Commit Graph

743 Commits

Author SHA1 Message Date
Axel Lin 1146f8822a gpio: rdc321x: Prevent removal of modules exporting active GPIOs
This driver can be built as a module, set the missing owner field of
struct gpio_chip to prevent removal of modules exporting active GPIOs.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01 12:52:24 +02:00
Axel Lin dd2914972e gpio: em: Fix checking return value of irq_alloc_descs
irq_alloc_descs() returns negative error code on failure.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01 01:18:39 +02:00
Axel Lin 4c30aa33d4 gpio: mc9s08dz60: Fix build error if I2C=m
Make GPIO_MC9S08DZ60 depend on I2C=y, this fixes below build error:

  LD      init/built-in.o
drivers/built-in.o: In function `mc9s08dz60_get_value':
clk-fixed-factor.c:(.text+0x7214): undefined reference to `i2c_smbus_read_byte_data'
drivers/built-in.o: In function `mc9s08dz60_set':
clk-fixed-factor.c:(.text+0x727c): undefined reference to `i2c_smbus_read_byte_data'
clk-fixed-factor.c:(.text+0x72bc): undefined reference to `i2c_smbus_write_byte_data'
drivers/built-in.o: In function `mc9s08dz60_i2c_driver_init':
clk-fixed-factor.c:(.init.text+0x290): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `mc9s08dz60_i2c_driver_exit':
clk-fixed-factor.c:(.exit.text+0x2c): undefined reference to `i2c_del_driver'
make: *** [vmlinux] Error 1

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-01 01:00:39 +02:00
Thierry Reding c61307a7cc gpio: Fix debug message in of_get_named_gpio_flags()
This was probably missed in the conversion done in commit 3d0f7cf
("gpio: Adjust of_xlate API to support multiple GPIO chips").

Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-17 07:35:25 +02:00
Arnd Bergmann f43e04ec46 GPIO: gpio-pxa: fix building without CONFIG_OF
Commit 7212157267 ("GPIO: gpio-pxa: fix devicetree functions") added an
"xlate" function pointer to the irq_domain_ops, but this function is nor
declared or defined anywhere when CONFIG_OF is disabled, causing the
build error:

  drivers/gpio/gpio-pxa.c:532:11: error: 'irq_domain_xlate_twocell' undeclared here (not in a function)

Extending the DT-only code section to cover the irq_domain_ops and the
pxa_gpio_dt_ids solves this problem and makes it clearer which code is
actually used without DT.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-14 07:50:36 +03:00
Linus Torvalds 21d2f8dc91 gpio fixes for v3.6-rc1
- Fix a resource leak in the SCH driver
 - Fix the register address calculation in the MSIC driver
 - Fix the PXA driver's devicetree functions
 - Delete redundant shadow variable leftovers in the MXC driver
 - Specify the GPIO base for the device tree probe in the MXC driver
 - Add a modalias for the i.MX driver
 - Fix off-by-one bug in the Samsung driver
 - Fix erroneous errorpath in the Langwell driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQJKytAAoJEEEQszewGV1zvKoQAMb3n+VEQKWt5OOsvPAN2w+r
 /qcCU8hfB8CRFNK5/v1an56V8mqdfnn32MNcw8BszE/HxDnlVIdvc/czHnhHO5em
 PipfAWCUw33WBr460bUkv7Oie92Q6JrVVRg5xn8s5+tI8SBlXQZ66qzXfb9yDaof
 GMulHVpwC3XCeUrEh6ce6o0UisvYrhF+iME4zubto88bWlAx9Te0r7TnRmFzIS2a
 Jh2uuNDKlu0EKo3wTnkxeU7YK0A6qEW2RzAd5MR8okToiNqdnp9hobRGcnLyUZ2q
 WbRlN2N6SJutKl5/ceP0XlnNUocQIUhd7lkoN/jw4Fliej0CwlRzFiILEmL3H+Rr
 IIunZQjDo1v/I+2wuQyWx9iyK3YMzJHD7bcP0/jCeShI3Tl8zUHBZ9xOlJqtGAn4
 utNjRFoOjsQO+GggPzaVgEqMJNEKXV5kzfEpdlh7U1nqlEYjCRVlikKJEfUhzYE4
 C8fs2u4wE5Y2kGwxO4kuvB/XssE+yR4db1I1iucIBJLnyMt99TR2cKXc1iteSd/s
 zPeJgKEahbwPoIYDqw6U962f0QlSyGfCu7TypEKALmCROwNACkUfvRluCLLV+KV7
 VLzaAAcByqb2jtHMOXm796VGXrMt2hvqW4ZBfAXSlf6uIcVsW/2wJFI3Lj81Ziap
 65MsR+sChlY32QDxBAoO
 =WsZj
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull gpio fixes from Linus Walleij:
 - Fix a resource leak in the SCH driver
 - Fix the register address calculation in the MSIC driver
 - Fix the PXA driver's devicetree functions
 - Delete redundant shadow variable leftovers in the MXC driver
 - Specify the GPIO base for the device tree probe in the MXC driver
 - Add a modalias for the i.MX driver
 - Fix off-by-one bug in the Samsung driver
 - Fix erroneous errorpath in the Langwell driver

* tag 'gpio-fixes-v3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  drivers/gpio/gpio-langwell.c: fix error return code
  gpio: samsung: Fix off-by-one bug in gpio addresses
  ARM: dts: imx: add alias for gpio
  gpio/mxc: specify gpio base for device tree probe
  gpio/mxc: remove redundant shadow variables initialization
  GPIO: gpio-pxa: fix devicetree functions
  gpio: msic: Fix calculating register address in msic_gpio_to_oreg()
  gpio-sch: Fix leak of resource
2012-08-12 21:45:33 +03:00
Arnd Bergmann 38eaed327d gpio: em: do not discard em_gio_irq_domain_cleanup
The newly added gpio-em driver marks its em_gio_irq_domain_cleanup
function as __devexit, which would lead to that function being
discarded in case CONFIG_HOTPLUG is disabled. However, the function
is also called by the error handling logic em_gio_probe, which
would cause a jump into a NULL pointer if it was removed from the
kernel or module.

