Trying to suspend/resume with console messages flying all around is
doomed to failure, when the devices that the messages are trying to
go to are being shut down.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
arm_timer() checks PF_EXITING to prevent BUG_ON(->exit_state)
in run_posix_cpu_timers().
However, for some reason it does so only for CPUCLOCK_PERTHREAD
case (which is imho wrong).
Also, this check is not reliable, PF_EXITING could be set on
another cpu without any locks/barriers just after the check,
so it can't prevent from attaching the timer to the exiting
task.
The previous patch makes this check unneeded.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_exit() clears ->it_##clock##_expires, but nothing prevents
another cpu to attach the timer to exiting process after that.
arm_timer() tries to protect against this race, but the check
is racy.
After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and
before do_exit() calls 'schedule() local timer interrupt can find
tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu
does sys_wait4) interrupted task has ->signal == NULL.
At this moment exiting task has no pending cpu timers, they were
cleanuped in __exit_signal()->posix_cpu_timers_exit{,_group}(),
so we can just return from irq.
John Stultz recently confirmed this bug, see
http://marc.theaimsgroup.com/?l=linux-kernel&m=115015841413687
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the local timer interrupt happens just after do_exit() sets PF_EXITING
(and before it clears ->it_xxx_expires) run_posix_cpu_timers() will call
check_process_timers() with tasklist_lock + ->siglock held and
check_process_timers:
t = tsk;
do {
....
do {
t = next_thread(t);
} while (unlikely(t->flags & PF_EXITING));
} while (t != tsk);
the outer loop will never stop.
Actually, the window is bigger. Another process can attach the timer
after ->it_xxx_expires was cleared (see the next commit) and the 'if
(PF_EXITING)' check in arm_timer() is racy (see the one after that).
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Modules that uses GPL symbols can no longer be build with kbuild,
the build will fail during the modpost step.
When a GPL-incompatible module uses a EXPORT_SYMBOL_GPL_FUTURE symbol
then warn during modpost so author are actually notified.
The actual license compatibility check is shared with the kernel
to make sure it is in sync.
Patch originally from: Andreas Gruenbacher <agruen@suse.de> and
Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
This new prctl is intended for changing the execution mode of the
processor, on processors that support both a little-endian mode and a
big-endian mode. It is intended for use by programs such as
instruction set emulators (for example an x86 emulator on PowerPC),
which may find it convenient to use the processor in an alternate
endianness mode when executing translated instructions.
Note that this does not imply the existence of a fully-fledged ABI for
both endiannesses, or of compatibility code for converting system
calls done in the non-native endianness mode. The program is expected
to arrange for all of its system call arguments to be presented in the
native endianness.
Switching between big and little-endian mode will require some care in
constructing the instruction sequence for the switch. Generally the
instructions up to the instruction that invokes the prctl system call
will have to be in the old endianness, and subsequent instructions
will have to be in the new endianness.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
From: Stephen Hemminger <shemminger@osdl.org>
I want to use the hrtimer's in the netem (Network Emulator) qdisc. But the
necessary symbols aren't exported for module use.
Also needed by SystemTap.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Stone, Joshua I" <joshua.i.stone@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reverts commit 5ce74abe78 (and its
dependent commit 8a5bc075b8), because of
audio underruns.
Reported by Rene Herman <rene.herman@keyaccess.nl>, who also pinpointed
the exact cause of the underruns:
"Audio underruns galore, with only ogg123 and firefox (browsing the
GIT tree online is also a nice trigger by the way).
If I back it out, everything is fine for me again."
Cc: Rene Herman <rene.herman@keyaccess.nl>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Under certain timing conditions, a race during boot occurs where timer
ticks are being processed on remote CPUs. The remote timer ticks can
increment jiffies, and if this happens during a window when a timeout is
very close to expiring but a local tick has not yet been delivered, you can
end up with
1) No softirq pending
2) A local timer wheel which is not synced to jiffies
3) No high resolution timer active
4) A local timer which is supposed to fire before the current jiffies value.
In this circumstance, the comparison in next_timer_interrupt overflows,
because the base of the comparison for high resolution timers is jiffies,
but for the softirq timer wheel, it is relative the the current base of the
wheel (jiffies_base).
Signed-off-by: Zachary Amsden <zach@vmware.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's too easy to incorrectly call cpuset_zone_allowed() in an atomic
context without __GFP_HARDWALL set, and when done, it is not noticed until
a tight memory situation forces allocations to be tried outside the current
cpuset.
Add a 'might_sleep_if()' check, to catch this earlier on, instead of
waiting for a similar check in the mutex_lock() code, which is only rarely
invoked.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update the kernel/cpuset.c:cpuset_zone_allowed() comment.
The rule for when mm/page_alloc.c should call cpuset_zone_allowed()
was intended to be:
Don't call cpuset_zone_allowed() if you can't sleep, unless you
pass in the __GFP_HARDWALL flag set in gfp_flag, which disables
the code that might scan up ancestor cpusets and sleep.
The explanation of this rule in the comment above cpuset_zone_allowed() was
stale, as a result of a restructuring of some __alloc_pages() code in
November 2005.
Rewrite that comment ...
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Even since a previous patch:
Fix race between CONFIG_DEBUG_SLABALLOC and modules
Sun, 27 Jun 2004 17:55:19 +0000 (17:55 +0000)
http://www.kernel.org/git/?p=linux/kernel/git/torvalds/old-2.6-bkcvs.git;a=commit;h=92b3db26d31cf21b70e3c1eadc56c179506d8fbe
The function symbol_put_addr() will deadlock the kernel.
symbol_put_addr() would acquire modlist_lock, then while holding the lock call
two functions kernel_text_address() and module_text_address() which also try
to acquire the same lock. This deadlocks the kernel of course.
This patch changes symbol_put_addr() to not acquire the modlist_lock, it
doesn't need it since it never looks at the module list directly. Also, it
now uses core_kernel_text() instead of kernel_text_address(). The latter has
an additional check for addr inside a module, but we don't need to do that
since we call module_text_address() (the same function kernel_text_address
uses) ourselves.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Cc: Zwane Mwaikambo <zwane@fsmlabs.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With "Paul E. McKenney" <paulmck@us.ibm.com>
Introduce rcu_needs_cpu() interface. This can be used to tell if there
will be a new rcu batch on a cpu soon by looking at the curlist pointer.
This can be used to avoid to enter a tickless idle state where the cpu
would miss that a new batch is ready when rcu_start_batch would be called
on a different cpu.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric Biederman points out that we can't take the task_lock while holding
tasklist_lock for writing, because another CPU that holds the task lock
might take an interrupt that then tries to take tasklist_lock for writing.
Which would be a nasty deadlock, with one CPU spinning forever in an
interrupt handler (although admittedly you need to really work at
triggering it ;)
Since the ptrace_attach() code is special and very unusual, just make it
be extra careful, and use trylock+repeat to avoid the possible deadlock.
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This holds the task lock (and, for ptrace_attach, the tasklist_lock)
over the actual attach event, which closes a race between attacking to a
thread that is either doing a PTRACE_TRACEME or getting de-threaded.
Thanks to Oleg Nesterov for reminding me about this, and Chris Wright
for noticing a lost return value in my first version.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While testing the watch performance, I noticed that selinux_task_ctxid()
was creeping into the results more than it should. Investigation showed
that the function call was being called whether it was needed or not. The
below patch fixes this.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
1) The audit_ipc_perms() function has been split into two different
functions:
- audit_ipc_obj()
- audit_ipc_set_perm()
There's a key shift here... The audit_ipc_obj() collects the uid, gid,
mode, and SElinux context label of the current ipc object. This
audit_ipc_obj() hook is now found in several places. Most notably, it
is hooked in ipcperms(), which is called in various places around the
ipc code permforming a MAC check. Additionally there are several places
where *checkid() is used to validate that an operation is being
performed on a valid object while not necessarily having a nearby
ipcperms() call. In these locations, audit_ipc_obj() is called to
ensure that the information is captured by the audit system.
The audit_set_new_perm() function is called any time the permissions on
the ipc object changes. In this case, the NEW permissions are recorded
(and note that an audit_ipc_obj() call exists just a few lines before
each instance).
2) Support for an AUDIT_IPC_SET_PERM audit message type. This allows
for separate auxiliary audit records for normal operations on an IPC
object and permissions changes. Note that the same struct
audit_aux_data_ipcctl is used and populated, however there are separate
audit_log_format statements based on the type of the message. Finally,
the AUDIT_IPC block of code in audit_free_aux() was extended to handle
aux messages of this new type. No more mem leaks I hope ;-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
The patch below builds upon the patch sent earlier and adds subject label to
all audit events generated via the netlink interface. It also cleans up a few
other minor things.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The below patch should be applied after the inode and ipc sid patches.
This patch is a reworking of Tim's patch that has been updated to match
the inode and ipc patches since its similar.
[updated:
> Stephen Smalley also wanted to change a variable from isec to tsec in the
> user sid patch. ]
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
The patch below converts IPC auditing to collect sid's and convert to context
string only if it needs to output an audit record. This patch depends on the
inode audit change patch already being applied.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Previously, we were gathering the context instead of the sid. Now in this patch,
we gather just the sid and convert to context only if an audit event is being
output.
This patch brings the performance hit from 146% down to 23%
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch provides the ability to filter audit messages based on the
elements of the process' SELinux context (user, role, type, mls sensitivity,
and mls clearance). It uses the new interfaces from selinux to opaquely
store information related to the selinux context and to filter based on that
information. It also uses the callback mechanism provided by selinux to
refresh the information when a new policy is loaded.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Add new SA_PROBEIRQ which suppresses the new sharing-mismatch warning.
Some drivers like to use request_irq() to find an unused interrupt slot.
- Use it in i82365.c
- Kill unused SA_PROBE.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There's an off-by-1 in kernel/power/main.c:state_store() ... if your
kernel just happens to have some non-zero data at pm_states[PM_SUSPEND_MAX]
(i.e. one past the end of the array) then it'll let you write anything you
want to /sys/power/state and in response the box will enter S5.
Signed-off-by: dean gaudet <dean@arctic.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Few of the notifier_chain_register() callers use __init in the definition
of notifier_call. It is incorrect as the function definition should be
available after the initializations (they do not unregister them during
initializations).
This patch fixes all such usages to _not_ have the notifier_call __init
section.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Few of the notifier_chain_register() callers use __devinitdata in the
definition of notifier_block data structure. It is incorrect as the
data structure should be available after the initializations (they do
not unregister them during initializations).
This was leading to an oops when notifier_chain_register() call is
invoked for those callback chains after initialization.
This patch fixes all such usages to _not_ have the notifier_block data
structure in the init data section.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Also switch it to use the same method of using off-tree nodes as
everyone else now does -- set them to point to themselves.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
In cases where a struct kretprobe's *_handler fields are non-NULL, it is
possible to cause a system crash, due to the possibility of calls ending up
in zombie functions. Documentation clearly states that unused *_handlers
should be set to NULL, but kprobe users sometimes fail to do so.
Fix it by setting the non-relevant fields of the struct kretprobe to NULL.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: Jim Keniston <jkenisto@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The function free_pagedir() used by swsusp for freeing its internal data
structures clears the PG_nosave and PG_nosave_free flags for each page
being freed.
However, during resume PG_nosave_free set means that the page in
question is "unsafe" (ie. it will be overwritten in the process of
restoring the saved system state from the image), so it should not be
used for the image data.
Therefore free_pagedir() should not clear PG_nosave_free if it's called
during resume (otherwise "unsafe" pages freed by it may be used for
storing the image data and the data may get corrupted later on).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While we can currently walk through thread groups, process groups, and
sessions with just the rcu_read_lock, this opens the door to walking the
entire task list.
We already have all of the other RCU guarantees so there is no cost in
doing this, this should be enough so that proc can stop taking the
tasklist lock during readdir.
prev_task was killed because it has no users, and using it will miss new
tasks when doing an rcu traversal.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Somehow in the midst of dotting i's and crossing t's during
the merge up to rc1 we wound up keeping __put_task_struct_cb
when it should have been killed as it no longer has any users.
Sorry I probably should have caught this while it was
still in the -mm tree.
Having the old code there gets confusing when reading
through the code and trying to understand what is
happening.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since the last user is removed in -mm, we can now remove this long deprecated
function.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This reverts most of commit 30e0fca6c1.
It broke the case of non-leader MT exec when ptraced.
I think the bug it was intended to fix was already addressed by commit
788e05a67c.
Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Commit e56d090310
[PATCH] RCU signal handling
made this BUG_ON() unsafe. This code runs under ->siglock,
while switch_exec_pids() takes tasklist_lock.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* 'splice' of git://brick.kernel.dk/data/git/linux-2.6-block:
[PATCH] vfs: add splice_write and splice_read to documentation
[PATCH] Remove sys_ prefix of new syscalls from __NR_sys_*
[PATCH] splice: warning fix
[PATCH] another round of fs/pipe.c cleanups
[PATCH] splice: comment styles
[PATCH] splice: add Ingo as addition copyright holder
[PATCH] splice: unlikely() optimizations
[PATCH] splice: speedups and optimizations
[PATCH] pipe.c/fifo.c code cleanups
[PATCH] get rid of the PIPE_*() macros
[PATCH] splice: speedup __generic_file_splice_read
[PATCH] splice: add direct fd <-> fd splicing support
[PATCH] splice: add optional input and output offsets
[PATCH] introduce a "kernel-internal pipe object" abstraction
[PATCH] splice: be smarter about calling do_page_cache_readahead()
[PATCH] splice: optimize the splice buffer mapping
[PATCH] splice: cleanup __generic_file_splice_read()
[PATCH] splice: only call wake_up_interruptible() when we really have to
[PATCH] splice: potential !page dereference
[PATCH] splice: mark the io page as accessed
Add a cpu_relax() to the hand-coded spinwait in hrtimer_cancel().
Signed-off-by: Joe Korty <joe.korty@ccur.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Implement the scheduled unexport of panic_timeout.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We need the boot CPU's tvec_bases[] entry to be initialised super-early in
boot, for early_serial_setup(). That runs within setup_arch(), before even
per-cpu areas are initialised.
