Commit Graph

461 Commits

Author SHA1 Message Date
Stefan Richter 9499fe2b34 ieee1394: Kconfig menu touch-up
Rename and reorder some prompts and modify some help texts.
The result:

  -------------------- IEEE 1394 (FireWire) support --------------------
  *** Enable only one of the two stacks, unless you know what you are doing ***
  New FireWire stack, EXPERIMENTAL
    OHCI-1394 controllers
    Storage devices (SBP-2 protocol)
  Stable FireWire stack
    OHCI-1394 controllers
    PCILynx controller
    Storage devices (SBP-2 protocol)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    raw1394 userspace interface
    video1394 userspace interface
    dv1394 userspace interface (deprecated)
    Excessive debugging output

The old prompts for reference:

  -------------------- IEEE 1394 (FireWire) support --------------------
  IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL
    Support for OHCI FireWire host controllers
    Support for storage devices (SBP-2 protocol driver)
  IEEE 1394 (FireWire) support
    *** Subsystem Options ***
    Excessive debugging output
    *** Controllers ***
    Texas Instruments PCILynx support
    OHCI-1394 support
    *** Protocols ***
    OHCI-1394 Video support
    SBP-2 support (Harddisks etc.)
      Enable replacement for physical DMA in SBP2
    IP over 1394
    OHCI-DV I/O support (deprecated)
    Raw IEEE1394 I/O support

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-06-19 00:12:36 +02:00
Stefan Richter 93c596f7d6 ieee1394: sbp2: use correct size of command descriptor block
Boaz Harrosh wrote:
> cmd->cmd_len is now guarantied to be set properly at all cases.
> And some commands you want to support will not be set correctly
> by COMMAND_SIZE().

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-05-20 18:24:17 +02:00
Linus Torvalds 886c35fbcf Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: fw-sbp2: log scsi_target ID at release
  ieee1394: fix NULL pointer dereference in sysfs access
2008-05-01 11:31:38 -07:00
Stefan Richter 07c7224cf7 ieee1394: fix NULL pointer dereference in sysfs access
Regression since "ieee1394: prevent device binding of raw1394,
video1394, dv1394", commit d2ace29fa44589da51fedc06a67b3f05301f3bfd:
$ cat /sys/bus/ieee1394/drivers/raw1394/device_ids
triggers a NULL pointer dereference in fw_show_drv_device_ids.
Reported by Miles Lane.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Miles Lane <miles.lane@gmail.com>
2008-05-01 19:55:23 +02:00
Linus Torvalds 5f3b28781c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: silence defined but not used warning in non-modular builds
  ieee1394: rawiso: requeue packet for transmission after skipped cycle
2008-04-25 12:24:06 -07:00
Tony Breeds e38649702e ieee1394: silence defined but not used warning in non-modular builds
Currently the kernel will issue the following warning:
drivers/ieee1394/raw1394.c:2938: warning: 'raw1394_id_table' defined but not used
Add #ifdef MODULE guards around the declaration.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>

Ditto with dv1394_id_table and video1394_id_table.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25 18:15:45 +02:00
Pieter Palmers cc9429bcb6 ieee1394: rawiso: requeue packet for transmission after skipped cycle
As it seems, some host controllers have issues that can cause them to
skip cycles now and then when using large packets. I suspect that this
is due to DMA not succeeding in time. If the transmit fifo can't contain
more than one packet (big packets), the DMA should provide a new packet
each cycle (125us). I am under the impression that my current PCI
express test system can't guarantee this.

In any case, the patch tries to provide a workaround as follows:
The DMA program descriptors are modified such that when an error occurs,
the DMA engine retries the descriptor the next cycle instead of
stalling. This way no data is lost. The side effect of this is that
packets are sent with one cycle delay. This however might not be that
much of a problem for certain protocols (e.g. AM824). If they use
padding packets for e.g. rate matching they can drop one of those to
resync the streams.

The amount of skips between two userspace wakeups is counted. This
number is then propagated to userspace through the upper 16 bits of the
'dropped' parameter. This allows unmodified userspace applications due
to the following:
1) libraw simply passes this dropped parameter to the user application
2) the meaning of the dropped parameter is: if it's nonzero, something
bad has happened. The actual value of the parameter at this moment does
not have a specific meaning.

A libraw client can then retrieve the number of skipped cycles and
account for them if needed.

