Commit Graph

343699 Commits

Author SHA1 Message Date
Alexander Graf 9d98b3ff94 KVM: PPC: e500: Call kvmppc_mmu_map for initial mapping
When emulating tlbwe, we want to automatically map the entry that just got
written in our shadow TLB map, because chances are quite high that it's
going to be used very soon.

Today this happens explicitly, duplicating all the logic that is in
kvmppc_mmu_map() already. Just call that one instead.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-24 19:23:31 +01:00
Alexander Graf 2c378fd779 KVM: PPC: E500: Propagate errors when shadow mapping
When shadow mapping a page, mapping this page can fail. In that case we
don't have a shadow map.

Take this case into account, otherwise we might end up writing bogus TLB
entries into the host TLB.

While at it, also move the write_stlbe() calls into the respective TLBn
handlers.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-24 19:23:30 +01:00
Alexander Graf 523f0e5421 KVM: PPC: E500: Explicitly mark shadow maps invalid
When we invalidate shadow TLB maps on the host, we don't mark them
as not valid. But we should.

Fix this by removing the E500_TLB_VALID from their flags when
invalidating.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-24 19:23:30 +01:00
Alexander Graf 9445ef0181 KVM: PPC: E500: Move write_stlbe higher
Later patches want to call the function and it doesn't have
dependencies on anything below write_host_tlbe.

Move it higher up in the file.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-24 19:23:29 +01:00
Gleb Natapov 141687869f KVM: VMX: set vmx->emulation_required only when needed.
If emulate_invalid_guest_state=false vmx->emulation_required is never
actually used, but it ends up to be always set to true since
handle_invalid_guest_state(), the only place it is reset back to
false, is never called. This, besides been not very clean, makes vmexit
and vmentry path to check emulate_invalid_guest_state needlessly.

The patch fixes that by keeping emulation_required coherent with
emulate_invalid_guest_state setting.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:31 -02:00
Gleb Natapov 378a8b099f KVM: x86: fix use of uninitialized memory as segment descriptor in emulator.
If VMX reports segment as unusable, zero descriptor passed by the emulator
before returning. Such descriptor will be considered not present by the
emulator.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:31 -02:00
Gleb Natapov 91b0aa2ca6 KVM: VMX: rename fix_pmode_dataseg to fix_pmode_seg.
The function deals with code segment too.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:30 -02:00
Gleb Natapov 25391454e7 KVM: VMX: don't clobber segment AR of unusable segments.
Usability is returned in unusable field, so not need to clobber entire
AR. Callers have to know how to deal with unusable segments already
since if emulate_invalid_guest_state=true AR is not zeroed.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:28 -02:00
Gleb Natapov 218e763f45 KVM: VMX: skip vmx->rmode.vm86_active check on cr0 write if unrestricted guest is enabled
vmx->rmode.vm86_active is never true is unrestricted guest is enabled.
Make it more explicit that neither enter_pmode() nor enter_rmode() is
called in this case.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:28 -02:00
Gleb Natapov 286da4156d KVM: VMX: remove hack that disables emulation on vcpu reset/init
There is no reason for it. If state is suitable for vmentry it
will be detected during guest entry and no emulation will happen.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:27 -02:00
Gleb Natapov c5e97c80b5 KVM: VMX: if unrestricted guest is enabled vcpu state is always valid.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:26 -02:00
Gleb Natapov 2f143240cb KVM: VMX: reset CPL only on CS register write.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:26 -02:00
Gleb Natapov 1f3141e80b KVM: VMX: remove special CPL cache access during transition to real mode.
Since vmx_get_cpl() always returns 0 when VCPU is in real mode it is no
longer needed. Also reset CPL cache to zero during transaction to
protected mode since transaction may happen while CS.selectors & 3 != 0,
but in reality CPL is 0.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-24 00:40:25 -02:00
Avi Kivity 158de57f90 KVM: x86 emulator: convert a few freestanding emulations to fastop
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:40 -02:00
Avi Kivity 34b77652b9 KVM: x86 emulator: rearrange fastop definitions
Make fastop opcodes usable in other emulations.