Without this patch, building kzm9d_defconfig results in:

WARNING: drivers/gpio/built-in.o(.devinit.text+0x330): Section mismatch in reference from the function em_gio_probe() to the function .devexit.text:em_gio_irq_domain_cleanup()
The function __devinit em_gio_probe() references
a function __devexit em_gio_irq_domain_cleanup().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
em_gio_irq_domain_cleanup() so it may be used outside an exit section.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Magnus Damm <damm@opensource.se>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
2012-08-10 12:27:46 +02:00
Julia Lawall d6a2b7ba67 drivers/gpio/gpio-langwell.c: fix error return code
Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:55:52 +02:00
Sean Paul f7093f3e7a gpio: samsung: Fix off-by-one bug in gpio addresses
Move gpc4 to the end of the automatically processed gpio controllers so
we don't taint the automatic offset calculation.

This bug caused all controllers coming after gpc4 to map to the
incorrect address. The result is <&gpd1 0 0 0 0> would actually map to
GPIO 0 in gpd0.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:55:52 +02:00
Shawn Guo 7e6086d9e5 gpio/mxc: specify gpio base for device tree probe
Currently, unlike the non-DT probe where the gpio base is specified
with pdev->id, the DT probe uses the base dynamically allocated by
gpio core, which uses a completely different numbering scheme.  This
causes two issues to user space applications which access sysfs entry
/sys/class/gpio/gpioN.

* It breaks the compatibility with user space applications between
  non-DT and DT kernels.

* It's not intuitive and sometimes hard for users to map the Linux
  gpio number to the actual hardware pin.

Use alias to identify the gpio port/bank, and then the gpio base
can be specified with port id to solve above issues.  If alias is not
defined in device tree, the base number dynamically allocated by gpio
core will be used.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:55:22 +02:00
Shawn Guo f6b0ca25ee gpio/mxc: remove redundant shadow variables initialization
With commit 3e11f7b (gpio/generic: initialize basic_mmio_gpio shadow
variables properly) in place, the shadow variables initialization is
being done in generic driver bgpio_init call.

Remove the redundant shadow variables initialization from gpio-mxc
driver.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-07 08:43:26 +02:00
Daniel Mack 7212157267 GPIO: gpio-pxa: fix devicetree functions
Provide an of_xlate function for the PXA GPIO chips and make it work for
devicetree environments.

Successfully tested on a PXA3xx board.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 11:39:41 +02:00
Axel Lin f7da0bdbf5 gpio: msic: Fix calculating register address in msic_gpio_to_oreg()
In the case offset is 20 ... 23, the equation to get the register should be:
        INTEL_MSIC_GPIO1HV0CTLO - offset + 20

With above equation, we can get below mapping between offset and the register:
        offset is 20: INTEL_MSIC_GPIO1HV0CTLO
        offset is 21: INTEL_MSIC_GPIO1HV1CTLO
        offset is 22: INTEL_MSIC_GPIO1HV2CTLO
        offset is 23: INTEL_MSIC_GPIO1HV3CTLO

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 01:09:50 +02:00
Alan Cox 8abdd2d2d8 gpio-sch: Fix leak of resource
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-08-05 00:33:48 +02:00
Linus Torvalds 3e701cdfe6 MFD bits for the 3.6 merge window.
We have support for a few new drivers:
 - Samsung s2mps11
 - Wolfson Microelectronics wm5102 and wm5110
 - Marvell 88PM800 and 88PM805
 - TI twl6041
 
 We also have our regular driver improvements:
 - Device tree and IRQ domain support for STE AB8500
 - Regmap and devm_* API conversion for TI tps6586x
 - Device tree support for Samsung max77686
 - devm_* API conversion for STE AB3100
 
 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
 tps65090, da9052 and twl-core.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQFpGVAAoJEIqAPN1PVmxKFNoP/1dkYngrxxV6cxdyLJ74APhG
 lVKPgaDxQhdgfwCZJmMeZK1UphZo80cWnEXG6sTHZUEQdTaslSJu5SuPfUM+fo7e
 52/dU0nx0ZE04pwPQLHbidS4TmHlbLg9oM2kmIf9RO5rg34GodwVgRL/4+k1qvhz
 aWYJt9erFhQOpqaSX66mXHSuhvzHypbcE7d2B2Ykmh3NoYiH2w9H9KmIbbb+ZLq8
 +Bp/i5Ys/vfooo+8IE2w6KZfIzMwsmmtWjjr/38yuQJaKZCh/zn23DM9HsdrVf++
 RzfniRF4YBxmeKi7zi8MFIYys8filTCXA9dXbGSAKCuUCT37yZRnUxTeN1bn7Bux
 A7KRpG7pUKQKVKqCTndvK5LcQKlT33XyW2ZzV1wVWX2JkCJ+gilPeykb8IabNvGX
 nIp0STEGR/WdCLEAKo8pJF7Usn0RuUzAug02SG/mQ6dpnLoZqp0Od5W7gRhT7M7h
 hXr/xKJ6cG5YwicpAdy5kJJ0dRgQrtaHwxrF0B68AXZ7CmAtkPuEGCYhUCFnGQUH
 XJ0CodAqqVBRyYiQS4zIpIh2nqhIdsgv4OC1+kVLbubQk+PR88zG9Jvg6i1HQi/A
 OHi7N5Wite3YUrs3sBzDKnEc/Il2YRhVaz2SLVNfZR0PS7hywHN3rK/tVFINTgei
 jNEz1H6hu7ToNLfs0UzP
 =c28c
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD bits from Samuel Ortiz:
 "We have support for a few new drivers:
   - Samsung s2mps11
   - Wolfson Microelectronics wm5102 and wm5110
   - Marvell 88PM800 and 88PM805
   - TI twl6041

  We also have our regular driver improvements:
   - Device tree and IRQ domain support for STE AB8500
   - Regmap and devm_* API conversion for TI tps6586x
   - Device tree support for Samsung max77686
   - devm_* API conversion for STE AB3100

  Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910,
  tps65090, da9052 and twl-core."