The patch changes tvec_bases to use compile-time initialisation, and adds a
separate array `tvec_base_done' to keep track of which CPU has had its
tvec_bases[] entry initialised (because we can no longer use the zeroness of
that tvec_bases[] entry to determine whether it has been initialised).
Thanks to Eugene Surovegin <ebs@ebshome.net> for diagnosing this.
Cc: Eugene Surovegin <ebs@ebshome.net>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
For some architectures, a few syscalls are not linked in noMMU mode. In
that case, the MMU depending syscalls are needed to be defined as
'cond_syscall'. For example, ARM architecture selectively links sys_mlock
by the mode configuration.
In case of FRV, it has been managed by #ifdef CONFIG_MMU macro in
arch/frv/kernel/entry.S. However these conditional macros are just
duplicates if they were defined as cond_syscall. Compilation test is done
with FRV toolchains for both of MMU and noMMU mode.
Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
RT tasks are being awakened on the expired array when expired_starving() is
true, whereas they really should be excluded. Fix.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a starvation problem that occurs when a stream of highly interactive tasks
delay an array switch for extended periods despite EXPIRED_STARVING(rq) being
true. AFAIKT, the only choice is to enqueue awakening tasks on the expired
array in this case.
Without this patch, it can be nearly impossible to remotely login to a busy
server, and interactive shell commands can starve for minutes.
Also, convert the EXPIRED_STARVING macro into an inline function which humans
can understand.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Acked-by: Con Kolivas <kernel@kolivas.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It's more efficient for sendfile() emulation. Basically we cache an
internal private pipe and just use that as the intermediate area for
pages. Direct splicing is not available from sys_splice(), it is only
meant to be used for sendfile() emulation.
Additional patch from Ingo Molnar to avoid the PIPE_BUFFERS loop at
exit for the normal fast path.
Signed-off-by: Jens Axboe <axboe@suse.de>
If the HPET timer is enabled, the clock can drift by ~3 seconds a day.
This is due to the HPET timer not being initialized with the correct
setting (still using PIT count).
If HZ changes, this drift can become even more pronounced.
HPET patch initializes tick_nsec with correct tick_nsec settings for
HPET timer.
Vojtech comments:
"It's not entirely correct (it assumes the HPET ticks totally
exactly), but it's significantly better than assuming the PIT error
there."
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
I was grepping through the code and some `grep ganularity -R .` didn't
catch what I thought. Then looking closer I saw the term "granuality"
used in only four places (in comments) and granularity in many more
places describing the same idea. Some other facts:
dictionary.com does not know such a word
define:granuality on google is not found (and pages for granuality are
mostly related to patches to the kernel)
it has not been discussed as a term on LKML, AFAICS (=Can Search)
To be consistent, I think granularity should be used everywhere.
Signed-off-by: Kalin KOZHUHAROV <kalin@thinrope.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
The note that SOFTWARE_SUSPEND doesn't need APM is helpful, but nowadays
the information that it doesn't need ACPI, too, is even more helpful.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Wrong error path in dup_fd() - it should return NULL on error,
not an address of already freed memory :/
Triggered by OpenVZ stress test suite.
What is interesting is that it was causing different oopses in RCU like
below:
Call Trace:
[<c013492c>] rcu_do_batch+0x2c/0x80
[<c0134bdd>] rcu_process_callbacks+0x3d/0x70
[<c0126cf3>] tasklet_action+0x73/0xe0
[<c01269aa>] __do_softirq+0x10a/0x130
[<c01058ff>] do_softirq+0x4f/0x60
=======================
[<c0113817>] smp_apic_timer_interrupt+0x77/0x110
[<c0103b54>] apic_timer_interrupt+0x1c/0x24
Code: Bad EIP value.
<0>Kernel panic - not syncing: Fatal exception in interrupt
Signed-Off-By: Pavel Emelianov <xemul@sw.ru>
Signed-Off-By: Dmitry Mishin <dim@openvz.org>
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-Off-By: Linus Torvalds <torvalds@osdl.org>
Simplifies the code, reduces the need for 4 pid hash tables, and makes the
code more capable.
In the discussions I had with Oleg it was felt that to a large extent the
cleanup itself justified the work. With struct pid being dynamically
allocated meant we could create the hash table entry when the pid was
allocated and free the hash table entry when the pid was freed. Instead of
playing with the hash lists when ever a process would attach or detach to a
process.
For myself the fact that it gave what my previous task_ref patch gave for free
with simpler code was a big win. The problem is that if you hold a reference
to struct task_struct you lock in 10K of low memory. If you do that in a user
controllable way like /proc does, with an unprivileged but hostile user space
application with typical resource limits of 1000 fds and 100 processes I can
trigger the OOM killer by consuming all of low memory with task structs, on a
machine wight 1GB of low memory.
If I instead hold a reference to struct pid which holds a pointer to my
task_struct, I don't suffer from that problem because struct pid is 2 orders
of magnitude smaller. In fact struct pid is small enough that most other
kernel data structures dwarf it, so simply limiting the number of referring
data structures is enough to prevent exhaustion of low memory.
This splits the current struct pid into two structures, struct pid and struct
pid_link, and reduces our number of hash tables from PIDTYPE_MAX to just one.
struct pid_link is the per process linkage into the hash tables and lives in
struct task_struct. struct pid is given an indepedent lifetime, and holds
pointers to each of the pid types.
The independent life of struct pid simplifies attach_pid, and detach_pid,
because we are always manipulating the list of pids and not the hash table.
In addition in giving struct pid an indpendent life it makes the concept much
more powerful.
Kernel data structures can now embed a struct pid * instead of a pid_t and
not suffer from pid wrap around problems or from keeping unnecessarily
large amounts of memory allocated.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A big problem with rcu protected data structures that are also reference
counted is that you must jump through several hoops to increase the reference
count. I think someone finally implemented atomic_inc_not_zero(&count) to
automate the common case. Unfortunately this means you must special case the
rcu access case.
When data structures are only visible via rcu in a manner that is not
determined by the reference count on the object (i.e. tasks are visible until
their zombies are reaped) there is a much simpler technique we can employ.
Simply delaying the decrement of the reference count until the rcu interval is
over.
What that means is that the proc code that looks up a task and later
wants to sleep can now do:
rcu_read_lock();
task = find_task_by_pid(some_pid);
if (task) {
get_task_struct(task);
}
rcu_read_unlock();
The effect on the rest of the kernel is that put_task_struct becomes cheaper
and immediate, and in the case where the task has been reaped it frees the
task immediate instead of unnecessarily waiting an until the rcu interval is
over.
Cleanup of task_struct does not happen when its reference count drops to
zero, instead cleanup happens when release_task is called. Tasks can only
be looked up via rcu before release_task is called. All rcu protected
members of task_struct are freed by release_task.
Therefore we can move call_rcu from put_task_struct into release_task. And
we can modify release_task to not immediately release the reference count
but instead have it call put_task_struct from the function it gives to
call_rcu.
The end result:
- get_task_struct is safe in an rcu context where we have just looked
up the task.
- put_task_struct() simplifies into its old pre rcu self.
This reorganization also makes put_task_struct uncallable from modules as
it is not exported but it does not appear to be called from any modules so
this should not be an issue, and is trivially fixed.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This just got nuked in mainline. Bring it back because Eric's patches use it.
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The core problem: setsid fails if it is called by init. The effect in 2.6.16
and the earlier kernels that have this problem is that if you do a "ps -j 1 or
ps -ej 1" you will see that init and several of it's children have process
group and session == 0. Instead of process group == session == 1. Despite
init calling setsid.
The reason it fails is that daemonize calls set_special_pids(1,1) on kernel
threads that are launched before /sbin/init is called.
The only remaining effect in that current->signal->leader == 0 for init
instead of 1. And the setsid call fails. No one has noticed because
/sbin/init does not check the return value of setsid.
In 2.4 where we don't have the pidhash table, and daemonize doesn't exist
setsid actually works for init.
I care a lot about pid == 1 not being a special case that we leave broken,
because of the container/jail work that I am doing.
- Carefully allow init (pid == 1) to call setsid despite the kernel using
its session.
- Use find_task_by_pid instead of find_pid because find_pid taking a
pidtype is going away.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The futex timeval is not checked for correctness. The change does not
break existing applications as the timeval is supplied by glibc (and glibc
always passes a correct value), but the glibc-internal tests for this
functionality fail.
Signed-off-by: Thomas Gleixner <tglx@tglx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
To increase the strength of SCHED_BATCH as a scheduling hint we can
activate batch tasks on the expired array since by definition they are
latency insensitive tasks.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On runqueue time is used to elevate priority in schedule().
In the code it currently requeues tasks even if their priority is not
elevated, which would end up placing them at the end of their runqueue
array effectively delaying them instead of improving their priority.
Bug spotted by Mike Galbraith <efault@gmx.de>
This patch removes this requeueing.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Tasks waiting in SLEEP_NONINTERACTIVE state can now get to best priority so
they need to be included in the idle detection code.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We watch for tasks that sleep extended periods and don't allow one single
prolonged sleep period from elevating priority to maximum bonus to prevent cpu
bound tasks from getting high priority with single long sleeps. There is a
bug in the current code that also penalises tasks that already have high
priority. Correct that bug.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alterations to the pipe code in the kernel made it possible for relative
starvation to occur with tasks that slept waiting on a pipe getting unfair
priority bonuses even if they were otherwise fully cpu bound so the
TASK_NONINTERACTIVE flag was introduced which prevented any change to
sleep_avg while sleeping waiting on a pipe. This change also leads to the
converse though, preventing any priority boost from occurring in truly
interactive tasks that wait on pipes.
Convert the TASK_NONINTERACTIVE flag to set sleep_type to SLEEP_NONINTERACTIVE
which will allow a linear bonus to priority based on sleep time thus allowing
interactive tasks to get high priority if they sleep enough.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The activated flag in task_struct is used to track different sleep types and
its usage is somewhat obfuscated. Convert the variable to an enum with more
descriptive names without altering the function.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently, count_active_tasks() calls both nr_running() &
nr_interruptible(). Each of these functions does a "for_each_cpu" & reads
values from the runqueue of each cpu. Although this is not a lot of
instructions, each runqueue may be located on different node. Depending on
the architecture, a unique TLB entry may be required to access each
runqueue.
Since there may be more runqueues than cpu TLB entries, a scan of all
runqueues can trash the TLB. Each memory reference incurs a TLB miss &
refill.
In addition, the runqueue cacheline that contains nr_running &
nr_uninterruptible may be evicted from the cache between the two passes.
This causes unnecessary cache misses.
Combining nr_running() & nr_interruptible() into a single function
substantially reduces the TLB & cache misses on large systems. This should
have no measureable effect on smaller systems.
On a 128p IA64 system running a memory stress workload, the new function
reduced the overhead of calc_load() from 605 usec/call to 324 usec/call.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It seems that run_hrtimer_queue() is calling get_softirq_time() more
often than it needs to.
With this patch, it only calls get_softirq_time() if there's a
pending timer.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The removal of the data field in the hrtimer structure enforces the
embedding of the timer into another data structure. nanosleep now uses a
private implementation of the most common used timer callback function
(simple task wakeup).
In order to avoid the reimplentation of such functionality all over the
place a generic hrtimer_sleeper functionality is created.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
One of the LEDs driver files wants to use this.
Probably drivers/mtd/maps/ipaq-flash.c wants to convert as well - right now
it'll be tainting the kernel.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Bowler <jbowler@acm.org>
Cc: "'Richard Purdie'" <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix memory migration so that it works regardless of what cpuset the invoking
task is in.
If a task invoked a memory migration, by doing one of:
1) writing a different nodemask to a cpuset 'mems' file, or
2) writing a tasks pid to a different cpuset's 'tasks' file,
where the cpuset had its 'memory_migrate' option turned on, then the
allocation of the new pages for the migrated task(s) was constrained
by the invoking tasks cpuset.
If this task wasn't in a cpuset that allowed the requested memory nodes, the
memory migration would happen to some other nodes that were in that invoking
tasks cpuset. This was usually surprising and puzzling behaviour: Why didn't
the pages move? Why did the pages move -there-?
To fix this, temporarilly change the invoking tasks 'mems_allowed' task_struct
field to the nodes the migrating tasks is moving to, so that new pages can be
allocated there.
Signed-off-by: Paul Jackson <pj@sgi.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix unsafe reference to a tasks mm struct, by moving the reference inside of a
convenient nearby properly guarded code block.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix cpuset comment involving case of a tasks cpuset pointer being NULL.
Thanks to "the_top_cpuset_hack", this code no longer sees NULL task->cpuset
pointers.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I noticed a bug on the process accounting facility. In multi-threading
process, some data would be recorded incorrectly when the group_leader dies
earlier than one or more threads. The attached patch fixes this problem.
See below. 'bugacct' is a test program that create a worker thread after 4
seconds sleeping, then the group_leader dies soon. The worker thread
consume CPU/Memory for 6 seconds, then exit. We can estimate 10 seconds as
etime and 6 seconds as stime + utime. This is a sample program which the
group_leader dies earlier than other threads.
The results of same binary execution on different kernel are below.
-- accounted records --------------------
| btime | utime | stime | etime | minflt | majflt | comm |
original | 13:16:40 | 0.00 | 0.00 | 6.10 | 171 | 0 | bugacct |
patched | 13:20:21 | 5.83 | 0.18 | 10.03 | 32776 | 0 | bugacct |
(*) bugacct allocates 128MB memory, thus 128MB / 4KB = 32768 of minflt is
appropriate.
-- Test results in original kernel ------
$ date; time -p ./bugacct
Tue Mar 28 13:16:36 JST 2006 <- But pacct said btime is 13:16:40
real 10.11 <- But pacct said etime is 6.10
user 5.96 <- But pacct said utime is 0.00
sys 0.14 <- But pacct said stime is 0.00
$
-- Test results in patched kernel -------
$ date; time -p ./bugacct
Tue Mar 28 13:20:21 JST 2006
real 10.04
user 5.83
sys 0.19
$
In the original 2.6.16 kernel, pacct records btime, utime, stime, etime and
minflt incorrectly. In my opinion, this problem is caused by an assumption
that group_leader dies last.
