Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found
in Xilinx' ML403 reference design.
Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in
kernel/irq/resend.c (line 70). According to Linus
(http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't
had a look into this 'problem' yet.
Signed-off-by: Joachim Foerster <JOFT@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added support for the dmics and enabled EAPD for several laptops with
STAC9228 cards.
Signed-off-by: Matthew Ranostay <mranostay@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list.
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds support for 88.2k, 96k, and 128k samplerates
on cmi8738-55 chip.
Analog playback works fine on all channels.
Analog capture works well too, though the extra samples seems
interpolated by hardware.
spdif playback and capture works fine.
Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Some small improvements on autocfg stuff:
- sort HP pins by sequence number, too
- move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC
- ditto for line-in pin
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch improves support for 'SB Live 24-bit Extarnal' USB card.
1) This card can go into muted state when a headphones connected or
disconnected. So notify mixer about changes in headphone jack.
2) Add LED controls and procfs support just as in similar Audigy 2 NX card.
3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality:
the card may adjust microphone input level only.
Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Remove sequencer instrument layer from the tree.
This mechanism hasn't been used much with the actual devices. The only
reasonable user was OPL3 loader, and now it was rewritten to use hwdep
instead. So, let's remove the rest of rotten codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the exclusive access lock in hwdep instead of the own one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Use the hwdep device for loading OPL2/3 patch data instead of the
messy sequencer instrument layer.
Due to this change, the sbiload program should be updated, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch supresses an annoying compiler warning that the variable
err may be used uninitialised.
Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch kills these two compilation warnings if
power management is disabled:
sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status'
declared 'static' but never defined
sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958'
declared 'static' but never defined
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Introduced the global 'slots' option to snd module. This option provides
an alternative way to handle the order of multiple sound card instances.
It's an easier approach to avoid conflict with hotplug devices, and can
be used together with the existing 'order' option of each card driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Show the current EAPD status and volume-knob status in proc file.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds ac97 support for ln2440sbc board from LittleChips.
This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec.
Existing s3c2443 implementation is slightly modified because s3c2440
and s3c2443 have different AC97 interrupts.
Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch adds full record and playback support for the Samsung Q1
Ultra - Vista model (different codec than the earlier Q1 Ultra models).
Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs
HP_ONLY ac97 quirk.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Fixed the print format for debug message.
Spotted by Matthew Wilcox.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This patch brings some English style improvements throughout the
document, as well as 1 or 2 extra technical details.
Signed-off-by: Michael Opdenacker <michael@free-electrons.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added the support for Onkyo SE-90PCI and SE-200PCI boards.
Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
The following patch adds 'Mono Playback Switch' control to WM9712 codec
SoC driver.
Also, it fixes Treble, Bass and Mono playback volume inversion bits.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Changed the dmux for STAC9228 from ADC1MUX to ADC0MUX to avoid confusion.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added a dmux to the STAC9228 cards with DMIC support. And added a
STAC_DIGITAL_INPUT_SOURCE macro for repeating mixer code.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added the missing STAC9228 DMIC support.
Also added a new vendor id tag for IDT.
Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Added the missing model string 'eeepc-p701' for ALC662 codec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits)
[POWERPC] Cell IOMMU fixed mapping support
[POWERPC] Split out the ioid fetching/checking logic
[POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows
[POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()
[POWERPC] Split cell_iommu_setup_hardware() into two parts
[POWERPC] Split out the logic that allocates struct iommus
[POWERPC] Allocate the hash table under 1G on cell
[POWERPC] Add set_dma_ops() to match get_dma_ops()
[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.
[POWERPC] 85xx: Only invalidate TLB0 and TLB1
[POWERPC] 83xx: Fix typo in mpc837x compatible entries
[POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall
[POWERPC] 83xx: rework platform Kconfig
[POWERPC] 85xx: rework platform Kconfig
[POWERPC] 86xx: Remove unused IRQ defines
[POWERPC] QE: Explicitly set address-cells and size cells for muram
[POWERPC] Convert StorCenter DTS file to /dts-v1/ format.
[POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.
[PPC] Remove 85xx from arch/ppc
[PPC] Remove 83xx from arch/ppc
...
