Commit Graph

274 Commits

Author SHA1 Message Date
Rafael J. Wysocki 3a2d5b7001 PM: Introduce PM_EVENT_HIBERNATE callback state
During the last step of hibernation in the "platform" mode (with the
help of ACPI) we use the suspend code, including the devices'
->suspend() methods, to prepare the system for entering the ACPI S4
system sleep state.

But at least for some devices the operations performed by the
->suspend() callback in that case must be different from its operations
during regular suspend.

For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and
pass it to the device drivers' ->suspend() methods during the last phase
of hibernation, so that they can distinguish this case and handle it as
appropriate.  Modify the drivers that handle PM_EVENT_SUSPEND in a
special way and need to handle PM_EVENT_HIBERNATE in the same way.

These changes are necessary to fix a hibernation regression related
to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 10:40:04 -08:00
Tony Breeds 2ebda63b09 Fix compile of swim3 as module
The current pmac32_defconfig fails to build with the following error:

  Building modules, stage 2.
ERROR: "check_media_bay" [drivers/block/swim3.ko] undefined!
WARNING: modpost: Found 23 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
make[2]: *** [__modpost] Error 1

This patch fixes that.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 20:58:04 -08:00
Benjamin Herrenschmidt 592a607bbc [POWERPC] Disable G5 NAP mode during SMU commands on U3
It appears that with the U3 northbridge, if the processor is in NAP
mode the whole time while waiting for an SMU command to complete,
then the SMU will fail.  It could be related to the weird backward
mechanism the SMU uses to get to system memory via i2c to the
northbridge that doesn't operate properly when the said bridge is
in napping along with the CPU.  That is on U3 at least, U4 doesn't
seem to be affected.

This didn't show before NO_HZ as the timer wakeup was enough to make
it work it seems, but that is no longer the case.

This fixes it by disabling NAP mode on those machines while
an SMU command is in flight.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-08 19:52:35 +11:00
Bartlomiej Zolnierkiewicz 34394e45c3 ppc: fix #ifdef-s in mediabay driver (take 2)
* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef in
  check_media_bay() by CONFIG_MAC_FLOPPY one.

* Replace incorrect CONFIG_BLK_DEV_IDE #ifdef-s by
  CONFIG_BLK_DEV_IDE_PMAC ones.

* check_media_bay() is used only by drivers/block/swim3.c
  so make this function available only if CONFIG_MAC_FLOPPY
  is defined.

* check_media_bay_by_base() and media_bay_set_ide_infos()
  are used only by drivers/ide/ppc/pmac.c so so make these
  functions available only if CONFIG_MAC_FLOPPY is defined.

v2:
* Remove ifdefs from function prototypes. (Andrew Morton)

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06 02:57:50 +01:00
Finn Thain eb4da4cec3 mac68k: macii adb comment correction
Corrects a mistake I made in a comment.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:24 -08:00
Linus Torvalds f5bb3a5e9d Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits)
  Jesper Juhl is the new trivial patches maintainer
  Documentation: mention email-clients.txt in SubmittingPatches
  fs/binfmt_elf.c: spello fix
  do_invalidatepage() comment typo fix
  Documentation/filesystems/porting fixes
  typo fixes in net/core/net_namespace.c
  typo fix in net/rfkill/rfkill.c
  typo fixes in net/sctp/sm_statefuns.c
  lib/: Spelling fixes
  kernel/: Spelling fixes
  include/scsi/: Spelling fixes
  include/linux/: Spelling fixes
  include/asm-m68knommu/: Spelling fixes
  include/asm-frv/: Spelling fixes
  fs/: Spelling fixes
  drivers/watchdog/: Spelling fixes
  drivers/video/: Spelling fixes
  drivers/ssb/: Spelling fixes
  drivers/serial/: Spelling fixes
  drivers/scsi/: Spelling fixes
  ...
2008-02-04 07:58:52 -08:00
Geert Uytterhoeven fe2528b96b ADB: Add missing #include <linux/platform_device.h>
Commit c9f6d3d5c6 ("[POWERPC] adb: Replace
sleep notifier with platform driver suspend/resume hooks") introduced
compile errors on m68k because <linux/platform_device.h> is not
explicitly included.  On powerpc, it's pulled in through <asm/prom.h>.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 07:51:23 -08:00
Joe Perches f18816ba20 drivers/macintosh/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:18:02 +02:00
Paulius Zaleckas efad798b9f Spelling fixes: lenght->length
Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:42:53 +02:00
Bartlomiej Zolnierkiewicz f82c2b1719 ide: add 'init_default' and 'restore' arguments to ide_unregister()
* Add 'init_default' (flag for calling init_hwif_default()) and 'restore'
  (flag for calling ide_hwif_restore()) arguments to ide_unregister().

