Commit Graph

253 Commits

Author SHA1 Message Date
Linus Torvalds c207f3a431 Generialize powerpc's irq_host as irq_domain
This branch takes the PowerPC irq_host infrastructure (reverse mapping
 from Linux IRQ numbers to hardware irq numbering), generalizes it,
 renames it to irq_domain, and makes it available to all architectures.
 
 Originally the plan has been to create an all-new irq_domain
 implementation which addresses some of the powerpc shortcomings such
 as not handling 1:1 mappings well, but doing that proved to be far
 more difficult and invasive than generalizing the working code and
 refactoring it in-place.  So, this branch rips out the 'new'
 irq_domain and replaces it with the modified powerpc version (in a
 fully bisectable way of course).  It converts all users over to the
 new API and makes irq_domain selectable on any architecture.
 
 No architecture is forced to enable irq_domain, but the infrastructure
 is required for doing OpenFirmware style irq translations.  It will
 even work on SPARC even though SPARC has it's own mechanism for
 translating irqs at boot time.  MIPS, microblaze, embedded x86 and c6x
 are converted too.
 
 The resulting irq_domain code is probably still too verbose and can be
 optimized more, but that can be done incrementally and is a task for
 follow-on patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPZ1yiAAoJEEFnBt12D9kB4yIQAJvCfTPL65sCYVD6i9RnVHtR
 ahwddtd0AtT+UYLU8Xg2fZgVi6cmupDGnqkBixzZD3xxSTERqm7Snqa0ugklfeAi
 B6Zqf/K17H5hJNaoQ3fkNauow8m7ZYOeEH2vVUvkb3woWS9Wm7OGd+BvcIBgYSGe
 Aaoumhu7kDxFkii0qz3x/+kvsb6DRp2HtSPWj+APL/kNjdiO4JBOihtcc/lX6d47
 bsZLiEMzHUFV4ApJNwqmfDnf54oMrHmrRJxgQHIMjeJC5or9I3Do8wDGe/aTF5xO
 5GVpxCQsTlJMjTBWlAFtpTwCJB6y76EHQrHc7WzLlq8OJSsxApOke8M0BzXFrfMy
 CU7UUpTvNZTLpZibLCEQKemv1+oNOkfFylsHxfek2MCqx0W6W4FHEGV3qE/GtgV9
 +vurA9hNNp7VM0FGRGigcUr3woYdHLdEVQrlnL7Z9AgBu1W44MZLaai7iRVZOeCT
 ZQ9++v2PJJ8vHT8kdkgTdiRpnEhmv84MX/GBT7ilWFEMIVeT5zhGkIBojzNgyzGc
 7cvermmM0P8h+unkDgmzmSbDxo0PboqVKeoO71AOBhA6MmR9iom7XkuNdHhoOwy2
 4A5xT1srbhJDbuv15BBREBV24TywpZ4a1+4nwQT4L1fXe+HfCxeEWexGcKQMRcIt
 dAelOHTQ+ZGkOKvXeW05
 =ruGA
 -----END PGP SIGNATURE-----

Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull irq_domain support for all architectures from Grant Likely:
 "Generialize powerpc's irq_host as irq_domain

  This branch takes the PowerPC irq_host infrastructure (reverse mapping
  from Linux IRQ numbers to hardware irq numbering), generalizes it,
  renames it to irq_domain, and makes it available to all architectures.

  Originally the plan has been to create an all-new irq_domain
  implementation which addresses some of the powerpc shortcomings such
  as not handling 1:1 mappings well, but doing that proved to be far
  more difficult and invasive than generalizing the working code and
  refactoring it in-place.  So, this branch rips out the 'new'
  irq_domain and replaces it with the modified powerpc version (in a
  fully bisectable way of course).  It converts all users over to the
  new API and makes irq_domain selectable on any architecture.

  No architecture is forced to enable irq_domain, but the infrastructure
  is required for doing OpenFirmware style irq translations.  It will
  even work on SPARC even though SPARC has it's own mechanism for
  translating irqs at boot time.  MIPS, microblaze, embedded x86 and c6x
  are converted too.

