Commit Graph

282 Commits

Author SHA1 Message Date
Linus Torvalds db06f826ec The new and exciting feature this time around is in the clk core.
We've added duty cycle support to the clk API so that clk signal
 duty cycle ratios can be adjusted while taking into account things
 like clk dividers and clk tree hierarchy. So far only one SoC has
 implemented support for this, but I expect there will be more to
 come in the future.
 
 Outside of the core, we have the usual pile of clk driver updates
 and additions. The Amlogic meson driver got the most lines in the
 diffstat this time around because it added support for a whole bunch
 of hardware and duty cycle configuration. After that the Rockchip PX30,
 Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the diff.
 We're left with the collection of non-critical fixes after that. Overall
 it looks pretty quiet this time.
 
 Core:
  - Clk duty cycle support
  - Proper CLK_SET_RATE_GATE support throughout the tree
 
 New Drivers:
  - Actions Semi Owl series S700 SoC clk driver
  - Qualcomm SDM845 display clock controller
  - i.MX6SX ocram_s clk support
  - Uniphier NAND, USB3 PHY, and SPI clk support
  - Qualcomm RPMh clk driver
  - i.MX7D mailbox clk support
  - Maxim 9485 Programmable Clock Generator
  - Expose 32 kHz PLL on PXA SoCs
  - imx6sll GPIO clk gate support
  - Atmel at91 I2S audio clk support
  - SI544/SI514 clk on/off support
  - i.MX6UL GPIO clock gates in CCM CCGR
  - Renesas Crypto Engine clocks on R-Car H3
  - Renesas clk support for the new RZ/N1D SoC
  - Allwinner A64 display engine clock support
  - Support for Rockchip's PX30 SoC
  - Amlogic Meson axg PCIe and audio clocks
  - Amlogic Meson GEN CLK on gxbb, gxl and axg
 
 Updates:
  - Remove an unused variable from Exynos4412 ISP driver
  - Fix a thinko bug in SCMI clk division logic
  - Add missing of_node_put()s in some i.MX clk drivers
  - Tegra SDMMC clk jitter improvements with high speed signaling modes
  - SPDX tagging for qcom and cs2000-cp drivers
  - Stop leaking con ids in __clk_put()
  - Fix a corner case in fixed factor clk probing where node is in DT but
    parent clk is registered much later
  - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value
  - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
  - Convert to CLK_IS_CRITICAL for i.MX51/53 driver
  - Fix Tegra BPMP driver oops when xlating a NULL clk
  - Proper default configuration for vic03 and vde clks on Tegra124
  - Mark Tegra memory controller clks as critical
  - Fix array bounds clamp in Tegra's emc determine_rate() op
  - Ingenic i2s bit update and allow UDC clk to gate
  - Fix name of aspeed SDC clk define to have only one 'CLK'
  - Fix i.MX6QDL video clk parent
  - Critical clk markings for qcom SDM845
  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  - Mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it supplying
    the pwm used to drive the logic supply of the rk3399 core.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlt0WD0RHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSX5jBAAlMLb0fqnuAGNJeXZDk5rsCa496LMyGWx
 ku7uLA2H68SlbSQqq8FUPoCjDZkmsu2CbOX1U2/H4HFDS0pqpPiV3mZNtSeacedp
 4Wf8yUB5G3xdq9QUCSX5LxMmEQoGeJ+gaTspBvM6sNvEMBR2kEMGBqUy768tnDTR
 qCQ8Q1jOU6l8IdFV0SZGssmZ+oFqOyQoJVquPWPkw1+p/2f1KyYIyG5J5FXGxgcR
 1XQITY/I/dShQ2wd+ZeDdt+GjZqIXQ06Pt3ruRG7HVP79Zt1XCRJd5dZ2lf+Wj8T
 1ul3TWCAMYZ8gCPebLMbBGzKvQJQJcDU6DpIZsrUDN+C6z7KCS9vqeCxP9cF+3jJ
 LOmA6cWE7z9Vkk9s0I0KJJ2Sw7wRoXzE5OJcwa/yousSz3s9cX+F8SAkdZs77oUF
 0XnzPsvwdHI/egQ4UrsStPHM/gOFhsQqo8vvm5xaaTR2AxLKBHuPa9oUv9YpO/P5
 J6FCst3qeY3Wp69fJ5/Z058OFOAt81dKXij2fZJBOO4KJy7Kse8Sz5ApybXVAbY5
 lfvx+KGMITFqLYrcRIQZmlCuoHcMwI0FtHr9Ens5GXdbrJ+W+FlvP43eLCA0ZmRx
 9DidemChj3k3PC3H6tbax/jzV4IIxZdyUoBJ1imL4uyhhaXp/qr45A/aGwNp8Q8a
 WvkIGm3epK4=
 =Mcn+
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The new and exciting feature this time around is in the clk core.
  We've added duty cycle support to the clk API so that clk signal duty
  cycle ratios can be adjusted while taking into account things like clk
  dividers and clk tree hierarchy. So far only one SoC has implemented
  support for this, but I expect there will be more to come in the
  future.

  Outside of the core, we have the usual pile of clk driver updates and
  additions. The Amlogic meson driver got the most lines in the diffstat
  this time around because it added support for a whole bunch of
  hardware and duty cycle configuration. After that the Rockchip PX30,
  Qualcomm SDM845, and Renesas SoC drivers fill in a majority of the
  diff. We're left with the collection of non-critical fixes after that.
  Overall it looks pretty quiet this time.

  Core:
   - Clk duty cycle support
   - Proper CLK_SET_RATE_GATE support throughout the tree

  New Drivers:
   - Actions Semi Owl series S700 SoC clk driver
   - Qualcomm SDM845 display clock controller
   - i.MX6SX ocram_s clk support
   - Uniphier NAND, USB3 PHY, and SPI clk support
   - Qualcomm RPMh clk driver
   - i.MX7D mailbox clk support
   - Maxim 9485 Programmable Clock Generator
   - expose 32 kHz PLL on PXA SoCs
   - imx6sll GPIO clk gate support
   - Atmel at91 I2S audio clk support
   - SI544/SI514 clk on/off support
   - i.MX6UL GPIO clock gates in CCM CCGR
   - Renesas Crypto Engine clocks on R-Car H3
   - Renesas clk support for the new RZ/N1D SoC
   - Allwinner A64 display engine clock support
   - support for Rockchip's PX30 SoC
   - Amlogic Meson axg PCIe and audio clocks
   - Amlogic Meson GEN CLK on gxbb, gxl and axg

