Commit Graph

5565 Commits

Author SHA1 Message Date
Shiraz Saleem 8e0e7aedad i40iw: Enable remote access rights for stag allocation
Fix to enable remote access rights when allocating stag.

Fixes: b7aee855d3 ("RDMA/i40iw: Add base memory management extensions")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12 10:46:34 -04:00
Nicolas Iooss b0548cff99 i40iw: do not print unitialized variables in error message
i40iw_create_cqp() printed the contents of variables maj_err and min_err
in an error message before they could be initialized (by calling
dev->cqp_ops->cqp_create).

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12 10:46:34 -04:00
Christoph Lameter c5a81d11d7 IB core: Add port_xmit_wait counter
Add the missing port_xmit_wait counter. This counter is displayed through
some tools like perfquery but is not available via sysfs.

For the PORT_PMA_ATTR macro the _counter field is set to zero
allowing us to specify the offset directly like with PORT_PMA_ATTR_EXT

See also the earlier work in 2008 by Vladimir Skolovsky

https://www.mail-archive.com/general@lists.openfabrics.org/msg20313.html

Signed-off-by: Vladimir Sokolvsky <vlad@mellanox.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12 10:46:24 -04:00
Tadeusz Struk 98f179a5ea IB/hfi1: Fix sleep inside atomic issue in init_asic_data
The critical section should protect only the list traversal
and dd->asic_data modification, not the memory allocation.
The fix pulls the allocation out of the critical section.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12 10:46:24 -04:00
Mike Marciniszyn 896ce45da2 IB/hfi1: Correct issues with sc5 computation
There are several computatations of the sc in the
ud receive routine.

Besides the code duplication, all are wrong when the
sc is greater than 15.   In that case the code incorrectly
or's a 1 into the computed sc instead of 1 shifted left
by 4.

Fix precomputed sc5 by using an already implemented routine
hdr2sc() and deleting flawed duplicated code.

Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-07-12 10:46:24 -04:00
Doug Ledford 9903fd1374 Merge branches '4.7-rc-misc', 'hfi1-fixes', 'i40iw-rc-fixes' and 'mellanox-rc-fixes' into k.o/for-4.7-rc 2016-06-23 12:22:33 -04:00
Bart Van Assche c0cf4512a3 IB/srpt: Reduce QP buffer size
The memory needed for the send and receive queues associated with
a QP is proportional to the max_sge parameter. The current value
of that parameter is such that with an mlx4 HCA the QP buffer size
is 8 MB. Since DMA is used for communication between HCA and CPU
that buffer either has to be allocated coherently or map_single()
must succeed for that buffer. Since large contiguous allocations
are fragile and since the maximum segment size for e.g. swiotlb
is 256 KB, reduce the max_sge parameter. This patch avoids that
the following text appears on the console after SRP logout and
relogin on a system equipped with multiple IB HCAs:

mlx4_core 0000:05:00.0: swiotlb buffer is full (sz: 8388608 bytes)
swiotlb: coherent allocation failed for device 0000:05:00.0 size=8388608
CPU: 11 PID: 148 Comm: kworker/11:1 Not tainted 4.7.0-rc4-dbg+ #1
Call Trace:
 [<ffffffff812c6d35>] dump_stack+0x67/0x92
 [<ffffffff812efe71>] swiotlb_alloc_coherent+0x141/0x150
 [<ffffffff810458be>] x86_swiotlb_alloc_coherent+0x3e/0x50
 [<ffffffffa03861fa>] mlx4_buf_direct_alloc.isra.5+0x9a/0x120 [mlx4_core]
 [<ffffffffa0386545>] mlx4_buf_alloc+0x165/0x1a0 [mlx4_core]
 [<ffffffffa035053d>] create_qp_common.isra.29+0x57d/0xff0 [mlx4_ib]
 [<ffffffffa03510da>] mlx4_ib_create_qp+0x12a/0x3f0 [mlx4_ib]
 [<ffffffffa031154a>] ib_create_qp+0x3a/0x250 [ib_core]
 [<ffffffffa055dd4b>] srpt_cm_handler+0x4bb/0xcad [ib_srpt]
 [<ffffffffa02c1ab0>] cm_process_work+0x20/0xf0 [ib_cm]
 [<ffffffffa02c3640>] cm_work_handler+0x1ac0/0x2059 [ib_cm]
 [<ffffffff810737ed>] process_one_work+0x19d/0x490
 [<ffffffff81073b29>] worker_thread+0x49/0x490
 [<ffffffff8107a0ea>] kthread+0xea/0x100
 [<ffffffff815b25af>] ret_from_fork+0x1f/0x40