The following section calculates process running time for etime and btime.
But it means running time of the thread that dies last, not process. The
start_time of the first thread in the process (group_leader) should be
reduced from uptime to calculate etime and btime correctly.
---- do_acct_process() in kernel/acct.c:
/* calculate run_time in nsec*/
do_posix_clock_monotonic_gettime(&uptime);
run_time = (u64)uptime.tv_sec*NSEC_PER_SEC + uptime.tv_nsec;
run_time -= (u64)current->start_time.tv_sec*NSEC_PER_SEC
+ current->start_time.tv_nsec;
----
The following section calculates stime and utime of the process.
But it might count the utime and stime of the group_leader duplicatly
and ignore the utime and stime of the thread dies last, when one or
more threads remain after group_leader dead.
The ac_utime should be calculated as the sum of the signal->utime
and utime of the thread dies last. The ac_stime should be done also.
---- do_acct_process() in kernel/acct.c:
jiffies = cputime_to_jiffies(cputime_add(current->group_leader->utime,
current->signal->utime));
ac.ac_utime = encode_comp_t(jiffies_to_AHZ(jiffies));
jiffies = cputime_to_jiffies(cputime_add(current->group_leader->stime,
current->signal->stime));
ac.ac_stime = encode_comp_t(jiffies_to_AHZ(jiffies));
----
The part of the minflt/majflt calculation has same problem.
This patch solves those problems, I think.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The boot cmdline is parsed in parse_early_param() and
parse_args(,unknown_bootoption).
And __setup() is used in obsolete_checksetup().
start_kernel()
-> parse_args()
-> unknown_bootoption()
-> obsolete_checksetup()
If __setup()'s callback (->setup_func()) returns 1 in
obsolete_checksetup(), obsolete_checksetup() thinks a parameter was
handled.
If ->setup_func() returns 0, obsolete_checksetup() tries other
->setup_func(). If all ->setup_func() that matched a parameter returns 0,
a parameter is seted to argv_init[].
Then, when runing /sbin/init or init=app, argv_init[] is passed to the app.
If the app doesn't ignore those arguments, it will warning and exit.
This patch fixes a wrong usage of it, however fixes obvious one only.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since base and new_base are of the same type now, we can save one 'if'
branch and simplify the code a bit.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Commit a4a6198b80:
[PATCH] tvec_bases too large for per-cpu data
introduced "struct tvec_t_base_s boot_tvec_bases" which is visible at
compile time. This means we can kill __init_timer_base and move
timer_base_s's content into tvec_t_base_s.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
strace /bin/bash misbehaves after resume; this fixes it.
(akpm: it's scary calling refrigerator() in state TASK_TRACED, but it seems to
do the right thing).
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
send_sigqueue() checks PF_EXITING, then locks p->sighand->siglock. This is
unsafe: 'p' can exit in between and set ->sighand = NULL. The race is
theoretical, the window is tiny and irqs are disabled by the caller, so I
don't think we need the fix for -stable tree.
Convert send_sigqueue() to use lock_task_sighand() helper.
Also, delete 'p->flags & PF_EXITING' re-check, it is unneeded and the
comment is wrong.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The previous patch has changed callsites of do_notify_parent_cldstop() so that
to_self == (->ptrace & PT_PTRACED) always (as it should be). We can remove
this parameter now.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove an obscure 'stop_count < 0' check in finish_stop(). The previous patch
made this case impossible.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_signal_stop() considers 'thread_group_empty()' as a special case.
This was needed to avoid taking tasklist_lock. Since this lock is
unneeded any longer, we can remove this special case and simplify
the code even more.
Also, before this patch, finish_stop() was called with stop_count == -1
for 'thread_group_empty()' case. This is not strictly wrong, but confusing
and unneeded.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: john stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move 'tsk->sighand = NULL' from cleanup_sighand() to __exit_signal(). This
makes the exit path more understandable and allows us to do
cleanup_sighand() outside of ->siglock protected section.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Eric W. Biederman wrote:
>
> Ok. SUSV3/Posix is clear, fork is atomic with respect
> to signals. Either a signal comes before or after a
> fork but not during. (See the rationale section).
> http://www.opengroup.org/onlinepubs/000095399/functions/fork.html
>
> The tasklist_lock does not stop forks from adding to a process
> group. The forks stall while the tasklist_lock is held, but a fork
> that began before we grabbed the tasklist_lock simply completes
> afterwards, and the child does not receive the signal.
This also means that SIGSTOP or sig_kernel_coredump() signal can't
be delivered to pgrp/session reliably.
With this patch copy_process() returns -ERESTARTNOINTR when it
detects a pending signal, fork() will be restarted transparently
after handling the signals.
This patch also deletes now unneeded "group_stop_count > 0" check,
copy_process() can no longer succeed while group stop in progress.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch kills PIDTYPE_TGID pid_type thus saving one hash table in
kernel/pid.c and speeding up subthreads create/destroy a bit. It is also a
preparation for the further tref/pids rework.
This patch adds 'struct list_head thread_group' to 'struct task_struct'
instead.
We don't detach group leader from PIDTYPE_PID namespace until another
thread inherits it's ->pid == ->tgid, so we are safe wrt premature
free_pidmap(->tgid) call.
Currently there are no users of find_task_by_pid_type(PIDTYPE_TGID).
Should the need arise, we can use find_task_by_pid()->group_leader.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-By: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_sigaction() does not need tasklist_lock anymore, we can simplify the code.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
do_signal_stop() does not need tasklist_lock anymore. So it does not need to
do misc re-checks, and we can simplify the code.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
handle_stop_signal() does not need tasklist_lock for SIG_KERNEL_STOP_MASK
signals anymore.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch moves __unhash_process() call from realease_task() to
__exit_signal(), so __detach_pid() is called with ->siglock held.
This means we don't need tasklist_lock to iterate over thread group anymore:
copy_process() was already changed to do attach_pid()
under ->siglock.
Eric's "pidhash-kill-switch_exec_pids.patch" from -mm
changed de_thread() so it doesn't touch PIDTYPE_TGID.
NOTE: de_thread() still needs some attention. It still changes task->pid
lockless. Taking ->sighand.siglock here allows to do more tasklist_lock
removals.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch reverts 'CONFIG_SMP && thread_group_empty()' optimization in
sys_times(). The reason is that the next patch breaks memory ordering which
is needed for that optimization.
tasklist_lock in sys_times() will be eliminated completely by further patch.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
__exit_signal() is private to release_task() now. I think it is better to
make it static in kernel/exit.c and export flush_sigqueue() instead - this
function is much more simple and straightforward.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Cosmetic, rename __exit_sighand to cleanup_sighand and move it close to
copy_sighand().
This matches copy_signal/cleanup_signal naming, and I think it is easier to
follow.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
__exit_signal() does important cleanups atomically under ->siglock. It is
also called from copy_process's error path. This is not good, for example we
can't move __unhash_process() under ->siglock for that reason.
We should not mix these 2 paths, just look at ugly 'if (p->sighand)' under
'bad_fork_cleanup_sighand:' label. For copy_process() case it is sufficient
to just backout copy_signal(), nothing more.
Again, nobody can see this task yet. For CLONE_THREAD case we just decrement
signal->count, otherwise nobody can see this ->signal and we can free it
lockless.
This patch assumes it is safe to do exit_thread_group_keys() without
tasklist_lock.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The only caller of exit_sighand(tsk) is copy_process's error path. We can
call __exit_sighand() directly and kill exit_sighand().
This 'tsk' was not yet registered in pid_hash[] or init_task.tasks, it has no
external references, nobody can see it, and
IF (clone_flags & CLONE_SIGHAND)
At least 'current' has a reference to ->sighand, this
means atomic_dec_and_test(sighand->count) can't be true.
ELSE
Nobody can see this ->sighand, this means we can free it
without any locking.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
In my opinion this patch cleans up the code.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add lock_task_sighand() helper and converts group_send_sig_info() to use
it. Hopefully we will have more users soon.
This patch also removes '!sighand->count' and '!p->usage' checks, I think
they both are bogus, racy and unneeded (but probably it makes sense to
restore them as BUG_ON()s).
->sighand is cleared and it's ->count is decremented in release_task() with
sighand->siglock held, so it is a bug to have '!p->usage || !->count' after
we already locked and verified it is the same. On the other hand, an
already dead task without ->sighand can have a non-zero ->usage due to
ptrace, for example.
If we read the stale value of ->sighand we must see the change after
spin_lock(), because that change was done while holding that same old
->sighand.siglock.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch borrows a clever Hugh's 'struct anon_vma' trick.
Without tasklist_lock held we can't trust task->sighand until we locked it
and re-checked that it is still the same.
But this means we don't need to defer 'kmem_cache_free(sighand)'. We can
return the memory to slab immediately, all we need is to be sure that
sighand->siglock can't dissapear inside rcu protected section.
To do so we need to initialize ->siglock inside ctor function,
SLAB_DESTROY_BY_RCU does the rest.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use ptrace_unlink() instead of open-coding. No changes in kernel/exit.o
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use remove_parent/add_parent instead of open coding.
No changes in kernel/exit.o
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
fork_idle() does unhash_process() just after copy_process(). Contrary,
boot_cpu's idle thread explicitely registers itself for each pid_type with nr
= 0.
copy_process() already checks p->pid != 0 before process_counts++, I think we
can just skip attach_pid() calls and job control inits for idle threads and
kill unhash_process(). We don't need to cleanup ->proc_dentry in fork_idle()
because with this patch idle threads are never hashed in
kernel/pid.c:pid_hash[].
We don't need to hash pid == 0 in pidmap_init(). free_pidmap() is never
called with pid == 0 arg, so it will never be reused. So it is still possible
to use pid == 0 in any PIDTYPE_xxx namespace from kernel/pid.c's POV.
However with this patch we don't hash pid == 0 for PIDTYPE_PID case. We still
have have PIDTYPE_PGID/PIDTYPE_SID entries with pid == 0: /sbin/init and
kernel threads which don't call daemonize().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Both SET_LINKS() and SET_LINKS/REMOVE_LINKS() have exactly one caller, and
these callers already check thread_group_leader().
This patch kills theese macros, they mix two different things: setting
process's parent and registering it in init_task.tasks list. Callers are
updated to do these actions by hand.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There are places where kernel uses REMOVE_LINKS/SET_LINKS while changing
process's ->parent. Use add_parent/remove_parent instead, they don't abuse
of global process list.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
add_parent(p, parent) is always called with parent == p->parent, and it makes
no sense to do it differently. This patch removes this argument.
No changes in affected .o files.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
'child_reaper' arg is not used in choose_new_parent().
"->exit_state >= EXIT_ZOMBIE" check is a leftover, was
valid when EXIT_ZOMBIE lived in ->state var.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
switch_exec_pids is only called from de_thread by way of exec, and it is
only called when we are exec'ing from a non thread group leader.
Currently switch_exec_pids gives the leader the pid of the thread and
unhashes and rehashes all of the process groups. The leader is already in
the EXIT_DEAD state so no one cares about it's pids. The only concern for
the leader is that __unhash_process called from release_task will function
correctly. If we don't touch the leader at all we know that
__unhash_process will work fine so there is no need to touch the leader.
For the task becomming the thread group leader, we just need to give it the
pid of the old thread group leader, add it to the task list, and attach it
to the session and the process group of the thread group.
Currently de_thread is also adding the task to the task list which is just
silly.
Currently the only leader of __detach_pid besides detach_pid is
switch_exec_pids because of the ugly extra work that was being
performed.
So this patch removes switch_exec_pids because it is doing too much, it is
creating an unnecessary special case in pid.c, duing work duplicated in
de_thread, and generally obscuring what it is going on.
The necessary work is added to de_thread, and it seems to be a little
clearer there what is going on.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Kirill Korotaev <dev@sw.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After looking at the problem of init calling exec some more I figured out
an easy way to make the code work.
The actual symptom without out this patch is that all threads will die
except pid == 1, and the thread calling exec. The thread calling exec will
wait forever for pid == 1 to die.
Since pid == 1 does not install a handler for SIGKILL it will never die.
This modifies the tests for init from current->pid == 1 to the equivalent
current == child_reaper. And then it causes exec in the ugly case to
modify child_reaper.
The only weird symptom is that you wind up with an init process that
doesn't have the oldest start time on the box.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kernel/futex_compat.c: In function `compat_sys_futex':
kernel/futex_compat.c:140: warning: passing arg 1 of `do_futex' makes integer from pointer without a cast
kernel/futex_compat.c:140: warning: passing arg 5 of `do_futex' makes integer from pointer without a cast
Not sure what Ingo was thinking of here. Put the casts back in.
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since dash2underscore() just operates and returns chars, I guess its safe
to change the return value to a char. With my .config, this reduces its
size by 5 bytes.
text data bss dec hex filename
4155 152 0 4307 10d3 params.o.orig
4150 152 0 4302 10ce params.o
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
gcc-4.2:
kernel/module.c: In function '__find_symbol':
kernel/module.c:158: warning: the address of '__start___kcrctab', will always evaluate as 'true'
kernel/module.c:165: warning: the address of '__start___kcrctab_gpl', will always evaluate as 'true'
kernel/module.c:182: warning: the address of '__start___kcrctab_gpl_future', will always evaluate as 'true'
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The kernel's implementation of notifier chains is unsafe. There is no
protection against entries being added to or removed from a chain while the
chain is in use. The issues were discussed in this thread:
http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2
We noticed that notifier chains in the kernel fall into two basic usage
classes:
"Blocking" chains are always called from a process context
and the callout routines are allowed to sleep;
"Atomic" chains can be called from an atomic context and
the callout routines are not allowed to sleep.
We decided to codify this distinction and make it part of the API. Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name). New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain. The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.
With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed. For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections. (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)
There are some limitations, which should not be too hard to live with. For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem. Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain. (This did happen in a couple of places and the code
had to be changed to avoid it.)
Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization. Instead we use RCU. The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.
Here is the list of chains that we adjusted and their classifications. None
of them use the raw API, so for the moment it is only a placeholder.
