Commit Graph

220 Commits

Author SHA1 Message Date
Biwen Li 7b0b551dbc rtc: fsl-ftm-alarm: add FTM alarm driver
For the platforms including LS1012A, LS1021A, LS1028A, LS1043A,
LS1046A, LS1088A, LS208xA that has the FlexTimer
module, implementing alarm functions within RTC subsystem
to wakeup the system when system going to sleep (work with RCPM driver).

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Link: https://lore.kernel.org/r/20190813030157.48590-1-biwen.li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-23 16:20:50 +02:00
Neil Armstrong 6ef35398e8 rtc: Add Amlogic Virtual Wake RTC
The Amlogic Meson GX SoCs uses a special register to store the
time in seconds to wakeup after a system suspend.

In order to be able to reuse the RTC wakealarm feature, this
driver implements a fake RTC device which uses the system time
to deduce a suspend delay.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: rebase to v5.3-rc, rework and modernization]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20190812232850.8016-3-khilman@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-22 23:08:32 +02:00
Arnd Bergmann cb3cab0614 rtc: remove w90x900/nuc900 driver
The ARM w90x900 platform is getting removed, so this driver is obsolete.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190809202749.742267-15-arnd@arndb.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-08-12 22:56:07 +02:00
Matti Vaittinen 32a4a4ebf7 rtc: bd70528: Initial support for ROHM bd70528 RTC
Support RTC block in ROHM bd70528 power management IC. Support
getting and setting the time and date as well as arming an alarm
which can also be used to wake the PMIC from standby state.

HW supports wake interrupt only for the next 24 hours (sec, minute
and hour information only) so we limit also the alarm interrupt to
this 24 hours for the sake of consistency.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-06-27 10:57:24 +01:00
Joel Stanley 184a182ed5 rtc: Add ASPEED RTC driver
Read and writes the time to the non-battery backed RTC in the ASPEED BMC
system on chip families.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-04-04 10:07:10 +02:00
Linus Torvalds f47d633134 chrome platform changes for v5.1
1. SPDX identifier cleanup for platform/chrome
 2. Cleanup series between mfd and chrome/platform, moving
    cros-ec attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome.
 3. Wilco EC driver
 4. Maintainership change to new group repository.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE6gYDF28Li+nEiKLaHwn1ewov5lgFAlyG4dIACgkQHwn1ewov
 5lhoqA//SXO5HU1qkhfvwUKyNsYxtIj4wDQF+j9tAPbVaOOaztq0b5D1PQgDGcEL
 SDl9FAXZtwhmPr5xiGPrPUxwn4JG+tUcgSSgIOCtClpA/SZUPt2wekAB64hLt1ui
 nkBRSgeRnXeeRE0nDh7EUrwAeaYj6yCg4AS8FMHmjWTG0tI6iivhuc39v/zDV8Br
 f4chOu/KEWS/EhItVlDBHE0mYDW2JGLSD3nqJR9MdujvYzbkN5WusJIXBDK6MOUl
 z1gqptVYyq/FQOQOCZ+vHjTNVYQ3N3NbPOnnQn4xAyYiqTQJVJv+x6dd7htncjVO
 567PFbbqbKzqrGWZOrdksxVa4JkIGfcgNG2mskRYKpEtHVOpMlHxwHqKv/93TQvw
 F0z4+43ZeAo0Fx2k+oOiDylpClDvUVOeH0z5suqIK15MZbpfWZF6d38Pz1Zwd8hY
 0TEldpyH83HiXylEuYabBwq3ABfj4VncYcMWfaW517LUrnH9nkJDNOlXQFreGTPt
 uHQPz+Xzfirk9wNwlEtfhqh3fjRWIfmiHc8bLmCB2XuJqavF0pozoQnJprw+72LR
 h4ALkUBr8laVfXYgG8SzNm/K4DlMjKqvJRY6m2b7AY8CTVgMur7ct0WJsvmECF+4
 2XDDvHwkQJt3XifVLpLgFRfR5YRlFxjwMNS8Zq0Bb/gjRqSSCo4=
 =2nC0
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

