Commit Graph

229 Commits

Author SHA1 Message Date
Thomas Gleixner ec8f24b7fa treewide: Add SPDX license identifier - Makefile/Kconfig
Add SPDX license identifiers to all Make/Kconfig files which:

 - Have no license information of any form

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:46 +02:00
Linus Torvalds a13f950ef1 Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer
2019-05-19 11:11:20 -07:00
Olof Johansson 7a0c4c1708 Merge branch 'fixes' into arm/soc
Merge in a few pending fixes from pre-5.1 that didn't get sent in:

MAINTAINERS: update arch/arm/mach-davinci
ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect
ARM: dts: imx6q-logicpd: Reduce inrush current on USBH1
ARM: dts: imx6q-logicpd: Reduce inrush current on start
ARM: dts: imx: Fix the AR803X phy-mode
ARM: dts: sun8i: a33: Reintroduce default pinctrl muxing
arm64: dts: allwinner: a64: Rename hpvcc-supply to cpvdd-supply
ARM: sunxi: fix a leaked reference by adding missing of_node_put
ARM: sunxi: fix a leaked reference by adding missing of_node_put

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-05-15 22:51:48 -07:00
Alexandre Belloni 2f982703bd clocksource/drivers/timer-atmel-pit: Rework Kconfig option
Allow building the PIT driver when COMPILE_TEST is enabled. Also remove its
default value so it can be disabled.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-05-02 21:55:58 +02:00
Alexandre Belloni 6275f4947e clocksource/drivers/tcb_clksrc: Move Kconfig option
Move the ATMEL_TCB_CLKSRC option to drivers/clocksource and make it silent
if COMPILE_TEST is not selected.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-05-02 21:55:58 +02:00
David Abdurachmanov dfc82faad7 clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
This is only used on arm and arm64 platforms. Add COMPILE_TEST option.

Tested with 5.1-rc3+ on Fedora/RISCV. CONFIG_ARM_TIMER_SP804 no more shows
up in riscv config.

Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-05-02 21:55:58 +02:00
Linus Walleij 13e0b4059b clocksource/drivers/ixp4xx: Add driver
This adds a new slightly rewritten timer driver for the
Intel IXP4xx clocksource, clockevent and delay timer.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-23 16:02:13 +02:00
Arnd Bergmann 99834eead2 clocksource/drivers/npcm: select TIMER_OF
When this is disabled, we get a link failure:

drivers/clocksource/timer-npcm7xx.o: In function `npcm7xx_timer_init':
timer-npcm7xx.c:(.init.text+0xf): undefined reference to `timer_of_init'

Fixes: 1c00289ecd ("clocksource/drivers/npcm: Add NPCM7xx timer driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-04-11 22:13:43 +02:00
Linus Torvalds 64b1b217f1 ARM: New SoC family support
Two new SoC families are added this time.
 
 Sugaya Taichi submitted support for the Milbeaut SoC family from
 Socionext and explains:
 
  "SC2000 is a SoC of the Milbeaut series. equipped with a DSP optimized for
   computer vision. It also features advanced functionalities such as 360-degree,
   real-time spherical stitching with multi cameras, image stabilization for
   without mechanical gimbals, and rolling shutter correction. More detail is
   below:
   https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"
 
 Interestingly, this one has a history dating back to older chips
 made by Socionext and previously Matsushita/Panasonic based on their
 own mn10300 CPU architecture that was removed from the kernel last year.
 
 Manivannan Sadhasivam adds support for another SoC family, this is the
 Bitmain BM1880 chip used in the Sophon Edge TPU developer board.
 The chip is intended for Deep Learning applications, and comes
 with dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
 microcontroller core to control the tensor unit.
 For the moment, the TPU is not accessible in mainline Linux, so
 we treat it as a generic Arm SoC.
 More information is available at https://www.sophon.ai/
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJcf9USAAoJEGCrR//JCVIn8M8P/1+wpy+9PZynYOqIZvTAR0Pr
 wqZD20FIjzbEMBpbSMWpOSxg+KbSuf+K1s+1lF6hAGry5UW8CVgZ7DMQ2DyBZfzN
 NEcJ1MfchN1AblpD4L76C7PzLR4ZbmNHmXaGX5KQ3ItXFX50TI+PBNdlRMho1y2P
 NGD8SLD1K+erfGyx6CHY+Wf6el25I7tP739HZGvZfMR1SDSKp73fwbjmBBg8vg7/
 2kIwjU7msgtIh4xAgNnZ7+uNUovi04ibDpQnOMta4Urdc9WBJPVQrTmrNJU0loJr
 bffhrrK4adZgp40gtjajCqPR6F96shyZ2G7nYxe53FGE4whSsMCZuGb5aXJ9OtZq
 ez0w3Vy16+2uLLA55xVGgcsOv/4pwXnxuVnfw4D5lonU8Q5bbh5pBTVnvV6lFOea
 IOLaEcfwBCLKMAkZ//eHn9PIGg3RBko4MZniJwb+WLbHXWR+MriQ4+Pb+cvugOAo
 ky4I9iU/XAmUfJxVC1ShHZrzgz2kEoZXCsX0yqXR1eG4o1Ztbftrs4UOyvTxeqxl
 lvLXg3b0SDA5QBwQHUxL0G9HTqm4LdMs3lg98kI05gWofz6Bmk1aEi7U4uguhGKf
 KafuUZ6snVF5KGJAI745Q4IkLKelxjBymLEi+FVKk6y0KAejQXuSMpgXwC1SnIN3
 M69uqcDP+ICqCgDbwWCx
 =HQS8
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM new SoC family support from Arnd Bergmann:
 "Two new SoC families are added this time.

  Sugaya Taichi submitted support for the Milbeaut SoC family from
  Socionext and explains:

    "SC2000 is a SoC of the Milbeaut series. equipped with a DSP
     optimized for computer vision. It also features advanced
     functionalities such as 360-degree, real-time spherical stitching
     with multi cameras, image stabilization for without mechanical
     gimbals, and rolling shutter correction. More detail is below:

       https://www.socionext.com/en/products/assp/milbeaut/SC2000.html"

  Interestingly, this one has a history dating back to older chips made
  by Socionext and previously Matsushita/Panasonic based on their own
  mn10300 CPU architecture that was removed from the kernel last year.

  Manivannan Sadhasivam adds support for another SoC family, this is the
  Bitmain BM1880 chip used in the Sophon Edge TPU developer board.

  The chip is intended for Deep Learning applications, and comes with
  dual-core Arm Cortex-A53 to run Linux as well as a RISC-V
  microcontroller core to control the tensor unit. For the moment, the
  TPU is not accessible in mainline Linux, so we treat it as a generic
  Arm SoC.