  The resulting irq_domain code is probably still too verbose and can be
  optimized more, but that can be done incrementally and is a task for
  follow-on patches."

* tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits)
  dt: fix twl4030 for non-dt compile on x86
  mfd: twl-core: Add IRQ_DOMAIN dependency
  devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc)
  irq_domain: Centralize definition of irq_dispose_mapping()
  irq_domain/mips: Allow irq_domain on MIPS
  irq_domain/x86: Convert x86 (embedded) to use common irq_domain
  ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c
  irq_domain/microblaze: Convert microblaze to use irq_domains
  irq_domain/powerpc: Replace custom xlate functions with library functions
  irq_domain/powerpc: constify irq_domain_ops
  irq_domain/c6x: Use library of xlate functions
  irq_domain/c6x: constify irq_domain structures
  irq_domain/c6x: Convert c6x to use generic irq_domain support.
  irq_domain: constify irq_domain_ops
  irq_domain: Create common xlate functions that device drivers can use
  irq_domain: Remove irq_domain_add_simple()
  irq_domain: Remove 'new' irq_domain in favour of the ppc one
  mfd: twl-core.c: Fix the number of interrupts managed by twl4030
  of/address: add empty static inlines for !CONFIG_OF
  irq_domain: Add support for base irq and hwirq in legacy mappings
  ...
2012-03-21 10:27:19 -07:00
Richard Weinberger fa8d9d74c3 OpenRISC: Remove memory_start/end prototypes
OpenRISC does not have global memory_start and memory_end
symbols.
The prototypes are in vain.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:37:21 +01:00
Jonas Bonn 1bc0b9fd75 openrisc: remove semicolon from KSTK_ defs
Things break rather ungracefully when a semicolon gets substituted into
an expression... discovered while build-testing linux-next for 3.4

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:37:20 +01:00
Jonas Bonn 6cbe5e9526 openrisc: sanitize use of orig_gpr11
The pt_regs struct had both a 'syscallno' field and an 'orig_gpr11' field
and it wasn't really clear how these were supposed to be used.  This patch
removes the syscallno field altogether and makes orig_gpr11 work more
like other architectures: keep track of syscall number in progress or
hold -1 for non-syscall exceptions.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:37:00 +01:00
Jonas Bonn 2f099a280e openrisc: fix virt_addr_valid
virt_addr_valid() shouldn't be comparing the address to memory_end which is
a phys_addr_t.  Change this to do like other arches and check that the
address falls within a valid page frame.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:36:08 +01:00
Richard Weinberger 01c4d33ac5 OpenRISC: Export dump_stack()
dump_stack() is used by modules and needs to be exported.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:36:02 +01:00
Richard Weinberger 0662d33ad9 OpenRISC: Select GENERIC_ATOMIC64
To have atomit64_t on OpenRISC we need GENERIC_ATOMIC64.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-03-06 10:34:13 +01:00
Grant Likely d593f25ff2 irq_domain: Centralize definition of irq_dispose_mapping()
Several architectures define their own empty irq_dispose_mapping().  Since
the irq_domain code is centralized now, there is little need to do so.  This
patch removes them and creates a new empty copy when !CONFIG_IRQ_DOMAIN is
selected.

The patch also means that IRQ_DOMAIN becomes selectable on all architectures.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: sparclinux@vger.kernel.org
Cc: linux@lists.openrisc.net
2012-02-26 16:48:06 -07:00
Jonas Bonn 754d5c2bf6 openrisc: Set shortest clock event to 100 ticks
It takes a couple of instructions to actually configure a clock event
so setting an alarm just 1 clock cycle in the future isn't going to work;
doing so results in setting an alarm in the "past" in which case the event
won't fire until the timer overflows and rolls back around to the "current
time".

Not quite sure how many clock cycles it actually takes to get through to
actually writing the register, but 100 seems to work reliably.