  Updates:
   - remove an unused variable from Exynos4412 ISP driver
   - fix a thinko bug in SCMI clk division logic
   - add missing of_node_put()s in some i.MX clk drivers
   - Tegra SDMMC clk jitter improvements with high speed signaling modes
   - SPDX tagging for qcom and cs2000-cp drivers
   - stop leaking con ids in __clk_put()
   - fix a corner case in fixed factor clk probing where node is in DT
     but parent clk is registered much later
   - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return
     value
   - i.MX clk init arrays removed in place of CLK_IS_CRITICAL
   - convert to CLK_IS_CRITICAL for i.MX51/53 driver
   - fix Tegra BPMP driver oops when xlating a NULL clk
   - proper default configuration for vic03 and vde clks on Tegra124
   - mark Tegra memory controller clks as critical
   - fix array bounds clamp in Tegra's emc determine_rate() op
   - Ingenic i2s bit update and allow UDC clk to gate
   - fix name of aspeed SDC clk define to have only one 'CLK'
   - fix i.MX6QDL video clk parent
   - critical clk markings for qcom SDM845
   - fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
   - mark Rockchip's pclk_rkpwm_pmu as critical clock, due to it
     supplying the pwm used to drive the logic supply of the rk3399
     core"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (85 commits)
  clk: rockchip: Add pclk_rkpwm_pmu to PMU critical clocks in rk3399
  clk: cs2000-cp: convert to SPDX identifiers
  clk: scmi: Fix the rounding of clock rate
  clk: qcom: Add display clock controller driver for SDM845
  clk: mvebu: armada-37xx-periph: Remove unused var num_parents
  clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable
  clk: actions: Add S700 SoC clock support
  dt-bindings: clock: Add S700 support for Actions Semi Soc's
  clk: actions: Add missing REGMAP_MMIO dependency
  clk: uniphier: add clock frequency support for SPI
  clk: uniphier: add more USB3 PHY clocks
  clk: uniphier: add NAND 200MHz clock
  clk: tegra: make sdmmc2 and sdmmc4 as sdmmc clocks
  clk: tegra: Add sdmmc mux divider clock
  clk: tegra: Refactor fractional divider calculation
  clk: tegra: Fix includes required by fence_udelay()
  clk: imx6sll: fix missing of_node_put()
  clk: imx6ul: fix missing of_node_put()
  clk: imx: add ocram_s clock for i.mx6sx
  clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
  ...
2018-08-15 21:41:21 -07:00
Stephen Boyd ac7da1b787 Merge branches 'clk-actions-s700', 'clk-exynos-unused', 'clk-qcom-dispcc-845', 'clk-scmi-round' and 'clk-cs2000-spdx' into clk-next
* clk-actions-s700:
  :  - Actions Semi Owl series S700 SoC clk driver
  clk: actions: Add S700 SoC clock support
  dt-bindings: clock: Add S700 support for Actions Semi Soc's
  clk: actions: Add missing REGMAP_MMIO dependency

* clk-exynos-unused:
  :  - Remove an unused variable from Exynos4412 ISP driver
  clk: samsung: Remove unused mout_user_aclk400_mcuisp_p4x12 variable

* clk-qcom-dispcc-845:
  :  - Qualcomm SDM845 display clock controller
  clk: qcom: Add display clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Display clock bindings
  clk: qcom: Move frequency table macro to common file

* clk-scmi-round:
  :  - Fix a thinko bug in SCMI clk division logic
  clk: scmi: Fix the rounding of clock rate

* clk-cs2000-spdx:
  clk: cs2000-cp: convert to SPDX identifiers
2018-08-14 23:00:15 -07:00
Stephen Boyd 4a18ef5bab Merge branches 'clk-qcom-rpmh', 'clk-qcom-spdx', 'clk-con-id-leak', 'clk-fixed-factor-populated' and 'clk-mvebu-periph-parent' into clk-next
* clk-qcom-rpmh:
  :  - Qualcomm RPMh clk driver
  clk: qcom: clk-rpmh: Add QCOM RPMh clock driver

* clk-qcom-spdx:
  :  - SPDX tagging for qcom
  clk: qcom: Update SPDX headers for common files

* clk-con-id-leak:
  :  - Stop leaking con ids in __clk_put()
  clk: core: Potentially free connection id

* clk-fixed-factor-populated:
  :  - Fix a corner case in fixed factor clk probing where node is in DT but
  :    parent clk is registered much later
  clk: clk-fixed-factor: Clear OF_POPULATED flag in case of failure

* clk-mvebu-periph-parent:
  :  - Marvell Armada 3700 clk_pm_cpu_get_parent() had an invalid return value
  clk: mvebu: armada-37xx-periph: Remove unused var num_parents
  clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent
2018-08-14 22:58:49 -07:00
Stephen Boyd b183c6887a Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next
* clk-imx6-video-parent:
  :  - Fix i.MX6QDL video clk parent
  clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL

* clk-qcom-sdm845-criticals:
  :  - critical clk markings for qcom SDM845
  clk: qcom: Enable clocks which needs to be always on for SDM845

* clk-renesas:
  clk: renesas: Renesas R9A06G032 clock driver
  dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation
  dt-bindings: clock: Add the r9a06g032-sysctrl.h file
  clk: renesas: r8a7795: Add CCREE clock
  clk: renesas: r8a7795: Add CR clock

* clk-stratix10-fixes:
  :  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  clk: socfpga: stratix10: fix the sdmmc_free_clk mux
  clk: socfpga: stratix10: fix the parents of mpu_free_clk

* clk-atmel-i2s:
  :  - Atmel at91 I2S audio clk support
  clk: at91: add I2S clock mux driver
  dt-bindings: clk: at91: add an I2S mux clock
2018-08-14 22:58:35 -07:00
Taniya Das 81351776c9 clk: qcom: Add display clock controller driver for SDM845
Add support for the display clock controller found on SDM845
based devices. This would allow display drivers to probe and
control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
[sboyd@kernel.org: Remove CLK_GET_RATE_NOCACHE everywhere]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-08-01 08:08:12 -07:00
Taniya Das f9419783a6 clk: qcom: Update SPDX headers for common files
SPDX headers updated for common/branch/pll/regmap files.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-25 09:23:33 -07:00
Taniya Das 9c7e47025a clk: qcom: clk-rpmh: Add QCOM RPMh clock driver
Add the RPMh clock driver to control the RPMh managed clock resources on
some of the Qualcomm Technologies, Inc. SoCs.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
[sboyd@kernel.org: Clean up whitespace, indentation, remove
cmd_db_ready check]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-16 10:25:04 -07:00
Taniya Das da172d2b6b clk: qcom: Move frequency table macro to common file
Frequency table macro is used by multiple clock drivers, move frequency
table macro to common header file.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 16:45:51 -07:00
Vivek Gautam 53f3abe97b clk/mmcc-msm8996: Make mmagic_bimc_gdsc ALWAYS_ON
Patch (7705bb7176 clk: qcom: mmcc-msm8996: leave all mmagic gdscs
and clocks always enabled") makes all mmgaic gdscs ALWAYS_ON.
The mmagic_bimc_gdsc is also needed to be turned on to get display
working on 8x96.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 7705bb7176 ("clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 11:24:17 -07:00
Vinod Koul 5f75b78d3d clk: qcom: gcc-msm8996: Disable halt check on UFS tx clock
Commit 12d807cd34 ("clk: qcom: gcc-msm8996: Disable halt check on UFS
clocks") marked BRANCH_HALT_SKIP for ufs rx clocks, but missed ufs tx
clocks. The result of that is kernel warnings at reboot:

