Commit Graph

812 Commits

Author SHA1 Message Date
Linus Torvalds dcf397f037 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (124 commits)
  sh: allow building for both r2d boards in same binary.
  sh: fix r2d board detection
  sh: Discard .exit.text/.exit.data at runtime.
  sh: Fix up some section alignments in linker script.
  sh: Fix SH-4 DMAC CHCR masking.
  sh: Rip out left-over nommu cond syscall cruft.
  sh: Make kgdb i-cache flushing less inept.
  sh: kgdb section mismatches and tidying.
  sh: cleanup struct irqaction initializers.
  sh: early_printk tidying.
  video: pvr2fb: Add TV (RGB) support to Dreamcast PVR driver.
  sh: Conditionalize gUSA support.
  sh: Follow gUSA preempt changes in __switch_to().
  sh: Tidy up gUSA preempt handling.
  sh: __copy_user() optimizations for small copies.
  sh: clkfwk: Support multi-level clock propagation.
  sh: Fix URAM start address on SH7785.
  sh: Use boot_cpu_data for CPU probe.
  sh: Support extended mode TLB on SH-X3.
  sh: Bump MAX_ACTIVE_REGIONS for SH7785.
  ...
2007-10-13 09:49:04 -07:00
Russell King b049bd9de4 [ARM] pxa: update pxa serial driver to use clk support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:15:07 +01:00
Russell King e259a3aecb [ARM] pxa: convert PXA serial drivers to use platform resources
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-12 21:14:49 +01:00
Linus Torvalds e86908614f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits)
  [POWERPC] Add memchr() to the bootwrapper
  [POWERPC] Implement logging of unhandled signals
  [POWERPC] Add legacy serial support for OPB with flattened device tree
  [POWERPC] Use 1TB segments
  [POWERPC] XilinxFB: Allow fixed framebuffer base address
  [POWERPC] XilinxFB: Add support for custom screen resolution
  [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters
  [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci
  [POWERPC] 4xx: Kilauea defconfig file
  [POWERPC] 4xx: Kilauea DTS
  [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x
  [POWERPC] 4xx: Add AMCC 405EX support to cputable.c
  [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable
  [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers
  [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig
  [POWERPC] 85xx: Killed <asm/mpc85xx.h>
  [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS
  [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding.
  [POWERPC] mpc8272ads: Remove muram from the CPM reg property.
  [POWERPC] Make clockevents work on PPC601 processors
  ...

Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
2007-10-11 21:55:47 -07:00
Scott Wood 15f8c604a7 [POWERPC] cpm: Describe multi-user ram in its own device node.
The way the current CPM binding describes available multi-user (a.k.a.
dual-ported) RAM doesn't work well when there are multiple free regions,
and it doesn't work at all if the region doesn't begin at the start of
the muram area (as the hardware needs to be programmed with offsets into
this area).  The latter situation can happen with SMC UARTs on CPM2, as its
parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't
support moving it.

It is now described with a muram node, similar to QE.  The current CPM
binding is sufficiently recent (i.e. never appeared in an official release)
that compatibility with existing device trees is not an issue.

The code supporting the new binding is shared between cpm1 and cpm2, rather
than remain separated.  QE should be able to use this code as well, once
minor fixes are made to its device trees.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-04 15:47:05 -05:00
Scott Wood d948a29ea7 [POWERPC] cpm_uart: Issue STOP_TX command before initializing console.
This prevents some bootloader/bootwrapper characters from being lost.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood c1dcfd9d19 [POWERPC] cpm_uart: sparse fixes
Mostly a bunch of direct access to in/out conversions, plus a few
cast removals, __iomem annotations, and miscellaneous cleanup.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Scott Wood 7ae870368d [POWERPC] cpm_uart: Be an of_platform device when CONFIG_PPC_CPM_NEW_BINDING is set.
The existing OF glue code was crufty and broken.  Rather than fix it,
it has been removed, and the serial driver now talks to the device tree
directly.

The non-CONFIG_PPC_CPM_NEW_BINDING code can go away once CPM platforms
are dropped from arch/ppc (which will hopefully be soon), and existing
arch/powerpc boards that I wasn't able to test on for this patchset get
converted (which should be even sooner).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03 20:36:35 -05:00
Grant Likely e077b50c29 [POWERPC] Uartlite: Revert register io access changes
Reverts commit a15da8eff3

