Commit Graph

1696 Commits

Author SHA1 Message Date
Kyle McMartin 317a68427d Revert "serial: 8250: Make SERIAL_8250_RUNTIME_UARTS work correctly"
This reverts commit cfcec52e97.

This regresses a longstanding behaviour on X86 systems, which end up with
PCI serial ports moving between ttyS4 and ttyS0 when you bisect to opposite
sides of this commit, resulting in the need to constantly modify the console
setting in order to bisect across it.

Please revert, we can work on solving this for ARM platforms in a less
disruptive way.

Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Karthik Manamcheri <karthik.manamcheri@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 10:08:28 -07:00
Chander Kashyap 60e9357547 serial: samsung: enable clock before clearing pending interrupts during init
Ensure that the uart controller clock is enabled prior to writing to the
interrupt mask and pending registers in the s3c24xx_serial_init_port
function.

Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 10:08:28 -07:00
Lucas Stach bff09b099b serial/imx: disable hardware flow control at startup
We only want to enable hardware flow control if RTS/CTS pins
are connected.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-03 10:08:28 -07:00
Linus Torvalds 00cec111ac ARM: SoC fixes for 3.10-rc
We didn't have any fixes sent up for -rc2, so this is a slightly larger
 batch. A bit all over the place platform-wise; OMAP, at91, marvell,
 renesas, sunxi, ux500, etc.
 
 I tried to summarize highlights but there isn't a whole lot to point
 out. Lots of little things fixed all over. A couple of defconfig updates
 due to new/changing options.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRn+66AAoJEIwa5zzehBx3f/4P/3sqK2z7u5SSa+tpkKYkxezO
 MykUOpUc4tuwrKiuUEeXPh89pjIrclQVzKYDqdaXIcezKB7IXFfQSyLNxDzGM7Y3
 NrqrURvNpDmUi6F/xP89gXWkbvg2zr563mxSMpkF4G8HTYxvCv7sY0W/PDzb48Qg
 q3Efc/AfQsOGM0Zl8WXX9jZBdCNTquZYWd7YEFxCe9oVRGfmNlIYKirPOLnk9MAZ
 iIrbfFQG+cOos0NKrjM+tbtQNnPUBQeZdy3MvR7DtXCpKNdxs5EJL9EyHHqGGzPk
 Jd1CG3hNrPiuKVhmVSDkELNDYNT7J9+/rya1Mc33pwMrReAIKWUU/sitvsOkKypi
 PnTvlJkUv3UM2fOtoF8mOhQLTGdKSWfaF0BfHNmnCqJFDPs8vuQjx7O1WGKKUdC4
 SbYZetUnL3AoMrEbza5EoMyqQwpTXiALWp4/6MunLhNyXo0OQvsqexvT6QIrhKyQ
 0iExuSSbXDZAw2GXsqzOlCJecxHYG4qkGbf1DmeTW31GRQQ3nhpiu0GVAvHIEAhT
 SJGD57P0gbEXMpnSIKLNKIAYlLdFkGx6AhX1/Xb+AL7Jsod+UEwgz2ya4GMI4JI/
 0lUe8fPglU3ws8Up1y5FcIq4gjXTsvsEy317zeW/oq2vac0ACKBika2EVukdMD/5
 SYr+m40EzQtVdTKuaZ+e
 =8tMi
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We didn't have any fixes sent up for -rc2, so this is a slightly
  larger batch.  A bit all over the place platform-wise; OMAP, at91,
  marvell, renesas, sunxi, ux500, etc.

  I tried to summarize highlights but there isn't a whole lot to point
  out.  Lots of little things fixed all over.  A couple of defconfig
  updates due to new/changing options."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: at91/sama5: fix incorrect PMC pcr div definition
  ARM: at91/dt: fix macb pinctrl_macb_rmii_mii_alt definition
  ARM: at91: at91sam9n12: move external irq declatation to DT
  ARM: shmobile: marzen: Use error values in usb_power_*
  ARM: tegra: defconfig fixes
  ARM: nomadik: fix IRQ assignment for SMC ethernet
  ARM: vt8500: Add missing NULL terminator in dt_compat
  clk: tegra: add ac97 controller clock
  clk: tegra: remove USB from clk init table
  ARM: dts: mvebu: Fix wrong the address reg value for the L2-cache node
  ARM: plat-orion: Fix num_resources and id for ge10 and ge11
  ARM: OMAP2+: hwmod: Remove sysc slave idle and auto idle apis
  SERIAL: OMAP: Remove the slave idle handling from the driver
  ARM: OMAP2+: serial: Remove the un-used slave idle hooks
  ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes
  ARM: OMAP2+: hwmod: Add a new flag to handle SIDLE in SWSUP only in active
  ARM: OMAP2+: hwmod: Fix sidle programming in _enable_sysc()/_idle_sysc()
  arm: mvebu: fix the 'ranges' property to handle PCIe
  ARM: mvebu: select ARCH_REQUIRE_GPIOLIB for mvebu platform
  ARM: AM33XX: Add missing .clkdm_name to clkdiv32k_ick clock
  ...
2013-05-24 16:27:37 -07:00
Matwey V. Kornilov e037f95ffb tty: mxser: Fix build warning introduced by dfc7b837c7 (Re: linux-next: build warning after merge of the tty.current tree)
Fix build warning at mxser.c introduced by dfc7b837c7 (tty: mxser: fix
usage of opmode_ioaddr)

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-22 10:26:02 -07:00
Matwey V. Kornilov dfc7b837c7 tty: mxser: fix usage of opmode_ioaddr
mxser_port->opmode_ioaddr is initialized only for MOXA_MUST_MU860_HWID
chips, but no precautions have been undertaken to prevent reading and
writing to undefined port number.

