We set host_specified_ha_region = true on certain request but this is a
global state which stays 'true' forever. We need to reset it when we
receive a request where ha_region is not specified. I did not see any
real issues, the bug was found by code inspection.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we iterate through all HA regions in handle_pg_range() we have an
assumption that all these regions are sorted in the list and the
'start_pfn >= has->end_pfn' check is enough to find the proper region.
Unfortunately it's not the case with WS2016 where host can hot-add regions
in a different order. We end up modifying the wrong HA region and crashing
later on pages online. Modify the check to make sure we found the region
we were searching for while iterating. Fix the same check in pfn_covered()
as well.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kdump keeps biting. Turns out CHANNELMSG_UNLOAD_RESPONSE is always
delivered to the CPU which was used for initial contact or to CPU0
depending on host version. vmbus_wait_for_unload() doesn't account for
the fact that in case we're crashing on some other CPU we won't get the
CHANNELMSG_UNLOAD_RESPONSE message and our wait on the current CPU will
never end.
Do the following:
1) Check for completion_done() in the loop. In case interrupt handler is
still alive we'll get the confirmation we need.
2) Read message pages for all CPUs message page as we're unsure where
CHANNELMSG_UNLOAD_RESPONSE is going to be delivered to. We can race with
still-alive interrupt handler doing the same, add cmpxchg() to
vmbus_signal_eom() to not lose CHANNELMSG_UNLOAD_RESPONSE message.
3) Cleanup message pages on all CPUs. This is required (at least for the
current CPU as we're clearing CPU0 messages now but we may want to bring
up additional CPUs on crash) as new messages won't be delivered till we
consume what's pending. On boot we'll place message pages somewhere else
and we won't be able to read stale messages.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hyper-V VMs can be replicated to another hosts and there is a feature to
set different IP for replicas, it is called 'Failover TCP/IP'. When
such guest starts Hyper-V host sends it KVP_OP_SET_IP_INFO message as soon
as we finish negotiation procedure. The problem is that it can happen (and
it actually happens) before userspace daemon connects and we reply with
HV_E_FAIL to the message. As there are no repetitions we fail to set the
requested IP.
Solve the issue by postponing our reply to the negotiation message till
userspace daemon is connected. We can't wait too long as there is a
host-side timeout (cca. 75 seconds) and if we fail to reply in this time
frame the whole KVP service will become inactive. The solution is not
ideal - if it takes userspace daemon more than 60 seconds to connect
IP Failover will still fail but I don't see a solution with our current
separation between kernel and userspace parts.
Other two modules (VSS and FCOPY) don't require such delay, leave them
untouched.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both devm_ioremap() and devm_ioremap_wc() functions return either
a pointer to valid iomem region or NULL, check for IS_ERR() is improper
and may result in oops on error path. Now on error -ENOMEM is returned.
Fixes: 0ab163ad1e ("misc: sram: switch to ioremap_wc from ioremap")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable p is a data structure which is used by the driver core
internally and it is not expected that busses will be directly accessing
these driver core internal only data.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A control message reply may not be received if either a link reset has
occurred or disconnection is initiated by the FW.
In the both cases the client state will be set straight to DISCONNECTED
and the driver will wait till timeout.
Adding DISCONNECTED state in the waiting condition will release the
client from the stall.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Timeout on notify request is not a fatal condition, and actually
cleaning control queues will disrupt other control flows of the
same client.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a message is received and amthif client is not in reading state
the message is ignored and left dangling in the queue. This may happen
after one of the amthif host connections is closed w/o completing the
reading. Another client will pick up a wrong message on next read
attempt which will lead to link reset.
To prevent this the driver has to properly discard the message when
amthif client is not in reading state.
Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the case when disconnection is initiated from the FW
the driver is flushing items from the write control list while
iterating over it:
mei_irq_write_handler()
list_for_each_entry_safe(ctrl_wr_list) <-- outer loop
mei_cl_irq_disconnect_rsp()
mei_cl_set_disconnected()
mei_io_list_flush(ctrl_wr_list) <-- destorying list
We move the list flushing to the completion routine.
Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Global me_client_index is used only during the enumeration process and
can be effectively replaced by me_addr data from the last enumeration
response as we always enumerate clients in the increasing order.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If cldrv->probe() failed in mei_cl_device_probe(),
the mei module is left pinned.
The patch moves __module_get(THIS_MODULE) after cldrv->probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If devm_add_action() fails we are explicitly calling dma_unmap_single(),
pci_unmap_single() and kfree(). Lets use the helper
devm_add_action_or_reset() and return directly in case of error, as we
know that the cleanup function has been already called by the helper if
there was any error. At that same time remove the variable rc which
becomes unused now.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simplify the logic that picks MMIO ranges by pulling out the
logic related to trying to lay frame buffer claim on top of where
the firmware placed the frame buffer.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Later in the boot sequence, we need to figure out which memory
ranges can be given out to various paravirtual drivers. The
hyperv_fb driver should, ideally, be placed right on top of
the frame buffer, without some other device getting plopped on
top of this range in the meantime. Recording this now allows
that to be guaranteed.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes vmbus_allocate_mmio() and vmbus_free_mmio() so
that when child paravirtual devices allocate memory-mapped I/O
space, they allocate it privately from a resource tree pointed
at by hyperv_mmio and also by the public resource tree
iomem_resource. This allows the region to be marked as "busy"
in the private tree, but a "bridge window" in the public tree,
guaranteeing that no two bridge windows will overlap each other
but while also allowing the PCI device children of the bridge
windows to overlap that window.
One might conclude that this belongs in the pnp layer, rather
than in this driver. Rafael Wysocki, the maintainter of the
pnp layer, has previously asked that we not modify the pnp layer
as it is considered deprecated. This patch is thus essentially
a workaround.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A patch later in this series allocates child nodes
in this resource tree. For that to work, this tree
needs to be sorted in ascending order.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch modifies all the callers of vmbus_mmio_allocate()
to call vmbus_mmio_free() instead of release_mem_region().
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a function that reverses everything
done by vmbus_allocate_mmio(). Existing code just called
release_mem_region(). Future patches in this series
require a more complex sequence of actions, so this function
is introduced to wrap those actions.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In existing code, this tree of resources is created
in single-threaded code and never modified after it is
created, and thus needs no locking. This patch introduces
a semaphore for tree access, as other patches in this
series introduce run-time modifications of this resource
tree which can happen on multiple threads.
Signed-off-by: Jake Oshins <jakeo@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement APIs for in-place consumption of vmbus packets. Currently, each
packet is copied and processed one at a time and as part of processing
each packet we potentially may signal the host (if it is waiting for
room to produce a packet).
These APIs help batched in-place processing of vmbus packets.
We also optimize host signaling by having a separate API to signal
the end of in-place consumption. With netvsc using these APIs,
on an iperf run on average I see about 20X reduction in checks to
signal the host.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for implementing APIs for in-place consumption of VMBUS
packets, movve some ring buffer functionality into hyperv.h
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation for moving some ring buffer functionality out of the
vmbus driver, export the API for signaling the host.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the virt_xx barriers that have been defined for use in virtual machines.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the READ_ONCE macro to access variabes that can change asynchronously.
This is the recommended mechanism for dealing with "unsafe" compiler
optimizations.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce separate functions for estimating how much can be read from
and written to the ring buffer.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On the consumer side, we have interrupt driven flow management of the
producer. It is sufficient to base the signaling decision on the
amount of space that is available to write after the read is complete.
The current code samples the previous available space and uses this
in making the signaling decision. This state can be stale and is
unnecessary. Since the state can be stale, we end up not signaling
the host (when we should) and this can result in a hang. Fix this
problem by removing the unnecessary check. I would like to thank
Arseney Romanenko <arseneyr@microsoft.com> for pointing out this issue.
