..
akita.h
audio.h
bitfield.h
camera.h
[ARM] pxa: V4L2 soc_camera driver for PXA270
2008-04-19 17:14:30 +01:00
cm-x270.h
colibri.h
corgi.h
debug-macro.S
dma.h
entry-macro.S
[ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base
2008-02-29 22:47:23 +00:00
gpio.h
gpiolib support for the PXA architecture
2008-02-05 09:44:13 -08:00
gumstix.h
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards
2008-04-19 11:29:06 +01:00
hardware.h
i2c.h
idp.h
io.h
irda.h
[ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks
2008-04-19 11:29:08 +01:00
irqs.h
[ARM] 5013/1: Change ITE8152 interrupt numbers
2008-04-24 14:34:25 +01:00
littleton.h
lpd270.h
lubbock.h
magician.h
[ARM] 5009/1: magician: remove to-be-deprecated defines for pxa_gpio_mode
2008-04-21 12:47:49 +01:00
mainstone.h
memory.h
mfp-pxa2xx.h
[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}
2008-04-19 11:29:05 +01:00
mfp-pxa3xx.h
mfp-pxa25x.h
[ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x}
2008-04-19 11:29:04 +01:00
mfp-pxa27x.h
[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}
2008-04-19 11:29:05 +01:00
mfp-pxa300.h
mfp-pxa320.h
mfp.h
mmc.h
mtd-xip.h
ohci.h
pcm027.h
pcm990_baseboard.h
pm.h
[ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.
2008-05-04 11:06:05 +01:00
poodle.h
pxa2xx_spi.h
pxa2xx-gpio.h
[ARM] pxa: V4L2 soc_camera driver for PXA270
2008-04-19 17:14:30 +01:00
pxa2xx-regs.h
pxa3xx_nand.h
[MTD] [NAND] support for pxa3xx
2008-04-22 19:27:27 +01:00
pxa3xx-regs.h
[ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs
2008-04-19 11:29:02 +01:00
pxa27x_keypad.h
[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()
2008-04-19 11:29:05 +01:00
pxa-regs.h
pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}
2008-04-30 08:29:31 -07:00
pxafb.h
pxafb: preliminary smart panel interface support
2008-04-30 08:29:32 -07:00
regs-lcd.h
pxafb: preliminary smart panel interface support
2008-04-30 08:29:32 -07:00
regs-ssp.h
spi: pxa2xx_spi clock polarity fix
2008-02-23 17:12:14 -08:00
sharpsl.h
spitz.h
ssp.h
system.h
[ARM] 5014/1: Cleanup reset state before entering suspend or resetting.
2008-04-24 14:34:26 +01:00
timex.h
tosa.h
[ARM] 5002/1: tosa: add two more leds
2008-04-19 11:29:09 +01:00
trizeps4.h
udc.h
uncompress.h
vmalloc.h
zylonite.h
[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
2008-04-19 11:29:09 +01:00