Commit Graph

48 Commits

Author SHA1 Message Date
Lorenzo Pieralisi 7c762036e2 drivers: bus: fix CCI driver kcalloc call parameters swap
This patch fixes a bug/typo in the CCI driver kcalloc usage
that inadvertently swapped the parameters order in the
kcalloc call and went unnoticed.

Reported-by: Xia Feng <xiafeng@allwinnertech.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-31 15:15:13 -08:00
Ezequiel Garcia 9c8eca3ca4 bus: mvebu-mbus: Remove deprecated comment
Remove a comment about the lack of a devicetree binding: this driver's
binding is already implemented and in use.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-24 16:39:41 +00:00
Dan Carpenter 7663cfd3f4 bus: mvebu-mbus: potential forever loop in mvebu_mbus_init()
"of_id->compatible" is an array and not a pointer so it can never be
NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-11-24 13:03:00 +00:00
Linus Torvalds f47671e2d8 Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM updates from Russell King:
 "Included in this series are:

   1. BE8 (modern big endian) changes for ARM from Ben Dooks
   2. big.Little support from Nicolas Pitre and Dave Martin
   3. support for LPAE systems with all system memory above 4GB
   4. Perf updates from Will Deacon
   5. Additional prefetching and other performance improvements from Will.
   6. Neon-optimised AES implementation fro Ard.
   7. A number of smaller fixes scattered around the place.

  There is a rather horrid merge conflict in tools/perf - I was never
  notified of the conflict because it originally occurred between Will's
  tree and other stuff.  Consequently I have a resolution which Will
  forwarded me, which I'll forward on immediately after sending this
  mail.

  The other notable thing is I'm expecting some build breakage in the
  crypto stuff on ARM only with Ard's AES patches.  These were merged
  into a stable git branch which others had already pulled, so there's
  little I can do about this.  The problem is caused because these
  patches have a dependency on some code in the crypto git tree - I
  tried requesting a branch I can pull to resolve these, and all I got
  each time from the crypto people was "we'll revert our patches then"
  which would only make things worse since I still don't have the
  dependent patches.  I've no idea what's going on there or how to
  resolve that, and since I can't split these patches from the rest of
  this pull request, I'm rather stuck with pushing this as-is or
  reverting Ard's patches.

  Since it should "come out in the wash" I've left them in - the only
  build problems they seem to cause at the moment are with randconfigs,
  and since it's a new feature anyway.  However, if by -rc1 the
  dependencies aren't in, I think it'd be best to revert Ard's patches"

I resolved the perf conflict roughly as per the patch sent by Russell,
but there may be some differences.  Any errors are likely mine.  Let's
see how the crypto issues work out..

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits)
  ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h"
  ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg().
  ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h
  ARM: 7871/1: amba: Extend number of IRQS
  ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise()
  ARM: 7872/1: Support arch_irq_work_raise() via self IPIs
  ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode
  ARM: 7878/1: nommu: Implement dummy early_paging_init()
  ARM: 7876/1: clear Thumb-2 IT state on exception handling
  ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}()
  ARM: footbridge: fix build warnings for netwinder
  ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu
  ARM: fix misplaced arch_virt_to_idmap()
  ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown
  ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation
  ARM: 7869/1: remove unused XSCALE_PMU Kconfig param
  ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t
  ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments
  ARM: 7862/1: pcpu: replace __get_cpu_var_uses
  ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code
  ...
2013-11-14 08:51:29 +09:00
Linus Torvalds 53575aa99d ARM: driver updates for 3.13
Updates of SoC-near drivers and other driver updates that makes more sense to
 take through our tree. In this case it's involved:
 
