Commit Graph

53 Commits

Author SHA1 Message Date
Vineet Gupta 6dc97ee6d9 Revert "ARC: [plat-axs10x] add Ethernet PHY description in .dts"
This reverts commit 667a490bdb.

This is needed to get ethernet(stmmac) working in 4.6-rc2 on axs103.

4.5 needed this fix, but apprently stmmac has gained some fixes which
warrant reversal of this.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-04-07 14:59:09 +05:30
Alexey Brodkin 667a490bdb ARC: [plat-axs10x] add Ethernet PHY description in .dts
Commit e34d65696d ("stmmac: create of compatible mdio bus for stmmac
driver") broke DW GMAC functionality on ARC AXS10x boards:

That's what happens on eth0 up:
  --------------------------->8------------------------
| libphy: PHY stmmac-0:ffffffff not found
| eth0: Could not attach to PHY
| stmmac_open: Cannot attach to PHY (error: -19)
  --------------------------->8------------------------

Simplest solution is to add PHY description in board's .dts.
And so we do here.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: David S. Miller <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 4.5
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-17 17:45:18 +05:30
Lada Trimasova df420fd688 arc: [plat-nsimosci*] use ezchip network driver
Since ezchip network driver was adapted to little endian architecture
this patch provides the corresponding arch/arc/{boot/dts,configs}/ updates so
we can switch over to this device-model/driver for OSCI platform.

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-15 16:05:59 +05:30
Vineet Gupta 0b291635fc ARC: [plat-nsim] document ranges
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-03-12 11:58:44 +05:30
Vineet Gupta ff1c0b6a79 ARC: [plat-sim] unbork non default CONFIG_LINUX_LINK_BASE
HIGHMEM support bumped the default memory size for nsim platform to 1G.
Thus total memory ended at the very edge of start of peripherals address
space. With linux link base shifted, memory started bleeding into
peripheral space which caused early boot bad_page spew !

Fixes: 29e332261d ("ARC: mm: HIGHMEM: populate high memory from DT")
Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-17 11:06:43 +05:30
Alexey Brodkin 6d1a2adef7 ARC: [axs10x] cap ethernet phy to 100 Mbit/sec
Current ARC SDP boards cannot reliably handle 1Gbit
Ethernet connections due to limitations in hardware.

To make sure networking is stable on the board we're
limiting phy to 100 Mbit.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-07 19:40:03 +05:30
Linus Torvalds 9bbd4b9f38 DeviceTree updates for 4.4:
- DT binding doc consolidation moving similar bindings to common
   locations. The majority of these are display related which were
   scattered in video/, fb/, drm/, gpu/, and panel/ directories.
 - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs
   in the tree for most arches with dts files (except powerpc for now).
 - OF_IRQ=n fixes for user enabled CONFIG_OF.
 - of_node_put ref counting fixes from Julia Lawall.
 - Common DT binding for wakeup-source and deprecation of all similar
   bindings.
 - DT binding for PXA LCD controller.
 - Allow ignoring failed PCI resource translations in order to ignore
   64-bit addresses on non-LPAE 32-bit kernels.
 - Support setting the NUMA node from DT instead of only from parent
   device.
 - Couple of earlycon DT parsing fixes for address and options.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWO+HwAAoJEPr7XbWNvGHDFOoP/RcK4z5dtVQL2XRFbJBqRBZU
 riMc4BZkwpcKGXjzZlMrLw+mg4vaoLKSIAGAsYkgdDOKbYphQQdVwDzN099Fzpzy
 EE6K7Q+AW618z34AWdDjcpJYzSFnjAjYdh6JabohmKdPlxobR1RsKT+nRpDOGfeO
 c1DmxAQ1Fiav+xAI4m0YUuyxQDUeFYC0mVcVPzRbWZj31Ia5BgIrvT+V7fM55CTb
 dOAYWDHrfOw+yYI98sqZoSAb5H+E3UuY1ymBMhiP16Ot2vCyIKRYwhDokF9VYO/0
 MpIMhCgv1jmE5NCbBeYSSJUePySvvnuyYe6HIaJQjV8KGEZ5C7c1iLMgtvov2KVI
 bcSx6nPH/u5FuWIhWdMINPc50AQBAK/akYcgoCVjioVX+4WY2pqLvsXW2arEr//Z
 XY3FUpgS6eI42HBsj4SxrGnzaRc2jPOs6yiANkywmHnpWcyvszCxUEvf0Mh0cbkm
 diu31/owdpUO5imCe+ErtGVV3vY2VUMnbcm8J61pqL52OZNPLZUUEfktv1JCGW7y
 cVdnlgeGSFuCbY4jUErvxtQGJQLFwf7Gg1U/VfFXX2iuQGAACB1KwxY5sR6P5Ghz
 W6NvOTT36kaM9WGqn/bquOd6EmKcx9aZfgRLOkgV86Q/11gHKpuRjkrsth7rIJDI
 97qkGiWl4t1Ll5T4StK8
 =tGCy
 -----END PGP SIGNATURE-----

Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull DeviceTree updates from Rob Herring:
 "A fairly large (by DT standards) pull request this time with the
  majority being some overdue moving DT binding docs around to
  consolidate similar bindings.

