Commit Graph

157 Commits

Author SHA1 Message Date
Tony Lindgren 19dc8a5b06 ARM: OMAP1: Compile in other 16xx boards to OSK defconfig
This allows monitoring compile issues with Kautobuild for
other omap1 boards until we have more board specific defconfig
files.

After 2.6.25, we can add a generic config_omap_generic16xx to
compile in support for all 16xx boards and then remove other
boards from OSK defconfig.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06 13:28:06 +02:00
Tony Lindgren d68a8ce834 ARM: OMAP1: Refresh H2 defconfig
Refresh H2 defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06 13:27:16 +02:00
Tony Lindgren d4423fd079 ARM: OMAP1: Refresh OSK defconfig
Refresh OSK defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-03-06 13:27:16 +02:00
Russell King f9166e736e Merge branches 'master', 'omap1-upstream' and 'orion' into devel
* master:
  [ARM] constify function pointer tables
  [ARM] 4823/1: AT91 section fix
  [ARM] 4824/1: pxa: clear RDH bit after any reset
  [ARM] pxa: remove debugging PM: printk

* omap1-upstream:
  ARM: OMAP1: Misc clean-up
  ARM: OMAP1: Update defconfigs for omap1
  ARM: OMAP1: Palm Tungsten E board clean-up
  ARM: OMAP1: Use I2C bus registration helper for omap1
  ARM: OMAP1: Remove omap_sram_idle()
  ARM: OMAP1: PM fixes for OMAP1
  ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  ARM: OMAP1: Make omap1 use MMC multislot structures
  ARM: OMAP1: Change the comments to C style
  ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
  ARM: OMAP: Add helper module for board specific I2C bus registration
  ARM: OMAP: Add dmtimer support for OMAP3
  ARM: OMAP: Pre-3430 clean-up for dmtimer.c
  ARM: OMAP: Add DMA support for chaining and 3430
  ARM: OMAP: Add 24xx GPIO debounce support
  ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
  ARM: OMAP: Add 3430 gpio support
  ARM: OMAP: Add 3430 CPU identification macros
  ARM: OMAP: Request DSP memory for McBSP

* orion:
  [ARM] Orion: Use the sata_mv driver for the TS-209 SATA
  [ARM] Orion: Use the sata_mv driver for the Kurobox SATA
  [ARM] Orion: free up kernel virtual address space
  [ARM] Orion: distinguish between physical and virtual addresses
  [ARM] Orion: kill orion_early_putstr()
  [ARM] Orion: update defconfig
  [ARM] Orion: Use the sata_mv driver for the integrated SATA controller
2008-02-09 22:47:23 +00:00
Tony Lindgren 80dbfde54b ARM: OMAP1: Update defconfigs for omap1
Update defconfigs for omap1

Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08 10:38:02 -08:00
Felipe Balbi 138ab9f832 ARM: OMAP1: Make omap1 use MMC multislot structures
Make omap1 use new MMC multislot structures. The related MMC
patches will be sent separately.

Signed-off-by: Felipe Balbi <felipe.lima@indt.org.br>
Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: David Cohen <david.cohen@indt.org.br>
Signed-off-by: Eduardo Valentin <eduardo.valentin@indt.org.br>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-02-08 10:38:01 -08:00
Nicolas Pitre 3c96e5a440 [ARM] Orion: update defconfig
Signed-off-by: Nicolas Pitre <nico@marvell.com>
2008-02-08 11:52:23 -05:00
Rod Whitby b7edc84a96 [ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards
Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig.

Sets up the corresponding platform data for the nslu2 and nas100d
boards, and reads the ethernet MAC address from the internal flash.

Tested on both little-endian and big-endian kernels.

Tested-by: Tom King <tom@websb.net>

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Michael Westerhof <mwester@dls.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:26 +00:00
Rod Whitby 1208ebf25b [ARM] 4805/1: ixp4xx: Use leds-gpio driver instead of IXP4XX-GPIO-LED driver
These are the only three boards to use the IXP4XX-GPIO-LED driver, and
they can all use the new leds-gpio driver instead with no change in
functionality.