Fixes: b99f8e4d7b ("IB/srpt: convert to the generic RDMA READ/WRITE API")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 12:04:09 -04:00
Shiraz Saleem 7748e4990d i40iw: Enable level-1 PBL for fast memory registration
Set the chunk_size to enable level-1 PBL support when the fast memory
page count is more than one.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:35:34 -04:00
Faisal Latif 0477e18145 i40iw: Return correct max_fast_reg_page_list_len
Return correct value for max_fast_reg_page_list_len from
i40iw_query_device().

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:35:34 -04:00
Faisal Latif ee23abd75c i40iw: Correct status check on i40iw_get_pble
i40iw_get_pble returns 0 on success. Correct the check on return
code.

Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:35:34 -04:00
Shiraz Saleem 747f1c6d9b i40iw: Correct CQ arming
CQ is armed for solicited events only, ignoring other notification
flags. Correct this by arming for next and arming for solicited
event if IB_CQ_SOLICITED is set. Also protect CQ shadow area update
with spinlock.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:35:34 -04:00
Mike Marciniszyn c755f4afa6 IB/rdmavt: Correct qp_priv_alloc() return value test
The current drivers return errors from this calldown
wrapped in an ERR_PTR().

The rdmavt code incorrectly tests for NULL.

The code is fixed to use IS_ERR() and change ret according
to the driver return value.

Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:16:15 -04:00
Ashutosh Dixit 8ae84f7c56 IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp
Since rvt_reset_qp already zero's out qp->s_ack_queue head and tail
pointers, there is no need to zero out qp->s_ack_queue itself.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:16:15 -04:00
Mike Marciniszyn 2aee309d3e IB/hfi1: Fix deadlock with txreq allocation slow path
A failure in the get_txreq() inline will result in a
slow path retry using __get_txreq().

__get_txreq() attempts to procure the qp s_lock, which
is already held in all callers.

Fix by deleting the s_lock maintenance in __get_txreq()
and add sparse syntax hooks to future proof the code.

Cc: Stable <stable@vger.kernel.org> # 4.6+
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:16:15 -04:00
Chuck Lever cbc9355a93 IB/mlx4: Prevent cross page boundary allocation
Prevent cross page boundary allocation by allocating
new page, this is required to be aligned with ConnectX-3 HW
requirements.

Not doing that might cause to "RDMA read local protection" error.

Fixes: 1b2cd0fc67 ('IB/mlx4: Support the new memory registration API')
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:08:25 -04:00
Dotan Barak 5b420d9cf7 IB/mlx4: Fix memory leak if QP creation failed
When RC, UC, or RAW QPs are created, a qp object is allocated (kzalloc).
If at a later point (in procedure create_qp_common) the qp creation fails,
this qp object must be freed.

Fixes: 1ffeb2eb8b ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:08:25 -04:00
Yishai Hadas 5533c18ab0 IB/mlx4: Verify port number in flow steering create flow
In procedure mlx4_ib_create_flow, passing an invalid port number
will cause an out-of-bounds array access. Data passed to this procedure
can come from user-space.  Therefore, need to validate port number
before proceeding onwards.

Note that we check against the number of physical ports declared at
the verbs (ib core) level; When bonding is active, the verbs level
sees one physical port, even though the low-level driver sees two ports.

Fixes: f77c0162a3 ("IB/mlx4: Add receive flow steering support")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:07:04 -04:00
Yishai Hadas a6100603a4 IB/mlx4: Fix error flow when sending mads under SRIOV
Fix mad send error flow to prevent double freeing address handles,
and leaking tx_ring entries when SRIOV is active.

If ib_mad_post_send fails, the address handle pointer in the tx_ring entry
must be set to NULL (or there will be a double-free) and tx_tail must be
incremented (or there will be a leak of tx_ring entries).
The tx_ring is handled the same way in the send-completion handler.