ATOMIC CHAINS
-------------
arch/i386/kernel/traps.c: i386die_chain
arch/ia64/kernel/traps.c: ia64die_chain
arch/powerpc/kernel/traps.c: powerpc_die_chain
arch/sparc64/kernel/traps.c: sparc64die_chain
arch/x86_64/kernel/traps.c: die_chain
drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list
kernel/panic.c: panic_notifier_list
kernel/profile.c: task_free_notifier
net/bluetooth/hci_core.c: hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain
net/ipv6/addrconf.c: inet6addr_chain
net/netfilter/nf_conntrack_core.c: nf_conntrack_chain
net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain
net/netlink/af_netlink.c: netlink_chain
BLOCKING CHAINS
---------------
arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain
arch/s390/kernel/process.c: idle_chain
arch/x86_64/kernel/process.c idle_notifier
drivers/base/memory.c: memory_chain
drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list
drivers/macintosh/adb.c: adb_client_list
drivers/macintosh/via-pmu.c sleep_notifier_list
drivers/macintosh/via-pmu68k.c sleep_notifier_list
drivers/macintosh/windfarm_core.c wf_client_list
drivers/usb/core/notify.c usb_notifier_list
drivers/video/fbmem.c fb_notifier_list
kernel/cpu.c cpu_chain
kernel/module.c module_notify_list
kernel/profile.c munmap_notifier
kernel/profile.c task_exit_notifier
kernel/sys.c reboot_notifier_list
net/core/dev.c netdev_chain
net/decnet/dn_dev.c: dnaddr_chain
net/ipv4/devinet.c: inetaddr_chain
It's possible that some of these classifications are wrong. If they are,
please let us know or submit a patch to fix them. Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)
The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.
[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- fix: initialize the robust list(s) to NULL in copy_process.
- doc update
- cleanup: rename _inuser to _inatomic
- __user cleanups and other small cleanups
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
32-bit syscall compatibility support. (This patch also moves all futex
related compat functionality into kernel/futex_compat.c.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the core infrastructure for robust futexes: structure definitions, the new
syscalls and the do_exit() based cleanup mechanism.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Current sched groups power calculation for allnodes_domains is wrong. We
should really be using cumulative power of the physical packages in that
group (similar to the calculation in node_domains)
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a new sched domain for representing multi-core with shared caches
between cores. Consider a dual package system, each package containing two
cores and with last level cache shared between cores with in a package. If
there are two runnable processes, with this appended patch those two
processes will be scheduled on different packages.
On such systems, with this patch we have observed 8% perf improvement with
specJBB(2 warehouse) benchmark and 35% improvement with CFP2000 rate(with 2
users).
This new domain will come into play only on multi-core systems with shared
caches. On other systems, this sched domain will be removed by domain
degeneration code. This new domain can be also used for implementing power
savings policy (see OLS 2005 CMP kernel scheduler paper for more details..
I will post another patch for power savings policy soon)
Most of the arch/* file changes are for cpu_coregroup_map() implementation.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
drivers/char/ftape/lowlevel/fdc-io.c: Correct a comment
Kconfig help: MTD_JEDECPROBE already supports Intel
Remove ugly debugging stuff
do_mounts.c: Minor ROOT_DEV comment cleanup
BUG_ON() Conversion in drivers/s390/block/dasd_devmap.c
BUG_ON() Conversion in mm/mempool.c
BUG_ON() Conversion in mm/memory.c
BUG_ON() Conversion in kernel/fork.c
BUG_ON() Conversion in ipc/sem.c
BUG_ON() Conversion in fs/ext2/
BUG_ON() Conversion in fs/hfs/
BUG_ON() Conversion in fs/dcache.c
BUG_ON() Conversion in fs/buffer.c
BUG_ON() Conversion in input/serio/hp_sdc_mlc.c
BUG_ON() Conversion in md/dm-table.c
BUG_ON() Conversion in md/dm-path-selector.c
BUG_ON() Conversion in drivers/isdn
BUG_ON() Conversion in drivers/char
BUG_ON() Conversion in drivers/mtd/
When kretprobe probes the schedule() function, if the probed process exits
then schedule() will never return, so some kretprobe instances will never
be recycled.
In this patch the parent process will recycle retprobe instances of the
probed function and there will be no memory leak of kretprobe instances.
Signed-off-by: bibo mao <bibo.mao@intel.com>
Cc: Masami Hiramatsu <hiramatu@sdl.hitachi.co.jp>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The nanosleep cleanup allows to remove the data field of hrtimer. The
callback function can use container_of() to get it's own data. Since the
hrtimer structure is anyway embedded in other structures, this adds no
overhead.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nsec_t predates ktime_t and has mostly been superseded by it. In the few
places that are left it's better to make it explicit that we're dealing with
64 bit values here.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the state field and encode this information in the rb_node similiar to
normal timer.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
nanosleep is the only user of the expired state, so let it manage this itself,
which makes the hrtimer code a bit simpler. The remaining time is also only
calculated if requested.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Cleanup common_timer_get() a little.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pass current time to hrtimer_forward(). This allows to use the softirq time
in the timer base when the forward function is called from the timer callback.
Other places pass current time with a call to timer->base->get_time().
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The hrtimer softirq is called from the timer softirq every tick. Retrieve the
current time from xtime and wall_to_monotonic instead of calling
base->get_time() for each timer base. Store the time in the base structure
and provide a hook once clock source abstractions are in place and to keep the
code open for new base clocks.
Based on a patch from: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Create compat_sys_adjtimex and use it an all appropriate places.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If there's an error in load_image() we should return that without checking
snapshot_image_loaded.
Signed-off-by: Con Kolivas <kernel@kolivas.org>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Warn if free_irq() is called in IRQ context - free_irq() can execute /proc
VFS work, which must not be done in IRQ context.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
* 'audit.b3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: (22 commits)
[PATCH] fix audit_init failure path
[PATCH] EXPORT_SYMBOL patch for audit_log, audit_log_start, audit_log_end and audit_format
[PATCH] sem2mutex: audit_netlink_sem
[PATCH] simplify audit_free() locking
[PATCH] Fix audit operators
[PATCH] promiscuous mode
[PATCH] Add tty to syscall audit records
[PATCH] add/remove rule update
[PATCH] audit string fields interface + consumer
[PATCH] SE Linux audit events
[PATCH] Minor cosmetic cleanups to the code moved into auditfilter.c
[PATCH] Fix audit record filtering with !CONFIG_AUDITSYSCALL
[PATCH] Fix IA64 success/failure indication in syscall auditing.
[PATCH] Miscellaneous bug and warning fixes
[PATCH] Capture selinux subject/object context information.
[PATCH] Exclude messages by message type
[PATCH] Collect more inode information during syscall processing.
[PATCH] Pass dentry, not just name, in fsnotify creation hooks.
[PATCH] Define new range of userspace messages.
[PATCH] Filter rule comparators
...
Fixed trivial conflict in security/selinux/hooks.c
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (21 commits)
BUG_ON() Conversion in drivers/video/
BUG_ON() Conversion in drivers/parisc/
BUG_ON() Conversion in drivers/block/
BUG_ON() Conversion in sound/sparc/cs4231.c
BUG_ON() Conversion in drivers/s390/block/dasd.c
BUG_ON() Conversion in lib/swiotlb.c
BUG_ON() Conversion in kernel/cpu.c
BUG_ON() Conversion in ipc/msg.c
BUG_ON() Conversion in block/elevator.c
BUG_ON() Conversion in fs/coda/
BUG_ON() Conversion in fs/binfmt_elf_fdpic.c
BUG_ON() Conversion in input/serio/hil_mlc.c
BUG_ON() Conversion in md/dm-hw-handler.c
BUG_ON() Conversion in md/bitmap.c
The comment describing how MS_ASYNC works in msync.c is confusing
rcu: undeclared variable used in documentation
fix typos "wich" -> "which"
typo patch for fs/ufs/super.c
Fix simple typos
tabify drivers/char/Makefile
...
This removes the support for pps. It's completely unused within the kernel
and is basically in the way for further cleanups. It should be easier to
readd proper support for it after the rest has been converted to NTP4
(where the pps mechanisms are quite different from NTP3 anyway).
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: Adrian Bunk <bunk@stusta.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add support for SA_PERCPU_IRQ (only mmtimer.c uses this at this stage).
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch avoids arithmetic on 'signed' types that are slower than
'unsigned'. This saves space and cpu cycles.
size of kernel/sys.o before the patch (gcc-3.4.5)
text data bss dec hex filename
10924 252 4 11180 2bac kernel/sys.o
size of kernel/sys.o after the patch
text data bss dec hex filename
10903 252 4 11159 2b97 kernel/sys.o
I noticed that gcc-4.1.0 (from Fedora Core 5) even uses idiv instruction for
(a+b)/2 if a and b are signed.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Moved check for online cpu out of smp_prepare_cpu()
- Moved default declaration of smp_prepare_cpu() to kernel/cpu.c
- Removed lock_cpu_hotplug() from smp_prepare_cpu() to around it, since
its called from cpu_up() as well now.
- Removed clearing from cpu_present_map during cpu_offline as it breaks
using cpu_up() directly during a subsequent online operation.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Cc: Srivatsa Vaddagiri <vatsa@in.ibm.com>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
While doing some benchmarks of an Apache/PHP SMP server, I noticed high
oprofile numbers in in_group_p() and _atomic_dec_and_lock().
rank percent
1 4.8911 % __link_path_walk
2 4.8503 % __d_lookup
*3 4.2911 % _atomic_dec_and_lock
4 3.9307 % __copy_to_user_ll
5 4.9004 % sysenter_past_esp
*6 3.3248 % in_group_p
It appears that in_group_p() does an uncessary
get_group_info(current->group_info); /* atomic_inc() */
... /* access current->group_info */
put_group_info(current->group_info); /* _atomic_dec_and_lock */
It is not necessary to do this, because the current task holds a reference
on its own group_info, and this reference cannot change during the lookup.
This patch deletes the get_group_info()/put_group_info() pair from
sys_getgroups(), in_group_p() and in_egroup_p() functions.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Tim Hockin <thockin@hockin.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A couple of places are forgetting to take it.
The kswapd case is probably unimportant. keventd_create_kthread() was racy.
The whole thing is a bit flakey: you start a kernel thread, get its pid from
kernel_thread() then look up its task_struct.
a) It assumes that pid recycling takes a "long" time.
b) We get a task_struct but no reference was taken on it. The owner of the
kswapd and kthread task_struct*'s must assume that the new thread won't
exit unexpectedly. Because if it does, they're left holding dead memory
and any attempt to control or stop that task will crash.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move capable() to kernel/capability.c and eliminate duplicate
implementations. Add __capable() function which can be used to check for
capabiilty of any process.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fix prevents re-disabling and enabling of a previously disabled
interrupt. On an SMP system with irq balancing enabled; If an interrupt is
disabled from within its own interrupt context with disable_irq_nosync and is
also earmarked for processor migration, the interrupt is blindly moved to the
other processor and enabled without regard for its current "enabled" state.
If there is an interrupt pending, it will unexpectedly invoke the irq handler
on the new irq owning processor (even though the irq was previously disabled)
The more intuitive fix would be to invoke disable_irq_nosync and
enable_irq, but since we already have the desc->lock from __do_IRQ, we
cannot call them directly. Instead we can use the same logic to disable
and enable found in disable_irq_nosync and enable_irq, with regards to the
desc->depth.
This now prevents a disabled interrupt from being re-disabled, and more
importantly prevents a disabled interrupt from being incorrectly enabled on
a different processor.
Signed-off-by: Bryan Holty <lgeek@frontiernet.net>
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Uninline some massive IRQ migration functions. Put them in the new
kernel/irq/migration.c.
Cc: Andi Kleen <ak@muc.de>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
param_array() in kernel/params.c can now become static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
MODULE_PARM was actually breaking: recent gcc version optimize them out as
unused. It's time to replace the last users, which are generally in the
most unloved drivers anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
According to the specification the timevals must be validated and an
errorcode -EINVAL returned in case the timevals are not in canonical form.
This check was never done in Linux.
The pre 2.6.16 code converted invalid timevals silently. Negative timeouts
were converted by the timeval_to_jiffies conversion to the maximum timeout.
hrtimers and the ktime_t operations expect timevals in canonical form.
Otherwise random results might happen on 32 bits machines due to the
optimized ktime_add/sub operations. Negative timeouts are treated as
already expired. This might break applications which work on pre 2.6.16.
To prevent random behaviour and API breakage the timevals are checked and
invalid timevals sanitized in a simliar way as the pre 2.6.16 code did.
Invalid timevals are reported with a per boot limited number of kernel
messages so applications which use this misfeature can be corrected.
After a grace period of one year the sanitizing should be replaced by a
correct validation check. This is also documented in
Documentation/feature-removal-schedule.txt
The validation and sanitizing is done inside do_setitimer so all callers
(sys_setitimer, compat_sys_setitimer, osf_setitimer) are catched.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
alarm() calls the kernel with an unsigend int timeout in seconds. The
value is stored in the tv_sec field of a struct timeval to setup the
itimer. The tv_sec field of struct timeval is of type long, which causes
the tv_sec value to be negative on 32 bit machines if seconds > INT_MAX.
Before the hrtimer merge (pre 2.6.16) such a negative value was converted
to the maximum jiffies timeout by the timeval_to_jiffies conversion. It's
not clear whether this was intended or just happened to be done by the
timeval_to_jiffies code.
hrtimers expect a timeval in canonical form and treat a negative timeout as
already expired. This breaks the legitimate usage of alarm() with a
timeout value > INT_MAX seconds.
For 32 bit machines it is therefor necessary to limit the internal seconds
value to avoid API breakage. Instead of doing this in all implementations
of sys_alarm the duplicated sys_alarm code is moved into a common function
in itimer.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I seem to have lost this hunk in yesterday's patch. It brings the
coming-online CPU's softlockup timer up to date so we don't get false-positive
tripups during CPU hot-add.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
uevent_seqnum and uevent_helper are only defined if CONFIG_HOTPLUG=y,
CONFIG_NET=n.
(I stole this back from Greg's tree - it makes allnoconfig work).
