10 11:04:11 -05:00
Jeff Garzik 193515d51c [libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines 2005-11-07 00:59:37 -05:00
Jeff Garzik a9524a76f7 [libata] use dev_printk() throughout drivers
A few drivers were not following the standard meme of printing out
their driver name and version at module load time; this is fixed
as well.
2005-10-30 14:39:11 -05:00
Jeff Garzik 057ace5e79 libata: const-ification bombing run
Enforce access rules where appropriate.

If the compiler is smart enough, this may buy us an optimization or two
as a side effect.
2005-10-22 14:27:05 -04:00
Alan Cox 47a8659380 libata: bitmask based pci init functions for one or two ports
This redoes the n_ports logic I proposed before as a bitmask.
ata_pci_init_native_mode is now used with a mask allowing for mixed mode
stuff later on. ata_pci_init_legacy_port is called with port number and
does one port now not two. Instead it is called twice by the ata init
logic which cleans both of them up.

There are stil limits in the original code left over

- IRQ/port mapping for legacy mode should be arch specific values
- You can have one legacy mode IDE adapter per PCI root bridge on some systems
- Doesn't handle mixed mode devices yet (but is now a lot closer to it)
2005-10-04 08:09:19 -04:00
Brett M Russ a04ce0ffca [PATCH] PCI/libata INTx cleanup
Simple cleanup to eliminate X copies of the pci_enable_intx() function
in libata.  Moved ahci.c's pci_intx() to pci.c and use it throughout
libata and msi.c.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-08 15:07:08 -07:00
Brett Russ 7da7931283 [PATCH] libata: fix pio_mask values (take 2)
ata_get_mode_mask() uses bits 3 and 4 in the pio_mask to represent PIO
modes 3 and 4.  The value read from the drive, which reports support
for PIO3 and PIO4 in bits 0 and 1, is shifted left by 3 bits and OR'd
with 0x7 (which then corresponds to PIO 2-0 in libata).  Thus, the
drivers below need adjustments to comply with the way pio_mask is
used.  I changed the masks from the commented values to all support
PIO4-0, since the spec mandates that PIO0-2 are supported and there's
no reason not to support PIO3 IMO.

Signed-off-by: Brett Russ <russb@emc.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-07 01:54:54 -04:00
Jeff Garzik 70d374ea99 Merge /spare/repo/linux-2.6/ 2005-08-29 15:59:42 -04:00
Jeff Garzik af36d7f0df [libata] license change, other bits
- changes license of all code from OSL+GPL to plain ole GPL
  - except for NVIDIA, who hasn't yet responded about sata_nv
  - copyright holders were already contacted privately

- adds info in each driver about where hardware/protocol docs may be
  obtained

- where I have made major contributions, updated copyright dates
2005-08-28 20:18:39 -04:00
Jeff Garzik 8a60a07129 libata: trim trailing whitespace.
Also, fixup a tabs-to-spaces block of code in ata_piix.
2005-07-31 13:13:24 -04:00
Jeff Garzik aa8f0dc6c3 libata: Fix use-after-iounmap
Jens Axboe pointed out that the iounmap() call in libata was occurring
too early, and some drivers (ahci, probably others) were using ioremap'd
memory after it had been unmapped.

The patch should address that problem by way of improving the libata
driver API:

* move ->host_stop() call after all ->port_stop() calls have occurred.

* create default helper function ata_host_stop(), and move iounmap()
call there.

* add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark).
sata_qstor appears to require the host-stop-before-port-stop ordering
that existed prior to applying the attached patch.
2005-05-26 21:54:27 -04:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00