 - Some Davinci driver updates that has required corresponding platform code
   changes (gpio mostly)
 - CCI bindings and a few driver updates
 - Marvell mvebu patches for PCI MSI support (could have gone through the PCI
   tree for this release, but they were acked by Bjorn for 3.12 so we kept them
   through arm-soc).
 - Marvell dove switch-over to DT-based PCIe configuration
 - Misc updates for Samsung platform dmaengine drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgBr3AAoJEIwa5zzehBx3QkEP/i0bm4V+AkNV/EXPxqXDf0Re
 WIKao/0UjqEfTLSx38F+GlsCdpiPkicPZls0tzAiuqWycx+gMiUlJ7XB+tFmQRk1
 RS4KzPQeALFVapjVLtid/Bls9OVI8NcNL1Dx7FISTURzrSzB+kXg7KIsq92SootW
 AHUMZbPQNqZoTYcRo9EFEBCm+7QwH1GmWIo5tID6sRhPIsj0xXrw/zOQDK4WDbkv
 ZmlR2PNdVTYNuKsWtBcINU5GGNcTCEpnLlHZ9QzVOGyP2M/S93FQdjjm+vDxBRC6
 0WsCCFzWc2boSyKrah8xcb7kox7+8HMXUFFAARfOJxvqnMpDCSQnQv0Hb2SiwbkF
 7AW90lj+E9KqleSVy1fjGOvx2MV8vhqFMoCYg2TXW2546JADGnCw2JOILfRcqMox
 JqIpc84Yhmnv2qFCDxdj9hLYqvhH3RjdLzaLhSfMPc8pjP1StMJzcNi7tN46KVqg
 60wU7DvJ0uWfacUGj7VBn88XiZvvJjO/laxj5UcZlS+kQzsysw4Tbriz9UeJK1yl
 N0LBl4iA9xn5aUEI/1kL8xzX+h01VodMCe6jIz3JBdE66vCX6d2Tf+zYpNHiGCsH
 kBfOpuYc1jVW6qTYqDWgO3IVdDdSGa096AF5vR3MOmtDidblq9QVVxxhDwscqO6J
 O0RIcxwZAzQGcO4F50PL
 =yCsK
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM driver updates from Olof Johansson:
 "Updates of SoC-near drivers and other driver updates that makes more
  sense to take through our tree.  In this case it's involved:

   - Some Davinci driver updates that has required corresponding
     platform code changes (gpio mostly)
   - CCI bindings and a few driver updates
   - Marvell mvebu patches for PCI MSI support (could have gone through
     the PCI tree for this release, but they were acked by Bjorn for
     3.12 so we kept them through arm-soc).
   - Marvell dove switch-over to DT-based PCIe configuration
   - Misc updates for Samsung platform dmaengine drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (32 commits)
  ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
  dmaengine: s3c24xx-dma: add support for the s3c2410 type of controller
  ARM: S3C24XX: Fix possible dma selection warning
  PCI: mvebu: make local functions static
  PCI: mvebu: add I/O access wrappers
  PCI: mvebu: Dynamically detect if the PEX link is up to enable hot plug
  ARM: mvebu: fix gated clock documentation
  ARM: dove: remove legacy pcie and clock init
  ARM: dove: switch to DT probed mbus address windows
  ARM: SAMSUNG: set s3c24xx_dma_filter for s3c64xx-spi0 device
  ARM: S3C24XX: add platform-devices for new dma driver for s3c2412 and s3c2443
  dmaengine: add driver for Samsung s3c24xx SoCs
  ARM: S3C24XX: number the dma clocks
  PCI: mvebu: add support for Marvell Dove SoCs
  PCI: mvebu: add support for reset on GPIO
  PCI: mvebu: remove subsys_initcall
  PCI: mvebu: increment nports only for registered ports
  PCI: mvebu: move clock enable before register access
  PCI: mvebu: add support for MSI
  irqchip: armada-370-xp: implement MSI support
  ...
2013-11-11 17:05:37 +09:00
Victor Kamensky fdb07aee0b ARM: cci driver need big endian fixes in asm code
cci_enable_port_for_self written in asm and it works with h/w
registers that are in little endian format. When run in big
endian mode it needs byteswaped constants before/after it
writes/reads to/from such registers

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-10-19 20:46:36 +01:00
Jason Gunthorpe 8553bcad3e bus: mvebu-mbus: Fix optional pcie-mem/io-aperture properties
If the property was not specified then the returned resource had a
resource_size(..) == 1, rather than 0. The PCI-E driver checks for 0 so it
blindly continues on with a corrupted resource.