Fix up mostly trivial conflicts, with the exception of
drivers/usb/host/ehci-omap.c in particular, which had some
re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI:
centralize controller initialization") that clashed with commit
2761a63945 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix
issues").

In particular, commit 2761a63945 moved the usb_add_hcd() to the
*middle* of the reset sequence, which clashes fairly badly with the
reset sequence re-organization (although it could have been done inside
the new omap_ehci_init() function).

I left that part of commit 2761a63945 just undone.

* tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits)
  mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core
  mfd: Arizone core should select MFD_CORE
  mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ
  mfd: Add debug trace on entering and leaving arizone runtime suspend
  mfd: Correct tps65090 cell names
  mfd: Remove gpio support from tps6586x core driver
  ARM: tegra: defconfig: Enable tps6586x gpio
  gpio: tps6586x: Add gpio support through platform driver
  mfd: Cache tps6586x register through regmap
  mfd: Use regmap for tps6586x register access.
  mfd: Use devm managed resources for tps6586x
  input: Add onkey support for 88PM80X PMIC
  mfd: Add support for twl6041
  mfd: Fix twl6040 revision information
  mfd: Matches should be NULL when populate anatop child devices
  input: ab8500-ponkey: Create AB8500 domain IRQ mapping
  mfd: Add missing out of memory check for pcf50633
  Documentation: Describe the AB8500 Device Tree bindings
  mfd: Add tps65910 32-kHz-crystal-input init
  mfd: Drop modifying mc13xxx driver's id_table in probe
  ...
2012-07-30 12:41:17 -07:00
Linus Torvalds f948ad0787 GPIO changes for v3.6:
- New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to
   GPIO will now hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung
   MXC, OMAP and PCA953X drivers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQEHMDAAoJEEEQszewGV1zwPYP/jkxBzvEl+iEO0RFwT4PtmCi
 Y8JOJNT1bw/3MHPcRT12E+gzj01S9GldbuaUObcudmnnynpjeC0S8JNhSKGD9uHa
 TTcCcMbZiKzJyZr/OL8EId7W1FGUO+51uB4hqEKCHMWRY/PBIjKxhvtj+BKEWyvn
 OVhWCxo2O7lv7rzeKiPc8WJMiodLS1urbZEyz7IADZtT3m8vu146rEQRvbNSSXa0
 AJfl494XX1sbv0tzYzvE66+vjvvkgsjHq3O7On5b2svdnZGpAL/6CjEUVrpBXr4K
 NPKuq9TsLfVMH3w3xvQ70PoA7M0L+KvKcdjTvgZpf2KLIU7dwoL91PzAupcjSTr1
 SkcTPtNFxuaRy0cFD+ZAwL2eIOGaNxk6N4tj1da35QjCUkNROHG5K6ByIL1e1ewO
 NuxAyn7QLrYdmXzBc5/DhZiBA0ShqoYg4oEgBDZklOKqjT3mqmjQbDq8i0Qy197W
 lb3Barg+WWm+NW1kmPYnrOJUZXa1ApVHuz8db7OrcUy5kTcUhVTY3DcQzFgG1CZT
 H284c9Zm8WaP814jE8SzLMGeFaCuI63xFMNkpnba11Bt+8Cr1I+LjWSd+ttCFdVm
 W9t/fMEX1bVpVrbTKMvcwm7AwnoeOUEwJCqAICLe5OE/1mEvanyjNXX4wfFP58jv
 OlQ/a9REqoOLAvvbV2qp
 =tujx
 -----END PGP SIGNATURE-----

Merge tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO changes from Linus Walleij:
 - New driver for AMD-8111 southbridge GPIOs
 - New driver for Wolfson Micro Arizona devices
 - Propagate device tree parse errors
 - Probe deferral finalizations - all expected calls to GPIO will now
   hopefully request deferral where apropriate
 - Misc updates to TCA6424, WM8994, LPC32xx, PCF857x, Samsung MXC, OMAP
   and PCA953X drivers.