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:39 -02:00
Avi Kivity 4d7583493e KVM: x86 emulator: convert 2-operand IMUL to fastop
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:38 -02:00
Avi Kivity 11c363ba8f KVM: x86 emulator: convert BT/BTS/BTR/BTC/BSF/BSR to fastop
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:37 -02:00
Avi Kivity 95413dc413 KVM: x86 emulator: convert INC/DEC to fastop
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:37 -02:00
Avi Kivity 9ae9febae9 KVM: x86 emulator: covert SETCC to fastop
This is a bit of a special case since we don't have the usual
byte/word/long/quad switch; instead we switch on the condition code embedded
in the instruction.

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:36 -02:00
Avi Kivity 007a3b5475 KVM: x86 emulator: convert shift/rotate instructions to fastop
SHL, SHR, ROL, ROR, RCL, RCR, SAR, SAL

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:35 -02:00
Avi Kivity 0bdea06892 KVM: x86 emulator: Convert SHLD, SHRD to fastop
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23 22:15:33 -02:00
Xiao Guangrong 93c05d3ef2 KVM: x86: improve reexecute_instruction
The current reexecute_instruction can not well detect the failed instruction
emulation. It allows guest to retry all the instructions except it accesses
on error pfn

For example, some cases are nested-write-protect - if the page we want to
write is used as PDE but it chains to itself. Under this case, we should
stop the emulation and report the case to userspace

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-21 22:58:33 -02:00
Xiao Guangrong 95b3cf69bd KVM: x86: let reexecute_instruction work for tdp
Currently, reexecute_instruction refused to retry all instructions if
tdp is enabled. If nested npt is used, the emulation may be caused by
shadow page, it can be fixed by dropping the shadow page. And the only
condition that tdp can not retry the instruction is the access fault
on error pfn

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-21 22:58:32 -02:00
Xiao Guangrong 22368028fe KVM: x86: clean up reexecute_instruction
Little cleanup for reexecute_instruction, also use gpa_to_gfn in
retry_instruction

Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-21 22:58:31 -02:00
Takuya Yoshikawa a843fac253 KVM: set_memory_region: Remove unnecessary variable memslot
One such variable, slot, is enough for holding a pointer temporarily.
We also remove another local variable named slot, which is limited in
a block, since it is confusing to have the same name in this function.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17 14:27:59 +02:00
Takuya Yoshikawa 0a706beefb KVM: set_memory_region: Don't check for overlaps unless we create or move a slot
Don't need the check for deleting an existing slot or just modifiying
the flags.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17 14:27:50 +02:00
Takuya Yoshikawa 0ea75e1d26 KVM: set_memory_region: Don't jump to out_free unnecessarily
This makes the separation between the sanity checks and the rest of the
code a bit clearer.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17 14:27:43 +02:00
Cong Ding a046b816a4 KVM: s390: kvm/sigp.c: fix memory leakage
the variable inti should be freed in the branch CPUSTAT_STOPPED.

Signed-off-by: Cong Ding <dinggnu@gmail.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-17 08:41:48 +02:00
Takuya Yoshikawa 6b81b05e44 KVM: MMU: Conditionally reschedule when kvm_mmu_slot_remove_write_access() takes a long time
If the userspace starts dirty logging for a large slot, say 64GB of
memory, kvm_mmu_slot_remove_write_access() needs to hold mmu_lock for
a long time such as tens of milliseconds.  This patch controls the lock
hold time by asking the scheduler if we need to reschedule for others.

One penalty for this is that we need to flush TLBs before releasing
mmu_lock.  But since holding mmu_lock for a long time does affect not
only the guest, vCPU threads in other words, but also the host as a
whole, we should pay for that.