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21 10:26:05 -07:00
Heikki Krogerus 9d83e1807e serial: 8250_dw: add ACPI ID for Intel BayTrail
This is the same controller as on Intel Lynxpoint but the
ACPI ID is different.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21 10:25:05 -07:00
Wang YanQing dab73b4eb9 TTY: Fix tty miss restart after we turn off flow-control
I meet emacs hang in start if I do the operation below:
  1: echo 3 > /proc/sys/vm/drop_caches
  2: emacs BigFile
  3: Press CTRL-S follow 2 immediately

Then emacs hang on, CTRL-Q can't resume, the terminal
hang on, you can do nothing with this terminal except
close it.

The reason is before emacs takeover control the tty,
we use CTRL-S to XOFF it. Then when emacs takeover the
control, it may don't use the flow-control, so emacs hang.
This patch fix it.

This patch will fix a kind of strange tty relation hang problem,
I believe I meet it with vim in ssh, and also see below bug report:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823

Signed-off-by: Wang YanQing <udknight@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 12:15:59 -07:00
Peter Hurley 421b40a628 tty/vt: Fix vc_deallocate() lock order
Now that the tty port owns the flip buffers and i/o is allowed
from the driver even when no tty is attached, the destruction
of the tty port (and the flip buffers) must ensure that no
outstanding work is pending.

Unfortunately, this creates a lock order problem with the
console_lock (see attached lockdep report [1] below).

For single console deallocation, drop the console_lock prior
to port destruction. When multiple console deallocation,
defer port destruction until the consoles have been
deallocated.

tty_port_destroy() is not required if the port has not
been used; remove from vc_allocate() failure path.

[1] lockdep report from Dave Jones <davej@redhat.com>

 ======================================================
 [ INFO: possible circular locking dependency detected ]
 3.9.0+ #16 Not tainted
 -------------------------------------------------------
 (agetty)/26163 is trying to acquire lock:
 blocked:  ((&buf->work)){+.+...}, instance: ffff88011c8b0020, at: [<ffffffff81062065>] flush_work+0x5/0x2e0

 but task is already holding lock:
 blocked:  (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (console_lock){+.+.+.}:
        [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
        [<ffffffff810416c7>] console_lock+0x77/0x80
        [<ffffffff813c3dcd>] con_flush_chars+0x2d/0x50
        [<ffffffff813b32b2>] n_tty_receive_buf+0x122/0x14d0
        [<ffffffff813b7709>] flush_to_ldisc+0x119/0x170
        [<ffffffff81064381>] process_one_work+0x211/0x700
        [<ffffffff8106498b>] worker_thread+0x11b/0x3a0
        [<ffffffff8106ce5d>] kthread+0xed/0x100
        [<ffffffff81601cac>] ret_from_fork+0x7c/0xb0

 -> #0 ((&buf->work)){+.+...}:
        [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00
        [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
        [<ffffffff810620ae>] flush_work+0x4e/0x2e0
        [<ffffffff81065305>] __cancel_work_timer+0x95/0x130
        [<ffffffff810653b0>] cancel_work_sync+0x10/0x20
        [<ffffffff813b8212>] tty_port_destroy+0x12/0x20
        [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110
        [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230
        [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50
        [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530
        [<ffffffff811baad1>] sys_ioctl+0x81/0xa0
        [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b

 other info that might help us debug this:

 [ 6760.076175]  Possible unsafe locking scenario:

        CPU0                    CPU1
        ----                    ----
   lock(console_lock);
                                lock((&buf->work));
                                lock(console_lock);
   lock((&buf->work));

  *** DEADLOCK ***

 1 lock on stack by (agetty)/26163:
  #0: blocked:  (console_lock){+.+.+.}, instance: ffffffff81c2fde0, at: [<ffffffff813bc201>] vt_ioctl+0xb61/0x1230
 stack backtrace:
 Pid: 26163, comm: (agetty) Not tainted 3.9.0+ #16
 Call Trace:
  [<ffffffff815edb14>] print_circular_bug+0x200/0x20e
  [<ffffffff810b349a>] __lock_acquire+0x193a/0x1c00
  [<ffffffff8100a269>] ? sched_clock+0x9/0x10
  [<ffffffff8100a269>] ? sched_clock+0x9/0x10
  [<ffffffff8100a200>] ? native_sched_clock+0x20/0x80
  [<ffffffff810b3f74>] lock_acquire+0xa4/0x210
  [<ffffffff81062065>] ? flush_work+0x5/0x2e0
  [<ffffffff810620ae>] flush_work+0x4e/0x2e0
  [<ffffffff81062065>] ? flush_work+0x5/0x2e0
  [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140
  [<ffffffff8113c8a3>] ? __free_pages_ok.part.57+0x93/0xc0
  [<ffffffff810b15db>] ? mark_held_locks+0xbb/0x140
  [<ffffffff810652f2>] ? __cancel_work_timer+0x82/0x130
  [<ffffffff81065305>] __cancel_work_timer+0x95/0x130
  [<ffffffff810653b0>] cancel_work_sync+0x10/0x20
  [<ffffffff813b8212>] tty_port_destroy+0x12/0x20
  [<ffffffff813c65e8>] vc_deallocate+0xf8/0x110
  [<ffffffff813bc20c>] vt_ioctl+0xb6c/0x1230
  [<ffffffff810aec41>] ? lock_release_holdtime.part.30+0xa1/0x170
  [<ffffffff813b01a5>] tty_ioctl+0x285/0xd50
  [<ffffffff812b00f6>] ? inode_has_perm.isra.46.constprop.61+0x56/0x80
  [<ffffffff811ba825>] do_vfs_ioctl+0x305/0x530
  [<ffffffff812b04db>] ? selinux_file_ioctl+0x5b/0x110
  [<ffffffff811baad1>] sys_ioctl+0x81/0xa0
  [<ffffffff81601d59>] system_call_fastpath+0x16/0x1b

Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 12:15:59 -07:00
Wei Yongjun df957d2b9c TTY: ehv_bytechan: add missing platform_driver_unregister() when module exit
We have registered platform driver when module init, and
need unregister it when module exit.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 12:15:59 -07:00
Jiri Slaby 416187caed TTY: rocket, fix more no-PCI warnings
Commit "TTY: rocket, fix compilation warning" fixed a compilation
warning, but there was still a problem with !CONFIG_PCI configs. So
fix them for good by coupling the PCI functions together and moving
them inside a common #ifdef.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 12:15:59 -07:00
Wei Yongjun 2b359172e0 serial: mcf: missing uart_unregister_driver() on error in mcf_init()
Add the missing uart_unregister_driver() before return
from mcf_init() in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:56 -07:00
Wei Yongjun 9bcc327844 tty: serial: mpc5xxx: fix error handing in mpc52xx_uart_init()
Add the missing uart_unregister_driver() and uninit before return
from mpc52xx_uart_init() in the error handling case.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:55 -07:00
Wei Yongjun a82ea43965 serial: samsung: add missing platform_driver_unregister() when module exit
We have registered platform driver when module init, and
need unregister it when module exit.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:55 -07:00
Lee Jones f6b6f52b58 serial: pl011: protect attribute read from NULL platform data struct
It's completely feasible that platform data will be empty i.e. when
booting with Device Tree with no device AUXDATA. So we must protect
it's use in these use-cases, or risk a kernel Oops.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:55 -07:00
Lars-Peter Clausen 383d2fc96c tty: nwpserial: Pass correct pointer to free_irq()
free_irq() expects the same pointer that was passed to request_irq(), otherwise
the IRQ is not freed.

The issue was found using the following coccinelle script:

<smpl>
@r1@
type T;
T devid;
@@
request_irq(..., devid)

@r2@
type r1.T;
T devid;
position p;
@@
free_irq@p(..., devid)

@@
position p != r2.p;
@@
*free_irq@p(...)
</smpl>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:55 -07:00
Ezequiel Garcia dbd2df859a serial: 8250_dw: Add valid clk pointer check
Commit ffc3ae6dd "serial: 8250_dw: Enable runtime PM" introduced runtime
PM management, which enables/disables the clk without checking if the clk
is valid. However, this driver allows to be probed without a defined clk,
using clock-frequency, as a fallback.

Therefore, on platforms that are device tree probed using clock-frequency
instead of clk, we get an ugly NULL pointer dereference.

This patch fixes it by simply adding a check before accessing the clk api.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-20 11:54:55 -07:00
Santosh Shilimkar 7f18d05a1a SERIAL: OMAP: Remove the slave idle handling from the driver
UART IP slave idle handling now taken care by runtime pm backend(hwmod layer)
so remove the hackery from the driver.

As discussed on the list, in future if dma mode needs to be brought
back to this driver, UART sysc handling needs to be updated in
framework such a way that no-idle/force idle profile can be supported.
Given the broken dma mode for OMAP uarts, its very unlikely.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Tested-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Rajendra nayak <rnayak@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>  # OMAP4/Panda
Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-05-19 16:37:08 -06:00
Linus Torvalds c4cc75c332 Merge git://git.infradead.org/users/eparis/audit
Pull audit changes from Eric Paris:
 "Al used to send pull requests every couple of years but he told me to
  just start pushing them to you directly.

  Our touching outside of core audit code is pretty straight forward.  A
  couple of interface changes which hit net/.  A simple argument bug
  calling audit functions in namei.c and the removal of some assembly
  branch prediction code on ppc"

* git://git.infradead.org/users/eparis/audit: (31 commits)
  audit: fix message spacing printing auid
  Revert "audit: move kaudit thread start from auditd registration to kaudit init"
  audit: vfs: fix audit_inode call in O_CREAT case of do_last
  audit: Make testing for a valid loginuid explicit.
  audit: fix event coverage of AUDIT_ANOM_LINK
  audit: use spin_lock in audit_receive_msg to process tty logging
  audit: do not needlessly take a lock in tty_audit_exit
  audit: do not needlessly take a spinlock in copy_signal
  audit: add an option to control logging of passwords with pam_tty_audit
  audit: use spin_lock_irqsave/restore in audit tty code
  helper for some session id stuff
  audit: use a consistent audit helper to log lsm information
  audit: push loginuid and sessionid processing down
  audit: stop pushing loginid, uid, sessionid as arguments
  audit: remove the old depricated kernel interface
  audit: make validity checking generic
  audit: allow checking the type of audit message in the user filter
  audit: fix build break when AUDIT_DEBUG == 2
  audit: remove duplicate export of audit_enabled
  Audit: do not print error when LSMs disabled
  ...
2013-05-11 14:29:11 -07:00
Linus Torvalds daf799cca8 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:

 - More work on DT support for various platforms

 - Various fixes that were to late to make it straight into 3.9

 - Improved platform support, in particular the Netlogic XLR and
   BCM63xx, and the SEAD3 and Malta eval boards.

