linux/arch/arm/boot/dts
Javier Martinez Canillas 9ad1df2b15 ARM: dts: omap3: Add support for IGEP COM Module
ISEE IGEP COM Module is an TI OMAP3 SoC computer on module.

This patch adds an initial device tree support to boot an
IGEP COM Module from the MMC/SD.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
[b-cousson@ti.com: Update the Makefile for 3.8-rc2]
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-04-09 00:16:46 +02:00
..
testcases
Makefile ARM: dts: omap3: Add support for IGEP COM Module 2013-04-09 00:16:46 +02:00
aks-cdu.dts
am33xx.dtsi ARM: dts: AM33XX: Rename I2C and GPIO nodes 2013-04-09 00:16:44 +02:00
am335x-bone.dts ARM: dts: AM33XX: Rename I2C and GPIO nodes 2013-04-09 00:16:44 +02:00
am335x-evm.dts ARM: dts: AM33XX: Rename I2C and GPIO nodes 2013-04-09 00:16:44 +02:00
am335x-evmsk.dts ARM: dts: AM33XX: Rename I2C and GPIO nodes 2013-04-09 00:16:44 +02:00
am3517-evm.dts
am3517_mt_ventoux.dts
animeo_ip.dts ARM: at91: Animeo IP: enable watchdog support 2013-02-07 16:40:07 +01:00
armada-370-db.dts arm: mvebu: Add SPI flash on Armada 370 DB board 2013-02-28 18:57:15 +01:00
armada-370-mirabox.dts arm: mvebu: Enable USB controllers on Armada 370/XP boards 2013-02-28 18:57:13 +01:00
armada-370-rd.dts arm: mvebu: enable the USB ports on Armada 370 Reference Design board 2013-03-08 21:44:30 +00:00
armada-370-xp.dtsi arm: mvebu: fix address-cells in mpic DT node 2013-03-08 22:15:54 +00:00
armada-370.dtsi arm: mvebu: Add support for USB host controllers in Armada 370/XP 2013-02-28 18:57:13 +01:00
armada-xp-db.dts arm: mvebu: Add SPI flash on Armada XP-DB board 2013-02-28 18:57:15 +01:00
armada-xp-gp.dts arm: mvebu: Add SPI flash on Armada XP-GP board 2013-02-28 18:57:14 +01:00
armada-xp-mv78230.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78260.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-mv78460.dtsi arm: mvebu: add pin muxing options for the SDIO interface on Armada XP 2013-02-28 18:57:09 +01:00
armada-xp-openblocks-ax3-4.dts arm: mvebu: Enable USB controllers on Armada 370/XP boards 2013-02-28 18:57:13 +01:00
armada-xp.dtsi arm: mvebu: Reduce reg-io-width with UARTs 2013-03-08 22:03:44 +00:00
at91rm9200.dtsi ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91rm9200ek.dts ARM: at91: add EMAC bindings to RM9200 DT 2013-02-07 16:40:09 +01:00
at91sam9g15.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g15ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g20.dtsi
at91sam9g20ek.dts
at91sam9g20ek_2mmc.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9g20ek_common.dtsi Sound updates for 3.8-rc1 2012-12-13 11:51:23 -08:00
at91sam9g25.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g45.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9m10g45ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9n12.dtsi arm-soc: device tree conversions 2013-02-21 15:38:49 -08:00
at91sam9n12ek.dts ARM: at91: at91sam9n12: add DT parameters to enable PMECC 2013-02-07 16:45:06 +01:00
at91sam9x5.dtsi ARM: at91: dt: at91sam9x5: complete NAND pinctrl 2013-03-13 10:25:24 +01:00
at91sam9x5cm.dtsi ARM: at91: at91sam9x5: add DT parameters to enable PMECC 2013-02-07 16:45:05 +01:00
at91sam9x5ek.dtsi ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9x25.dtsi ARM: at91sam9: add macb pinctrl support 2012-11-19 06:54:25 +08:00
at91sam9x25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9260.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
bcm2835-rpi-b.dts ARM: bcm2835: add I2C controllers to DT 2013-01-14 21:47:09 -07:00
bcm2835.dtsi ARM: bcm2835: fix I2C module clock rate 2013-03-04 17:15:34 -08:00
bcm11351-brt.dts Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
bcm11351.dtsi Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
ccu9540.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
cros5250-common.dtsi ARM: dts: correct the dw-mshc timing properties as per binding 2013-01-16 15:45:52 -08:00
da850-enbw-cmc.dts ARM: davinci: add support for am1808 based EnBW CMC board 2012-10-29 15:43:43 +05:30
da850-evm.dts ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
da850.dtsi ARM: davinci: da850: add wdt DT node 2013-02-09 22:38:26 +05:30