The regression was introduced into v3.12 by:

  11be654 PCI: mvebu: Adapt to the new device tree layout

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-01 17:04:17 +00:00
Wei Yongjun fee4f2c66a drivers: CCI: fix the error handle in cci_pmu_probe()
This patch fix the error handle of function cci_pmu_probe():
- using IS_ERR() instead of NULL test for the return value of
  devm_ioremap_resource() since it nerver return NULL.
- remove kfree() for devm_kzalloc allocated memory
- remove dev_warn() since devm_ioremap_resource() has error message
  already.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-24 14:03:05 +01:00
Jisheng Zhang 4ec7fc4abb bus: mvebu: add missing of_node_put() to fix reference leak
Add of_node_put to properly decrement the refcount when we are
done using a given node.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Conflicts:
	drivers/bus/mvebu-mbus.c
2013-09-18 16:41:10 +00:00
Punit Agrawal b91c8f284a drivers: CCI: add ARM CCI PMU support
Extend the existing CCI driver to support the PMU by registering a perf
backend for it.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Dave Martin <dave.martin@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
[will: removed broken __init annotations]
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-09-17 12:02:16 +01:00
Linus Torvalds b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Kevin Hilman 8bd6f53af5 This is a patch series that updates imx-weim bus driver to have it
support more i.MX SoCs.  Because there is no maintainer for
 drivers/bus so far, I'm forwarding it through IMX tree for 3.12 merge
 window.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJSDbQLAAoJEFBXWFqHsHzOXroIALgClVwAauhqCX3Yeqsnv5C2
 IW92F/5sM/DGFvkNbSjbZG6dS33PsWvTnGBUDQPjo4QLeASlFeO/ZXfmDgOQCawl
 ZQZLO+mUj2DkbROEtR9hT3+0q5i7Qltc6FiDb322QPeW99LuJB1T6JSZCh9JixOe
 iksGb0LwDm7Ro9u8wB1DtLNL5njqptu/J0ymbpMmauPBlJ4J/3pdniHZSNJklH/i
 tOUfHqaEwtHlL95OYS+43YjIYLRwt/GzLKuN4Ru89/NRE2VcgE6DAweTdBfmufzY
 3wvLE59KYl4/RVw4tvNymILu+qgxrwEIakc/z5FeBlgpxCGJoBI52VHSBwxaCsE=
 =jW6P
 -----END PGP SIGNATURE-----

Merge tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:
This is a patch series that updates imx-weim bus driver to have it
support more i.MX SoCs.  Because there is no maintainer for
drivers/bus so far, I'm forwarding it through IMX tree for 3.12 merge
window.

* tag 'imx-weim-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6:
  drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53
  drivers: bus: imx-weim: Add missing platform_driver.owner field
  drivers: bus: imx-weim: use module_platform_driver_probe()
  drivers: bus: imx-weim: Simplify error path
  drivers: bus: imx-weim: Remove private driver data
2013-08-23 11:37:18 -07:00
Sudeep KarkadaNagesha 78b4d6e0fd drivers/bus: arm-cci: avoid parsing DT for cpu device nodes
Since the CPU device nodes can be retrieved using arch_of_get_cpu_node,
we can use it to avoid parsing the cpus node searching the cpu nodes and
mapping to logical index.

This patch removes parsing DT for cpu nodes by using of_get_cpu_node.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
2013-08-21 10:29:53 +01:00
Alexander Shiyan 3f98b6baad drivers: bus: imx-weim: Add support for i.MX1/21/25/27/31/35/50/51/53
This patch adds WEIM support for all i.MX CPUs supported by the kernel.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 12:59:44 +08:00
Alexander Shiyan fc608c745c drivers: bus: imx-weim: Add missing platform_driver.owner field
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 12:59:44 +08:00
Alexander Shiyan 29e54970c2 drivers: bus: imx-weim: use module_platform_driver_probe()
Driver should be called only once at startup, so code converted
to using module_platform_driver_probe().

