This patch mainly fix some style warings matched with the new checkpatch
requirement. The warning as follows:
WARNING: function definition argument 'struct hns_roce_cq *' should also have
an identifier name
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The double not-operator is unncessary when used in a boolean context. This
patch removes them.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Omit extra messages for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Devesh Sharma <devesh.sharma@broadcom.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the function rxe_av_fill_ip_info, the parameter rxe is not used.
So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function rxe_av_fill_ip_info always returns 0. So the function
type is changed to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since the function rxe_av_to_attr always return 0, the function
type is changed to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function rxe_av_to_attr, the parameter rxe is
not used. So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function rxe_av_from_attr always return 0. So change the
function to void.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the function rxe_av_from_attr, the parameter rxe
is not used. So it is removed.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The nldev was implemented by following devlink implementation,
including SET/DEL/NEW commands. However these commands were not
implemented and hence don't need to be exposed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should return -ENOMEM if the allocation fails. (The current code
returns succees).
Fixes: 37cb11acf1 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If there is ever any error while creating srq->umem, we return that
error, we don't store it in srq->umem, so any check of srq->umem for
IS_ERR is pointless. Further, checking udata is unnecessary as
srq->umem is always either NULL or valid, without respect to udata.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJabj6pAAoJEHm+PkMAQRiGs8cIAJQFkCWnbz86e3vG4DuWhyA8
CMGHCQdUOxxFGa/ixhIiuetbC0x+JVHAjV2FwVYbAQfaZB3pfw2iR1ncQxpAP1AI
oLU9vBEqTmwKMPc9CM5rRfnLFWpGcGwUNzgPdxD5yYqGDtcM8K840mF6NdkYe5AN
xU8rv1wlcFPF4A5pvHCH0pvVmK4VxlVFk/2H67TFdxBs4PyJOnSBnf+bcGWgsKO6
hC8XIVtcKCH2GfFxt5d0Vgc5QXJEpX1zn2mtCa1MwYRjN2plgYfD84ha0xE7J0B0
oqV/wnjKXDsmrgVpncr3txd4+zKJFNkdNRE4eLAIupHo2XHTG4HvDJ5dBY2NhGU=
=sOml
-----END PGP SIGNATURE-----
Merge tag v4.15 of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
To resolve conflicts in:
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
From patches merged into the -rc cycle. The conflict resolution matches
what linux-next has been carrying.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Implement RDMA nldev netlink interface to get detailed information on each
QP in the system. This includes the owning process or kernel ULP and
detailed information from the qp_attrs.
Currently only the dumpit variant is implemented.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose through the netlink interface the global per-device utilization of
the supported object types.
Provide both dumpit and doit callbacks.
As an example of possible output from rdmatool for system with 5
mlx5 cards:
$ rdma res
1: mlx5_0: qp 4 cq 5 pd 3
2: mlx5_1: qp 4 cq 5 pd 3
3: mlx5_2: qp 4 cq 5 pd 3
4: mlx5_3: qp 2 cq 3 pd 2
5: mlx5_4: qp 4 cq 5 pd 3
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Track create and destroy operations of PD objects.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Track create and destroy operations of CQ objects.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Track create and destroy operations of QP objects.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The RDMA subsystem has very strict set of objects to work with, but it
completely lacks tracking facilities and has no visibility of resource
utilization.
The following patch adds such infrastructure to keep track of RDMA
resources to help with debugging of user space applications. The primary
user of this infrastructure is RDMA nldev netlink (following patches), to
be exposed to userspace via rdmatool, but it is not limited too that.
At this stage, the main three objects (PD, CQ and QP) are added, and more
will be added later.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The KBUILD_MODNAME variable contains the module name and it is known for
kernel users during compilation, so let's reuse it to track the owners.
Followup patches will store this for resource tracking.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Each of our modules only allocates a PD in one place, so there isn't any
loss in detail, while MODNAME is more useful and recognizable as something
to expose to the user.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The flags field the enum is used with comes directly from the uapi
so it belongs in the uapi headers for clarity and so userspace can
use it.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
NET_UDP_TUNNEL is not user selectable, so it should be used as a select
in kconfig.