In practice, the cost will not be so high because we can protect a fair
amount of memory before being rescheduled: on my test environment,
cond_resched_lock() was called only once for protecting 12GB of memory
even without THP.  We can also revisit Avi's "unlocked TLB flush" work
later for completely suppressing extra TLB flushes if needed.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:14:28 +02:00
Takuya Yoshikawa 9d1beefb71 KVM: Make kvm_mmu_slot_remove_write_access() take mmu_lock by itself
Better to place mmu_lock handling and TLB flushing code together since
this is a self-contained function.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:14:17 +02:00
Takuya Yoshikawa b34cb590fb KVM: Make kvm_mmu_change_mmu_pages() take mmu_lock by itself
No reason to make callers take mmu_lock since we do not need to protect
kvm_mmu_change_mmu_pages() and kvm_mmu_slot_remove_write_access()
together by mmu_lock in kvm_arch_commit_memory_region(): the former
calls kvm_mmu_commit_zap_page() and flushes TLBs by itself.

Note: we do not need to protect kvm->arch.n_requested_mmu_pages by
mmu_lock as can be seen from the fact that it is read locklessly.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:14:09 +02:00
Takuya Yoshikawa e12091ce7b KVM: Remove unused slot_bitmap from kvm_mmu_page
Not needed any more.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:13:58 +02:00
Takuya Yoshikawa b99db1d352 KVM: MMU: Make kvm_mmu_slot_remove_write_access() rmap based
This makes it possible to release mmu_lock and reschedule conditionally
in a later patch.  Although this may increase the time needed to protect
the whole slot when we start dirty logging, the kernel should not allow
the userspace to trigger something that will hold a spinlock for such a
long time as tens of milliseconds: actually there is no limit since it
is roughly proportional to the number of guest pages.

Another point to note is that this patch removes the only user of
slot_bitmap which will cause some problems when we increase the number
of slots further.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:13:47 +02:00
Takuya Yoshikawa 245c3912ea KVM: MMU: Remove unused parameter level from __rmap_write_protect()
No longer need to care about the mapping level in this function.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:13:31 +02:00
Takuya Yoshikawa c972f3b125 KVM: Write protect the updated slot only when dirty logging is enabled
Calling kvm_mmu_slot_remove_write_access() for a deleted slot does
nothing but search for non-existent mmu pages which have mappings to
that deleted memory; this is safe but a waste of time.

Since we want to make the function rmap based in a later patch, in a
manner which makes it unsafe to be called for a deleted slot, we makes
the caller see if the slot is non-zero and being dirty logged.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-14 11:13:15 +02:00
Gleb Natapov aa11e3a8a6 Merge branch 'kvm-ppc-next' of https://github.com/agraf/linux-2.6 into queue 2013-01-14 11:01:26 +02:00
Cornelia Huck f79ed82da4 KVM: trace: Fix exit decoding.
trace_kvm_userspace_exit has been missing the KVM_EXIT_WATCHDOG exit.

CC: Bharat Bhushan <r65777@freescale.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10 15:51:11 -02:00
Xiao Guangrong 7751babd3c KVM: MMU: fix infinite fault access retry
We have two issues in current code:
- if target gfn is used as its page table, guest will refault then kvm will use
  small page size to map it. We need two #PF to fix its shadow page table

- sometimes, say a exception is triggered during vm-exit caused by #PF
  (see handle_exception() in vmx.c), we remove all the shadow pages shadowed
  by the target gfn before go into page fault path, it will cause infinite
  loop:
  delete shadow pages shadowed by the gfn -> try to use large page size to map
  the gfn -> retry the access ->...

To fix these, we can adjust page size early if the target gfn is used as page
table

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10 15:28:30 -02:00
Xiao Guangrong c22885050e KVM: MMU: fix Dirty bit missed if CR0.WP = 0
If the write-fault access is from supervisor and CR0.WP is not set on the
vcpu, kvm will fix it by adjusting pte access - it sets the W bit on pte
and clears U bit. This is the chance that kvm can change pte access from
readonly to writable

Unfortunately, the pte access is the access of 'direct' shadow page table,
means direct sp.role.access = pte_access, then we will create a writable
spte entry on the readonly shadow page table. It will cause Dirty bit is
not tracked when two guest ptes point to the same large page. Note, it
does not have other impact except Dirty bit since cr0.wp is encoded into
sp.role

It can be fixed by adjusting pte access before establishing shadow page
table. Also, after that, no mmu specified code exists in the common function
and drop two parameters in set_spte

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-10 15:28:08 -02:00
Alexander Graf 324b3e6316 KVM: PPC: BookE: Add EPR ONE_REG sync
We need to be able to read and write the contents of the EPR register
from user space.