This driver is used by devices other than the xilinx opb-uartlite which
depend on bytewise access to the registers.  The change to 32 bit access
does not work on these devices.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:37:41 -05:00
Grant Likely fb4e6e663b [POWERPC] Uartlite: Let the console be initialized earlier
By configuring it earlier we get console output sooner which is helpful
for debugging when the kernel crashes before the serial drivers are
initialized.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:16 -05:00
Grant Likely 852e1ea748 [POWERPC] Uartlite: Add of-platform-bus binding
Add of_platform bus binding so this driver can be used with arch/powerpc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely 435706b385 [POWERPC] Uartlite: Comment block tidy
Tidy the comments to split the driver into logical section; the main driver,
the console driver, the platform bus binding, and module initialization
and teardown.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely 8fa7b61006 [POWERPC] Uartlite: Separate the bus binding from the driver proper
Separate the bus binding code from the driver structure allocation code in
preparation for adding the of_platform_bus bindings needed by arch/powerpc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely 00775828e6 [POWERPC] Uartlite: Add macro for uartlite device name
Changed to make the following OF_platform bus binding patch a wee bit cleaner

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely 483c79db95 [POWERPC] Uartlite: change name of ports to ulite_ports
Changed to match naming convention used in the rest of the module

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:15 -05:00
Grant Likely a15da8eff3 [POWERPC] Uartlite: Fix reg io to access documented register size
The Uartlite data sheet defines the registers as 32 bit wide.  This
patch changes the register access to use 32 bit transfers and eliminates
the magic +3 offset which is currently required to make the device
work.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Williams <jwilliams@itee.uq.edu.au>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-03 07:23:14 -05:00
Paul Mackerras 70f227d884 Merge branch 'linux-2.6' into for-2.6.24 2007-10-03 15:33:17 +10:00
Jochen Friedrich d214602804 [POWERPC] Fix cpm_uart driver for cpm1 machines
in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp.
On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't
be used for arithmetric compare operations with virtual addresses
returned by cpm_dpram_addr. This patch changes the assignment to use
cpm_dpram_addr as well, like in cpm_uart_cpm2.h.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-28 10:26:30 -05:00
Thomas Bogendoerfer 744551cceb [SUNSAB]: Fix broken SYSRQ.
Include SYSRQ support for SUNSAB if SUNSAB_CONSOLE is selected

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-25 22:49:37 -07:00
David Woodhouse e4533b243e [POWERPC] Optionally use new device number for pmac_zilog
This adds the option for the pmac_zilog driver to use the major/minor
numbers recently allocated specifically for it (/dev/ttyPZn) instead
of the /dev/ttySn numbers.  The advantage of doing this is that it
allows the pmac_zilog and 8250 drivers to coexist.  The disadvantage
of doing this is that it is a user-visible ABI change and it will
break existing working setups on powermacs, and could be confusing to
users.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-22 14:49:21 +10:00
Paul Mundt 68362e0857 serial: sh-sci: kgdb console build fixes.
The kgdb console code requires uart_set_options() and friends, which
are only provided by the serial core when console support is enabled.
These were sitting under CONFIG_SH_KGDB and resulted in a link error
when console support wasn't enabled, work that by rolling the console
routines under CONFIG_SH_KGDB_CONSOLE, which they should have been
all along.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:53 +09:00
Markus Brunner 3ea6bc3de4 sh: Add SH7720 CPU support.
This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Paul Mundt e289fd972c serial: sh-sci: Tidy cpufreq printk.
This was a bit more verbose than it needed to be.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Paul Mundt 1760b7d760 serial: sh-sci: Shut up compiler warning for SH-X3 SCIF.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Paul Mackerras 0ce49a3945 Merge branch 'linux-2.6' 2007-09-20 10:09:27 +10:00
Olaf Hering aa0154290f [POWERPC] Fix pmac_zilog debug arg
drivers/serial/pmac_zilog.c:1590: warning: format '%d' expects type 'int', but argument 3 has type 'pm_message_t'

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-09-19 14:40:54 +10:00
Al Viro 9c5b34806c [SUNSAB]: Fix several bugs.
* don't register irq until ->startup() (and release in ->shutdown()).
That avoids oopsen with the current tree when interrupt comes before we'd
set up the data structures for ttyb.
	* handle console=ttyS... even when OBP talks to screen/keyboard
	* register irq handler for each port, let kernel/irq/handle.c
call it for both if needed.  Kills code duplication in sunsab_interrupt().
BTW, there'd been bitrot in it - ttya handling had stopped calling
check_status() on BRK (correctly), ttyb copy of that code had kept the
bogus call in that case.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 16:47:07 -07:00
John Rigby af6a9aabc1 [POWERPC] 52xx: Fix mpc52xx_uart_of_assign to use correct index
Use idx as index into mpc52xx_uart_nodes instead of i

Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14 08:54:05 -05:00
Adrian Bunk 7111de7643 fix SERIAL_CORE_CONSOLE driver dependencies
SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y.

Additionally, this patch fixes whitespace instead of tabs at the
SERIAL_MUX_CONSOLE option.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:27 -07:00
Thiemo Seufer 719b6f29fc BCM1480 serial build fix
Restores serial functionality for the BCM1480.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-11 17:21:19 -07:00
Ralf Baechle f79abb828e Fix modpost warning in serial driver
This is triggered if PCI && !HOTPLUG.