 - SPDX identifier cleanup for platform/chrome

 - Cleanup series between mfd and chrome/platform, moving cros-ec
   attributes from mfd/cros_ec_dev to sub-drivers in platform/chrome

 - Wilco EC driver

 - Maintainership change to new group repository

* tag 'tag-chrome-platform-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: fix wilco-ec dependencies
  platform/chrome: wilco_ec: Add RTC driver
  platform/chrome: wilco_ec: Add support for raw commands in debugfs
  platform/chrome: Add new driver for Wilco EC
  platform/chrome: cros_ec: Remove cros_ec dependency in lpc_mec
  MAINTAINERS: chrome-platform: change the git tree to a chrome-platform group git tree
  platform/chrome: cros_ec_sysfs: remove pr_fmt() define
  platform/chrome: cros_ec_lightbar: remove pr_fmt() define
  platform/chrome: cros_kbd_led_backlight: switch to SPDX identifier
  platform/chrome: cros_ec_spi: switch to SPDX identifier
  platform/chrome: cros_ec_proto: switch to SPDX identifier
  platform/chrome: cros_ec_lpc: switch to SPDX identifier
  platform/chrome: cros_ec_i2c: switch to SPDX identifier
  platform/chrome: cros_ec_vbc: switch to SPDX identifier
  platform/chrome: cros_ec_sysfs: switch to SPDX identifier
  platform/chrome: cros_ec_lightbar: switch to SPDX identifier
  platform/chrome: cros_ec_debugfs: switch to SPDX identifier
  platform/chrome: cromeos_pstore: switch to SPDX identifier
2019-03-12 09:46:32 -07:00
Nick Crews 0d2f2a3da1 platform/chrome: wilco_ec: Add RTC driver
This Embedded Controller has an internal RTC that is exposed
as a standard RTC class driver with read/write functionality.

The driver is added to the drivers/rtc/ so that the maintainer of that
directory will be able to comment on this change, as that maintainer is
the expert on this system. In addition, the driver code is called
indirectly after a corresponding device is registered from core.c,
as opposed to core.c registering the driver callbacks directly.

To test:
> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

> hwclock --show --rtc /dev/rtc1
2007-12-31 16:01:20.460959-08:00
> hwclock --systohc --rtc /dev/rtc1
> hwclock --show --rtc /dev/rtc1
2018-11-29 17:08:00.780793-08:00

Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Nick Crews <ncrews@chromium.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fix the sparse warning: symbol 'wilco_ec_rtc_read/write' was not declared]
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2019-02-21 21:36:53 +01:00
Artem Panfilov 67075b63cc rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar
module with I2C interface.

Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-18 22:39:30 +01:00
Alexandre Belloni e6e7376cfd rtc: rv3028: add new driver
Add a driver for the MicroCrystal RV-3028. It is a SMT Real-Time Clock
Module that incorporates an integrated CMOS circuit together with an XTAL.
It has an i2c interface.

The driver handles date/time, alarms, trickle charging, timestamping,
frequency offset correction, EEPROM and NVRAM.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-17 21:29:10 +01:00
Martin Blumenstingl d8fe6009aa rtc: support for the Amlogic Meson RTC
Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8,
Meson8b and Meson8m2 SoCs.

The RTC is split in to two parts, which are both managed by this driver:
- the AHB front end
- and a simple serial connection to the actual registers

The RTC_COUNTER register which holds the time is 32-bits wide.

There are four 32-bit wide (in total: 16 bytes) "regmem" registers which
are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store
data which needs to survive a suspend / resume cycle.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[resurrected Ben's patches after 2 years]
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-02-11 09:41:21 +01:00
Jan Kotas 42986fb811 rtc: Add Cadence RTC driver
This patch adds a driver for Cadence RTC controller.

It can be enabled with RTC_DRV_CADENCE Kconfig option.
It supports waking system from sleep modes.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-22 19:18:27 +01:00
Dianlong Li 1d67a23210 rtc: sd3078: new driver.
The sd3078 is a combination RTC and SRAM device with I2C interface.