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 12:59:43 +08:00
Alexander Shiyan b2d1fb7332 drivers: bus: imx-weim: Simplify error path
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 12:59:43 +08:00
Alexander Shiyan 70ac98da78 drivers: bus: imx-weim: Remove private driver data
Driver uses only probe function so no reason to keep variables
in private driver data.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-08-16 12:59:43 +08:00
Thomas Petazzoni 59cb2fc6f9 bus: mvebu-mbus: Factorize Armada 370/XP data structures
These structures were only different in the mapping tables.
Now that those tables have been removed, it doesn't make any sense
to keep different structures.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:57 +00:00
Thomas Petazzoni 6275afef74 bus: mvebu-mbus: Update main description
After replacing the MBus name-based by the new ID-based API
let's fix the general description of the driver at the beginning
of the file.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:53 +00:00
Thomas Petazzoni ed843a7d62 bus: mvebu-mbus: Remove name -> target, attribute mapping tables
This tables were used together with the name-based MBus window
creation API. Since that's has been removed, we can also remove
the tables.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:49 +00:00
Thomas Petazzoni 124e5427f5 bus: mvebu-mbus: Remove the no longer used name-based API
Now that every user of the deprecated name-based API has been
converted to using the ID-based API, let's remove the former one.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:45 +00:00
Ezequiel Garcia 79d946837c bus: mvebu-mbus: Add new API for the PCIe memory and IO aperture
We add two optional properties to the MBus DT binding, to encode
the PCIe memory and IO aperture. This allows such information to
be retrieved by -for instance- the pci driver to allocate the
MBus decoding windows.

Correspondingly, and in order to retrieve this information,
we add two new APIs.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:34 +00:00
Ezequiel Garcia bb24cab39c bus: mvebu-mbus: Add static window allocation to the DT binding
This patch adds static window allocation to the device tree binding.
Each first-child of the mbus-compatible node, with a suitable 'ranges'
property, declaring an address translation, will trigger an address
decoding window allocation.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:29 +00:00
Ezequiel Garcia 6839cfa82f bus: mvebu-mbus: Introduce device tree binding
This patch adds the most fundamental device-tree initialization.
We only introduce what's required to be able to probe the mvebu-mbus
driver from the DT. Follow-up patches will extend the device tree binding,
allowing to describe static address decoding windows.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:26 +00:00
Ezequiel Garcia 6bd6b3cb82 bus: mvebu-mbus: Factor out initialization details
We introduce a common initialization function mvebu_mbus_common_init()
that will be used by both legacy and device-tree initialization code.
This patch is an intermediate step, which will allow to introduce the
DT binding for this driver in a less intrusive way.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:22 +00:00
Thomas Petazzoni 6a63b098f0 bus: mvebu-mbus: Add new API for window creation
We add an API to create MBus address decoding windows from the target
ID and attribute. This function will be used later and deprecate the
current name based scheme.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:01 +00:00
Linus Torvalds ee1a8d402e ARM SoC device tree changes
These changes from 30 individual branches for the most part update device
 tree files, but there are also a few source code changes that have crept
 in this time, usually in order to atomically move over a driver from
 using hardcoded data to DT probing.
 
 A number of platforms change their DT files to use the C preprocessor,
 which is causing a bit of churn, but that is hopefully only this once.
 
 There are a few conflicts with the other branches unfortunately:
 
 * in exynos5440.dtsi and kirkwood-6281.dtsi, device nodes are added
   from multiple branches. Need to be careful to have the right
   set of closing braces as git gets this one wrong.
 
 * In kirkwood.dtsi, one 'ranges' line got split into two lines, while
   another line got added. Order of the lines does not matter.
 
 * in sama5d3.dtsi, some cleanup was merged the wrong way, causing
   a bogus conflict. We want the 'dmas' and 'dma-names' properties
   to get added here.
 