  MODPOST vmlinux.o
WARNING: vmlinux.o(.data+0xc910): Section mismatch: reference to .init.text:pci_ite887x_init (between 'pci_serial_quirks' and 'serial_pci_tbl')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-31 01:42:23 -07:00
David S. Miller 4f1296a516 [SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c
resource_size_t can be either a u64 or a u32, and we can't
really know for sure, so when printing such a value out
always use long-long printf formatting and cast the argument
to that type.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-26 18:49:11 -07:00
Olof Johansson aa79850562 serial: add pci ids for PA Semi PWRficient onchip uarts
Add PCI IDs for the onchip UARTs on PA Semi PWRficient.

Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:46 -07:00
Christian Schmidt 436bbd431d Add blacklisting capability to serial_pci to avoid misdetection of serial ports
The serial_pci driver tries to guess serial ports on unknown devices based
on the PCI class (modem or serial).  On certain softmodems (AC'97 modems)
this can lead to the recognition of non-existing serial ports.

This patch adds a blacklist of PCI IDs that are to be ignored by the driver.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Christian Schmidt <schmidt@digadd.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Corey Minyard ad4c2aa635 Serial 8250: handle saving the clear-on-read bits from the LSR and MSR
Reading the LSR clears the break, parity, frame error, and overrun bits in
the 8250 chip, but these are not being saved in all places that read the
LSR.  Same goes for the MSR delta bits.  Save the LSR bits off whenever the
lsr is read so they can be handled later in the receive routine.  Save the
MSR bits to be handled in the modem status routine.

Also, clear the stored bits and clear the interrupt registers before
enabling interrupts, to avoid handling old values of the stored bits in the
interrupt routines.

[akpm@linux-foundation.org: clean up pre-existing code]
Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Atsushi Nemoto 999999616e serial_txx9: Fix modem control line handling
This chip does not have modem control lines.  Return TIOCM_CAR and
TIOCM_DSR always on get_mctrl() and ajust some bits in termios cflag.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Niels de Vos 84f8c6fc0e serial: add support for ITE 887x chips
Add support for the it887x-chips (PCI) manufactured by ITE.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
David Woodhouse 20620d688a serial: don't optimise away baud rate changes when BOTHER is used
The uart_set_termios() function will bail out early without bothering to
touch the hardware, if it decides that nothing "relevant" has changed.
Unfortunately, its idea of "relevant" doesn't include c_[io]speed.  So if
the baud rate bits are BOTHER and you just change the speed, the change
gets optimised away.

This patch makes it ignore the old Bfoo bits in c_cflag and just check
whether c_ispeed and c_ospeed have changed.  Those integers are always set
appropriately for us by set_termios().

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-22 19:52:44 -07:00
Mike Frysinger bbf275f092 Blackfin serial driver: pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230
pending a unique anomaly id, tie the break flood issue to ANOMALY_05000230
as when that was fixed, the fallout also fixed the break flood

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-08-05 16:48:08 +08:00
Sonic Zhang a359cca71e Blackfin arch: update kgdb patch
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-10 16:47:58 +08:00
Robin Getz 0ae53640b5 Blackfin arch: Initial patch to add earlyprintk support
This allows debugging of problems which happen eary in the kernel
boot process (after bootargs are parsed, but before serial subsystem
is fully initialized)

Signed-off-by: Robin Getz <robin.getz@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-10-09 17:24:49 +08:00
Daniel Ritz b6b1d87785 serial: fix 8250 early console setup
the early setup function serial8250_console_early_setup() can be called
from non __init code (eg. hotpluggable serial ports like serial_cs) so
remove the __init from the call chain to avoid crashes.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-03 15:02:56 -07:00
Maciej W. Rozycki 86d0004abc sb1250-duart: __maybe_unused, etc. fixes
This is a set of small fixes addressing points raised with the original
driver submission.  In particular, __maybe_unused is used rather than a
local hack and sbd_ops is made const.  Additionally I have made two local
string variables automatic as rodata space was wasted for pointers
unnecessarily.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:43 -07:00
Mark A. Greer 2e89db75ae serial: MPSC: Fix coding style and whitespace issues
Fix up mpsc.c to be aligned with Documentation/CodingStyle.  Also fix up some
whitespace issues.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Mark A. Greer 79f851733c serial: MPSC: Remove duplicate SUPPORT_SYSRQ definition
Remove the duplicate definition of SUPPORT_SYSRQ in mpsc driver.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Stephane Chazelas 5797ae364c serial: MPSC: Stop rx engine when CREAD cleared
Currently, the MPSC driver doesn't stop recieving characters when the CREAD
flag in termios->c_cflag is cleared.  It should.  Also, only start receiving
if its not already started.

Signed-off-by: Stephane Chazelas <stephane@artesyncp.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Carlos Sanchez 6c1ead5e77 serial: MPSC: Remove race between Rx stop & restart
The patch in commit ID f7232056bf stops (aborts)
the MPSC's receive engine just before restarting it.  Unfortunately, it
doesn't wait for the abort to complete before restarting it which creates a
race between the abort and the restart.  If the restart occurs first, the
in-progress abort stops it again and the rx engine remains stopped.

