The 16G page locations have been saved during early boot in an array. The
alloc_bootmem_huge_page() function adds a page from here to the
huge_boot_pages list.
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow alloc_bootmem_huge_page() to be overridden by architectures that
can't always use bootmem. This requires huge_boot_pages to be available
for use by this function.
This is required for powerpc 16G pages, which have to be reserved prior to
boot-time. The location of these pages are indicated in the device tree.
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allow configurations with the default huge page size which is different to
the traditional HPAGE_SIZE size. The default huge page size is the one
represented in the legacy /proc ABIs, SHM, and which is defaulted to when
mounting hugetlbfs filesystems.
This is implemented with a new kernel option default_hugepagesz=, which
defaults to HPAGE_SIZE if not specified.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add an hugepagesz=... option similar to IA64, PPC etc. to x86-64.
This finally allows to select GB pages for hugetlbfs in x86 now that all
the infrastructure is in place.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Straight forward extensions for huge pages located in the PUD instead of
PMDs.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Reword sentence to clarify meaning with multiple options
- Add support for using GB prefixes for the page size
- Add extra printk to delayed > MAX_ORDER allocation code
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make some infrastructure changes to allow boot-time allocation of
different hugepage page sizes.
- move all basic hstate initialisation into hugetlb_add_hstate
- create a new function hugetlb_hstate_alloc_pages() to do the
actual initial page allocations. Call this function early in
order to allocate giant pages from bootmem.
- Check for multiple hugepages= parameters
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is needed on x86-64 to handle GB pages in hugetlbfs, because it is
not practical to enlarge MAX_ORDER to 1GB.
Instead the 1GB pages are only allocated at boot using the bootmem
allocator using the hugepages=... option.
These 1G bootmem pages are never freed. In theory it would be possible to
implement that with some complications, but since it would be a one-way
street (>= MAX_ORDER pages cannot be allocated later) I decided not to
currently.
The >= MAX_ORDER code is not ifdef'ed per architecture. It is not very
big and the ifdef uglyness seemed not be worth it.
Known problems: /proc/meminfo and "free" do not display the memory
allocated for gb pages in "Total". This is a little confusing for the
user.
Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hugetlb will need to get compound pages from bootmem to handle the case of
them being greater than or equal to MAX_ORDER. Export the constructor
function needed for this.
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Straight forward variant of the existing __alloc_bootmem_node, only
subsequent patch when allocating giant hugepages at boot -- don't want to
panic if we can't allocate as many as the user asked for.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Need this as a separate function for a future patch.
No behaviour change.
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide new hugepages user APIs that are more suited to multiple hstates
in sysfs. There is a new directory, /sys/kernel/hugepages. Underneath
that directory there will be a directory per-supported hugepage size,
e.g.:
/sys/kernel/hugepages/hugepages-64kB
/sys/kernel/hugepages/hugepages-16384kB
/sys/kernel/hugepages/hugepages-16777216kB
corresponding to 64k, 16m and 16g respectively. Within each
hugepages-size directory there are a number of files, corresponding to the
tracked counters in the hstate, e.g.:
/sys/kernel/hugepages/hugepages-64/nr_hugepages
/sys/kernel/hugepages/hugepages-64/nr_overcommit_hugepages
/sys/kernel/hugepages/hugepages-64/free_hugepages
/sys/kernel/hugepages/hugepages-64/resv_hugepages
/sys/kernel/hugepages/hugepages-64/surplus_hugepages
Of these files, the first two are read-write and the latter three are
read-only. The size of the hugepage being manipulated is trivially
deducible from the enclosing directory and is always expressed in kB (to
match meminfo).
[dave@linux.vnet.ibm.com: fix build]
[nacc@us.ibm.com: hugetlb: hang off of /sys/kernel/mm rather than /sys/kernel]
[nacc@us.ibm.com: hugetlb: remove CONFIG_SYSFS dependency]
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add the ability to configure the hugetlb hstate used on a per mount basis.
- Add a new pagesize= option to the hugetlbfs mount that allows setting
the page size
- This option causes the mount code to find the hstate corresponding to the
specified size, and sets up a pointer to the hstate in the mount's
superblock.
- Change the hstate accessors to use this information rather than the
global_hstate they were using (requires a slight change in mm/memory.c
so we don't NULL deref in the error-unmap path -- see comments).
[np: take hstate out of hugetlbfs inode and vma->vm_private_data]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add basic support for more than one hstate in hugetlbfs. This is the key
to supporting multiple hugetlbfs page sizes at once.