 * Two lines got removed independently in arch/arm/mach-mxs/mach-mxs.c
 
 * Contents get added independently in arch/arm/mach-omap2/cclock33xx_data.c
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpGCrR//JCVInAQI50RAAsXbH1SGvjKJemXhRkFloPDYpCbgdDUFr
 ChUbjNV1xsY/jaNCfMa5/Qo7lgz/Ot7BpJef9fZn7ret+dc7nchqe/4iIkAokAUh
 E4ao9D1dP5aAA0ihdbSQHCZtR/0SUR81h6BoOVuo/1mvEiBaFbWAeYe8/6LJd9II
 OU1w9bDmjfZWYFUXs+j2VF76ueZQ+kz69XDKZUGtkqN76m1AL8lGDurj5jxvyllF
 VJns8d9q2nr2q9PferfajK6rkOIPaTpwKblxZHUgobCyOitZaiZM0NgF733TsNM6
 HXmhDhkcn7T81+SiHVfigJ/nxo9UgU4zNJCODF3WZIwGIj3FbxvCOpdCYi2NhCO8
 oLcgDk57tpoKpB3gvAmYVQHP9FIepFa/WAWyPIADA7PkpYrwgc4v+cLEHXpd8SRv
 viLLIa5QuNdMeaK+Md9OKmKZFd7uFD9jiMtmdm6IpEVDDjMgoteb2XSoEtNebmtY
 MfbW4okn118a2dFKKaPTKcXVW/a5FRp2JGfB0A58RQHaJWj3JsY1bFn/xWPEpTOA
 IWB/HHMln0LYTL2AXN9HcaL1jnGI1Wq5eWBurX+cXQ/ij1A6jfoRKYglx7AQqOHj
 iWcGYtKLLJCgiWFnLSwcljZhfoYr0/z7rhns6yo7/vhN0riy+M84OgN4HbAmUzc1
 Bgy9PnJTNo8=
 =8PtJ
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree changes from Arnd Bergmann:
 "These changes from 30 individual branches for the most part update
  device tree files, but there are also a few source code changes that
  have crept in this time, usually in order to atomically move over a
  driver from using hardcoded data to DT probing.

  A number of platforms change their DT files to use the C preprocessor,
  which is causing a bit of churn, but that is hopefully only this once"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits)
  ARM: at91: dt: rm9200ek: add spi support
  ARM: at91: dt: rm9200: add spi support
  ARM: at91/DT: at91sam9n12: add SPI DMA client infos
  ARM: at91/DT: sama5d3: add SPI DMA client infos
  ARM: at91/DT: fix SPI compatibility string
  ARM: Kirkwood: Fix the internal register ranges translation
  ARM: dts: bcm281xx: change comment to C89 style
  ARM: mmc: bcm281xx SDHCI driver (dt mods)
  ARM: nomadik: add the new clocks to the device tree
  clk: nomadik: implement the Nomadik clocks properly
  ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency
  ARM: dts: omap4-panda: Fix DVI EDID reads
  ARM: dts: omap4-panda: Add USB Host support
  arm: mvebu: enable mini-PCIe connectors on Armada 370 RD
  ARM: shmobile: irqpin: add a DT property to enable masking on parent
  ARM: dts: AM43x EPOS EVM support
  ARM: dts: OMAP5: Add bandgap DT entry
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk
  ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone
  ...
2013-07-02 14:23:01 -07:00
Linus Torvalds 3883cbb6c1 ARM SoC specific changes
These changes are all to SoC-specific code, a total of 33 branches on
 17 platforms were pulled into this. Like last time, Renesas sh-mobile
 is now the platform with the most changes, followed by OMAP and EXYNOS.
 
 Two new platforms, TI Keystone and Rockchips RK3xxx are added in
 this branch, both containing almost no platform specific code at all,
 since they are using generic subsystem interfaces for clocks, pinctrl,
 interrupts etc. The device drivers are getting merged through the
 respective subsystem maintainer trees.
 
 One more SoC (u300) is now multiplatform capable and several others
 (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
 towards that goal with this series but need more work.
 
 Also noteworthy is the work on PCI here, which is traditionally part of
 the SoC specific code. With the changes done by Thomas Petazzoni, we can
 now more easily have PCI host controller drivers as loadable modules and
 keep them separate from the platform code in drivers/pci/host. This has
 already led to the discovery that three platforms (exynos, spear and imx)
 are actually using an identical PCIe host controller and will be able
 to share a driver once support for spear and imx is added.
 