 - Support for several Ralink SOC families.

 - Complete support for the microMIPS ASE which basically reencodes the
   existing MIPS32/MIPS64 ISA to use non-constant size instructions.

 - Some fallout from LTO work which remove old cruft and will generally
   make the MIPS kernel easier to maintain and resistant to compiler
   optimization, even in absence of LTO.

 - KVM support.  While MIPS has announced hardware virtualization
   extensions this KVM extension uses trap and emulate mode for
   virtualization of MIPS32.  More KVM work to add support for VZ
   hardware virtualizaiton extensions and MIPS64 will probably already
   be merged for 3.11.

Most of this has been sitting in -next for a long time.  All defconfigs
have been build or run time tested except three for which fixes are being
sent by other maintainers.

Semantic conflict with kvm updates done as per Ralf

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits)
  MIPS: Add new GIC clockevent driver.
  MIPS: Formatting clean-ups for clocksources.
  MIPS: Refactor GIC clocksource code.
  MIPS: Move 'gic_frequency' to common location.
  MIPS: Move 'gic_present' to common location.
  MIPS: MIPS16e: Add unaligned access support.
  MIPS: MIPS16e: Support handling of delay slots.
  MIPS: MIPS16e: Add instruction formats.
  MIPS: microMIPS: Optimise 'strnlen' core library function.
  MIPS: microMIPS: Optimise 'strlen' core library function.
  MIPS: microMIPS: Optimise 'strncpy' core library function.
  MIPS: microMIPS: Optimise 'memset' core library function.
  MIPS: microMIPS: Add configuration option for microMIPS kernel.
  MIPS: microMIPS: Disable LL/SC and fix linker bug.
  MIPS: microMIPS: Add vdso support.
  MIPS: microMIPS: Add unaligned access support.
  MIPS: microMIPS: Support handling of delay slots.
  MIPS: microMIPS: Add support for exception handling.
  MIPS: microMIPS: Floating point support.
  MIPS: microMIPS: Fix macro naming in micro-assembler.
  ...
2013-05-10 07:48:05 -07:00
Linus Torvalds 977b58e1dd Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
 "The bulk of the changes are generalizing the ColdFire v3 core support
  and adding in 537x CPU support.  Also a couple of other bug fixes, one
  to fix a reintroduction of a past bug in the romfs filesystem nommu
  support."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: enable Timer on coldfire 532x
  m68knommu: fix ColdFire 5373/5329 QSPI base address
  m68knommu: add support for configuring a Freescale M5373EVB board
  m68knommu: add support for the ColdFire 537x family of CPUs
  m68knommu: make ColdFire M532x platform support more v3 generic
  m68knommu: create and use a common M53xx ColdFire class of CPUs
  m68k: remove unused asm/dbg.h
  m68k: Set ColdFire ACR1 cache mode depending on kernel configuration
  romfs: fix nommu map length to keep inside filesystem
  m68k: clean up unused "config ROMVECSIZE"
2013-05-10 07:22:35 -07:00
Jonas Gorski 042df4fa28 MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c
All the header file does is provide the internal structure of clk,
which shouldn't be used by anyone except clk.c itself anyway.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patchwork: http://patchwork.linux-mips.org/patch/5055/
Acked-by: John Crispin <blogic@openwrt.org>
2013-05-08 01:19:04 +02:00
Linus Torvalds 1bf25e78af ARM: arm-soc: late cleanups
These are cleanups and smaller changes that either depend on earlier
 feature branches or came in late during the development cycle.
 We normally try to get all cleanups early, so these are the exceptions:
 
 - A follow-up on the clocksource reworks, hopefully the last time
   we need to merge clocksource subsystem changes through arm-soc.
   A first set of patches was part of the original 3.10 arm-soc cleanup
   series because of interdependencies with timer drivers now moved out
   of arch/arm.
 
 - Migrating the SPEAr13xx platform away from using auxdata for DMA
   channel descriptions towards using information in device tree,
   based on the earlier SPEAr multiplatform series
 
 - A few follow-ups on the Atmel SAMA5 support and other changes
   for Atmel at91 based on the larger at91 reworks.
 