- Rather than a single hstate, we now have an array, with an iterator
- default_hstate continues to be the struct hstate which we use by default
- Add functions for architectures to register new hstates
[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The goal of this patchset is to support multiple hugetlb page sizes. This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg. huge page
size, number of huge pages currently allocated, etc).
The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.
This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.
Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.
[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a kobject to create /sys/kernel/mm when sysfs is mounted. The kobject
will exist regardless. This will allow for the hugepage related sysfs
directories to exist under the mm "subsystem" directory. Add an ABI file
appropriately.
[kosaki.motohiro@jp.fujitsu.com: fix build]
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have a request for tmpfs to support the AIO interface: easily done, no
more than replacing the old shmem_file_read by shmem_file_aio_read,
cribbed from generic_file_aio_read. (In 2.6.25 its write side was already
changed to use generic_file_aio_write.)
Incorporate cleanups from Andrew Morton and Harvey Harrison.
Tests out fine with LTP's ltp-aiodio.sh, given hacks (not included) to
support O_DIRECT. tmpfs cannot honestly support O_DIRECT: its
cache-avoiding-IO nature is at odds with direct IO-avoiding-cache.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As akpm points out, there's really no need for generic_file_aio_read to
make a special case of count 0: just loop through nr_segs doing nothing.
And as Harvey Harrison points out, there's no need to reset retval to 0
where it's already 0.
Setting count (or ocount) to 0 before calling generic_segment_checks is
unnecessary too; but reluctantly I'll leave that removal to someone with a
wider range of gcc versions to hand - 4.1.2 and 4.2.1 don't warn about it,
but perhaps others do - I forget which are the warniest versions.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a hugetlb mapping with a reservation is split, a new VMA is cloned
from the original. This new VMA is a direct copy of the original
including the reservation count. When this pair of VMAs are unmapped we
will incorrect double account the unused reservation and the overall
reservation count will be incorrect, in extreme cases it will wrap.
The problem occurs when we split an existing VMA say to unmap a page in
the middle. split_vma() will create a new VMA copying all fields from the
original. As we are storing our reservation count in vm_private_data this
is also copies, endowing the new VMA with a duplicate of the original
VMA's reservation. Neither of the new VMAs can exhaust these reservations
as they are too small, but when we unmap and close these VMAs we will
incorrect credit the remainder twice and resv_huge_pages will become out
of sync. This can lead to allocation failures on mappings with
reservations and even to resv_huge_pages wrapping which prevents all
subsequent hugepage allocations.
The simple fix would be to correctly apportion the remaining reservation
count when the split is made. However the only hook we have vm_ops->open
only has the new VMA we do not know the identity of the preceeding VMA.
Also even if we did have that VMA to hand we do not know how much of the
reservation was consumed each side of the split.
This patch therefore takes a different tack. We know that the whole of
any private mapping (which has a reservation) has a reservation over its
whole size. Any present pages represent consumed reservation. Therefore
if we track the instantiated pages we can calculate the remaining
reservation.
This patch reuses the existing regions code to track the regions for which
we have consumed reservation (ie. the instantiated pages), as each page
is faulted in we record the consumption of reservation for the new page.
When we need to return unused reservations at unmap time we simply count
the consumed reservation region subtracting that from the whole of the
map. During a VMA split the newly opened VMA will point to the same
region map, as this map is offset oriented it remains valid for both of
the split VMAs. This map is referenced counted so that it is removed when
all VMAs which are part of the mmap are gone.
Thanks to Adam Litke and Mel Gorman for their review feedback.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By default all shared mappings and most private mappings now have
reservations associated with them. This improves semantics by providing
allocation guarentees to the mapper. However a small number of
applications may attempt to make very large sparse mappings, with these
strict reservations the system will never be able to honour the mapping.
This patch set brings MAP_NORESERVE support to hugetlb files. This allows
new mappings to be made to hugetlbfs files without an associated
reservation, for both shared and private mappings. This allows
applications which want to create very sparse mappings to opt-out of the
reservation system. Obviously as there is no reservation they are liable
to fault at runtime if the huge page pool becomes exhausted; buyer beware.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The following patch will require use of the reservation regions support.
Move this earlier in the file. No changes have been made to this code.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With Mel's hugetlb private reservation support patches applied, strict
overcommit semantics are applied to both shared and private huge page
mappings. This can be a problem if an application relied on unlimited
overcommit semantics for private mappings. An example of this would be an
application which maps a huge area with the intention of using it very
sparsely. These application would benefit from being able to opt-out of
the strict overcommit. It should be noted that prior to hugetlb
supporting demand faulting all mappings were fully populated and so
applications of this type should be rare.