Fix up gpio_idx conflicts in drivers/gpio/gpio-mxc.c

* tag 'gpio-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available
  gpiolib: Defer failed gpio requests by default
  MAINTAINERS: add entry OMAP GPIO driver
  gpio/pca953x: increase variables size to support 24 bit of data
  GPIO: PCA953X: Increase size of invert variable to support 24 bit
  gpio/omap: move bank->dbck initialization to omap_gpio_mod_init()
  gpio/mxc: use the edge_sel feature if available
  gpio: propagate of_parse_phandle_with_args errors
  gpio: samsung: add flags specifier to device-tree binding
  gpiolib: Add support for Wolfson Microelectronics Arizona class devices
  gpio: gpio-lpc32xx: Add gpio_to_irq mapping
  gpio: pcf857x: share 8/16 bit access functions
  gpio: LPC32xx: Driver cleanup
  MAINTAINERS: Add Wolfson gpiolib drivers to the Wolfson entry
  gpiolib: wm8994: Convert to devm_kzalloc()
  gpiolib: wm8994: Use irq_domain mappings for gpios
  gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips
  gpio/tca6424: merge I2C transactions, remove cast
  gpio/of: fix a typo of comment message
2012-07-26 13:56:38 -07:00
Laxman Dewangan 72bd986030 gpio: tps6586x: Add gpio support through platform driver
Converting the gpio driver of tps6586x to a platform
driver in place of registering the gpio through core
driver.
The motivation of the change is:
- This is inline with the mfd drivers implementation.
- This will move the related gpio support to gpio driver
  folder where all gpio related drivers are available.
  This will be easy the maintenance and enhancement is
  anything done for gpio.
- The gpio functionality can be selected through config
  variable.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-25 00:36:54 +02:00
Linus Torvalds 3645f0cd96 arm-soc: sparse IRQ conversion
The I.MX platform is getting converted to use sparse IRQs. We are doing
 this for all platforms over time, because this is one of the
 requirements for building a multiplatform kernel, and generally a good
 idea.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIVAwUAUA2dgGCrR//JCVInAQJOJRAA4xWh3CUqpuJ13yk2tOBcGU9+orer93fP
 U3DAG6jJ75blQzfA9wBoWPjqFhJo76ZtLFA9comkGI4vH8nTNNbXr1ZNt2/PjOGS
 PqZIYJk/f5QqOzCd10V5bK4EVFR/mjvQ8sBP8qfaHII0GVPomfa8jnXnFnLFjreX
 hhucTCf4z2HBvIjfOiilPtJbFpdrQ9oquM4W4Go1lrMZMU8B+Z3ClqytoxYW2Bw3
 uQ0EzFlAwaXZ1CMcDn4eQJxNt8dO4SbGI7AHd3HmW3tFaaJC9dpey/7pIoW3gyz8
 2e3wrdHXCAYq3sUlwzIrROCcBfW502E+KUmDi8ePT7zgZmxAmrqRCTNEqwaaGYrS
 Q/mk+Kpnjvtl6w21ss1LxNHP18TNL/f8isYW9vUQG8yogWlVin6NhPvNQXDDBWoD
 lfAyeL5JSoVxVGxft8EhLI/inPKBnWe2heE+zrRGQzUhTuUSyspmwK6o3b7JYNTX
 16fY6OhW90CaZm6r1yKZsiE96Dd63oL4OVFELsgPQdsBNdWeKmOjs6fq46Bp0Hdf
 SAQ543yabPkDr4ZanaNqo0s3Vu2xVnvBS4FR0gbx6+LGuagkmBpSkYnlhgNJBbdK
 6D5GCRoX0ayzJvg29kKzek2h8NhGtDco4dr7K5Hl9NebeZ++CjZ7xTbFQN6olt+D
 8CcIdD2J0PY=
 =Y2Sm
 -----END PGP SIGNATURE-----

Merge tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc sparse IRQ conversion from Arnd Bergmann:
 "The I.MX platform is getting converted to use sparse IRQs.  We are
  doing this for all platforms over time, because this is one of the
  requirements for building a multiplatform kernel, and generally a good
  idea."

* tag 'irq' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: select USE_OF
  ARM: imx: Fix build error due to missing irqs.h include
  ARM: imx: enable SPARSE_IRQ for imx platform
  ARM: fiq: change FIQ_START to a variable
  tty: serial: imx: remove the use of MXC_INTERNAL_IRQS
  ARM: imx: remove unneeded mach/irq.h inclusion
  i2c: imx: remove unneeded mach/irqs.h inclusion
  ARM: imx: add a legacy irqdomain for mx31ads
  ARM: imx: add a legacy irqdomain for 3ds_debugboard
  ARM: imx: pass gpio than irq number into mxc_expio_init
  ARM: imx: leave irq_base of wm8350_platform_data uninitialized
  dma: ipu: remove the use of ipu_platform_data
  ARM: imx: move irq_domain_add_legacy call into avic driver
  ARM: imx: move irq_domain_add_legacy call into tzic driver
  gpio/mxc: move irq_domain_add_legacy call into gpio driver
  ARM: imx: eliminate macro IRQ_GPIOx()
  ARM: imx: eliminate macro IOMUX_TO_IRQ()
  ARM: imx: eliminate macro IMX_GPIO_TO_IRQ()
2012-07-23 17:36:02 -07:00
Roland Stigge 4fbb0022cb gpio: of_get_named_gpio_flags() return -EPROBE_DEFER if GPIO not yet available
of_get_named_gpio_flags() and of_get_named_gpio() return -EPROBE_DEFER if the
respective GPIO is not (yet) available. This is useful if driver's probe()
functions try to get a GPIO whose controller isn't probed yet. Thus, the driver
can be probed again later on.

The function still returns -EINVAL on other errors (parse error or node doesn't
exist). This way, the case of an optional/intentionally missing GPIO is handled
appropriately.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:21 +02:00
Mark Brown e935457630 gpiolib: Defer failed gpio requests by default
Since users must be explicitly provided with a GPIO number in order to
request one the overwhelmingly common case for failing to request will
be that the required GPIO driver has not yet registered and we should
therefore defer until it has registered.

In order to avoid having to code this logic in individual drivers have
gpio_request() return -EPROBE_DEFER when failing to look up the GPIO.
Drivers which don't want this behaviour can override it if they desire.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:20 +02:00
Leed Aguilar ca3ffe910f gpio/pca953x: increase variables size to support 24 bit of data
Increase variable size from u16 to u32 to allocate 24 bit of data required for
the TCA6424 I/O expander device type.

Signed-off-by: Leed Aguilar <leed.aguilar@ti.com>
Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:18 +02:00
Chandrabhanu Mahapatra 6a7b36aa4b GPIO: PCA953X: Increase size of invert variable to support 24 bit
TCA6424 is a low voltage 24 bit I2C and SMBus I/O expander of pca953x family
similar to its 16 bit predecessor TCA6416. It comes with three 8-bit active
Input, Output, Polarity Inversion and Configuration registers each. The polarity
of Input ports can be reversed by setting the appropiate bit in Polarity
Inversion registers.

The variables corresponding to Input, Output and Configuration registers have
already been updated to support 24 bit values. This patch thus updates the
invert variable of PCA953X platform data to support 24 bit.