Signed-off-by: Dianlong Li <long17.cool@163.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-01-10 21:51:22 +01:00
Alexandre Belloni 36e14f5fdf rtc: rename core files
Rename core files so there is a clearer separation between the RTC core and
the RTC drivers.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-31 11:36:16 +01:00
Anson Huang e01b578195 rtc: add i.MX system controller RTC support
i.MX8QXP is an ARMv8 SoC which has a Cortex-M4 system controller
inside, the system controller is in charge of controlling power,
clock and secure rtc etc..

This patch adds i.MX system controller RTC driver support,
Linux kernel has to communicate with system controller via MU
(message unit) IPC to set/get RTC time and other alarm functions,
since the RTC set time needs to be done in secure EL3 mode (required
by system controller firmware) and alarm functions needs to be done
with general MU IRQ handle, these depend on other components which
are NOT ready, so this patch ONLY enables the RTC time read.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-12-20 12:47:40 +01:00
Alexandre Belloni db7a67b9c3 rtc: reorder Makefile entries
A few entries are not placed correctly, reorder them.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-09-28 14:20:58 +02:00
Linus Torvalds fbe173e3ff RTC for 4.17
Subsystem:
  - Add tracepoints
  - Rework of the RTC/nvmem API to allow drivers to discard struct nvmem_config
    after registration
  - New range API, drivers can now expose the useful range of the RTC
  - New offset API the core is now able to add an offset to the RTC time,
    modifying the supported range.
  - Multiple rtc_time64_to_tm fixes
  - Handle time_t overflow on 32 bit platforms in the core instead of letting
    drivers do crazy things.
  - remove rtc_control API
 
 New driver:
  - Intersil ISL12026
 
 Drivers:
  - Drivers exposing the RTC non volatile memory have been converted to use nvmem
  - Removed useless time and date validation
  - Removed an indirection pattern that was a cargo cult from ancient drivers
  - Removed VLA usage
  - Fixed a possible race condition in probe functions
  - AB8540 support is dropped from ab8500
  - pcf85363 now has alarm support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlrL3s4ACgkQAyWl4gNJ
 NJI+MxAAgc56UEXi5chqKpHE6GHL2aPWan9duHB6FmGrKWt/FJmpJ8UGylLFlvaW
 dpRGvW0Dynz45UztegcrbHMU6+B2O0hboL4/GVZpYAkcNAcu7Lf0ULho2rsQSDmW
 WJpemmdRxyQY1IkWmw7z7KAkMzhAfYZiVmWmVwMRZfMcKJ3DLEldfgRtkN+g0UdB
 tayWQY3mS02ki16e2figsgwZRmUUhQslDfpKlesInXOzUMmLgVWhf1QxJSEUcfs0
 AMp75vD2YvVJ/RHy/6BilQbqP9EVnaG4NHqJGFSOddazA7u+3HGubEFboI8NuPXb
 2fCvfrNux7pgtQsBF9dnpCqWlukE7sF5aDyIUvjYnr0vUm2D/CwdXglGvQSQVWea
 5GxPTWBdaCL0V7GD5OSZcfUGyz1TN/7NSUItdLSr9YK13dL+tqhcYYm5ytXJLzvO
 Z4GyUEoCOMprMJ9j5KU/TXSjauDmPDl8YZ5B93lPcNOh7y+b/2r3umBaInyZrFzX
 1WJ6FWtuhbRfEwuQtgQHBsobt9eTwZfo8C2y22HBo/fdWfBv45feiiHNXt3OVrA+
 aws6pwfVf1H0UsvpQkXtlPthAx3sbOTndDKAUhntb/U/zA9c7fTrfUyVOQ1bArJy
 p6tl/cmlpq68AjZB+0d3zUXQkQH4Syu+EqZrWItkE6XxZm+khDE=
 =l9i8
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "This contains a few series that have been in preparation for a while
  and that will help systems with RTCs that will fail in 2038, 2069 or
  2100.