Use generic helper to set up the clock event while we're at it.

Reported-by: Jan Schulte <jan.schulte@aacmicrotec.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 10:08:19 +01:00
Danny Kukawka 1742527511 openrisc: included linux/thread_info.h twice
arch/openrisc/include/asm/uaccess.h: included 'linux/thread_info.h'
twice, remove the duplicate.

Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:25 +01:00
Matt Fleming d8d4b20df4 OpenRISC: Use set_current_blocked() and block_sigmask()
As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f2
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:25 +01:00
Matt Fleming e933c70de0 OpenRISC: Don't mask signals if we fail to setup signal stack
setup_rt_frame() needs to return an indication of whether it succeeded
or failed in setting up the signal stack frame. If setup_rt_frame()
fails then we must not modify current->blocked.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:24 +01:00
Matt Fleming b675eeb743 OpenRISC: No need to reset handler if SA_ONESHOT
get_signal_to_deliver() already resets the signal handler if
SA_ONESHOT is set in ka->sa.sa_flags, there's no need to do it again
in handle_signal(). Furthermore, because we were modifying
ka->sa.sa_handler (which is a copy of sighand->action[]) instead of
sighand->action[] the original code actually had no effect on signal
delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:23 +01:00
Matt Fleming 4ca159f725 OpenRISC: Don't reimplement force_sigsegv()
Instead of open coding the sequence from force_sigsegv() just call
it. This also fixes a bug because we were modifying ka->sa.sa_handler
(which is a copy of sighand->action[]), whereas the intention of the
code was to modify sighand->action[] directly.

As the original code was working with a copy it had no effect on
signal delivery.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux@lists.openrisc.net
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:23 +01:00
Stefan Kristiansson dec830189e openrisc: enable passing of flattened device tree pointer
This patch enables passing a fdt pointer to the kernel.

This makes for the kernel parameter API:

void kernel(unsigned int fdt);

which, in accordance with the OpenRISC ABI results in:
r3 = pointer to fdt

Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:22 +01:00
Julia Lawall 2e1c958de4 arch/openrisc/mm/init.c: trivial: use BUG_ON
Use BUG_ON(x) rather than if(x) BUG();

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);

@@ identifier x; @@
-if (!x) BUG();
+BUG_ON(!x);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:55:22 +01:00
Jonas Bonn 3f6ffc8c20 openrisc: Fix up audit_syscall_[entry|exit]() usage
Commits d7e7528bcd and
b05d8447e7 simplified the usage of the
audit_syscall_[entry|exit] functions.  Unfortunately, the OpenRISC
architecture didn't get fixed up along with the other architectures when
those patches were pushed.  This makes the relevant changes to this
architecture.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:53:12 +01:00
Jonas Bonn abdf8b5e07 openrisc: include export.h for EXPORT_SYMBOL
Use of EXPORT_SYMBOL requires inclusion of export.h

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2012-02-17 09:52:32 +01:00
Linus Torvalds c63dbbd526 Merge branch 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Kbuild: Use dtc's -d (dependency) option
  dtc: Implement -d option to write out a dependency file
  kbuild: Fix comment in Makefile.lib
  scripts/genksyms: clean lex/yacc generated files
  kbuild: Correctly deal with make options which contain an "s"
2012-01-16 14:34:54 -08:00
Stephen Warren 7c43185138 Kbuild: Use dtc's -d (dependency) option
This hooks dtc into Kbuild's dependency system.

Thus, for example, "make dtbs" will rebuild tegra-harmony.dtb if only
tegra20.dtsi has changed yet tegra-harmony.dts has not. The previous
lack of this feature recently caused me to have very confusing "git
bisect" results.

