* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: Add new ext4 inode tracepoints
ext4: Don't call sb_issue_discard() in ext4_free_blocks()
ext4: do not try to grab the s_umount semaphore in ext4_quota_off
ext4: fix potential race when freeing ext4_io_page structures
ext4: handle writeback of inodes which are being freed
ext4: initialize the percpu counters before replaying the journal
ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
ext4: fix lazyinit hang after removing request
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
TTY: move .gitignore from drivers/char/ to drivers/tty/vt/
TTY: create drivers/tty/vt and move the vt code there
TTY: create drivers/tty and move the tty core files there
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6:
Staging: ath6kl: remove empty files that mess with 'distclean'
staging: ath6kl: Fixing the driver to use modified mmc_host structure
Staging: solo6x10: fix build problem
* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
sh: clkfwk: Fix up checkpatch warnings.
sh: make some needlessly global sh7724 clocks static
sh: add clk_round_parent() to optimize parent clock rate
sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
sh: nommu: Support building without an uncached mapping.
sh: nommu: use 32-bit phys mode.
sh: mach-se: Fix up SE7206 no ioport build.
sh: intc: Update for single IRQ reservation helper.
sh: clkfwk: Fix up rate rounding error handling.
sh: mach-se: Rip out superfluous 7751 PIO routines.
sh: mach-se: Rip out superfluous 770x PIO routines.
sh: mach-edosk7705: Kill off machtype, consolidate board def.
sh: mach-edosk7705: update for this century, kill off PIO trapping.
sh: mach-se: Rip out superfluous 7206 PIO routines.
sh: mach-systemh: Kill off dead board.
sh: mach-snapgear: Kill off machtype, consolidate board def.
sh: mach-snapgear: Rip out superfluous PIO routines.
sh: mach-microdev: SuperIO-relative ioport mapping.
Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode. Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.
For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:
BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b
https://bugzilla.kernel.org/show_bug.cgi?id=22302
Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com
It's not needed to sync the filesystem, and it fixes a lock_dep complaint.
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename). In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed. If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.
To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed. That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).
Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.
kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
Call Trace:
[<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
[<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
[<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
[<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
[<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
[<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
[<ffffffff81087910>] do_writepages+0x1c/0x25
[<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
[<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
[<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
[<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
[<ffffffff810c14a3>] evict+0x22/0x92
[<ffffffff810c1a3d>] iput+0x212/0x249
[<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
[<ffffffff810bdf6b>] d_kill+0x3d/0x5d
[<ffffffff810be613>] dput+0x13a/0x147
[<ffffffff810b990d>] sys_renameat+0x1b5/0x258
[<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
[<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
[<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
[<ffffffff810b99c6>] sys_rename+0x16/0x18
[<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b
Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
These clocks are currently only used inside one .c file and are not
declared in any headers, therefore having them global is useless.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Sometimes it is possible and reasonable to adjust the parent clock rate to
improve precision of the child clock, e.g., if the child clock has no siblings.
clk_round_parent() is a new addition to the SH clock-framework API, that
implements such an optimization for child clocks with divisors, taking all
integer values in a range.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
These two .h files would get removed from the tree when doing
make distclean
It turns out they are not needed at all, so just delete them which fixes
people's git trees when doing development.
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While scanning the floopy code due to c093ee4f07 ("floppy: fix
use-after-free in module load failure path"), I found one more instance
of trying to access disk->queue pointer after doing put_disk() on
gendisk. For some reason , floppy moule still loads/unloads fine. The
object is probably still around with right pointer values.
o There seems to be one more instance of trying to cleanup the request
queue after we have called put_disk() on associated gendisk.
o This fix is more out of code inspection. Even without this fix for
some reason I am able to load/unload floppy module without any
issues.
o Floppy module loads/unloads fine after the fix.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to
be ignored by git, so move the .gitignore file that was doing it to the
properly location now that the files have moved as well.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 27ae60f8f7 ("ipw2x00: replace "ieee80211" with "libipw" where
appropriate") changed DRV_NAME to be "libipw", but didn't properly fix
up the places where it was used to specify the name for the /proc/net/
directory.