--

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:26 +00:00
Rod Whitby 95053aec4d [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards
This updates the defconfig for the ixp4xx machine in arch/arm/config
taking all the defaults, with the following additions:

1) Enable support for the nslu2, loft, gateway7001, wg302v2,
   dsmg600, and gtwx5715 boards.
2) Enable EABI, OABI, HOTPLUG and FW_LOADER.
3) Enable the RTC subsystem, with drivers for the RTC chips on the
   nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards.
4) Enable the LEDS subsystem to support the nslu2, nas100d and
   dsmg600 boards.  Enable the ixp4xx beeper driver.
5) Enable the USB subsystem, USB host driver support and USB mass
   storage support (required for boot disk on nslu2 board).
6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600
   (pata_artop) and avila (ixp4xx_cf) boards.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:23 +00:00
Russell King 0ff66f0c7a Merge branch 'pxa-plat' into devel
* pxa-plat: (53 commits)
  [ARM] 4762/1: Basic support for Toradex Colibri module
  [ARM] pxa: fix mci_init functions returning -1
  [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
  [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270
  [ARM] 4746/1: pcm027: network support for phyCORE-PXA270
  [ARM] 4745/1: pcm027: default configuration
  [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module
  [NET] smc91x: Make smc91x use IRQ resource trigger flags
  [ARM] pxa: add default config for littleton
  [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform)
  [ARM] 4664/1: Add basic support for HTC Magician PDA phones
  [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
  [ARM] pxa: skip registers saving/restoring if entering standby mode
  [ARM] pxa: fix PXA27x resume
  [ARM] pxa: Avoid fiddling with CKEN register on suspend
  [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
  [ARM] pxa: Add zylonite MFP wakeup configurations
  [ARM] pxa: program MFPs for low power mode when suspending
  [ARM] pxa: make MFP configuration processor independent
  [ARM] pxa: remove un-used pxa3xx_mfp_set_xxx() functions
  ...

Conflicts:

	arch/arm/mach-pxa/ssp.c

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:21:38 +00:00
Russell King c00d4ffdba Merge branch 'orion' into devel
* orion: (26 commits)
  [ARM] Orion: implement power-off method for QNAP TS-109/209
  [ARM] Orion: add support for QNAP TS-109/TS-209
  [ARM] Orion: I2C support
  [I2C] i2c-mv64xxx: Don't set i2c_adapter.retries
  [I2C] Split mv643xx I2C platform support
  [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323
  [ARM] Orion defconfig
  [ARM] Orion: add support for Orion/MV88F5181 based D-Link DNS-323
  [ARM] Orion: MV88F5181 support bits
  [ARM] Orion: Buffalo/Revogear Kurobox Pro support
  [ARM] OrionNAS RD board support
  [ARM] Orion: support for Marvell Orion-2 (88F5281) Development Board
  [ARM] Orion: common platform setup for Gigabit Ethernet port
  [ARM] Orion: platform device registration for UART, USB and NAND
  [ARM] Orion: system timer support
  [ARM] Orion edge GPIO IRQ support
  [ARM] Orion: IRQ support
  [ARM] Orion: provide GPIO method for enabling hardware assisted blinking
  [ARM] Orion: GPIO support
  [ARM] Orion: programable address map support
  ...

Conflicts:

	arch/arm/Kconfig
	arch/arm/Makefile

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:21:30 +00:00
Russell King d0d42df2a4 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel
* at91: (24 commits)
  [ARM] 4615/4: sam926[13]ek buttons updated
  [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
  [ARM] 4764/1: [AT91] AT91CAP9 core support
  [ARM] 4738/1: at91sam9261: Remove udc pullup enabling in board initialisation
  [ARM] 4761/1: [AT91] Board-support for NEW_LEDs
  [ARM] 4760/1: [AT91] SPI CS0 errata on AT91RM9200
  [ARM] 4759/1: [AT91] Buttons on CSB300
  [ARM] 4758/1: [AT91] LEDs
  [ARM] 4757/1: [AT91] UART initialization
  [ARM] 4756/1: [AT91] Makefile cleanup
  [ARM] 4755/1: [AT91] NAND update
  [ARM] 4754/1: [AT91] SSC library support
  [ARM] 4753/1: [AT91] Use DMA_BIT_MASK
  [ARM] 4752/1: [AT91] RTT, RTC and WDT peripherals on SAM9
  [ARM] 4751/1: [AT91] ISI peripheral on SAM9263
  [ARM] 4750/1: [AT91] STN LCD displays on SAM9261
  [ARM] 4734/1: at91sam9263ek: include IRQ for Ethernet PHY
  [ARM] 4646/1: AT91: configurable HZ, default to 128
  [ARM] 4688/1: at91: speed-up irq processing
  [ARM] 4657/1: AT91: Header definition update
  ...