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make the softlockup detector purely timer-interrupt driven, removing
softirq-context (timer) dependencies. This means that if the softlockup
watchdog triggers, it has truly observed a longer than 10 seconds
scheduling delay of a SCHED_FIFO prio 99 task.
(the patch also turns off the softlockup detector during the initial bootup
phase and does small style fixes)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the change of personality does not lead to change of exec domain,
__set_personality() returned without releasing the module reference
acquired by lookup_exec_domain().
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when
it should. I don't think we can fix this without a 2.7.x..
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero
seconds. But the spec says it should, and that's what 2.4.x does.
Fixing this for real would involve some complexity (such as adding a new
it-has-been-set flag to the task_struct, and testing that everwhere, instead
of overloading the value of it_prof_expires).
Given that a 2.4 kernel won't actually send the signal until one second has
expired anyway, let's just handle this case by treating the caller's
zero-seconds as one second.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Whitespace cleanups
- Make that expression comprehensible.
There's a potential logic change here: we do the "is it_prof_expires equal to
zero" test after converting it to seconds, rather than doing the comparison
between raw cputime_t's.
But given that it's in units of seconds anyway, that shouldn't change
anything.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Ulrich Weigand <uweigand@de.ibm.com>
Cc: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It appears that console_setup() code only gets compiled into the kernel if
CONFIG_PRINTK is enabled. One detrimental side-effect of this is that
serial8250_console_setup() never gets invoked when CONFIG_PRINTK is not
set, resulting in baud rate not being read/parsed from command line (i.e.
console=ttyS0,115200n8 is ignored, at least the baud rate part...)
Attached patch moves console_setup() code from inside
#ifdef CONFIG_PRINTK
to outside (in printk.c), removing dependence on said config. option.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove a useless variable initialization in cpuset __cpuset_zone_allowed().
The local variable 'allowed' is unconditionally set before use, later on
in the code, so does not need to be initialized.
Not that it seems to matter to the code generated any, as the compiler
optimizes out the superfluous assignment anyway.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Drop the atomic_t marking on the cpuset static global
cpuset_mems_generation. Since all access to it is guarded by the global
manage_mutex, there is no need for further serialization of this value.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove a no longer needed test for NULL cpuset pointer, with a little
comment explaining why the test isn't needed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The hooks in the slab cache allocator code path for support of NUMA
mempolicies and cpuset memory spreading are in an important code path. Many
systems will use neither feature.
This patch optimizes those hooks down to a single check of some bits in the
current tasks task_struct flags. For non NUMA systems, this hook and related
code is already ifdef'd out.
The optimization is done by using another task flag, set if the task is using
a non-default NUMA mempolicy. Taking this flag bit along with the
PF_SPREAD_PAGE and PF_SPREAD_SLAB flag bits added earlier in this 'cpuset
memory spreading' patch set, one can check for the combination of any of these
special case memory placement mechanisms with a single test of the current
tasks task_struct flags.
This patch also tightens up the code, to save a few bytes of kernel text
space, and moves some of it out of line. Due to the nested inlines called
from multiple places, we were ending up with three copies of this code, which
once we get off the main code path (for local node allocation) seems a bit
wasteful of instruction memory.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch provides the implementation and cpuset interface for an alternative
memory allocation policy that can be applied to certain kinds of memory
allocations, such as the page cache (file system buffers) and some slab caches
(such as inode caches).
The policy is called "memory spreading." If enabled, it spreads out these
kinds of memory allocations over all the nodes allowed to a task, instead of
preferring to place them on the node where the task is executing.
All other kinds of allocations, including anonymous pages for a tasks stack
and data regions, are not affected by this policy choice, and continue to be
allocated preferring the node local to execution, as modified by the NUMA
mempolicy.
There are two boolean flag files per cpuset that control where the kernel
allocates pages for the file system buffers and related in kernel data
structures. They are called 'memory_spread_page' and 'memory_spread_slab'.
If the per-cpuset boolean flag file 'memory_spread_page' is set, then the
kernel will spread the file system buffers (page cache) evenly over all the
nodes that the faulting task is allowed to use, instead of preferring to put
those pages on the node where the task is running.
If the per-cpuset boolean flag file 'memory_spread_slab' is set, then the
kernel will spread some file system related slab caches, such as for inodes
and dentries evenly over all the nodes that the faulting task is allowed to
use, instead of preferring to put those pages on the node where the task is
running.
The implementation is simple. Setting the cpuset flags 'memory_spread_page'
or 'memory_spread_cache' turns on the per-process flags PF_SPREAD_PAGE or
PF_SPREAD_SLAB, respectively, for each task that is in the cpuset or
subsequently joins that cpuset. In subsequent patches, the page allocation
calls for the affected page cache and slab caches are modified to perform an
inline check for these flags, and if set, a call to a new routine
cpuset_mem_spread_node() returns the node to prefer for the allocation.
The cpuset_mem_spread_node() routine is also simple. It uses the value of a
per-task rotor cpuset_mem_spread_rotor to select the next node in the current
tasks mems_allowed to prefer for the allocation.
This policy can provide substantial improvements for jobs that need to place
thread local data on the corresponding node, but that need to access large
file system data sets that need to be spread across the several nodes in the
jobs cpuset in order to fit. Without this patch, especially for jobs that
might have one thread reading in the data set, the memory allocation across
the nodes in the jobs cpuset can become very uneven.
A couple of Copyright year ranges are updated as well. And a couple of email
addresses that can be found in the MAINTAINERS file are removed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace pairs of calls to <atomic_inc, atomic_read>, with a single call
atomic_inc_return, saving a few bytes of source and kernel text.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Since the test_bit() bit operator is boolean (return 0 or 1), the double not
"!!" operations needed to convert a scalar (zero or not zero) to a boolean are
not needed.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A long-running rcutorture test can overflow dmesg, so that the line
containing the module parameters is lost. Although it is usually possible
to retrieve this information from the log files, it is much better to just
tag it onto the final success/failure line so that it may be easily found.
This patch does just that.
Signed-off-by: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With internal Xen-enabled kernels we see the kernel's static per-cpu data
area exceed the limit of 32k on x86-64, and even native x86-64 kernels get
fairly close to that limit. I generally question whether it is reasonable
to have data structures several kb in size allocated as per-cpu data when
the space there is rather limited.
The biggest arch-independent consumer is tvec_bases (over 4k on 32-bit
archs, over 8k on 64-bit ones), which now gets converted to use dynamically
allocated memory instead.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
__rcu_process_callbacks() disables interrupts to protect itself from
call_rcu() which adds new entries to ->nxtlist.
However we can check "->nxtlist != NULL" with interrupts enabled, we can't
get "false positives" because call_rcu() can only change this condition
from 0 to 1.
Tested with rcutorture.ko.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When (integer) sysctl values are in either seconds or centiseconds, but
represented internally as jiffies, the allowable value range is decreased.
This patch adds range checks to the conversion routines.
For values in seconds: maximum LONG_MAX / HZ.
For values in centiseconds: maximum (LONG_MAX / HZ) * USER_HZ.
(BTW, does anyone else feel that an interface in seconds should not be
accepting negative values?)
Signed-off-by: Bart Samwel <bart@samwel.tk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make that the internal value for /proc/sys/vm/laptop_mode is stored as
jiffies instead of seconds. Let the sysctl interface do the conversions,
instead of doing on-the-fly conversions every time the value is used.
Add a description of the fact that laptop_mode doubles as a flag and a
timeout to the comment above the laptop_mode variable.
Signed-off-by: Bart Samwel <bart@samwel.tk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make that the internal values for:
/proc/sys/vm/dirty_writeback_centisecs
/proc/sys/vm/dirty_expire_centisecs
are stored as jiffies instead of centiseconds. Let the sysctl interface do
the conversions with full precision using clock_t_to_jiffies, instead of
doing overflow-sensitive on-the-fly conversions every time the values are
used.
Cons: apparent precision loss if HZ is not a multiple of 100, because of
conversion back and forth. This is a common problem for all sysctl values
that use proc_dointvec_userhz_jiffies. (There is only one other in-tree
use, in net/core/neighbour.c.)
Signed-off-by: Bart Samwel <bart@samwel.tk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reduce lock hold times in free_uid().
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch makes two needlessly global structs static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch changes the code from:
preempt_disable();
for (;;) {
...
preempt_disable();
}
to:
for (;;) {
preempt_disable();
...
}
which seems more clean to me and saves a couple of bytes for
each function.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Attempt to fix the problem wherein people's oops reports scroll off the screen
due to repeated oopsing or to oopses on other CPUs.
If this happens the user can reboot with the `pause_on_oops=<seconds>' option.
It will allow the first oopsing CPU to print an oops record just a single
time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs
to enter a tight loop until the specified number of seconds have elapsed.
The patch implements the infrastructure generically in the expectation that
architectures other than x86 will find it useful.
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Consolidate all kernel bug printouts to begin with the "BUG: " string.
Makes it easier to find them in large bootup logs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch converts the module_mutex semaphore to a mutex.
Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
convert cpuset.c's callback_sem and manage_sem to mutexes.
Build and boot tested by Ingo.
Build, boot, unit and stress tested by pj.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Avoid taking the global tasklist_lock when possible, if a process is single
threaded during getrusage(). Any avoidance of tasklist_lock is good for
NUMA boxes (and possibly for large SMPs). Thanks to Oleg Nesterov for
review and suggestions.
Signed-off-by: Nippun Goel <nippung@calsoftinc.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: Shai Fultheim <shai@scalex86.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1) Reduce the size of (struct fdtable) to exactly 64 bytes on 32bits
platforms, lowering kmalloc() allocated space by 50%.
2) Reduce the size of (files_struct), using a special 32 bits (or
64bits) embedded_fd_set, instead of a 1024 bits fd_set for the
close_on_exec_init and open_fds_init fields. This save some ram (248
bytes per task) as most tasks dont open more than 32 files. D-Cache
footprint for such tasks is also reduced to the minimum.
3) Reduce size of allocated fdset. Currently two full pages are
allocated, that is 32768 bits on x86 for example, and way too much. The
minimum is now L1_CACHE_BYTES.
UP and SMP should benefit from this patch, because most tasks will touch
only one cache line when open()/close() stdin/stdout/stderr (0/1/2),
(next_fd, close_on_exec_init, open_fds_init, fd_array[0 .. 2] being in the
same cache line)
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add the SNAPSHOT_S2RAM ioctl to the snapshot device.
This ioctl allows a userland application to make the system (previously frozen
with the SNAPSHOT_FREE ioctl) enter the S3 state without freezing processes
and disabling nonboot CPUs for the second time.
This will allow us to implement the suspend-to-disk-and-RAM (STDR)
functionality in the userland suspend tools.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the console-switching code from the suspend part of the swsusp userland
interface and let the userland tools switch the console.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Highmem could be in pcp list as well.
Signed-off-by: Shaohua Li<shaohua.li@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch from Pavel moves userland freeze signals handling into more logical
place. It now hits even with mysqld running.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Combination of printk/pr_debug led to <7> in the middle of the line, and we
printed way too many dots.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allow swsusp to freeze processes successfully under heavy load by freezing
userspace processes before kernel threads.
[Thanks to Nigel Cunningham <nigel@suspend2.net> for suggesting the
way to go.]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch introduces a user space interface for swsusp.
The interface is based on a special character device, called the snapshot
device, that allows user space processes to perform suspend and resume-related
operations with the help of some ioctls and the read()/write() functions.
Additionally it allows these processes to allocate free swap pages from a
selected swap partition, called the resume partition, so that they know which
sectors of the resume partition are available to them.
The interface uses the same low-level system memory snapshot-handling
functions that are used by the built-it swap-writing/reading code of swsusp.
The interface documentation is included in the patch.
The patch assumes that the major and minor numbers of the snapshot device will
be 10 (ie. misc device) and 231, the registration of which has already been
requested.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Update suspend-to-RAM documentation with new machines, and makes message
when processes can't be stopped little clearer. (In one case, waiting
longer actually did help).
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Warn in the documentation that data may be lost if there are some
filesystems mounted from USB devices before suspend.
[Thanks to Alan Stern for providing the answer to the question in the
Q:-A: part.]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move externs from C source files to header files.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move the swap-writing/reading code of swsusp to a separate file.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Introduce the low level interface that can be used for handling the
snapshot of the system memory by the in-kernel swap-writing/reading code of
swsusp and the userland interface code (to be introduced shortly).
Also change the way in which swsusp records the allocated swap pages and,
consequently, simplifies the in-kernel swap-writing/reading code (this is
necessary for the userland interface too). To this end, it introduces two
helper functions in mm/swapfile.c, so that the swsusp code does not refer
directly to the swap internals.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This was a temporary thing for 2.6.16.
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We have noticed lockups during boot when stress testing kexec on ppc64.
Two cpus would deadlock in scheduler code trying to grab already taken
spinlocks.
The double_rq_lock code uses the address of the runqueue to order the
taking of multiple locks. This address is a per cpu variable:
if (rq1 < rq2) {
spin_lock(&rq1->lock);
spin_lock(&rq2->lock);
} else {
spin_lock(&rq2->lock);
spin_lock(&rq1->lock);
}
On the other hand, the code in wake_sleeping_dependent uses the cpu id
order to grab locks:
for_each_cpu_mask(i, sibling_map)
spin_lock(&cpu_rq(i)->lock);
This means we rely on the address of per cpu data increasing as cpu ids
increase. While this will be true for the generic percpu implementation it
may not be true for arch specific implementations.
One way to solve this is to always take runqueues in cpu id order. To do
this we add a cpu variable to the runqueue and check it in the
double runqueue locking functions.
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When on_each_cpu() runs the callback on other CPUs, it runs with local
interrupts disabled. So we should run the function with local interrupts
disabled on this CPU, too.
And do the same for UP, so the callback is run in the same environment on both
UP and SMP. (strictly it should do preempt_disable() too, but I think
local_irq_disable is sufficiently equivalent).
Also uninlines on_each_cpu(). softirq.c was the most appropriate file I could
find, but it doesn't seem to justify creating a new file.
