Commit Graph

602496 Commits

Author SHA1 Message Date
Alexander Aring cc84b3c6b4 ipv6: export several functions
This patch exports some neighbour discovery functions which can be used
by 6lowpan neighbour discovery ops functionality then.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:23 -07:00
Alexander Aring f997c55c1d ipv6: introduce neighbour discovery ops
This patch introduces neighbour discovery ops callback structure. The
idea is to separate the handling for 6LoWPAN into the 6lowpan module.

These callback offers 6lowpan different handling, such as 802.15.4 short
address handling or RFC6775 (Neighbor Discovery Optimization for IPv6
over 6LoWPANs).

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:23 -07:00
Alexander Aring 4f672235cb addrconf: put prefix address add in an own function
This patch moves the functionality to add a RA PIO prefix generated
address in an own function. This move prepares to add a hook for
adding a second address for a second link-layer address. E.g. short
address for 802.15.4 6LoWPAN.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:23 -07:00
Alexander Aring 8ec5da4150 ndisc: add __ndisc_fill_addr_option function
This patch adds __ndisc_fill_addr_option as low-level function for
ndisc_fill_addr_option which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:23 -07:00
Alexander Aring 4f36ce84c5 ndisc: add __ndisc_opt_addr_data function
This patch adds __ndisc_opt_addr_data as low-level function for
ndisc_opt_addr_data which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:22 -07:00
Alexander Aring 1e82f961ac ndisc: add __ndisc_opt_addr_space function
This patch adds __ndisc_opt_addr_space as low-level function for
ndisc_opt_addr_space which doesn't depend on net_device parameter.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:22 -07:00
Alexander Aring 848484c931 6lowpan: remove ipv6 module request
Since we use exported function from ipv6 kernel module we don't need to
request the module anymore to have ipv6 functionality.

Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:22 -07:00
Alexander Aring 2ad3ed5919 6lowpan: add 802.15.4 short addr slaac
This patch adds the autoconfiguration if a valid 802.15.4 short address
is available for 802.15.4 6LoWPAN interfaces.

Cc: David S. Miller <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:22 -07:00
Alexander Aring 8626a0c83b 6lowpan: add private neighbour data
This patch will introduce a 6lowpan neighbour private data. Like the
interface private data we handle private data for generic 6lowpan and
for link-layer specific 6lowpan.

The current first use case if to save the short address for a 802.15.4
6lowpan neighbour.

Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Stefan Schmidt <stefan@osg.samsung.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 20:41:22 -07:00
David S. Miller 6010097806 Merge branch 'cxgb4-sriov-sysfs'
Hariprasad Shenai says:

====================
Add SRIOV configuration via sysfs and few fixes

This series adds support to configure SR-IOV via PCI sysfs interface,
reduces resource allocation in kdump kernel by disabling offload. Also
synchronize unicast and multicast mac address, even in the interface is in
Promiscuous mode.

This patch series has been created against net-next tree and includes
patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review
the change and let us know in case of any review comments.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:46:05 -07:00
Hariprasad Shenai d01f7abc91 cxgb4/cxgb4vf: Synchronize all MAC addresses
Even if interface is in Promiscuous mode/Allmulti mode synchronize
MAC addresses.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:46:05 -07:00
Hariprasad Shenai b6244201f4 cxgb4: Enable SR-IOV configuration via PCI sysfs interface
Implement callback in the driver for the new PCI bus driver
interface that allows the user to enable/disable SR-IOV
virtual functions in a device via the sysfs interface.

Deprecate module parameter used to configure SRIOV

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:46:04 -07:00
Hariprasad Shenai c5a8c0f3aa cxgb4: Force cxgb4 driver as MASTER in kdump kernel
When is_kdump_kernel() is true, Forcing cxgb4 driver as Master so we can
reinitialize the Firmware/Chip. Also reduce memory usage by disabling
offload.

Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:46:04 -07:00
David S. Miller 88da48f497 Merge branch 'sched_skb_free_defer'
Eric Dumazet says:

====================
net_sched: defer skb freeing while changing qdiscs

qdiscs/classes are changed under RTNL protection and often
while blocking BH and root qdisc spinlock.