* ep93xx:
  [ARM] 4671/1: ep93xx: remove obsolete gpio_line_* operations
  [ARM] 4670/1: ep93xx: implement IRQT_BOTHEDGE gpio irq sense type
  [ARM] 4669/1: ep93xx: simplify GPIO code and cleanups
  [ARM] 4668/1: ep93xx: implement new GPIO API

* iop:
  [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field
  [ARM] 4732/1: GLAN Tank: register rtc-rs5c372 i2c device
  [ARM] 4708/1: iop: update defconfigs for 2.6.24

* kprobes:
  ARM kprobes: let's enable it
  ARM kprobes: special hook for the kprobes breakpoint handler
  ARM kprobes: prevent some functions involved with kprobes from being probed
  ARM kprobes: don't let a single-stepped stmdb corrupt the exception stack
  ARM kprobes: add the kprobes hook to the page fault handler
  ARM kprobes: core code
  ARM kprobes: instruction single-stepping support

* ks8695:
  [ARM] 4603/1: KS8695: debugfs interface to view pin state
  [ARM] 4601/1: KS8695: PCI support

* misc:
  [ARM] remove duplicate includes
  [ARM] CONFIG_DEBUG_STACK_USAGE
  [ARM] 4689/1: small comment wrap fix
  [ARM] 4687/1: Trivial arch/arm/kernel/entry-common.S comment fix
  [ARM] 4666/1: ixp4xx: fix sparse warnings in include/asm-arm/arch-ixp4xx/io.h
  [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
  [SERIAL] 21285: Report baud rate back via termios
  [ARM] Remove pointless casts from void pointers,
  [ARM] Misc minor interrupt handler cleanups
  [ARM] Remove at91_lcdc.h
  [ARM] ARRAY_SIZE() cleanup
  [ARM] Update mach-types

* msm:
  [ARM] msm: dma support for MSM7X00A
  [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
  [ARM] msm: irq and timer support for ARCH_MSM7X00A
  [ARM] msm: core platform support for ARCH_MSM7X00A

* s3c2410: (33 commits)
  [ARM] 4795/1: S3C244X: Add armclk and setparent call
  [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code
  [ARM] 4793/1: S3C24XX: Add IRQ->GPIO pin mapping function
  [ARM] 4792/1: S3C24XX: Remove warnings from debug-macro.S
  [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk
  [ARM] 4790/1: S3C2412: Fix parent selection for msysclk.
  [ARM] 4789/1: S3C2412: Add missing CLKDIVN register values
  [ARM] 4788/1: S3C24XX: Fix paramet to s3c2410_dma_ctrl if S3C2410_DMAF_AUTOSTART used.
  [ARM] 4787/1: S3C24XX: s3c2410_dma_request() should return the allocated channel number
  [ARM] 4786/1: S3C2412: Add SPI FIFO controll constants
  [ARM] 4785/1: S3C24XX: Add _SHIFT definitions for S3C2410_BANKCON registers
  [ARM] 4784/1: S3C24XX: Fix GPIO restore glitches
  [ARM] 4783/1: S3C24XX: Add s3c2410_gpio_getpull()
  [ARM] 4782/1: S3C24XX: Define FIQ_START for any FIQ users
  [ARM] 4781/1: S3C24XX: DMA suspend and resume support
  [ARM] 4780/1: S3C2412: Allow for seperate DMA channels for TX and RX
  [ARM] 4779/1: S3C2412: Add s3c2412_gpio_set_sleepcfg() call
  [ARM] 4778/1: S3C2412: Add armclk and init from DVS state
  [ARM] 4777/1: S3C24XX: Ensure clk_set_rate() checks the set_rate method for the clk
  [ARM] 4775/1: s3c2410: fix compilation error if only s3c2442 cpu is selected
  ...