Instead, do the abort when the SDMA engine is being stopped.  Make sure to
wait for the abort to complete before continuing.

Signed-off-by: Carlos Sanchez <carlos.sanchez@gecoinc.com>
Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa 2174041d66 serial: fix vr41xx_siu serial console support
The serial console can select only SERIAL_VR41XX=y.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa a95d32094c serial: fix vr41xx_siu interface select
only PORT_VR41XX_SIU can select interface.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa a24ac9fba1 serial: fix section mismatch vr41xx_siu
Fix section mismatch vr41xx_siu.

WARNING: drivers/built-in.o(.text+0x2ce4c): Section mismatch: reference to .init.text:uart_parse_options (between 'siu_console_setup' and 'siu_request_port')
WARNING: drivers/built-in.o(.text+0x2ce70): Section mismatch: reference to .init.text:uart_set_options (between 'siu_console_setup' and 'siu_request_port')

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:41 -07:00
Yoichi Yuasa 5b232ecfd9 DDB5477: remove driver bits of support
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Andrew Morton 57d4810ea0 revert "x86, serial: convert legacy COM ports to platform devices"
Revert 7e92b4fc34.  It broke Sébastien Dugué's
machine and Jeff said (persuasively)

  This seems like it will break decades-long-working stuff, in favor of
  breaking new ground in our favorite area, "trusting the BIOS."

  It's just not worth it for serial ports, IMO.  Serial ports are something
  that just shouldn't break at this late stage in the game.  My new Intel
  platform boxes don't even have serial ports, so I question the value of
  messing with serial port probing even more...  because...  just wait a year,
  and your box won't have a serial port either!  :)

  I certainly don't object to the use of platform devices (or isa_driver),
  but the probe change seems questionable.  That's sorta analagous to
  rewriting the floppy driver probe routine.  Sure you could do it...  but why
  risk all that damage and go through debugging all over again?

  It seems clear from this report that we cannot, should not, trust BIOS for
  something (a) so simple and (b) that has been working for over a decade.

Much discussion ensued and we've decided to have another go at all of this.

Cc: Sébastien Dugué <sebastien.dugue@bull.net>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Sascha Sommer <saschasommer@freenet.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:38 -07:00
Atsushi Nemoto ddb437b7f7 serial_txx9: fix printk format mismatch
Since the commit 4f640efb31, "%lx" is not
suitable for p->mapbase (resource_size_t) in 32-bit.  This patch fixes a
compiler warning caused by the mismatch.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-31 15:39:37 -07:00
Linus Torvalds 6a302358d8 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: Fix fs.h removal from mm.h regressions.
  sh: fix get_wchan() for SH kernels without framepointers
  sh: arch/sh/boot - fix shell usage
  rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
  sh: remove support for sh7300 and solution engine 7300
  sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
  sh: Kill off virt_to_bus()/bus_to_virt().
  sh: sh-sci - fix SH7708 support
  sh: Restrict DSP support to specific CPUs.
  sh: Silence sq compile warning on sh4 nommu.
  sh: Kill the rest of the SE73180 cruft.
  sh: remove support for sh73180 and solution engine 73180
  sh: remove old broken pint code
  sh: Reclaim beginning of P3 space for vmalloc area.
  sh: Fix Dreamcast DMA issues.
  sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.
2007-07-30 21:54:37 -07:00
Magnus Damm d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Magnus Damm 0fbde9509d sh: sh-sci - fix SH7708 support
This patch makes sure the sci serial port driver compiles for sh7708.
The approach taken is to treat the sh7708 as a subset of sh7706, sh7707,
sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only
equipped with a single sci port. The platform data in setup-sh770x.c
already limits the number of serial ports for sh7708 to a single one,
so the non-existing scif ports pointed out in sh-sci.h will remain
unused in case of sh7708.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:35:54 +09:00
Greg Ungerer 931f9cde5c m68knommu: fix workqueues in 68328 serial driver
Fix workqueues in 68328 serial driver.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 11:05:01 -07:00
Greg Ungerer a427138712 m68knommu: remove legacy power managament from 68328 serial driver
Remove the legacy power management code from the 68328 serial driver.
It is not used, and there is no current kernel support for power
management on the 68328.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-25 11:05:01 -07:00
Magnus Damm 870e8a2438 sh: remove support for sh73180 and solution engine 73180
This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:49:21 +09:00
Josh Boyer 4f640efb31 Use resource_size_t for serial port IO addresses
At present, various parts of the serial code use unsigned long to define
resource addresses.  This is a problem, because some 32-bit platforms have
physical addresses larger than 32-bits, and have mmio serial uarts located
above the 4GB point.