  More information is available at

       https://www.sophon.ai/"

* tag 'armsoc-newsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: add ARCH_MILBEAUT and ARCH_MILBEAUT_M10V
  ARM: configs: Add Milbeaut M10V defconfig
  ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
  clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
  dt-bindings: timer: Add Milbeaut M10V timer description
  ARM: milbeaut: Add basic support for Milbeaut m10v SoC
  dt-bindings: Add documentation for Milbeaut SoCs
  dt-bindings: arm: Add SMP enable-method for Milbeaut
  dt-bindings: sram: milbeaut: Add binding for Milbeaut smp-sram
  MAINTAINERS: Add entry for Bitmain SoC platform
  arm64: dts: bitmain: Add Sophon Egde board support
  arm64: dts: bitmain: Add BM1880 SoC support
  arm64: Add ARCH_BITMAIN platform
  dt-bindings: arm: Document Bitmain BM1880 SoC
2019-03-06 10:15:42 -08:00
Sugaya Taichi b58f28f306 clocksource/drivers/timer-milbeaut: Introduce timer for Milbeaut SoCs
Add timer driver for Milbeaut SoCs series.

The timer has two 32-bit width down counters, one of which is configured
as a clockevent device and the other is configured as a clock source.

Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-03-01 15:18:27 +01:00
Joseph Lo b4822dc756 clocksource/drivers/tegra: Add Tegra210 timer support
Add support for the Tegra210 timer that runs at oscillator clock
(TMR10-TMR13). We need these timers to work as clock event device and to
replace the ARMv8 architected timer due to it can't survive across the
power cycle of the CPU core or CPUPORESET signal. So it can't be a wake-up
source when CPU suspends in power down state.

Also convert the original driver to use timer-of API.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-02-23 12:13:45 +01:00
Samuel Holland c950ca8c35 clocksource/drivers/arch_timer: Workaround for Allwinner A64 timer instability
The Allwinner A64 SoC is known[1] to have an unstable architectural
timer, which manifests itself most obviously in the time jumping forward
a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a
timer frequency of 24 MHz, implying that the time went slightly backward
(and this was interpreted by the kernel as it jumping forward and
wrapping around past the epoch).

Investigation revealed instability in the low bits of CNTVCT at the
point a high bit rolls over. This leads to power-of-two cycle forward
and backward jumps. (Testing shows that forward jumps are about twice as
likely as backward jumps.) Since the counter value returns to normal
after an indeterminate read, each "jump" really consists of both a
forward and backward jump from the software perspective.

Unless the kernel is trapping CNTVCT reads, a userspace program is able
to read the register in a loop faster than it changes. A test program
running on all 4 CPU cores that reported jumps larger than 100 ms was
run for 13.6 hours and reported the following:

 Count | Event
-------+---------------------------
  9940 | jumped backward      699ms
   268 | jumped backward     1398ms
     1 | jumped backward     2097ms
 16020 | jumped forward       175ms
  6443 | jumped forward       699ms
  2976 | jumped forward      1398ms
     9 | jumped forward    356516ms
     9 | jumped forward    357215ms
     4 | jumped forward    714430ms
     1 | jumped forward   3578440ms

This works out to a jump larger than 100 ms about every 5.5 seconds on
each CPU core.

The largest jump (almost an hour!) was the following sequence of reads:
    0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000

Note that the middle bits don't necessarily all read as all zeroes or
all ones during the anomalous behavior; however the low 10 bits checked
by the function in this patch have never been observed with any other
value.

Also note that smaller jumps are much more common, with backward jumps
of 2048 (2^11) cycles observed over 400 times per second on each core.
(Of course, this is partially explained by lower bits rolling over more
frequently.) Any one of these could have caused the 95 year time skip.

Similar anomalies were observed while reading CNTPCT (after patching the
kernel to allow reads from userspace). However, the CNTPCT jumps are
much less frequent, and only small jumps were observed. The same program
as before (except now reading CNTPCT) observed after 72 hours:

 Count | Event
-------+---------------------------
    17 | jumped backward      699ms
    52 | jumped forward       175ms
  2831 | jumped forward       699ms
     5 | jumped forward      1398ms

Further investigation showed that the instability in CNTPCT/CNTVCT also
affected the respective timer's TVAL register. The following values were
observed immediately after writing CNVT_TVAL to 0x10000000:

 CNTVCT             | CNTV_TVAL  | CNTV_CVAL          | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
 0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000
 0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000
 0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000
 0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000

The pattern of errors in CNTV_TVAL seemed to depend on exactly which
value was written to it. For example, after writing 0x10101010:

 CNTVCT             | CNTV_TVAL  | CNTV_CVAL          | CNTV_TVAL Error
--------------------+------------+--------------------+-----------------
 0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000
 0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000
 0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000
 0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000
 0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000
 0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000

I was also twice able to reproduce the issue covered by Allwinner's
workaround[4], that writing to TVAL sometimes fails, and both CVAL and
TVAL are left with entirely bogus values. One was the following values:

 CNTVCT             | CNTV_TVAL  | CNTV_CVAL
--------------------+------------+--------------------------------------
 0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past)
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>

========================================================================

Because the CPU can read the CNTPCT/CNTVCT registers faster than they
change, performing two reads of the register and comparing the high bits
(like other workarounds) is not a workable solution. And because the
timer can jump both forward and backward, no pair of reads can
distinguish a good value from a bad one. The only way to guarantee a
good value from consecutive reads would be to read _three_ times, and
take the middle value only if the three values are 1) each unique and
2) increasing. This takes at minimum 3 counter cycles (125 ns), or more
if an anomaly is detected.

However, since there is a distinct pattern to the bad values, we can
optimize the common case (1022/1024 of the time) to a single read by
simply ignoring values that match the error pattern. This still takes no
more than 3 cycles in the worst case, and requires much less code. As an
additional safety check, we still limit the loop iteration to the number
of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods.

For the TVAL registers, the simple solution is to not use them. Instead,
read or write the CVAL and calculate the TVAL value in software.

Although the manufacturer is aware of at least part of the erratum[4],
there is no official name for it. For now, use the kernel-internal name
"UNKNOWN1".

[1]: https://github.com/armbian/build/commit/a08cd6fe7ae9
[2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/
[3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26
[4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272

Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2019-02-23 12:13:45 +01:00
Manivannan Sadhasivam 7f83a13279 clocksource/drivers/rda: Add clock driver for RDA8810PL SoC
Add clock driver for RDA Micro RDA8810PL SoC supporting OSTIMER
and HWTIMER.

RDA8810PL has two independent timers: OSTIMER (56 bit) and HWTIMER
(64 bit). Each timer provides optional interrupt support. In this
driver, OSTIMER is used for clockevents and HWTIMER is used for
clocksource.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18 22:22:23 +01:00
Anup Patel 92e0d143fd clocksource/drivers/riscv_timer: Provide the sched_clock
Currently, we don't have a sched_clock registered for RISC-V systems.
This means Linux time keeping will use jiffies (running at HZ) as the
default sched_clock.