Fixes: 37bfc7c1e8 ("IB/mlx4: SR-IOV multiplex and demultiplex MADs")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:07:03 -04:00
Yishai Hadas f2940e2c76 IB/mlx4: Fix the SQ size of an RC QP
When calculating the required size of an RC QP send queue, leave
enough space for masked atomic operations, which require more space than
"regular" atomic operation.

Fixes: 6fa8f71984 ("IB/mlx4: Add support for masked atomic operations")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@mellanox.co.il>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:06:54 -04:00
Talat Batheesh 00bf534fce IB/mlx5: Fix wrong naming of port_rcv_data counter
port_xmit_data is written instead of port_rcv_data.

Fixes: 3efd9a1121 ('IB/mlx5: Modify MAD reading counters method to use counter registers')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Eli Cohen c9b254955b IB/mlx5: Fix post send fence logic
If the caller specified IB_SEND_FENCE in the send flags of the work
request and no previous work request stated that the successive one
should be fenced, the work request would be executed without a fence.
This could result in RDMA read or atomic operations failure due to a MR
being invalidated. Fix this by adding the mlx5 enumeration for fencing
RDMA/atomic operations and fix the logic to apply this.

Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Maor Gottlieb b57141c1ab IB/uverbs: Initialize ib_qp_init_attr with zeros
Initialize ib_qp_init_attr with zeros in order to avoid from garbage
in fields that won't be set with user values.

Fixes: a060b5629a ('IB/core: generic RDMA READ/WRITE API')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Eli Cohen b3556005c5 IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID
When virtualziation is supported, VFs may send SA MADs to a GID formed
by the concatenation of the subnet prefix with the
IB_SA_WELL_KNOWN_GUID. When a response is required, the current code
will search the local HCA's port for the received GID to figure out the
GID index of the entry containing this GID. However, since this is not a
real GID it will not be found and error will be printed.

We change the logic to check if the destination GID is this special GID
and avoid lookup in this case and use GID index 0.

Fixes: a0c1b2a350 ('IB/core: Support accessing SA in virtualized environment')
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Alex Vesker c65f6c5a36 IB/core: Fix RoCE v1 multicast join logic issue
During multicast join of RoCEv1, IGMP join state and max hop limit
were updated incorrectly. IGMP join should be sent and marked as
joined only on RoCEv2 after a successful join. Max hops should be
updated to the hop limit on RoCEv2 regardless of the join state.

Fixes: bee3c3c918 ('IB/cma: Join and leave multicast groups...')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Talat Batheesh f336ae0314 IB/core: Fix no default GIDs when netdevice reregisters
Currently, when the netdevice returned by get_netdev is unregistered,
we delete all GIDs (including the default GIDs) and reset their
attributes. Therefore, when we re-register it, no default GIDs
will be assigned (as their "default GID") attribute will be reset.
Fixing this by keeping "default GID" attribute.

Fixes: 03db3a2d81 ('IB/core: Add RoCE GID table management')
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-23 10:03:57 -04:00
Sebastian Sanchez 34d351f8dd IB/hfi1: Send a pkey change event on driver pkey update
Swapping a cable from a "Mgmt Allowed=No" switch port to a
"Mgmt Allowed=Yes" switch port doesn't send a pkey change
notification. Therefore, the link doesn't become active as
the oib_utils layer uses an old pkey table cache.