CRYPTO_CRC32 is a required library for RDMA_RXE so it should active
automatically, as most other CRYPTO_ users do.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
qib_keys.c was left uncompilable in commit 7c2e11fe2d ("IB/qib: Remove qp and mr functionality from qib")
Since nothing need it, remove it from tree.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
mthca_user.h is unused since commit 486f60954c ("IB/mthca: Move user vendor structures")
Remove it from tree.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ndev will be initialized and held only for successful
ib_get_cached_gid(), otherwise it is garbage stack memory.
Calling dev_put() in failure path is wrong.
Fixes: 16c72e4028 ("IB/cm: Refactor to avoid setting path record software only fields")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When checking whatever the current netdev is the bond master interface,
use kernel API netif_is_bond_master() instead of hardcoding the check.
No functionality is changed.
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
SGID attributes are not used during OPA to IB GID conversion.
Therefore don't query it.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Failure in XRCD FW deallocation command leaves memory leaked and
returns error to the user which he can't do anything about it.
This patch changes behavior to always free memory and always return
success to the user.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The ib_write_umad() is protected by taking the umad file mutex.
However, it accesses file->port->ib_dev -- which is protected only by the
port's mutex (field file_mutex).
The ib_umad_remove_one() calls ib_umad_kill_port() which sets
port->ib_dev to NULL under the port mutex (NOT the file mutex).
It then sets the mad agent to "dead" under the umad file mutex.
This is a race condition -- because there is a window where
port->ib_dev is NULL, while the agent is not "dead".
As a result, we saw stack traces like:
[16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.678333] PGD 0 P4D 0
[16490.678404] Oops: 0000 [#1] SMP PTI
[16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat
(OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass
parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw]
[16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G OE 4.14.13-300.fc27.x86_64 #1
[16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000
[16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202
[16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000
[16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00
In the above trace, ib_umad_write is trying to dereference the NULL
file->port->ib_dev pointer.
Fix this by using the agent's device pointer (the device field
in struct ib_mad_agent) -- which IS protected by the umad file mutex.
Cc: <stable@vger.kernel.org> # v4.11
Fixes: 44c58487d5 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The script "checkpatch.pl" pointed information out like the following.
WARNING: quoted string split across lines
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The variable "tx_desc" will be set to an appropriate pointer a bit later.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Omit an extra message for a memory allocation failure in this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull x86 retpoline fixlet from Thomas Gleixner:
"Remove the ESP/RSP thunks for retpoline as they cannot ever work.
Get rid of them before they show up in a release"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Remove the esp/rsp thunk
Pull x86 fixes from Thomas Gleixner:
"A set of small fixes for 4.15:
- Fix vmapped stack synchronization on systems with 4-level paging
and a large amount of memory caused by a missing 5-level folding
which made the pgd synchronization logic to fail and causing double
faults.
- Add a missing sanity check in the vmalloc_fault() logic on 5-level
paging systems.
- Bring back protection against accessing a freed initrd in the
microcode loader which was lost by a wrong merge conflict
resolution.
- Extend the Broadwell micro code loading sanity check.
- Add a missing ENDPROC annotation in ftrace assembly code which
makes ORC unhappy.
- Prevent loading the AMD power module on !AMD platforms. The load
itself is uncritical, but an unload attempt results in a kernel
crash.
- Update Peter Anvins role in the MAINTAINERS file"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ftrace: Add one more ENDPROC annotation
x86: Mark hpa as a "Designated Reviewer" for the time being
x86/mm/64: Tighten up vmalloc_fault() sanity checks on 5-level kernels
x86/mm/64: Fix vmapped stack syncing on very-large-memory 4-level systems
x86/microcode: Fix again accessing initrd after having been freed
x86/microcode/intel: Extend BDW late-loading further with LLC size check
perf/x86/amd/power: Do not load AMD power module on !AMD platforms
Pull timer fix from Thomas Gleixner:
"A single fix for a ~10 years old problem which causes high resolution
timers to stop after a CPU unplug/plug cycle due to a stale flag in
the per CPU hrtimer base struct.