To avoid this, we explicity provide sched_clock using RISC-V rdtime
instruction (similar to riscv_timer clocksource).

Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18 22:22:23 +01:00
Alexey Brodkin bf287607c8 clocksource/drivers/arc_timer: Utilize generic sched_clock
It turned out we used to use default implementation of sched_clock()
from kernel/sched/clock.c which was as precise as 1/HZ, i.e.
by default we had 10 msec granularity of time measurement.

Now given ARC built-in timers are clocked with the same frequency as
CPU cores we may get much higher precision of time tracking.

Thus we switch to generic sched_clock which really reads ARC hardware
counters.

This is especially helpful for measuring short events.
That's what we used to have:
------------------------------>8------------------------
$ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null

 Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello':

         10.000000      task-clock (msec)         #    2.832 CPUs utilized
                 1      context-switches          #    0.100 K/sec
                 1      cpu-migrations            #    0.100 K/sec
                63      page-faults               #    0.006 M/sec
           3049480      cycles                    #    0.305 GHz
           1091259      instructions              #    0.36  insn per cycle
            256828      branches                  #   25.683 M/sec
             27026      branch-misses             #   10.52% of all branches

       0.003530687 seconds time elapsed

       0.000000000 seconds user
       0.010000000 seconds sys
------------------------------>8------------------------

And now we'll see:
------------------------------>8------------------------
$ perf stat /bin/sh -c /root/lmbench-master/bin/arc/hello > /dev/null

 Performance counter stats for '/bin/sh -c /root/lmbench-master/bin/arc/hello':

          3.004322      task-clock (msec)         #    0.865 CPUs utilized
                 1      context-switches          #    0.333 K/sec
                 1      cpu-migrations            #    0.333 K/sec
                63      page-faults               #    0.021 M/sec
           2986734      cycles                    #    0.994 GHz
           1087466      instructions              #    0.36  insn per cycle
            255209      branches                  #   84.947 M/sec
             26002      branch-misses             #   10.19% of all branches

       0.003474829 seconds time elapsed

       0.003519000 seconds user
       0.000000000 seconds sys
------------------------------>8------------------------

Note how much more meaningful is the second output - time spent for
execution pretty much matches number of cycles spent (we're runnign
@ 1GHz here).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18 22:22:23 +01:00
Anson Huang df181e3828 clocksource/drivers/imx-gpt: Add support for ARM64
This patch allows building and compile-testing the i.MX GPT driver
also for ARM64. The delay_timer is only supported on ARMv7.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18 22:22:23 +01:00
Linus Walleij 85b6fcadcf clocksource/drivers/ux500: Drop Ux500 custom SCHED_CLOCK
The two drivers used for Ux500 sched_clock use two Kconfig
symbols to select which of the two gets used as sched_clock.

This isn't right: the workaround is trying to make sure that
the NONSTOP timer is used for sched_clock in order to keep
that clock ticking consistently over a suspend/resume
cycle. (Otherwise sched_clock simply stops during suspend
and continues after resume).

This will notably affect any timetstamped debug prints,
so that they show the absolute number of seconds since the
system was booted and does not loose wall-clock time during
suspend and resume as if time stood still.

The real way to fix this problem is to make sched_clock
take advantage of any NONSTOP clock source on the system
and adjust accordingly, not to try to work around this by
using a different sched_clock depending on what system
we are compiling for. This can solve the problem for
everyone instead of providing a local solution.

Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-12-18 22:22:23 +01:00
Guo Ren 33745c3cc5 clocksource/drivers/c-sky: Add gx6605s SOC system timer
The driver is for gx6605s SOC system timer and there are two
same timers in gx6605s. We use one for clkevt and another one for
clksrc.

The timer is mmio map to access, so we need give mmio address in dts.

The counter at 0x0  offset is clock event.
The counter at 0x40 offset is clock source.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:41:12 +01:00
Guo Ren a7ad38b0dd clocksource/drivers/c-sky: Add C-SKY SMP timer
The driver is for C-SKY SMP timer. It only supports oneshot event
and 32bit overflow for clocksource. Per cpu core has one timer and
all timers share one clock-counter-input from the same clocksource.

This use mfcr&mtcr instructions to access the regs.

Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-11-02 19:39:54 +01:00
Palmer Dabbelt 62b0194368
clocksource: new RISC-V SBI timer driver
The RISC-V ISA defines a per-hart real-time clock and timer, which is
present on all systems.  The clock is accessed via the 'rdtime'
pseudo-instruction (which reads a CSR), and the timer is set via an SBI
call.

Contains various improvements from Atish Patra <atish.patra@wdc.com>.

Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
[hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(),
 minor cleanups, merged  hotplug cpu support and other improvements
 from Atish]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-08-13 08:31:31 -07:00
Chunyan Zhang 8a1ece26d3 clocksource/drivers/sprd: Fix Kconfig dependency
SPRD arch doesn't select SPRD_TIMER, so this config would not
appear even if ARCH_SPRD is set but COMPILE_TEST not.

Fix the dependency of this config with SPRD arch, and set a
default value for it, also leave other choices for EXPERT.

Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-05-18 22:53:08 +02:00
Linus Torvalds d95c884439 Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull missed timer updates from Thomas Gleixner:
 "This is a branch which got forgotten during the merge window, but it
  contains only fixes and hardware enablement. No fundamental changes.

   - Various fixes for the imx-tpm clocksource driver

   - A new timer driver for the NCPM7xx SoC family"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/imx-tpm: Add different counter width support
  clocksource/drivers/imx-tpm: Correct some registers operation flow
  clocksource/drivers/imx-tpm: Fix typo of clock name
  dt-bindings: timer: tpm: fix typo of clock name
  clocksource/drivers/npcm: Add NPCM7xx timer driver
  dt-binding: timer: document NPCM7xx timer DT bindings
2018-04-16 12:44:03 -07:00
Linus Torvalds 167569343f ARM: SoC platform updates for 4.17
This release brings up a new platform based on the old ARM9 core: the
 Nuvoton NPCM is used as a baseboard management controller, competing
 with the better known ASpeed AST2xx series.
 
 Another important change is the addition of ARMv7-A based chips
 in mach-stm32. The older parts in this platform are ARMv7-M based
 microcontrollers, now they are expanding to general-purpose workloads.
 
 The other changes are the usual defconfig updates to enable additional
 drivers, lesser bugfixes. The largest updates as often are the ongoing
 OMAP cleanups, but we also have a number of changes for the older
 PXA and davinci platforms this time.
 