For ARM, it's obvious what to add to $(targets). I'm not familiar enough
with other architectures to know what to add there. Powerpc appears to
already add various .dtb files into $(targets), but the other archs may
need something added to $(targets) to work.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
[mmarek: Dropped arch/c6x part to avoid merging commits from the middle
of the merge window]
Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-01-15 00:04:35 +01:00
Ben Hutchings 9f13a1fd45 cpu: Register a generic CPU device on architectures that currently do not
frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11 15:50:11 -08:00
Linus Torvalds e343a895a9 lib: use generic pci_iomap on all architectures
Many architectures don't want to pull in iomap.c,
 so they ended up duplicating pci_iomap from that file.
 That function isn't trivial, and we are going to modify it
 https://lkml.org/lkml/2011/11/14/183
 so the duplication hurts.
 
 This reduces the scope of the problem significantly,
 by moving pci_iomap to a separate file and
 referencing that from all architectures.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJPBZXBAAoJECgfDbjSjVRpuuYIAIMD0wE96MuTOSBJX4VG8VAP
 UyjL9dsfMRy8CKioQo5/fxpTY07YBCWmNauSSX7pzgcoUKBfYIGn4Z1qwGYsWK9M
 CzLs6PXLTugw0FtKobHZl/klRTWEBS6YOUjp9x568rplwF+Ppk7b993uj7eS/g+e
 T0mUKzqg4/UavbHd9+W5KgC4drQ5hgtu2WZHoUxBK4umnd3C2G+U82Sthg50o/XU
 SC8IGm39K8I36HoIWgXj3Y7nkOP3mQELohOT4ZPiVSmLvGS4i47+ix75anO+8ZvZ
 jxHr8RC85IK1Nd89NZhbKOyvx0QQiwoKUZaTwcWXJNSOADzZnM6icdIsodc+Elo=
 =ccQZ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

lib: use generic pci_iomap on all architectures

Many architectures don't want to pull in iomap.c,
so they ended up duplicating pci_iomap from that file.
That function isn't trivial, and we are going to modify it
https://lkml.org/lkml/2011/11/14/183
so the duplication hurts.

This reduces the scope of the problem significantly,
by moving pci_iomap to a separate file and
referencing that from all architectures.

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  alpha: drop pci_iomap/pci_iounmap from pci-noop.c
  mn10300: switch to GENERIC_PCI_IOMAP
  mn10300: add missing __iomap markers
  frv: switch to GENERIC_PCI_IOMAP
  tile: switch to GENERIC_PCI_IOMAP
  tile: don't panic on iomap
  sparc: switch to GENERIC_PCI_IOMAP
  sh: switch to GENERIC_PCI_IOMAP
  powerpc: switch to GENERIC_PCI_IOMAP
  parisc: switch to GENERIC_PCI_IOMAP
  mips: switch to GENERIC_PCI_IOMAP
  microblaze: switch to GENERIC_PCI_IOMAP
  arm: switch to GENERIC_PCI_IOMAP
  alpha: switch to GENERIC_PCI_IOMAP
  lib: add GENERIC_PCI_IOMAP
  lib: move GENERIC_IOMAP to lib/Kconfig

Fix up trivial conflicts due to changes nearby in arch/{m68k,score}/Kconfig
2012-01-10 18:04:27 -08:00
Linus Torvalds 423d091dfe Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  cpu: Export cpu_up()
  rcu: Apply ACCESS_ONCE() to rcu_boost() return value
  Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
  docs: Additional LWN links to RCU API
  rcu: Augment rcu_batch_end tracing for idle and callback state
  rcu: Add rcutorture tests for srcu_read_lock_raw()
  rcu: Make rcutorture test for hotpluggability before offlining CPUs
  driver-core/cpu: Expose hotpluggability to the rest of the kernel
  rcu: Remove redundant rcu_cpu_stall_suppress declaration
  rcu: Adaptive dyntick-idle preparation
  rcu: Keep invoking callbacks if CPU otherwise idle
  rcu: Irq nesting is always 0 on rcu_enter_idle_common
  rcu: Don't check irq nesting from rcu idle entry/exit
  rcu: Permit dyntick-idle with callbacks pending
  rcu: Document same-context read-side constraints
  rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
  rcu: Remove dynticks false positives and RCU failures
  rcu: Reduce latency of rcu_prepare_for_idle()
  rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
  rcu: Avoid needlessly IPIing CPUs at GP end
  ...
2012-01-06 08:02:40 -08:00
Frederic Weisbecker 1268fbc746 nohz: Remove tick_nohz_idle_enter_norcu() / tick_nohz_idle_exit_norcu()
Those two APIs were provided to optimize the calls of
tick_nohz_idle_enter() and rcu_idle_enter() into a single
irq disabled section. This way no interrupt happening in-between would
needlessly process any RCU job.