   - DT binding doc consolidation moving similar bindings to common
     locations.  The majority of these are display related which were
     scattered in video/, fb/, drm/, gpu/, and panel/ directories.

   - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all
     dtbs in the tree for most arches with dts files (except powerpc for
     now).

   - OF_IRQ=n fixes for user enabled CONFIG_OF.

   - of_node_put ref counting fixes from Julia Lawall.

   - Common DT binding for wakeup-source and deprecation of all similar
     bindings.

   - DT binding for PXA LCD controller.

   - Allow ignoring failed PCI resource translations in order to ignore
     64-bit addresses on non-LPAE 32-bit kernels.

   - Support setting the NUMA node from DT instead of only from parent
     device.

   - Couple of earlycon DT parsing fixes for address and options"

* tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits)
  MAINTAINERS: update DT binding doc locations
  devicetree: add Sigma Designs vendor prefix
  of: simplify arch_find_n_match_cpu_physical_id() function
  Documentation: arm: Fixed typo in socfpga fpga mgr example
  Documentation: devicetree: fix reference to legacy wakeup properties
  Documentation: devicetree: standardize/consolidate on "wakeup-source" property
  drivers: of: removing assignment of 0 to static variable
  xtensa: enable building of all dtbs
  mips: enable building of all dtbs
  metag: enable building of all dtbs
  metag: use common make variables for dtb builds
  h8300: enable building of all dtbs
  arm64: enable building of all dtbs
  arm: enable building of all dtbs
  arc: enable building of all dtbs
  arc: use common make variables for dtb builds
  of: add config option to enable building of all dtbs
  of/fdt: fix error checking for earlycon address
  of/overlay: add missing of_node_put
  of/platform: add missing of_node_put
  ...
2015-11-06 12:17:09 -08:00
Vineet Gupta 29e332261d ARC: mm: HIGHMEM: populate high memory from DT
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 19:50:26 +05:30
Vineet Gupta f759ee57b2 ARC: Ensure DT mem base is same as what kernel is built with
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 16:13:42 +05:30
Rob Herring b83abc8c2c arc: enable building of all dtbs
Enable building all dtb files when CONFIG_OF_ALL_DTBS is enabled. The dtbs
are not really dependent on a platform being enabled or any other kernel
config, so for testing coverage it is convenient to build all of the dtbs.
This builds all dts files in the tree, not just targets listed.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-27 16:12:13 -05:00
Rob Herring 10375ccc67 arc: use common make variables for dtb builds
Use dtb-y and always make variables to build dtbs instead of explicit
dtbs rule. This is in preparation to support building all dtbs.

Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-27 16:12:13 -05:00
Vineet Gupta 090749502f ARC: add/fix some comments in code - no functional change
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-20 19:05:49 +05:30
Alexey Brodkin e2fc61f384 ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ
With up-to-date FPGA builds ARC cores are supposed to correctly operate
even with 90 MHz clock (which is a target frequency for AXS103 release).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-linux-dev@synopsys.com
2015-07-09 17:36:31 +05:30
Ruud Derwig 2924cd18c4 ARCv2: [vdk] dts files and defconfig for HS38 VDK
- CONFIG_ARC_UBOOT_SUPPORT to handle arguments passed in r0, r1, r2
 - CONFIG_DEVTMPFS_MOUNT for mouting rootfs since it uses external cpio
   for rootfs

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Ruud Derwig <rderwig@synopsys.com>
[vgupta: folded the Main baord DT files for smp/up into one]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:21 +05:30
Vineet Gupta 5fa2daaa8d ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:20 +05:30
Alexey Brodkin e0183f5230 ARC: [axs101] Prepare for AXS103
To avoid duplicating the MB DTS file, move the MB intc entry into cpu
card specific file

Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:20 +05:30
Vineet Gupta a12ebe16a5 ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-25 06:00:19 +05:30
Alexey Brodkin 7cacc5bf60 ARC: [axs101] STAR 9000799830: Fix SD cards support
As DW Mobile Storage databook says it's required to use "Hold Register"
if card is enumerated in SDR12 or SDR25 modes.
It means we need to act in the same way as in Altera's Socfpga
implementation - set "use hold reg" bit in commad.