This patch stack implements the MAP_NORESERVE mmap() flag for huge page
mappings. This flag has the same meaning as for small page mappings,
suppressing reservations for that mapping.
Thanks to Mel Gorman for reviewing a number of early versions of these
patches.
This patch:
When a small page mapping is created with mmap() reservations are created
by default for any memory pages required. When the region is read/write
the reservation is increased for every page, no reservation is needed for
read-only regions (as they implicitly share the zero page). Reservations
are tracked via the VM_ACCOUNT vma flag which is present when the region
has reservation backing it. When we convert a region from read-only to
read-write new reservations are aquired and VM_ACCOUNT is set. However,
when a read-only map is created with MAP_NORESERVE it is indistinguishable
from a normal mapping. When we then convert that to read/write we are
forced to incorrectly create reservations for it as we have no record of
the original MAP_NORESERVE.
This patch introduces a new vma flag VM_NORESERVE which records the
presence of the original MAP_NORESERVE flag. This allows us to
distinguish these two circumstances and correctly account the reserve.
As well as fixing this FIXME in the code, this makes it much easier to
introduce MAP_NORESERVE support for huge pages as this flag is available
consistantly for the life of the mapping. VM_ACCOUNT on the other hand is
heavily used at the generic level in association with small pages.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Create some new accessors for vma private data to cut down on and contain
the casts. Encapsulates the huge and small page offset calculations.
Also adds a couple of VM_BUG_ONs for consistency.
[akpm@linux-foundation.org: Make things static]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork(). At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.
We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork(). Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after. A failure here would be very undesirable.
Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad. The following situation is allowed to occur today.
1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
had taken care to ensure the pages existed
This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap(). When the parent performs COW, it
will try to satisfy the allocation without using reserves. If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure. If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.
To summarise the new behaviour:
1. If the original mapper performs COW on a private mapping with multiple
references, it will attempt to allocate a hugepage from the pool or
the buddy allocator without using the existing reserves. On fail, VMAs
mapping the same area are traversed and the page being COW'd is unmapped
where found. It will then steal the original page as the last mapper in
the normal way.
2. The VMAs the pages were unmapped from are flagged to note that pages
with data no longer exist. Future no-page faults on those VMAs will
terminate the process as otherwise it would appear that data was corrupted.
A warning is printed to the console that this situation occured.
2. If the child performs COW first, it will attempt to satisfy the COW
from the pool if there are enough pages or via the buddy allocator if
overcommit is allowed and the buddy allocator can satisfy the request. If
it fails, the child will be killed.
If the pool is large enough, existing applications will not notice that
the reserves were a factor. Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().
[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch reserves huge pages at mmap() time for MAP_PRIVATE mappings in
a similar manner to the reservations taken for MAP_SHARED mappings. The
reserve count is accounted both globally and on a per-VMA basis for
private mappings. This guarantees that a process that successfully calls
mmap() will successfully fault all pages in the future unless fork() is
called.
The characteristics of private mappings of hugetlbfs files behaviour after
this patch are;
1. The process calling mmap() is guaranteed to succeed all future faults until
it forks().
2. On fork(), the parent may die due to SIGKILL on writes to the private
mapping if enough pages are not available for the COW. For reasonably
reliable behaviour in the face of a small huge page pool, children of
hugepage-aware processes should not reference the mappings; such as
might occur when fork()ing to exec().
3. On fork(), the child VMAs inherit no reserves. Reads on pages already
faulted by the parent will succeed. Successful writes will depend on enough
huge pages being free in the pool.
4. Quotas of the hugetlbfs mount are checked at reserve time for the mapper
and at fault time otherwise.
Before this patch, all reads or writes in the child potentially needs page
allocations that can later lead to the death of the parent. This applies
to reads and writes of uninstantiated pages as well as COW. After the
patch it is only a write to an instantiated page that causes problems.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is a patchset to give reliable behaviour to a process that
successfully calls mmap(MAP_PRIVATE) on a hugetlbfs file. Currently, it
is possible for the process to be killed due to a small hugepage pool size
even if it calls mlock().
MAP_SHARED mappings on hugetlbfs reserve huge pages at mmap() time. This
guarantees all future faults against the mapping will succeed. This
allows local allocations at first use improving NUMA locality whilst
retaining reliability.