Also, issue a full memory barrier before making the signaling descision
to correctly deal with potential reordering of the write (read index)
followed by the read of pending_sz.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The drivers which depends on parport may sometimes try to iniitialize
and register with parport bus even before parport has actually
registered with the device layer.
The simplest solution is to mark the init function as subsys_initcall()
and load the parport before the other drivers loads.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return statements at the end of void functions are useless.
The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
identifier f;
expression e;
@@
void f(...) {
<...
- return
e;
...>
}
//</smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
My static checker complains that we still use "mark" even when the
_scif_fence_mark() call fails so it can be uninitialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIC VOP driver does two successive reads from user space to read a
variable length data structure. Kernel memory corruption can result if
the data structure changes between the two reads. This patch disallows
the chance of this happening.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116651
Reported by: Pengfei Wang <wpengfeinudt@gmail.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are:
* Intel TH/MSU: improved resource handling and releasing
* Intel TH/MSU: rehashed locking around buffer accesses
* Intel TH/outputs: better sysfs group handling
* Intel TH, STM: various bugfixes and smaller improvements
* Intel TH: added a PCI ID for Broxton-M SOC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iF4EABEIAAYFAlcXeJMACgkQ68X2JGMFV//ycAEAkigLTg5OWwGau0okPUnNn5G8
uzH7mPsA8QtgXNQOJBkA/RVk+FJeOx8yR3oUSl9BSXYGPcr/b2gZrC7SLRP0V5rX
=/vz4
-----END PGP SIGNATURE-----
Merge tag 'stm-for-greg-20160420' of git://git.kernel.org/pub/scm/linux/kernel/git/ash/stm into char-misc-next
Alexander writes:
stm class/intel_th: Updates for 4.7
These are:
* Intel TH/MSU: improved resource handling and releasing
* Intel TH/MSU: rehashed locking around buffer accesses
* Intel TH/outputs: better sysfs group handling
* Intel TH, STM: various bugfixes and smaller improvements
* Intel TH: added a PCI ID for Broxton-M SOC
This adds Intel(R) Trace Hub PCI ID for Broxton-M SOC.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Laurent Fert <laurent.fert@intel.com>
Commit 9567366fef ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK(). Fix it.
Fixes: 9567366fef ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Samy <f.fallen45@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Here are some small char/misc driver fixes for 4.6-rc4. Full details
are in the shortlog, nothing major here.
These have all been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS4DQACgkQMUfUDdst+ylBIwCgtag4UtH2i+NwFiErDmmnokSz
h5oAn1488h1FTiXolyA9MnmRkWlf0ZPI
=aYD7
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc driver fixes for 4.6-rc4. Full details
are in the shortlog, nothing major here.
These have all been in linux-next for a while with no reported issues"
* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lkdtm: do not leak free page on kmalloc failure
lkdtm: fix memory leak of base
lkdtm: fix memory leak of val
extcon: palmas: Drop stray IRQF_EARLY_RESUME flag
Here are 3 small fixes 4.6-rc4. Two fix up some lz4 issues with big
endian systems, and the remaining one resolves a minor debugfs issue
that was reported.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS3ucACgkQMUfUDdst+ynw1QCbBGgbY7Xt08whNFcAP81z1Q5X
fmsAn1fyrhfsxe+JnybzswsTOjFw99Xd
=YX6h
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull misc fixes from Greg KH:
"Here are three small fixes for 4.6-rc4.
Two fix up some lz4 issues with big endian systems, and the remaining
one resolves a minor debugfs issue that was reported.
All have been in linux-next with no reported issues"
* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
lib: lz4: cleanup unaligned access efficiency detection
lib: lz4: fixed zram with lz4 on big endian machines
debugfs: Make automount point inodes permanently empty
Here are some small USB fixes for 4.6-rc4.