Note that for upstream proper solution would be to remove
dw_mci_pltfm_prepare_command() at all and set the bit right in
dw_mci_prepare_command() for all platforms.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:31 +05:30
Vineet Gupta 8d0d56ba24 ARC: [axs101] support early 8250 uart
Earlycon calculates UART clock as "BASE_BAUD * 16". In case of ARC
"BASE_BAUD" is calculated dynamically in runtime, basically it is an
alias to arc_early_base_baud(), which in turn just does
"arc_base_baud/16".

8250 UART on AXS/SDP board uses 33.3MHz clock source which is set in
"arc_base_baud" with this change.

Additional compatibility string "snps,arc-sdp" is introduced as well
because there're different flavours of AXS boards but they all share the
same motherboard and so it's possible to re-use the same code for
motherbord even if CPU daughterboard changes.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:30 +05:30
Alexey Brodkin 556cc1c5f5 ARC: [axs101] Add support for AXS101 SDP (software development platform)
The AXS10x platforms consist of a mainboard with peripherals,
on which several daughter cards can be placed. The daughter cards
typically contain a CPU and memory.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:30 +05:30
Vineet Gupta fd1557923b ARC: [plat_arcfpga]->[plat_sim]
* Remove remanants of legacy ARC FPGA platforms (AA4, ML509...)
* Only nsim simulation platform is left, rename platform accordingly
* AA4 DT stuff is compatible with nsim for ARC700 so rename it too

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:26 +05:30
Vineet Gupta 30fdd373f2 ARC: perf: Rename DT binding to not confuse with power mgmt
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-04-20 18:27:36 +05:30
Andy Shevchenko d8ded50f8b dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
Instead of using magic number in the code the patch provides
DW_DMA_MAX_NR_MASTERS constant.

While here, restrict the reading of data width array by amount of the actual
number of AHB masters.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-04 22:39:44 -08:00
Vineet Gupta e8ef060b37 ARC: [nsimosci] move peripherals to match model to FPGA
This allows the sdplite/Zebu images to run on OSCI simulation platform

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.14, 3.16
2014-12-15 11:24:58 +05:30
Vineet Gupta 5c05483e2d ARC: [nsimosci] Allow "headless" models to boot
There are certain test configuration of virtual platform which don't
have any real console device (uart/pgu). So add tty0 as a fallback console
device to allow system to boot and be accessible via telnet

Otherwise with ttyS0 as only console, but 8250 disabled in kernel build,
init chokes.

Reported-by: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org> #3.10, 3.12, 3.14, 3.16
2014-10-13 14:46:15 +05:30
Vineet Gupta 70e956483e ARC: [arcfpga] consolidate machine description, DT
* AA4/ML509 have same machine descriptions
* Rename simulation machine description

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-10-13 14:46:12 +05:30
Greg Kroah-Hartman 22524b02b1 Revert "ARC: [arcfpga] stdout-path now suffices for earlycon/console"
This reverts commit 9da433c0a0.

Vineet writes:

Could you please revert this single patch from tty-next for 3.17 as the
needed core changes are not yet finalized.

Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-27 23:10:43 -07:00
Vineet Gupta 9da433c0a0 ARC: [arcfpga] stdout-path now suffices for earlycon/console
With recent improvements to serial/of core from Grant and Rob,
stdout-path alone suffices for setting up earlycon/console.

arc_uart driver is already equipped to handle that, switch the DT now.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 15:45:30 -07:00
Vineet Gupta 2e6fb7cbd0 serial/arc: remove earlyprintk support and switch to earlycon
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10 15:43:27 -07:00
Vineet Gupta e87a850b9c ARC: [arcfpga] Early ARC UART to be only activated by cmdline
Earlier CONFIG_SERIAL_ARC_CONSOLE would unconditionally enable the
legacy ARC UART based early console even if platform lacked that UART
(e.g. nSIM OSCI platform).

So a multi-platform image containing the 2 UART drivers won't work.

Fix that by probing the driver only if "earlyprintk=ttyARC0" is present
in cmdline.