For backwards compatibility reasons, that directory name remained
"ieee80211", but due to the DRV_NAME change, the error case printouts
and the cleanup functions now used "libipw" instead. Which made it all
fail badly.
For example, on module unload as reported by Randy:
WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e()
name 'libipw'
because it's trying to unregister a /proc directory that obviously
doesn't even exist.
Clean it all up to use DRV_PROCNAME for the actual /proc directory name.
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: PPC: BookE: Load the lower half of MSR
KVM: PPC: BookE: fix sleep with interrupts disabled
KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit().
PPC: KVM: Book E doesn't have __end_interrupts.
KVM: x86: Issue smp_call_function_many with preemption disabled
KVM: x86: fix information leak to userland
KVM: PPC: fix information leak to userland
KVM: MMU: fix rmap_remove on non present sptes
KVM: Write protect memory after slot swap
Commit 488211844e ("floppy: switch to one queue per drive instead of
sharing a queue") introduced a use-after-free. We do "put_disk()" on
the disk device _before_ we then clean up the queue associated with that
disk.
Move the put_disk() down to avoid dereferencing a free'd data structure.
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d9ca07a05c ("watchdog: Avoid kernel crash when disabling
watchdog") introduces a section mismatch.
Now that we reference no_watchdog from non-__init code it can no longer
be __initdata.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits)
inet_diag: Make sure we actually run the same bytecode we audited.
netlink: Make nlmsg_find_attr take a const nlmsghdr*.
fib: fib_result_assign() should not change fib refcounts
netfilter: ip6_tables: fix information leak to userspace
cls_cgroup: Fix crash on module unload
memory corruption in X.25 facilities parsing
net dst: fix percpu_counter list corruption and poison overwritten
rds: Remove kfreed tcp conn from list
rds: Lost locking in loop connection freeing
de2104x: fix panic on load
atl1 : fix panic on load
netxen: remove unused firmware exports
caif: Remove noisy printout when disconnecting caif socket
caif: SPI-driver bugfix - incorrect padding.
caif: Bugfix for socket priority, bindtodev and dbg channel.
smsc911x: Set Ethernet EEPROM size to supported device's size
ipv4: netfilter: ip_tables: fix information leak to userland
ipv4: netfilter: arp_tables: fix information leak to userland
cxgb4vf: remove call to stop TX queues at load time.
cxgb4: remove call to stop TX queues at load time.
...
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: ohci: fix race when reading count in AR descriptor
firewire: ohci: avoid reallocation of AR buffers
firewire: ohci: fix race in AR split packet handling
firewire: ohci: fix buffer overflow in AR split packet handling
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer
cifs: dereferencing first then checking
cifs: trivial comment fix: tlink_tree is now a rbtree
[CIFS] Cleanup unused variable build warning
cifs: convert tlink_tree to a rbtree
cifs: store pointer to master tlink in superblock (try #2)
cifs: trivial doc fix: note setlease implemented
CIFS: Add cifs_set_oplock_level
FS: cifs, remove unneeded NULL tests
posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.
But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.
This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.
It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.
Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.
In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the callers already have a pointer to struct cifsInodeInfo. Use it.
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
arch/tile: mark "hardwall" device as non-seekable
asm-generic/stat.h: support 64-bit file time_t for stat()
arch/tile: don't allow user code to set the PL via ptrace or signal return
arch/tile: correct double syscall restart for nested signals
arch/tile: avoid __must_check warning on one strict_strtol check
arch/tile: bomb raw_local_irq_ to arch_local_irq_
arch/tile: complete migration to new kmap_atomic scheme
Add MODULE_LICENSE() that matches file comments so that kernel
is not tainted.
leds_net5501: module license 'unspecified' taints kernel.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was preventing the guest from setting any bits in the
hardware MSR which aren't forced on, such as MSR[SPE].
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
It is not legal to call mutex_lock() with interrupts disabled.
This will assert with debug checks enabled.