* sa1100:
  [ARM] sa1100: add clock source support

* vfp:
  [ARM] 4584/2: ARMv7: Add Advanced SIMD (NEON) extension support
  [ARM] 4583/1: ARMv7: Add VFPv3 support
  [ARM] 4582/2: Add support for the common VFP subarchitecture
2008-01-28 13:21:21 +00:00
Daniel Mack 4e4fc05a2b [ARM] 4762/1: Basic support for Toradex Colibri module
This patch adds support for Toradex' PXA27x based Colibri module.
It's kept as simple as possible to only provide basic functionality.
A default config is also included.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:27 +00:00
Robert Schwebel 8b0b9fb531 [ARM] 4745/1: pcm027: default configuration
This patch adds a basic configration for the phyCORE-PXA270 development kit. In this case development kit means PCM-990 (main baseboard).

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:22 +00:00
eric miao 1709e2af78 [ARM] pxa: add default config for littleton
default to

- PXA300/PXA310 support only (there isn't any littleton board with PXA320
  processor for now)

- smc91x ethernet support with NFS rootfs

- LCD framebuffer support with graphics console

Signed-off-by: eric miao <eric.miao>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:18 +00:00
Ian Molton 3abcd199db [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
This patch contains the base code to boot the Toshiba e330, e740,
e750, e400, and e800 PDAs.

Signed-off-by: Ian Molton <spyro@f2s.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-28 13:13:13 +00:00
Byron Bradley 3faf2ee870 [ARM] Orion: add support for QNAP TS-109/TS-209
This patch adds support for the Orion/MV88F5182 based QNAP
TS-109/TS-209 NAS device. The driver for the S-35390A RTC
chip on this board has been submitted to LKML separately.

Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Tested-by: Oyvind Repvik <repvik@kynisk.com>
Tested-by: Tim Ellis <timtimred@foonas.org>
Tested-by: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Tzachi Perelstein <tzachi@marvell.com>
2008-01-26 15:04:03 +00:00
Martin Michlmayr 60ce1c2006 [ARM] Orion: enable CONFIG_RTC_DRV_M41T80 for D-Link DNS-323
The D-Link DNS-323 uses a M41T80 RTC chip, so enable this driver in
the Orion defconfig.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: Herbert Valerio Riedel <hvr@gnu.org>
Acked-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:03:58 +00:00
Tzachi Perelstein eb3cef84ad [ARM] Orion defconfig
Basic selections for Orion machines

Signed-off-by: Tzachi Perelstein <tzachi@marvell.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:03:57 +00:00
Andrew Victor 86640cae60 [ARM] 4765/1: [AT91] AT91CAP9A-DK board support
Add support for the Atmel AT91CAP9A-DK Evaluation Kit board.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 15:01:14 +00:00
Robert P. J. Day e173dbf688 [ARM] remove reference to non-existent MTD_OBSOLETE_CHIPS
The CONFIG variable MTD_OBSOLETE_CHIPS was deleted in commit
ba7cc09c9c.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 14:50:02 +00:00
Brian Swetland 9e73c84c89 [ARM] msm: board file for MACH_HALIBUT (QCT MSM7200A)
Add support for the Qualcomm MSM7200A eval board.
Common devices are defined in common.c, to avoid excessive
cut'n'pasting them into other board files.

Signed-off-by: Brian Swetland <swetland@google.com>
2008-01-26 14:39:14 +00:00
Dan Williams ecdc902bf8 [ARM] 4708/1: iop: update defconfigs for 2.6.24
* iop13xx, iop33x, iop32x: re-enable the IOP_ADMA driver by default
* iop32x: enable RS5C372 and RTC_CLASS support

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26 14:37:57 +00:00
eric miao 1398f679df [ARM] 4636/1: pxa: add default configuration for zylonite
Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-31 15:21:48 +00:00
Russell King 0181b61a98 Merge branch 'pxa' into devel 2007-10-15 18:56:02 +01:00
Mike Rapoport 3696a8a426 [ARM] 4576/1: CM-X270 machine support
This patch provides core support for CM-X270 platform.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-15 18:53:57 +01:00
Tony Lindgren e898088e25 ARM: OMAP: Add omap osk defconfig
Add omap osk defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20 18:34:51 -07:00
Tony Lindgren b250428461 ARM: OMAP: Update omap h2 defconfig
Update omap h2 defconfig

Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-09-20 18:34:50 -07:00
Russell King 6e7d934060 [ARM] rpc: update defconfig
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-06 16:48:49 +01:00
Dan Williams 581cf23b51 [ARM] 4541/1: iop: defconfig updates
With the availability of the iop-adma driver iop platforms can now use
their offload engines for md-raid5 (copy+xor) and net-dma (tcp receive
copy) offload.