dbx5x0.dtsi mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
dove-cm-a510.dts
dove-cubox.dts ARM: Dove: add fixed regulator for CuBox USB power 2013-02-28 18:57:12 +01:00
dove-dove-db.dts
dove.dtsi ARM: Dove: add RTC device node 2013-03-08 21:53:33 +00:00
ea3250.dts
ecx-2000.dts ARM: dts: add device_type prop to cpu nodes on Calxeda platforms 2013-01-07 21:08:23 -08:00
ecx-common.dtsi ARM: dts: Add Calxeda ECX-2000 support 2012-10-31 13:46:17 -05:00
elpida_ecb240abacn.dtsi
emev2-kzm9d.dts ARM: mach-shmobile: kzm9d: update defconfig 2013-01-15 08:57:09 +09:00
emev2.dtsi ARM: mach-shmobile: emev2: Add reg and device_type properties to cpus 2013-01-29 11:44:59 +09:00
ethernut5.dts
evk-pro3.dts ARM: at91/dts: evk-pro3: enable watchdog 2012-11-16 15:48:48 +01:00
exynos4.dtsi ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 2013-03-07 10:33:07 +09:00
exynos4x12-pinctrl.dtsi ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl 2013-02-12 10:35:50 -08:00
exynos4x12.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4210-origen.dts ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen 2012-11-22 00:38:56 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Use drive strength 3 for SD pins for exynos4 2012-11-22 00:39:01 +09:00
exynos4210-smdkv310.dts ARM: dts: use uart port1 for console on exynos4210-smdkv310 2012-12-28 09:35:35 -08:00
exynos4210-trats.dts ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats 2012-11-20 20:17:20 +09:00
exynos4210.dtsi ARM: dts: fix compatible value for exynos pinctrl 2013-01-28 14:27:50 -08:00
exynos4212.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos4412-smdk4412.dts ARM: dts: add board dts file for EXYNOS4412 based SMDK board 2012-11-07 09:12:10 +09:00
exynos4412.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos5250-smdk5250.dts MMC highlights for 3.9: 2013-02-26 09:31:09 -08:00
exynos5250-snow.dts ARM: dts: Add board dts file for Snow board (ARM Chromebook) 2012-11-21 13:32:21 +09:00
exynos5250.dtsi Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma 2013-02-26 09:24:48 -08:00
exynos5440-ssdk5440.dts ARM: dts: use uart port0 for console on exynos5440-ssdk5440 2012-12-28 09:35:14 -08:00
exynos5440.dtsi ARM: EXYNOS: Add #dma-cells for generic dma binding support for PL330 2013-03-07 10:33:07 +09:00
ge863-pro3.dtsi
highbank.dts cpufreq / highbank: add support for highbank cpufreq 2013-02-02 00:01:15 +01:00
href.dtsi mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
hrefprev60.dts ARM: ux500: Move board specific GPIO info out to subordinate DTS files 2012-11-27 10:58:27 +00:00
hrefv60plus.dts mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
imx6dl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-arm2.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabreauto.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabrelite.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q-sabresd.dts ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6q.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx6qdl.dtsi ARM: dts: add dtsi for imx6q and imx6dl 2013-02-10 23:25:47 +08:00
imx23-evk.dts
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: Fix IOMUX settings 2012-12-25 22:17:59 +08:00
imx23-stmp378x_devb.dts
imx23.dtsi ARM: mxs: Add OF props for MX23 LRADC 2013-01-26 10:07:54 +00:00
imx25-karo-tx25.dts ARM: dts: imx25-karo-tx25: Put status entry in the end 2013-02-10 23:25:43 +08:00
imx25-pdk.dts ARM: mx25pdk: Add device tree support 2013-02-10 23:25:42 +08:00
imx25.dtsi ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-apf27.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-pdk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-phytec-phycore.dts ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx27.dtsi ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx28-apf28.dts ARM: mxs: Add support for the Armadeus Systems APF28 module 2012-10-19 16:45:20 +08:00
imx28-apf28dev.dts ARM: mxs: apf28dev: Add I2C and SPI support 2012-11-12 10:07:43 +08:00
imx28-apx4devkit.dts
imx28-cfa10036.dts ARM: dts: mxs: add oled support for the cfa-10036 2012-11-22 09:03:40 +08:00
