Commit Graph

282 Commits

Author SHA1 Message Date
Stephen Boyd ff20783f7b clk: qcom: Fix MN frequency tables, parent map, and jpegd
Clocks that don't have a pre-divider don't list any pre-divider
in their frequency tables, but their tables are initialized using
aggregate initializers. Use tagged initializers so we properly
assign the m and n values for each frequency. Furthermore, the
mmcc_pxo_pll8_pll2_pll3 array improperly mapped the second
element to pll2 instead of pll8, causing the clock driver to
recalculate the wrong rate for any clocks using this array along
with a rate that uses pll2. Plus the .num_parents field is 3
instead of 4 so you can't even switch the parent to pll3. Finally
I noticed that the jpegd clock improperly indicates that the
pre-divider width is only 2, when it's actually 4 bits wide.

Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)"
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15 16:39:00 -07:00
Stephen Boyd 404c1ff67d clk: qcom: Support bypass RCG configuration
In the case of HDMI clocks, we want to bypass the RCG's ability
to divide the output clock and pass through the parent HDMI PLL
rate. Add a simple set of clk_ops to configure the RCG to do
this. This removes the need to keep adding more frequency entries
to the tv_src clock whenever we want to support a new rate.

Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15 16:38:59 -07:00
Kumar Gala 24d8fba44a clk: qcom: Add support for IPQ8064's global clock controller (GCC)
Add a driver for the global clock controller found on IPQ8064 based
platforms. This should allow most non-multimedia device drivers to probe
and control their clocks.

This is currently missing clocks for USB HSIC and networking devices.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andy Gross <agross@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15 16:38:58 -07:00
Georgi Djakov 2b46cd23a5 clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support
Add support for the multimedia clock controller found on the APQ8084
based platforms. This will allow the multimedia device drivers to
control their clocks.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
[sboyd: Rework parent mapping to avoid conflicts]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-15 16:38:57 -07:00
Georgi Djakov 5424e10281 clk: qcom: Add APQ8084 clocks for SATA, PCIe and UFS
Add the necessary clocks for SATA, PCIe and UFS to the
APQ8084 global clock controller (GCC). This will allow
the above device drivers to control their clocks.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11 13:23:33 -07:00
Georgi Djakov 0282465320 clk: qcom: Add APQ8084 Global Clock Controller support
This patch adds support for the global clock controller found on
the APQ8084 based devices. This includes UART, I2C, SPI etc.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11 13:22:00 -07:00
Stephen Boyd 5f775498bd clk: qcom: Fully support apq8064 global clock control
Add in the handful of new clocks and introduce a new reset table
with the few new resets.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11 13:21:22 -07:00
Srinivas Kandagatla 7f9b72ae97 clk: qcom: add clocks necessary for apq8064 sdcc
This patch adds clocks necessary for SD card controller on apq8064 SOC.
Without this patch the clocks are not visible to the sdcc driver.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-11 13:21:21 -07:00
Stephen Boyd c556bcddc7 clk: qcom: HDMI source sel is 3 not 2
The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix
the code so that we can properly select the HDMI PLL.

Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)"
Reported-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02 16:33:18 -07:00
Stephen Boyd 9ec2749bde clk: qcom: Return error pointers for unimplemented clocks
Not all clocks are implemented but client drivers can still
request them. Currently we will return a NULL pointer to them if
the clock isn't implemented in software but NULL pointers are
valid clock pointers. Return an error pointer so that driver's
don't proceed without a clock they may actually need.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:25 -07:00
Stephen Boyd c685841ee1 clk: qcom: Support msm8974pro global clock control hardware
A new PLL (gpll4) is added on msm8974 PRO devices to support a
faster sdc1 clock rate. Add support for this and the two new sdcc
cal clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:24 -07:00
Stephen Boyd b7b7cc7034 clk: qcom: Properly support display clocks on msm8974
The display clocks all source from dedicated phy PLLs within their
respective multimedia hardware block. Hook up these PLLs to the
display clocks with the appropriate parent mappings, clock flags,
and the appropriate clock ops. This should allow the display
clocks to work once the appropriate phy PLL driver registers their
PLL clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:24 -07:00
Stephen Boyd 99cbd064b0 clk: qcom: Support display RCG clocks
Add support for the DSI/EDP/HDMI RCG clocks. With the proper
display driver in place this should allow us to support display
clocks on msm8974 based devices.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:23 -07:00
Stephen Boyd 9d011f3b71 clk: qcom: Return highest rate when round_rate() exceeds plan
Some drivers may want to call clk_set_rate() with a very large
number to force the clock to go as fast as it possibly can
without having to know the range between the highest rate and
second highest rate. Add support for this by defaulting to the
highest rate in the frequency table if we can't find a frequency
greater than what is requested.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:22 -07:00
Stephen Boyd 437ae6a1b8 clk: qcom: Fix mmcc-8974's PLL configurations
We forgot to add the status bit for the PLLs and we were using
the wrong register and masks for configuration, leading to
unexpected PLL configurations. Fix this.