 Conflicts:
 * asm/glue-proc.h has one CPU type getting added that conflicts
   with another addition in 3.10-rc7
 * Simple context changes in arch/arm/Makefile and arch/arm/Kconfig
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUdLnpmCrR//JCVInAQLoFRAAyatR+MhVFwc91cO7yDw/mz81RO1V9jEd
 QMufoWi0BRfBsubqxnGlb510EEMTz7gxdrlYPILYNr8TqR+lNGhjKt2FQAjN3q2O
 IBvu4x8C+xcxnMNbkCnTQRxP/ziK6yCI6e7enQhwuMuJwvsnJtGbsqKi5ODMw6x0
 o5EQmIdj5NhhSJqJZPCmWsKbx100TH1UwaEnhNl0DSaFj51n3bVRrK6Nxce10GWZ
 HsS1/a63lq/YZLkwfUEvgin/PU9Jx5jMmqhlp3bZjG+f1ItdzJF+9IgS248vCIi2
 ystzWCH88Kh69UFcYFfCjeZe8H45XcP+Zykd8WC0DvF/a7Hwk5KTKE/ciT6RPRxb
 rkWW5EwjqZL9w9cU3rUHWtSVenayQMMEmCfksadr1AExyCrhPqfs9RINyBs2lK5a
 q2bdSFbXZsNzSyL+3yQAfChvRo1/2FdlFVQy+oVUCActV7L77Y7y6jl+b2qzFsSu
 xMKwvC/1vDXTvOnGk6A/qJu7yrHpqJrvw1eI+wnMswNBl7lCTgyyHnr5y8S092jI
 KU4hmSxsYP+y13HmKy4ewPy9DYJYBTSdReKfEFo79Dx8eqySAWjHFL/OPRqhCUYS
 kBq0eZpVZO7tJnHRaRz8n93wIYzb1UOhhgVwxdjPZF9L4d/jzh1BCv0OBWv8IXCu
 uWLAi92lL24=
 =0r9S
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...
2013-07-02 13:43:38 -07:00
Huang Shijie 85bf6d4e4b drivers: bus: add a new driver for WEIM
The WEIM(Wireless External Interface Module) works like a bus.
You can attach many different devices on it, such as NOR, onenand.

In the case of i.MX6q-sabreauto, the NOR is connected to WEIM.

This patch also adds the devicetree binding document.
The driver only works when the devicetree is enabled.

Signed-off-by: Huang Shijie <b32955@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 16:04:28 +08:00
Olof Johansson 19a7ab6124 mvebu cleanup for v3.11 (round 4)
- mvebu
     - use pr_fmt in mvebu-mbus driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQEcBAABAgAGBQJRujNJAAoJEAi3KVZQDZAe8b0H/0/ZEpOt93lu+hmHiVMklT+R
 3kb6s3hT+GCIGOtCcJx5gQbz1Xw+UksiXj62X/wAHDYTl+TvBEaxVj4p7iaCuLDL
 ucdkvdrbg+lMqt+suzlBDIds+rQ4IR1qr5L9YbdFQeD7wv3Bf72GzpjbnzcaObap
 4lqqYf7rlItDAoN0twce1IrXj9FpJRRhQWwrZFNIhLpddKhYgl2akyY+GvAh0BDz
 iDb85KO6nR/kT/jJhJoNdB8SOzrhXFgGX7ezp2zWdAgWC7YFgKJVKHCLF2/yNIjW
 rK5sR9ItAy5+ixNYYyHAoMH2195w0NWPlt/LRu/jEsnQUCE05VTdocIe1gmKb2E=
 =EOJ9
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-3.11-4' of git://git.infradead.org/users/jcooper/linux into next/cleanup

From Jason Cooper, mvebu cleanup for v3.11 (round 4):
 - use pr_fmt in mvebu-mbus driver

* tag 'cleanup-3.11-4' of git://git.infradead.org/users/jcooper/linux:
  bus: mvebu-mbus: Use pr_fmt

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-14 14:57:44 -07:00
Ezequiel Garcia b15d0b5256 bus: mvebu-mbus: Use pr_fmt
In order to clean message printing, we replace pr_info with pr_fmt.
This is purely cosmetic change, with the sole purpose of making
the code a bit more readable.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-08 14:10:19 +00:00
Arnd Bergmann f490249262 drivers/bus: arm-cci: fix combined ARMv6+v7 build
When we build a kernel with support for both ARMv6 and ARMv7,
gas is trying to be helpful by pointing out that the arm-cci
driver would not work on ARMv6:

/tmp/ccu1LDeU.s: Assembler messages:
/tmp/ccu1LDeU.s:450: Error: selected processor does not support ARM mode `wfi '
/tmp/ccu1LDeU.s:451: Error: selected processor does not support ARM mode `wfe '
make[4]: *** [drivers/bus/arm-cci.o] Error 1

We know that the driver will only be used on ARMv7, hence we
can annotate the inline assembly listing to allow those instructions.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Dave Martin <dave.martin@linaro.org>
2013-06-03 15:26:08 +02:00
Tony Lindgren 82c5cde1c4 ARM: OMAP2+: Remove omap4 ocp2scp pdata
This is omap4+ only and no longer needed as omap4+ can be booted
using device tree.