* Update ide_unregister() users to set 'init_default' and 'restore' flags.

* No need to set 'init_default' flag in ide_register_hw() if the setup done
  by init_hwif_default() is going to be overridden by ide_init_port_hw().

* No need to set 'init_default' and 'restore' flags in cleanup_module().

There should be no functionality changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-02 19:56:39 +01:00
Paul Mackerras bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Jean Delvare 05c7abaeb3 i2c: Kill rogue driver IDs
I2C driver IDs are optional, so if you don't need one, just omit it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:47 +01:00
Jean Delvare 2cdddeb8d7 i2c: normal_i2c can be made const (remaining drivers)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-01-27 18:14:47 +01:00
Bartlomiej Zolnierkiewicz cbb010c180 ide: drop 'initializing' argument from ide_register_hw()
* Rename init_hwif_data() to ide_init_port_data() and export it.

* For all users of ide_register_hw() with 'initializing' argument set
  hwif->present and hwif->hold are always zero so convert these host
  drivers to use ide_find_port()+ide_init_port_data()+ide_init_port_hw()
  instead (also no need for init_hwif_default() call since the setup
  done by it gets over-ridden by ide_init_port_hw() call).

* Drop 'initializing' argument from ide_register_hw().

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-01-26 20:13:06 +01:00
Kay Sievers af5ca3f4ec Driver core: change sysdev classes to use dynamic kobject names
All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:40 -08:00
Tony Jones 68db2bc98c adb: Convert from class_device to device
struct class_device is going away, this converts the code to use struct
device instead.

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: Joshua Thompson <funaho@jurai.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:05 -08:00
Paul Mackerras 9156ad4833 Merge branch 'linux-2.6' 2008-01-24 10:07:21 +11:00
Stephen Rothwell 10804f0fb8 [POWERPC] therm_adt746x: Eliminate some build warnings
We don't care if the device_create_file calls fail, the driver will work
just as well without them, so just issue a runtime warning.

drivers/macintosh/therm_adt746x.c: In function 'thermostat_init':
drivers/macintosh/therm_adt746x.c:615: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:616: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:617: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:618: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:619: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:620: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:621: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:622: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:623: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_adt746x.c:625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:31 +11:00
Stephen Rothwell 98894dffaf [POWERPC] therm_windtunnel: Eliminate some build warnings
We don't care if the device_create_file calls fail, the driver will work
just as well without them, so just issue a runtime warning.

drivers/macintosh/therm_windtunnel.c: In function 'setup_hardware':
drivers/macintosh/therm_windtunnel.c:268: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_windtunnel.c:269: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:27 +11:00
Stephen Rothwell 97759e494e [POWERPC] therm_pm72: Suppress some compile warnings
We don't really care if any of these calls to device_create_file fails,
so just issue warnings in that case.