[  105.624283] gcc_ufs_tx_symbol_0_clk status stuck at 'on'
[  105.624311] WARNING: CPU: 1 PID: 1 at drivers/clk/qcom/clk-branch.c:100 clk_branch_toggle+0x190/0x1b0
[  105.633235] Modules linked in:
[  105.645118] CPU: 1 PID: 1 Comm: systemd-shutdow Tainted: G        W         4.18.0-rc2-00002-g2bfbe52a53a3 #11
[  105.647988] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
[  105.657966] pstate: 60000085 (nZCv daIf -PAN -UAO)
[  105.664127] pc : clk_branch_toggle+0x190/0x1b0
[  105.668900] lr : clk_branch_toggle+0x190/0x1b0
[  105.673324] sp : ffff00000805bb40
[  105.677751] x29: ffff00000805bb40 x28: 0000000000000000
[  105.681140] x27: ffff8000d947cc60 x26: 0000000000000001
[  105.686520] x25: ffff000008f71900 x24: 0000000000000000
[  105.691816] x23: ffff00000925e338 x22: ffff00000855f8e0
[  105.697114] x21: 0000000000000000 x20: 0000000000000000
[  105.702407] x19: ffff0000091c9000 x18: ffffffffffffffff
[  105.707702] x17: 0000ffffac148c58 x16: ffff000008b82928
[  105.712998] x15: ffff0000091c96c8 x14: ffff0000893817c7
[  105.718293] x13: ffff0000093817d5 x12: ffff0000091c9940
[  105.723587] x11: ffff0000085e3e70 x10: ffff00000805b780
[  105.728884] x9 : ffff00000805bb40 x8 : 7320737574617473
[  105.734179] x7 : 206b6c635f305f6c x6 : 00000000000001e5
[  105.739472] x5 : 0000000000000000 x4 : 0000000000000000
[  105.744769] x3 : ffffffffffffffff x2 : ffff0000091e2658
[  105.750063] x1 : a7c4712dd5e09c00 x0 : 0000000000000000
[  105.755360] Call trace:
[  105.760652]  clk_branch_toggle+0x190/0x1b0
[  105.762824]  clk_branch2_disable+0x18/0x20
[  105.766994]  clk_core_disable+0x58/0xa8
[  105.771069]  clk_core_disable_lock+0x20/0x38
[  105.774803]  clk_disable+0x1c/0x28
[  105.779320]  __ufshcd_setup_clocks+0x298/0x308
[  105.782529]  ufshcd_suspend+0x160/0x308
[  105.786953]  ufshcd_shutdown+0x38/0xa0
[  105.790690]  ufshcd_pltfrm_shutdown+0x10/0x18
[  105.794512]  platform_drv_shutdown+0x20/0x30
[  105.798935]  device_shutdown+0x110/0x1e8
[  105.803278]  kernel_restart_prepare+0x34/0x40
[  105.807181]  kernel_restart+0x14/0x78
[  105.811434]  sys_reboot+0x200/0x248
[  105.815081]  el0_svc_naked+0x30/0x34
[  105.818378] ---[ end trace 8d2322276b27879c ]---

Mark gcc_ufs_tx_symbol_0_clk as BRANCH_HALT_SKIP as well.

Fixes: 12d807cd34 ("clk: qcom: gcc-msm8996: Disable halt check on UFS clocks")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-06 10:48:42 -07:00
Amit Nischal cfb8282e18 clk: qcom: Enable clocks which needs to be always on for SDM845
There are certain clocks which needs to be always enabled for system
operation. Add support for the same by adding 'CLK_IS_CRITICAL' flag
for such clocks.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-07-03 10:10:36 -07:00
Jerome Brunet 04cdd5af51 clk: qcom: drop CLK_SET_RATE_GATE from sdc clocks
the mmci driver (drivers/mmc/host/mmci.c) does the following sequence:
* clk_prepare_enable()
* clk_set_rate()

on SDCx_clk which is a children of SDCx_src. SDCx_src has
CLK_SET_RATE_GATE so this sequence should not be allowed but this was not
enforced. IOW, the flag is ignored. Dropping the flag won't change
anything to the current behaviour of the platform.

CLK_SET_RATE_GATE is being fixed and enforced now. If the flag was kept,
the mmci driver would receive -EBUSY when calling clk_set_rate()

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/20180619134051.16726-2-jbrunet@baylibre.com
2018-06-19 10:02:28 -07:00
Linus Torvalds 6419945e33 This time we have a good set of changes to the core framework that do some
general cleanups, but nothing too major. The majority of the diff goes to
 two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for
 Actions Semi so it takes up some lines to add all the different types, and
 the Qualcomm diff is there because we add support for two SoCs and it's quite
 a bit of data.
 
 Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And
 then the long tail of driver updates for various fixes and stuff follows
 after that.
 