Signed-off-by: Pieter Palmers <pieterp@joow.be>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-25 18:15:45 +02:00
Matthew Wilcox 6188e10d38 Convert asm/semaphore.h users to linux/semaphore.h
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
2008-04-18 22:22:54 -04:00
Philippe De Muyter a6ca4f7081 ieee1394: limit early node speed to host interface speed
The following patch limits the node speed to the host interface speed,
before using it.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>

It should actually suffice to do this only for the local node's
speedcap[].  But there is another bug in the speed calculation:
The local node's speed is not correctly propagated to the speeds
which are to be used to access remote nodes.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/11772/focus=12024

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Robert P. J. Day ee2d91e2b3 ieee1394: Remove superfluous calls to kobject_set_name().
Unless you're adding a kobject to the sysfs hierarchy, there is no
point setting its kobject name.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter 9508c208aa ieee1394: ohci1394: missing PPC PMac feature calls in failure path
The failure path of ohci1394_pci_probe() reuses ohci1394_pci_remove().
Doing so it missed to call ohci1394_pmac_off() in a few unlikely early
error cases.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter c4e2e02bc9 ieee1394: ohci1394: refactor some printk format strings
to reduce the size of ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:31 +02:00
Stefan Richter d09c680383 ieee1394: ohci1394: unroll a macro with return
We don't want to hide something like return in a preprocessor macro.
Unroll the macro and use a goto, which also reduces the size of
ohci1394.ko.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Robert P. J. Day e351c4d069 ieee1394: Use shorter list_splice_init() for brevity.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Harvey Harrison b1ce1fd778 ieee1394: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter b25d166616 ieee1394: ohci1394: refactor probe, remove, suspend, resume
Clean up shared code and variable names.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter 38275ac36d ieee1394: ohci1394: switch on bus power after resume on PPC PMac
The platform feature calls in the suspend method switched off cable
power, but the calls in the resume method did not switch it back on.

Add the necessary feature call to .resume.  Also add the corresponding
call to .suspend to make .suspend's behavior explicitly the same on all
PMacs.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:30 +02:00
Stefan Richter d2ace29fa4 ieee1394: prevent device binding of raw1394, video1394, dv1394
These drivers don't need to match any unit_directory type device.
They just need the id_table for module autoloading per module alias.

Not binding any of these drivers allows special-purpose drivers with
similar or same IDs to bind to devices.  This currently only benefits
out-of-tree drivers; on the other hand it is in no way detrimental to
in-tree drivers.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:29 +02:00
Marcin Slusarz 63995d4650 ieee1394: be*_add_cpu conversion
replace all:
big_endian_variable = cpu_to_beX(beX_to_cpu(big_endian_variable) +
					expression_in_cpu_byteorder);
with:
	beX_add_cpu(&big_endian_variable, expression_in_cpu_byteorder);
generated with semantic patch

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:29 +02:00
Stefan Richter a4b47d62c5 ieee1394: sbp2: relax SCSI DMA alignment
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-04-18 17:55:29 +02:00
Stefan Richter 6e45ef4c7a ieee1394: sbp2: fix for SYM13FW500 bridge (Datafab disk)
Fix I/O errors due to SYM13FW500's inability to handle larger request
sizes.  Reported by Piergiorgio Sartor <piergiorgio.sartor@nexgo.de> for
firewire-sbp2 in https://bugzilla.redhat.com/show_bug.cgi?id=436879

This fix is necessary because sbp2's default request size limit has been
lifted since 2.6.25-rc1.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-03-14 00:56:59 +01:00
Stefan Richter ef774c16a7 ieee1394: sbp2: fix rescan-scsi-bus
rescan-scsi-bus used to add SBP-2 targets which weren't there.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-19 19:57:24 +01:00
Stefan Richter d94a983526 ieee1394: sbp2: add INQUIRY delay workaround
Add the same workaround as found in fw-sbp2 for feature parity and
compatibility of the workarounds module parameter.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Jarod Wilson <jwilson@redhat.com>
2008-02-16 15:40:34 +01:00
Stefan Richter 5fcf500058 ieee1394: sbp2: fix bogus s/g access change
sg_dma_len(sg) is invalid before the s/g list is DMA-mapped.

This fixes a post 2.6.24 regression which prevents access to SBP-2
devices on several architectures, introduced by "ieee1394: sbp2: s/g
list access cosmetics", commit 825f1df545.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-02-02 13:48:16 +01:00
Stefan Richter 85c5798b09 ieee1394: ohci1394: don't schedule IT tasklets on IR events
Bug noted by Pieter Palmers:  Isochronous transmit tasklets were
scheduled on isochronous receive events, in addition to the proper
isochronous receive tasklets.

http://marc.info/?l=linux1394-devel&m=119783196222802

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:21 +01:00
Stefan Richter 4e6343a10b ieee1394: sbp2: raise default transfer size limit
This patch speeds up sbp2 a little bit --- but more importantly, it
brings the behavior of sbp2 and fw-sbp2 closer to each other.  Like
fw-sbp2, sbp2 now does not limit the size of single transfers to 255
sectors anymore, unless told so by a blacklist flag or by module load
parameters.