MAP_PRIVATE mappings do not reserve pages. This can result in an
application being SIGKILLed later if a huge page is not available at fault
time. This makes huge pages usage very ill-advised in some cases as the
unexpected application failure cannot be detected and handled as it is
immediately fatal. Although an application may force instantiation of the
pages using mlock(), this may lead to poor memory placement and the
process may still be killed when performing COW.
This patchset introduces a reliability guarantee for the process which
creates a private mapping, i.e. the process that calls mmap() on a
hugetlbfs file successfully. The first patch of the set is purely
mechanical code move to make later diffs easier to read. The second patch
will guarantee faults up until the process calls fork(). After patch two,
as long as the child keeps the mappings, the parent is no longer
guaranteed to be reliable. Patch 3 guarantees that the parent will always
successfully COW by unmapping the pages from the child in the event there
are insufficient pages in the hugepage pool in allocate a new page, be it
via a static or dynamic pool.
Existing hugepage-aware applications are unlikely to be affected by this
change. For much of hugetlbfs's history, pages were pre-faulted at mmap()
time or mmap() failed which acts in a reserve-like manner. If the pool is
sized correctly already so that parent and child can fault reliably, the
application will not even notice the reserves. It's only when the pool is
too small for the application to function perfectly reliably that the
reserves come into play.
Credit goes to Andy Whitcroft for cleaning up a number of mistakes during
review before the patches were released.
This patch:
A later patch in this set needs to call hugetlb_acct_memory() before it is
defined. This patch moves the function without modification. This makes
later diffs easier to read.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_area_init_node() gets passed in the node id as well as the node
descriptor. This is redundant as the function can trivially get the node
descriptor itself by means of NODE_DATA() and the node's id.
I checked all the users and NODE_DATA() seems to be usable everywhere
from where this function is called.
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is called on a per-page basis and in the vast majority of cases
`error' is zero.
Cc: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLOB reuses two page bits for internal purposes, it overlays PG_active and
PG_private. This is hidden away in slob.c. Document these overlays
explicitly in the main page-flags enum along with all the others.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLUB reuses two page bits for internal purposes, it overlays PG_active and
PG_error. This is hidden away in slub.c. Document these overlays
explicitly in the main page-flags enum along with all the others.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the recent page flag reorganisation we have a single enum which
defines the valid page flags and their values, nice and clear. However
there are a number of bits which are overloaded by different subsystems.
Firstly there is PG_owner_priv_1 which is used by filesystems and by XEN.
Secondly both SLOB and SLUB use a couple of extra page bits to manage
internal state for pages they own; both overlay other bits. All of these
"aliases" are scattered about the source making it very hard for a reader
to know if the bits are safe to rely on in all contexts; confusion here is
bad.
As we now have a single place where the bits are clearly assigned it makes
sense to clarify the reuse of bits by making the aliases explicit and
visible with the original bit assignments. This patch creates explicit
aliases within the enum itself for the overloaded bits, creates standard
bit accessors PageFoo etc. and uses those throughout.
This version pulls the bit manipulation out to standard named page bit
accessors as suggested by Christoph, it retains the explicit mapping to
the overlayed bits. A fusion of both ideas. This has been SLUB and SLOB
have been compile tested on x86_64 only, and SLUB boot tested. If people
feel this is worth doing then I can run a fuller set of testing.
This patch:
Some page flags are used for more than one purpose, for example
PG_owner_priv_1. Currently there are individual accessors for each user,
each built using the common flag name far away from the bit definitions.
This makes it hard to see all possible uses of these bits.
Now that we have a single enum to generate the bit orders it makes sense
to express overlays in the same place. So create per use aliases for this
bit in the main page-flags enum and use those in the accessors.
[akpm@linux-foundation.org: fix xen]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Summary]
Split LRU-list of unused dentries to one per superblock to avoid soft
lock up during NFS mounts and remounting of any filesystem.
Previously I posted here:
http://lkml.org/lkml/2008/3/5/590
[Descriptions]
- background
dentry_unused is a list of dentries which are not referenced.
dentry_unused grows up when references on directories or files are
released. This list can be very long if there is huge free memory.
- the problem
When shrink_dcache_sb() is called, it scans all dentry_unused linearly
under spin_lock(), and if dentry->d_sb is differnt from given
superblock, scan next dentry. This scan costs very much if there are
many entries, and very ineffective if there are many superblocks.
IOW, When we need to shrink unused dentries on one dentry, but scans
unused dentries on all superblocks in the system. For example, we scan
500 dentries to unmount a filesystem, but scans 1,000,000 or more unused
dentries on other superblocks.
