Onr warning is left, since it is there for a purpose:
tm6000-core.c:218: warning: ISO C90 forbids mixed declarations and code
It indicates a place where a temporary hack were added. Tests are needed to be sure that
we can remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Instead of storing next buf on a temp var, saved over URB
processing, restore it using get_next_buf.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
A previous committed patch hanged image output. This patch corrects this issue.
It also warrants that buffer is updated for each frame0+frame1 frame set.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
tm6000 sometimes can't read from i2c, but this is currently required for
tuner-xc2028 to work.
This patch adds an option to tuner-xc2028 to not rely on i2c reading.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This requires a little more memory, and some memcpy to work, but the logic is
simpler than the previous method.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Update the descriptions of the USB request types so that they match what
we now know they do.
Rework the i2c_xfer function so that it is more explicit what sort of I2C
transfers it is that the tm6000 can't perform.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Thanks to Mike Krufky for pointed that one out. Also include some minor
cleanups.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
tm5600/6000/6010 requires a large config table for video standards. Better to
move this to their own file.
Also added register settings for tm6010 (needs testing.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
if a transfer buffer allocation fails, the last allocated urb is leaked
(it hasn't been stored in dev->urb[] yet so tm6000_uninit_isoc misses
it). The patch also includes a small typo fix.
Thanks to Florin Malita <fmalita@gmail.com> for pointing this.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Previously, there were no sync between video buffer filling and received
URBs. So, the presented image were a mix of frame and frame-1. Now, a
filled buffer should contain only data for that frame.
allocates a maximum of 64 KB per each URB area. This fixed two bugs:
- Sometimes, there were no available continuos block of about 1 MB;
- Image weren't not properly updated, since parts of the URBs aren't
updated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Remove code dealing with the ZL10353 as this is all handled by the ZL10353
module.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Modify tuner_callback to user the device's GPIO address field
for tuner reset.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add tuner reset GPIO and demodulator address fields to the tm6000_core
struct.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
SMBus Write Byte commands followed by a read command on the same I2C
address are not sent out to the chip as they wouldn't have any effect.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Add GPIO4 reset, which is required to make DVB-T work with the Freecom
stick.
Add a general 5 ms pause to the "tm6000_read_write_usb" method.
Signed-off-by: Michel Ludwig <michel.ludwig@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Adds a driver for Trident TV Master tm5600/tm6000 chips.
Those USB devices are usually found with a Xceive xc2028/xc3028
tuner, although the firmware seems to be modified to work with
those chips on some older devices.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
There is no need trying to load the (even in most cases) not availible
firmware after suspend. This saves about 30 secounds on reset waiting
for timeout.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kmemdup when some other buffer is immediately copied into the
allocated region.
A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
expression from,to,size,flag;
statement S;
@@
- to = \(kmalloc\|kzalloc\)(size,flag);
+ to = kmemdup(from,size,flag);
if (to==NULL || ...) S
- memcpy(to, from, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use kcalloc or kzalloc rather than the combination of kmalloc and memset.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,y,flags;
statement S;
type T;
@@
x =
- kmalloc
+ kcalloc
(
- y * sizeof(T),
+ y, sizeof(T),
flags);
if (x == NULL) S
-memset(x, 0, y * sizeof(T));
@@
expression x,size,flags;
statement S;
@@
-x = kmalloc(size,flags);
+x = kzalloc(size,flags);
if (x == NULL) S
-memset(x, 0, size);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
This is a patch to the file udlfb.c that fixes a missing KERN_INFO and
removes one whitespace before a newline.
Signed-off-by: Soeren Moeller <soerenmoeller2001@gmail.com>
Cc: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch introduces a v4l2 state machine, so now
CONFIG_DT3155_STREAMING is no more needed.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_core.c file that fixes the C99 comments
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the r8180_core.c file that fixes the space
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
added the necessary infrastructure for the leds on the device
this is a port from Realteks driver.
leds are now working partially.
Signed-off-by: Florian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes some long line lengths in comedi.h from checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes long line lengths in comedi.h that were picked up by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
this adds and sorts the module labels MODULE_AUTHOR, MODULE_DESCRIPTION
and MODULE_LICENSE for all comedi PCMCIA drivers.
Signed-off-by: Alexander Kurz <linux@kbdbabel.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes lots of long line lengths in comedi_fops.c found by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes the driver after merge into the 2.6.34 kernel. Driver should
be functional again (a fix to make it compile broke the driver).