This patch adds support for setting up a fixed IOMMU mapping on certain
cell machines. For 64-bit devices this avoids the performance overhead of
mapping and unmapping pages at runtime. 32-bit devices are unable to use
the fixed mapping.
The fixed mapping is established at boot, and maps all of physical memory
1:1 into device space at some offset. On machines with < 30 GB of memory
we setup the fixed mapping immediately above the normal IOMMU window.
For example a machine with 4GB of memory would end up with the normal
IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In
this case a 64-bit device wishing to DMA to 1GB would be told to DMA to
3GB, plus any offset required by firmware. The firmware offset is encoded
in the "dma-ranges" property.
On machines with 30GB or more of memory, we are unable to place the fixed
mapping above the normal IOMMU window as we would run out of address space.
Instead we move the normal IOMMU window to coincide with the hash page
table, this region does not need to be part of the fixed mapping as no
device should ever be DMA'ing to it. We then setup the fixed mapping
from 0 to 32GB.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Split out the ioid fetching and checking logic so we can use it elsewhere
in a subsequent patch.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add support to cell_iommu_setup_page_tables() for handling two windows,
the dynamic window and the fixed window. A fixed window size of 0
indicates that there is no fixed window at all.
Currently there are no callers who pass a non-zero fixed window, but the
upcoming fixed IOMMU mapping patch will change that.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Split the IOMMU logic out from cell_dma_dev_setup() into a separate
function. If we're not using dma_direct_ops or dma_iommu_ops we don't
know what the hell's going on, so BUG.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Split cell_iommu_setup_hardware() into two parts. Split the page table
setup into cell_iommu_setup_page_tables() and the bits that kick the
hardware into cell_iommu_enable_hardware().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Split out the logic that allocates a struct iommu into a separate
function. This can fail however the calling code has never cared - so
just return if we can't allocate an iommu.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
In order to support the fixed IOMMU mapping (in a subsequent patch),
we need the hash table to be inside the IOMMUs DMA window. This is
usually 2G, but let's make sure the hash table is under 1G as that
will satisfy the IOMMU requirements and also means the hash table will
be on node 0.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
alpha: fix x86.git merge build error
ia64: on UP percpu variables are not small memory model
x86: fix arch/x86/kernel/test_nx.c modular build bug
s390: use generic percpu linux-2.6.git
POWERPC: use generic per cpu
ia64: use generic percpu
SPARC64: use generic percpu
percpu: change Kconfig to HAVE_SETUP_PER_CPU_AREA
modules: fold percpu_modcopy into module.c
x86: export copy_from_user_ll_nocache[_nozero]
x86: fix duplicated TIF on 64-bit
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (26 commits)
firewire: fw-sbp2: Use sbp2 device-provided mgt orb timeout for logins
firewire: fw-sbp2: increase login orb reply timeout, fix "failed to login"
firewire: replace subtraction with bitwise and
firewire: fw-core: react on bus resets while the config ROM is being fetched
firewire: enforce access order between generation and node ID, fix "giving up on config rom"
firewire: fw-cdev: use device generation, not card generation
firewire: fw-sbp2: use device generation, not card generation
firewire: fw-sbp2: try to increase reconnect_hold (speed up reconnection)
firewire: fw-sbp2: skip unnecessary logout
firewire vs. ieee1394: clarify MAINTAINERS
firewire: fw-ohci: Dynamically allocate buffers for DMA descriptors
firewire: fw-ohci: CycleTooLong interrupt management
firewire: Fix extraction of source node id
firewire: fw-ohci: Bug fixes for packet-per-buffer support
firewire: fw-ohci: Fix for dualbuffer three-or-more buffers
firewire: fw-sbp2: remove unused misleading macro
firewire: fw-sbp2: prepare for s/g chaining
firewire: fw-sbp2: refactor workq and kref handling
ieee1394: ohci1394: don't schedule IT tasklets on IR events
ieee1394: sbp2: raise default transfer size limit
...