Reported-by: Chuck Jordan <cjordan@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-03 14:20:09 +05:30
Vineet Gupta 61fb4bfc01 ARC: [nsimosci] Unbork console
Despite the switch to right UART driver (prev patch), serial console
still doesn't work due to missing CONFIG_SERIAL_OF_PLATFORM

Also fix the default cmdline in DT to not refer to out-of-tree
ARC framebuffer driver for console.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org>   #3.10, 3.12, 3.13, 3.14
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
2014-04-05 18:36:51 +05:30
Mischa Jonker 6eda477b3c ARC: [nsimosci] Change .dts to use generic 8250 UART
The Synopsys APB DW UART has a couple of special features that are not
in the System C model. In 3.8, the 8250_dw driver didn't really use these
features, but from 3.9 onwards, the 8250_dw driver has become incompatible
with our model.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: <stable@vger.kernel.org>   #3.10, 3.12, 3.13, 3.14
Cc: Francois Bedard <Francois.Bedard@synopsys.com>
2014-04-05 18:36:45 +05:30
Vineet Gupta 6041003a8f ARC: Remove unused DT template file
Commit abe11ddea1 "Enabling DeviceTree for Angel4 board" made
angel4.dts as default leaving the orphan skeleton file behind.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-31 19:20:35 +05:30
Mischa Jonker 80c1fe4c0d ARC: add uImage to .gitignore
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-03-26 14:31:26 +05:30
Mischa Jonker 0dd450fe13 ARC: Add perf support for ARC700 cores
This adds basic perf support for ARC700 cores. Most PERF_COUNT_HW* events
are supported now.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-11-12 09:45:38 +05:30
Christian Ruppert 9c8e612d9d ARC: [TB10x] Updates for GPIO and pinctrl
Device tree and Kconfig updates for GPIO and pinctrl drivers.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-11-11 09:57:44 +05:30
Vineet Gupta fe240f11cd ARC: Add some .gitignore entries
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-08-26 09:40:24 +05:30
Linus Torvalds 8f041e6ca1 Couple of Platform updates (Device Tree files primarily) given that the
corresponding drivers (net/ethernet/arc/*, irqctl/irq-tb10x.c) have now
 been merged into your tree.
 
 Ideally these shd have been part of same submissions, oh well...
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR3OKpAAoJEGnX8d3iisJeB5EP/i4HlYQXrZWpT/6Bm7gdyzqA
 hvA0oObRvGfgVbxG7R/9sKHU/FDx479pwrZbXPU4I+WM34QRnueXtAodBzrK7jQp
 FdcBVN+YCcKUJh4Gxs+a5jtKj8v6u8+NaJc3L/S2+4vJlznoAY6CxnlQX3SK0SAC
 d7irz9ZlP58q8eFHBJXa96HMIf7A2EACmwG3Uo6oDj15LVx+XW5i2o6rABvfUNDx
 eKnSekoav1CRJyW4RJYI/hJdUM3vcbbRcz/2IyqSquWn8EqyZWY9iijdIwoUha3c
 6geZ2YXi4rikU5kA/3cVuEQa68gj7gTaceEE7RT8y5H0DQjpgB07Tkyr9kFLpnRI
 b+SGpQVA6FsLtDFNiRjsu2Ft/411UnRfhgv5d7SsuCqeVVPkCEd13Ttj4g49EJjw
 Z3FWXTY0f/zYOSzU/6UQ6KZ/ZEvnnasLSCzDPrEK7WVu4lFuMz9BJglzSAbMMUQI
 XZaWsm8ForzuYYUDFXQ79ORGsGKjhq3Pl1kF4CQ4TYjL75DwWgEAi9TI6ENuLH8+
 +Ox4l385V51/YgcasawgpmGG1APgLtqw5ZFu6GUu6mytQs2huenaoT9+ov2FSu2N
 B0o04nmm6h1rgSdiq7ZKDHv5lS1RXYYgoIDYYLqp5Lxk2JcMxvZYfMhbb/4KV+7/
 y6w3ui2SNA5ttV7v41zW
 =QgUU
 -----END PGP SIGNATURE-----

Merge tag 'arc-v3.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull second set of ARC architecture updates from Vineet Gupta:
 "Couple of Platform updates (Device Tree files primarily) given that
  the corresponding drivers (net/ethernet/arc/*, irqctl/irq-tb10x.c)
  have now been merged into your tree.

  Ideally these shd have been part of same submissions, oh well..."