 For the Renesas shmobile/r-car platform, some new infrastructure
 is needed to make the watchdog work correctly.
 
 Supporting Multiprocessing on Allwinner A80 required a significant
 amount of new code, but is not doing anything unexpected.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJaxibSAAoJEGCrR//JCVInPwcP/2ZdLMXXXaJBM+rCRPhT+vR1
 FsKqcTCC5RHbVcKW+N54nmlsqofy2GadlmyfOdrFXtbf+Sm2dRNsDrHDOhvoPp37
 fwBd0wGw0PLjNE8SEPp/ldtFe11Dbg0WGBzJ4PAPJgt1W4hvW8//VzVW1XsiRrVc
 9SlZ66DwR95UQ5pwy+dfE8f9A/WW4XaMq0UHQ3/deQ/Te/64b/C6CJtT3W73WAlR
 83UHgkwq3WvI+hhvg4QX9H0Q6dcK2JLUWsAB0xnZP8Q8t30NdDpl61uZL0A4Mh9Y
 38lPhUjPUyUpsGrOttmMEQNzbAk4m/nzQxByYYmhkx3x+mlhjdA9KNavxDYVxXN2
 1tzz62wst8pLePqVt2UsFqsaruJGMuTIooOdc5iCjG1c2N2kQGdBsuOvLjYu9kV6
 XPTfvvAYkMo9rC0MbdPuobG+h/WrYHuc9SD2Mnt+kNaw1yJL08fWENjSuwP7kheb
 2A5jdAFNrGqgcrWMsQOw8eYYC7z7WojkLq0kHrBbwIlVD7KIZurv2fm/iVo4+xPH
 Gig5HuehMUtVYAf+Q1KWFlqS01fXMErt2pDGI5f1mNumXCB5kdWoSKbU8lOg03f8
 ZqBHlfly+QDMOx0qfkxFX+phHPWHTOC+45yHK2Xq+n9urXmQbzYZxTzq5zCu6jcm
 4yH0jaykoHODGNLIt50f
 =HD9V
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "This release brings up a new platform based on the old ARM9 core: the
  Nuvoton NPCM is used as a baseboard management controller, competing
  with the better known ASpeed AST2xx series.

  Another important change is the addition of ARMv7-A based chips in
  mach-stm32. The older parts in this platform are ARMv7-M based
  microcontrollers, now they are expanding to general-purpose workloads.

  The other changes are the usual defconfig updates to enable additional
  drivers, lesser bugfixes. The largest updates as often are the ongoing
  OMAP cleanups, but we also have a number of changes for the older PXA
  and davinci platforms this time.

  For the Renesas shmobile/r-car platform, some new infrastructure is
  needed to make the watchdog work correctly.

  Supporting Multiprocessing on Allwinner A80 required a significant
  amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
  arm: npcm: modify configuration for the NPCM7xx BMC.
  MAINTAINERS: update entry for ARM/berlin
  ARM: omap2: fix am43xx build without L2X0
  ARM: davinci: da8xx: simplify CFGCHIP regmap_config
  ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
  ARM: multi_v7_defconfig: add NXP FlexCAN IP support
  ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
  ARM: multi_v7_defconfig: add RN5T618 PMIC family support
  ARM: multi_v7_defconfig: add NXP graphics drivers
  ARM: multi_v7_defconfig: add GPMI NAND controller support
  ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
  ARM: multi_v7_defconfig: configure I2C driver built-in
  arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
  ARM: imx: fix imx6sll-only build
  ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
  ARM: mxs_defconfig: Re-sync defconfig
  ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
  ARM: imx_v4_v5_defconfig: Re-sync defconfig
  arm64: defconfig: enable stmmac ethernet to defconfig
  ARM: EXYNOS: Simplify code in coupled CPU idle hot path
  ...
2018-04-05 21:21:08 -07:00
Linus Torvalds f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Linus Torvalds c9297d2841 This tag contains the core nds32 Linux port(including interrupt controller
driver and timer driver), which has been through 7 rounds of review on mailing
 list.
 
 It is able to boot to shell and passes most LTP-2017 testsuites in nds32 AE3XX
 platform.
 Total Tests: 1901
 Total Skipped Tests: 618
 Total Failures: 78
 
 Copied below is the ChangeLog that contains the history of this patch set:
 Changes in v7:
  - Update cpu binding document to add "andestech,nds32v3" as fallback
  - Remove unnecessary configs of arch/nds32/Kconfig
  - Use GENERIC_CALIBRATE_DELAY
  - Add more help texts for minimum CPU type config
  - Update defconfig because of Kconfig changed and bug fixed
  - Move early_trap_init() declaration to nds32.h
  - Refine dma.c
  - Remove apply_relocate() in module.c and include <linux/moduleloader.h> to catch it
  - Add do_kernel_restart() in machine_restart()
  - Clean up setup.c to remove CONFIG_VGA_CONSOLE and some extern declaration functions
  - Add negative dependency for VGA_CONSOLE on nds32
  - Refine ptrace.c and arch/nds32/include/asm/ptrace.h
  - Refine syscall restart flow and arch/nds32/kernel/signal.c
  - Fix a bug in VDSO
  - Remove the handling for kernel code unaligned accessing
  - Add a description for unaligned access handling in git commit message.
  - Rebase to v4.16-rc1
  - Replace ACCESS_ONCE with READ_ONCE
  - Replace atomic_long_dec(&mm->nr_ptes) with mm_dec_nr_ptes(mm)
  - Remove print_symbol(%s) with printk(%pS)
  - Add bpf_perf_event.h
  - Remove init_stack and init_thread_info
 
 Changes in v6:
  - Refine naming for atl2c
  - Refine ae3xx.dts
  - Remove CONFIG_TIMER_ATCPIT100 in defconfig
  - Refine elf.h
  - Fix a vdso bug
  - Separate arch patchset and timer patchset
  - To select TIMER_OF in drivers/clocksource/Kconfig instead of arch/nds32/Kconfig
 
 Changes in v5:
  - Remove __NR__llseek  and sys_mmap()
  - Add a comment to explain that we don't have clocksource cycle counter in the CPU
  - Add volatile in iounmap()
  - Fix typo Featuretures to Features
  - Replace CPU_CACHE_NONALIASING with !CPU_CACHE_ALIASING
  - Fix a endian bug when we try to get val = of_get_property(cpu,"clock-frequency", NULL)
  - Add screen_info to fix the building error when CONFIG_ VGA_CONSOLE is enabled
  - Remove unnecessary msync()
  - Add depends on !64BIT || BROKEN for faraday Kconfig because the descriptor only supports 32bit
  - Add atl2c binding document
  - Remove unnecessary include headers
  - Fix a vector table bug. It placed wrong vector handlers for 2 exceptions.
  - Fix a vdso bug. It may encounter TLB multi-hit exception because we accidently set it as a global page.
  - Add proper isb and barrier after some cache operations
  - Fix a bug in system call restart flow. $r0 ~ $r5 does not be recovered before restarting system call
  - Fix the build errors for OpenRISC and SPARC because io.h changed.
  - Update ae3xx.dts to support atl2c.
 