 Core:
  - debugfs cleanups removing error checking and an unused provider API
  - Removal of a clk init typedef that isn't used
  - Usage of match_string() to simplify parent string name matching
  - OF clk helpers moved to their own file (linux/of_clk.h)
  - Make clk warnings more readable across kernel versions
 
 New Drivers:
  - Qualcomm SDM845 GCC and Video clk controllers
  - Qualcomm MSM8998 GCC
  - Actions Semi S900 SoC support
  - Nuvoton npcm750 microcontroller clks
  - Amlogic axg AO clock controller
 
 Removed Drivers:
  - Deprecated Rockchip clk-gate driver
 
 Updates:
  - debugfs functions stopped checking return values
  - Support for the MSIOF module clocks on Rensas R-Car M3-N
  - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
  - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
  - Berlin and Amlogic SPDX tagging
  - Usage of of_clk_get_parent_count() in more places
  - Proper implementation of the CDEV1/2 clocks on Tegra20
  - Allwinner H6 PRCM clock support and R40 EMAC support
  - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
  - Round closest support for meson's mpll driver
  - Support for meson8b nand clocks and gxbb video decoder clocks
  - Mediatek mali clks
  - STM32MP1 fixes
  - Uniphier LD11/LD20 stream demux system clock
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlsWxugACgkQrQKIl8bk
 lSVs2A/9HOMsWeiYx1MESrXw6N2UknWeqeT/b1v8L/VOiptJg+OTExPbzmSylngv
 AXJAfIkCpguSMh9b310pA3DAzk5docmbQ4zL977yY+KXmOcDooCd34aG5a+tB3ie
 ugC8T2bQLrJdMp3hsqaKZsYzqe7LoW2NJgoliXDMA/QUBLpvHq+fcu2zOawingTA
 GNc3LGqP5Op7p09aPK30gtQNqLK5qGpHASa/AY7Y0PXlUeTZ8rmF06fcEAg5shkC
 CT57Zy2rSFB2RorEJarYXDPLRHMw/jxXtpMVXEy7zuz/3ajvvRiZDHv75+NaBru9
 hDt1rzslzexEN4fYzj4AtGYRKyBrHbDaxG1qdIWPWVyoE0CEb+dZ1gH7/Ski5r+s
 z5D28NogC0T0sey6yWssyG3RLvkPJ5nxUhL++siHm1lbyo16LmhB1+nFvxrlzmBB
 0V1xqEa7feYpD+JD66lJFb5ornHLwGtVYBpeiY+hrDR3ddWEe1IxaYGR2p9nHwSS
 Us/ZQdHIYBVEqoo3+BWnTn+HSQzmd/sqHqWnLlVWUHoomm5nXx18PeS87vFbcPv9
 dMr+FFJ3Elubzcy5UZJPfNw+pb+teE7tYGQkQ3nbLRxT1YZOoIJZJDqNKxM1cgne
 6c/VXJMEyBBn/w7Iru/3eWCZVQJGlmYS47DFDzduFvd3LMfmKIM=
 =KK/v
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time we have a good set of changes to the core framework that do
  some general cleanups, but nothing too major. The majority of the diff
  goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is
  introduced for Actions Semi so it takes up some lines to add all the
  different types, and the Qualcomm diff is there because we add support
  for two SoCs and it's quite a bit of data.

  Otherwise the big driver updates are on TI Davinci and Amlogic
  platforms. And then the long tail of driver updates for various fixes
  and stuff follows after that.

  Core:
   - debugfs cleanups removing error checking and an unused provider API
   - Removal of a clk init typedef that isn't used
   - Usage of match_string() to simplify parent string name matching
   - OF clk helpers moved to their own file (linux/of_clk.h)
   - Make clk warnings more readable across kernel versions

  New Drivers:
   - Qualcomm SDM845 GCC and Video clk controllers
   - Qualcomm MSM8998 GCC
   - Actions Semi S900 SoC support
   - Nuvoton npcm750 microcontroller clks
   - Amlogic axg AO clock controller

  Removed Drivers:
   - Deprecated Rockchip clk-gate driver

  Updates:
   - debugfs functions stopped checking return values
   - Support for the MSIOF module clocks on Rensas R-Car M3-N
   - Support for the new Rensas RZ/G1C and R-Car E3 SoCs
   - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs
   - Berlin and Amlogic SPDX tagging
   - Usage of of_clk_get_parent_count() in more places
   - Proper implementation of the CDEV1/2 clocks on Tegra20
   - Allwinner H6 PRCM clock support and R40 EMAC support
   - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet
   - Round closest support for meson's mpll driver
   - Support for meson8b nand clocks and gxbb video decoder clocks
   - Mediatek mali clks
   - STM32MP1 fixes
   - Uniphier LD11/LD20 stream demux system clock"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
  clk: qcom: Export clk_fabia_pll_configure()
  clk: bcm: Update and add Stingray clock entries
  dt-bindings: clk: Update Stingray binding doc
  clk-si544: Properly round requested frequency to nearest match
  clk: ingenic: jz4770: Add 150us delay after enabling VPU clock
  clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock
  clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle
  clk: ingenic: jz4770: Change OTG from custom to standard gated clock
  clk: ingenic: Support specifying "wait for clock stable" delay
  clk: ingenic: Add support for clocks whose gate bit is inverted
  clk: use match_string() helper
  clk: bcm2835: use match_string() helper
  clk: Return void from debug_init op
  clk: remove clk_debugfs_add_file()
  clk: tegra: no need to check return value of debugfs_create functions
  clk: davinci: no need to check return value of debugfs_create functions
  clk: bcm2835: no need to check return value of debugfs_create functions
  clk: no need to check return value of debugfs_create functions
  clk: imx6: add EPIT clock support
  clk: mvebu: use correct bit for 98DX3236 NAND
  ...
2018-06-09 12:06:24 -07:00
Kees Cook 0ed2dd03b9 treewide: Use struct_size() for devm_kmalloc() and friends
Replaces open-coded struct size calculations with struct_size() for
devm_*, f2fs_*, and sock_* allocations. Automatically generated (and
manually adjusted) from the following Coccinelle script:

// Direct reference to struct field.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL);
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
identifier VAR, ELEMENT;
expression COUNT;
@@

- alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP)
+ alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP)

// Same pattern, but can't trivially locate the trailing element name,
// or variable name.
@@
identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc";
expression HANDLE;
expression GFP;
expression SOMETHING, COUNT, ELEMENT;
@@

- alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP)
+ alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-06 11:15:43 -07:00
Stephen Boyd a74271a507 Merge branch 'clk-qcom-8996-halt' into clk-next
* clk-qcom-8996-halt:
  clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
  clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
2018-06-04 12:35:59 -07:00
Stephen Boyd 77122d6f74 Merge branch 'clk-qcom-sdm845' into clk-next
* clk-qcom-sdm845:
  clk: qcom: Export clk_fabia_pll_configure()
  clk: qcom: Add video clock controller driver for SDM845
  dt-bindings: clock: Introduce QCOM Video clock bindings
  clk: qcom: Add Global Clock controller (GCC) driver for SDM845
  clk: qcom: Add DT bindings for SDM845 gcc clock controller
  clk: qcom: Configure the RCGs to a safe source as needed
  clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
  clk: qcom: Simplify gdsc status checking logic
  clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
  clk: qcom: gdsc: Add support to poll for higher timeout value
  clk: qcom: gdsc: Add support to reset AON and block reset logic
  clk: qcom: Add support for controlling Fabia PLL
  clk: qcom: Clear hardware clock control bit of RCG