Now we are talking about an optimization for which benefits
have yet to be measured. Let's start simple and completely decouple
idle rcu and dyntick idle logics to simplify.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:57 -08:00
Frederic Weisbecker 2bbb6817c0 nohz: Allow rcu extended quiescent state handling seperately from tick stop
It is assumed that rcu won't be used once we switch to tickless
mode and until we restart the tick. However this is not always
true, as in x86-64 where we dereference the idle notifiers after
the tick is stopped.

To prepare for fixing this, add two new APIs:
tick_nohz_idle_enter_norcu() and tick_nohz_idle_exit_norcu().

If no use of RCU is made in the idle loop between
tick_nohz_enter_idle() and tick_nohz_exit_idle() calls, the arch
must instead call the new *_norcu() version such that the arch doesn't
need to call rcu_idle_enter() and rcu_idle_exit().

Otherwise the arch must call tick_nohz_enter_idle() and
tick_nohz_exit_idle() and also call explicitly:

- rcu_idle_enter() after its last use of RCU before the CPU is put
to sleep.
- rcu_idle_exit() before the first use of RCU after the CPU is woken
up.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11 10:31:36 -08:00
Frederic Weisbecker 280f06774a nohz: Separate out irq exit and idle loop dyntick logic
The tick_nohz_stop_sched_tick() function, which tries to delay
the next timer tick as long as possible, can be called from two
places:

- From the idle loop to start the dytick idle mode
- From interrupt exit if we have interrupted the dyntick
idle mode, so that we reprogram the next tick event in
case the irq changed some internal state that requires this
action.

There are only few minor differences between both that
are handled by that function, driven by the ts->inidle
cpu variable and the inidle parameter. The whole guarantees
that we only update the dyntick mode on irq exit if we actually
interrupted the dyntick idle mode, and that we enter in RCU extended
quiescent state from idle loop entry only.

Split this function into:

- tick_nohz_idle_enter(), which sets ts->inidle to 1, enters
dynticks idle mode unconditionally if it can, and enters into RCU
extended quiescent state.

- tick_nohz_irq_exit() which only updates the dynticks idle mode
when ts->inidle is set (ie: if tick_nohz_idle_enter() has been called).

To maintain symmetry, tick_nohz_restart_sched_tick() has been renamed
into tick_nohz_idle_exit().

This simplifies the code and micro-optimize the irq exit path (no need
for local_irq_save there). This also prepares for the split between
dynticks and rcu extended quiescent state logics. We'll need this split to
further fix illegal uses of RCU in extended quiescent states in the idle
loop.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: David Miller <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11 10:31:35 -08:00
Tejun Heo 1aadc0560f memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users
The only function of memblock_analyze() is now allowing resize of
memblock region arrays.  Rename it to memblock_allow_resize() and
update its users.

* The following users remain the same other than renaming.

  arm/mm/init.c::arm_memblock_init()
  microblaze/kernel/prom.c::early_init_devtree()
  powerpc/kernel/prom.c::early_init_devtree()
  openrisc/kernel/prom.c::early_init_devtree()
  sh/mm/init.c::paging_init()
  sparc/mm/init_64.c::paging_init()
  unicore32/mm/init.c::uc32_memblock_init()

* In the following users, analyze was used to update total size which
  is no longer necessary.