drivers/macintosh/therm_pm72.c: In function 'init_cpu_state':
drivers/macintosh/therm_pm72.c:1185: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1186: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1187: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1188: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1189: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1191: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1192: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1193: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1194: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1195: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_backside_state':
drivers/macintosh/therm_pm72.c:1383: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1384: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_drives_state':
drivers/macintosh/therm_pm72.c:1503: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1504: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_dimms_state':
drivers/macintosh/therm_pm72.c:1625: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c: In function 'init_slots_state':
drivers/macintosh/therm_pm72.c:1743: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result
drivers/macintosh/therm_pm72.c:1744: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:12 +11:00
Andy Wingo 9f31c05ea0 macintosh: fix fabrication of caplock key events
If the user has turned on the "restore_caplock_events" parameter, the
code mangles the capslock events correctly, then erroneously ignores
those events.  Fix logic to allow correct fallthrough.

Signed-off-by: Andy Wingo <wingo@pobox.com>
Acked-by: Andrew McNabb <amcnabb@mcnabbs.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-14 08:52:22 -08:00
Benjamin Herrenschmidt 0094f2cdcf [POWERPC] Fix for via-pmu based backlight control
This fixes a few issues with via-pmu based backlight control.

First, it fixes a sign problem with the setup of the backlight
curve since the `range' value there -can- (and will) go negative.

Then, it reworks the interaction between this and the via-pmu sleep
code to properly restore backlight on wakeup from sleep.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:14:07 +11:00
Scott Wood 7ac5dde99e [POWERPC] Implement arch disable/enable irq hooks.
These hooks ensure that a decrementer interrupt is not pending when
suspending; otherwise, problems may occur on 6xx/7xx/7xxx-based
systems (except for powermacs, which use a separate suspend path).
For example, with deep sleep on the 831x, a pending decrementer will
cause a system freeze because the SoC thinks the decrementer interrupt
would have woken the system, but the core must have interrupts
disabled due to the setup required for deep sleep.

Changed via-pmu.c to use the new ppc_md hooks, and made the arch_*
functions call the generic_* functions unconditionally.  -- paulus

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-21 22:13:35 +11:00
Johannes Berg f91266edba [POWERPC] powermac: Use generic suspend code
This adds platform_suspend_ops for PMU based machines, directly in
the PMU driver.  This allows suspending via /sys/power/state
on powerbooks.

The patch also replaces the PMU ioctl with a simple call to
pm_suspend(PM_SUSPEND_MEM).

Additionally, it cleans up some debug code.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 23:02:35 +11:00
Paul Mackerras 887ef35ae4 [POWERPC] Fix sleep on powerbook 3400
Sleep on the powerbook 3400 has been broken since the change that made
powerbook_sleep_3400 call pmac_suspend_devices(), which disables
interrupts.  There are a couple of loops in powerbook_sleep_3400 that
depend on interrupts being enabled, and in fact it has to have
interrupts enabled at the point of going to sleep since it is an
interrupt from the PMU that wakes it up.

This fixes it by using pmu_wait_complete() instead of a spinloop, and
by explicitly enabling interrupts before putting the CPU into sleep
mode (which is OK since all interrupts except the PMU interrupt have
been disabled at the interrupt controller by this stage).

This changes the logic so that it keeps putting the CPU into sleep mode
until the completion of the interrupt transaction from the PMU that
signals the end of sleep.  Also, we now call pmu_unlock() before sleep
so that the via_pmu_interrupt() code can process the interrupt event
from the PMU properly.

Now that generic code saves and restores PCI state, it is no longer
necessary to do that here.  Thus pbook_pci_save/restore and related
functions are no longer necessary, so this removes them.

Lastly, this moves the ioremap of the memory controller to init code
rather than doing it on every sleep/wakeup cycle.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 22:45:31 +11:00
Paul Mackerras 98f6740ea6 [POWERPC] Convert therm_windtunnel.c to use the kthread API
This is fairly straightforward, and lets us get rid of x.completion
as well.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:22:02 +11:00
Paul Mackerras 39d183d877 [POWERPC] Convert therm_pm72.c to use the kthread API
This converts the therm_pm72.c driver to use the kthread API.  I
thought about making it use kthread_stop() instead of the `state'
variable and the `ctrl_complete' completion, but that isn't simple and
will require changing the way that `state' is used.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:22:02 +11:00
Paul Mackerras c61dace9a1 [POWERPC] Convert adb.c to use kthread API and not spin on ADB requests
This converts adb.c to use the kthread API.