  Subsystem:
   - Add tracepoints
   - Rework of the RTC/nvmem API to allow drivers to discard struct
     nvmem_config after registration
   - New range API, drivers can now expose the useful range of the RTC
   - New offset API the core is now able to add an offset to the RTC
     time, modifying the supported range.
   - Multiple rtc_time64_to_tm fixes
   - Handle time_t overflow on 32 bit platforms in the core instead of
     letting drivers do crazy things.
   - remove rtc_control API

  New driver:
   - Intersil ISL12026

  Drivers:
   - Drivers exposing the RTC non volatile memory have been converted to
     use nvmem
   - Removed useless time and date validation
   - Removed an indirection pattern that was a cargo cult from ancient
     drivers
   - Removed VLA usage
   - Fixed a possible race condition in probe functions
   - AB8540 support is dropped from ab8500
   - pcf85363 now has alarm support"

* tag 'rtc-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (128 commits)
  rtc: snvs: Fix usage of snvs_rtc_enable
  rtc: mt7622: fix module autoloading for OF platform drivers
  rtc: isl12022: use true and false for boolean values
  rtc: ab8500: Drop AB8540 support
  rtc: remove a warning during scripts/kernel-doc step
  rtc: 88pm860x: remove artificial limitation
  rtc: 88pm80x: remove artificial limitation
  rtc: st-lpc: remove artificial limitation
  rtc: mrst: remove artificial limitation
  rtc: mv: remove artificial limitation
  rtc: hctosys: Ensure system time doesn't overflow time_t
  parisc: time: stop validating rtc_time in .read_time
  rtc: pcf85063: fix clearing bits in pcf85063_start_clock
  rtc: at91sam9: Set name of regmap_config
  rtc: s5m: Remove VLA usage
  rtc: s5m: Move enum from rtc.h to rtc-s5m.c
  rtc: remove VLA usage
  rtc: Add useful timestamp definitions
  rtc: Add one offset seconds to expand RTC range
  rtc: Factor out the RTC range validation into rtc_valid_range()
  ...
2018-04-10 10:22:27 -07:00
Arnd Bergmann 111f750389 rtc: remove bfin driver
The blackfin architecture is getting removed, so this one is
now obsolete.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Aaron Wu <aaron.wu@analog.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:31 +02:00
Arnd Bergmann fca94ec613 rtc: remove tile driver
The tile architecture is getting removed, so this driver is
no longer needed.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-03-26 15:56:29 +02:00
David Daney 4731a43169 rtc: isl12026: new driver.
The ISL12026 is a combination RTC and EEPROM device with I2C
interface.  The standard RTC driver interface is provided.  The EEPROM
is accessed via the NVMEM interface.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-03-17 14:20:51 +01:00
Corentin Labbe 4402be2b4c rtc: remove rtc-at32ap700x
Since PLATFORM_AT32AP is an AVR32 platform which was removed, the
rtc driver rtc-at32ap700x is useless.
This patch remove it.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-19 09:59:32 +01:00
Patrick Bruenn 83c880f79e rtc: add mxc driver for i.MX53 SRTC
Neither rtc-imxdi, rtc-mxc nor rtc-snvs are compatible with i.MX53.

This is driver enables support for the low power domain SRTC features:
- 32-bit MSB of non-rollover time counter
- 32-bit alarm register

Select the new config option RTC_DRV_MXC_V2 to build this driver

Based on:
http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/drivers/rtc/rtc-mxc_v2.c?h=imx_2.6.35_11.09.01

Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2018-01-12 00:20:39 +01:00
Stephen Barber 6f2a71a31a rtc: cros-ec: add cros-ec-rtc driver.
On platforms with a Chrome OS EC, the EC can function as a simple RTC.
Add a basic driver with this functionality.