Fixes: d8b212014e (clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:21 -07:00
Stephen Boyd aa014149ba clk: qcom: Fix clk_rcg2_is_enabled() check
If the bit is set the clock is off so we should be checking for
a clear bit, not a set bit. Invert the logic.

Fixes: bcd61c0f53 (clk: qcom: Add support for root clock generators (RCGs))
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-29 09:30:20 -07:00
Georgi Djakov 63a00269cb clk: qcom: Fix blsp2_ahb_clk register offset
The address of the blsp2_ahb_clk register is incorrect. Fix it.

Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-23 15:54:55 -07:00
Stephen Boyd d15998e095 clk: qcom: Fix msm8660 GCC probe
When consolidating the msm8660 GCC probe code I forgot to keep
around these temporary clock registrations. Put them back so the
clock tree is not entirely orphaned.

Fixes: 49fc825f0c (clk: qcom: Consolidate common probe code)
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-16 16:53:07 -07:00
Kumar Gala 2c07e3c7dd clk: qcom: Various fixes for MSM8960's global clock controller
* Remove CE2_SLEEP_CLK, doesn't exist on 8960 family SoCs
* Fix incorrect offset for PMIC_SSBI2_RESET
* Fix typo:
	SIC_TIC -> SPS_TIC_H
	SFAB_ADM0_M2_A_CLK -> SFAB_ADM0_M2_H_CLK
* Fix naming convention:
	SFAB_CFPB_S_HCLK -> SFAB_CFPB_S_H_CLK
	SATA_SRC_CLK -> SATA_CLK_SRC

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:54:16 -07:00
Kumar Gala 2d85a713dc clk: qcom: Add basic support for APQ8064 global clock controller clocks
The APQ8064 and MSM8960 share a significant amount of clock data and
code between the two SoCs.  Rather than duplicating the data we just add
support for a unqiue APQ8064 clock table into the MSM8960 code.

For now add just enough clocks to get a basic serial port going on an
APQ8064 device.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: trivial conflict due to missing ipq8064 support]
2014-04-30 11:54:16 -07:00
Stephen Boyd 49fc825f0c clk: qcom: Consolidate common probe code
Most of the probe code is the same between all the different
clock controllers. Consolidate the code into a common.c file.
This makes changes to the common probe parts easier and reduces
chances for bugs.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-30 11:51:51 -07:00
Stephen Boyd 051c8d0b66 clk: qcom: Fix modular build
According to Documentation/kbuild/makefiles.txt these symbols
should be clk-qcom-y. Otherwise the build will fail if
CONFIG_COMMON_CLK_QCOM=m. Fix it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-17 13:39:42 -08:00
Stephen Boyd 0eeff27b49 clk: qcom: Add support for MSM8660's global clock controller (GCC)
Add a driver for the global clock controller found on MSM8660
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:05 -08:00
Stephen Boyd d8b212014e clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)
Add a driver for the global clock controller found on MSM 8974
based platforms. This should allow most multimedia device drivers
to probe and control their clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:05 -08:00
Stephen Boyd d33faa9ead clk: qcom: Add support for MSM8974's global clock controller (GCC)
Add a driver for the global clock controller found on MSM 8974
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:04 -08:00
Stephen Boyd 6d00b56fe8 clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)
Add a driver for the multimedia clock controller found on MSM
8960 based platforms. This should allow multimedia device drivers
to probe and control their clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:03 -08:00
Stephen Boyd 2ec941304d clk: qcom: Add support for MSM8960's global clock controller (GCC)
Add a driver for the global clock controller found on MSM8960
based platforms. This should allow most non-multimedia device
drivers to probe and control their clocks.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:02 -08:00
Stephen Boyd b36ba30c8a clk: qcom: Add reset controller support
Reset controllers and clock controllers are combined into one IP
block on Qualcomm chipsets. Usually a reset signal is associated
with each clock branch but sometimes a reset signal is associated
with a handful of clocks. Either way the register interface is
the same; set a bit to assert a reset and clear a bit to deassert
a reset. Add support for these types of resets signals.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:02 -08:00
Stephen Boyd 6e0ad1b6c1 clk: qcom: Add support for branches/gate clocks
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:01 -08:00
Stephen Boyd bcd61c0f53 clk: qcom: Add support for root clock generators (RCGs)
Add support for the root clock generators on Qualcomm devices.
RCGs are highly customizable mux/divider/counter clocks that can
be used to generate almost any rate desired given some input
source that is faster than the desired rate.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:01:00 -08:00
Stephen Boyd 9e2631313c clk: qcom: Add support for phase locked loops (PLLs)
Add support for Qualcomm's PLLs (phase locked loops). This is
sufficient enough to be able to determine the rate the PLL is
running at. We can add rate setting support later when it's
needed.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:00:59 -08:00
Stephen Boyd 085d7a4554 clk: qcom: Add a regmap type clock struct
Add a clock type that associates a regmap pointer and some
enable/disable bits with a clk_hw struct. This will be the struct
that a hw specific implementation wraps if it wants to use the
regmap helper functions.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-16 12:00:58 -08:00