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (27 commits)
lguest: use __PAGE_KERNEL instead of _PAGE_KERNEL
lguest: Use explicit includes rateher than indirect
lguest: get rid of lg variable assignments
lguest: change gpte_addr header
lguest: move changed bitmap to lg_cpu
lguest: move last_pages to lg_cpu
lguest: change last_guest to last_cpu
lguest: change spte_addr header
lguest: per-vcpu lguest pgdir management
lguest: make pending notifications per-vcpu
lguest: makes special fields be per-vcpu
lguest: per-vcpu lguest task management
lguest: replace lguest_arch with lg_cpu_arch.
lguest: make registers per-vcpu
lguest: make emulate_insn receive a vcpu struct.
lguest: map_switcher_in_guest() per-vcpu
lguest: per-vcpu interrupt processing.
lguest: per-vcpu lguest timers
lguest: make hypercalls use the vcpu struct
lguest: make write() operation smp aware
...
Manual conflict resolved (maybe even correctly, who knows) in
drivers/lguest/x86/core.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
security: compile capabilities by default
selinux: make selinux_set_mnt_opts() static
SELinux: Add warning messages on network denial due to error
SELinux: Add network ingress and egress control permission checks
NetLabel: Add auditing to the static labeling mechanism
NetLabel: Introduce static network labels for unlabeled connections
SELinux: Allow NetLabel to directly cache SIDs
SELinux: Enable dynamic enable/disable of the network access checks
SELinux: Better integration between peer labeling subsystems
SELinux: Add a new peer class and permissions to the Flask definitions
SELinux: Add a capabilities bitmap to SELinux policy version 22
SELinux: Add a network node caching mechanism similar to the sel_netif_*() functions
SELinux: Only store the network interface's ifindex
SELinux: Convert the netif code to use ifindex values
NetLabel: Add IP address family information to the netlbl_skbuff_getattr() function
NetLabel: Add secid token support to the NetLabel secattr struct
NetLabel: Consolidate the LSM domain mapping/hashing locks
NetLabel: Cleanup the LSM domain hash functions
NetLabel: Remove unneeded RCU read locks
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
PPC: Fix powerpc vio_find_name to not use devices_subsys
Driver core: add bus_find_device_by_name function
Module: check to see if we have a built in module with the same name
x86: fix runtime error in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
Driver core: Fix up build when CONFIG_BLOCK=N
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: (21 commits)
dlm: static initialization improvements
dlm: clean ups
dlm: Sanity check namelen before copying it
dlm: keep cached master rsbs during recovery
dlm: change error message to debug
dlm: fix possible use-after-free
dlm: limit dir lookup loop
dlm: reject normal unlock when lock is waiting for lookup
dlm: validate messages before processing
dlm: reject messages from non-members
dlm: another call to confirm_master in receive_request_reply
dlm: recover locks waiting for overlap replies
dlm: clear ast_type when removing from astqueue
dlm: use fixed errno values in messages
dlm: swap bytes for rcom lock reply
dlm: align midcomms message buffer
dlm: close othercons
dlm: use dlm prefix on alloc and free functions
dlm: don't print common non-errors
dlm: proper prototypes
...
Fix docbook fatal error:
docproc: linux-2.6.24-git8/block/ll_rw_blk.c: No such file or directory
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
a5a19c63f4 removed the include of
asm/pgalloc.h from asm-generic/tlb.h. That works fine on most
architectures, but broke ALPHA.
Fixup ALPHA by adding the include to asm-alpha/tlbflush.h
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tony says:
| The CONFIG_SMP=n path in ia64 makes quite radical changes ... rather
| than putting all the per-cpu stuff into the top 64K of address space
| and providing a per-cpu TLB mapping for that range to a different
| physical address ... it just makes all the per-cpu stuff link as ordinary
| variables in .data.
the new generic percpu code got confused about this as PER_CPU_ATTRIBUTES
was defined even on UP, so it picked up that small memory model - which
was not possible to get linked. The right fix is to only define that
on SMP. This resolved the build failures in my cross-compiling environment.
also link these variables into the .percpu section even on UP - some
assembly code has offset dependencies. (such as GET_IA64_MCA_DATA() in
arch/ia64/kernel/mca_asm.S)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Tony Luck <tony.luck@intel.com>
Joachim Foerster
Matthew Ranostay
Tobin Davis
Timofei Bondarenko
Takashi Iwai
Krzysztof Helt
Ivan Kuten
Michael Opdenacker
Shin-ya Okada
Mike Rapoport
Matthew Ranostay
Linus Torvalds
Michael Ellerman
Paul Mackerras
Randy Dunlap
Thomas Gleixner
Ingo Molnar