It also changes adb_request so that if the ADBREQ_SYNC flag is
specified, we now sleep waiting for the request to finish using an
on-stack completion rather than spinning.  To implement this, we now
require that if the ADBREQ_SYNC flag is set, the `done' parameter must
be NULL.  All of the existing callers of adb_request that pass
ADBREQ_SYNC appear to be in process context and have done == NULL.
Doing this allows us to get rid of an awful hack in adb_request()
where we used to test whether the request was coming from the adb
probe task and use a completion if it was, and otherwise spin.

This also gets rid of a static request block that was used if the req
parameter to adb_request was NULL.  None of the callers do that any
more, so the static request block is no longer necessary.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:22:02 +11:00
Paul Mackerras 33f6e79406 [POWERPC] Convert media-bay.c to use the kthread API
We aren't supposed to use kernel_thread directly in drivers any more,
and in fact using kthread_run is a bit simpler.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:22:02 +11:00
Johannes Berg b819a9bfc7 [POWERPC] via-pmu: Kill sleep notifiers completely
This kills off the remnants of the old sleep notifiers now that they
are no longer used.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:00:59 +11:00
Johannes Berg c9f6d3d5c6 [POWERPC] adb: Replace sleep notifier with platform driver suspend/resume hooks
This replaces the pmu sleep notifier that adb had with suspend/resume
hooks in a new platform driver/device.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-19 15:00:29 +11:00
Julia Lawall 771cceb464 drivers/macintosh/via-pmu.c: Added a missing iounmap
The error handling code should undo the ioremap as well.

The problem was detected using the following semantic match
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T,T1,T2;
identifier E;
statement S;
expression x1,x2;
constant C;
int ret;
@@

  T E;
  ...
* E = ioremap(...);
  if (E == NULL) S
  ... when != iounmap(E)
      when != if (E != NULL) { ... iounmap(E); ...}
      when != x1 = (T1)E
  if (...) {
    ... when != iounmap(E)
        when != if (E != NULL) { ... iounmap(E); ...}
        when != x2 = (T2)E
(
*   return;
|
*   return C;
|
*   return ret;
)
  }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Olaf Hering <olaf@aepfle.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-12-17 19:28:16 -08:00
Johannes Berg 1b0e9d44ee [POWERPC] PMU: Remove dead code
Some code in via-pmu.c is never compiled because of "compile options"
within the file.  Remove the code completely.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:26 +11:00
Johannes Berg 9ee7fd9c60 [POWERPC] PMU: Don't lock_kernel()
I see nothing that this lock_kernel() actually protects against,
so remove it.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-03 13:56:26 +11:00
Johannes Berg 67b60518b0 [POWERPC] windfarm: Fix windfarm thread freezer interaction
When I fixed the windfarm freezer interaction first in commit
1ed2ddf380, an earlier patch than the one
I came up with after comments was committed. This has come back to haunt
us now because commit d5d8c5976d changed
the freezer to no long send signals. Fix it by removing the windfarm
thread's signal logic and restoring the original try_to_freeze().