This patch implements that logic through the ONE_REG API and declares
its (never implemented) SREGS counterpart as deprecated.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:42:33 +01:00
Alexander Graf 1c81063655 KVM: PPC: BookE: Implement EPR exit
The External Proxy Facility in FSL BookE chips allows the interrupt
controller to automatically acknowledge an interrupt as soon as a
core gets its pending external interrupt delivered.

Today, user space implements the interrupt controller, so we need to
check on it during such a cycle.

This patch implements logic for user space to enable EPR exiting,
disable EPR exiting and EPR exiting itself, so that user space can
acknowledge an interrupt when an external interrupt has successfully
been delivered into the guest vcpu.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:42:31 +01:00
Alexander Graf 37ecb257f6 KVM: PPC: BookE: Emulate mfspr on EPR
The EPR register is potentially valid for PR KVM as well, so we need
to emulate accesses to it. It's only defined for reading, so only
handle the mfspr case.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:42:30 +01:00
Alexander Graf b8c649a99d KVM: PPC: BookE: Allow irq deliveries to inject requests
When injecting an interrupt into guest context, we usually don't need
to check for requests anymore. At least not until today.

With the introduction of EPR, we will have to create a request when the
guest has successfully accepted an external interrupt though.

So we need to prepare the interrupt delivery to abort guest entry
gracefully. Otherwise we'd delay the EPR request.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:42:21 +01:00
Mihai Caraman f2be655004 KVM: PPC: Fix mfspr/mtspr MMUCFG emulation
On mfspr/mtspr emulation path Book3E's MMUCFG SPR with value 1015 clashes
with G4's MSSSR0 SPR. Move MSSSR0 emulation from generic part to Books3S.
MSSSR0 also clashes with Book3S's DABRX SPR. DABRX was not explicitly
handled so Book3S execution flow will behave as before.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:30:11 +01:00
Alexander Graf 50c7bb80b5 KVM: PPC: Book3S: PR: Enable alternative instruction for SC 1
When running on top of pHyp, the hypercall instruction "sc 1" goes
straight into pHyp without trapping in supervisor mode.

So if we want to support PAPR guest in this configuration we need to
add a second way of accessing PAPR hypercalls, preferably with the
exact same semantics except for the instruction.

So let's overlay an officially reserved instruction and emulate PAPR
hypercalls whenever we hit that one.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:15:08 +01:00
Alexander Graf 5a33169ed2 KVM: PPC: Only WARN on invalid emulation
When we hit an emulation result that we didn't expect, that is an error,
but it's nothing that warrants a BUG(), because it can be guest triggered.

So instead, let's only WARN() the user that this happened.

Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:15:08 +01:00
Mihai Caraman 68e2ffed35 KVM: PPC: Fix SREGS documentation reference
Reflect the uapi folder change in SREGS API documentation.

Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com>
Reviewed-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10 13:15:08 +01:00
Christian Borntraeger b26ba22bb4 KVM: s390: Gracefully handle busy conditions on ccw_device_start
In rare cases a virtio command might try to issue a ccw before a former
ccw was answered with a tsch. This will cause CC=2 (busy). Lets just
retry in that case.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 18:40:19 -02:00
Cornelia Huck 73fa21ea4f KVM: s390: Dynamic allocation of virtio-ccw I/O data.
Dynamically allocate any data structures like ccw used when
doing channel I/O. Otherwise, we'd need to add extra serialization
for the different callbacks using the same data structures.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 18:40:18 -02:00
Avi Kivity fb864fbc72 KVM: x86 emulator: convert basic ALU ops to fastop
Opcodes:
	TEST
	CMP
	ADD
	ADC
	SUB
	SBB
	XOR
	OR
	AND

Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-09 17:39:30 -02:00