Commit Graph

10 Commits

Author SHA1 Message Date
Anson Huang d0f9d64a0b Thermal: imx: correct critical trip temperature setting
On latest i.MX6 SOC with thermal calibration data of 0x5A100000,
the critical trip temperature will be an invalid value and
cause system auto shutdown as below log:

thermal thermal_zone0: critical temperature reached(42 C),shutting down

So, with universal formula for thermal sensor, only room
temperature point is calibrated, which means the calibration
data read from fuse only has valid data of bit [31:20], others
are all 0, the critical trip point temperature can NOT depend
on the hot point calibration data, here we set it to 20 C higher
than default passive temperature.

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-07-01 09:22:28 +08:00
Anson Huang 749e8be71d thermal: imx: update formula for thermal sensor
Thermal sensor used to need two calibration points which are
in fuse map to get a slope for converting thermal sensor's raw
data to real temperature in degree C. Due to the chip calibration
limitation, hardware team provides an universal formula to get
real temperature from internal thermal sensor raw data:

Slope = 0.4297157 - (0.0015976 * 25C fuse);

Update the formula, as there will be no hot point calibration
data in fuse map from now on.

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-04-08 09:01:37 +08:00
Zhang Rui c698a4492f Merge branch 'misc' of .git into next 2014-01-06 22:48:19 +08:00
Eduardo Valentin cbb07bb35d thermal: remove const flag from .ops of imx thermal
As per previous changes on thermal framework API,
registering a new thermal zone does not require
a const thermal zone ops.

Thus, this patch removes the flag from imx thermal zone ops.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-06 22:48:03 +08:00
Anson Huang 329fe7b14d thermal: imx: add necessary clk operation
Thermal sensor needs pll3_usb_otg when measuring temperature,
otherwise the temperature read will be incorrect, so need to
enable this clk before sensor working, for alarm function,
as hardware will take measurement periodically, so we should
keep this clk always on once alarm function is enabled.

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-03 22:49:16 +08:00
Russell King dd2686324c thermal: imx_thermal: add module device table
Add the module device table declaration so the module can be loaded
automatically at boot time.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-02 10:36:12 +08:00
Anson Huang b46cce5902 thermal: imx: correct suspend/resume flow
Fixes regression introduced by:

commit 37713a1e8e
Author: Philipp Zabel <p.zabel@pengutronix.de>
Date:   Thu Aug 1 18:33:12 2013 +0200

    thermal: imx: implement thermal alarm interrupt handling

The commit 37713a1e8e makes imx thermal sensor always powered up as alarm
function is enabled, but the suspend callback of imx thermal returns
success only if thermal sensor is powered down, so it will always returns
fail hence break system's suspend, this patch disables imx thermal sensor
before suspend and re-enable it after resume.

Signed-off-by: Anson Huang <b20788@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2014-01-02 10:00:16 +08:00
Philipp Zabel 37713a1e8e thermal: imx: implement thermal alarm interrupt handling
Enable automatic measurements at 10 Hz and use the alarm interrupt to react
more quickly to sudden temperature changes above the passive or critical
temperature trip points.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15 14:57:42 +08:00
Philipp Zabel 017e51420c thermal: imx: dynamic passive and SoC specific critical trip points
Set passive and critical trip point values depending on the maximum die
temperature stored in the OCOTP fuses. This allows higher trip points
for industrial and automotive rated i.MX6 SoCs.
Also allow to configure the passive trip point from userspace.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2013-08-15 14:57:33 +08:00
Shawn Guo ca3de46b50 thermal: add imx thermal driver support
This is based on the initial imx thermal work done by
Rob Lee <rob.lee@linaro.org> (Not sure if the email address is still
valid).  Since he is no longer interested in the work and I have
rewritten a significant amount of the code, I just took the authorship
over from him.

It adds the imx thermal support using Temperature Monitor (TEMPMON)
block found on some Freescale i.MX SoCs.  The driver uses syscon regmap
interface to access TEMPMON control registers and calibration data, and
supports cpufreq as the cooling device.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
2013-08-13 09:45:34 -04:00