This patch changes the type of mapbase in both struct uart_port and struct
plat_serial8250_port to resource_size_t, which can be configured to be 64
bits on such platforms.  The mapbase in serial_struct can't safely be
changed, because that structure is user visible.

Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-24 12:24:58 -07:00
Mike Frysinger d5148ffa60 Blackfin arch: use the [CS]SYNC() macros which include anomaly workarounds rather than __builtin_bfin_[cs]sync()
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-25 11:57:42 +08:00
Attila Kinali 9d9b7ad717 Add manufacturer and card id of teltonica pcmcia modems
Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c

Signed-off-by: Attila Kinali <attila@kinali.ch>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-07 16:28:43 -07:00
Linus Torvalds 7578634990 Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits)
  [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410
  [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers
  [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h
  [ARM] 4521/2: S3C: Reorganise VA mapping headers
  [ARM] 4520/1: S3C: Remove old VA values from static map
  [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h
  [ARM] 4518/1: S3C: Rename watchdog configuration options
  [ARM] 4517/1: S3C: Fix debug macros for ARM926 output
  [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926
  [ARM] 4515/1: S3C: Move uncompress code to plat-s3c
  [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
  [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
  [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates
  [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
  [ARM] 4510/1: S3C: split debug-macro support into plat-s3c
  [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
  [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
  [ARM] 4461/1: MXC platform and i.MX31ADS core support
  [ARM] 4507/1: pxa2xx clock_event_device
  [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later
  ...
2007-07-22 11:22:59 -07:00
Russell King 5957a4eb28 Merge branches 'at91', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'ns9xxx', 'pxa' and 's3c' into devel 2007-07-22 17:09:17 +01:00
Ben Dooks 531b617c71 [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
This patch moves items of the s3c24xx support into
a new plat-s3c directory for items that use the
s3c24xx support but are not directly s3c24xx
compatible, such as the s3c2400 and s3c6400.

git mv commands:
git mv include/asm-arm/arch-s3c2410/iic.h include/asm-arm/plat-s3c/iic.h
git mv include/asm-arm/arch-s3c2410/nand.h include/asm-arm/plat-s3c/nand.h
git mv include/asm-arm/arch-s3c2410/regs-iic.h include/asm-arm/plat-s3c/regs-iic.h
git mv include/asm-arm/arch-s3c2410/regs-nand.h include/asm-arm/plat-s3c/regs-nand.h
git mv include/asm-arm/arch-s3c2410/regs-rtc.h include/asm-arm/plat-s3c/regs-rtc.h
git mv include/asm-arm/arch-s3c2410/regs-serial.h include/asm-arm/plat-s3c/regs-serial.h
git mv include/asm-arm/arch-s3c2410/regs-timer.h include/asm-arm/plat-s3c/regs-timer.h
git mv include/asm-arm/arch-s3c2410/regs-watchdog.h include/asm-arm/plat-s3c/regs-watchdog.h

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 16:44:24 +01:00
David S. Miller c73fcc846c [SPARC]: Fix serial console device detection.
The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-20 16:59:26 -07:00
Sascha Hauer 4b300c362d [ARM] 4481/1: Fix a bug when i.MX is compiled as a module
Fix the unregistration order in the i.MX serial driver

Signed-off-by: Sreekrishnan Venkateswaran <krishhna@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 09:55:14 +01:00
Yoann Padioleau dd00cc486a some kmalloc/memset ->kzalloc (tree wide)
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).

Here is a short excerpt of the semantic patch performing
this transformation:

@@
type T2;
expression x;
identifier f,fld;
expression E;
expression E1,E2;
expression e1,e2,e3,y;
statement S;
@@

 x =
- kmalloc
+ kzalloc
  (E1,E2)
  ...  when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\)
- memset((T2)x,0,E1);

@@
expression E1,E2,E3;
@@

- kzalloc(E1 * E2,E3)
+ kcalloc(E1,E2,E3)

[akpm@linux-foundation.org: get kcalloc args the right way around]
Signed-off-by: Yoann Padioleau <padator@wanadoo.fr>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Bryan Wu <bryan.wu@analog.com>
Acked-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Acked-by: Roland Dreier <rolandd@cisco.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Greg KH <greg@kroah.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:50 -07:00
Maciej W. Rozycki 8b4a40809e zs: move to the serial subsystem
This is a reimplementation of the zs driver for the serial subsystem.  Any
resemblance to the old driver is purely coincidential.  ;-) I do hope I got
the handling of modem lines right -- better do not tackle me about the
issue unless you feel too good...

Any users of the old driver: please note the numbers of the serial lines
have now been swapped, i.e.  ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3.  It has
to do with the modem lines mentioned above; basically the port A in a given
chip has to be initialised before the port B if you want to use the latter
as the serial console (which is usually the case), as operations on modem
lines of the serial line associated with the port B access both ports (see
the comment at the top of the driver for the details of wiring used).
Please update your scripts.