When lots of skbs need to be dropped, we free
them under these locks causing TX/RX freezes,
and more generally latency spikes.

I saw spikes of 50+ ms on quite fast hardware...

This patch series adds a simple queue protected by RTNL
where skbs can be placed until RTNL is released.

Note that this might also serve in the future for optional
reinjection of packets when a qdisc is replaced.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:36 -07:00
Eric Dumazet fea024784f net_sched: sch_fq: defer skb freeing
sfq_reset() can use rtnl_kfree_skbs() instead of kfree_skb()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:36 -07:00
Eric Dumazet db4879d93c net_sched: sch_pie: defer skb freeing
pie_change() can use rtnl_qdisc_drop() to benefit from
deferred freeing.

pie_reset() is already using qdisc_reset_queue()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:36 -07:00
Eric Dumazet 2f08a9a162 net_sched: sch_netem: defer skb freeing
rtnl_kfree_skbs() can be used in tfifo_reset()

It would be nice if we could iterate through rb tree instead
of removing one skb at a time, and build a single skb chain.
But this is left for a future patch.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet a5a9f5346f net_sched: sch_htb: defer skb freeing
Both htb_reset() and htb_destroy() can use __qdisc_reset_queue()
instead of __skb_queue_purge() to defer skb freeing of internal
queues.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet e7e424cdc4 net_sched: sch_hhf: defer skb freeing
Both hhf_reset() and hhf_change() can use rtnl_kfree_skbs()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet ece5d4c723 net_sched: fq_codel: defer skb freeing
Both fq_codel_change() and fq_codel_reset() can use rtnl_kfree_skbs()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet e14ffdfdd6 net_sched: sch_fq: defer skb freeing
Both fq_change() and fq_reset() can use rtnl_kfree_skbs()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet b3d7e2b29b net_sched: sch_codel: defer skb freeing in codel_change()
codel_change() can use rtnl_qdisc_drop()
to defer expensive skb freeing after locks are released.

codel_reset() already has support for deferred skb freeing
because it uses qdisc_reset_queue()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:35 -07:00
Eric Dumazet f9aed311b6 net_sched: sch_choke: defer skb freeing
choke_reset() and choke_change() can use rtnl_qdisc_drop()
to defer expensive skb freeing after locks are released.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:34 -07:00
Eric Dumazet 1b5c5493e3 net_sched: add the ability to defer skb freeing
qdisc are changed under RTNL protection and often
while blocking BH and root qdisc spinlock.

When lots of skbs need to be dropped, we free
them under these locks causing TX/RX freezes,
and more generally latency spikes.

This commit adds rtnl_kfree_skbs(), used to queue
skbs for deferred freeing.

Actual freeing happens right after RTNL is released,
with appropriate scheduling points.

rtnl_qdisc_drop() can also be used in place
of disc_drop() when RTNL is held.

qdisc_reset_queue() and __qdisc_reset_queue() get
the new behavior, so standard qdiscs like pfifo, pfifo_fast...
have their ->reset() method automatically handled.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:08:34 -07:00
Jon Paul Maloy 35c55c9877 tipc: add neighbor monitoring framework
TIPC based clusters are by default set up with full-mesh link
connectivity between all nodes. Those links are expected to provide
a short failure detection time, by default set to 1500 ms. Because
of this, the background load for neighbor monitoring in an N-node
cluster increases with a factor N on each node, while the overall
monitoring traffic through the network infrastructure increases at
a ~(N * (N - 1)) rate. Experience has shown that such clusters don't
scale well beyond ~100 nodes unless we significantly increase failure
discovery tolerance.

This commit introduces a framework and an algorithm that drastically
reduces this background load, while basically maintaining the original
failure detection times across the whole cluster. Using this algorithm,
background load will now grow at a rate of ~(2 * sqrt(N)) per node, and
at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will
now have to actively monitor 38 neighbors in a 400-node cluster, instead
of as before 399.

This "Overlapping Ring Supervision Algorithm" is completely distributed
and employs no centralized or coordinated state. It goes as follows:

- Each node makes up a linearly ascending, circular list of all its N
  known neighbors, based on their TIPC node identity. This algorithm
  must be the same on all nodes.