 Changes in v4:
  - Add atcpit100 timer driver due to it include vdso implementations and sent
    them together with nds32 may help reviewer to review.
  - Update ae3xx.dts for atcpit100 clock setting and remove vdso settings.
  - To get cycle counter register by timer driver instead of dts.
  - Use "depends on NDS32 || COMPILE_TEST" in atcpit100 driver because it is needed for nds32 vdso
  - Update defconfig becasue kconfig rename from CONFIG_CLKSRC_ATCPIT100 to CONFIG_TIMER_ATCPIT100
  - Remove ag101p.dts because we are not yet ready for ag101p platform.
  - Update copyright style to SPDX-License-Identifier
  - Include <linux/uaccess.h> instead of <asm/uaccess.h>
  - Add local_irq_save()/local_irq_restore() to protect SR_TLB_VPN in update_mmu_cache().
  - Update cpu_dcache_inval_all implementation to make sure all level cache are writeback.
 
 Changes in v3:
  - Use arch's io.h instead of generic one
  - Add andestech-boards binding document
  - Update nds32/cpus.txt binding document
  - Remove atcpit100 timer drivers
  - Select NO_BOOTMEM and delete HAVE_MEMBLOCK_NODE_MAP
  - make CPU_BIG_ENDIAN and CPU_LITTLE_ENDIAN are dependent
  - Add cpu type to select HWZOL/CPU_CACHE_ALIASING
  - Change CPU_CACHE_NONALIASING to CPU_CACHE_ALIASING
  - Remove bootarg from device tree script
  - Update ag101p.dts and ae3xx.dts for correct board name.
  - Clear and simplify defconfig
  - Implement L2C_R_REG/ L2C_W_REG with readl/writel instead of __raw_readl/__raw_writel for endian save
  - Remove early_init_dt_add_memory_arch/early_init_dt_alloc_memory_arch to use the generic ones
  - Refine devicetree.c
  - Fix bug https://lkml.kernel.org/r/1499782590-31366-1-git-send-ema...
  - Refine irqchip/irq-ativic32.c implementations
  - Add COMPILE_TEST in drivers/net/ethernet/faraday/Kconfig
  - Refine cache operations
  - Add CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS
  - Fix ZERO_PAGE define
  - Remove SA_RESTORER
  - Remove uapi/asm/signal.h
  - Redefine user_pt_regs
  - Remove spinlock.h
  - Remove __ARCH_WANT_RENAMEAT and __ARCH_WANT_SYSCALL_OFF_T from unistd.h
  - Remove set_fs(USER_DS) because flush_old_exec() will do this setting
  - Replace in_atomic() with faulthandler_disabled()
  - Add barrier.h
  - Select COMMON_CLK
  - Add clk_pll in dts
  - Add of_clk_init() in arch/nds32/kernel/time.c
 
 Changes in v2:
  - Set GENERIC_CALIBRATE_DELAY default n
  - Add earlycon support
  - Remove earlyprintk
  - Add CPU_BIG_ENDIAN, CPU_LITTLE_ENDIAN support
  - Refine unalignment access exception handler
  - Add VMSPLIT support
  - Use only one defconfig
  - Change interrupt-cells from 2 to 1
  - Refine andestech cpu names in bindings/nds32/cpus.txt
  - Get clock frequency in dts because fpga bitmap doesn't include this feature
  - Update MAINTAINERS for bindings
  - Remove unused configs in Kconfig
  - Refine device tree scripts
  - Refine coding style
  - Use generic ioremap_nocache
  - Remove L2CC_PA_BASE define and its codes in head.S. It will be moved to bootloader.
  - Set PHYS_OFFSET to 0x0 instead of CONFIG_MEMORY_START
  - Remove unused macros
  - Simplify cpu_cache_* API
  - Change __asm__ __volatile__ to asm volatile
  - Refine uaccess.h
  - Remove unused/deprecated syscall
  - Use generic posix_types.h
  - Remove arch_trace_hardirqs_on/arch_trace_hardirqs_off
  - Fix bug of restart syscall
  - Refine syscall implementations
  - Use IS_ENABLED to replace ifdef as possible
  - Remove device_initcall(nds32_device_probe)
  - Refine vdso implementations
  - Refine copy_from_user()/copy_to_user()/clear_user()/get_user()/memmove()/memcpy()
  - Refine ioremap.c
  - Refine irq-ativic32.c
  - Fix a bug of earlycon.c
  - Export ioremap_nocache/ioremap_uc/ioremap_wc/ioremap_wt
  - Add atcpit100 driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.17 (GNU/Linux)
 
 iQIcBAABAgAGBQJawZ28AAoJEHfB0l0b2JxExKYQAJ7btaPeIplIndrphlTQkfzW
 d1AhVBhwAlvqsOcFf+kwVIqOnfcLCtzVvgc63qc6mAroDZKcd+uuqOtkC801b33i
 jxcfSX802PciT3VhE8xz9OWFY9D3in/UCBhGe2OvY/cD/eC34gZhUqJhML/ioR5q
 DNPvua6lgYIN9VrFds19MjRzl7RwDBqNccQoFTXWc9Hl1Vs0YdKdbkOz0IWNtoLQ
 crP0v/UuHMC++WdU+MvDIEFqNVuXikg/NA+odPIbp3eF3xcmQBM0blWAi37eOKFo
 rzTw7TKtL8xObjvhyzx3aYFKPpLBfuYwk8onoZlthlqcwFClZy4lzdDdDxJhKiJ6
 5hilzCSqEWXB9osQsrWgAuK1rNRvroChIp6/rcdGAq33mTPLVydx7hSKELhE7wuN
 UUaiJSSNRG1ZrR8tkccQpaRBjJ/gfXWGC3ys723oWz8A4bDzMkvZVzdOGOEZ+CsI
 w4HKNHLeY50wztV6dDSiVPhvUXQjBH9qd2zVHlutbfulPI/XNkGRfWpEGVT1zD4y
 pO3aHVJfsv+8aeyVBcXyN74O34a9HYa7811v7V5RI+uftdPhkzOwxuMQVMMJPe3s
 4u4NglP7fekeWyDGCXFKOGoVOuCAUPHuzBUCFjL/cStHjrkBGVQvL1I925sJNabu
 IatFh62x8Ez4m2hIf5fg
 =J/YF
 -----END PGP SIGNATURE-----

Merge tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux

Pull nds32 architecture support from Greentime Hu:
 "This contains the core nds32 Linux port (including interrupt
  controller driver and timer driver), which has been through seven
  rounds of review on mailing list.

