Checking carrier status in netvsc_open() is not necessary.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
param->u.wpa_key.key_len comes from the user. If it's too large we
would write past the end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was originally there to avoid churn during a complex change.
Now everything is stable lets get rid of this as it is missleading
and confusing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that all vmbus audit related comments have been addressed,
update the TODO file to reflect this.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WE21 clarified that ESSID should not be NULL terminated.
The existing code didn't NULL terminate, but did play with length
and then reset it again. Just stop it.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WEXT changes between versions 15 and 21 have been taken care of,
so update the declared support.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add recently added events to the capabilities reported in iw_range.
Use capability macros instead of assuming the array offsets.
Explicitly list scan capabilities.
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers: staging: comedi: cb_das16_cs.c
fixed over 80 line issue, and removed a space before tab issue.
Signed-off-by: Christopher Rice <rice.christopher.a@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added log subject to printk()s in drivers/staging/comedi/drivers/pcmmio.c.
Signed-off-by: Johannes Thumshirn <morbidrsa@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Smatch has a new check for Rosenberg type information leaks where
structs are copied to the user with uninitialized stack data in them.
In this path, the .uLinkRate member doesn't get initialized so I've
set it to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the source file there are a lot of warnings. I will send it in parts to be more easy to
review. All the changes in this file its just alignment, and things like that.
Signed-off-by: Marcos Paulo de Souza <marcos.mage@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver has a long standing bug where removing and inserting the ethernet cable results in no packets being
trnasmitted / received and hence no autonegotiation occurring.
Fixed by resetting the rx/tx engines and queue on detecting a cable being removed.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
et131x_check_mii no longer exists, remove its declaration from the header file
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In et131x_netdev.c, a series of calls to enable and diasble the rx/tx engine and queue are being used in several different places.
Create two functions to encapsulate these calls, and replace many calls with just the one.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
et131x_check_mii() is now only being called from et131x_adjust_link.
Removed this call and associated subroutines, putting the functionality directly into et131x_adjust_link(), in preparation for further simplification.
Changed register checks from bare BMSR checks to use phydev/netif versions, also now uses adapter->link to track link state changes.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This will be used to determine if the link state has changed when the phydev
informs the et131x that a change has occurred (in et131x_adjust_link)
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not an exhaustive dump of the et131x registers, used while debugging a specific problem - seems a shame not to keep it around.
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add support for GTT based scrolling. Instead of pushing bits around we simply
use the GTT to change the mappings. This provides us with a very fast way to
scroll the display providing we have enough memory to allocate on 4K line
boundaries. In practice this seems to be the case except for very big displays
such as HDMI. It works out nicely on the usual configurations are netbooks and
tablets.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we are the console then a printk can hit us with a spin lock held (and
in fact the kernel will do its best to take printing lock).
In that case we cannot politely sleep when synching after an accelerated op
but must behave obnixously to be sure of getting the bits out.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix ak8975_probe() to jump to the appropriate exit labels when an error
occurs. With the previous code, some cleanup actions were being skipped
for some error conditions.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
gpio_is_valid() is the defined mechanism to determine whether a GPIO is
valid. Use this instead of assuming that 0 is an invalid GPIO.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tegra doesn't have irq_to_gpio() any more, and ak8975 is included in
tegra_defconfig. This causes a build failure. Instead, pass the GPIO name
through platform data.
[swarren: Rewrote commit description when I squashed this with my patch
to remove the irq_to_gpio() call]
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver already supports kfifo usage, so the term ring is
misleading and hence replaced.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They aren't always ring buffers, so just use buffer for all naming.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nothing in this file is specific to RING buffers so rename it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
also, IIO_RING_HARDWARE_BUFFER -> IIO_BUFFER_HARDWARE
These aren't always rings so the naming should not imply that.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not always a ring so naming is missleading.
Also, kfifo_buf is probably first buffer to take out of staging and it
definitely isn't a ring.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Numerous small fixes and additions of missing elements.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have a lot of drivers now, so the iio sub menu becomes quite large.
This patch creates sub menus for the different sensors.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The existing ad7745 driver didn't conform with the IIO spec for such devices.
It was way simpler to rewrite the existing driver, than actually fixing it.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
moving the final state, clearing of the client maps and
updating of mei state out from mei_host_client_properties function.
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
COUNTRY_CODE_MAX is not a valid country code. We're off by one here.
This gets passed to Dot11d_Channelmap() where it's used as an offset
into the ChannelPlan[] array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Code cleanup. Various names (ndev, net, dev) were used for the
same structure. Settled for 'ndev'.
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Added comments to make code more readable.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There was no performance rationale to use these guys.
Reported-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
By deleting three redundant functions. The spinlock was related to
event queue operation. Event queue data members were also renamed
to make their function more clear.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use constant for idle time setting.
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use constant to replace global variable used for watchdog polling
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replaced the global variable with constant
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use work queue to defer cfg80211 event handle jobs
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang
Dan Carpenter
Jonathan Cameron
K. Y. Srinivasan
David Kilroy
Christopher Rice
Johannes Thumshirn
Marcos Paulo de Souza
Mark Einon
Alan Cox
Stephen Warren
Manuel Stahl
Michael Hennerich
Jaap Crezee
Oren Weil
Roland Vossen
Franky Lin