- The node then selects the next M = sqrt(N) - 1 nodes downstream from
  itself in the list, and chooses to actively monitor those. This is
  called its "local monitoring domain".

- It creates a domain record describing the monitoring domain, and
  piggy-backs this in the data area of all neighbor monitoring messages
  (LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in
  the cluster eventually (default within 400 ms) will learn about
  its monitoring domain.

- Whenever a node discovers a change in its local domain, e.g., a node
  has been added or has gone down, it creates and sends out a new
  version of its node record to inform all neighbors about the change.

- A node receiving a domain record from anybody outside its local domain
  matches this against its own list (which may not look the same), and
  chooses to not actively monitor those members of the received domain
  record that are also present in its own list. Instead, it relies on
  indications from the direct monitoring nodes if an indirectly
  monitored node has gone up or down. If a node is indicated lost, the
  receiving node temporarily activates its own direct monitoring towards
  that node in order to confirm, or not, that it is actually gone.

- Since each node is actively monitoring sqrt(N) downstream neighbors,
  each node is also actively monitored by the same number of upstream
  neighbors. This means that all non-direct monitoring nodes normally
  will receive sqrt(N) indications that a node is gone.

- A major drawback with ring monitoring is how it handles failures that
  cause massive network partitionings. If both a lost node and all its
  direct monitoring neighbors are inside the lost partition, the nodes in
  the remaining partition will never receive indications about the loss.
  To overcome this, each node also chooses to actively monitor some
  nodes outside its local domain. Those nodes are called remote domain
  "heads", and are selected in such a way that no node in the cluster
  will be more than two direct monitoring hops away. Because of this,
  each node, apart from monitoring the member of its local domain, will
  also typically monitor sqrt(N) remote head nodes.

- As an optimization, local list status, domain status and domain
  records are marked with a generation number. This saves senders from
  unnecessarily conveying  unaltered domain records, and receivers from
  performing unneeded re-adaptations of their node monitoring list, such
  as re-assigning domain heads.

- As a measure of caution we have added the possibility to disable the
  new algorithm through configuration. We do this by keeping a threshold
  value for the cluster size; a cluster that grows beyond this value
  will switch from full-mesh to ring monitoring, and vice versa when
  it shrinks below the value. This means that if the threshold is set to
  a value larger than any anticipated cluster size (default size is 32)
  the new algorithm is effectively disabled. A patch set for altering the
  threshold value and for listing the table contents will follow shortly.

- This change is fully backwards compatible.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:06:28 -07:00
David Ahern 7889681f4a net: vrf: Update flags and features settings
1. Default VRF devices to not having a qdisc (IFF_NO_QUEUE). Users
   can add one as desired.

2. Disable adding a VLAN to a VRF device.

3. Enable offloads and hardware features similar to other logical
   devices (e.g., dummy, veth)

Change provides a significant boost in TCP stream Tx performance,
from ~2,700 Mbps to ~18,100 Mbps and makes throughput close to the
performance without a VRF (18,500 Mbps). netperf TCP_STREAM benchmark
using qemu with virtio+vhost for the NICs

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:03:48 -07:00
Paolo Abeni df10db98ab tun: fix csum generation for tap devices
The commit 3416609363 ("tuntap: use common code for virtio_net_hdr
and skb GSO conversion") replaced the tun code for header manipulation
with the generic helpers. While doing so, it implictly moved the
skb_partial_csum_set() invocation after eth_type_trans(), which
invalidate the current gso start/offset values.
Fix it by moving the helper invocation before the mac pulling.

Fixes: 3416609363 ("tuntap: use common code for virtio_net_hdr and skb GSO conversion")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 14:00:33 -07:00
David S. Miller 829e64d160 Merge branch 'skb_array'
Michael S. Tsirkin says:

====================
skb_array: array based FIFO for skbs

This is in response to the proposal by Jason to make tun
rx packet queue lockless using a circular buffer.
My testing seems to show that at least for the common usecase
in networking, which isn't lockless, circular buffer
with indices does not perform that well, because
each index access causes a cache line to bounce between
CPUs, and index access causes stalls due to the dependency.

By comparison, an array of pointers where NULL means invalid
and !NULL means valid, can be updated without messing up barriers
at all and does not have this issue.