Signed-off-by: Chandrabhanu Mahapatra <cmahapatra@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:18 +02:00
Tarun Kanti DebBarma 346720130a gpio/omap: move bank->dbck initialization to omap_gpio_mod_init()
Since the bank->dbck initialization in a one time operation there
is no need to keep this within gpio_debounce(). Therefore, moving
clk_get(bank->dbck) to omap_gpio_mod_init(). Since the value of
bank->dbck would be NULL at the beginning, this check has been
removed.

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Reported-by: Paul Walmsley <paul@pwsan.com>
Reviewed-by: Jon Hunter <jon-hunter@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Cousson, Benoit <b-cousson@ti.com>
Reviewed-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:17 +02:00
Benoît Thébaudeau aeb27748e3 gpio/mxc: use the edge_sel feature if available
Some mxc processors have an edge_sel feature, which allows the IRQ to be
triggered by any edge.

This patch makes use of this feature if available, which skips mxc_flip_edge().

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
Cc: <linux-arm-kernel@lists.infradead.org>
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:16 +02:00
Alexandre Courbot 41920d1636 gpio: propagate of_parse_phandle_with_args errors
Make of_get_named_gpio_flags propagate any error it receives from
of_parse_phandle_with_args instead of inconditionally returning -EINVAL.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:15 +02:00
Olof Johansson f447ed8b31 gpio: samsung: add flags specifier to device-tree binding
This adds a flags field to the gpio specifier for Samsung. I didn't
want to add yet another field in the already quite long specifier, so
I decided to compress it together with the Pull Up/Down settings instead.

This is needed to, for example, have a gpio-keys input that is active low.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 21:00:15 +02:00
Mark Brown 31ba56f274 gpiolib: Add support for Wolfson Microelectronics Arizona class devices
The Arizona class devices provide some GPIOs for use in the system. This
driver provides support for these via gpiolib. Currently interrupts are
not supported, normally the GPIOs are outputs only.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
[Fold in WM5110 support patch]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-17 20:59:53 +02:00
Roland Stigge 0bdfeddc49 gpio: gpio-lpc32xx: Add gpio_to_irq mapping
This patch helps mapping with gpio_to_irq for the GPIOs that are irq enabled.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Tested-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:17 +02:00
Kuninori Morimoto 0c65ddd460 gpio: pcf857x: share 8/16 bit access functions
This patch adds 8/16 bit write/read functions,
and shared gpio input/output/set/get functions.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:17 +02:00
Roland Stigge da03d7400a gpio: LPC32xx: Driver cleanup
Since LPC32xx is now switched over to devicetree based GPIO, the unused
lpc32xx_gpio_init() can be removed.

Further, the driver title changed since it referred to the wrong file.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:16 +02:00
Mark Brown f8d203c049 gpiolib: wm8994: Convert to devm_kzalloc()
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:14 +02:00
Mark Brown 224a1f9045 gpiolib: wm8994: Use irq_domain mappings for gpios
This has no practical impact at present since we don't support device tree
so any user must have set an irq_base but this will in future allow a
transition to device tree with minimal invasiveness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:13 +02:00
Dmitry Eremin-Solenikov f942a7de04 gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips
Add a driver to use GPIO pins available on several AMD south bridges
(currently only AMD 8111 is supported).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-12 13:40:13 +02:00
Jerry Snitselaar bb39b6551e gpio/gpio-tps65910: gpio_chip.of_node referenced without CONFIG_OF_GPIO defined
commit 626f9914 added code to initialize gpio_chip.of_node, but if
CONFIG_OF_GPIO is not defined gps-tps65910 fails to build with an
error complaining gpio_chip has no member of_node. I ran into this
while doing a allyesconfig build on linux-next.

Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-10 22:53:31 +02:00
Linus Walleij 46bada6096 Merge branch 'kevin' into fixes 2012-07-09 20:02:28 +02:00
Linus Walleij 5e67cc4041 Merge branch 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6 into grant
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 16:58:54 +02:00
Laxman Dewangan 626f9914a3 gpio: tps65910: initialize of_node of gpio_chip
Initialize the gpio chip's of_node to the device's node
to work with DT based system.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 15:44:22 +02:00
Uwe Kleine-König 33a4e985ba gpio/mxc: make irqs work for fsl,imx21-gpio devices
The chained handler was set for the platform device with id == 0.
When the gpio devices are instantiated by a device tree, all have id ==
-1 and so the handler was unset resulting in unusable gpio irqs on
i.MX21 and i.MX27 (when using oftree).

Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 15:40:35 +02:00
Stephen Warren 3996bfc787 gpio: export devm_gpio_request_one
Without this, modules can't use this API, leading to build failures.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 14:49:13 +02:00
Mark Brown 8cd578b6e2 gpiolib: wm8994: Pay attention to the value set when enabling as output
Not paying attention to the value being set is a bad thing because it
means that we'll not set the hardware up to reflect what was requested.
Not setting the hardware up to reflect what was requested means that the
caller won't get the results they wanted.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 14:49:10 +02:00
Christian Dietrich afcc0f8c17 gpio/msm_v1: CONFIG_GPIO_MSM_V1 is only available on three SoCs
The feature GPIO_MSM_V1 is only available on three SoCs. On all other MSM SoCs
the INT_GPIO_GROUP{1,2} is undeclared, but Kconfig does allow such
configurations. Therefore the produced configuration is valid, but does not
compile. The problem is fixed by adding the missing Kconfig constraints.

drivers/gpio/gpio-msm-v1.c: In function ‘msm_init_gpio’:
drivers/gpio/gpio-msm-v1.c:629:26: error: 'INT_GPIO_GROUP1' undeclared
drivers/gpio/gpio-msm-v1.c:630:26: error: 'INT_GPIO_GROUP2' undeclared

Signed-off-by: Christian Dietrich <christian.dietrich@informatik.uni-erlangen.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 14:48:59 +02:00
Alessandro Rubini 2e2070c85a gpio-sta2x11: don't use pdata if null
If there is no platform data available, the driver shouldn't use the
pointer or it will oops.  Since things will mostly work nonetheless,
(the BIOS may have set up the pins properly), I'd better not fail the
probe even in this case.

Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-07-05 14:48:49 +02:00
Jon Hunter 7b86cef34a gpio/omap: fix invalid context restore of gpio bank-0
Currently the gpio _runtime_resume/suspend functions are calling the
get_context_loss_count() platform function if the function is populated for
a gpio bank. This function is used to determine if the gpio bank logic state
needs to be restored due to a power transition. This function will be populated
for all banks, but it should only be called for banks that have the
"loses_context" variable set. It is pointless to call this if loses_context is
false as we know the context will never be lost and will not need restoring.

For all OMAP2+ devices gpio bank-0 is in an always-on power domain and so will
never lose context. We found that the get_context_loss_count() was being called
for bank-0 during the probe and returning 1 instead of 0 indicating that the
context had been lost. This was causing the context restore function to be
called at probe time for this bank and because the context had never been saved,
was restoring an invalid state. This ultimately resulted in a crash [1].

This issue is a regression that was exposed by commit 1b1287032 (gpio/omap: fix
missing check in *_runtime_suspend()).

There are multiple bugs here that need to be addressed ...

1. Why the always-on power domain returns a context loss count of 1? This needs
   to be fixed in the power domain code [2]. However, the gpio driver should not
   assume the loss count is 0 to begin with.
2. The omap gpio driver should never be calling get_context_loss_count for a
   gpio bank in a always-on domain. This is pointless and adds unneccessary
   overhead.
3. The OMAP gpio driver assumes that the initial power domain context loss count
   will be 0 at the time the gpio driver is probed. However, it could be
   possible that this is not the case and an invalid context restore could be
   performed during the probe. To avoid this only populate the
   get_context_loss_count() function pointer after the initial call to
   pm_runtime_get() has occurred. This will ensure that the first
   pm_runtime_put() initialised the loss count correctly.

This patch addresses issues 2 and 3 above.

[1] http://marc.info/?l=linux-omap&m=134065775323775&w=2
[2] http://marc.info/?l=linux-omap&m=134100413303810&w=2

Cc: Kevin Hilman <khilman@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Cc: Franky Lin <frankyl@broadcom.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: NeilBrown <neilb@suse.de>

Reported-by: Franky Lin <frankyl@broadcom.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Franky Lin <frankyl@broadcom.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Tested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-07-03 09:41:39 -07:00
Shawn Guo 1ab7ef158d gpio/mxc: move irq_domain_add_legacy call into gpio driver
Move irq_domain_add_legacy call from imx*-dt.c into gpio driver and
have the gpio driver adopt irqdomain support for both DT and non-DT
boot.

With all imx platform code converted from static gpio irq number
computation to use run-time gpio_to_irq call, we can now use
irq_alloc_descs and irqdomain support to dynamically get irq_base
and have the mapping between gpio and irq number available without
using virtual_irq_start and MXC_GPIO_IRQ_START.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
2012-07-01 21:57:22 +08:00
Grazvydas Ignotas 9e303f228c gpio/omap: fix irq loss while in idle with debounce on
It seems that currently GPIO module is not working correctly during idle
when debounce is enabled - the system almost never responds to button
presses (observed on OMAP3530 ES2.1 and OMAP3630 ES1.2 pandora boards).
Even though wakeups are probably working, it seems that the GPIO module
itself is unable to detect input events and generate interrupts.
OMAP35x TRM also states that:
  "If the debounce clock is inactive, the debounce cell gates all
   input signals and thus cannot be used."

So whenever we are disabling debounce clocks (for PM or other reasons),
be sure the module's debounce feature is disabled too.

Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-06-26 19:08:49 -07:00
Kukjin Kim 5041caa4d5 gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx'
Should be 'exynos5_xxx' instead of 'exonys5_xxx'.

It happened at the commit 30b842889e ("Merge tag 'soc2' of
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc")
during v3.5 merge window.

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[ My bad  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03 21:21:01 -07:00
Linus Torvalds 7e5b2db77b Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "The whole series has been sitting in -next for quite a while with no
  complaints.  The last change to the series was before the weekend the
  removal of an SPI patch which Grant - even though previously acked by
  himself - appeared to raise objections.  So I removed it until the
  situation is clarified.  Other than that all the patches have the acks
  from their respective maintainers, all MIPS and x86 defconfigs are
  building fine and I'm not aware of any problems introduced by this
  series.

  Among the key features for this patch series is a sizable patchset for
  Lantiq which among other things introduces support for Lantiq's
  flagship product, the FALCON SOC.  It also means that the opensource
  developers behind this patchset have overtaken Lantiq's competing
  inhouse development team that was working behind closed doors.

  Less noteworthy the ath79 patchset which adds support for a few more
  chip variants, cleanups and fixes.  Finally the usual dose of tweaking
  of generic code."

Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where
printk spelling fixes clashed with file move and eventual removal of the
printk.