Also fixup the Kconfig mess where SDM845 GCC has msm8998 in the
description and also the video Kconfig says things slightly differently
from the GCC one so just make it the same.
2018-06-04 12:34:51 -07:00
Stephen Boyd 45ba387511 Merge branches 'clk-allwinner', 'clk-rockchip', 'clk-tegra', 'clk-berlin' and 'clk-qcom-mmagic' into clk-next
* clk-allwinner:
  clk: sunxi-ng: r40: export a regmap to access the GMAC register
  clk: sunxi-ng: r40: rewrite init code to a platform driver
  clk: sunxi-ng: add support for H6 PRCM CCU

* clk-rockchip:
  clk: rockchip: remove deprecated gate-clk code and dt-binding
  clk: rockchip: use match_string() helper

* clk-tegra:
  clk: tegra: Add quirk for getting CDEV1/2 clocks on Tegra20
  clk: tegra20: Correct parents of CDEV1/2 clocks
  clk: tegra20: Add DEV1/DEV2 OSC dividers

* clk-berlin:
  clk: berlin: switch to SPDX license identifier

* clk-qcom-mmagic:
  clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled
  clk: qcom: Register the gdscs before the clocks
  clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
2018-06-04 12:27:44 -07:00
Stephen Boyd 872e47f75f Merge branches 'clk-qcom-rpmh', 'clk-npcm7xx', 'clk-of-parent-count' and 'clk-qcom-rcg-fix' into clk-next
* clk-qcom-rpmh:
  dt-bindings: clock: Introduce QCOM RPMh clock bindings

* clk-npcm7xx:
  clk: npcm7xx: fix return value check in npcm7xx_clk_init()
  clk: npcm7xx: add clock controller
  dt-binding: clk: npcm750: Add binding for Nuvoton NPCM7XX Clock

* clk-of-parent-count:
  pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding
  soc/tegra: pmc: Use of_clk_get_parent_count() instead of open coding
  soc: rockchip: power-domain: Use of_clk_get_parent_count() instead of open coding
  ARM: timer-sp: Use of_clk_get_parent_count() instead of open coding
  clk: Extract OF clock helpers in <linux/of_clk.h>

* clk-qcom-rcg-fix:
  clk: qcom: Base rcg parent rate off plan frequency
2018-06-04 12:27:29 -07:00
Stephen Boyd a3dcdc7e54 clk: qcom: Export clk_fabia_pll_configure()
This is used by the video clk driver on sdm845 and that's a module.
Export it to prevent module build failures.

Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-02 00:20:41 -07:00
Bjorn Andersson 12d807cd34 clk: qcom: gcc-msm8996: Disable halt check on UFS clocks
The halt check of the UFS symbol clocks always fails, as such probing
UFS after clk_disable_unused always fails. This makes it impossible to
boot a system with the UFS phy or UFS HCD drivers compiled as modules.

Follow SDM845 and disable the halt check on these clocks.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 12:22:06 -07:00
Amit Nischal c646b34766 clk: qcom: Add video clock controller driver for SDM845
Add support for the video clock controller found on SDM845
based devices. This would allow video drivers to probe and
control their clocks.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 11:49:08 -07:00
Manu Gautam 096abdc296 clk: msm8996-gcc: Mark halt check as no-op for USB/PCIE pipe_clk
The USB and PCIE pipe clocks are sourced from external clocks
inside the QMP USB/PCIE PHYs. Enabling or disabling of PIPE RCG
clocks is dependent on PHY initialization sequence hence
update halt_check to BRANCH_HALT_SKIP for these clocks so
that clock status bit is not polled when enabling or disabling
the clocks. It allows to simplify PHY client driver code which
is both user and source of the pipe_clk and avoid error logging
related status check on clk_disable/enable.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 11:36:15 -07:00
Rajendra Nayak 7705bb7176 clk: qcom: mmcc-msm8996: leave all mmagic gdscs and clocks always enabled
There's no bus infrastructure today to handle all the mmagic bus
clocks and GDSCs needed by all the multimedia blocks in msm8996, like
mdss, video, camera and gpu. Mark all these clocks with a CLK_IS_CRITICAL
and GDSCs with a ALWAYS_ON flag for now so they are left always enabled.
This patch should be reverted at some point when we do have a bus driver
to manage these clocks and GDSCs.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 11:14:55 -07:00
Rajendra Nayak 31543ebb8a clk: qcom: Register the gdscs before the clocks
We have atleast some instances of ALWAYS_ON gdscs, which need to
be turned ON *before* some clocks within the gdsc domain marked
with a CLK_IS_CRITICAL can be turned ON.
To facilitate this sequence, register the GDCSs (and hence handle
the ALWAYS_ON gdscs) before we register clocks (and handle the
clocks marked as CLK_IS_CRITICAL)

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 11:14:52 -07:00
Rajendra Nayak fb55bea1fe clk: qcom: gdsc: Add support for ALWAYS_ON gdscs
Some GDSCs might have software control to turn them off, but we might
want to keep them enabled always, in some cases because of lack of
support in kernel to handle a graceful turning off/on of such GDSCs.
Most common instances would be the GDCSs which power up the noc/bus
fabrics, which need bus drivers to handle them and atleast support for
which is missing on all qcom SoCs.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-06-01 11:14:48 -07:00
Evan Green c7d2a0eb6c clk: qcom: Base rcg parent rate off plan frequency
_freq_tbl_determine_rate uses the pre_div found in the clock plan
multiplied by the requested rate from the caller to determine the
best parent rate to set. If the requested rate is not exactly equal
to the rate that was found in the clock plan, then using the requested
rate in parent rate calculations is incorrect. For instance, if 150MHz
was requested, but 200MHz was the match found, and that plan had a
pre_div of 3, then the parent should be set to 600MHz, not 450MHz.

Signed-off-by: Evan Green <evgreen@chromium.org>
Fixes: bcd61c0f53 ("clk: qcom: Add support for root clock generators (RCGs)")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-10 11:45:32 -07:00
Taniya Das 06391eddb6 clk: qcom: Add Global Clock controller (GCC) driver for SDM845
Add support for the global clock controller found on SDM845
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal 7d99ced8f4 clk: qcom: Add support for BRANCH_HALT_SKIP flag for branch clocks
There could be few clocks where the clock status bit is not
required to be polled as the clock on/off would be controlled
by enabling/disabling external source. Add support for the
same by introducing new flag named as 'BRANCH_HALT_SKIP'.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
[sboyd@kernel.org: Rename flag to BRANCH_HALT_SKIP]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Stephen Boyd 88051f55de clk: qcom: Simplify gdsc status checking logic
The code is complicated because we want to check if the GDSC is enabled
or disabled based on different bits in different registers while the
GDSC hardware is slightly different across chips. Furthermore, we poll
the status of the enable or disable state by checking if the gdsc is
enabled or not, and then comparing that to if the gdsc is being enabled
or disabled. Let's push all that into one function, so we can ask if the
status matches what we want, either on or off. Then the call site can
just ask that question, and the logic to check that state can simply
return yes or no, and not 1 or 0 or 0 or 1 depending on if we're
enabling or disabling respectively.