Signed-off-by: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-12-18 23:05:10 +01:00
Linus Torvalds 1b8c5cd890 RTC for 4.15
Subsystem:
  - Fix setting the alarm to the next expiring timer
 
 New driver:
  - Mediatek MT7622 RTC
  - NXP PCF85363
  - Spreadtrum SC27xx PMIC RTC
 
 Drivers:
  - Use generic nvmem to expose the Non volatile ram for ds1305, ds1511,
  m48t86 and omap
  - abx80x: solve possible race condition at probe
  - armada38x: support trimming the RTC oscillator
  - at91rm9200: fix reading the alarm value at boot
  - ds1511: allow waking platform
  - m41t80: rework square wave output
  - pcf8523: support trimming the RTC oscillator
  - pcf8563: fix clock output rate
  - pl031: make interrupt optional
  - xgene: fix suspend/resume
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAloTT70ACgkQAyWl4gNJ
 NJL7GhAAlHf/F+u4EfDyr7Rv4p0NlQrfmWVK021P4IuSyKispdQnCGWE0ZQJ2g6w
 8gNICyBiHubGVVwH9cHV3EhdCQ9DFqmMFrBn/+qbmRW2/U2pT0DuVk4u3TUHxBot
 e16T//k6xlT3vPjm5WYN/VZGKa2lxTio+EfSI914+LxBqs38YmKvwppTpWSIggQJ
 alGizKce+LZ/maORb11+GF+fgeXXek6gll0aJZQZW+JLbt0huQOBrOup8WrfWsrO
 Zj9fK6Xzzu0mAPhbu9D+keInLl1vavDdqWit/xYBOOXjsSRwU83e2NMHsZcTxIO5
 wU6qHZqK12fprOz+cl6xvXIy1jAAvPtpqGCTg/ssRsJTm52IuoqiCDuvJ84oAiNF
 TSFCxar0DHzAIQOP2rcWUdEEm7wPYfNn1XWR3KZ38pUKwxqa9PBKcT1Uro0naklL
 f7VHe/ZZJm/a7vgW8FunSXaSIvlbB8/ggC1aWpGpTXLJs1sTmg8vTv5Z+dSrkqa1
 ZJQd+YQgjIsxHNpoLqOHhho/oSun5c/YKzoc2eN/LSwKGv1jgCEi1v4iWNrv3pnS
 i12wef6mOrzg4iDKHx8rRXlkrb6wRgGG6ZB+yxIKjwB0ndUeSF9fCBkRBfgkyd5Q
 N3tHcqg2kbZaV1xl8stVkMrxbwtKHb3jTDH90e1SpzpoFXdjGXY=
 =tRVi
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "There is nothing scary this cycle, mostly driver fixes and updates.

  The core fix has been in for a while and has been tested on multiple
  kernel revisions by multiple teams.

  Core:
   - Fix setting the alarm to the next expiring timer

  New drivers:
   - Mediatek MT7622 RTC
   - NXP PCF85363
   - Spreadtrum SC27xx PMIC RTC

  Drivers updates:
   - Use generic nvmem to expose the Non volatile ram for ds1305,
     ds1511, m48t86 and omap
   - abx80x: solve possible race condition at probe
   - armada38x: support trimming the RTC oscillator
   - at91rm9200: fix reading the alarm value at boot
   - ds1511: allow waking platform
   - m41t80: rework square wave output
   - pcf8523: support trimming the RTC oscillator
   - pcf8563: fix clock output rate
   - pl031: make interrupt optional
   - xgene: fix suspend/resume"

* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  dt-bindings: rtc: imxdi: Improve the bindings text
  rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
  dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
  rtc: at91rm9200: fix reading alarm value
  rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
  rtc: sysfs: Use time64_t variables to set time/alarm
  rtc: xgene: mark PM functions as __maybe_unused
  rtc: xgene: Fix suspend/resume
  rtc: pcf8563: don't alway enable the alarm
  rtc: pcf8563: fix output clock rate
  rtc: rx8010: Fix for incorrect return value
  rtc: rx8010: Specify correct address for RX8010_RESV31
  rtc: rx8010: Remove duplicate define
  rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
  rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
  rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
  rtc: m41t80: fix m41t80_sqw_round_rate return value
  rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
  rtc: add support for NXP PCF85363 real-time clock
  rtc: omap: Support scratch registers
  ...
2017-11-22 20:58:23 -10:00
Baolin Wang 495bbde523 rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
This patch adds the Spreadtrum RTC driver, which embedded in the
Spreadtrum SC27xx series PMICs.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-20 22:47:50 +01:00
Eric Nelson a9687aa276 rtc: add support for NXP PCF85363 real-time clock
Note that alarms are not currently implemented.