Patch against 2.6.34 RC7 with patch-v2.6.34-rc7-next-20100513
already applied.
Removed conditional code based on kernel version, this is pointless
now the driver is part of the kernel. Also removed obsolte code
left over from previous patches. Includes also small fixes to compile
clean again.
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Currently, each ramzswap device can be assigned
a separate 'backing swap' file/partition. The ramzswap
driver forwards swap I/O requests to this backing swap
whenever an incompressible page is found.
This feature adds nearly 700 lines of code and it
also duplicates much of the swapon() functionality
(for example, finding swap extents and so on). Removing
this code makes the driver much simpler and should
help its transition from staging to stable drivers
area (drivers/block/).
Similar functionality may be implemented if we can
implement migrating pages across swap devices but the
details have not yet been worked out.
Support for _partitions_ as backing swap could be
retained as it requires a few lines of code only.
This part can be re-introduced later if above swap
migration method turns out to be infeasible.
More cleanups and code comments will be added soon.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove empty OUT definition used to specify output parameters.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove empty IN definition used to specify input parameters.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for signed 8-bit integers, which was not used.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 32-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 16-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed custom macro for unsigned 8-bit integers.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Part of this code is already in my MSM tree. I'll move the rest
forward through my tree also.
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
CC: Pavel Machek <pavel@ucw.cz>
CC: linux-arm-msm@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all rcu head inits. We don't care about the RCU head state before
passing it to call_rcu() anyway. Only leave the "on_stack" variants so
debugobjects can keep track of objects on stack.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Cc: Marek Lindner <lindner_marek@yahoo.de>
Cc: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the usbdux.c file that resolve 2 errors in coding and
fix the warning about lengt of code lines
Signed-off-by: Morgan Gatti <morgan.gatti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleared all findings but a couple of 'do not add new typedefs' warnings.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Drop cast on the result of kmalloc and similar functions.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
@@
- (T *)
(\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\|
kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...))
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan said that memrar should depend on RAR_REGISTER
(instead of selecting it).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ossama Othman <ossama.othman@intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes the C99 comments
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes quite a few long line lengths in comedi.h as reported by
checkpatch.pl
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In http://bugzilla.novell.com/show_bug.cgi?id=597299, the vt6655 driver
generates a kernel BUG on a NULL pointer dereference at NULL. This problem
has been traced to a failure in the wpa_set_wpadev() routine. As the vt6656
driver does not call this routine, the vt6655 code is similarly set to skip
the call.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Richard Meek <osl2008@googlemail.com>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resolved all warnings/errors but lines having over 80 characters.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the code actually gets selected in the kernel config
properly, all of the build errors start showing up.
This patch papers over a few of them to get the code to build, I have
no idea if it actually works now or not...
Cc: Henk de Groot <pe1dnn@amsat.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the wireless drivers to depend on CONFIG_WLAN instead of
CONFIG_WLAN_80211 which is gone.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Credits go to Joe Perches <joe@perches.com> for suggesting the changes.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes the unnecessary braces
style issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the wl_profile.c file that fixes whitespace
issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The previous patch "use_local_copy_qtype_ops.patch"
http://lkml.org/lkml/2010/5/9/40
has introduced a new BUG.
This patch corrects it.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
dt3155v4l driver, as in -rc6-next-20100506 has a BUG.
When it modifies q->int_ops structure in videobuf-dma-contig
module the change is visible for all other modules using it.
Make a local copy of this structure and use its modification
to solve the bug.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch replaces <asm/uaccess.h> with <linux/uaccess.h> to comply with
the checkpatch.pl hint.
Signed-off-by: Takanori Suzuki <mail.tks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192e, rtl8192su, and rtl8192u drivers all share what appears
to be a common private ieee80211 stack. Various patches have been
applied to the rtl819x_Qos.h file for some of the drivers but not the
others.
This sync's the files based on all the applied patches.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The rtl8192e, rtl8192su, and rtl8192u drivers all share what appears
to be a common private ieee80211 stack. Various patches have been
applied to the rtl819x_TSProc.c file for some of the drivers but not
the others.
This sync's the files based on all the applied patches.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I fixed all problems found by checkpatch.pl except a number of long
lines that I didn't find a good way to break up and still keep it
readable. I added the () to #define MAX_IE_APPEND_SIZE (256 + 4).
I also moved som comments around after pointers from Pekka.