On the flip side, cache pressure may be caused by using large queues.
tun has a queue of 1000 entries by default and that's 8K.
At this point I'm not sure this can be solved efficiently.
The correct solution might be sizing the queues appropriately.

Here's an implementation of this idea: it can be used more
or less whenever sk_buff_head can be used, except you need
to know the queue size in advance.

As this might be useful outside of networking, I implemented
a generic array of void pointers, with a type-safe wrapper for skbs.

It remains to be seen whether resizing is required, in case it is
I included patches implementing resizing by holding both the
consumer and the producer locks.

I think this code works fine without any extra memory barriers since we
always read and write the same location, so the accesses can not be
reordered.
Multiple writes of the same value into memory would mess things up
for us, I don't think compilers would do it though.
But if people feel it's better to be safe wrt compiler optimizations,
specifying queue as volatile would probably do it in a cleaner way
than converting all accesses to READ_ONCE/WRITE_ONCE. Thoughts?

The only issue is with calls within a loop using the __ptr_ring_XXX
accessors - in theory compiler could hoist accesses out of the loop.

Following volatile-considered-harmful.txt I merely
documented that callers that busy-poll should invoke cpu_relax().
Most people will use the external skb_array_XXX APIs with a spinlock,
so this should not be an issue for them.

Eric Dumazet suggested adding an extra pointer to skb for when
we have a single outstanding packet. I could not figure out
a way to implement this without a shared consumer/producer lock
though, which would cause cache line bounces by itself.

Jesper, Jason, I know that both of you tested this,
please post Tested-by tags for whatever was tested.

changes since v7
	fix typos noticed by Jesper Brouer

changes since v6
	resize implemented. peek/full calls are no longer lockless

	replaced _FIELD macros with _CALL which invoke a function
	on the pointer rather than just returning a value

	destroy now scans the array and frees all queued skbs

changes since v5
	implemented a generic ptr_ring api, and
		made skb_array a type-safe wrapper
	apis for taking the spinlock in different contexts
		following expected usecase in tun
changes since v4 (v3 was never posted)
	documentation
	dropped SKB_ARRAY_MIN_SIZE heuristic
	unit test (in userspace, included as patch 2)

changes since v2:
        fixed integer overflow pointed out by Eric.
        added some comments.

changes since v1:
        fixed bug pointed out by Eric.
====================

Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:34 -07:00
Michael S. Tsirkin 7d7072e3ba skb_array: resize support
Update skb_array after ptr_ring API changes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:27 -07:00
Michael S. Tsirkin 5d49de5320 ptr_ring: resize support
This adds ring resize support. Seems to be necessary as
users such as tun allow userspace control over queue size.

If resize is used, this costs us ability to peek at queue without
consumer lock - should not be a big deal as peek and consumer are
usually run on the same CPU.

If ring is made bigger, ring contents is preserved.  If ring is made
smaller, extra pointers are passed to an optional destructor callback.

Cleanup function also gains destructor callback such that
all pointers in queue can be cleaned up.

This changes some APIs but we don't have any users yet,
so it won't break bisect.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:27 -07:00
Michael S. Tsirkin ad69f35d1d skb_array: array based FIFO for skbs
A simple array based FIFO of pointers.  Intended for net stack so uses
skbs for type safety. Implemented as a set of wrappers around ptr_ring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:27 -07:00
Michael S. Tsirkin 9fb6bc5b4a ptr_ring: ring test
Add ringtest based unit test for ptr ring.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:58:27 -07:00
Michael S. Tsirkin 2e0ab8ca83 ptr_ring: array based FIFO for pointers
A simple array based FIFO of pointers.  Intended for net stack which
commonly has a single consumer/producer.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 13:57:21 -07:00
WANG Cong b2313077ed net_sched: make tcf_hash_check() boolean
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:43:35 -07:00
David S. Miller a6e225cad3 Merge branch 'vrf-ipv6-mcast-link-local'
David Ahern says:

====================
net: vrf: Handle ipv6 multicast and link-local addresses

IPv6 multicast and link-local addresses require special handling by the
VRF driver. Rather than using the VRF device index and full FIB lookups,
packets to/from these addresses should use direct FIB lookups based on
the VRF device table.

