OpenE2K/linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-omap2
History
Ajay Kumar Gupta fec3eebdce AM35x: Add missing GPIO mux config for EHCI port 
Adding GPIO mux config used for PHY reset of EHCI port on base board.
We get below failure message without this patch,

"hub 1-0:1.0: unable to enumerate USB device on port 1"

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:09 -08:00
..
include/mach
AM35xx: Introduce am35xx.h file
2010-02-15 10:03:35 -08:00
board-2430sdp.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-3430sdp.c
Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-02-23 19:22:48 -08:00
board-3630sdp.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-4430sdp.c
omap4: multi-omap: Allow build to work
2010-02-23 10:57:40 -08:00
board-am3517evm.c
AM35x: Add missing GPIO mux config for EHCI port
2010-02-25 14:45:09 -08:00
board-apollon.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-cm-t35.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-devkit8000.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-generic.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-h4.c
omap: convert boards to use physmap-flash
2010-02-15 10:03:32 -08:00
board-igep0020.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-ldp.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-n8x0.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-omap3beagle.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-omap3evm.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-omap3pandora.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-omap3touchbook.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-overo.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
board-rx51-peripherals.c
omap: RX51: Remux to pull eMMC lines down when powering off
2010-02-15 10:03:34 -08:00
board-rx51-sdram.c
omap3: rx51: Add SDRAM init
2009-11-22 10:24:33 -08:00
board-rx51.c
Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2010-02-23 19:22:48 -08:00
board-sdp-flash.c
omap3: SDP: Introducing 'board-sdp-flash.c' for flash init
2010-02-15 10:03:33 -08:00
board-zoom2.c
omap2/3/4: Fix omap2_map_common_io for multi-omap
2010-02-15 09:26:58 -08:00
board-zoom3.c
omap: zoom3: enable ehci support
2010-02-17 14:09:23 -08:00
board-zoom-debugboard.c
omap3: zoom: rename zoom2 name to generic zoom
2009-11-22 10:24:33 -08:00
board-zoom-peripherals.c
omap: musb: Pass board specific data from board file
2010-02-19 15:22:17 -08:00
clkt2xxx_apll.c
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clkt2xxx_dpllcore.c
OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c
2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c
OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c
2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c
OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c
2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c
OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c
2010-01-26 20:13:06 -07:00
clkt34xx_dpll3m2.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clkt_clksel.c
OMAP clock: drop RATE_FIXED clock flag
2010-02-24 12:29:43 -07:00
clkt_dpll.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
clock2xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock2xxx.h
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3xxx_data.c
OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630
2010-02-24 12:29:43 -07:00
clock3xxx.c
OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code
2010-02-24 17:45:15 -07:00
clock3xxx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock34xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock36xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock44xx_data.c
OMAP4: clock: Add dummy clock nodes for interface clocks
2010-02-24 17:45:17 -07:00
clock44xx.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock2420_data.c
OMAP clock: drop RATE_FIXED clock flag
2010-02-24 12:29:43 -07:00
clock2430_data.c
OMAP clock: drop RATE_FIXED clock flag
2010-02-24 12:29:43 -07:00
clock2430.c
OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files
2010-02-24 12:29:42 -07:00
clock3517.c
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock3517.h
OMAP3/4 clock: split into per-chip family files
2010-02-24 12:16:15 -07:00
clock_common_data.c
OMAP3 clock: convert clock34xx.h to clock34xx_data.c
2009-12-11 16:12:15 -07:00
clock.c
OMAP2+ clock: revise omap2_clk_{disable,enable}()
2010-02-24 17:45:16 -07:00
clock.h
OMAP4: clock: Add dummy clock nodes for interface clocks
2010-02-24 17:45:17 -07:00
clockdomain.c
OMAP2+ clock: revise omap2_clk_{disable,enable}()
2010-02-24 17:45:16 -07:00
clockdomains44xx.h
ARM: OMAP4 clock domains : Add the missing Clock Domain Structure
2010-01-26 20:12:58 -07:00
clockdomains.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
cm4xxx.c
omap: Fix 44xx compile
2009-09-24 16:23:07 -07:00
cm44xx.h
ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4
2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h
[ARM] OMAP2 PRCM: clean up CM_IDLEST bits
2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h
OMAP3 clock: add support for 192Mhz DPLL4M2 output
2010-02-24 12:15:03 -07:00
cm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
cm.c
OMAP clock/hwmod: fix off-by-one errors
2009-12-11 17:00:43 -07:00
cm.h
OMAP2/3 clock: Extend find_idlest() to pass back idle state value
2010-02-24 12:05:54 -07:00
control.c
omap2/3/4: ioremap omap_globals module
2010-02-23 10:57:40 -08:00
cpuidle34xx.c
OMAP3: cpuidle: Add valid field into C-state parameter passing