This is also the reason each SCC now requests an IRQ once only (as seen in
"/proc/interrupts") -- the handler takes care of both ports at once as the
line associated with the port B has to take status update interrupts from
both ports (and yet the line of the port A takes its own for itself too).
The old driver never got it right...

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18 08:38:22 -07:00
Yinghai Lu b187f180cc serial: add early_serial_setup() back to header file
early_serial_setup was removed from serial.h, but forgot to put in
serial_8250.h

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-18 08:38:22 -07:00
Maciej W. Rozycki b45d527974 sb1250-duart.c: SB1250 DUART serial support
This is a driver for the SB1250 DUART, a dual serial port implementation
included in the Broadcom family of SOCs descending from the SiByte SB1250
MIPS64 chip multiprocessor.  It is a new implementation replacing the
old-fashioned driver currently present in the linux-mips.org tree.  It
supports all the usual features one would expect from a(n asynchronous)
serial driver, including modem line control (as far as hardware supports it
-- there is edge detection logic missing from the DCD and RI lines and the
driver does not implement polling of these lines at the moment), the serial
console, BREAK transmission and reception, including the magic SysRq.  The
receive FIFO threshold is not maintained though.

The driver was tested with a SWARM board which uses a BCM1250 SOC (which is
dual MIPS64 CMP) and has both ports of the single DUART implemented wired
externally.  Both were tested.  Testing included using the ports as
terminal lines at 1200bps (which is the ports minimum), 115200bps and a
couple of random speeds inbetween.  The modem lines were verified to
operate correctly.  No testing was performed with a use as a network
interface, like with SLIP or PPP.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:03 -07:00
Linus Torvalds 489de30259 Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (209 commits)
  [POWERPC] Create add_rtc() function to enable the RTC CMOS driver
  [POWERPC] Add H_ILLAN_ATTRIBUTES hcall number
  [POWERPC] xilinxfb: Parameterize xilinxfb platform device registration
  [POWERPC] Oprofile support for Power 5++
  [POWERPC] Enable arbitary speed tty ioctls and split input/output speed
  [POWERPC] Make drivers/char/hvc_console.c:khvcd() static
  [POWERPC] Remove dead code for preventing pread() and pwrite() calls
  [POWERPC] Remove unnecessary #undef printk from prom.c
  [POWERPC] Fix typo in Ebony default DTS
  [POWERPC] Check for NULL ppc_md.init_IRQ() before calling
  [POWERPC] Remove extra return statement
  [POWERPC] pasemi: Don't auto-select CONFIG_EMBEDDED
  [POWERPC] pasemi: Rename platform
  [POWERPC] arch/powerpc/kernel/sysfs.c: Move NUMA exports
  [POWERPC] Add __read_mostly support for powerpc
  [POWERPC] Modify sched_clock() to make CONFIG_PRINTK_TIME more sane
  [POWERPC] Create a dummy zImage if no valid platform has been selected
  [POWERPC] PS3: Bootwrapper support.
  [POWERPC] powermac i2c: Use mutex
  [POWERPC] Schedule removal of arch/ppc
  ...

Fixed up conflicts manually in:

	Documentation/feature-removal-schedule.txt
	arch/powerpc/kernel/pci_32.c
	arch/powerpc/kernel/pci_64.c
	include/asm-powerpc/pci.h