Multicast routes do not make sense for the L3 master device directly.
Accordingly, do not add mcast routes for the device, and the VRF driver
should fail attempts to send packets to ipv6 mcast addresses on the
device (e.g, ping6 ff02::1%<vrf> should fail)

With this change connections into and out of a VRF enslaved device work
for multicast and link-local addresses (icmp, tcp, and udp).  e.g.,

1. packets into VM with VRF config:
    ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1
    ping6 -c3 ff02::1%br1
    ssh -6 fe80::e0:f9ff:fe1c:b974%br1

2. packets going out a VRF enslaved device:
    ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1
    ping6 -c3 ff02::1%eth1
    ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:34:34 -07:00
David Ahern 9ff7438460 net: vrf: Handle ipv6 multicast and link-local addresses
IPv6 multicast and link-local addresses require special handling by the
VRF driver:
1. Rather than using the VRF device index and full FIB lookups,
   packets to/from these addresses should use direct FIB lookups based on
   the VRF device table.

2. fail sends/receives on a VRF device to/from a multicast address
   (e.g, make ping6 ff02::1%<vrf> fail)

3. move the setting of the flow oif to the first dst lookup and revert
   the change in icmpv6_echo_reply made in ca254490c8 ("net: Add VRF
   support to IPv6 stack"). Linklocal/mcast addresses require use of the
   skb->dev.

With this change connections into and out of a VRF enslaved device work
for multicast and link-local addresses work (icmp, tcp, and udp)
e.g.,

1. packets into VM with VRF config:
    ping6 -c3 fe80::e0:f9ff:fe1c:b974%br1
    ping6 -c3 ff02::1%br1

    ssh -6 fe80::e0:f9ff:fe1c:b974%br1

2. packets going out a VRF enslaved device:
    ping6 -c3 fe80::18f8:83ff:fe4b:7a2e%eth1
    ping6 -c3 ff02::1%eth1
    ssh -6 root@fe80::18f8:83ff:fe4b:7a2e%eth1

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:34:34 -07:00
David Ahern ba46ee4c0e net: ipv6: Do not add multicast route for l3 master devices
L3 master devices are virtual devices similar to the loopback
device. Link local and multicast routes for these devices do
not make sense. The ipv6 addrconf code already skips adding a
linklocal address; do the same for the mcast route.

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:34:34 -07:00
David Ahern cd2a9e62c8 net: l3mdev: Remove const from flowi6 arg to get_rt6_dst
Allow drivers to pass flow arg to functions where the arg is not const
and allow the driver to make updates as needed (eg., setting oif).

Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:34:34 -07:00
David S. Miller c9ad5a6568 Merge branch 'af_iucv-big-bufs'
Ursula Braun says:

====================
s390: af_iucv patches

here are improvements for af_iucv relaxing the pressure to allocate
big contiguous kernel buffers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:21:05 -07:00
Eugene Crosser a006353a9a af_iucv: use paged SKBs for big inbound messages
When an inbound message is bigger than a page, allocate a paged SKB,
and subsequently use IUCV receive primitive with IPBUFLST flag.
This relaxes the pressure to allocate big contiguous kernel buffers.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:21:05 -07:00
Eugene Crosser 291759a575 af_iucv: remove fragment_skb() to use paged SKBs
Before introducing paged skbs in the receive path, get rid of the
function `iucv_fragment_skb()` that replaces one large linear skb
with several smaller linear skbs.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:21:04 -07:00
Eugene Crosser e53743994e af_iucv: use paged SKBs for big outbound messages
When an outbound message is bigger than a page, allocate and fill
a paged SKB, and subsequently use IUCV send primitive with IPBUFLST
flag. This relaxes the pressure to allocate big contiguous kernel
buffers.