Only very old bridge chips have been known to need the 255 sectors
limit, and we have got one such chip in our hardwired blacklist.  There
certainly is a danger that more bridges need that limit; but I prefer to
have this issue present in both fw-sbp2 and sbp2 rather than just one of
them.

An OXUF922 with 400GB 7200RPM disk on an S400 controller is sped up by
this patch from 22.9 to 23.5 MB/s according to hdparm.  The same effect
could be achieved before by setting a higher max_sectors module
parameter.  On buses which use 1394b beta mode, sbp2 and fw-sbp2 will
now achieve virtually the same bandwidth.  Fw-sbp2 only remains faster
on 1394a buses due to fw-core's gap count optimization.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:21 +01:00
Stefan Richter 3e75b493fb ieee1394: remove unused code
The code has been in "#if 0 - #endif" since Linux 2.6.12.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:20 +01:00
Stefan Richter c7ea990f87 ieee1394: small cleanup after "nopage"
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:20 +01:00
Nick Piggin 61db81214b ieee1394: nopage
Convert ieee1394 from nopage to fault.
Remove redundant vma range checks (correct resource range check is retained).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:19 +01:00
Joe Perches a5c52df8bc ieee1394: Add missing "space"
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:19 +01:00
Stefan Richter 825f1df545 ieee1394: sbp2: s/g list access cosmetics
Replace sg->length by sg_dma_len(sg).  Rename a variable for shorter
line lengths and eliminate some superfluous local variables.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:19 +01:00
Stefan Richter 8c4ac0949f ieee1394: sbp2: prepare for s/g chaining
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-01-30 22:22:18 +01:00
Bernhard Kaindl f212ec4b7b x86: early boot debugging via FireWire (ohci1394_dma=early)
This patch adds a new configuration option, which adds support for a new
early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch()
to decide wether OHCI-1394 FireWire controllers should be initialized and
enabled for physical DMA access to allow remote debugging of early problems
like issues ACPI or other subsystems which are executed very early.

If the config option is not enabled, no code is changed, and if the boot
paramenter is not given, no new code is executed, and independent of that,
all new code is freed after boot, so the config option can be even enabled
in standard, non-debug kernels.

With specialized tools, it is then possible to get debugging information
from machines which have no serial ports (notebooks) such as the printk
buffer contents, or any data which can be referenced from global pointers,
if it is stored below the 4GB limit and even memory dumps of of the physical
RAM region below the 4GB limit can be taken without any cooperation from the
CPU of the host, so the machine can be crashed early, it does not matter.

In the extreme, even kernel debuggers can be accessed in this way. I wrote
a small kgdb module and an accompanying gdb stub for FireWire which allows
to gdb to talk to kgdb using remote remory reads and writes over FireWire.

An version of the gdb stub fore FireWire is able to read all global data
from a system which is running a a normal kernel without any kernel debugger,
without any interruption or support of the system's CPU. That way, e.g. the
task struct and so on can be read and even manipulated when the physical DMA
access is granted.

A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt
and I've put a copy online at
ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt

It also has links to all the tools which are available to make use of it
another copy of it is online at:
ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff

Signed-Off-By: Bernhard Kaindl <bk@suse.de>
Tested-By: Thomas Renninger <trenn@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:34:11 +01:00
Linus Torvalds 9b73e76f3c Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits)
  [SCSI] usbstorage: use last_sector_bug flag universally
  [SCSI] libsas: abstract STP task status into a function
  [SCSI] ultrastor: clean up inline asm warnings
  [SCSI] aic7xxx: fix firmware build
  [SCSI] aacraid: fib context lock for management ioctls
  [SCSI] ch: remove forward declarations
  [SCSI] ch: fix device minor number management bug
  [SCSI] ch: handle class_device_create failure properly
  [SCSI] NCR5380: fix section mismatch
  [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices
  [SCSI] IB/iSER: add logical unit reset support
  [SCSI] don't use __GFP_DMA for sense buffers if not required
  [SCSI] use dynamically allocated sense buffer
  [SCSI] scsi.h: add macro for enclosure bit of inquiry data
  [SCSI] sd: add fix for devices with last sector access problems
  [SCSI] fix pcmcia compile problem
  [SCSI] aacraid: add Voodoo Lite class of cards.
  [SCSI] aacraid: add new driver features flags
  [SCSI] qla2xxx: Update version number to 8.02.00-k7.
  [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command.
  ...
2008-01-25 17:19:08 -08:00
Dave Young 73cf60232e ieee1394: use class iteration api
Convert to use the class iteration api.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:44 -08:00
James Bottomley 465ff3185e [SCSI] relax scsi dma alignment
This patch relaxes the default SCSI DMA alignment from 512 bytes to 4
bytes.  I remember from previous discussions that usb and firewire have
sector size alignment requirements, so I upped their alignments in the
respective slave allocs.