We could simply revert 1ed2ddf380 now
but I feel that the assertion that no signal is delivered to the
windfarm thread needs not be there.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-11-08 14:15:34 +11:00
Linus Torvalds c00046c279 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits)
  fix do_sys_open() prototype
  sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake
  Documentation: Fix typo in SubmitChecklist.
  Typo: depricated -> deprecated
  Add missing profile=kvm option to Documentation/kernel-parameters.txt
  fix typo about TBI in e1000 comment
  proc.txt: Add /proc/stat field
  small documentation fixes
  Fix compiler warning in smount example program from sharedsubtree.txt
  docs/sysfs: add missing word to sysfs attribute explanation
  documentation/ext3: grammar fixes
  Documentation/java.txt: typo and grammar fixes
  Documentation/filesystems/vfs.txt: typo fix
  include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros
  trivial copy_data_pages() tidy up
  Fix typo in arch/x86/kernel/tsc_32.c
  file link fix for Pegasus USB net driver help
  remove unused return within void return function
  Typo fixes retrun -> return
  x86 hpet.h: remove broken links
  ...
2007-10-19 20:36:17 -07:00
Bartlomiej Zolnierkiewicz fd9bb53942 ide: add ->fixup method to ide_hwif_t
* Add ->fixup method to ide_hwif_t.

* Set hwif->fixup in ide_pci_setup_ports() to d->fixup.

* Use hwif->fixup in probe_hwif().

* Use probe_hwif_init() instead of probe_hwif_init_with_fixup() in
  ide_setup_pci_device().

* Add 'fixup' argument to ide_register_hw() and use it to set hwif->fixup,
  update all ide_register_hw() users accordingly.

* Convert ide-cs/delkin_cb host drivers to use ide_register_hw().

* Restore hwif->fixup in ide_hwif_restore().

* Remove ide_register_hw_with_fixup(), probe_hwif_init_with_fixup()
  and 'fixup' argument from probe_hwif().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-20 00:32:31 +02:00
Jean Delvare c03983ac9b Spelling fix: explicitly
From: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19 23:22:55 +02:00
Jiri Slaby 7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00
Al Viro 68f3e6622b fix adbhid mismerge
This fixes a lost 'key' variable declaration that went missing in a
mismerge (commit b981d8b3f5)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16 19:04:49 -07:00
Dmitry Torokhov b981d8b3f5 Merge master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	drivers/macintosh/adbhid.c
2007-10-12 21:27:47 -04:00
Andrew McNabb 9a402b649d Input: adbhid - produce all CapsLock key events
The ADB keyboard, which is used for Apple PowerBooks, has strange behavior
with regard to the capslock key.  It keeps track of capslock state
internally, and it sends a keycode when capslock is engaged and a keycode
when capslock is disengaged.

When the current adbhid driver sees that the capslock key is pressed or
released, it creates both a keypress event and a keyrelease event
simultaneously.  This results in normal capslock behavior.

While this works, it makes it impossible to remap the capslock key to be a
control key.  However, by translating the 0xff keycode into capslock
keycodes, we can restore the missing capslock events and make it possible
to remap the capslock key.

With this patch, the adbhid driver will translate these 0xff keycodes into
capslock keypresses and keyreleases if
/sys/module/adbhid/parameters/restore_capslock_events is set to 1.
Otherwise it will retain the current behavior.  This option is off by
default because occasionally the 0xff keycode is not a capslock event, and
a mistake may require the user to tap the capslock key.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Andrew McNabb <amcnabb@mcnabbs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-10-11 00:49:43 -04:00
Andreas Herrmann 8d9f0952e7 Input: auto-select INPUT for MAC_EMUMOUSEBTN option
Otherwise we'll ge the following build error:

  LD      .tmp_vmlinux1
drivers/built-in.o: In function `input_report_key':
include/linux/input.h:1158: undefined reference to `input_event'
    ...

Signed-off-by: Andreas Herrmann <aherrman@arcor.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-09-26 00:01:50 -04:00
Aristeu Rozanski 555ddbb4e2 [POWERPC] adbhid: Enable KEY_FN key reporting
When a Fn key is used in combination with another key in ADB keyboards
it will generate a Fn event and then a second event that can be a
different key than pressed (Fn + F1 for instance can generate Fn +
brightness down if it's configured like that).  This enables the
reporting of the Fn key to the input system.