Oh, and fix up that comment over (under?) x86's smp_call_function(). It
drives me nuts.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A bare bones trivial patch to ensure we always get -EINVAL on the
unsupported cases for sys_unshare. If this goes in before 2.6.16 it allows
us to forward compatible with future applications using sys_unshare.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: JANAK DESAI <janak@us.ibm.com>
Cc: <stable@kerenl.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the sleep_avg multiplier. This multiplier was necessary back when
we had 10 seconds of dynamic range in sleep_avg, but now that we only have
one second, it causes that one second to be compressed down to 100ms in
some cases. This is particularly noticeable when compiling a kernel in a
slow NFS mount, and I believe it to be a very likely candidate for other
recently reported network related interactivity problems.
In testing, I can detect no negative impact of this removal.
Signed-off-by: Mike Galbraith <efault@gmx.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The module files, refcnt, version, and srcversion did not properly
increment the owner's module reference count, allowing the modules to
be removed while the files were open, causing oopses.
This patch fixes this, and also fixes the problem that the version and
srcversion files were not showing up, unless CONFIG_MODULE_UNLOAD was
enabled, which is not correct.
Cc: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the RCU symbols are going to be changed to GPL in the near future,
lets warn users that this is going to happen.
Cc: Paul McKenney <paulmck@us.ibm.com>
Acked-by: Dipankar Sarma <dipankar@in.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the ability to mark symbols that will be changed in the
future, so that kernel modules that don't include MODULE_LICENSE("GPL")
and use the symbols, will be flagged and printed out to the system log.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Moving uevent_seqnum and uevent_helper to kobject_uevent.c
because they are used even if CONFIG_SYSFS=n
while kernel/ksysfs.c is built only if CONFIG_SYSFS=y,
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make audit_init() failure path handle situations where the audit_panic()
action is not AUDIT_FAIL_PANIC (default is AUDIT_FAIL_PRINTK). Other uses
of audit_sock are not reached unless audit's netlink message handler is
properly registered. Bug noticed by Peter Staubach.
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
This is a trivial patch that enables the possibility of using some auditing
functions within loadable kernel modules (ie. inside a Linux Security Module).
_
Make the audit_log_start, audit_log_end, audit_format and audit_log
interfaces available to Loadable Kernel Modules, thus making possible
the usage of the audit framework inside LSMs, etc.
Signed-off-by: <Lorenzo Hernández García-Hierro <lorenzo@gnu.org>>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Semaphore to mutex conversion.
The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Simplify audit_free()'s locking: no need to lock a task that we are tearing
down. [the extra locking also caused false positives in the lock
validator]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Darrel Goeddel initiated a discussion on IRC regarding the possibility
of audit_comparator() returning -EINVAL signaling an invalid operator.
It is possible when creating the rule to assure that the operator is one
of the 6 sane values. Here's a snip from include/linux/audit.h Note
that 0 (nonsense) and 7 (all operators) are not valid values for an
operator.
...
/* These are the supported operators.
* 4 2 1
* = > <
* -------
* 0 0 0 0 nonsense
* 0 0 1 1 <
* 0 1 0 2 >
* 0 1 1 3 !=
* 1 0 0 4 =
* 1 0 1 5 <=
* 1 1 0 6 >=
* 1 1 1 7 all operators
*/
...
Furthermore, prior to adding these extended operators, flagging the
AUDIT_NEGATE bit implied !=, and otherwise == was assumed.
The following code forces the operator to be != if the AUDIT_NEGATE bit
was flipped on. And if no operator was specified, == is assumed. The
only invalid condition is if the AUDIT_NEGATE bit is off and all of the
AUDIT_EQUAL, AUDIT_LESS_THAN, and AUDIT_GREATER_THAN bits are
on--clearly a nonsensical operator.
Now that this is handled at rule insertion time, the default -EINVAL
return of audit_comparator() is eliminated such that the function can
only return 1 or 0.
If this is acceptable, let's get this applied to the current tree.
:-Dustin
--
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
(cherry picked from 9bf0a8e137040f87d1b563336d4194e38fb2ba1a commit)
Hi,
>From the RBAC specs:
FAU_SAR.1.1 The TSF shall provide the set of authorized
RBAC administrators with the capability to read the following
audit information from the audit records:
<snip>
(e) The User Session Identifier or Terminal Type
A patch adding the tty for all syscalls is included in this email.
Please apply.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Hi,
The following patch adds a little more information to the add/remove rule message emitted
by the kernel.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This fixes the per-user and per-message-type filtering when syscall
auditing isn't enabled.
[AV: folded followup fix from the same author]
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch fixes a couple of bugs revealed in new features recently
added to -mm1:
* fixes warnings due to inconsistent use of const struct inode *inode
* fixes bug that prevent a kernel from booting with audit on, and SELinux off
due to a missing function in security/dummy.c
* fixes a bug that throws spurious audit_panic() messages due to a missing
return just before an error_path label
* some reasonable house cleaning in audit_ipc_context(),
audit_inode_context(), and audit_log_task_context()
Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This patch extends existing audit records with subject/object context
information. Audit records associated with filesystem inodes, ipc, and
tasks now contain SELinux label information in the field "subj" if the
item is performing the action, or in "obj" if the item is the receiver
of an action.
These labels are collected via hooks in SELinux and appended to the
appropriate record in the audit code.
This additional information is required for Common Criteria Labeled
Security Protection Profile (LSPP).
[AV: fixed kmalloc flags use]
[folded leak fixes]
[folded cleanup from akpm (kfree(NULL)]
[folded audit_inode_context() leak fix]
[folded akpm's fix for audit_ipc_perm() definition in case of !CONFIG_AUDIT]
Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
- Add a new, 5th filter called "exclude".
- And add a new field AUDIT_MSGTYPE.
- Define a new function audit_filter_exclude() that takes a message type
as input and examines all rules in the filter. It returns '1' if the
message is to be excluded, and '0' otherwise.
- Call the audit_filter_exclude() function near the top of
audit_log_start() just after asserting audit_initialized. If the
message type is not to be audited, return NULL very early, before
doing a lot of work.
[combined with followup fix for bug in original patch, Nov 4, same author]
[combined with later renaming AUDIT_FILTER_EXCLUDE->AUDIT_FILTER_TYPE
and audit_filter_exclude() -> audit_filter_type()]
Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch augments the collection of inode info during syscall
processing. It represents part of the functionality that was provided
by the auditfs patch included in RHEL4.
Specifically, it:
- Collects information for target inodes created or removed during
syscalls. Previous code only collects information for the target
inode's parent.
- Adds the audit_inode() hook to syscalls that operate on a file
descriptor (e.g. fchown), enabling audit to do inode filtering for
these calls.
- Modifies filtering code to check audit context for either an inode #
or a parent inode # matching a given rule.
- Modifies logging to provide inode # for both parent and child.
- Protect debug info from NULL audit_names.name.
[AV: folded a later typo fix from the same author]
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The audit hooks (to be added shortly) will want to see dentry->d_inode
too, not just the name.
Signed-off-by: Amy Griffis <amy.griffis@hp.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
The attached patch updates various items for the new user space
messages. Please apply.
Signed-off-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Currently, audit only supports the "=" and "!=" operators in the -F
filter rules.
This patch reworks the support for "=" and "!=", and adds support
for ">", ">=", "<", and "<=".
This turned out to be a pretty clean, and simply process. I ended up
using the high order bits of the "field", as suggested by Steve and Amy.
This allowed for no changes whatsoever to the netlink communications.
See the documentation within the patch in the include/linux/audit.h
area, where there is a table that explains the reasoning of the bitmask
assignments clearly.
The patch adds a new function, audit_comparator(left, op, right).
This function will perform the specified comparison (op, which defaults
to "==" for backward compatibility) between two values (left and right).
If the negate bit is on, it will negate whatever that result was. This
value is returned.
Signed-off-by: Dustin Kirkland <dustin.kirkland@us.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
- add kerneldoc for non-static functions;
- don't init static data to 0;
- limit lines to < 80 columns;
- fix long-format style;
- delete whitespace at end of some lines;
(chrisw: resend and update to current audit-2.6 tree)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
hi,
The motivation behind the patch below was to address messages in
/var/log/messages such as:
Jan 31 10:54:15 mets kernel: audit(:0): major=252 name_count=0: freeing
multiple contexts (1)
Jan 31 10:54:15 mets kernel: audit(:0): major=113 name_count=0: freeing
multiple contexts (2)
I can reproduce by running 'get-edid' from:
http://john.fremlin.de/programs/linux/read-edid/.
These messages come about in the log b/c the vm86 calls do not exit via
the normal system call exit paths and thus do not call
'audit_syscall_exit'. The next system call will then free the context for
itself and for the vm86 context, thus generating the above messages. This
patch addresses the issue by simply adding a call to 'audit_syscall_exit'
from the vm86 code.
Besides fixing the above error messages the patch also now allows vm86
system calls to become auditable. This is useful since strace does not
appear to properly record the return values from sys_vm86.
I think this patch is also a step in the right direction in terms of
cleaning up some core auditing code. If we can correct any other paths
that do not properly call the audit exit and entries points, then we can
also eliminate the notion of context chaining.
I've tested this patch by verifying that the log messages no longer
appear, and that the audit records for sys_vm86 appear to be correct.
Also, 'read_edid' produces itentical output.
thanks,
-Jason
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
testcase:
mount /dev/sdb10 /mnt
touch /mnt/tmp/b
umount /mnt
mount /dev/sdb10 /mnt
rm /mnt/tmp/b </mnt/tmp/b
umount /mnt
and watch blkdev_ioc line in /proc/slabinfo. Vanilla kernel leaks.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sys_unshare() does mmput(new_mm). This is not enough if we have
mm->core_waiters.
This patch is a temporary fix for soon to be released 2.6.16.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
[ Checked with Uli: "I'm not planning to use unshare(CLONE_VM). It's
not needed for any functionality planned so far. What we (as in Red
Hat) need unshare() for now is the filesystem side." ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When the posix-timer signal is ignored then the timer is rearmed by the
callback function. The requeue pending accounting has to be fixed up else
the state might be wrong.
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The pointer to the current time interpolator and the current list of time
interpolators are typically only changed during bootup. Adding
__read_mostly takes them away from possibly hot cachelines.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The sighand pointer only needs the rcu_read_lock on the
read side. So only depending on task_lock protection
when setting this pointer is not enough. We also need
a memory barrier to ensure the initialization is seen first.
Use rcu_assign_pointer as it does this for us, and clearly
documents that we are setting an rcu readable pointer.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch fixes alternate signal stack corruption among cloned threads
with CLONE_SIGHAND (and CLONE_VM) for linux-2.6.16-rc6.
The value of alternate signal stack is currently inherited after a call of
clone(... CLONE_SIGHAND | CLONE_VM). But if sigaltstack is set by a
parent thread, and then if multiple cloned child threads (+ parent threads)
call signal handler at the same time, some threads may be conflicted -
because they share to use the same alternative signal stack region.
Finally they get sigsegv. It's an undesirable race condition. Note that
child threads created from NPTL pthread_create() also hit this conflict
when the parent thread uses sigaltstack, without my patch.
To fix this problem, this patch clears the child threads' sigaltstack
information like exec(). This behavior follows the SUSv3 specification.
In SUSv3, pthread_create() says "The alternate stack shall not be inherited
(when new threads are initialized)". It means that sigaltstack should be
cleared when sigaltstack memory space is shared by cloned threads with
CLONE_SIGHAND.
Note that I chose "if (clone_flags & CLONE_SIGHAND)" line because:
- If clone_flags line is not existed, fork() does not inherit sigaltstack.
- CLONE_VM is another choice, but vfork() does not inherit sigaltstack.
- CLONE_SIGHAND implies CLONE_VM, and it looks suitable.
- CLONE_THREAD is another candidate, and includes CLONE_SIGHAND + CLONE_VM,
but this flag has a bit different semantics.
I decided to use CLONE_SIGHAND.
[ Changed to test for CLONE_VM && !CLONE_VFORK after discussion --Linus ]
Signed-off-by: GOTO Masanori <gotom@sanori.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Linus Torvalds <torvalds@osdl.org>
Cc: Ulrich Drepper <drepper@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch '[PATCH] RCU signal handling' [1] added an export for
__put_task_struct_cb, a put_task_struct helper newly introduced in that
patch. But the put_task_struct couldn't be used modular previously as
__put_task_struct wasn't exported. There are not callers of it in modular
code, and it shouldn't be exported because we don't want drivers to hold
references to task_structs.
This patch removes the export and folds __put_task_struct into
__put_task_struct_cb as there's no other caller.
[1] http://www2.kernel.org/git/gitweb.cgi?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=e56d090310d7625ecb43a1eeebd479f04affb48b
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I have benchmarked this on an x86_64 NUMA system and see no significant
performance difference on kernbench. Tested on both x86_64 and powerpc.
The way we do file struct accounting is not very suitable for batched
freeing. For scalability reasons, file accounting was
constructor/destructor based. This meant that nr_files was decremented
only when the object was removed from the slab cache. This is susceptible
to slab fragmentation. With RCU based file structure, consequent batched
freeing and a test program like Serge's, we just speed this up and end up
with a very fragmented slab -
llm22:~ # cat /proc/sys/fs/file-nr
587730 0 758844
At the same time, I see only a 2000+ objects in filp cache. The following
patch I fixes this problem.
This patch changes the file counting by removing the filp_count_lock.
Instead we use a separate percpu counter, nr_files, for now and all
accesses to it are through get_nr_files() api. In the sysctl handler for
nr_files, we populate files_stat.nr_files before returning to user.
Counting files as an when they are created and destroyed (as opposed to
inside slab) allows us to correctly count open files with RCU.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch adds new tunables for RCU queue and finished batches. There are
two types of controls - number of completed RCU updates invoked in a batch
(blimit) and monitoring for high rate of incoming RCUs on a cpu (qhimark,
qlowmark).
By default, the per-cpu batch limit is set to a small value. If the input
RCU rate exceeds the high watermark, we do two things - force quiescent
state on all cpus and set the batch limit of the CPU to INTMAX. Setting
batch limit to INTMAX forces all finished RCUs to be processed in one shot.