  powerpc/kernel/machine_kexec.c::reserve_crashkernel()
  powerpc/kernel/prom.c::early_init_devtree()
  powerpc/mm/init_32.c::MMU_init()
  powerpc/mm/tlb_nohash.c::__early_init_mmu()  
  powerpc/platforms/ps3/mm.c::ps3_mm_add_memory()
  powerpc/platforms/embedded6xx/wii.c::wii_memory_fixups()
  sh/kernel/machine_kexec.c::reserve_crashkernel()

* x86/kernel/e820.c::memblock_x86_fill() was directly setting
  memblock_can_resize before populating memblock and calling analyze
  afterwards.  Call memblock_allow_resize() before start populating.

memblock_can_resize is now static inside memblock.c.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08 10:22:08 -08:00
Tejun Heo fe091c208a memblock: Kill memblock_init()
memblock_init() initializes arrays for regions and memblock itself;
however, all these can be done with struct initializers and
memblock_init() can be removed.  This patch kills memblock_init() and
initializes memblock with struct initializer.

The only difference is that the first dummy entries don't have .nid
set to MAX_NUMNODES initially.  This doesn't cause any behavior
difference.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-12-08 10:22:07 -08:00
Tejun Heo 1c16d242aa memblock: Fix include breakages caused by 24aa07882b
24aa07882b (memblock, x86: Replace memblock_x86_reserve/free_range()
with generic ones) removed arch/x86/include/asm/memblock.h and dropped
its inclusion from include/linux/memblock.h which breaks other
architectures which depended on the generic memblock.h pulling in the
arch specific one.

However, the proper fix isn't adding back the asm inclusion.  memblock
doesn't have any arch dependent part and doesn't need arch specific
header file and asm/memblock.h files are either practically empty or
contain mostly unrelated arch specific stuff.

* In microblaze, sh, powerpc, sparc and openrisc, asm/memblock.h is
  either empty or just contains unused MEMBLOCK_DBG() macro.  Remove
  them.

* In arm and unicore32, asm/memblock.h contains arch specific stuff.
  Include it directly from its users.  It might be a good idea to
  rename the header file to avoid confusion.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-12-08 10:22:06 -08:00
Michael S. Tsirkin 4673ca8eb3 lib: move GENERIC_IOMAP to lib/Kconfig
define GENERIC_IOMAP in a central location
instead of all architectures. This will be helpful
for the follow-up patch which makes it select
other configs. Code is also a bit shorter this way.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-11-24 22:21:19 +02:00
Linus Torvalds 02ebbbd481 Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scsi: drop unused Kconfig symbol
  pci: drop unused Kconfig symbol
  stmmac: drop unused Kconfig symbol
  x86: drop unused Kconfig symbol
  powerpc: drop unused Kconfig symbols
  powerpc: 40x: drop unused Kconfig symbol
  mips: drop unused Kconfig symbols
  openrisc: drop unused Kconfig symbols
  arm: at91: drop unused Kconfig symbol
  samples: drop unused Kconfig symbol
  m32r: drop unused Kconfig symbol
  score: drop unused Kconfig symbols
  sh: drop unused Kconfig symbol
  um: drop unused Kconfig symbol
  sparc: drop unused Kconfig symbol
  alpha: drop unused Kconfig symbol

Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig
as per Michal: the STMMAC_DUAL_MAC config variable is still unused and
should be deleted.
2011-11-06 18:54:53 -08:00
Paul Bolle 1e65eb83a2 openrisc: drop unused Kconfig symbols
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-10-31 23:39:52 +01:00
Paul Bolle 395cf9691d doc: fix broken references
There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-09-27 18:08:04 +02:00
Jonas Bonn 707b38a00b Add missing DMA ops
For the initial architecture submission, not all of the DMA ops were
implemented.  This patch adds the *map_page and *map_sg variants of the
DMA mapping ops.

This patch is currently of interest mainly to some drivers that haven't
been submitted upstream yet.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
2011-09-11 09:50:39 +02:00
Jonas Bonn d7cb666709 openrisc: don't use pt_regs in struct sigcontext
As it was decided not to export struct pt_regs to userspace, struct
sigcontext shouldn't be using it either.  The pt_regs struct for OpenRISC
is kernel internal and the layout of the registers may change in the
future.  The struct user_regs_struct is what is guaranteed to remain
stable, so struct sigcontext may use that instead.