Mostly xhci fixes for reported issues, a UAS bug that has hit a number
of people, including stable tree users, and a few other minor things.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlcS3ngACgkQMUfUDdst+ykPlgCeJ2UJu7dYz3ICVnxQ4zLkNG6A
yI0AoKa37VYqNkqRadj97g9E5S6KcsXi
=KmX3
-----END PGP SIGNATURE-----
Merge tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB fixes for 4.6-rc4.
Mostly xhci fixes for reported issues, a UAS bug that has hit a number
of people, including stable tree users, and a few other minor things.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: hcd: out of bounds access in for_each_companion
USB: uas: Add a new NO_REPORT_LUNS quirk
USB: uas: Limit qdepth at the scsi-host level
doc: usb: Fix typo in gadget_multi documentation
usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
usb: xhci: fix wild pointers in xhci_mem_cleanup
usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
xhci: resume USB 3 roothub first
usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
cdc-acm: fix crash if flushed with nothing buffered
Okay we some driver fixes piled up, so time to get them up.
This time we have some odd fixes in hsu, edma, omap and xilinx.
Usual fixes and nothing special
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bSYQ
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time we have some odd fixes in hsu, edma, omap and xilinx.
Usual fixes and nothing special"
* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: fix master selection
dmaengine: edma: special case slot limit workaround
dmaengine: edma: Remove dynamic TPTC power management feature
dmaengine: vdma: don't crash when bad channel is requested
dmaengine: omap-dma: Do not suppress interrupts for memcpy
dmaengine: omap-dma: Fix polled channel completion detection and handling
dmaengine: hsu: correct use of channel status register
dmaengine: hsu: correct residue calculation of active descriptor
dmaengine: hsu: set HSU_CH_MTSR to memory width
Pull locking fixlet from Ingo Molnar:
"Fixes a build warning on certain Kconfig combinations"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Fix print_collision() unused warning
Pull block fixes from Jens Axboe:
"A few fixes for the current series. This contains:
- Two fixes for NVMe:
One fixes a reset race that can be triggered by repeated
insert/removal of the module.
The other fixes an issue on some platforms, where we get probe
timeouts since legacy interrupts isn't working. This used not to
be a problem since we had the worker thread poll for completions,
but since that was killed off, it means those poor souls can't
successfully probe their NVMe device. Use a proper IRQ check and
probe (msi-x -> msi ->legacy), like most other drivers to work
around this. Both from Keith.
- A loop corruption issue with offset in iters, from Ming Lei.
- A fix for not having the partition stat per cpu ref count
initialized before sending out the KOBJ_ADD, which could cause user
space to access the counter prior to initialization. Also from
Ming Lei.
- A fix for using the wrong congestion state, from Kaixu Xia"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: loop: fix filesystem corruption in case of aio/dio
NVMe: Always use MSI/MSI-x interrupts
NVMe: Fix reset/remove race
writeback: fix the wrong congested state variable definition
block: partition: initialize percpuref before sending out KOBJ_ADD
Pull libnvdimm fixes from Ross Zwisler:
"Two fixes:
- Fix memcpy_from_pmem() to fallback to memcpy() for architectures
where CONFIG_ARCH_HAS_PMEM_API=n.
- Add a comment explaining why we write data twice when clearing
poison in pmem_do_bvec().
This has passed a boot test on an X86_32 config, which was the
architecture where issue #1 above was first noticed"
Dan Williams adds:
"We're giving this multi-maintainer setup a shot, so expect libnvdimm
pull requests from either Ross or I going forward"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, pmem: clarify the write+clear_poison+write flow
pmem: fix BUG() error in pmem.h:48 on X86_32
Vitaly Kuznetsov
Vladimir Zapolskiy
Sudip Mukherjee
Alexander Usyskin
Alexey Khoroshilov
Jake Oshins
K. Y. Srinivasan
Amitoj Kaur Chawla
Dan Carpenter
Sudeep Dutt
Ashutosh Dixit
Greg Kroah-Hartman
Alexander Shishkin
Linus Torvalds
Ahmed Samy
Vinod Koul