Signed-off-by: Lars Lindley <lindley@coyote.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the adis16255 driver to the build system under the staging directory.
It solves also most issues mentioned in TODO list:
- sample rate exported to sysfs
- spi_adis16255_bringup and spi_adis16255_shutdown encapsulated
- chip selftest in spi_adis16255_bringup
- kernel messages reduced to a reasonable number
I removed the TODO file, because ther was only the reset of the gyroscope left.
This is IMOH not necessary for the actual driver.
There are also some typos in adis.c file. This patch should get rid of them as well.
Signed-off-by: Matthias Brugger <mensch0815@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
dt3155v4l driver, as in -rc6-next-20100506 compiles, but will
not run properly due to recent changes in the videobuf APIs.
This patch synchronizes some functions that have been copied
from drivers/media/video/videobuf-dma-contig.c (and modified)
with the recent (-rc6 -> -rc6-next-) changes in videobuf layer
especially drivers/media/video/videobuf-dma-contig.c
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Checkpatch warnings about using externs in .c files were not resolved,
neither some long lines on deeply nested code.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix build errors. st_kim.c uses rfkill*() interfaces, so it
should depend on RFKILL.
st_kim.c:(.text+0x291b21): undefined reference to `rfkill_unregister'
st_kim.c:(.text+0x291b31): undefined reference to `rfkill_destroy'
st_kim.c:(.text+0x291d8a): undefined reference to `rfkill_alloc'
st_kim.c:(.text+0x291db9): undefined reference to `rfkill_init_sw_state'
st_kim.c:(.text+0x291dc9): undefined reference to `rfkill_register'
st_kim.c:(.text+0x291e07): undefined reference to `rfkill_unregister'
(.text+0x291e85): undefined reference to `rfkill_set_hw_state'
(.text+0x292072): undefined reference to `rfkill_set_hw_state'
(.text+0x2920e1): undefined reference to `rfkill_set_hw_state
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix build errors by including linux/semaphore.h:
drivers/staging/cxt1e1/pmcc4_private.h:144: error: field 'sr_sem_busy' has incomplete type
drivers/staging/cxt1e1/pmcc4_private.h:146: error: field 'sr_sem_wait' has incomplete type
drivers/staging/cxt1e1/pmcc4_private.h:189: error: field 'sem_wdbusy' has incomplete type
drivers/staging/cxt1e1/musycc.c:617: error: implicit declaration of function 'down'
drivers/staging/cxt1e1/musycc.c:641: error: implicit declaration of function 'up'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Documentation/CodingStyle sets a strongly prefered limit of 80
characters per line in "Chapter 2: Breaking long lines and strings".
Strings must be broken into smaller parts and long statements must be
rewritten.
Reported-by: Mikal Sande <mikal.sande@gmail.com>
Reported-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Trailing spaces at the end of a line or before a tab are against
Documentation/CodingStyle "3.1: Spaces" and should be avoided. It is
also common style to add a single space after commas unless it is
followed either by a newline or a tab.
Reported-by: Mikal Sande <mikal.sande@gmail.com>
Reported-by: Luis de Bethencourt <luisbg@ubuntu.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We must ensure that all pointer to a socket buffer are updated when we
copy a socket buffer and free our reference to the old one.
Another part of the kernel could also free its reference which maybe
removes the buffer completely. In that situation we would would feed
wrong information to the routing algorithm after the memory area is
written again by someone else.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As we always return that the we consumed the skb, we should also free the skb
in the case of an error.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch limits the queue lengths of batman and broadcast packets. BATMAN
packets are held back for aggregation and jittered to avoid interferences.
Broadcast packets are stored to be sent out multiple times to increase
the probability to be received by other nodes in lossy environments.
Especially in extreme cases like broadcast storms, the queues have been seen
to run full, eating up all the memory and triggering the infamous OOM killer.
With the queue length limits introduced in this patch, this problem is
avoided.
Each queue is limited to 256 entries for now, resulting in 1 MB of maximum
space available in total for typical setups (assuming one packet including
overhead does not require more than 2000 byte). This should also be reasonable
for smaller routers, otherwise the defines can be tweaked later.
This third version of the patch does not increase the local broadcast
sequence number when the queue is already full.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
BATMAN and broadcast packets are tracked with a sequence number window of
currently 64 entries to measure and avoid duplicates. Packets which have a
sequence number smaller than the newest received packet minus 64 are not
within this sequence number window anymore and are called "old packets"
from now on.
