Eric Miao 69bdea7047 [ARM] pxafb: allow insertion of delay to the smart panel command sequence ...

Some smart panel requires a delay between command sequences, while PXA
LCD controller didn't provide such one, let's emulate this by software.

A software delay marker can be inserted into the command sequence, once
pxafb_smart_queue() detects this, it flushes the previous commands and
delay for a specified number of milliseconds.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

2008-12-17 22:50:52 +08:00

..

include/mach

[ARM] pxafb: allow insertion of delay to the smart panel command sequence

2008-12-17 22:50:52 +08:00

am200epd.c

…

clock.c

[ARM] pxa: remove unnecessary #include of pxa2xx-gpio.h in clock.c

2008-12-02 14:42:39 +08:00

clock.h

…

cm-x2xx-pci.c

[ARM] 5282/1: pxa: add CM-X255 support

2008-10-07 12:05:07 +01:00

cm-x2xx-pci.h

[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255

2008-10-07 12:05:05 +01:00

cm-x2xx.c

[ARM] pxa: convert legacy LCD setup of other boards to new one

2008-12-17 22:45:30 +08:00

cm-x255.c

[ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support

2008-10-07 12:08:14 +01:00

cm-x270.c

[ARM] 5306/1: pxa: fix build error on CM-X270

2008-10-15 12:34:48 +01:00

cm-x300.c

[ARM] pxa: move I2C pin configurations out into board specific files

2008-12-02 14:42:40 +08:00

colibri.c

[ARM] pxa/colibri: convert to use new MFP API

2008-09-26 23:43:21 +01:00

corgi_lcd.c

[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig

2008-10-21 11:36:19 +08:00

corgi_pm.c

[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl

2008-10-29 11:45:37 +08:00

corgi_ssp.c

Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c"

2008-10-21 09:42:29 +08:00

corgi.c

[ARM] pxa/corgi: add physmap mapping for ROM

2008-12-02 14:43:49 +08:00

cpufreq-pxa2xx.c

[ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support

2008-12-02 14:43:47 +08:00

cpufreq-pxa3xx.c

cpufreq: remove policy->governor setting in drivers initialization

2008-10-15 16:42:47 -07:00

devices.c

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

devices.h

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

dma.c

…

e330.c

…

e350.c

…

e400.c

[ARM] pxa: convert legacy LCD setup of other boards to new one

2008-12-17 22:45:30 +08:00

e740.c

…

e750.c

…

e800.c

…

em-x270.c

[ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers

2008-10-07 19:12:57 +01:00

eseries.c

…

eseries.h

…

ezx.c

[ARM] pxa: move I2C pin configurations out into board specific files

2008-12-02 14:42:40 +08:00

generic.c

[ARM] ohci-pxa27x: use ioremap() and offset for register access

2008-10-07 19:12:58 +01:00

generic.h

[ARM] pxa: better MFP low power state support for pxa25x/pxa27x

2008-09-26 23:43:20 +01:00

gpio.c

[ARM] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c

2008-12-02 14:42:39 +08:00

gumstix.c

…

h5000.c

[ARM] pxa: add basic support for HP iPAQ h5000

2008-12-02 14:43:50 +08:00

idp.c

[ARM] pxa/idp: remove the unnecessary idp_init_irq()

2008-09-26 23:43:21 +01:00

irq.c

…

Kconfig

[ARM] pxa: add basic support for HP iPAQ h5000

2008-12-02 14:43:50 +08:00

leds-idp.c

…

leds-lubbock.c

…

leds-mainstone.c

…

leds.c

[ARM] 5251/1: remove old LED support for Trizeps4 SOM

2008-10-01 22:34:34 +01:00

leds.h

…

littleton.c

[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>

2008-12-02 14:42:37 +08:00

lpd270.c

[ARM] 5298/1: Drop desc_handle_irq()

2008-10-09 15:00:36 +01:00

lubbock.c

[ARM] 5298/1: Drop desc_handle_irq()

2008-10-09 15:00:36 +01:00

magician.c

[ARM] pxa: convert legacy LCD setup of other boards to new one

2008-12-17 22:45:30 +08:00

mainstone.c

[ARM] pxa: move I2C pin configurations out into board specific files

2008-12-02 14:42:40 +08:00

Makefile

[ARM] pxa: add basic support for HP iPAQ h5000

2008-12-02 14:43:50 +08:00

Makefile.boot

…

mfp-pxa2xx.c

[ARM] pxa: add support for additional GPIOs on PXA26x

2008-12-02 14:42:37 +08:00

mfp-pxa3xx.c

…

mioa701_bootresume.S

…

mioa701.c

[ARM] pxa/MioA701: improve power supply sources

2008-12-02 14:43:48 +08:00

mp900.c

[ARM] 5277/1: Add basic support for MobilePro 900/c

2008-10-02 22:56:05 +01:00

palmtx.c

[ARM] 5248/1: wm97xx generic battery driver

2008-10-02 22:48:34 +01:00

palmz72.c

[ARM] 5239/1: Palm Zire 72 power management support

2008-10-09 15:12:07 +01:00

pcm027.c

[ARM] pxa/pcm027: convert to use new MFP API

2008-09-26 23:43:22 +01:00

pcm990-baseboard.c

[ARM] pxa: convert legacy LCD setup of other boards to new one

2008-12-17 22:45:30 +08:00

pm.c

…

poodle.c

[ARM] pxa/poodle: add physmap mapping for ROM

2008-12-02 14:43:49 +08:00

pwm.c

[ARM] 5303/1: period_cycles should be greater than 1

2008-10-17 13:44:47 +01:00

pxa2xx.c

…

pxa3xx.c

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

pxa25x.c

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

pxa27x.c

[ARM] pxa: add resources for incoming rtc-pxa driver

2008-12-02 14:43:47 +08:00

pxa300.c

…

pxa320.c

…

pxa930.c

…

reset.c

[ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings

2008-11-17 14:05:41 +00:00

saar.c

…

sharpsl_pm.c

[ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig

2008-10-21 11:36:19 +08:00

sharpsl.h

…

sleep.S

…

smemc.c

…

spitz_pm.c

[ARM] corgi_lcd: fix simultaneous compilation with corgi_bl

2008-10-29 11:45:37 +08:00

spitz.c

[ARM] pxa/spitz: add physmap mapping for ROM

2008-12-02 14:43:49 +08:00

ssp.c

…

standby.S

…

tavorevb.c

…

time.c

Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

2008-10-11 10:09:45 -07:00

tosa-bt.c

…

tosa.c

[ARM] pxa/tosa: add physmap mapping for ROM

2008-12-02 14:43:49 +08:00

trizeps4.c

[ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c

2008-10-18 14:24:08 +01:00

viper.c

[ARM] 5308/1: Fix Viper ISA IRQ handling

2008-10-15 13:01:36 +01:00

zylonite_pxa300.c

[ARM] pxa/zylonite: add support for USB OHCI

2008-10-07 19:12:59 +01:00

zylonite_pxa320.c

[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>

2008-12-02 14:42:37 +08:00

zylonite.c

[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>

2008-12-02 14:42:37 +08:00