  It is able to boot to shell and passes most LTP-2017 testsuites in
  nds32 AE3XX platform:

    Total Tests: 1901
    Total Skipped Tests: 618
    Total Failures: 78"

Reviewed-by: Arnd Bergmann <arnd@arndb.de>

* tag 'nds32-for-linus-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: (44 commits)
  nds32: To use the generic dump_stack()
  nds32: fix building failed if using elf toolchain.
  nios2: add ioremap_nocache declaration before include asm-generic/io.h.
  nds32: fix building failed if using older version gcc.
  dt-bindings: timer: Add andestech atcpit100 timer binding doc
  clocksource/drivers/atcpit100: VDSO support
  clocksource/drivers/atcpit100: Add andestech atcpit100 timer
  net: faraday add nds32 support.
  irqchip: Andestech Internal Vector Interrupt Controller driver
  dt-bindings: interrupt-controller: Andestech Internal Vector Interrupt Controller
  dt-bindings: nds32 SoC Bindings
  dt-bindings: nds32 L2 cache controller Bindings
  dt-bindings: nds32 CPU Bindings
  MAINTAINERS: Add nds32
  nds32: Build infrastructure
  nds32: defconfig
  nds32: Miscellaneous header files
  nds32: Device tree support
  nds32: Generic timers support
  nds32: Loadable modules
  ...
2018-04-02 19:41:08 -07:00
Tomer Maimon 1c00289ecd clocksource/drivers/npcm: Add NPCM7xx timer driver
Add Nuvoton BMC NPCM7xx timer driver.

The clocksource Enable 24-bit TIMER0 and TIMER1 counters,
while TIMER0 serve as clockevent and TIMER1 serve as clocksource.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@xxxxxxxxxx>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-03-30 22:44:09 +02:00
Masahiro Yamada bd2746f09e clocksource/atmel-st: Add 'depends on HAS_IOMEM' to fix unmet dependency
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.

Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".

Add the proper dependency to the ATMEL_ST config.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
2018-03-09 11:11:58 +01:00
James Hogan b79a732504
clocksource: Remove metag generic timer driver
Now that arch/metag/ has been removed, remove the metag generic
per-thread timer driver. It is of no value without the architecture
code.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-metag@vger.kernel.org
2018-02-23 14:30:20 +00:00
Keerthy af04aa856e ARM: OMAP: Move dmtimer driver out of plat-omap to drivers under clocksource
Move the dmtimer driver out of plat-omap to clocksource.
So that non-omap devices also could use this.

No Code changes done to the driver file only renamed to timer-ti-dm.c.
Also removed the config dependencies for OMAP_DM_TIMER.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
[tony@atomide.com: add select omap_dm_timer for omap16xx]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-22 10:53:52 -08:00
Rick Chen 35dbb74aa7 clocksource/drivers/atcpit100: Add andestech atcpit100 timer
ATCPIT100 is often used on the Andes architecture,
This timer provide 4 PIT channels. Each PIT channel is a
multi-function timer, can be configured as 32,16,8 bit timers
or PWM as well.

For system timer it will set channel 1 32-bit timer0 as clock
source and count downwards until underflow and restart again.

It also set channel 0 32-bit timer0 as clock event and count
downwards until condition match. It will generate an interrupt
for handling periodically.

Signed-off-by: Rick Chen <rickchen36@gmail.com>
Signed-off-by: Greentime Hu <green.hu@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Add andestech atcpit100 timer
2018-02-22 10:44:36 +08:00
Benjamin Gaignard d04af4908a clocksource/drivers/stm32: Convert the driver to timer_of primitives
Convert the driver to use the timer_of() helpers. This allows the removal of
a custom private structure, factors out and simplifies the code.

[Daniel Lezcano]: Respin against the critical fix patch and massaged the changelog.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-12-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:25 +01:00
Baolin Wang 067bc91447 clocksource/drivers/spreadtrum: Add timer driver for the Spreadtrum SC9860 platform
The Spreadtrum SC9860 platform will use the architected timers as local
clock events, but we also need a broadcast timer device to wake up the
CPUs when the CPUs are in sleep mode.

The Spreadtrum timer can support 32-bit or 64-bit counters, as well as
supporting period mode or one-shot mode.

Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-8-git-send-email-daniel.lezcano@linaro.org
[ Minor readability edits. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-01-08 17:57:24 +01:00
Arnd Bergmann 2f8a26c166 clocksource: Improve GENERIC_CLOCKEVENTS dependency
We regularly run into build errors when a clocksource driver selects
CONFIG_TIMER_OF while CONFIG_GENERIC_CLOCKEVENTS is disabled:

In file included from drivers/clocksource/timer-of.c:25:0:
drivers/clocksource/timer-of.h:35:28: error: field 'clkevt' has incomplete type

At the moment, three drivers can show this behavior: ARMV7M_SYSTICK,
CLKSRC_ST_LPC and CLKSRC_NPS. We could add further dependencies as we did
many times, but I have looked a little bit more at what architectures
are left that don't use GENERIC_CLOCKEVENTS, and this shows that there
is a better solution.

On arch/frv and arch/ia64, we never select CONFIG_GENERIC_CLOCKEVENTS
and we also don't use ARCH_USES_GETTIMEOFFSET, which would
block the clocksource Kconfig menu. On m68k, some platforms use
CONFIG_GENERIC_CLOCKEVENTS, some use ARCH_USES_GETTIMEOFFSET, and some
use neither of them. The good news is that there is no configuration that
does not set CONFIG_GENERIC_CLOCKEVENTS but that wants to enable any of
the Kconfig symbols in the menu, so we can simply replace the dependency
with the stricter one. While in theory one could have a clocksource
driver without the clockevent infrastructure, this seems unlikely
to be relevant in the future any more.