Also remove the related pdata handling from the driver and the
now unneeded platform_data/omap_ocp2scp.h.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-30 13:09:31 -07:00
Nicolas Pitre 62158f817a drivers/bus: arm-cci: function to enable CCI ports from early boot code
This provides cci_enable_port_for_self().  This is the counterpart to
cci_disable_port_by_cpu(self).

This is meant to be called from the MCPM machine specific power_up_setup
callback code when the appropriate affinity level needs to be initialized.
The code therefore has to be position independent as the MMU is still off
and it cannot rely on any stack space.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
2013-05-29 15:50:34 -04:00
Lorenzo Pieralisi ed69bdd8fd drivers: bus: add ARM CCI support
On ARM multi-cluster systems coherency between cores running on
different clusters is managed by the cache-coherent interconnect (CCI).
It allows broadcasting of TLB invalidates and memory barriers and it
guarantees cache coherency at system level through snooping of slave
interfaces connected to it.

This patch enables the basic infrastructure required in Linux to handle and
programme the CCI component.

Non-local variables used by the CCI management functions called by power
down function calls after disabling the cache must be flushed out to main
memory in advance, otherwise incoherency of those values may occur if they
are sitting in the cache of some other CPU when power down functions
execute. Driver code ensures that relevant data structures are flushed
from inner and outer caches after the driver probe is completed.

CCI slave port resources are linked to set of CPUs through bus masters
phandle properties that link the interface resources to masters node in
the device tree.

Documentation describing the CCI DT bindings is provided with the patch.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2013-05-29 15:50:34 -04:00
Thomas Petazzoni 8d7297b48d bus: mvebu: fix mistake in PCIe window target attribute for Kirkwood
The target and attributes for the PCIe address decoding windows were
not correct on Kirkwood for the second PCIe interface.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-11 17:05:37 +00:00
Neil Greatorex fe0cd96c00 bus: mvebu-mbus: Restore checking for coherency fabric hardware
The new mvebu-mbus driver was not checking the device tree for
coherency fabric hardware and hence was not setting the hw_io_coherency
flag in mbus_state. This prevented the mvsdio driver from operating
correctly. This patch restores the check.

Signed-off-by: Neil Greatorex <neil@fatboyfat.co.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-30 21:11:40 +00:00
Thomas Petazzoni fddddb52a6 bus: introduce an Marvell EBU MBus driver
The Marvell EBU SoCs have a configurable physical address space
layout: the physical ranges of memory used to address PCI(e)
interfaces, NOR flashes, SRAM and various other types of memory are
configurable by software, through a mechanism of so-called 'address
decoding windows'.

This new driver mvebu-mbus consolidates the existing code to address
the configuration of these memory ranges, which is spread into
mach-mvebu, mach-orion5x, mach-mv78xx0, mach-dove and mach-kirkwood.

Following patches convert each Marvell EBU SoC family to use this
driver, therefore removing the old code that was configuring the
address decoding windows.

It is worth mentioning that the MVEBU_MBUS Kconfig option is
intentionally added as a blind option. The new driver implements and
exports the mv_mbus_dram_info() function, which is used by various
Marvell drivers throughout the tree to get access to window
configuration parameters that they require. This function is also
implemented in arch/arm/plat-orion/addr-map.c, which ultimately gets
removed at the end of this patch series. So, in order to preserve
bisectability, we want to ensure that *either* this new driver, *or*
the legacy code in plat-orion/addr-map.c gets compiled in.

By making MVEBU_MBUS a blind option, we are sure that only a platform
that does 'select MVEBU_MBUS' will get this new driver compiled
in. Therefore, throughout the next patches that convert the Marvell
sub-architectures one after the other to this new driver, we add the
'select MVEBU_MBUS' and also ensure to remove plat-orion/addr-map.c
from the build for this specific sub-architecture. This ensures that
bisectability is preserved.