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits)
  MIPS: lantiq: remove orphaned code
  MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.
  MIPS: lantiq: implement support for FALCON soc
  MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc
  MTD: MIPS: lantiq: implement OF support
  watchdog: MIPS: lantiq: implement OF support and minor fixes
  SERIAL: MIPS: lantiq: implement OF support
  GPIO: MIPS: lantiq: convert gpio-stp-xway to OF
  GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio
  GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder
  MIPS: pci: convert lantiq driver to OF
  MIPS: lantiq: convert dma to platform driver
  MIPS: lantiq: implement support for clkdev api
  MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()
  OF: MIPS: lantiq: implement irq_domain support
  OF: MIPS: lantiq: implement OF support
  MIPS: lantiq: drop mips_machine support
  OF: PCI: const usage needed by MIPS
  MIPS: Cavium: Remove smp_reserve_lock.
  MIPS: Move cache setup to setup_arch().
  ...
2012-05-29 18:27:19 -07:00
Linus Torvalds 4b78147468 MFD changes for 3.5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw2QKAAoJEIqAPN1PVmxKfv8P/2L5d38tc3+9wYuGI1l+k7Mz
 xQt2PdAx/kHQGTjLE1DSoeOD6dn4aodFbPaTcsLsU9Eo4IiJnT68b8adr/bqYHKU
 Cod6NSPJMaBxLBJZxXsA7nY69Z6O5SMjXxEQsiDc24gaP0jjwaeY35KJSfMug8nF
 DA6rvEpchkF8QXzBmkO2t2/uPYr1YWqDZQkauLDnLRG01JnGXFz5ajv9N5pYhiFt
 QyYtheg8yEnfwnQ6AlmRtGK75jZRVmrj0kOzRjE9UL7ZwtzswWJes+RE3tlgk89m
 JQ7KASRmmqLpvcVJ9fG9SlGX//yBO6OEp5Km06RTxgmt0XftBDVqBTjk1EG2tfMR
 SR0NIz6gJ0twKAe6U0d+5HMYalOU45H5ha9e3vCqZ8vl9JfmM95RS+TmWbGcRIqj
 04Y5x3I4zq6e9D0u+211BeuRfzkQiefwWJmdPpn0oac3u5LeYbRj/aQ85fqwJWzG
 f99D9VU5xgfFHPAtL3SLFiwgd9yOiMBar6eeIva+okDyOW3KaEUzs8Y4dgDyvYcg
 IU//JGK51vLVmI5kXtGCwYkgRLF/Y7WKZ8TwypT+SY6iv6tPQVvApOZljq7RC9GI
 mXx2z2slA90jlg3TlEFZfxr1WqbZ3TCbonU1riLeMEtkiXUpLtmKC8gbhOqfGvvn
 Nzgt+YqRJXafZdELb/S+
 =Rh0r
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

Pull MFD changes from Samuel Ortiz:
 "Besides the usual cleanups, this one brings:

   * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton,
     ST-E's STAX211, Samsung's MAX77693 and TI's LM3533.

   * Device tree support for the twl6040, tps65910, da9502 and ab8500
     drivers.

   * Fairly big tps56910, ab8500 and db8500 updates.

   * i2c support for mc13xxx.

   * Our regular update for the wm8xxx driver from Mark."

Fix up various conflicts with other trees, largely due to ab5500 removal
etc.

* tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits)
  mfd: Fix build break of max77693 by adding REGMAP_I2C option
  mfd: Fix twl6040 build failure
  mfd: Fix max77693 build failure
  mfd: ab8500-core should depend on MFD_DB8500_PRCMU
  gpio: tps65910: dt: process gpio specific device node info
  mfd: Remove the parsing of dt info for tps65910 gpio
  mfd: Save device node parsed platform data for tps65910 sub devices
  mfd: Add r_select to lm3533 platform data
  gpio: Add Intel Centerton support to gpio-sch
  mfd: Emulate active low IRQs as well as active high IRQs for wm831x
  mfd: Mark two lm3533 zone registers as volatile
  mfd: Fix return type of lm533 attribute is_visible
  mfd: Enable Device Tree support in the ab8500-pwm driver
  mfd: Enable Device Tree support in the ab8500-sysctrl driver
  mfd: Add support for Device Tree to twl6040
  mfd: Register the twl6040 child for the ASoC codec unconditionally
  mfd: Allocate twl6040 IRQ numbers dynamically
  mfd: twl6040 code cleanup in interrupt initialization part
  mfd: Enable ab8500-gpadc driver for Device Tree
  mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver
  ...
2012-05-29 11:53:11 -07:00
Linus Torvalds 30b842889e arm-soc: soc specific changes, part 2
This adds support for the spear13xx platform, which has first been under
 review a long time ago and finally been completed after generic spear
 work has gone into the clock, dt and pinctrl branches.
 
 Also a number of updates for the samsung socs are part of this branch.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuezDAAoJEIwa5zzehBx3mooP/iTHd1wRjr2MzKNx4+LpLWgl
 aAXH002xe9Lvu7m75BRvEYWWdRLkyEy9ARM4s2wJCnxU41KmbF65ED1erxK8xaSe
 Ako34vzH+HiUCM2DLzIP6FXyJMM7OcfrdGaY/GxOv+U+MzGUHeu3Q+8b0B/yfBnm
 M3HdDrpyZHKZP9UM3wVQ4/ilDck6vEjYSV2jC11IaHiDMRD2nSpfRKh8H3+gv65S
 gtj9EZpWM8CZg/fCe5lsm3PZnBnqHHW3WVafVnDQfGWeJYqZxMB5QKLU6qf/ntpx
 LU2WjXoGaMmGBVZWynrwNEY6GVp3fZrDV30/q8Htf0/fBpEjUncrLHXtw0DxkpnK
 UuyoRgn7zxOc3kDzohFNIexp1K3q+PNzXklR9hg7OSVji+9bPd2LIOEnpBeghBGj
 WzZIebz5dIdddHlnOl4fRdmxZva2UTuI4bFAJ0izi10Mup7A9lrENnFHG/iVA0rQ
 QlqJZoyeDCvbXQqZCgHirYRPhIxXdQj4G5IivfRxQ7Jgjy76Kt9uDp1egwezF/3a
 2jVtcK42XokVv3Dhsvq9UNFn9GWdVImZ7eh70XLv+q834zAVxSzjWLtlS8I1Q5WO
 7BGIJaICtugNwgYr44Dif6nsoVUmMnSwU5hVw1pApKZspN6EhMhMdp2hw8JPHFUs
 mrZdHi1NAWuYSbObc3UB
 =W2Ri
 -----END PGP SIGNATURE-----

Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc: soc specific changes (part 2) from Olof Johansson:
 "This adds support for the spear13xx platform, which has first been
  under review a long time ago and finally been completed after generic
  spear work has gone into the clock, dt and pinctrl branches.