As Fn is a dead key for most purposes, it's useful to report it so
applications can make use of it.  One example is apple_mouse
(https://jake.ruivo.org/uinputd/trunk/apple_mouse/) that emulates the
second and third keys using a combination of keyboard keys and the mouse
button.  Other applications may use the KEY_FN as a modifier as well.
I've been updating and using this patch for months without problems.

Signed-off-by: Aristeu Rozanski <aris@ruivo.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Paul Mackerras 35438c4327 Merge branch 'linux-2.6' into for-2.6.24 2007-08-28 15:56:11 +10:00
Olaf Hering e120e8d03a [POWERPC] Fix undefined reference to device_power_up/resume
Current Linus tree fails to link on pmac32:

drivers/built-in.o: In function `pmac_wakeup_devices':
via-pmu.c:(.text+0x5bab4): undefined reference to `device_power_up'
via-pmu.c:(.text+0x5bb08): undefined reference to `device_resume'
drivers/built-in.o: In function `pmac_suspend_devices':
via-pmu.c:(.text+0x5c260): undefined reference to `device_power_down'
via-pmu.c:(.text+0x5c27c): undefined reference to `device_resume'
make[1]: *** [.tmp_vmlinux1] Error 1

changing CONFIG_PM > CONFIG_PM_SLEEP leads to:

drivers/built-in.o: In function `pmu_led_set':
via-pmu-led.c:(.text+0x5cdca): undefined reference to `pmu_sys_suspended'
via-pmu-led.c:(.text+0x5cdce): undefined reference to `pmu_sys_suspended'
drivers/built-in.o: In function `pmu_req_done':
via-pmu-led.c:(.text+0x5ce3e): undefined reference to `pmu_sys_suspended'
via-pmu-led.c:(.text+0x5ce42): undefined reference to `pmu_sys_suspended'
drivers/built-in.o: In function `adb_init':
(.init.text+0x4c5c): undefined reference to `pmu_register_sleep_notifier'
make[1]: *** [.tmp_vmlinux1] Error 1

So change even more places from PM to PM_SLEEP to allow linking.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-25 16:58:27 +10:00
Kumar Gala 33d71d26ba [POWERPC] Copy over headers from arch/ppc to arch/powerpc that we need
To build arch/powerpc without including asm-ppc/ we need these files
in asm-powerpc/

Moved some headers under arch/powerpc/platforms if they were only used by
platform or driver files and fixed up the source file includes to match
the new locations

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:43:29 -05:00
Kumar Gala ed16c20da6 [POWERPC] Remove old includes from arch/ppc
Remove includes of files that existed in arch/ppc that we dont need in
arch/powerpc anymore.  The following includes were removed:

 <asm/amigappc.h>
 <asm/bootinfo.h>
 <asm/ppcboot.h>
 <asm/ppc_sys.h>
 <asm/residual.h>
 <asm/m8260_pci.h>

This also caused platforms/embedded6xx/mpc7448_hpc2.h to no longer be
needed and thus removed.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-08-22 22:39:35 -05:00
Geert Uytterhoeven 2301060e2b m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible
m68k/mac: Make mac_hid_mouse_emulate_buttons() declaration visible

drivers/char/keyboard.c: In function 'kbd_keycode':
drivers/char/keyboard.c:1142: error: implicit declaration of function 'mac_hid_mouse_emulate_buttons'

The forward declaration of mac_hid_mouse_emulate_buttons() is not visible on
m68k because it's hidden in the middle of a big #ifdef block.

Move it to <linux/kbd_kern.h>, correct the type of the second parameter, and
include <linux/kbd_kern.h> where needed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00
Johannes Berg 0d5e74fc7f remove dead code in via-pmu68k
When suspend is ever implemented for pmu68k it really should follow the
generic pm_ops concept and not mirror the platform-specific /dev/pmu
device with ioctls on it. Hence, this patch removes the unused code there;
should the implementers need it they can look at via-pmu.c and/or the
history of the file.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:45 -07:00