In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink
unused dentries on NFS, but scans 100,000,000 unused dentries on
superblocks in the system such as local ext3 filesystems. I hear NFS
mounting took 1 min on some system in use.
* : NFS uses virtual filesystem in rpc layer, so NFS is affected by
this problem.
100,000,000 is possible number on large systems.
Per-superblock LRU of unused dentried can reduce the cost in
reasonable manner.
- How to fix
I found this problem is solved by David Chinner's "Per-superblock
unused dentry LRU lists V3"(1), so I rebase it and add some fix to
reclaim with fairness, which is in Andrew Morton's comments(2).
1) http://lkml.org/lkml/2006/5/25/318
2) http://lkml.org/lkml/2006/5/25/320
Split LRU-list of unused dentries to each superblocks. Then, NFS
mounting will check dentries under a superblock instead of all. But
this spliting will break LRU of dentry-unused. So, I've attempted to
make reclaim unused dentrins with fairness by calculate number of
dentries to scan on this sb based on following way
number of dentries to scan on this sb =
count * (number of dentries on this sb / number of dentries in the machine)
- ToDo
- I have to measuring performance number and do stress tests.
- When unmount occurs during prune_dcache(), scanning on same
superblock, It is unable to reach next superblock because it is gone
away. We restart scannig superblock from first one, it causes
unfairness of reclaim unused dentries on first superblock. But I think
this happens very rarely.
- Test Results
Result on 6GB boxes with excessive unused dentries.
Without patch:
$ cat /proc/sys/fs/dentry-state
10181835 10180203 45 0 0 0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real 0m1.830s
user 0m0.001s
sys 0m1.653s
With this patch:
$ cat /proc/sys/fs/dentry-state
10236610 10234751 45 0 0 0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real 0m0.106s
user 0m0.002s
sys 0m0.032s
[akpm@linux-foundation.org: fix comments]
Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Chinner <dgc@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __free_one_page(), the comment "Move the buddy up one level" appears
attached to the break and by implication when the break is taken we are
moving it up one level:
if (!page_is_buddy(page, buddy, order))
break; /* Move the buddy up one level. */
In reality the inverse is true, we break out when we can no longer merge
this page with its buddy. Looking back into pre-history (into the full
git history) it appears that these two lines accidentally got joined as
part of another change.
Move the comment down where it belongs below the if and clarify its
language.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The double indirection here is not needed anywhere and hence (at least)
confusing.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This uses the new vm_ops->access to allow gdb to access the SPU local
store. We currently prevent access to problem state registers, this can
be done later if really needed but it's safer not to.
[akpm@linux-foundation.org: fix typo]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This adds ioremap_prot and pte_pgprot() so that one can extract protection
bits from a PTE and use them to ioremap_prot() (in order to support ptrace
of VM_IO | VM_PFNMAP as per Rik's patch).
This moves a couple of flag checks around in the ioremap implementations
of arch/powerpc. There's a side effect of allowing non-cacheable and
non-guarded mappings on ppc32 which before would always have _PAGE_GUARDED
set whenever _PAGE_NO_CACHE is.
(standard ioremap will still set _PAGE_GUARDED, but ioremap_prot will be
capable of setting such a non guarded mapping).
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use generic_access_phys as the access_process_vm access function for
/dev/mem mappings. This makes it possible to debug the X server.
[akpm@linux-foundation.org: repair all the architectures which broke]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to be able to debug things like the X server and programs using
the PPC Cell SPUs, the debugger needs to be able to access device memory
through ptrace and /proc/pid/mem.
This patch:
Add the generic_access_phys access function and put the hooks in place
to allow access_process_vm to access device or PPC Cell SPU memory.
[riel@redhat.com: Add documentation for the vm_ops->access function]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are no users of nopfn in the tree. Remove it.
[hugh@veritas.com: fix build error]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generic_file_direct_IO is a common helper around the invocation of
->direct_IO. But there's almost nothing shared between the read and write
side, so we're better off without this helper.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's confusing that set_max_huge_pages() contained two different
variables named "ret", and although the code works correctly this should
be fixed.
The inner of the two variables can simply be removed.
Spotted by sparse.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "KOSAKI Motohiro" <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds proper extern declarations for five variables in
include/linux/vmstat.h
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every file should include the headers containing the externs for its
global functions (in this case for sys_move_pages()).
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two zonelist patch series rewrote __page_alloc() largely. Now, it is just
a wrapper function. Inlining them will save a function call.
[akpm@linux-foundation.org: export __alloc_pages_internal]
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