* tag 'arc-v3.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: [TB10x] Updates for irqchip driver
  ARC: [plat-arcfpga] Enable arc_emac for ARCAngle4 Board
2013-07-10 10:11:26 -07:00
Christian Ruppert 723e2b801d ARC: [TB10x] Updates for irqchip driver
Device tree and Kconfig updates for irqchip driver.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-28 15:07:42 +05:30
Alexey Brodkin d0e63ed941 ARC: [plat-arcfpga] Enable arc_emac for ARCAngle4 Board
* Add arc_emac to DeviceTree DT description
  "Documentation/devicetree/bindings/net/arc_emac.txt".

* Update defconfig correspondingly

[vgupta: tweaked changelog]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-28 15:07:20 +05:30
Christian Ruppert 9803f86894 i2c-designware: make SDA hold time configurable
This patch makes the SDA hold time configurable through device tree.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com> for arch/arc bits
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-06-26 16:02:06 +02:00
Christian Ruppert 7d19273cd0 ARC: [TB10x] Remove redundant abilis,simple-pinctrl mechanism
The TB10x platform port includes a custom mechanism using to set up
default pin controller configurations using abilis,simple-default
pin configurations of nodes compatible with abilis,simple-pinctrl. This
mechanism is redundant with the Linux standard "default" pin
configuration, see commit ab78029ecc
"drivers/pinctrl: grab default handles from device core".
This patch removes the TB10x custom mechanism in favour of the Linux
standard.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-15 10:12:03 +05:30
Mischa Jonker a92a5d0dce ARC: Add support for nSIM OSCI System C model
This adds support for an ARC Virtual Platform. This platform is based on the
System C standard promoted by the OSCI (Open System C Initiative) and uses
nSIM to simulate the ARC CPU core itself.

Users can build a virtual SoC by combining System C models of peripherals
and CPU cores.

Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:44:00 +05:30
Christian Ruppert 0dfad77d0a ARC: [TB10x] Adapt device tree to new compatible string
The original device tree was written using a slightly different
implementation of the fixed-factor-clock device tree binding. The
compatible string must be modified in order to be compatible with the
new implementation.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:59 +05:30
Christian Ruppert 2eb9504bcc ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
These are the device tree files for the Abilis Systems TB100 and TB101 ICs and
their respective development kit PCBs. These files are committed in preparation
of the following patch set which adds support for these chips to the ARC
platform.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-05-07 13:43:58 +05:30
Vineet Gupta a89516b31c ARC: [kbuild] Avoid DTB rebuilds if DTS are untouched
Currently, for every ARC kernel build I see the following:

--------------->8-----------------
  DTB    arch/arc/boot/dts/angel4.dtb.S
  AS      arch/arc/boot/dts/angel4.dtb.o
  LD      arch/arc/boot/dts/built-in.o
rm arch/arc/boot/dts/angel4.dtb.S        <-- forces rebuild next iter
  CHK     kernel/config_data.h
--------------->8-----------------

This is because *.dts.S is intermediate file in dtb generation and is by
default deleted by make which needs a ".SECONDARY" hint to NOT do so.

This could have ideally been done in scripts/Makefile.lib - for benefit
of all, however .SECONDARY doesn't seem to work with wildcards.

Thanks to Stephen for suggesting .SECONDARY (vs .PRECIOUS) and making
that work using a non wildcard version in arch makefile.

Thanks to James Hogan for pointing out that *.dtb.S now needs to be
added to clean-files

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-17 18:19:14 +05:30
Vineet Gupta 104058ede7 ARC: [build] Allow uncompressed uImage
The existing uImage target always generates gzip compressed image which
drags bootup for some very slow FPGA customer boards.

So introduce seperate make targets:uImage.{bin,gz} with uncompressed
being default. Also tie gz generation to CONFIG_KERNEL_GZIP, which a
platform can select in it's Kconfig if it wishes gz to be default.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Vineet Gupta fb0990bbf5 ARC: [build] cleanup Makefile a bit
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-04-09 12:21:15 +05:30
Vineet Gupta fc32781bfd ARC: [plat-arcfpga] DT arc-uart bindings change: "baud" => "current-speed"
Per Grant's review comment - driver changes via tty tree

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-02-15 23:16:22 +05:30
Vineet Gupta abe11ddea1 ARC: [plat-arcfpga]: Enabling DeviceTree for Angel4 board
* arc-uart platform device now populated dynamically, using
  of_platform_populate() - applies to any other device whatsoever.

* uart in turn requires incore arc-intc to be also present in DT

* A irq-domain needs to be instantiated for IRQ requests by DT probed
  device (e.g. arc-uart)

TODO: switch over to linear irq domain once all devs have been
      transitioned to DT

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Arnd Bergmann <arnd@arndb.de>
2013-02-15 23:15:57 +05:30