64 bytes of nvmem is supported and exposed in
sysfs (# is the instance number, starting with 0):

	/sys/bus/nvmem/devices/pcf85363-#/nvmem

Signed-off-by: Eric Nelson <eric@nelint.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-11-08 07:52:22 +01:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sean Wang ba5d018135 rtc: mediatek: add driver for RTC on MT7622 SoC
This patch introduces the driver for the RTC on MT7622 SoC.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-10-26 10:43:29 +02:00
Andreas Färber ae930c912b rtc: Add Realtek RTD1295
Based on QNAP's arch/arm/mach-rtk119x/driver/rtk_rtc_drv.c code and
mach-rtk119x/driver/dc2vo/fpga/include/mis_reg.h register definitions.

The base year 2014 was observed on all of Zidoo X9S, ProBox2 Ava and
Beelink Lake I.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-05 09:55:02 +02:00
Miodrag Dinic f22d9cdcb5 rtc: goldfish: Add RTC driver for Android emulator
Add device driver for a virtual RTC device in Android emulator.

The compatible string used by OS for binding the driver is defined
as "google,goldfish-rtc".

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Goran Ferenc <goran.ferenc@imgtec.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-09-01 01:10:18 +02:00
Alexandre Belloni 697e5a47aa rtc: add generic nvmem support
Many RTCs have an on board non volatile storage. It can be battery backed
RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace
and in-kernel consumers.

This stays compatible with the previous (non documented) ABI that was using
/sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about
the deprecation.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07 13:14:14 +02:00
Linus Walleij 1d61d2592c rtc: gemini/ftrtc010: rename driver and symbols
The Gemini RTC is actually a generic IP block from Faraday
Technology names FTRTC010. Rename the driver file and all
symbols to match this IP name.

The relationship can be clearly seen in the U-Boot driver
posted by Po-Yu Chuang for the Faraday A320 board:
https://lists.denx.de/pipermail/u-boot/2009-September/061326.html

Remove the dependency on ARCH_GEMINI but select the driver
for ARCH_GEMINI so we get a smooth transition. The IP block
is synthsized on different silicon and architectures.

Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06 22:37:15 +02:00
Brian Norris c4f07ecee2 rtc: brcmstb-waketimer: Add Broadcom STB wake-timer
This adds support for the Broadcom STB wake-timer which is a timer in
the chip's 27Mhz clock domain that offers the ability to wake the system
(wake-up source) from suspend states (S2, S3, S5). It is supported using
the rtc framework allowing us to configure alarms for system wake-up.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-05 23:11:59 +02:00
Sebastian Reichel dd3bf50b35 rtc: cpcap: new rtc driver
This driver supports the Motorola CPCAP PMIC found on
some of Motorola's mobile phones, such as the Droid 4.

Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-03-09 01:32:35 +01:00
Amelie Delaunay 4e64350f42 rtc: add STM32 RTC driver
This patch adds support for the STM32 RTC.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-13 01:40:31 +01:00
Akinobu Mita 0b6a8f5c9b rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-12-19 00:59:21 +01:00
Alexandre Belloni e8aa7dcbf0 rtc: isl12057: remove driver
The Intersil isl12057 is now supported by the ds1307 driver.

Acked-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-31 18:21:34 +02:00
Chen-Yu Tsai d00a18a42c rtc: ac100: Add RTC driver for X-Powers AC100
X-Powers AC100 is a codec / RTC combo chip. This driver supports
the RTC sub-device.

The RTC block also has clock outputs and non-volatile storage.
Non-volatile storage wthin the RTC hardware is not supported.
Clock output support is added in the next patch.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-08-08 12:53:36 +01:00
Arnd Bergmann d6faca40f4 rtc: move mc146818 helper functions out-of-line
The mc146818_get_time/mc146818_set_time functions are rather large
inline functions in a global header file and are used in several
drivers and in x86 specific code.