Paul McKenney was hunting this for about a year, but the heisenbug
nature made it resistant against debug attempts for quite some time"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimer: Reset hrtimer cpu base proper on CPU hotplug
Pull scheduler fix from Thomas Gleixner:
"A single bug fix to prevent a subtle deadlock in the scheduler core
code vs cpu hotplug"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix cpu.max vs. cpuhotplug deadlock
Pull perf fixes from Thomas Gleixner:
"Four patches which all address lock inversions and deadlocks in the
perf core code and the Intel debug store"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix perf,x86,cpuhp deadlock
perf/core: Fix ctx::mutex deadlock
perf/core: Fix another perf,trace,cpuhp lock inversion
perf/core: Fix lock inversion between perf,trace,cpuhp
Pull locking fixes from Thomas Gleixner:
"Two final locking fixes for 4.15:
- Repair the OWNER_DIED logic in the futex code which got wreckaged
with the recent fix for a subtle race condition.
- Prevent the hard lockup detector from triggering when dumping all
held locks in the system"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Avoid triggering hardlockup from debug_show_all_locks()
futex: Fix OWNER_DEAD fixup
When ORC support was added for the ftrace_64.S code, an ENDPROC
for function_hook() was missed. This results in the following warning:
arch/x86/kernel/ftrace_64.o: warning: objtool: .entry.text+0x0: unreachable instruction
Fixes: e2ac83d74a ("x86/ftrace: Fix ORC unwinding from ftrace handlers")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20180128022150.dqierscqmt3uwwsr@treble
The hrtimer interrupt code contains a hang detection and mitigation
mechanism, which prevents that a long delayed hrtimer interrupt causes a
continous retriggering of interrupts which prevent the system from making
progress. If a hang is detected then the timer hardware is programmed with
a certain delay into the future and a flag is set in the hrtimer cpu base
which prevents newly enqueued timers from reprogramming the timer hardware
prior to the chosen delay. The subsequent hrtimer interrupt after the delay
clears the flag and resumes normal operation.
If such a hang happens in the last hrtimer interrupt before a CPU is
unplugged then the hang_detected flag is set and stays that way when the
CPU is plugged in again. At that point the timer hardware is not armed and
it cannot be armed because the hang_detected flag is still active, so
nothing clears that flag. As a consequence the CPU does not receive hrtimer
interrupts and no timers expire on that CPU which results in RCU stalls and
other malfunctions.
Clear the flag along with some other less critical members of the hrtimer
cpu base to ensure starting from a clean state when a CPU is plugged in.
Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the
root cause of that hard to reproduce heisenbug. Once understood it's
trivial and certainly justifies a brown paperbag.
Fixes: 41d2e49493 ("hrtimer: Tune hrtimer_interrupt hang logic")
Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Sewior <bigeasy@linutronix.de>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanos
Due to some unfortunate events, I have not been directly involved in
the x86 kernel patch flow for a while now. I have also not been able
to ramp back up by now like I had hoped to, and after reviewing what I
will need to work on both internally at Intel and elsewhere in the near
term, it is clear that I am not going to be able to ramp back up until
late 2018 at the very earliest.
It is not acceptable to not recognize that this load is currently
taken by Ingo and Thomas without my direct participation, so I mark
myself as R: (designated reviewer) rather than M: (maintainer) until
further notice. This is in fact recognizing the de facto situation
for the past few years.
I have obviously no intention of going away, and I will do everything
within my power to improve Linux on x86 and x86 for Linux. This,
however, puts credit where it is due and reflects a change of focus.
This patch also removes stale entries for portions of the x86
architecture which have not been maintained separately from arch/x86
for a long time. If there is a reason to re-introduce them then that
can happen later.
Signed-off-by: H. Peter Anvin <h.peter.anvin@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bruce Schlobohm <bruce.schlobohm@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180125195934.5253-1-hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sorry to send something essentially as late as possible (Friday after an
rc9), but we managed to get a mailing list for the RISC-V Linux port.
We've been using patches@groups.riscv.org for a while, but that list has
some problems (it's Google Groups and it's shared over all RISC-V
software projects). The new infaread.org list is much better. We just
got it on Wednesday but I used it a bit on Thursday to shake out all the
configuration problems and it appears to be in working order.
When I updated the mailing list I noticed that the MAINTAINERS file was
pointing to our github repo, but now that we have a kernel.org repo I'd
like to point to that instead so I changed that as well. We'll be
centralizing all RISC-V Linux related development here as that seems to
be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given that
it's not a code change I was hoping it'd still be OK. It would be nice
to have the new mailing list and git repo in the release tarballs so
when people start to find bugs they'll get to the right place.
-----BEGIN PGP SIGNATURE-----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=zdWp
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V update from Palmer Dabbelt:
"RISC-V: We have a new mailing list and git repo!