This patch removes the usage of struct pt_regs in struct sigcontext and
makes according changes in signal.c to get the register layout right.

The usp field is removed from the sigcontext structure as this information
is already contained in the user_regs_struct.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Emilio Cota <cota@braap.org>
2011-09-05 14:29:12 +02:00
Jonas Bonn 616257669e OpenRISC: Miscellaneous
Adds README file, TODO list, and a couple of other pieces that didn't seem
to fit into any other patch.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:41 +02:00
Jonas Bonn 224cd129fd OpenRISC: Library routines
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:40 +02:00
Jonas Bonn 58e0166a47 OpenRISC: Headers
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:39 +02:00
Jonas Bonn 769a8a9622 OpenRISC: Traps
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:38 +02:00
Jonas Bonn 5a2bbb8f64 OpenRISC: Module support
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:37 +02:00
Jonas Bonn e480158cc8 OpenRISC: GPIO
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:37 +02:00
Jonas Bonn 88ef7f3f13 OpenRISC: Scheduling/Process management
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:36 +02:00
Jonas Bonn 2a7be1160a OpenRISC: Idle/Power management
Minimal functionality...

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:35 +02:00
Jonas Bonn 09abb90107 OpenRISC: System calls
The OpenRISC Linux kernel conforms to the "generic" syscall interface which
contains only the reduced set of syscalls deemed necessary for new
architectures.  Unfortunately, the uClibc port for OpenRISC does not fully
support this reduced set; as such, an additional patch available out-of-tree
needs to be applied to the kernel in order to use the current uClibc.  This
is just a temporary measure until the libc port can be straightened out; it
is likely that OpenRISC will make the transition to glibc shortly where the
generic syscall interface is better supported.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:34 +02:00
Jonas Bonn 816ebaa8b6 OpenRISC: IRQ
This patch adds support for the OpenRISC PIC.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: tglx@linutronix.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:33 +02:00
Jonas Bonn b731fbbd24 OpenRISC: Timekeeping
Implements support for the OpenRISC timer which is a 28 bit cycle counter
that can be read out of a special purpose register.  This counter is
used as a both a clock event and clocksource device.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: tglx@linutronix.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:32 +02:00
Jonas Bonn a39af6f7b8 OpenRISC: DMA
Simple DMA implementation.  Allows for allocation of coherent memory
(simply uncached) for DMA operations.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:32 +02:00
Jonas Bonn e5ad95ce9b OpenRISC: PTrace
This patch implements minimal PTrace support.  The pt_regs structure is
not exported to userspace for OpenRISC; rather, the GETREGSET mechanism
is intended to be used and the registers, as such, exported in the core
dump format which is ABI stable.  This is in line with what is intended
for new architectures as of 2.6.34 and has the advantage of permitting
the layout of the registers on the kernel stack (as per pt_regs) to be
freely modified.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:31 +02:00
Jonas Bonn f8c4a270d9 OpenRISC: Build infrastructure
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:30 +02:00
Jonas Bonn ac689eb7f9 OpenRISC: Signal handling
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:29 +02:00
Jonas Bonn 61e85e3675 OpenRISC: Memory management
Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:28 +02:00
Jonas Bonn 4f246ba30e OpenRISC: Device tree
The OpenRISC architecture uses the device tree infrastructure for the
platform description.  This is currently limited to having a device tree
built into the kernel, but work is underway within the OpenRISC project
to define how this device tree blob should be passed into the kernel from
an external resource.

Patch contains a single example DTS file to go with the defconfig for
or1ksim.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Cc: devicetree-discuss@lists.ozlabs.org
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:28 +02:00
Jonas Bonn 9d02a4283e OpenRISC: Boot code
Architecture code and early setup routines for booting Linux.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2011-07-22 18:46:27 +02:00