Here we move them into a separate .c file that is compiled whenever
any of the users require it. This also lets us remove the linux/acpi.h
header inclusion from mc146818rtc.h, which in turn avoids some
warnings about duplicate definition of the TRUE/FALSE macros.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-26 01:20:08 +02:00
Venkat Prashanth B U 06776c8921 rtc: add support for Maxim max6916
Add support for Maxim max6916 RTC.

Signed-off-by: Venkat Prashanth B U <venkat.prashanth2498@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-04 16:05:59 +02:00
Akinobu Mita 080481f54e rtc: merge ds3232 and ds3234
According to "Feature Comparison of the DS323x Real-Time Clocks"
(http://pdfserv.maximintegrated.com/en/an/AN5143.pdf), DS3232 and
DS3234 are very similar.

This merges rtc-ds3232 and rtc-ds3234 with using regmap.
This change also enables to support alarm for ds3234.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:35 +01:00
Joshua Henderson 51aa905c91 rtc: pic32: Add PIC32 real time clock driver
This driver adds support for the PIC32 real time clock and calendar
peripheral:
	- reading and setting time
	- alarms provided by dedicated IRQ

Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:21 +01:00
Oleksij Rempel 125e550fd2 rtc: add Alphascale asm9260 driver
Add support for RTC controller found on Alphascale asm9260
SoC.

Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:14 +01:00
Steffen Trumtrar 68298c2dac rtc: add driver for RX6110SA real time clock
The RX6110 comes in two different variants: SPI and I2C.
This driver only supports the SPI variant.

If the need ever arises to also support the I2C variant, this driver
could easily be refactored to support both cases.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-03-14 17:08:10 +01:00
Javier Martinez Canillas cd0e7c1e54 rtc: Remove Maxim 77802 driver
The max77686 RTC driver now supports the max77802 RTC as
well so there's no need to have a separate driver anymore.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-04 23:44:15 +01:00
Akshay Bhat ed13d89b08 rtc: Add Epson RX8010SJ RTC driver
This driver supports the following functions:
 - reading and setting time
 - alarms when connected to an IRQ
 - reading and clearing the voltage low flags

Datasheet:
http://www.epsondevice.com/docs/qd/en/DownloadServlet?id=ID000956
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-01-11 20:19:59 +01:00
Alexandre Belloni 1e3929ef0e rtc: Add a driver for Micro Crystal RV8803
This driver supports the following functions:
 - reading and settings time
 - alarms when connected to an IRQ
 - reading and clearing the voltage low flags
 - nvram

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-11-08 14:12:32 +01:00
Suneel Garapati 11143c19eb rtc: add xilinx zynqmp rtc driver
Add support for RTC controller found on Xilinx Zynq Ultrascale+ MPSoC
platform.

Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 19:37:19 +02:00
Joachim Eastwood c28b42e3ae rtc: add rtc-lpc24xx driver
Add driver for the RTC found on NXP LPC178x/18xx/408x/43xx devices.
The RTC provides calendar and clock functionality together with
alarm interrupt support.

Signed-off-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-09-05 13:19:06 +02:00
Linus Torvalds c13c810063 RTC for 4.2
Core:
  - Coding style and whitespace fixes (interface, Makefile and Kconfig)
  - New rtc_tm_sub() helper
  - New CONFIG_RTC_SYSTOHC_DEVICE option
  - Removed rtc_set_mmss()
 