 - Moving the armada irqchip implementation to drivers/irqchip
 
 - Several OMAP cleanups following up on the larger series already
   merged in 3.10.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYj5U2CrR//JCVInAQLNIRAAvsCtYOmXTxkRBxdtNEUUbkEjx71Se7q0
 h9PR8vqlkbYwONkJ8a6j8pKq/WJDmLpHQWg/moBsvlGc6uEVBPBFhCWHs1+yGUzX
 GhnJOaIKh3+651hIoXccS+/YZ16e1EAzdCM7+1QegPTldsRGkTOiwXgmR51kmPrz
 6cZ8P5MFqMrWIy4XqWhOBbMDCY/An05IHMpniGIamUg2/uB921Z0wNFvDrnsg97u
 DsVEwimyCJ0j7aO4TH+fkvsjoGWnIhxPtpaIm8iff6TPRI49deRb3zYpnIONm+oG
 /cQrRf3BNW+aiTuRCTEjdBNGtcrYgN6CLWWjzgMhv1itSlX8swBcOhuNJRCGNQRI
 v3wL4aEBxUpPGGL8erc2GIW7pe29YC2UEYI2z1X/5MEzYO589zkkG2k+/3HQVUwp
 dnYpQxhjRMvh4mcodBJFRjzH1Z7agKUwtoKalAHRRH7r5gJDkpL3zLoMhYPTG5IZ
 OwU+aYf+dDxh2kKW0zs8a/qL97UTHjlTRUC9LPoumvJ7LlKeDfzEn7DHUm2gggiu
 dO9ye/NF/xEXoDXTl0Qp2wJ6/sbPSLyCYCIMdP/gJjWUiDDqqZ0VRaKL7vE/JWrd
 NJ7k5yunX8/kRgfqgRFLDdFnPj1JeYHlmexsq4l9TPbPstoIcbw8u1v9sr8aZF+Z
 agh9u4e7QU8=
 =HWfp
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These are cleanups and smaller changes that either depend on earlier
  feature branches or came in late during the development cycle.  We
  normally try to get all cleanups early, so these are the exceptions:

   - A follow-up on the clocksource reworks, hopefully the last time we
     need to merge clocksource subsystem changes through arm-soc.

     A first set of patches was part of the original 3.10 arm-soc
     cleanup series because of interdependencies with timer drivers now
     moved out of arch/arm.

   - Migrating the SPEAr13xx platform away from using auxdata for DMA
     channel descriptions towards using information in device tree,
     based on the earlier SPEAr multiplatform series

   - A few follow-ups on the Atmel SAMA5 support and other changes for
     Atmel at91 based on the larger at91 reworks.

   - Moving the armada irqchip implementation to drivers/irqchip

   - Several OMAP cleanups following up on the larger series already
     merged in 3.10."

* tag 'cleanup-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits)
  ARM: OMAP4: change the device names in usb_bind_phy
  ARM: OMAP2+: Fix mismerge for timer.c between ff931c82 and da4a686a
  ARM: SPEAr: conditionalize SMP code
  ARM: arch_timer: Silence debug preempt warnings
  ARM: OMAP: remove unused variable
  serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
  ata: arasan: remove the need for platform_data
  ARM: at91/sama5d34ek.dts: remove not needed compatibility string
  ARM: at91: dts: add MCI DMA support
  ARM: at91: dts: add i2c dma support
  ARM: at91: dts: set #dma-cells to the correct value
  ARM: at91: suspend both memory controllers on at91sam9263
  irqchip: armada-370-xp: slightly cleanup irq controller driver
  irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
  irqchip: move IRQ driver for Armada 370/XP
  ARM: mvebu: move L2 cache initialization in init_early()
  devtree: add binding documentation for sp804
  ARM: integrator-cp: convert use CLKSRC_OF for timer init
  ARM: versatile: use OF init for sp804 timer
  ARM: versatile: add versatile dtbs to dtbs target
  ...
2013-05-07 11:22:14 -07:00
Linus Torvalds 38f56f33ca ARM: arm-soc device tree changes, part 2
These are mostly new device tree bindings for existing drivers, as well
 as changes to the device tree source files to add support for those
 devices, and a couple of new boards, most notably Samsung's Exynos5
 based Chromebook.
 
 The changes depend on earlier platform specific updates and touch
 the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUYgjh2CrR//JCVInAQJTvRAAmxaeoI+kQ/pbbRDa/Mnhf+bUmQjvJvx4
 uFGYAAi23Txem2Bx6xrfvOo9//ATYSfRxenoSSOtXQucsnrqD0+837Sj2NbO6AB9
 MSiFDK4usJtGwSUybkSHNLb2QPBr8XTgmyWVE/sHEw2UtrIToC1n3sxFofFm0guT
 ReILKsgK0Wjyq5RntnjWOCHNNp6OGqDGvFXlSJqNA7Z6gR/VZy4o0oXS4Sv3TWgF
 zG7ngSG7/u9FP1IQnMr/SxY1T4QS/bBbAC1YvD/7X30DPHrWKR3/3LfLcsc9TUN2
 smTlZQjHdgBbGfVPL7JN0fQwA82HEjNSZKLJ0w9uFjxXgnoKT3znpUpQeuf3dsWm
 BhEFqN1Rf446S4ft2btBSB2nhX4NTlJ7w6z2F65xgaylgYFsGFTYcpjiOurKe3wF
 gGsw31DZdcuI4/LjiWbNGRKbMd7HFFLbFDMJ16TFbNcNr+pM3qpoQ6z3uMbfCBSe
 xFnYr+ESN8F2HXMNLiz3CTqLY+Fi/bHd22n3KuI9qsWws/0KDUrTvFh9Sm3kYji5
 QwwLl6PRoeFw8H29e3KrPsKoY/BGYAvrAetnC1o79cDFPLwUyii/1B6WwzC4ynfs
 K1VhwdVOwnp0sS/a2Pv8sZBpDNI07gwT9P20aiholxgREq2RKNXXVxGGFfK5Qvm9
 FG4Vp6EKEQ0=
 =G60S
 -----END PGP SIGNATURE-----

Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree updates (part 2) from Arnd Bergmann:
 "These are mostly new device tree bindings for existing drivers, as
  well as changes to the device tree source files to add support for
  those devices, and a couple of new boards, most notably Samsung's
  Exynos5 based Chromebook.