If there's a real need to disable interrupts here, it could be done
after the mutex is acquired -- but I don't see why it's needed at all.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
The VCPU uninit calls some TLB functions, and the TLB uninit function
frees the memory used by them.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Fix an unresolved symbol with CONFIG_KVM_GUEST plus CONFIG_RELOCATABLE on
Book E.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
smp_call_function_many is specified to be called only with preemption
disabled. Fulfill this requirement.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized. It leads to leaking of contents of kernel stack
memory. We have to initialize them to zero.
In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct. It makes sense as these
fields are explicitly marked as padding. No more fields need zeroing.
KVM-Stable-Tag.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Structure kvm_ppc_pvinfo is copied to userland with flags and
pad fields unitialized. It leads to leaking of contents of
kernel stack memory.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
drop_spte should not attempt to rmap_remove a non present shadow pte.
This fixes a BUG_ON seen on kvm-autotest.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
I have observed the following bug trigger:
1. userspace calls GET_DIRTY_LOG
2. kvm_mmu_slot_remove_write_access is called and makes a page ro
3. page fault happens and makes the page writeable
fault is logged in the bitmap appropriately
4. kvm_vm_ioctl_get_dirty_log swaps slot pointers
a lot of time passes
5. guest writes into the page
6. userspace calls GET_DIRTY_LOG
At point (5), bitmap is clean and page is writeable,
thus, guest modification of memory is not logged
and GET_DIRTY_LOG returns an empty bitmap.
The rule is that all pages are either dirty in the current bitmap,
or write-protected, which is violated here.
It seems that just moving kvm_mmu_slot_remove_write_access down
to after the slot pointer swap should fix this bug.
KVM-Stable-Tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We can optimize kernel/relay.c::relay_alloc_page_array() slightly by
using vzalloc. The patch makes these changes:
- use vzalloc instead of vmalloc+memset.
- remove redundant local variable 'array'.
- declare local 'pa_size' as const.
Cuts down nicely on both source and object-code size.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vt and other related code is moved into the drivers/tty/vt directory.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The tty code should be in its own subdirectory and not in the char
driver with all of the cruft that is currently there.
Based on work done by Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k, m68knommu: Do not include linux/hardirq.h in asm/irqflags.h
m68knommu: add back in declaration of do_IRQ
This patch is based on Dan's original patch. His original description is
below:
Smatch complained about a couple checking for NULL after dereferencing
bugs. I'm not super familiar with the code so I did the conservative
thing and move the dereferences after the checks.
The dereferences in cifs_lock() and cifs_fsync() were added in
ba00ba64cf "cifs: make various routines use the cifsFileInfo->tcon
pointer". The dereference in find_writable_file() was added in
6508d904e6 "cifs: have find_readable/writable_file filter by fsuid".
The comments there say it's possible to trigger the NULL dereference
under stress.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Noticed while reviewing (late) the rbtree conversion patchset (which has been merged
already).
Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>
We were using nlmsg_find_attr() to look up the bytecode by attribute when
auditing, but then just using the first attribute when actually running
bytecode. So, if we received a message with two attribute elements, where only
the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different
bytecode strings.
Fix this by consistently using nlmsg_find_attr everywhere.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will let us use it on a nlmsghdr stored inside a netlink_callback.
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit ebc0ffae5 (RCU conversion of fib_lookup()),
fib_result_assign() should not change fib refcounts anymore.
Thanks to Michael who did the bisection and bug report.
Reported-by: Michael Ellerman <michael@ellerman.id.au>
Tested-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds
Theodore Ts'o
Dmitry Monakhov
Paul Mundt
Guennadi Liakhovetski
Greg Kroah-Hartman
Vivek Goyal
David Daney
Oleg Nesterov
Pavel Shilovsky
Jean Delvare
Guenter Roeck
Randy Dunlap
Scott Wood
Jan Kiszka
Vasiliy Kulikov
Marcelo Tosatti
Michael S. Tsirkin
Jesper Juhl
Jeff Layton
Suresh Jayaraman
Nelson Elhage
Eric Dumazet