The reason for doing this is so that we don't get such a huge amount of
copy overhead in bio_copy_user() for udev.  (basically all inquiries it
issues can now be directly mapped).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 18:29:22 -06:00
Jens Axboe 9e66269d40 ieee1394: iso and async streams: s/g list fix
Torsten Kaiser wrote:
> Looking that calltrace upwards, it seems replacing the
> memset(dma->sglist,...) with sg_init_table(...) would fix the BUG_ON()
> as that inits the SG_MAGIC.

Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-11-04 14:31:16 +01:00
Adrian Bunk 87ae9afdca cleanup asm/scatterlist.h includes
Not architecture specific code should not #include <asm/scatterlist.h>.

This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-11-02 08:47:06 +01:00
Adrian Bunk 2ed45b07c9 ieee1394: ieee1394_transactions.c: remove dead code
This patch removes dead code spotted by the Intel C Compiler.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-31 19:02:19 +01:00
Jens Axboe 642f149031 SG: Change sg_set_page() to take length and offset argument
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.

Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-24 11:20:47 +02:00
Ralf Baechle 117636092a [PATCH] Fix breakage after SG cleanups
Commits

  58b053e4ce ("Update arch/ to use sg helpers")
  45711f1af6 ("[SG] Update drivers to use sg helpers")
  fa05f1286b ("Update net/ to use sg helpers")

converted many files to use the scatter gather helpers without ensuring
that the necessary headerfile <linux/scatterlist> is included.  This
happened to work for ia64, powerpc, sparc64 and x86 because they
happened to drag in that file via their <asm/dma-mapping.h>.

On most of the others this probably broke.

Instead of increasing the header file spider web I choose to include
<linux/scatterlist.h> directly into the affectes files.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-23 12:02:39 -07:00
Jens Axboe 45711f1af6 [SG] Update drivers to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:53 +02:00
Matthias Kaehlcke 002a98f147 ieee1394: ieee1394_core.c: use DEFINE_SPINLOCK for spinlock definition
drivers/ieee1394/ieee1394_core.c: Define spinlock using
DEFINE_SPINLOCK instead of assignment to SPIN_LOCK_UNLOCKED

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:59 +02:00
Stefan Richter 17a19b795e ieee1394: csr1212: proper refcounting
At least since nodemgr got rid of coarse global locking, accesses to
struct csr1212_keyval's reference counter should be atomic and coupled
with proper barriers.  Also, calls to csr1212_keep_keyval(kv) should
occur before kv is being used.

(We probably should convert refcnt to struct kref, but how to keep
csr1212_destroy_keyval's implementation non-recursively then?)

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:59 +02:00
Stefan Richter 638d5bb816 ieee1394: nodemgr: fix leak of struct csr1212_keyval
csr1212_keep_keyval(kv) in nodemgr_process_root_directory was
unbalanced if ne->vendor_name_kv already exists.  This happens for
example if eth1394 or raw1394 modify the local config ROM and it is
parsed again.

As a bonus, the attempt to add the vendor_name_kv sysfs attribute
when it already exists is now fixed for good.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:58 +02:00
Jean Delvare 745647e7a2 ieee1394: pcilynx: I2C cleanups
* Delete optional and empty i2c client_register and client_unregister
  callbacks.
* Use the proper i2c adapter ID.
* Don't use a template to initialize the i2c_adapter structure, it's
  inefficient.
* Update a misleading comment on why we use i2c_transfer rather than
  higher level i2c functions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:57 +02:00
Satyam Sharma 69e2b60296 ieee1394: Fix kthread stopping in nodemgr_host_thread
The nodemgr host thread can exit on its own even when kthread_should_stop
is not true, on receiving a signal (might never happen in practice, as
it ignores signals). But considering kthread_stop() must not be mixed with
kthreads that can exit on their own, I think changing the code like this
is clearer. This change means the thread can cut its sleep short when
receive a signal but looking at the code around, that sounds okay (and
again, it might never actually recieve a signal in practice).

Signed-off-by: Satyam Sharma <satyam@infradead.org>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:56 +02:00
Stefan Richter 261b5f664c ieee1394: sbp2: fix unsafe iteration over list of devices
sbp2_host_reset and sbp2_handle_status_write are not serialized against
sbp2_alloc_device and sbp2_remove_device.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:55 +02:00
Stefan Richter c4f3d41fed ieee1394: pcilynx: superfluous local variables
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:55 +02:00
Stefan Richter 661afcae1b ieee1394: eth1394: fix lock imbalance
bad_proto can be reached from points which did not take priv->lock.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2007-10-16 23:59:54 +02:00