and asked the powerpc people to double-check the result..
2007-07-16 17:58:08 -07:00
David S. Miller f798634d80 [SERIAL] SUNHV: Fix jerky console on LDOM guests.
Mixing putchar() and write() hvcalls does not work %100
correctly.  But we should be using write() all the time
if we can, even from ->start_tx(), anyways.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 17:12:00 -07:00
Linus Torvalds 02b2318e07 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (26 commits)
  [SPARC64]: Fix UP build.
  [SPARC64]: dr-cpu unconfigure support.
  [SERIAL]: Fix console write locking in sparc drivers.
  [SPARC64]: Give more accurate errors in dr_cpu_configure().
  [SPARC64]: Clear cpu_{core,sibling}_map[] in smp_fill_in_sib_core_maps()
  [SPARC64]: Fix leak when DR added cpu does not bootup.
  [SPARC64]: Add ->set_affinity IRQ handlers.
  [SPARC64]: Process dr-cpu events in a kthread instead of workqueue.
  [SPARC64]: More sensible udelay implementation.
  [SPARC64]: SMP build fixes.
  [SPARC64]: mdesc.c needs linux/mm.h
  [SPARC64]: Fix build regressions added by dr-cpu changes.
  [SPARC64]: Unconditionally register vio_bus_type.
  [SPARC64]: Initial LDOM cpu hotplug support.
  [SPARC64]: Fix setting of variables in LDOM guest.
  [SPARC64]: Fix MD property lifetime bugs.
  [SPARC64]: Abstract out mdesc accesses for better MD update handling.
  [SPARC64]: Use more mearningful names for IRQ registry.
  [SPARC64]: Initial domain-services driver.
  [SPARC64]: Export powerd facilities for external entities.
  ...
2007-07-16 10:45:23 -07:00
Linus Torvalds b91cba52e9 Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (68 commits)
  sh: sh-rtc support for SH7709.
  sh: Revert __xdiv64_32 size change.
  sh: Update r7785rp defconfig.
  sh: Export div symbols for GCC 4.2 and ST GCC.
  sh: fix race in parallel out-of-tree build
  sh: Kill off dead mach.c for hp6xx.
  sh: hd64461.h cleanup and added comments.
  sh: Update the alignment when 4K stacks are used.
  sh: Add a .bss.page_aligned section for 4K stacks.
  sh: Don't let SH-4A clobber SH-4 CFLAGS.
  sh: Add parport stub for SuperIO ports.
  sh: Drop -Wa,-dsp for DSP tuning.
  sh: Update dreamcast defconfig.
  fb: pvr2fb: A few more __devinit annotations for PCI.
  fb: pvr2fb: Fix up section mismatch warnings.
  sh: Select IPR-IRQ for SH7091.
  sh: Correct __xdiv64_32/div64_32 return value size.
  sh: Fix timer-tmu build for SH-3.
  sh: Add cpu and mach links to CLEAN_FILES.
  sh: Preliminary support for the SH-X3 CPU.
  ...
2007-07-16 10:32:02 -07:00
Jes Sorensen 17e0c7cc1d sn_console section mismatch warning
Do not mark sn_sal_console_setup as __init since it's referenced from
non init data structures.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:53 -07:00
Alan Cox d471d340ef 68360serial: remove broken optimisation
Remove the broken 'no termios change' optimisation for this driver.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:51 -07:00
Haavard Skinnemoen 9e6077bd84 atmel_serial: fix break handling
The RXBRK field in the AT91/AT32 USART status register has the
following definition according to e.g. the AT32AP7000 data sheet:

    RXBRK: Break Received/End of Break
    0: No Break received or End of Break detected since the last RSTSTA.
    1: Break Received or End of Break detected since the last RSTSTA.

Thus, for each break, the USART sets the RXBRK bit twice. This patch
modifies the driver to report the break event to the serial core only
once by keeping track of whether a break condition is currently
active. The break_active flag is reset as soon as a character is
received, so even if we miss the start-of-break interrupt this should
do the right thing.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <andrew@sanpeople.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ivan Kuten <ivan.kuten@promwad.com>
Cc: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:45 -07:00
Thiemo Seufer c1fbac4479 Update zilog timeout
Update zilog timeout, thanks Peter Fuerst.

Signed-off-by: Thiemo Seufer <ths@networkno.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Cc: Peter Fuerst <pf@net.alphadv.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:42 -07:00
Yinghai Lu 18a8bd949d serial: convert early_uart to earlycon for 8250
Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
include/asm-x86_64/serial.h.  the serial8250_ports need to be probed late in
serial initializing stage.  the console_init=>serial8250_console_init=>
register_console=>serial8250_console_setup will return -ENDEV, and console
ttyS0 can not be enabled at that time.  need to wait till uart_add_one_port in
drivers/serial/serial_core.c to call register_console to get console ttyS0.
that is too late.

Make early_uart to use early_param, so uart console can be used earlier.  Make
it to be bootconsole with CON_BOOT flag, so can use console handover feature.
and it will switch to corresponding normal serial console automatically.

new command line will be:
	console=uart8250,io,0x3f8,9600n8
	console=uart8250,mmio,0xff5e0000,115200n8
or
	earlycon=uart8250,io,0x3f8,9600n8
	earlycon=uart8250,mmio,0xff5e0000,115200n8

it will print in very early stage:
	Early serial console at I/O port 0x3f8 (options '9600n8')
	console [uart0] enabled
later for console it will print:
	console handover: boot [uart0] -> real [ttyS0]

Signed-off-by: <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:35 -07:00
Yinghai Lu 79492689e4 serial: assert DTR for serial console devices
Some RS-232 devices require DTR to be asserted before they can be used.  DTR
is normally asserted in uart_startup() when the port is opened.  But we don't
actually open serial console ports, so assert DTR when the port is added.

BTW:
earlyprintk and early_uart are hard coded to set DTR/RTS.

rmk says

  The only issue I can think of is the possibility for an attached modem to
  auto-answer or maybe even auto-dial before the system is ready for it to do
  so.  Might have an undesirable cost implication for some running with such a
  setup.

  Apart from that, I can't think of any other side effect of this specific
  patch.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16 09:05:34 -07:00
David S. Miller f3c681c028 [SERIAL]: Fix console write locking in sparc drivers.
Mirror the logic in 8250 for proper console write locking
when SYSRQ is triggered or an OOPS is in progress.

Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-16 04:05:28 -07:00
Linus Torvalds 21ba0f88ae Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...
2007-07-12 13:40:57 -07:00
Linus Torvalds 0b9062f6b5 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Rename PC speaker code
  [MIPS] Don't use genrtc.
  [MIPS] Remove unused time.c for swarm
  [MIPS] Sparse: Use NULL for pointer
  [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
  [MIPS] SMTC: Interrupt mask backstop hack
  [MIPS] separate platform_device registration for VR41xx RTC
  [MIPS] Separate platform_device registration for VR41xx GPIO
  [MIPS] MIPSsim: Fix build.
  [MIPS] separate platform_device registration for VR41xx serial interface
  [MIPS] Include cacheflush.h in uncache.c
  [MIPS] Cleanup tlbdebug.h
  [MIPS] Change names of local variables to silence sparse (part 2)
  [MIPS] Workaround for a sparse warning in include/asm-mips/io.h
  [MIPS] RM: Use only phyiscal address for 82596 and 53c710
  [MIPS] Hydrogen3: Remove remaining bits of code.
  [MIPS] DEC: Fix modpost warning.
  Revert "[MIPS] DEC: Fix modpost warning."
  [MIPS] Fix resume for 64K page size on R4000 class processors.
2007-07-12 13:28:54 -07:00
Yoichi Yuasa 891649409e [MIPS] separate platform_device registration for VR41xx serial interface
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-07-12 17:41:13 +01:00
Roy Huang f4d640c9be Blackfin serial driver: supporting BF548-EZKIT serial port
Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 16:43:46 +08:00
Auke Kok 44c10138fd PCI: Change all drivers to use pci_device->revision
Instead of all drivers reading pci config space to get the revision
ID, they can now use the pci_device->revision member.

This exposes some issues where drivers where reading a word or a dword
for the revision number, and adding useless error-handling around the
read. Some drivers even just read it for no purpose of all.

In devices where the revision ID is being copied over and used in what
appears to be the equivalent of hotpath, I have left the copy code
and the cached copy as not to influence the driver's performance.

Compile tested with make all{yes,mod}config on x86_64 and i386.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:02:10 -07:00
Paul Mackerras bf22f6fe2d Merge branch 'for-2.6.23' into merge 2007-07-11 13:28:26 +10:00
Ishizaki Kou e34b9c94b6 [POWERPC] of_serial: add port type checking
Currently, of_serial driver supports only 8250 compatible ports, but
prepares that others can easily be added.  Yet unregister routine
assumes port is 8250.  This corrects unregister routine to check
port type.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:42 +10:00
Ishizaki Kou 1558f9b44e [POWERPC] of_serial: Ignore unknown serial port
Current of_serial driver assumes unknown serial port to be 8250.  But
this behavior may cause fatal problems when the serial port is not
8250.  This corrects probe routine to ignore unknown serial port.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-10 21:53:41 +10:00
Kumar Gala 90faf4fa79 [POWERPC] CPM_UART: Use inline function form of eieio
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-10 00:33:19 -05:00
Komuro 40738f3fcd PCMCIA-NETDEV : add new ID of lan&modem multifunction card
fmvj18x_cs:
      NEC PK-UG-J001
      Panasonic CF-VML201
      Panasonic TO-PDL9610

pcnet_cs:
       MICRO-RESEARCH  MC336LAN

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-08 22:16:39 -04:00
Jay Lubomirski 2f4d4da8f8 serial: clear proper MPSC interrupt cause bits
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the
interrupt for both controllers instead of just the one its supposed to.
This can result in the other controller appearing to hang because its
interrupt was effectively lost.

So, don't clear the interrupt cause bits for both MPSC controllers when
clearing the interrupt for one of them.  Just clear the one that is
supposed to be cleared.

Signed-off-by: Jay Lubomirski <jaylubo@motorola.com>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28 11:38:29 -07:00
Sonic Zhang 474f1a667d Blackfin arch: kgdb specific code
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-29 16:35:17 +08:00
Paul Mundt 2b1bd1ac5d sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:27:10 +09:00
Mike Frysinger 19aa6382e3 Blackfin serial driver: decouple PARODD and CMSPAR checking from PARENB
as the termios info does not stipulate that the former are dependent on the latter

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 16:16:45 +08:00
Mike Frysinger cf68676222 Blackfin serial driver: actually implement the break_ctl() function
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 16:12:49 +08:00
Mike Frysinger 9808901b6c Blackfin serial driver: ignore framing and parity errors
if we get a break signal, we want to ignore framing and parity errors
because those will always be set (by nature of the signal)

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Mike Frysinger c16c3ca79a Blackfin serial driver: hook up our UARTs STP bit with userspaces CMSPAR
so we can now do spaced/marked parity

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-06-11 15:31:30 +08:00
Paul Mundt 05627486ab sh: Fix SH-4 CPU selects.
Now that select no longer works for selecting the "closest" CPU,
we have to explicitly reference the precise sub-type in the few
places where it actually matters (presently only setup code and
some legacy sh-sci cruft).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:40 +00:00