We can probably drop some of the other dependencies as well now,
e.g. there should generally be no reason to depend on CONFIG_ARM
unless the driver uses architecture specific assembly.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-10-19 23:49:03 +02:00
Linus Torvalds dd90cccffc Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
 "A rather small update for the time(r) subsystem:

   - A new clocksource driver IMX-TPM

   - Minor fixes to the alarmtimer facility

   - Device tree cleanups for Renesas drivers

   - A new kselftest and fixes for the timer related tests

   - Conversion of the clocksource drivers to use %pOF

   - Use the proper helpers to access rlimits in the posix-cpu-timer
     code"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Ensure RTC module is not unloaded
  clocksource: Convert to using %pOF instead of full_name
  clocksource/drivers/bcm2835: Remove message for a memory allocation failure
  devicetree: bindings: Remove deprecated properties
  devicetree: bindings: Remove unused 32-bit CMT bindings
  devicetree: bindings: Deprecate property, update example
  devicetree: bindings: r8a73a4 and R-Car Gen2 CMT bindings
  devicetree: bindings: R-Car Gen2 CMT0 and CMT1 bindings
  devicetree: bindings: Remove sh7372 CMT binding
  clocksource/drivers/imx-tpm: Add imx tpm timer support
  dt-bindings: timer: Add nxp tpm timer binding doc
  posix-cpu-timers: Use dedicated helper to access rlimit values
  alarmtimer: Fix unavailable wake-up source in sysfs
  timekeeping: Use proper timekeeper for debug code
  kselftests: timers: set-timer-lat: Add one-shot timer test cases
  kselftests: timers: set-timer-lat: Tweak reporting when timer fires early
  kselftests: timers: freq-step: Fix build warning
  kselftests: timers: freq-step: Define ADJ_SETOFFSET if device has older kernel headers
2017-09-04 13:06:34 -07:00
Dong Aisheng 059ab7b82e clocksource/drivers/imx-tpm: Add imx tpm timer support
IMX Timer/PWM Module (TPM) supports both timer and pwm function while
this patch only adds the timer support. PWM would be added later.

The TPM counter, compare and capture registers are clocked by an
asynchronous clock that can remain enabled in low power modes.

NOTE: We observed in a very small probability, the bus fabric
contention between GPU and A7 may results a few cycles delay
of writing CNT registers which may cause the min_delta event got
missed, so we need add a ETIME check here in case it happened.

Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-29 11:07:56 +02:00
Matt Redfearn 599dc457c7 clocksource/drivers/Kconfig: Fix CLKSRC_PISTACHIO dependencies
In v4.13, CLKSRC_PISTACHIO can select TIMER_OF on architectures without
GENERIC_CLOCKEVENTS, resulting in a struct clock_event_device missing
some required features and build breakage compiling timer_of.c. One of
the symbols selecting TIMER_OF is CLKSRC_PISTACHIO, so add the
dependency on GENERIC_CLOCKEVENTS.

Thanks to kbuild test robot for finding this error
(https://lkml.org/lkml/2017/7/16/249)

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-08-11 12:53:29 +02:00
Linus Torvalds e854711291 ARM: SoC driver updates
- New SoC specific drivers
   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware
   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).
 
 - Reset subsystem, merged through arm-soc by tradition:
   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini SoCs
   - Various subsystem-wide cleanups
 
 - Updates for existing SoC-specific drivers
   - TI GPMC (General Purpose Memory Controller)
   - Mediatek "scpsys" system controller support for MT6797
   - Broadcom "brcmstb_gisb" bus arbitrer
   - ARM SCPI firmware
   - Renesas "SYSC" system controller
 
 One more driver update was submitted for the Freescale/NXP DPAA
 data path acceleration that has previously been used on PowerPC
 chips. I ended up postponing the merge until some API questions
 for its unusual MMIO access are resolved.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAWVpDFmCrR//JCVInAQKoihAAosgC3+3IHppOhHid+HepkOcp2teyKknw
 42fSXVpTdfWa8Oe7q80Kzmz2CPNfFq2SzHz6oXb9WCcDFqSGr0b9aSE7NnksRjTf
 2euHVJ4MnJpkRewvorRmcpK8dPXDcHwEw/8hU3yZtJUGI0IKtlrqXis+evgkz9cn
 YDynuVdAZgZiEfiNeSeadyNLcxaQCc3x9ovvsBXxBa1/x1pfeRnTbp+6hiHilCJu
 Szts/yAzZzZE9Jkf9dLKfNlsT6m2SgtjukqqOR+zHAhi7/BdTFSVUP6L8u7QjrR+
 +ijTICg8FMJGiWLAOe6ED2qZVByN92EJ2AGwriYlSles9ouoGfRkJ2rwxyjbete7
 avy0HP+PSBFXWdwbOcq8HX8CrbuBltagl5fkMokct6biWLLMshNZ33WWdQ6/DsM2
 b9mAAZuhbs0g1qWUBD3+q6qBytSuGme6Px6fMoVEc4GQ2YVFUQOoEfZOGKRv1U1o
 aMWGt/6qeF8SG288rYAnQ/TuYWpOLtksV6yhotA00HUHhkTCy0xVCdyWGZtNyKhG
 o/x4YnhWFzHsXmqKcR1sM7LzfZY/WNmbrOLvK6i83Z0P7QptqrdaLAylL3iSPEyX
 ZDUgExf6PYXkWIewc3KwC5sJjuD05z3ZCgIR+mCezwbuD+3Z2fOdjodY/VBZ74hq
 URcM/BqtuWE=
 =5L6n
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...
2017-07-04 14:47:47 -07:00
Daniel Lezcano 239751edad clocksource/drivers/sun4i: Switch to the timer-of common init
Previously a framework to factor out the drivers init function has been
merged.

Use this common framework in this driver, we get:

Before:

text    data     bss     dec   hex filename
1787     384      12    2183   887 drivers/clocksource/sun4i_timer.o

After:

text    data     bss     dec   hex filename
1407     512       0    1919   77f drivers/clocksource/sun4i_timer.o

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Chen-Yu Tsai <wens@csie.org>
2017-06-26 18:32:04 +02:00
Andreas Färber 4be78a86c5 clocksource: Add Owl timer
The Actions Semi S500 SoC provides four timers, 2Hz0/1 and 32-bit TIMER0/1.

Use TIMER0 as clocksource and TIMER1 as clockevents.

Based on LeMaker linux-actions tree.

An S500 datasheet can be found on the LeMaker Guitar pages:
http://www.lemaker.org/product-guitar-download-29.html

Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-06-18 21:19:48 +02:00
Daniel Lezcano dc11bae785 clocksource/drivers: Add timer-of common init routine
The different drivers are all using the same pattern when initializing.

 1. Get the base address
 2. Get the irq number
 3. Get the clock
 4. Prepare and enable the clock
 5. Get the rate
 6. Request an interrupt

Instead of repeating again and again these steps in all the drivers, let's
provide a common init routine to give the opportunity to factor all of them
out.

We can expect a significant kernel size improvement when the common routine
will be used in all the drivers.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-14 12:02:32 +02:00
Daniel Lezcano fa1bffab26 clocksource/drivers: Rename CLKSRC_ACPI to TIMER_ACPI
The config option name is now renamed to 'TIMER_ACPI' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 12:01:19 +02:00
Daniel Lezcano bb0eb050a5 clocksource/drivers: Rename CLKSRC_OF to TIMER_OF
The config option name is now renamed to 'TIMER_OF' for consistency with
the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-14 12:01:03 +02:00
Daniel Lezcano 8e0931022e Revert "clockevents: Add a clkevt-of mechanism like clksrc-of"
After discussing it, this feature is dropped as it is not considered
adequate:

	https://patchwork.kernel.org/patch/9639317/

There is no user of this macro yet, so there is no impact on the drivers.