  The changes depend on earlier platform specific updates and touch the
  usual platforms: omap, exynos, tegra, mxs, mvebu and davinci."

* tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits)
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: add mshc controller node for Exynos4x12 SoCs
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
  ARM: davinci: da850-evm: add SPI flash support
  ARM: davinci: da850: override SPI DT node device name
  ARM: davinci: da850: add SPI1 DT node
  spi/davinci: add DT binding documentation
  spi/davinci: no wildcards in DT compatible property
  ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
  ARM: dts: mvebu: introduce internal-regs node
  ARM: dts: mvebu: Convert all the mvebu files to use the range property
  ARM: dts: mvebu: move all peripherals inside soc
  ARM: dts: mvebu: fix cpus section indentation
  ARM: davinci: da850: add EHRPWM & ECAP DT node
  ARM/dts: OMAP3: fix pinctrl-single configuration
  ARM: dts: Add OMAP3430 SDP NOR flash memory binding
  ARM: dts: Add NOR flash bindings for OMAP2420 H4
  ...
2013-05-07 11:06:17 -07:00
Arnd Bergmann 4183bef2e0 Merge branch 'late/dt' into next/dt2
This is support for the ARM Chromebook, originally scheduled
as a "late" pull request. Since it's already late now, we
can combine this into the existing next/dt2 branch.

* late/dt:
  ARM: exynos: dts: cros5250: add EC device
  ARM: dts: Add sbs-battery for exynos5250-snow
  ARM: dts: Add i2c-arbitrator bus for exynos5250-snow
  ARM: dts: Add chip-id controller node on Exynos4/5 SoC
  ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree
2013-05-06 23:38:00 +02:00
Wei Yongjun ad348cc534 serial: sunsu: add missing platform_driver_unregister() when module exit
We have registered platform driver when module init, and
need unregister it when module exit.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-04 17:39:48 -07:00
Linus Torvalds 20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds 251df49db3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
 "Assorted fixes and cleanups to the existing drivers plus a new driver
  for IMS Passenger Control Unit device they use for ther in-flight
  entertainment system."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: trackpoint - Optimize trackpoint init to use power-on reset
  Input: apbps2 - convert to devm_ioremap_resource()
  Input: ALPS - use %ph to print buffers
  ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling
  Input: st1232 - add reset pin handling
  Input: st1232 - convert to devm_* infrastructure
  Input: MT - handle semi-mt devices in core
  Input: adxl34x - use spi_get_drvdata()
  Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ims-pcu - fix a memory leak on error
  Input: sysrq - supplement reset sequence with timeout functionality
  Input: tegra-kbc - support for defining row/columns based on SoC
  Input: imx_keypad - switch to using managed resources
  Input: arc_ps2 - add support for device tree
  Input: mma8450 - fix signed 12bits to 32bits conversion
  Input: eeti_ts - remove redundant null check
  Input: edt-ft5x06 - remove redundant null check before kfree
  Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions
  Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions
  ...
2013-05-01 13:20:04 -07:00
Linus Torvalds b0b885657b tty: fix up atime/mtime mess, take three
We first tried to avoid updating atime/mtime entirely (commit
b0de59b5733d: "TTY: do not update atime/mtime on read/write"), and then
limited it to only update it occasionally (commit 37b7f3c76595: "TTY:
fix atime/mtime regression"), but it turns out that this was both
insufficient and overkill.

It was insufficient because we let people attach to the shared ptmx node
to see activity without even reading atime/mtime, and it was overkill
because the "only once a minute" means that you can't really tell an
idle person from an active one with 'w'.

So this tries to fix the problem properly.  It marks the shared ptmx
node as un-notifiable, and it lowers the "only once a minute" to a few
seconds instead - still long enough that you can't time individual
keystrokes, but short enough that you can tell whether somebody is
active or not.

Reported-by: Simon Kirby <sim@hostway.ca>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 07:32:21 -07:00
Eric Paris bee0a224e7 audit: do not needlessly take a lock in tty_audit_exit
We were doing spin_lock_irq and spin_unlock_irq.  This is STOOPID.

If we were in interupt context we were already screwed and called
panic() in do_exit().  So the irq stuff is useless.  Also, these values
can only be changed by receiving a netlink message from current.  Since
we are in do_exit() clearly we aren't in the syscall sending the netlink
message to change these values.  Thus, just read them and go with it.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 2ce88dd042 audit: do not needlessly take a spinlock in copy_signal
current->signal->audit_* can only change from a netlink message from
current.  Obviously in this case we cannot be handling a netlink message
from current.  So there is no change these can change under us.  No need
to take a lock to read them.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Richard Guy Briggs 46e959ea29 audit: add an option to control logging of passwords with pam_tty_audit
Most commands are entered one line at a time and processed as complete lines
in non-canonical mode.  Commands that interactively require a password, enter
canonical mode to do this while shutting off echo.  This pair of features
(icanon and !echo) can be used to avoid logging passwords by audit while still
logging the rest of the command.