Fix by ensuring the pkey change notification is sent when
the table is changed both explicitly by the FM and implicitly
by the driver via a cable swap.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:27 -04:00
Sebastian Sanchez 3ec5fa28c9 IB/hfi1: Remove FULL_MGMT_P_KEY from pkey table at link up
FULL_MGMT_P_KEY doesn't get cleared from the pkey table at link bounce
because the link down and link bounce code paths are different when
moving a QSFP cable on a switch. This causes an HFI unit connected to a
switch to try to be initialized to an FM node when the QSFP cable is
moved from a MgmtAllowed=NO port to a MgmtAllowed=YES port and back to a
MgmtAllowed=NO port. Remove FULL_MGMT_P_KEY from pkey table at link up.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:27 -04:00
Tadeusz Struk c078f0dd01 IB/hfi1: Fix potential buffer overflow
This fixes potential buffer overflow because the sprintf function
doesn't check buffer boundaries. Use snprintf instead.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:27 -04:00
Tadeusz Struk 93dd0a0978 IB/hfi1: Fix potential NULL ptr dereference
This fixes potential NULL ptr dereference because IS_ERR(dd) doesn't
handle NULL. Fix the issue by initializing the pointer with a not NULL
error code.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:27 -04:00
Ira Weiny 5e9ef24619 IB/qib: Prevent context loss
If a context has already been assigned to an FD, prevent
another assignment.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Ira Weiny ca2f30a0a6 IB/hfi1: Prevent context loss
If a context has already been assigned to an FD, prevent
another assignment.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Jubin John c3c64a951c IB/hfi1: Increase packet egress timeout
The current value of 500us for the packet egress timeout is too small
which causes the host to declare failure on draining packets too early
and unnecessarily bounces the link. Increase this to 50ms taking into
account the switch packet discard timer default and the worst case
per-VL package drainage rate.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Brian Welty 501edc4244 IB/rdmavt: Correct warning during QPN allocation
Correct calculation of the low order bits which should be unset
based on use of qos_shift parameter when assigning QPN.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Brian Welty 96605672a4 IB/rdmavt: Correct required callback functions for MODIFY_QP
Functions required for MODIFY_PORT were incorrectly being
required for MODIFY_QP.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Jubin John b4ba6633ea IB/hfi1: Fix credit return threshold adjustment
The credit return threshold adjustment on mtu change algorithm does not
take into account all the kernel send contexts that are assigned per VL.
Use the pio send context map to adjust the credit return thresholds for
all the allocated and assigned kernel send contexts based on the MTU
adjustment per VL.

The pio send context map can be changed dynamically based on the actual
number of operational vls which is set by the fabric manager. When this
happens update the credit return threshold values for all the remapped
kernel send contexts.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:11:26 -04:00
Bart Van Assche 37e07cdafc IB/cma: Make the code easier to verify
Static source code analysis tools like smatch cannot handle functions
that lock or not lock a mutex depending on the value of the arguments.
Hence inline the function cma_disable_callback(). Additionally, this
patch realizes a small performance optimization by reducing the number of
mutex_lock() and mutex_unlock() calls in the modified functions. With
this patch applied smatch no longer complains about source file cma.c.
Without this patch smatch reports the following for this source file:

drivers/infiniband/core/cma.c:1959: cma_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'.
  Locked on:   line 1880
               line 1959
  Unlocked on: line 1941
drivers/infiniband/core/cma.c:2112: iw_conn_req_handler() warn: inconsistent returns 'mutex:&listen_id->handler_mutex'.
  Locked on:   line 2048
  Unlocked on: line 2112

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 20:03:42 -04:00
Jason Gunthorpe 8c5122e45a IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHs
When this code was reworked for IBoE support the order of assignments
for the sl_tclass_flowlabel got flipped around resulting in
TClass & FlowLabel being permanently set to 0 in the packet headers.

This breaks IB routers that rely on these headers, but only affects
kernel users - libmlx4 does this properly for user space.

Cc: stable@vger.kernel.org
Fixes: fa417f7b52 ("IB/mlx4: Add support for IBoE")
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-17 19:36:54 -04:00
Erez Shitrit 61c78eea95 IB/IPoIB: Don't update neigh validity for unresolved entries
ipoib_neigh_get unconditionally updates the "alive" variable member on
any packet send.  This prevents the neighbor garbage collection from
cleaning out a dead neighbor entry if we are still queueing packets
for it.  If the queue for this neighbor is full, then don't update the
alive timestamp.  That way the neighbor can time out even if packets
are still being queued as long as none of them are being sent.

Fixes: b63b70d877 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:49:48 -04:00
Achiad Shochat f879ee8d90 IB/mlx5: Fix alternate path code
Userspace flag IBV_QP_ALT_PATH is supposed to set the alternate path
including fields alt_pkey_index and alt_timeout.
Added IB_QP_PKEY_INDEX and IB_QP_TIMEOUT to the attribute mask when
calling mlx5_set_path for the alternate path to force setting the
alt_pkey_index and alt_timeout values.