This reverts commit 376bc27150.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-12 10:54:47 +02:00
Linus Walleij ec14ba1ec5 clocksource/drivers/fttmr010: Merge Moxa into FTTMR010
This merges the Moxa Art timer driver into the Faraday FTTMR010
driver and replaces all Kconfig symbols to use the Faraday
driver instead. We are now so similar that the drivers can
be merged by just adding a few lines to the Faraday timer.

Differences:

- The Faraday driver explicitly sets the counter to count
  upwards for the clocksource, removing the need for the
  clocksource core to invert the value.

- The Faraday driver also handles sched_clock()

On the Aspeed, the counter can only count downwards, so support
the timers in downward-counting mode as well, and flag the
Aspeed to use this mode. This mode was tested on the Gemini so
I have high hopes that it'll work fine on the Aspeed as well.

After this we have one driver for all three SoCs and a generic
Faraday FTTMR010 timer driver, which is nice.

Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-06-12 10:45:10 +02:00
Daniel Lezcano 6f9c89000c arm64 arch timer workaround series, including the base patches
that will also go via the arm64 tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAljnmH0VHG1hcmMuenlu
 Z2llckBhcm0uY29tAAoJECPQ0LrRPXpDkdMP/jMT8ICpKc8G/PD7ru/3dOV9BcFh
 XLB5dzg1sEkF2NtN6Bcgkl0sMLbr9uaGD2oK55Nf5ryooSCbDkNjOFSwPj5M+XVc
 bqOYnt0oOYv7LYoGwO9rqIr1z+z3+6ZHDafLCqNcyTsO1qHKNLFEE4DmsxuqrN7v
 tjyH6v42WBsXvCqAxAhsz/vFWPeKEM5Z4NdwoDrSb8syQZPBG/xUin6tOFZBM9fY
 tVyiVkpGKyfyfAlPBzoFtvA21Ur2m3wx9I/i8X5NDbAQwjPaHh8RVtRjO5M+5O7O
 jG/T+ixd/EBlIs89AgMKnv0Tycrm4zVzRMcam+5u89z/M+6V2ifobTTCgmzNDxGh
 iwAfOboJ2rEZxFHJfKvuj4bVnzO/PnOAx8R5DBn+1eAn1Ox4N1weXXpFaUV9HZtN
 4p61eDk5xhkRPoSAUnZz72YpsN/Rgz+DO5Fn3+DUzmaOxDJ8nEUCyy7+Ot5P6J0s
 lzxpbBjQFxse53t1DAYoWD5bH9mMMjVPIP/T4l6WJpO6/wfvwqti+fs5IhYYOKUc
 S/a6BKZA4g/ntLhb9QWs6Bc07yEvW1z61SCh7gQmZicMNVApx/KO/7jZqDJQNaZt
 +jY7IEoQnZN83tPiOzjWVpBJPBJqpy2mmfM4kA2luTO2KfDmT46Pf+wHF8b+U8bJ
 pH9VRViKv9fjLm31
 =WlYI
 -----END PGP SIGNATURE-----

Merge tag 'arch-timer-errata' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into clockevents/4.12

arm64 arch timer workaround series, including the base patches
that will also go via the arm64 tree.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-04-07 16:23:29 +02:00
Linus Walleij f5bf0ee4eb clocksource/drivers/gemini: Rename Gemini timer to Faraday
After some research it turns out that the "Gemini" timer is
actually a generic IP block from Faraday Technology named
FTTMR010, so as to not make things too confusing we need to
rename the driver and its symbols to make sense.

The implementation remains the same in this patch but we fix
the copy-paste error in the timer name "nomadik_mtu" as we're
at it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-04-07 16:23:08 +02:00
Alexander Kochetkov 5e0a39d0f7 clocksource/drivers/rockchip_timer: Implement clocksource timer
The clock supplying the arm-global-timer on the rk3188 is coming from the
the cpu clock itself and thus changes its rate everytime cpufreq adjusts
the cpu frequency making this timer unsuitable as a stable clocksource
and sched clock.

The rk3188, rk3288 and following socs share a separate timer block already
handled by the rockchip-timer driver. Therefore adapt this driver to also
be able to act as clocksource and sched clock on rk3188.

In order to test clocksource you can run following commands and check
how much time it take in real. On rk3188 it take about ~45 seconds.

    cpufreq-set -f 1.6GHZ
    date; sleep 60; date

In order to use the patch you need to declare two timers in the dts
file. The first timer will be initialized as clockevent provider
and the second one as clocksource. The clockevent must be from
alive subsystem as it used as backup for the local timers at sleep
time.

The patch does not break compatibility with older device tree files.
The older device tree files contain only one timer. The timer
will be initialized as clockevent, as expected.

rk3288 (and probably anything newer) is irrelevant to this patch,
as it has the arch timer interface. This patch may be useful
for Cortex-A9/A5 based parts.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-04-07 16:23:05 +02:00
Marc Zyngier fa8d815fac arm64: arch_timer: Workaround for Cortex-A73 erratum 858921
Cortex-A73 (all versions) counter read can return a wrong value
when the counter crosses a 32bit boundary.

The workaround involves performing the read twice, and to return
one or the other depending on whether a transition has taken place.

Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07 11:22:10 +01:00
Ding Tianhong bb42ca4740 clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum 161010101
Erratum Hisilicon-161010101 says that the ARM generic timer counter "has
the potential to contain an erroneous value when the timer value
changes". Accesses to TVAL (both read and write) are also affected due
to the implicit counter read. Accesses to CVAL are not affected.

The workaround is to reread the system count registers until the value
of the second read is larger than the first one by less than 32, the
system counter can be guaranteed not to return wrong value twice by
back-to-back read and the error value is always larger than the correct
one by 32. Writes to TVAL are replaced with an equivalent write to CVAL.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
[Mark: split patch, fix Kconfig, reword commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-08 00:14:04 +01:00
Ding Tianhong 16d10ef29f clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
Currently we have code inline in the arch timer probe path to cater for
Freescale erratum A-008585, complete with ifdeffery. This is a little
ugly, and will get worse as we try to add more errata handling.

This patch refactors the handling of Freescale erratum A-008585. Now the
erratum is described in a generic arch_timer_erratum_workaround
structure, and the probe path can iterate over these to detect errata
and enable workarounds.

This will simplify the addition and maintenance of code handling
Hisilicon erratum 161010101.

Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
[Mark: split patch, correct Kconfig, reword commit message]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2017-02-08 00:14:03 +01:00