Tested-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal 7ef6f11887 clk: qcom: Configure the RCGs to a safe source as needed
For some root clock generators, there could be child branches which are
controlled by an entity other than application processor subsystem. For
such RCGs, as per application processor subsystem clock driver, all of
its downstream clocks are disabled and RCG is in disabled state but in
reality downstream clocks can be left enabled before.

So in this scenario, when RCG is disabled as per clock driver's point of
view and when rate scaling request comes before downstream clock enable
request, then RCG fails to update its configuration because in reality
RCG is on and it expects its new source to already be in enable state but
in reality new source is off. In order to avoid having the RCG to go into
an invalid state, add support to update the CFG, M, N and D registers
during set_rate() without configuration update and defer the actual RCG
configuration update to be done during clk_enable() as at this point of
time, both its new parent and safe source will be already enabled and RCG
can safely switch to new parent.

During clk_disable() request, configure it to safe source as both its
parents, safe source and current parent will be enabled and RCG can
safely execute a switch.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-08 11:22:55 -07:00
Amit Nischal e892e17d0c clk: qcom: gdsc: Add support to poll CFG register to check GDSC state
The default behavior of the GDSC enable/disable sequence is to
poll the status bits of either the actual GDSCR or the
corresponding HW_CTRL registers.

On targets which have support for a CFG_GDSCR register, the
status bits might not show the correct state of the GDSC,
especially in the disable sequence, where the status bit
will be cleared even before the core is completely power
collapsed. On targets with this issue, poll the power on/off
bits in the CFG_GDSCR register instead to correctly determine
the GDSC state.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-05-01 16:34:07 -07:00
Joonwoo Park b5f5f525c5 clk: qcom: Add MSM8998 Global Clock Control (GCC) driver
Add support for the global clock controller found on MSM8998
based devices. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Imran Khan <kimran@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: Specify regs for alpha_plls, fix white spaces and add binding]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-16 22:51:27 -07:00
Amit Nischal 9fb38caee2 clk: qcom: gdsc: Add support to poll for higher timeout value
For some gdscs, it might take longer time up to 500us for updating their
status. Update the timeout value for all GDSC polling status.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-16 21:12:13 -07:00
Amit Nischal 44dbeebf14 clk: qcom: gdsc: Add support to reset AON and block reset logic
For some of the gdsc power domains, there could be need to reset the
AON logic or assert/deassert the block control reset before removing
the clamp_io. Add support for the same by introducing new flags
SW_RESET and AON_RESET. Both SW reset and AON reset requires to be
asserted for at least 1us before being de-asserted.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-04-16 21:12:12 -07:00
Linus Torvalds ca4e7c5120 The large diff this time around is from the addition of a new clk driver
for the TI Davinci family of SoCs. So far those clks have been supported
 with a custom implementation of the clk API in the arch port instead of in
 the CCF. With this driver merged we're one step closer to having a single
 clk API implementation.
 
 The other large diff is from the Amlogic clk driver that underwent some
 major surgery to use regmap. Beyond that, the biggest hitter is Samsung
 which needed some reworks to properly handle clk provider power domains
 and a bunch of PLL rate updates.
 
 The core framework was fairly quiet this round, just getting some cleanups
 and small fixes for some of the more esoteric features. And the usual
 set of driver non-critical fixes, cleanups, and minor additions are here as
 well.
 
 Core:
  - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
  - debugfs ops macroized to shave some lines of boilerplate code
  - Always calculate the phase instead of caching it in clk_get_phase()
  - More __must_check on bulk clk APIs
 
 New Drivers:
  - TI's Davinci family of SoCs
  - Intel's Stratix10 SoC
  - stm32mp157 SoC
  - Allwinner H6 CCU
  - Silicon Labs SI544 clock generator chip
  - Renesas R-Car M3-N and V3H SoCs
  - i.MX6SLL SoCs
 
 Removed Drivers:
  - ST-Ericsson AB8540/9540
 
 Updates:
  - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
  - STM32F469 DSI and STM32F769 sdmmc2 support
  - GPIO clks can sleep now
  - Spreadtrum SC9860 RTC clks
  - Nvidia Tegra MBIST workarounds and various minor fixes
  - Rockchip phase handling fixes and a memory leak plugged
  - Renesas drivers switch to readl/writel from clk_readl/clk_writel
  - Renesas gained CPU (Z/Z2) and watchdog support
  - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
  - Qualcomm PM8921 PMIC XO buffers
  - Amlogic migrates to regmap APIs
  - TI Keystone clk latching support
  - Allwinner H3 and H5 video clk fixes
  - Broadcom BCM2835 PLLs needed another bit to enable
  - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
  - i.MX6UL/ULL epdc_podf support
  - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlrPhMARHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVkkxAArsItSoxQV18kQlJ9S7o2z75giquXQfvy
 Y/cKIIY1kz4K+qm+rpbl6PjukrSPtfM+wGmepGt+CptOdlj672viFxI7zjrd1iSy
 /xJo7d5/nZxvmx0qcwYWVTCOsU+4FUUkpq5mE91KEvwny/qgRqEgWeLoWTDLBktF
 MzGtBUYudjkRYLd2I31DGB3dqI0Dy9JwuEpJfCAt5h4dztml3aNjYknjQ/vUSEXL
 61mSYM1fwzK8rnrjSlQqb+X0OoJ6d5Pz2uHRXnWfGlS8UOh5N9NFGKpiErLm+h/+
 /FigA6f9HBeUneNf5Dnu568FHwE2FyUbZKVd40OYj3x128OnAoKUoRt68/8FQPdf
 NoQb3zH3Ha1JbwWgvQ9RkWp82kYnMctrlkh6IFye/FxdfwCWA4SE/iIgJXRJbQ/K
 blZz14jkXT8oISqy6nryGv3CK/RFXzVdvVa4z41xHc4cnLpNBsv1o89a+9MyTvMD
 wYOnc/98/l5xYs5PvQqNrd/onE0GLIeOEtkWNXH0OACe6FOIuz5eVn4Uh8aIm0wl
 +EHwHRwB7AQK+a7jwEfQ88aceAntvFlymUUcsncyCXn2s0knc5BHJPSHhoZk1tJb
 Wv2Fcln3Mwjhhq9aoNxfAJf4pIqmFgdQEtwyND4GJlP55Xay5QMZVEdwnNfFDvmf
 X6P2pfkBqkg=
 =ys4O
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "The large diff this time around is from the addition of a new clk
  driver for the TI Davinci family of SoCs. So far those clks have been
  supported with a custom implementation of the clk API in the arch port
  instead of in the CCF. With this driver merged we're one step closer
  to having a single clk API implementation.