Signed-off-by: Eugene Crosser <Eugene.Crosser@ru.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:21:04 -07:00
Alexander Shiyan 818d49ad16 dt: bindings: Add bindings for Cirrus Logic CS89x0 ethernet chip
Add device tree binding documentation details for Cirrus Logic
CS8900/CS8920 ethernet chip.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:17:57 -07:00
Alexander Shiyan d3cf8fd3fc net: cx89x0: Add DT support
Add DT support to the Cirrus Logic CS89x0 driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 12:17:57 -07:00
WANG Cong d9fa17ef9f act_police: rename tcf_act_police_locate() to tcf_act_police_init()
This function is just ->init(), rename it to make it obvious.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 00:05:57 -07:00
WANG Cong 95df1b1607 net_sched: remove internal use of TC_POLICE_*
These should be gone when we removed CONFIG_NET_CLS_POLICE.
We can not totally remove them since they are exposed
to userspace.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15 00:05:57 -07:00
David S. Miller 161cd45ff0 Merge branch 'rds-mprds-foundations'
Sowmini Varadhan says:

====================
RDS: multiple connection paths for scaling

Today RDS-over-TCP is implemented by demux-ing multiple PF_RDS sockets
between any 2 endpoints (where endpoint == [IP address, port]) over a
single TCP socket between the 2 IP addresses involved. This has the
limitation that it ends up funneling multiple RDS flows over a single
TCP flow, thus the rds/tcp connection is
   (a) upper-bounded to the single-flow bandwidth,
   (b) suffers from head-of-line blocking for the RDS sockets.

Better throughput (for a fixed small packet size, MTU) can be achieved
by having multiple TCP/IP flows per rds/tcp connection, i.e., multipathed
RDS (mprds).  Each such TCP/IP flow constitutes a path for the rds/tcp
connection. RDS sockets will be attached to a path based on some hash
(e.g., of local address and RDS port number) and packets for that RDS
socket will be sent over the attached path using TCP to segment/reassemble
RDS datagrams on that path.

The table below, generated using a prototype that implements mprds,
shows that this is significant for scaling to 40G.  Packet sizes
used were: 8K byte req, 256 byte resp. MTU: 1500.  The parameters for
RDS-concurrency used below are described in the rds-stress(1) man page-
the number listed is proportional to the number of threads at which max
throughput was attained.

  -------------------------------------------------------------------
     RDS-concurrency   Num of       tx+rx K/s (iops)       throughput
     (-t N -d N)       TCP paths
  -------------------------------------------------------------------
        16             1             600K -  700K            4 Gbps
        28             8            5000K - 6000K           32 Gbps
  -------------------------------------------------------------------

FAQ: what is the relation between mprds and mptcp?
  mprds is orthogonal to mptcp. Whereas mptcp creates
  sub-flows for a single TCP connection, mprds parallelizes tx/rx
  at the RDS layer. MPRDS with N paths will allow N datagrams to
  be sent in parallel; each path will continue to send one
  datagram at a time, with sender and receiver keeping track of
  the retransmit and dgram-assembly state based on the RDS header.
  If desired, mptcp can additionally be used to speed up each TCP
  path. That acceleration is orthogonal to the parallelization benefits
  of mprds.

This patch series lays down the foundational data-structures to support
mprds in the kernel. It implements the changes to split up the
rds_connection structure into a common (to all paths) part,
and a per-path rds_conn_path. All I/O workqs are driven from
the rds_conn_path.

Note that this patchset does not (yet) actually enable multipathing
for any of the transports; all transports will continue to use a
single path with the refactored data-structures. A subsequent patchset
will  add the changes to the rds-tcp module to actually use mprds
in rds-tcp.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 23:50:44 -07:00
Sowmini Varadhan 3ecc5693c0 RDS: Update rds_conn_destroy to be MP capable
Refactor rds_conn_destroy() so that the per-path dismantling
is done in rds_conn_path_destroy, and then iterate as needed
over rds_conn_path_destroy().

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 23:50:44 -07:00
Sowmini Varadhan d769ef81d5 RDS: Update rds_conn_shutdown to work with rds_conn_path
This commit changes rds_conn_shutdown to take a rds_conn_path *
argument, allowing it to shutdown paths other than c_path[0] for
MP-capable transports.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 23:50:44 -07:00
Sowmini Varadhan 1c5113cf79 RDS: Initialize all RDS_MPATH_WORKERS in __rds_conn_create
Add a for() loop in __rds_conn_create to initialize all the
conn_paths, in preparate for MP capable transports.

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-14 23:50:44 -07:00