Adding a member (log_passwd) to the struct audit_tty_status passed in by
pam_tty_audit allows control of canonical mode without echo per task.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris bde02ca858 audit: use spin_lock_irqsave/restore in audit tty code
Some of the callers of the audit tty function use spin_lock_irqsave/restore.
We were using the forced always enable version, which seems really bad.
Since I don't know every one of these code paths well enough, it makes
sense to just switch everything to the safe version.  Maybe it's a
little overzealous, but it's a lot better than an unlucky deadlock when
we return to a caller with irq enabled and they expect it to be
disabled.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris 152f497b9b audit: push loginuid and sessionid processing down
Since we are always current, we can push a lot of this stuff to the
bottom and get rid of useless interfaces and arguments.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Eric Paris dc9eb698f4 audit: stop pushing loginid, uid, sessionid as arguments
We always use current.  Stop pulling this when the skb comes in and
pushing it around as arguments.  Just get it at the end when you need
it.

Signed-off-by: Eric Paris <eparis@redhat.com>
2013-04-30 15:31:28 -04:00
Linus Torvalds 507ffe4f38 TTY/Serial driver update for 3.10-rc1
Here's the big tty/serial driver merge request for 3.10-rc1
 
 Once again, Jiri has a number of TTY driver fixes and cleanups, and
 Peter Hurley came through with a bunch of ldisc fixes that resolve a
 number of reported issues.  There are some other serial driver cleanups
 as well.
 
 All of these have been in the linux-next tree for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+nSMACgkQMUfUDdst+ymy9QCfRmYn0MC0W+Q1D3Spz87gVsuo
 cqEAniu1BEkYZpjAz7ZlIN07Ao0jbQOR
 =Osu/
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver update from Greg Kroah-Hartman:
 "Here's the big tty/serial driver merge request for 3.10-rc1

  Once again, Jiri has a number of TTY driver fixes and cleanups, and
  Peter Hurley came through with a bunch of ldisc fixes that resolve a
  number of reported issues.  There are some other serial driver
  cleanups as well.

  All of these have been in the linux-next tree for a while"

* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
  tty/serial/sirf: fix MODULE_DEVICE_TABLE
  serial: mxs: drop superfluous {get|put}_device
  serial: mxs: fix buffer overflow
  ARM: PL011: add support for extended FIFO-size of PL011-r1p5
  serial_core.c: add put_device() after device_find_child()
  tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
  serial: sccnxp: Replace pdata.init/exit with regulator API
  serial: sccnxp: Do not override device name
  TTY: pty, fix compilation warning
  TTY: rocket, fix compilation warning
  TTY: ircomm: fix DTR being raised on hang up
  TTY: synclinkmp: fix DTR being raised on hang up
  TTY: synclink_gt: fix DTR being raised on hang up
  TTY: synclink: fix DTR being raised on hang up
  serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
  serial: 8250_dw: Convert to devm_ioremap()
  serial: 8250_dw: Set port capabilities based on CPR register
  serial: 8250_dw: Let ACPI code extract the DMA client info
  serial: 8250_dw: Support clk framework also with ACPI
  serial: 8250_dw: Enable runtime PM
  ...
2013-04-29 12:16:17 -07:00
Linus Torvalds 4f567cbc95 Char / Misc driver update for 3.10-rc1
Here's the big char / misc driver update for 3.10-rc1
 
 A number of various driver updates, the majority being new functionality
 in the MEI driver subsystem (it's now a subsystem, it started out just a
 single driver), extcon updates, memory updates, hyper-v updates, and a
 bunch of other small stuff that doesn't fit in any other tree.
 
 All of these have been in linux-next for a while
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iEYEABECAAYFAlF+mtYACgkQMUfUDdst+ymFXQCfdLsD4Cxz+jkgW+tljh9i70XD
 OFkAnRPMMhLS8/kddf02lLMYzYUFdy1U
 =zaFJ
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver update from Greg Kroah-Hartman:
 "Here's the big char / misc driver update for 3.10-rc1

  A number of various driver updates, the majority being new
  functionality in the MEI driver subsystem (it's now a subsystem, it
  started out just a single driver), extcon updates, memory updates,
  hyper-v updates, and a bunch of other small stuff that doesn't fit in
  any other tree.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (148 commits)
  Tools: hv: Fix a checkpatch warning
  tools: hv: skip iso9660 mounts in hv_vss_daemon
  tools: hv: use FIFREEZE/FITHAW in hv_vss_daemon
  tools: hv: use getmntent in hv_vss_daemon
  Tools: hv: Fix a checkpatch warning
  tools: hv: fix checks for origin of netlink message in hv_vss_daemon
  Tools: hv: fix warnings in hv_vss_daemon
  misc: mark spear13xx-pcie-gadget as broken
  mei: fix krealloc() misuse in in mei_cl_irq_read_msg()
  mei: reduce flow control only for completed messages
  mei: reseting -> resetting
  mei: fix reading large reposnes
  mei: revamp mei_irq_read_client_message function
  mei: revamp mei_amthif_irq_read_message
  mei: revamp hbm state machine
  Revert "drivers/scsi: use module_pcmcia_driver() in pcmcia drivers"
  Revert "scsi: pcmcia: nsp_cs: remove module init/exit function prototypes"
  scsi: pcmcia: nsp_cs: remove module init/exit function prototypes
  mei: wd: fix line over 80 characters
  misc: tsl2550: Use dev_pm_ops
  ...
2013-04-29 11:18:34 -07:00
Greg Ungerer 0d5340f93c m68k: remove unused asm/dbg.h
The contents of the m68k asm/dbg.h are never used, remove the file and
remove the one reference to it.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-04-29 09:17:58 +10:00
Jiri Slaby 37b7f3c765 TTY: fix atime/mtime regression
In commit b0de59b573 ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks.  Well, 'w', the utility to find out logged users
and their inactivity time broke.  It shows that users are inactive since
the time they logged in.