  The other large diff is from the Amlogic clk driver that underwent
  some major surgery to use regmap. Beyond that, the biggest hitter is
  Samsung which needed some reworks to properly handle clk provider
  power domains and a bunch of PLL rate updates.

  The core framework was fairly quiet this round, just getting some
  cleanups and small fixes for some of the more esoteric features. And
  the usual set of driver non-critical fixes, cleanups, and minor
  additions are here as well.

  Core:
   - Rejig clk_ops::init() to be a little earlier for phase/accuracy ops
   - debugfs ops macroized to shave some lines of boilerplate code
   - Always calculate the phase instead of caching it in clk_get_phase()
   - More __must_check on bulk clk APIs

  New Drivers:
   - TI's Davinci family of SoCs
   - Intel's Stratix10 SoC
   - stm32mp157 SoC
   - Allwinner H6 CCU
   - Silicon Labs SI544 clock generator chip
   - Renesas R-Car M3-N and V3H SoCs
   - i.MX6SLL SoCs

  Removed Drivers:
   - ST-Ericsson AB8540/9540

  Updates:
   - Mediatek MT2701 and MT7622 audsys support and MT2712 updates
   - STM32F469 DSI and STM32F769 sdmmc2 support
   - GPIO clks can sleep now
   - Spreadtrum SC9860 RTC clks
   - Nvidia Tegra MBIST workarounds and various minor fixes
   - Rockchip phase handling fixes and a memory leak plugged
   - Renesas drivers switch to readl/writel from clk_readl/clk_writel
   - Renesas gained CPU (Z/Z2) and watchdog support
   - Rockchip rk3328 display clks and rk3399 1.6GHz PLL support
   - Qualcomm PM8921 PMIC XO buffers
   - Amlogic migrates to regmap APIs
   - TI Keystone clk latching support
   - Allwinner H3 and H5 video clk fixes
   - Broadcom BCM2835 PLLs needed another bit to enable
   - i.MX6SX CKO mux fix and i.MX7D Video PLL divider fix
   - i.MX6UL/ULL epdc_podf support
   - Hi3798CV200 COMBPHY0 and USB2_OTG_UTMI and phase support for eMMC"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (233 commits)
  clk: davinci: add a reset lookup table for psc0
  clk: imx: add clock driver for imx6sll
  dt-bindings: imx: update clock doc for imx6sll
  clk: imx: add new gate/gate2 wrapper funtion
  clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux
  clk: cs2000: set pm_ops in hibernate-compatible way
  clk: bcm2835: De-assert/assert PLL reset signal when appropriate
  clk: imx7d: Move clks_init_on before any clock operations
  clk: imx7d: Correct ahb clk parent select
  clk: imx7d: Correct dram pll type
  clk: imx7d: Add USB clock information
  clk: socfpga: stratix10: add clock driver for Stratix10 platform
  dt-bindings: documentation: add clock bindings information for Stratix10
  clk: ti: fix flag space conflict with clkctrl clocks
  clk: uniphier: add additional ethernet clock lines for Pro4
  clk: uniphier: add SATA clock control support
  clk: uniphier: add PCIe clock control support
  clk: Add driver for the si544 clock generator chip
  clk: davinci: Remove redundant dev_err calls
  clk: uniphier: add ethernet clock control support for PXs3
  ...
2018-04-13 15:51:06 -07:00
Stephen Boyd fbc20b8c3c Merge branches 'clk-mvebu', 'clk-phase', 'clk-nxp', 'clk-mtk2712' and 'clk-qcom-rpmcc' into clk-next
* clk-mvebu:
  clk: mvebu: armada-38x: add support for missing clocks
  clk: mvebu: cp110: Fix clock tree representation

* clk-phase:
  clk: Don't show the incorrect clock phase
  clk: update cached phase to respect the fact when setting phase

* clk-nxp:
  clk: lpc32xx: Set name of regmap_config

* clk-mtk2712:
  clk: mediatek: update clock driver of MT2712
  dt-bindings: clock: add clocks for MT2712

* clk-qcom-rpmcc:
  clk: qcom: rpmcc: Add support to XO buffered clocks
2018-04-06 13:21:52 -07:00
Stephen Boyd caa9f3b7d7 Merge branches 'clk-versatile', 'clk-doc', 'clk-must-check', 'clk-qcom' and 'clk-debugfs' into clk-next
* clk-versatile:
  clk: versatile: Remove WARNs in ->round_rate()
  clk: versatile: add min/max rate boundaries for vexpress osc clock

* clk-doc:
  Documentation: clk: enable lock is not held for clk_is_enabled API

* clk-must-check:
  clk: add more __must_check for bulk APIs

* clk-qcom:
  clk: qcom: smd-rpm: Migrate to devm_of_clk_add_hw_provider()
  clk: qcom: gcc-msm8996: Mark aggre0 noc clks as critical

* clk-debugfs:
  clk: Re-use DEFINE_SHOW_ATTRIBUTE() macro
2018-04-06 13:21:39 -07:00
Amit Nischal 687d7a0caa clk: qcom: Add support for controlling Fabia PLL
Fabia PLL is a Digital Frequency Locked Loop (DFLL) clock
generator which has a wide range of frequency output. It
supports dynamic updating of the output frequency
("frequency slewing") without need to turn off the PLL
before configuration. Add support for initial configuration
and programming sequence to control fabia PLLs.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
[sboyd: Shorten code a little]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 16:32:36 -07:00
Amit Nischal bdc3bbdd40 clk: qcom: Clear hardware clock control bit of RCG
For upcoming targets like sdm845, POR value of the hardware clock control
bit is set for most of root clocks which needs to be cleared for software
to be able to control. For older targets like MSM8996, this bit is reserved
bit and having POR value as 0 so this patch will work for the older targets
too. So update the configuration mask to take care of the same to clear
hardware clock control bit.