If we have more than INTMAX RCUs queued up, then we have bigger problems
anyway. Once the incoming queued RCUs fall below the low watermark, the
batch limit is set to the default.
Signed-off-by: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Idle threads should have a sane ->timestamp value, to avoid init kernel
thread(s) from inheriting it and causing miscalculations in
try_to_wake_up().
Reported-by: Mike Galbraith <efault@gmx.de>.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a compiler barrier so that we don't read jiffies before updating
jiffies_64.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Also from Thomas Gleixner <tglx@linutronix.de>
Function next_timer_interrupt() got broken with a recent patch
6ba1b91213 as sys_nanosleep() was moved to
hrtimer. This broke things as next_timer_interrupt() did not check hrtimer
tree for next event.
Function next_timer_interrupt() is needed with dyntick (CONFIG_NO_IDLE_HZ,
VST) implementations, as the system can be in idle when next hrtimer event
was supposed to happen. At least ARM and S390 currently use
next_timer_interrupt().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Just to be safe, we should not trigger a conditional reschedule during
the early boot sequence. We've historically done some questionable
early on, and the safety warnings in __might_sleep() are generally
turned off during that period, so there might be problems lurking.
This affects CONFIG_PREEMPT_VOLUNTARY, which takes over might_sleep() to
cause a voluntary conditional reschedule.
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On some platforms readq performs additional work to make sure I/O is done
in a coherent way. This is not needed for time retrieval as done by the
time interpolator. So we can use readq_relaxed instead which will improve
performance.
It affects sparc64 and ia64 only. Apparently it makes a significant
difference on ia64.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: john stultz <johnstul@us.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
acpi_video_flags variable is unsigned long, so it should be set as such.
This actually matters on x86-64.
Signed-off-by: Stefan Seyfried <seife@suse.de>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allow sysadmin to disable all warnings about userland apps
making unaligned accesses by using:
# echo 1 > /proc/sys/kernel/ignore-unaligned-usertrap
Rather than having to use prctl on a process by process basis.
Default behaivour leaves the warnings enabled.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
We have several points in the SCSI stack (primarily for our device
functions) where we need to guarantee process context, but (given the
place where the last reference was released) we cannot guarantee this.
This API gets around the issue by executing the function directly if
the caller has process context, but scheduling a workqueue to execute
in process context if the caller doesn't have it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
In daemonize() a new thread gets cleaned up and 'merged' with init_task.
The current fs_struct is handled there, but not the current namespace.
This adds the namespace part.
[ Eric Biederman pointed out the namespace wrappers, and also notes that
we can't ever count on using our parents namespace because we already
have called exit_fs(), which is the only way to the namespace from a
process. ]
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The compat syscalls are added to sys_ni.c since they are not defined if the
above CONFIG options are off. Also, nfs would not build with CONFIG_SYSCTL
off.
Noticed by Arthur Othieno.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Luke Yang <luke.adi@gmail.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently, acpi video options can only be set on kernel command line. That's
little inflexible; I'd like userland s2ram application that just works, and
modifying kernel command line according to whitelist is not fun. It is better
to just allow s2ram application to set video options just before suspend
(according to the whitelist).
This implements sysctl to allow setting suspend video options without reboot.
(akpm: Documentation updates for this new sysctl are pending..)
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
audit_log_exit() is called from atomic contexts and gets explicit
gfp_mask argument; it should use it for all allocations rather
than doing some with gfp_mask and some with GFP_KERNEL.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Restore the compatibility with the older code and make it possible to
suspend if the kernel command line doesn't contain the "resume=" argument
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Heiko Carstens <heiko.carstens@de.ibm.com> wrote:
The boot sequence on s390 sometimes takes ages and we spend a very long
time (up to one or two minutes) in calibrate_migration_costs. The time
spent there differs from boot to boot. Also the calculated costs differ
a lot. I've seen differences by up to a factor of 15 (yes, factor not
percent). Also I doubt that making these measurements make much sense on
a completely virtualized architecture where you cannot tell how much cpu
time you will get anyway.
So introduce the CONFIG_DEFAULT_MIGRATION_COST method for an architecture
to set the scheduler migration costs. This turns off automatic detection
of migration costs. Makes sense on virtual platforms, where migration
costs are hard to measure accurately.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This provides an interface for arch code to find out how many
nanoseconds are going to be added on to xtime by the next call to
do_timer. The value returned is a fixed-point number in 52.12 format
in nanoseconds. The reason for this format is that it gives the
full precision that the timekeeping code is using internally.
The motivation for this is to fix a problem that has arisen on 32-bit
powerpc in that the value returned by do_gettimeofday drifts apart
from xtime if NTP is being used. PowerPC is now using a lockless
do_gettimeofday based on reading the timebase register and performing
some simple arithmetic. (This method of getting the time is also
exported to userspace via the VDSO.) However, the factor and offset
it uses were calculated based on the nominal tick length and weren't
being adjusted when NTP varied the tick length.
Note that 64-bit powerpc has had the lockless do_gettimeofday for a
long time now. It also had an extremely hairy routine that got called
from the 32-bit compat routine for adjtimex, which adjusted the
factor and offset according to what it thought the timekeeping code
was going to do. Not only was this only called if a 32-bit task did
adjtimex (i.e. not if a 64-bit task did adjtimex), it was also
duplicating computations from kernel/timer.c and it wasn't clear that
it was (still) correct.
The simple solution is to ask the timekeeping code how long the
current jiffy will be on each timer interrupt, after calling
do_timer. If this jiffy will be a different length from the last one,
we then need to compute new values for the factor and offset used in
the lockless do_gettimeofday. In this way we can keep xtime and
do_gettimeofday in sync, even when NTP is varying the tick length.
Note that when adjtimex varies the tick length, it almost always
introduces the variation from the next tick on. The only case I could
see where adjtimex would vary the length of the current tick is when
an old-style adjtime adjustment is being cancelled. (It's not clear
to me why the adjustment has to be cancelled immediately rather than
from the next tick on.) Thus I don't see any real need for a hook in
adjtimex; the rare case of an old-style adjustment being cancelled can
be fixed up at the next tick.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: john stultz <johnstul@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
AMD SimNow!'s JIT doesn't like them at all in the guest. For distribution
installation it's easiest if it's a boot time option.
Also I moved the variable to a more appropiate place and make
it independent from sysctl
And marked __read_mostly which it is.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I get about 88 squillion of these when suspending an old ad450nx server.
Cc: Pavel Roskin <proski@gnu.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a latent bug in cpuset_exit() handling. If a task tried to allocate
memory after calling cpuset_exit(), it oops'd in
cpuset_update_task_memory_state() on a NULL cpuset pointer.
So set the exiting tasks cpuset to the root cpuset instead of to NULL.
A distro kernel hit this with an added kernel package that had just such a
hook (allocating memory) in the exit code path.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1. The tracee can go from ptrace_stop() to do_signal_stop()
after __ptrace_unlink(p).
2. It is unsafe to __ptrace_unlink(p) while p->parent may wait
for tasklist_lock in ptrace_detach().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
copy_process:
attach_pid(p, PIDTYPE_PID, p->pid);
attach_pid(p, PIDTYPE_TGID, p->tgid);
What if kill_proc_info(p->pid) happens in between?
copy_process() holds current->sighand.siglock, so we are safe
in CLONE_THREAD case, because current->sighand == p->sighand.
Otherwise, p->sighand is unlocked, the new process is already
visible to the find_task_by_pid(), but have a copy of parent's
'struct pid' in ->pids[PIDTYPE_TGID].
This means that __group_complete_signal() may hang while doing
do ... while (next_thread() != p)
We can solve this problem if we reverse these 2 attach_pid()s:
attach_pid() does wmb()
group_send_sig_info() calls spin_lock(), which
provides a read barrier. // Yes ?
I don't think we can hit this race in practice, but still.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
There is a window after copy_process() unlocks ->sighand.siglock
and before it adds the new thread to the thread list.
In that window __group_complete_signal(SIGKILL) will not see the
new thread yet, so this thread will start running while the whole
thread group was supposed to exit.
I beleive we have another good reason to place attach_pid(PID/TGID)
under ->sighand.siglock. We can do the same for
release_task()->__unhash_process()
de_thread()->switch_exec_pids()
After that we don't need tasklist_lock to iterate over the thread
list, and we can simplify things, see for example do_sigaction()
or sys_times().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
CONFIG_TIME_LOW_RES is a temporary way for architectures to signal that
they simply return xtime in do_gettimeoffset(). In this corner-case we
want to round up by resolution when starting a relative timer, to avoid
short timeouts. This will go away with the GTOD framework.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Revert commit d7102e95b7:
[PATCH] sched: filter affine wakeups
Apparently caused more than 10% performance regression for aim7 benchmark.
The setup in use is 16-cpu HP rx8620, 64Gb of memory and 12 MSA1000s with 144
disks. Each disk is 72Gb with a single ext3 filesystem (courtesy of HP, who
supplied benchmark results).
The problem is, for aim7, the wake-up pattern is random, but it still needs
load balancing action in the wake-up path to achieve best performance. With
the above commit, lack of load balancing hurts that workload.
However, for workloads like database transaction processing, the requirement
is exactly opposite. In the wake up path, best performance is achieved with
absolutely zero load balancing. We simply wake up the process on the CPU that
it was previously run. Worst performance is obtained when we do load
balancing at wake up.
There isn't an easy way to auto detect the workload characteristics. Ingo's
earlier patch that detects idle CPU and decide whether to load balance or not
doesn't perform with aim7 either since all CPUs are busy (it causes even
bigger perf. regression).
Revert commit d7102e95b7, which causes more
than 10% performance regression with aim7.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The PageCompound check before access_process_vm's set_page_dirty_lock is no
longer necessary, so remove it. But leave the PageCompound checks in
bio_set_pages_dirty, dio_bio_complete and nfs_free_user_pages: at least some
of those were introduced as a little optimization on hugetlb pages.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When panic_timeout is zero, suppress triggering a nested panic due to soft
lockup detection.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I don't think the code is quite ready, which is why I asked for Peter's
additions to also be merged before I acked it (although it turned out that
it still isn't quite ready with his additions either).
Basically I have had similar observations to Suresh in that it does not
play nicely with the rest of the balancing infrastructure (and raised
similar concerns in my review).
The samples (group of 4) I got for "maximum recorded imbalance" on a 2x2
SMP+HT Xeon are as follows:
| Following boot | hackbench 20 | hackbench 40
-----------+----------------+---------------------+---------------------
2.6.16-rc2 | 30,37,100,112 | 5600,5530,6020,6090 | 6390,7090,8760,8470
+nosmpnice | 3, 2, 4, 2 | 28, 150, 294, 132 | 348, 348, 294, 347
Hackbench raw performance is down around 15% with smpnice (but that in
itself isn't a huge deal because it is just a benchmark). However, the
samples show that the imbalance passed into move_tasks is increased by
about a factor of 10-30. I think this would also go some way to explaining
latency blips turning up in the balancing code (though I haven't actually
measured that).
We'll probably have to revert this in the SUSE kernel.
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Williams <pwil3058@bigpond.net.au>
Cc: "Martin J. Bligh" <mbligh@aracnet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This patch removes all self references and fixes references to files
in the now defunct arch/ppc64 tree. I think this accomplises
everything wanted, though there might be a few references I missed.
Signed-off-by: Jon Mason <jdmason@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Pointed out by Linus Torvalds.
sys_signal() forgets to initialize ->sa_mask.
( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal()
also needs this fix )
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A bunch of asm/bug.h includes are both not needed (since it will get
pulled anyway) and bogus (since they are done too early). Removed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If the file descriptor structure is being shared, allocate a new one and copy
information from the current, shared, structure.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If vm structure is being shared, allocate a new one and copy information from
the current, shared, structure.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If the namespace structure is being shared, allocate a new one and copy
information from the current, shared, structure.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If filesystem structure is being shared, allocate a new one and copy
information from the current, shared, structure.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
sys_unshare system call handler function accepts the same flags as clone
system call, checks constraints on each of the flags and invokes corresponding
unshare functions to disassociate respective process context if it was being
shared with another task.
Here is the link to a program for testing unshare system call.
http://prdownloads.sourceforge.net/audit/unshare_test.c?download
Please note that because of a problem in rmdir associated with bind mounts and
clone with CLONE_NEWNS, the test fails while trying to remove temporary test
directory. You can remove that temporary directory by doing rmdir, twice,
from the command line. The first will fail with EBUSY, but the second will
succeed. I have reported the problem to Ram Pai and Al Viro with a small
program which reproduces the problem. Al told us yesterday that he will be
looking at the problem soon. I have tried multiple rmdirs from the
unshare_test program itself, but for some reason that is not working. Doing
two rmdirs from command line does seem to remove the directory.
Signed-off-by: Janak Desai <janak@us.ibm.com>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix compilation problem in PM headers.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Remove unneeded bio_get() which would cause a bio leak
- Writing doesn't dirty pages. Reading dirties pages.
- We should dirty the pages after the IO completion, not before
(Busy-waiting for disk I/O completion isn't very polite.)
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It may suck something awful, but it shouldn't taint the kernel.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
migration_cost prints after every CPU hotplug event. Make it print only
once at boot.
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.
As a preparation for changing that, we need to convert various 0 -> NR_CPUS
loops to use for_each_cpu().
(The above only applies to users of asm-generic/percpu.h. powerpc has gone it
alone and is presently only allocating memory for present CPUs, so it's
currently corrupting memory).
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: William Irwin <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Five callsites. I dunno how all this crap got back in there :(
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kernel/cpuset.c:644:38: warning: non-ANSI function declaration of function 'cpuset_update_task_memory_state'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- In case of a negative nsec value the result of the division must be
normalized.
- Remove inline from an exported function.
Signed-off-by: George Anzinger <george@wildturkeyranch.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When one module exports a function symbol and another module uses that
symbol then kallsyms shows the symbol twice. Once from the consumer with a
type of 'U' and once from the provider with a type of 't' or 'T'. On most
architectures, both entries have the same address so it does not matter
which one is returned by kallsyms_lookup_name(). But on architectures with
function descriptors, the 'U' entry points to the descriptor, not to the
code body, which is not what we want.