Cc: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-08-04 22:13:47 +01:00
Russell King 5957a4eb28 Merge branches 'at91', 'imx', 'iop', 'ixp', 'ks8695', 'misc', 'ns9xxx', 'pxa' and 's3c' into devel 2007-07-22 17:09:17 +01:00
Ben Dooks a45f82616e [ARM] 4518/1: S3C: Rename watchdog configuration options
Rename the S3C24XX configuration options for the watchdog
boot controls for moving to the arch/arm/plat-s3c moves.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 16:44:38 +01:00
Ben Dooks 3ec20520dd [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
Rename DEBUG_S3C2410_PORT to DEBUG_S3C_PORT as well as
DEBUG_S3C2410_UART to DEBUG_S3C_UART as part of the updates
to moving to plat-s3c for S3C base support.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 16:44:33 +01:00
Ben Dooks c76578460f [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT to be
CONFIG_S3C_LOWLEVEL_UART_PORT as we move to using
plat-s3c for base of S3C operations.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22 16:44:32 +01:00
Mike Rapoport 3d50527bbf [ARM] 4475/2: EM-x270 board support
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-20 17:45:15 +01:00
Jean Delvare e24b8cb4fa i2c: Delete the i2c-isa pseudo bus driver
There are no users of i2c-isa left, so we can finally get rid of it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
2007-07-19 14:25:20 -04:00
Andrew Victor 9bf77ee6c2 [ARM] 4333/2: KS8695: Micrel Development board
Board support and default configuration file for the Micrel/Kendin
KS8695 Development board.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 22:02:55 +01:00
Andrew Victor c42dcb3dcf [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board
Add support for the Atmel AT91SAM9RL-EK development board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 21:07:59 +01:00
Jürgen Schindele c9184f58ca [ARM] 4362/1: trizeps4 update
This update for trizeps4 SoM contains:
- support for new TFT on more recent ConXS evalboard
- correct partition of flash device
- update of "trizeps4_defconfig"

Signed-off-by: Jrgen Schindele (linux@schindele.name)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 17:19:20 +01:00
Russell King 5cd4715515 Merge branch 'ixp4xx' into devel
Conflicts:

	include/asm-arm/arch-ixp4xx/io.h
2007-05-06 20:58:29 +01:00
Simon Richter 5d01f13341 [ARM] 4300/1: Add picotux 200 ARM board
Add the picotux 200 ARM board:
 - Enable its machine type in the filter in head.S
 - Add configuration option
 - Add board initialisation
 - Add default configuration

Signed-off-by: Simon Richter <Simon.Richter@kleinhenz.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 21:01:08 +01:00
Ruslan V. Sushko 45fba0846f [ARM] 4311/1: ixp4xx: add KIXRP435 platform
Add Intel KIXRP435 Reference Platform based on IXP43x processor.
Fixed after review : access to cp15 removed in identification functions,
used access to global processor_id instead

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com>
Signed-off-by: Ruslan  Sushko <rsushko@ru.mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 20:51:55 +01:00
Ben Dooks 1af1e32ade [ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6
Update defconfig to the latest kernel version
and enable the h1940 LED driver

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-16 21:03:00 +01:00
Ben Dooks f8dbf45fab [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig
Add the Armzone QT2410 to the list of built
machines in the s3c2410_defconfig

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22 14:53:25 +00:00
Ben Dooks b9c28081a7 [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1
Udpate s3c2410_defconfig for 2.6.21-rc1

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-22 14:53:24 +00:00
Russell King 8213084125 Merge NetSilicon NS93xx tree
Fixed conflicts:

	arch/arm/Makefile
	arch/arm/mm/Kconfig

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-18 11:27:07 +00:00
Russell King f69eda00d4 Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees 2007-02-17 20:09:53 +00:00
Uwe Kleine-König b77bfa84c4 [ARM] 4211/1: Provide a defconfig for ns9xxx
This is a follow up for the patch providing the base support for the
ns9xxx machine type.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17 20:05:48 +00:00
David Brownell f1e1398654 [ARM] 4207/1: defconfig fixes, use RTC_DRV_AT91RM9200
When "rtc-at91" was renamed to "rtc-at91rm9200" not all the relevant
defconfig entries were updated.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-16 13:03:56 +00:00