Fixes: bf24481a3a7c4 ('IB/mlx5: Consider alternate path in pkey ...')
Signed-off-by: Achiad Shochat <achiad@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:50 -04:00
Noa Osherovich d3ae2bdeba IB/mlx5: Fix pkey_index length in the QP path record
Pkey index fields in the QP context path record are extended to 16
bits, as required by IB spec (version 1.3).
This change affects all QP commands which include path records.

To enable this change, moved the free adaptive routing flag bit
(free_ar) to the most significant byte of the QP path record.

Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB ...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:50 -04:00
Noa Osherovich 3c4c37746c IB/mlx5: Fix entries check in mlx5_ib_resize_cq
Verify that number of entries is less than device capability.
Add an appropriate warning message for error flow.

Fixes: bde51583f4 ('IB/mlx5: Add support for resize CQ')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:50 -04:00
Noa Osherovich 9ea5785286 IB/mlx5: Fix entries checks in mlx5_ib_create_cq
Number of entries shouldn't be greater than the device's max
capability. This should be checked before rounding the entries number
to power of two.

Fixes: 51ee86a4af ('IB/mlx5: Fix check of number of entries...')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:50 -04:00
Noa Osherovich 2cc6ad5f21 IB/mlx5: Check BlueFlame HCA support
BlueFlame support is reported only for PFs when the HCA capability is
on.

Fixes: 938fe83c8d ('net/mlx5_core: New device capabilities...')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:50 -04:00
Noa Osherovich 0540d8148d IB/mlx5: Fix returned values of query QP
Some variables were not initialized properly: max_recv_wr,
max_recv_sge, max_send_wr, qp_context and max_inline_data.

Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:49 -04:00
Noa Osherovich bc5c6eed05 IB/mlx5: Limit query HCA clock
When PAGE_SIZE is larger than 4K, the user shouldn't be able to query
the HCA core clock. This counter is within 4KB boundary and the
user-space shall not read information that's after this boundary.

Fixes: b368d7cb8c ('IB/mlx5: Add hca_core_clock_offset to...')
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:49 -04:00
Eran Ben Elisha c0fcebf552 IB/mlx5: Fix FW version diaplay in sysfs
Add a 4-digit padding to show FW version in proper format.

Fixes: 9603b61de1 ('mlx5: Move pci device handling from...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:49 -04:00
Noa Osherovich 2788cf3bd9 IB/mlx5: Return PORT_ERR in Active to Initializing tranisition
FW port-change events are fired on Active <-> non Active port state
transitions only.
When the port state changes from Active to Initializing (Active ->
Down -> Initializing), a single event is fired.
The HCA transitions from Down to Initializing unless prevented from
doing so, hence the driver should also propagate events when the port
state is Initializing to consumers so they'll be aware that the port
is no longer Active and act accordingly.

Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB...')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:49 -04:00
Maor Gottlieb da6d6ba3c6 IB/mlx5: Set flow steering capability bit
Flow steering is supported by mlx5 device when the following
features are supported by firmware:

1. NIC RX flow table.
2. Device has enough flow steering levels.
3. Atomic modification of flow table entry.
4. Flow tables chaining.

To check if flow steering is supported it's enough to check
if the driver opened the mlx5 bypass namespace.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 10:03:49 -04:00
Mark Bloch 8aec013afe IB/core: Initialize sysfs attributes before sysfs create group
For dynamically allocated sysfs attributes there is a need to call
sysfs_attr_init in order to comply with lockdep, not calling it
will result in error complaining key is not in .data section.

Fixes: b40f4757da ("IB/core: Make device counter infrastructure dynamic")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 09:50:54 -04:00
Mark Bloch 9b29953bf8 IB/IPoIB: Disable bottom half when dealing with device address
Align locking usage when touching device address with rest
of the kernel. Lock the bottom half when doing so using
netif_addr_lock_bh.

This also solves the following case as reported by lockdep:
	CPU0                    CPU1
	----                    ----
lock(_xmit_INFINIBAND);
				local_irq_disable();
				lock(&(&mc->mca_lock)->rlock);
				lock(_xmit_INFINIBAND);
<Interrupt>
lock(&(&mc->mca_lock)->rlock);

*** DEADLOCK ***

Fixes: 492a7e67ff ("IB/IPoIB: Allow setting the device address")
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-06-07 09:50:54 -04:00