2010-02-23 11:05:02 -08:00
devices.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
dpll3xxx.c
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
2010-02-24 12:15:03 -07:00
emu.c
omap2/3: Fix initcalls for multi-omap
2010-02-15 09:27:05 -08:00
gpmc-nand.c
omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init
2010-02-15 10:03:33 -08:00
gpmc-onenand.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
gpmc-smc91x.c
omap: use smc91x_platdata to setup smc91x
2009-12-11 16:16:33 -08:00
gpmc.c
omap2/3/4: gpmc: kill compile warning
2010-02-15 10:03:33 -08:00
hsmmc.c
omap_hsmmc: Allow for a shared VccQ
2010-02-15 10:03:34 -08:00
hsmmc.h
omap_hsmmc: Allow for a shared VccQ
2010-02-15 10:03:34 -08:00
i2c.c
omap: i2c: Fix muxing for command line enabled bus
2010-02-25 14:45:08 -08:00
id.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
io.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
iommu2.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
irq.c
OMAP2/3: IRQ: ensure valid base address
2010-02-03 08:48:06 -08:00
Kconfig
Add minimal support for DevKit8000
2010-02-19 15:22:17 -08:00
mailbox.c
omap: mailbox: correct OMAP4 SIDLEMODE logic
2010-02-23 15:29:22 -08:00
Makefile
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
Makefile.boot
[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx
2005-11-10 14:26:51 +00:00
mcbsp.c
McBSP: OMAP3: Add sidetone feature
2010-02-23 10:57:39 -08:00
mux34xx.c
omap: Fix 3630 mux errors
2010-02-03 08:48:06 -08:00
mux34xx.h
omap: mux: Add 36xx CBP package support
2009-12-11 16:16:33 -08:00
mux.c
Merge branch 'omap-fixes-for-linus' into omap-for-linus
2010-02-17 14:08:58 -08:00
mux.h
omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3
2010-02-15 09:27:02 -08:00
omap3-iommu.c
omap: iommu: reorganize
2009-11-22 10:24:32 -08:00
omap_hwmod_3xxx_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_2420_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_2430_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap_hwmod.c
OMAP hwmod: add hwmod class support
2010-02-24 17:45:14 -07:00
omap-headsmp.S
OMAP4: AuxCoreBoot registers only accessible in secure mode
2009-12-11 16:16:35 -08:00
omap-smp.c
OMAP4: Remove the secondary wait loop
2009-12-11 16:16:35 -08:00
opp2xxx.h
omap2/3: Multiboot compile fixes to compile in omap2 and omap3
2010-02-15 09:26:55 -08:00
opp2420_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
opp2430_data.c
OMAP2xxx OPP: clean up comments in OPP data
2010-01-08 15:23:15 -07:00
pm24xx.c
OMAP clockdomains: add usecounting for wakeup and sleep dependencies
2010-01-26 20:13:01 -07:00
pm34xx.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
pm-debug.c
OMAP3 PM: Adding counters for power domain logic off and mem off during retention.
2010-02-24 12:05:50 -07:00
pm.h
OMAP3: cpuidle: Add valid field into C-state parameter passing
2010-02-23 11:05:02 -08:00
powerdomain.c
OMAP3 PM: Adding counters for power domain logic off and mem off during retention.
2010-02-24 12:05:50 -07:00
powerdomains24xx.h
omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2
2010-02-15 09:27:01 -08:00
powerdomains34xx.h
OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure
2010-02-24 12:05:50 -07:00
powerdomains44xx.h
ARM: OMAP4: PM: Add the Autogenerated OMAP4 specific power domain framework.
2010-01-26 20:12:52 -07:00
powerdomains.h
OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs
2010-01-29 10:14:23 -07:00
prcm-common.h
ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.
2010-01-26 20:12:51 -07:00
prcm.c
Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus
2010-02-24 20:53:03 -08:00
prm44xx.h
OMAP4: PRCM: Fix the base address for CHIRONSS reg defines
2010-01-20 13:35:27 -07:00
prm-regbits-24xx.h
ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains
2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h
OMAP3: PM: Enable IO-CHAIN wakeup
2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h
OMAP4: PRCM: Define shift macros as n instead of 1 << n
2010-01-29 10:14:22 -07:00
prm.h
ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.
2010-01-26 20:12:51 -07:00
sdram-hynix-h8mbx00u0mer-0em.h
omap3: zoom: Introduce zoom3 board support
2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h
omap3: SDRC: add timing data for Numonyx M65KxxxxAM
2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc2xxx.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sdrc.c
omap2/3/4: ioremap omap_globals module
2010-02-23 10:57:40 -08:00
sdrc.h
OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx*
2009-12-11 16:16:00 -07:00
serial.c
omap3/4: uart: fix full-fifo write abort
2010-02-23 10:57:40 -08:00
sleep24xx.S
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00
sleep34xx.S
OMAP3: PM: Added support for L2 aux ctrl register save and restore
2010-02-23 11:05:07 -08:00
sram34xx.S
OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig
2009-12-11 17:00:42 -07:00
sram242x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
sram243x.S
omap: Split OMAP2_IO_ADDRESS to L3 and L4
2009-10-19 15:25:31 -07:00
timer-gp.c
OMAP4: clock: Remove clock hacks from timer-gp.c
2010-02-24 17:45:17 -07:00
timer-mpu.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-ehci.c
omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions
2009-12-11 16:16:32 -08:00
usb-musb.c
omap4: Use irq line defines from irq-44xx.h
2010-02-23 15:29:08 -08:00
usb-tusb6010.c
omap: headers: Move remaining headers from include/mach to include/plat
2009-10-20 09:40:47 -07:00