When old packets are received, the routing code assumes that the host of the
originator has been restarted. This assumption however might be wrong as
packets can also be delayed by NIC drivers, e.g. because of long queues or
collision detection in dense WiFi? environments. This behaviour can be
reproduced by doing a broadcast ping flood in a dense node environment.
The effect is that the sequence number window is jumping forth and back,
accepting and forwarding any packet (because packets are assumed to be "new")
and causing loops.
To overcome this problem, the sequence number handling has been reorganized.
When an old packet is received, the window is reset back only once. Other old
packets are dropped for (currently) 30 seconds to "protect" the new sequence
number and avoid the hopping as described above.
The reorganization brings some code cleanups (at least i hope you feel the
same) and also fixes a bug in count_real_packets() which falsely updated
the last_real_seqno for slightly older packets within the seqno window
if they are no duplicates.
This second version of the patch also fixes a problem where for seq_diff==64
bit_shift() reads from outside of the seqno window, and removes the loop
for seq_diff == -64 which was present in the first patch.
The third iteration also adds a window for the next expected sequence numbers.
This minimizes sequence number flapping for packets with very big differences
(e.g. 3 packets with seqno 0, 25000 and 50000 might still cause problems
without this window).
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes unnecessary whitespaces before a quoted
newline that the remaining batman-adv files had.
Reported-by: Luis de Bethencourt <luisbg@ubuntu.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of having a single /proc file "interfaces" in which you have
to echo the wanted interface batman-adv will create a subfolder in each
suitable /sys/class/net folder. This subfolder contains files for the
interface specific settings. For example, mesh_iface to add/remove an
interface from a virtual mesh network (at the moment only bat0 is
supported).
Example:
echo bat0 > /sys/class/net/eth0/batman-adv/mesh_iface
to deactivate:
echo none > /sys/class/net/eth0/batman-adv/mesh_iface
Interfaces which are not compatible with batman-adv won't contain the
batman-adv folder, therefore can't be activated. Not supported are:
loopback, non-ethernet, non-ARP and virtual mesh network interfaces
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first patch in a series of patches which aim to convert
all batman-adv /proc files to sysfs. To keep the changes in a
digestable size it has been split up into smaller chunks. During
the transition period batman-adv will use /proc as well as sysfs.
As a first step the following files have been converted:
aggregate_ogm, originators, transtable_global, transtable_local
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the 31 unnecessary whitespaces before a quoted
newline that the batman-adv files had.
Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com>
[sven.eckelmann@gmx.de: Redone to apply against current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The code here is testing to see if "i" is passed the end of the array.
The original code works probably, but it's not the cleanest way.
Andrew Lunn suggested that I also remove all the hard coded references
to 256 so I have done that as well.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We are now having a newer, more neutral vis output so that we won't have
to change the kernelmodule for adding support of new vis output formats.
This patch adds an explanation about this in the README file of
batman-adv and removes the description about the dot/json format (they
will be added to the README of batctl).
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Max address is not being used anywhere and just misleading, therefore
removing it. VIS_FORMAT string is now obsolete, so also remove it.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
So far, neighbour's secondary interface OGMs can involuntarily
piggyback on primary interface OGMs that arrived on the same secondary
interface before. Secondary interface OGMs should NEVER leave their
direct neighbour broadcast domain! This patch ensures that secondary
interface OGMs can only be aggregated to other secondary interface OGMs.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv aggregates routing packets to reduce the number of packets in
the air. Every outgoing packet is compared with other packets in the
buffer to determine whether it can be aggregated or not. Packets sent
at a lower interval can be held back longer to maximize the aggregation.
Due to insufficient checking batman-adv held back all packets for a
certain time depending on its own lowest interval rate which slowed
down all other nodes.
Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
"tcpdump" and "batctl td" will receive packets with a wrong sequence
number on systems with a different endianess than network byte order.
This happens due to the reordering of bytes in the function which
handles aggregated bat packets. The function which receives the bat
packets must ensure that these buffers aren't shared with anything else
before that function tries to write into it. Otherwise it has to copy
the buffers so it is save again to change them.