To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-26 07:59:23 -07:00
Arnd Bergmann 45efcb2d32 tty/serial/sirf: fix MODULE_DEVICE_TABLE
This fixes building the sirfsorc-uart driver as a loadable module,
which uses an incorrect MODULE_DEVICE_TABLE, by changing the reference to the
correct symbol.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-23 10:43:18 -07:00
Wolfram Sang 4c24f2c9b6 serial: mxs: drop superfluous {get|put}_device
Driver core already takes care of refcounting, no need to do this on
driver level again.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-22 10:22:21 -07:00
Wolfram Sang 4829e7650f serial: mxs: fix buffer overflow
SMATCH correctly found an off-by-one error:

drivers/tty/serial/mxs-auart.c:889 auart_console_write() error: buffer overflow 'auart_port' 5 <= 5

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-22 10:22:21 -07:00
Arnd Bergmann aabdd2901a serial: amba-pl011: fix !CONFIG_DMA_ENGINE case
I changed the prototype of the function earlier but only
in the section for CONFIG_DMA_ENGINE, not the alternative.
This makes the driver build again, e.g. for vexpress_defconfig.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-20 09:40:33 +02:00
Arnd Bergmann f54ae513d3 Merge branch 'spear/dwdma' into late/cleanup
This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 22:50:52 +02:00
Jongsung Kim 78506f223a ARM: PL011: add support for extended FIFO-size of PL011-r1p5
The latest r1p5-revision of the ARM PL011 UART has 32-byte FIFOs,
while all earlier ones have 16-byte FIFOs. This patch suggests
a way to set the FIFO-size correctly & flexibly by using a member
function named get_fifosize, rather than using the fifosize member
variable. The function takes the UARTPeriphID, and returns the
correct FIFO size.

Signed-off-by: Jongsung Kim <neidhard.kim@lge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-17 10:15:21 -07:00
Federico Vaga 5a65dcc04c serial_core.c: add put_device() after device_find_child()
The serial core uses device_find_child() but does not drop the reference to
the retrieved child after using it. This patch add the missing put_device().

What I have done to test this issue.

I used a machine with an AMBA PL011 serial driver. I tested the patch on
next-20120408 because the last branch [next-20120415] does not boot on this
board.

For test purpose, I added some pr_info() messages to print the refcount
after device_find_child() (lines: 1937,2009), and after put_device()
(lines: 1947, 2021).

Boot the machine *without* put_device(). Then:

echo reboot > /sys/power/disk
echo disk > /sys/power/state
[   87.058575] uart_suspend_port:1937 refcount 4
[   87.058582] uart_suspend_port:1947 refcount 4
[   87.098083] uart_resume_port:2009refcount 5
[   87.098088] uart_resume_port:2021 refcount 5

echo disk > /sys/power/state
[  103.055574] uart_suspend_port:1937 refcount 6
[  103.055580] uart_suspend_port:1947 refcount 6
[  103.095322] uart_resume_port:2009 refcount 7
[  103.095327] uart_resume_port:2021 refcount 7

echo disk > /sys/power/state
[  252.459580] uart_suspend_port:1937 refcount 8
[  252.459586] uart_suspend_port:1947 refcount 8
[  252.499611] uart_resume_port:2009 refcount 9
[  252.499616] uart_resume_port:2021 refcount 9

The refcount continuously increased.

Boot the machine *with* this patch. Then:

echo reboot > /sys/power/disk
echo disk > /sys/power/state
[  159.333559] uart_suspend_port:1937 refcount 4
[  159.333566] uart_suspend_port:1947 refcount 3
[  159.372751] uart_resume_port:2009 refcount 4
[  159.372755] uart_resume_port:2021 refcount 3

echo disk > /sys/power/state
[  185.713614] uart_suspend_port:1937 refcount 4
[  185.713621] uart_suspend_port:1947 refcount 3
[  185.752935] uart_resume_port:2009 refcount 4
[  185.752940] uart_resume_port:2021 refcount 3

echo disk > /sys/power/state
[  207.458584] uart_suspend_port:1937 refcount 4
[  207.458591] uart_suspend_port:1947 refcount 3
[  207.498598] uart_resume_port:2009 refcount 4
[  207.498605] uart_resume_port:2021 refcount 3

The refcount correctly handled.

Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:08:12 -07:00
Peter Hurley 579a00a5c2 tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
tty->flags needs to be atomically modified.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:08:12 -07:00
Alexander Shiyan 31815c08fc serial: sccnxp: Replace pdata.init/exit with regulator API
Typical usage of pdata.init/exit is enable/disable power and/or toggle
reset for the target chip.
This patch replaces these callbacks with regulator API.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:04:07 -07:00
Alexander Shiyan 289b8dd695 serial: sccnxp: Do not override device name
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:04:07 -07:00
Jiri Slaby f4b208eb91 TTY: pty, fix compilation warning
When CONFIG_UNIX98_PTYS is unset, we see this warning in pty:
  drivers/tty/pty.c:409:13: warning: ‘pty_unix98_shutdown’ defined but not used

Fix that by moving the function to a section which depends on that
config.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Toralf Foerster <toralf.foerster@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-15 11:02:54 -07:00