Ealier versions of this driver had a DT binding, but since those were
not yet agreed upon, they were removed. The driver still uses
of_device_id to find the SoC specific details according to the string
passed to mvebu_mbus_init(). The plan is to re-introduce a proper DT
binding as a followup set of patches.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28 19:04:16 +00:00
Greg Kroah-Hartman 0fe763c570 Drivers: misc: remove __dev* attributes.
CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03 15:57:16 -08:00
Tony Lindgren 770b6cb4d2 ARM: OMAP: Fix drivers to depend on omap for internal devices
These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-16 15:23:37 -08:00
Kishon Vijay Abraham I 0133370f93 drivers: bus: ocp2scp: add pdata support
ocp2scp was not having pdata support which makes *musb* fail for non-dt
boot in OMAP platform. The pdata will have information about the devices
that is connected to ocp2scp. ocp2scp driver will now make use of this
information to create the devices that is attached to ocp2scp.

This is needed to fix MUSB regression caused by commit c9e4412a
(arm: omap: phy: remove unused functions from omap-phy-internal.c)

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
[tony@atomide.com: updated comments for regression info]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-07 09:35:53 -08:00
Olof Johansson 974a847e00 drivers: bus: omap_l3: fixup merge conflict resolution
This fixes a local merge conflict resolution done wrong locally in
arm-soc for-next. soc.h was added on a cleanup branch, but the driver
was moved and the header no longer needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
[ .. and I did the same wrong merge, since git automatically does the
  whole rename detection etc, so applying this patch from Olof  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-01 19:39:48 -07:00
Linus Torvalds 8f446a7a06 ARM: soc: driver specific changes
- A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr
 nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW
 inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P
 LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh
 u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2
 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1
 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL
 zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad
 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk
 rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3
 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS
 HP4M96LxLHJlLGCxhEme
 =ck7M
 -----END PGP SIGNATURE-----

Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM soc driver specific changes from Olof Johansson:
 - A long-coming conversion of various platforms to a common LED
   infrastructure
 - AT91 is moved over to use the newer MCI driver for MMC
 - Pincontrol conversions for samsung platforms
 - DT bindings for gscaler on samsung
 - i2c driver fixes for tegra, acked by i2c maintainer

Fix up conflicts as per Olof.

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: bus: omap_l3: use resources instead of hardcoded irqs
  pinctrl: exynos: Fix wakeup IRQ domain registration check
  pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data
  pinctrl: exynos: Correct the detection of wakeup-eint node
  pinctrl: exynos: Mark exynos_irq_demux_eint as inline
  pinctrl: exynos: Handle only unmasked wakeup interrupts
  pinctrl: exynos: Fix typos in gpio/wkup _irq_mask
  pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa
  drivers: bus: Move the OMAP interconnect driver to drivers/bus/
  i2c: tegra: dynamically control fast clk
  i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20
  ARM: tegra: clock: remove unused clock entry for i2c
  ARM: tegra: clock: add connection name in i2c clock entry
  i2c: tegra: pass proper name for getting clock
  ARM: tegra: clock: add i2c fast clock entry in clock table
  ARM: EXYNOS: Adds G-Scaler device from Device Tree
  ARM: EXYNOS: Add clock support for G-Scaler
  ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform
  ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC
  ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
  ...
2012-10-01 18:46:13 -07:00
Olof Johansson 2c2d16745a drivers: bus: omap_l3: use resources instead of hardcoded irqs
This fixes up a merge conflict due to the move of the driver and cleanups of
platform data around the same time. Moving to the resource is what we want
anyway, so do it in this branch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: rewrote with this branch as base, same end result]
Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-09-20 16:12:36 -07:00
Santosh Shilimkar 0ee7261c92 drivers: bus: Move the OMAP interconnect driver to drivers/bus/
OMAP interconnect drivers are used for the interconnect error handling.
Since they are bus driver, lets move it to newly created drivers/bus.

Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-19 16:53:26 +02:00
Kishon Vijay Abraham I 46ca681153 drivers: bus: omap-ocp2scp: Fix compile error
Fixes:
CC [M]  drivers/bus/omap-ocp2scp.o
drivers/bus/omap-ocp2scp.c:70:1: error: '__mod_of_device_table' aliased to
undefined symbol 'omap_usb2_id_table'

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-04 17:02:09 -07:00
Kishon Vijay Abraham I 26a84b3eae drivers: bus: add a new driver for omap-ocp2scp
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
USB2PHY is connected to ocp2scp.

This also includes device tree support for ocp2scp driver and
the documentation with device tree binding information is updated.

Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-22 14:31:49 +02:00