Reported-by: Kevin Steen <batman@kevinsteen.net>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If we haven't set the module to MODULE_ACTIVE state before (in general,
no interface has yet been added to batman-adv) then the hna table is not
initialised yet. If the kernel changes the mac address of the bat0
interface at this moment then an hna_local_add() called by interface_set_mac_addr()
then resulted in a null pointer derefernce. With this patch we are now
explicitly checking before if the state is MODULE_ACTIVE right now so
that we can assume having an initialised hna table.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
My wireless LAN module 'MelCo.,Inc. WLI-UC-G301N' works fine,
if the following line is added into 2870_main_dev.c.
Signed-off-by: Nobhiro KUSUNO <n-kusuno@fc4.so-net.ne.jp>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
rar_register driver uses PCI interfaces and PCI devices, so it
should depend on PCI.
Also format the Kconfig help text as normally done.
drivers/staging/rar_register/rar_register.c:623: error: implicit declaration of function 'pci_dev_get'
drivers/staging/rar_register/rar_register.c:623: warning: assignment makes pointer from integer without a cast
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patches fixes some of the long line lengths that checkpatch.pl was
complaining about in comedi.h
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes a long line length in comedidev.h to make checkpatch.pl happy
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to include log levels and fix some over length lines in
printk calls in drivers.c
Signed-off-by: Mark Rankilor <reodge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A semicolon is missing at the end of a statement, but it does compile
fine without it as the macro BCMLOG_ERR expands to a do {...} while (0);
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has sat in the staging directory since October of 2009, and no one
has stepped up to take it over, so odds are, no one cares about it
anymore. So, it is now deleted as scheduled, and documented in the TODO
file.
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The great renaming of the hv code is now complete.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
All of the uppercase .c files are now gone.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As the module only has one .c file in it, just name the file
the same as the desired module.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's a u64, so use a u64, it's not some special typedef.
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Time Sync feature synchronizes guest time to host UTC time after reboot,
and restore from saved/paused state.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the series of ASSERT removals, somehow we ended up with a compiler
warning in Channel.c. This patch fixes that up.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ASSERT is no longer used in hv, so remove the define
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
RingBufferInit() would always return sucess and instead relied on an
ASSERT() to test for an error condition. Remove the ASSERT() and
return -EINVAL instead. The return value of RingBufferInit() was also
never checked, so check it.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These ASSERT()s serve no purpose other than for debugging.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
VmbusChannelOpen() will now return -EINVAL if UserDataLen is too big.
Previously this was handled by an assert.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return value of VmbusChannelEstablishGpadl() was not examined in
Channel.c
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return value of osd_WaitEventCreate() was not examined in some
places.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The return value of osd_PageAlloc() was checked using an ASSERT().
Change that to more useful behaviour.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
kfree() knows how to deal with NULL, so there's no reason to check for
NULL before passing something to it.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Hank Janssen <hjanssen@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The prototypes of udelay() and msleep() are in linux/delay.h,
so include it.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remoted empty OUT define in ttype.h and its usage across the code.
Signed-off-by: Andres More <more.andres@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the arlan-main.c file that fixes the unnecessary whitespace
issues found by the checkpatch.pl tool.
Signed-off-by: Prashant P. Shah <pshah.mumbai@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Check kmalloc return value before use the buffer.
Signed-off-by: Zhitong Wang <zhitong.wangzt@alibaba-inc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the 8255.h file is being included properly, we were
using the incorrect function prototypes, which causes a build
warning now. This fixes it up and preserves the __iomem markings that
sparse wants to see.
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Mauro Carvalho Chehab
Maykel Moya
Chris Pascoe
Michel Ludwig
Mauro Carvalho Chehab
Christoph Fritz
Hank Janssen
Julia Lawall
Charles Clément
Javier Martinez Canillas
Soeren Moeller
Marin Mitov
Prashant P. Shah
Haiyang Zhang
Florian Schilhabel
Mark Rankilor
Alexander Kurz
Henk de Groot
Nitin Gupta
Andres More
Daniel Walker
Barry Song
Anand Gadiyar
Paul E. McKenney
K. Y. Srinivasan
David S. Miller
Morgan Gatti
Zachary Richey
Randy Dunlap
Larry Finger
Greg Kroah-Hartman
Takanori Suzuki
H Hartley Sweeten
Lars Lindley
Matthias Brugger
Jonathan Cameron
Christos Tzoumakis
Stephen Hemminger
Andrew Lunn
Sven Eckelmann
Simon Wunderlich
Marek Lindner
Luis de Bethencourt
Dan Carpenter
Linus Lüssing
Nobuhiro KUSUNO
Bill Pemberton
Peter Hüwe
wzt.wzt@gmail.com