  Also a number of updates for the samsung socs are part of this branch."

Fix up trivial conflicts in drivers/gpio/gpio-samsung.c that look much
worse than they are: the exonys5 init code was refactored in commit
fd454997d6 ("gpio: samsung: refactor gpiolib init for exynos4/5"), and
then commit f10590c983 ("ARM: EXYNOS: add GPC4 bank instance") added a
new gpio chip define and did tiny updates to the init code.

So the conflict diff looks like hell, but it's actually a fairly simple
change.

* tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: fix building with CONFIG_OF disabled
  ARM: EXYNOS: Add AUXDATA for i2c controllers
  ARM: dts: Update device tree source files for EXYNOS5250
  ARM: EXYNOS: Add device tree support for interrupt combiner
  ARM: EXYNOS: Add irq_domain support for interrupt combiner
  ARM: EXYNOS: Remove a new bus_type instance for EXYNOS5
  ARM: EXYNOS: update irqs for EXYNOS5250 SoC
  ARM: EXYNOS: Add pre-divider and fout mux clocks for bpll and mpll
  ARM: EXYNOS: add GPC4 bank instance
  ARM: EXYNOS: Redefine IRQ_MCT_L0,1 definition
  ARM: EXYNOS: Modify the GIC physical address for static io-mapping
  ARM: EXYNOS: Add watchdog timer clock instance
  pinctrl: SPEAr1310: Fix pin numbers for clcd_high_res
  SPEAr: Update MAINTAINERS and Documentation
  SPEAr13xx: Add defconfig
  SPEAr13xx: Add compilation support
  SPEAr13xx: Add dts and dtsi files
  pinctrl: Add SPEAr13xx pinctrl drivers
  pinctrl: SPEAr: Create macro for declaring GPIO PINS
  SPEAr13xx: Add common clock framework support
  ...
2012-05-26 13:05:55 -07:00
Linus Torvalds 84a442b9a1 arm-soc: device tree conversions, part 2
These continue the device tree work from part 1, this set is for the
 tegra, mxs and imx platforms, all of which have dependencies on clock
 or pinctrl changes submitted earlier.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuex7AAoJEIwa5zzehBx3xsQP/jkyt74MvuKUi8pi2zkeMIgn
 4XieyqcA0KZjJzfB22q3GIZjNIf/mEIGE4E/3bneVMPh/E2zaiohaXFExBmjNjml
 hhzWeZlFGPBjrZsfpIXJIIUhwSI7gX2rjYh4npJmdNhZmy8Y89XnpNJhN1kOwMuV
 oN23hPWoSVGbyDMQ0fmHx9GyOL8m7yap+joG13aljDa2OKpQg+pYvdwft+k1K9di
 8yPF+qA043UUR7dSsjmTbiCcjZy2eySdCmfOAkEG4inSgxNoM7GBs3MuwZo/veCD
 v5WssJqWDbLXtqKn5Uo2bvGWiEcf0xtwOAqhSpbaup3dQFJSWMEenBTtA9UlxFhk
 6gdY62O+7k6N0thkxXyLNGkgaGzexZAsK7dM6XSDB+PqD+OSNJS7dvmxZM8tuaRn
 rvCM1XWcNeN/dpnLbgwCR12efkwWtJoqqUZUUp/tFFaTo8HriqeAIYk7obnR8s9n
 S5x9LeueQGNgaxXJzVdh481YKG/1lqjG/a06HbVgYS4XQvtdA+4khalOefJv10tm
 Nkg8+4/8pMthWJfhhlfPUgWFXOXFF2AGPG4su2XwKuFXypO8599lzi7gUQaEZu2U
 7caqoWP69KsKvK5iAAmA4DQ2rcsgHd44NXx/8Jjes9ma8knlYjrf42dBH6AZMQBG
 69I9sJ1cyqusBwx72NPN
 =WeDQ
 -----END PGP SIGNATURE-----

Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc device tree conversions (part 2) from Olof Johansson:
 "These continue the device tree work from part 1, this set is for the
  tegra, mxs and imx platforms, all of which have dependencies on clock
  or pinctrl changes submitted earlier."

Fix up trivial conflicts due to nearby changes in
drivers/{gpio/gpio,i2c/busses/i2c}-mxs.c

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
  ARM: dt: tegra: invert status=disable vs status=okay
  ARM: dt: tegra: consistent basic property ordering
  ARM: dt: tegra: sort nodes based on bus order
  ARM: dt: tegra: remove duplicate device_type property
  ARM: dt: tegra: consistenly use lower-case for hex constants
  ARM: dt: tegra: format regs properties consistently
  ARM: dt: tegra: gpio comment cleanup
  ARM: dt: tegra: remove unnecessary unit addresses
  ARM: dt: tegra: whitespace cleanup
  ARM: dt: tegra cardhu: fix typo in SDHCI node name
  ARM: dt: tegra: cardhu: register core regulator tps62361
  ARM: dt: tegra30.dtsi: Add SMMU node
  ARM: dt: tegra20.dtsi: Add GART node
  ARM: dt: tegra30.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra20.dtsi: Add Memory Controller(MC) nodes
  ARM: dt: tegra: Add device tree support for AHB
  ARM: dts: enable audio support for imx28-evk
  ARM: dts: enable i2c device for imx28-evk
  i2c: mxs: add device tree probe support
  ARM: dts: enable mmc for imx28-evk
  ...
2012-05-26 12:57:47 -07:00