Sorry to send something essentially as late as possible (Friday after
an rc9), but we managed to get a mailing list for the RISC-V Linux
port. We've been using patches@groups.riscv.org for a while, but that
list has some problems (it's Google Groups and it's shared over all
RISC-V software projects). The new infaread.org list is much better.
We just got it on Wednesday but I used it a bit on Thursday to shake
out all the configuration problems and it appears to be in working
order.
When I updated the mailing list I noticed that the MAINTAINERS file
was pointing to our github repo, but now that we have a kernel.org
repo I'd like to point to that instead so I changed that as well.
We'll be centralizing all RISC-V Linux related development here as
that seems to be the saner way to go about it.
I can understand if it's too late to get this into 4.15, but given
that it's not a code change I was hoping it'd still be OK. It would be
nice to have the new mailing list and git repo in the release tarballs
so when people start to find bugs they'll get to the right place"
* tag 'riscv-for-linus-4.15-maintainers' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
Update the RISC-V MAINTAINERS file
Pull networking fixes from David Miller:
1) The per-network-namespace loopback device, and thus its namespace,
can have its teardown deferred for a long time if a kernel created
TCP socket closes and the namespace is exiting meanwhile. The kernel
keeps trying to finish the close sequence until it times out (which
takes quite some time).
Fix this by forcing the socket closed in this situation, from Dan
Streetman.
2) Fix regression where we're trying to invoke the update_pmtu method
on route types (in this case metadata tunnel routes) that don't
implement the dst_ops method. Fix from Nicolas Dichtel.
3) Fix long standing memory corruption issues in r8169 driver by
performing the chip statistics DMA programming more correctly. From
Francois Romieu.
4) Handle local broadcast sends over VRF routes properly, from David
Ahern.
5) Don't refire the DCCP CCID2 timer endlessly, otherwise the socket
can never be released. From Alexey Kodanev.
6) Set poll flags properly in VSOCK protocol layer, from Stefan
Hajnoczi.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
VSOCK: set POLLOUT | POLLWRNORM for TCP_CLOSING
dccp: don't restart ccid2_hc_tx_rto_expire() if sk in closed state
net: vrf: Add support for sends to local broadcast address
r8169: fix memory corruption on retrieval of hardware statistics.
net: don't call update_pmtu unconditionally
net: tcp: close sock if net namespace is exiting
-----BEGIN PGP SIGNATURE-----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=r4NK
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A fairly urgent nouveau regression fix for broken irqs across
suspend/resume came in. This was broken before but a patch in 4.15 has
made it much more obviously broken and now s/r fails a lot more often.
The fix removes freeing the irq across s/r which never should have
been done anyways.
Also two vc4 fixes for a NULL deference and some misrendering /
flickering on screen"
* tag 'drm-fixes-for-v4.15-rc10-2' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: Move irq setup/teardown to pci ctor/dtor
drm/vc4: Fix NULL pointer dereference in vc4_save_hang_state()
drm/vc4: Flush the caches before the bin jobs, as well.
select(2) with wfds but no rfds must return when the socket is shut down
by the peer. This way userspace notices socket activity and gets -EPIPE
from the next write(2).
Currently select(2) does not return for virtio-vsock when a SEND+RCV
shutdown packet is received. This is because vsock_poll() only sets
POLLOUT | POLLWRNORM for TCP_CLOSE, not the TCP_CLOSING state that the
socket is in when the shutdown is received.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.
Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:
unregister_netdevice: waiting for bond0 to become free. Usage count = 148
Fixes: 2a91aa3967 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that we're upstream in Linux we've been able to make some
infrastructure changes so our port works a bit more like other ports.
Specifically:
* We now have a mailing list specific to the RISC-V Linux port, hosted
at lists.infreadead.org.
* We now have a kernel.org git tree where work on our port is
coordinated.
This patch changes the RISC-V maintainers entry to reflect these new
bits of infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
oulijun
Markus Elfring
Zhu Yanjun
Leon Romanovsky
Dan Carpenter
Doug Ledford
Jason Gunthorpe
Linus Torvalds
Corentin Labbe
Parav Pandit
Jack Morgenstein
Josh Poimboeuf
Thomas Gleixner
H. Peter Anvin
Stefan Hajnoczi
Alexey Kodanev
Palmer Dabbelt