IA64 # grep -w qla2x00_remove_one /proc/kallsyms
a000000208c25ef8 U qla2x00_remove_one [qla2300] <= descriptor
a000000208bf44c0 t qla2x00_remove_one [qla2xxx] <= function body
Tell kallsyms_lookup_name() to ignore type U entries in modules.
Signed-off-by: Keith Owens <kaos@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When two function-return probes are inserted on kfree()[1] and the second
on say, sys_link()[2], and later [2] is unregistered, we have a deadlock as
kfree is called with the kretprobe_lock held and the function-return probe
on kfree will also try to grab the same lock.
However, we can move the kfree() during unregistration to outside the
spinlock as we are sure that no instances from the free list will be used
after synchronized_sched() returns during the unregistration process.
Thanks to Masami Hiramatsu for spotting this.
Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
kernel/kprobes.c:353: warning: 'pre_handler_kretprobe' defined but not used
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Acked-by: "Keshavamurthy, Anil S" <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently the zone_reclaim code has a fixed window of 30 seconds of off node
allocations should a local zone have no unused pagecache pages left. Reclaim
will be attempted again after this timeout period to avoid repeated useless
scans for memory. This is also useful to established sufficiently large off
node allocation chunks to relieve the local node.
It may be beneficial to adjust that time period for some special situations.
For example if memory use was exceeding node capacity one may want to give up
for longer periods of time. If memory spikes intermittendly then one may want
to shorten the time period to reduce the number of off node allocations.
This patch allows just that....
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- If we only reclaim nr_pages then its okay to stay on node.
Switch from > to >= for the comparison.
- vm_table[] entry for zone_reclaim_mode is a bit screwed up.
- Add empty lines around shrink_zone to show that this is the
central function to be called.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Prevent the kernel from setting the log level to 10 unconditionally during
suspend/resume which was needed in the past for debugging, but generally is
undesirable.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Change sched_getaffinity() so that it returns a bitmap that indicates the
legally schedulable cpus that a task is allowed to run on.
Without this patch, if CONFIG_HOTPLUG_CPU is enabled, sched_getaffinity()
unconditionally returns (at least on IA64) a mask with NR_CPUS bits set.
This conveys no useful infornmation except for a kernel compile option.
This fixes a breakage we obseved running recent kernels. We have MPI jobs
that use sched_getaffinity() to determine where to place their threads.
Placing them on non-existant cpus is problematic :-)
Signed-off-by: Jack Steiner <steiner@sgi.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This function is neither used nor has any real contents.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The expiry time for relative timers with SIGEV_NONE set was never
updated to the correct value.
Pointed out by George Anzinger.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
At some point we added credits to people who actively helped to bring
k/hr-timers along. This was lost in the big code revamp. Add it back.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Clean up the interface to hrtimers by changing the init code to pass the mode
as well as the clock. This allow the init code to select the correct base and
eliminates extra timer re-init code in posix-timers. We also simplify the
restart interface nanosleep use.
Signed-off-by: George Anzinger <george@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
From: Steven Rostedtrostedt@goodmis.org <rostedt@goodmis.org>
CPU0 expires a posix-timer and runs the callback function. The signal is
queued.
After releasing the posix-timer lock and before returning to hrtimer_run_queue
CPU0 gets interrupted. CPU1 delivers the queued signal and rearms the timer.
CPU0 comes back to hrtimer_run_queue and sets the timer state to expired.
The next modification of the timer can result in an oops, because the state
information is wrong.
Keep track of state = RUNNING and check if the state has been in the return
path of hrtimer_run_queue. In case the state has been changed, ignore a
restart request and do not touch the state variable.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This resolves bugzilla bug#5617. The oldvalue of the timer was read after the
timer was cancelled, so the remaining time was always zero.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fixup the conversion of posix-timers to hrtimers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The itimer conversion removed the locking which protects the timer and
variables in the shared signal structure. Steven Rostedt found the problem in
the latest -rt patches.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make swsusp use bytes as the image size units, which is needed for future
compatibility.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I get storms of warnings from local_bh_enable(). Better-tested patches,
please.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
rcu_torture_lock is used in a softirq-unsafe manner, but it is also
taken by rcu_torture_cb(), which may execute in softirq-context,
resulting in potential deadlocks.
The fix is to acquire rcu_torture_lock in a softirq-safe manner. With
this fix applied, the rcu-torture code passes validation.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
RCU task-struct freeing can call free_uid(), which is taking
uidhash_lock - while other users of uidhash_lock are softirq-unsafe.
The fix is to always take the uidhash_spinlock in a softirq-safe manner.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This reduces the amount of time the migration cost calculations cost
during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
EDAC requires a way to scrub memory if an ECC error is found and the chipset
does not do the work automatically. That means rewriting memory locations
atomically with respect to all CPUs _and_ bus masters. That means we can't
use atomic_add(foo, 0) as it gets optimised for non-SMP
This adds a function to include/asm-foo/atomic.h for the platforms currently
supported which implements a scrub of a mapped block.
It also adjusts a few other files include order where atomic.h is included
before types.h as this now causes an error as atomic_scrub uses u32.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The TIF_RESTORE_SIGMASK flag allows us to have a generic implementation of
sys_rt_sigsuspend() instead of duplicating it for each architecture. This
provides such an implementation and makes arch/powerpc use it.
It also tidies up the ppc32 sys_sigsuspend() to use TIF_RESTORE_SIGMASK.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Currently, a negative policy argument passed into the
'sys_sched_setscheduler()' system call, will return with success. However,
the manpage for 'sys_sched_setscheduler' says:
EINVAL The scheduling policy is not one of the recognized policies, or the
parameter p does not make sense for the policy.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
proc support for zone reclaim
This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be
used to override the automatic determination of the zone reclaim made on
bootup.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Build kernel/intermodule.c only when required.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix a comment which missed an update cycle somewhere.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The problem, reported in:
http://bugzilla.kernel.org/show_bug.cgi?id=5859
and by various other email messages and lkml posts is that the cpuset hook
in the oom (out of memory) code can try to take a cpuset semaphore while
holding the tasklist_lock (a spinlock).
One must not sleep while holding a spinlock.
The fix seems easy enough - move the cpuset semaphore region outside the
tasklist_lock region.
This required a few lines of mechanism to implement. The oom code where
the locking needs to be changed does not have access to the cpuset locks,
which are internal to kernel/cpuset.c only. So I provided a couple more
cpuset interface routines, available to the rest of the kernel, which
simple take and drop the lock needed here (cpusets callback_sem).
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove useless spin_retry_counter and fix compilation for UP kernels.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Remove the "inline" keyword from a bunch of big functions in the kernel with
the goal of shrinking it by 30kb to 40kb
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add a new SCHED_BATCH (3) scheduling policy: such tasks are presumed
CPU-intensive, and will acquire a constant +5 priority level penalty. Such
policy is nice for workloads that are non-interactive, but which do not
want to give up their nice levels. The policy is also useful for workloads
that want a deterministic scheduling policy without interactivity causing
extra preemptions (between that workload's tasks).
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Michael Kerrisk <mtk-manpages@gmx.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I tried to send the forcedeth maintainer an email, but it came back with:
"The mail address manfreds@colorfullife.com is not read anymore.
Please resent your mail to manfred@ instead of manfreds@."
This patch fixes this.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
This patch fixes a typo in the dependencies of SOFTWARE_SUSPEND.
This patch is based on a report by
Jean-Luc Leger <reiga@dspnet.fr.eu.org>.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
)
From: Nick Piggin <nickpiggin@yahoo.com.au>
Track the last waker CPU, and only consider wakeup-balancing if there's a
match between current waker CPU and the previous waker CPU. This ensures
that there is some correlation between two subsequent wakeup events before
we move the task. Should help random-wakeup workloads on large SMP
systems, by reducing the migration attempts by a factor of nr_cpus.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
)
From: Ingo Molnar <mingo@elte.hu>
This is the latest version of the scheduler cache-hot-auto-tune patch.
The first problem was that detection time scaled with O(N^2), which is
unacceptable on larger SMP and NUMA systems. To solve this:
- I've added a 'domain distance' function, which is used to cache
measurement results. Each distance is only measured once. This means
that e.g. on NUMA distances of 0, 1 and 2 might be measured, on HT
distances 0 and 1, and on SMP distance 0 is measured. The code walks
the domain tree to determine the distance, so it automatically follows
whatever hierarchy an architecture sets up. This cuts down on the boot
time significantly and removes the O(N^2) limit. The only assumption
is that migration costs can be expressed as a function of domain
distance - this covers the overwhelming majority of existing systems,
and is a good guess even for more assymetric systems.
[ People hacking systems that have assymetries that break this
assumption (e.g. different CPU speeds) should experiment a bit with
the cpu_distance() function. Adding a ->migration_distance factor to
the domain structure would be one possible solution - but lets first
see the problem systems, if they exist at all. Lets not overdesign. ]
Another problem was that only a single cache-size was used for measuring
the cost of migration, and most architectures didnt set that variable
up. Furthermore, a single cache-size does not fit NUMA hierarchies with
L3 caches and does not fit HT setups, where different CPUs will often
have different 'effective cache sizes'. To solve this problem:
- Instead of relying on a single cache-size provided by the platform and
sticking to it, the code now auto-detects the 'effective migration
cost' between two measured CPUs, via iterating through a wide range of
cachesizes. The code searches for the maximum migration cost, which
occurs when the working set of the test-workload falls just below the
'effective cache size'. I.e. real-life optimized search is done for
the maximum migration cost, between two real CPUs.
This, amongst other things, has the positive effect hat if e.g. two
CPUs share a L2/L3 cache, a different (and accurate) migration cost
will be found than between two CPUs on the same system that dont share
any caches.
(The reliable measurement of migration costs is tricky - see the source
for details.)
Furthermore i've added various boot-time options to override/tune
migration behavior.
Firstly, there's a blanket override for autodetection:
migration_cost=1000,2000,3000
will override the depth 0/1/2 values with 1msec/2msec/3msec values.
Secondly, there's a global factor that can be used to increase (or
decrease) the autodetected values:
migration_factor=120
will increase the autodetected values by 20%. This option is useful to
tune things in a workload-dependent way - e.g. if a workload is
cache-insensitive then CPU utilization can be maximized by specifying
migration_factor=0.
I've tested the autodetection code quite extensively on x86, on 3
P3/Xeon/2MB, and the autodetected values look pretty good:
Dual Celeron (128K L2 cache):
---------------------
migration cost matrix (max_cache_size: 131072, cpu: 467 MHz):
---------------------
[00] [01]
[00]: - 1.7(1)
[01]: 1.7(1) -
---------------------
cacheflush times [2]: 0.0 (0) 1.7 (1784008)
---------------------
Here the slow memory subsystem dominates system performance, and even
though caches are small, the migration cost is 1.7 msecs.
Dual HT P4 (512K L2 cache):
---------------------
migration cost matrix (max_cache_size: 524288, cpu: 2379 MHz):
---------------------
[00] [01] [02] [03]
[00]: - 0.4(1) 0.0(0) 0.4(1)
[01]: 0.4(1) - 0.4(1) 0.0(0)
[02]: 0.0(0) 0.4(1) - 0.4(1)
[03]: 0.4(1) 0.0(0) 0.4(1) -
---------------------
cacheflush times [2]: 0.0 (33900) 0.4 (448514)
---------------------
Here it can be seen that there is no migration cost between two HT
siblings (CPU#0/2 and CPU#1/3 are separate physical CPUs). A fast memory
system makes inter-physical-CPU migration pretty cheap: 0.4 msecs.
8-way P3/Xeon [2MB L2 cache]:
---------------------
migration cost matrix (max_cache_size: 2097152, cpu: 700 MHz):
---------------------
[00] [01] [02] [03] [04] [05] [06] [07]
[00]: - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
[01]: 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
[02]: 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1)
[03]: 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1) 19.2(1)
[04]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1) 19.2(1)
[05]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1) 19.2(1)
[06]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) - 19.2(1)
[07]: 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) 19.2(1) -
---------------------
cacheflush times [2]: 0.0 (0) 19.2 (19281756)
---------------------
This one has huge caches and a relatively slow memory subsystem - so the
migration cost is 19 msecs.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com>
Cc: <wilder@us.ibm.com>
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roman Zippel pointed out that the missing lower limit of intervals
leads to an accounting error in the overrun count. Enforce the lower
limit of intervals to resolution in the timer forwarding code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the storage format of the per base resolution to ktime_t to
make it easier accessible in the hrtimers code.
Change the resolution from (NSEC_PER_SEC/HZ) to TICK_NSEC as Roman
pointed out. TICK_NSEC is closer to the real resolution.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The list_head in the hrtimer structure was introduced for easy access
to the first timer with the further extensions of real high resolution
timers in mind, but it turned out in the course of development that
it is not necessary for the standard use case. Remove the list head
and access the first expiry timer by a datafield in the timer base.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
vSMP specific alignment patch to
1. Define INTERNODE_CACHE_SHIFT for vSMP
2. Use this for alignment of critical structures
3. Use INTERNODE_CACHE_SHIFT for ARCH_MIN_TASKALIGN,
and let the slab align task_struct allocations to the internode cacheline size
4. Introduce and use ARCH_MIN_MMSTRUCT_ALIGN for mm_struct slab allocations.
Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com>
Signed-off-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
They are referred to often so avoid potential false sharing for them.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
- Move capable() from sched.h to capability.h;
- Use <linux/capability.h> where capable() is used
(in include/, block/, ipc/, kernel/, a few drivers/,
mm/, security/, & sound/;
many more drivers/ to go)
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Uninline capable(). Saves 2K of kernel text on a generic .config, and 1K on a
tiny config. In addition it makes the use of capable more consistent between
CONFIG_SECURITY and !CONFIG_SECURITY
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When a kprobes modules is written in such a way that probes are inserted on
itself, then unload of that moudle was not possible due to reference
couning on the same module.
The below patch makes a check and incrementes the module refcount only if
it is not a self probed module.
We need to allow modules to probe themself for kprobes performance
measurements
This patch has been tested on several x86_64, ppc64 and IA64 architectures.
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