 New drivers:
  - Mediatek MT6397
  - Cortina Gemini
 
 Drivers:
  - Year 2106 fixes for isl1208, pcf8563 and sunxi
  - update author email for at32ap700x and efi
  - ds1307: alarm fix
  - efi: use correct EFI 'epoch'
  - hym8563: make irq optional
  - imxdi: cleanups and better handling of the security/tamper monitoring
  - snvs: fix wakealarm
  - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563
  - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx,
 hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv, mxc, s3c,
 spear, v3020
  - Kconfig fixes for stmp3xxx and xgene
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJVi7VHAAoJEKbNnwlvZCyzv+YP/1sMAsrusvx3cUEmhJurNk5H
 +vPUdogbr8df9voLkHqTaK1B5+LrL5EXYu+y/6VOwaLIiYv7P9k/eOeZ44fraidc
 H7xnDQ7cOGzE5LpjPg8+o56rh3rGDF1UdZBwbFTgfv4gmZi+GAf+2MEUam+dVVtF
 K9+7Xu77A6EgW+h2uHix8GVtflHdRk/Vxjxl0uOR9BM9O883N5dYYZ7sjenfG65D
 dctAEo+U1xUCw3GCIQ63DvD0joThQk7IB9xJmK/lE5nIv4tbGp5PV8VSNkjKxbFz
 1wa9SR1dhBdjbJ6ZeHh8N5EJ0d5MrssW1blsb7/06MHTu0KYgCndU5EEDOE2pVqD
 GJooYa6RsNqz/KElJ7/0z4T+DJxW7BWaZYRIwv4jpuA4/Y74O5FDw0ULOqxhB8zd
 kVgfWb0feNQikaZio8gOyzIBkw3CBZBu+f6HMJGaeYWSzTNsDLgA8ee7mUawMP31
 ljOxOuPMiTGUbAczK9URo/acZYWNyCOQdm85FxCuwCuPe48m7CyTU6wWBX0Vwj5q
 y3sHH5stcykCesneNj+IJ8v/knqo9d6M43CbCbwBeo0DJskuXF6jjQ9QLBNZP9U0
 7qQa7isL3j3J7T5EouJIBQH2yy4SFiffVOZOPbJ8l+iRUPZUMdOEs2VkQs8BKIZ+
 znu/Ov941h8/HbyI6rcl
 =mugF
 -----END PGP SIGNATURE-----

Merge tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Core:
   - Coding style and whitespace fixes (interface, Makefile and Kconfig)
   - New rtc_tm_sub() helper
   - New CONFIG_RTC_SYSTOHC_DEVICE option
   - Removed rtc_set_mmss()

  New drivers:
   - Mediatek MT6397
   - Cortina Gemini

  Drivers:
   - Year 2106 fixes for isl1208, pcf8563 and sunxi
   - update author email for at32ap700x and efi
   - ds1307: alarm fix
   - efi: use correct EFI 'epoch'
   - hym8563: make irq optional
   - imxdi: cleanups and better handling of the security/tamper monitoring
   - snvs: fix wakealarm
   - Compilation fixes or warning removal for gemini, mt6397, palmas, pfc8563
   - Trivial cleanups for ab8500, ds1216, ds1286, ds1672, ep93xx,
     hid-sensor-time, max6900, max8998, max77686, max77802, mc13xxx, mv,
     mxc, s3c, spear, v3020
   - Kconfig fixes for stmp3xxx and xgene"

* tag 'rtc-v4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits)
  rtc: remove useless I2C dependencies
  rtc: whitespace fixes
  rtc: Properly sort Makefile
  MAINTAINERS: Add RTC subsystem repository
  rtc: pfc8563: fix uninitialized variable warning
  rtc: ds1307: Enable the mcp794xx alarm after programming time
  rtc: hym8563: make the irq optional
  rtc: gemini: fix cocci warnings
  rtc: mv: correct 24 hour error message
  rtc: mv: use BIT()
  rtc: efi: use correct EFI 'epoch'
  rtc: interface: Remove rtc_set_mmss()
  sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC
  rtc: NTP: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization
  rtc: sunxi: Replace deprecated rtc_tm_to_time()
  rtc: isl1208: Replace deprecated rtc_tm_to_time()
  rtc: Introduce rtc_tm_sub() helper function
  rtc: pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()
  rtc: palmas: Initialise bb_charging flag before using it
  rtc: simplify use of devm_ioremap_resource
  ...
2015-06-25 18:55:33 -07:00
Alexandre Belloni 98ab2c938c rtc: whitespace fixes
Some entries in the Kconfig are improperly indented with spaces instead of
tabs.
Also fix whitespaces in Makefile.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-06-25 01:13:47 +02:00