Signed-off-by: Amit Nischal <anischal@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 15:55:38 -07:00
Srinivas Kandagatla 8bcde6582c clk: qcom: rpmcc: Add support to XO buffered clocks
XO is onchip buffer clock to generate 19.2MHz.

This patch adds support to 5 XO buffer clocks found on PMIC8921,
these buffer clocks can be controlled from external pin or in
manual mode.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-19 14:40:26 -07:00
Stephen Boyd 91927ff644 clk: qcom: smd-rpm: Migrate to devm_of_clk_add_hw_provider()
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16 15:52:39 -07:00
Srinivas Kandagatla 496037c015 clk: qcom: gcc-msm8996: Mark aggre0 noc clks as critical
aggre0 bus clks are not associated with any of the drivers, so its
important that these clks are always on to get peripherals on this
bus working. So mark them as critical.

Eventually when we have a proper bus driver these clks can be marked
appropriately.

Without this patch pcie on db820c is not functional.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-16 15:35:35 -07:00
Wei Yongjun 55c19eee3b clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe()
In case of error, the function dev_get_regmap() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: 81ac38847a ("clk: qcom: Add APCS clock controller support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-12 15:14:24 -07:00
Jerome Brunet f5edaefee2 clk: qcom: use divider_ro_round_rate helper
There is now an helper function to round the rate when the
divider is read-only. Let's use it

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-12 15:10:27 -07:00
Stephen Boyd 716d9b1d4a Merge branch 'clk-divider-container' into clk-next
* clk-divider-container:
  clk: divider: fix incorrect usage of container_of

Plus fixup sprd/div.c to pass the width too.
2018-01-26 16:43:14 -08:00
Stephen Boyd 0003046477 Merge branches 'clk-iproc', 'clk-mvebu' and 'clk-qcom-a53' into clk-next
* clk-iproc:
  clk: iproc: Minor tidy up of iproc pll data structures
  clk: iproc: Allow plls to do minor rate changes without reset
  clk: iproc: Fix error in the pll post divider rate calculation
  clk: iproc: Allow iproc pll to runtime calculate vco parameters

* clk-mvebu:
  clk: mvebu: armada-37xx-periph: Use PTR_ERR_OR_ZERO()

* clk-qcom-a53:
  clk: qcom: Add APCS clock controller support
  clk: qcom: Add regmap mux-div clocks support
  clk: qcom: Add A53 PLL support
2018-01-26 16:41:58 -08:00
Stephen Boyd 21170e3bda Merge branches 'clk-spreadtrum', 'clk-mvebu-dvfs', 'clk-qoriq', 'clk-imx' and 'clk-qcom-ipq8074' into clk-next
* clk-spreadtrum:
  clk: sprd: add clocks support for SC9860
  clk: sprd: Add dt-bindings include file for SC9860
  dt-bindings: Add Spreadtrum clock binding documentation
  clk: sprd: add adjustable pll support
  clk: sprd: add composite clock support
  clk: sprd: add divider clock support
  clk: sprd: add mux clock support
  clk: sprd: add gate clock support
  clk: sprd: Add common infrastructure
  clk: move clock common macros out from vendor directories

* clk-mvebu-dvfs:
  clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
  clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS
  clk: mvebu: armada-37xx-periph: cosmetic changes

* clk-qoriq:
  clk: qoriq: add more divider clocks support

* clk-imx:
  clk: imx51: uart4, uart5 gates only exist on imx50, imx53

* clk-qcom-ipq8074:
  clk: qcom: ipq8074: add misc resets for PCIE and NSS
  dt-bindings: clock: qcom: add misc resets for PCIE and NSS
  clk: qcom: ipq8074: add GP and Crypto clocks
  clk: qcom: ipq8074: add NSS ethernet port clocks
  clk: qcom: ipq8074: add NSS clocks
  clk: qcom: ipq8074: add PCIE, USB and SDCC clocks
  clk: qcom: ipq8074: add remaining PLL’s
  dt-bindings: clock: qcom: add remaining clocks for IPQ8074
  clk: qcom: ipq8074: fix missing GPLL0 divider width
  clk: qcom: add parent map for regmap mux
  clk: qcom: add read-only divider operations
2018-01-26 16:41:47 -08:00
Stephen Boyd 74b48999b1 Merge branches 'clk-qcom-alpha-pll', 'clk-check-ops-ptr', 'clk-protect-rate' and 'clk-omap' into clk-next
* clk-qcom-alpha-pll:
  clk: qcom: add read-only alpha pll post divider operations
  clk: qcom: support for 2 bit PLL post divider
  clk: qcom: support Brammo type Alpha PLL
  clk: qcom: support Huayra type Alpha PLL
  clk: qcom: support for dynamic updating the PLL
  clk: qcom: support for alpha mode configuration
  clk: qcom: flag for 64 bit CONFIG_CTL
  clk: qcom: fix 16 bit alpha support calculation
  clk: qcom: support for alpha pll properties

* clk-check-ops-ptr:
  clk: check ops pointer on clock register

* clk-protect-rate:
  clk: fix set_rate_range when current rate is out of range
  clk: add clk_rate_exclusive api
  clk: cosmetic changes to clk_summary debugfs entry
  clk: add clock protection mechanism to clk core
  clk: use round rate to bail out early in set_rate
  clk: rework calls to round and determine rate callbacks
  clk: add clk_core_set_phase_nolock function
  clk: take the prepare lock out of clk_core_set_parent
  clk: fix incorrect usage of ENOSYS

* clk-omap:
  clk: ti: Drop legacy clk-3xxx-legacy code
2018-01-26 16:41:39 -08:00
Georgi Djakov 81ac38847a clk: qcom: Add APCS clock controller support
Add a driver for the APCS clock controller. It is part of the APCS
hardware block, which among other things implements also a combined
mux and half integer divider functionality. It can choose between a
fixed-rate clock or the dedicated APCS (A53) PLL. The source and the
divider can be set both at the same time.

This is required for enabling CPU frequency scaling on MSM8916-based
platforms.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
[sboyd@codeaurora.org: Include rcg header for parent_map, drop
multiple unneeded includes, add COMPILE_TEST to APCS depends,
made tristate/modular]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-02 10:00:25 -08:00
Georgi Djakov 081bfeed5f clk: qcom: Add regmap mux-div clocks support
Add support for hardware that can switch both parent clock and divider
at the same time. This avoids generating intermediate frequencies from
either the old parent clock and new divider or new parent clock and
old divider combinations.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
[sboyd@codeaurora.org: Change a comment style, drop parent_map in
favor of a u32 array instead, export symbols for clk_ops and mux
function]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2018-01-02 10:00:24 -08:00