imx28-cfa10037.dts ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support 2013-01-26 13:40:37 +08:00
imx28-cfa10049.dts ARM: mxs: dts: Add rotary encoder to the CFA-10049 2013-01-31 22:31:19 +08:00
imx28-evk.dts ARM: dts: imx28-evk: Use pinctrl for gpio-led 2012-10-15 10:51:48 +08:00
imx28-m28evk.dts ARM: mxs: Enable touchscreen on m28evk 2013-01-14 08:47:51 +08:00
imx28-sps1.dts ARM: mxs: Add SchulerControl SPS1 DTS file 2012-11-20 22:09:05 +08:00
imx28-tx28.dts
imx28.dtsi ARM: dts: mxs: Add muxing options for the third PWM 2013-01-29 18:23:18 +08:00
imx31-bug.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx31.dtsi ARM: mx31: Replace clk_register_clkdev with clock DT lookup 2013-01-25 11:12:37 +01:00
imx51-apf51.dts ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx51-babbage.dts ARM i.MX51 babbage: Add keypad support 2013-02-10 23:25:43 +08:00
imx51.dtsi ARM: dts: Add apf51 basic support 2013-02-10 23:25:45 +08:00
imx53-ard.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-evk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-mba53.dts ARM: dts: imx53-mba53: fix fsl,pins for disp1-grp1 2013-03-04 09:20:15 +08:00
imx53-qsb.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-smd.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-tqma53.dtsi ARM i.MX53: add dts for the TQ tqma53 module 2013-02-10 23:25:44 +08:00
imx53.dtsi ARM: dts: Add device tree entry for onewire master on i.MX53 2013-02-10 23:25:47 +08:00
integrator.dtsi
integratorap.dts ARM: integrator: hook the AP into the SoC bus 2012-11-16 22:25:50 +01:00
integratorcp.dts ARM: integrator: hook the CP into the SoC bus 2012-11-16 22:26:07 +01:00
kirkwood-98dx4122.dtsi ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl 2012-11-24 02:58:43 +00:00
kirkwood-6281.dtsi ARM: kirkwood: Convert mplcec4 board to pinctrl 2012-11-24 02:58:52 +00:00
kirkwood-6282.dtsi ARM: Kirkwood: Add pinctrl of NAND to 88f6282 2013-02-28 18:57:11 +01:00
kirkwood-dns320.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dns325.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dnskw.dtsi ARM: Kirkwood: Convert dnskw to pinctrl 2012-11-24 02:57:56 +00:00
kirkwood-dockstar.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-dreamplug.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-goflexnet.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-guruplug-server-plus.dts ARM: kirkwood: convert Guruplug Server Plus to use the device tree 2013-02-28 18:57:07 +01:00
kirkwood-ib62x0.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-iconnect.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-iomega_ix2_200.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-is2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-km_kirkwood.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lschlv2.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lsxhl.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-lsxl.dtsi ARM: Kirkwood: Convert lsxl boards to pinctrl. 2012-11-24 02:58:30 +00:00
kirkwood-mplcec4.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ns2-common.dtsi ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ns2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2lite.dts ARM: kirkwood: DT board setup for Network Space Lite v2 2012-11-21 20:58:43 +00:00
kirkwood-ns2max.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2mini.dts ARM: kirkwood: DT board setup for Network Space Mini v2 2012-11-21 20:58:49 +00:00
kirkwood-nsa310.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-openblocks_a6.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-topkick.dts ARM: kirkwood: of_serial: fix clock gating by removing clock-frequency 2013-03-08 21:32:52 +00:00
kirkwood-ts219-6281.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219-6282.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219.dtsi
kirkwood.dtsi rtc: rtc-mv: Add support for clk to avoid lockups 2013-03-08 21:34:41 +00:00
kizbox.dts ARM: at91/dts: add macb mii pinctrl config for kizbox 2013-01-23 10:34:38 +01:00
lpc32xx.dtsi ARM: LPC32xx: Add the motor PWM to base dts file 2012-11-14 15:41:18 +01:00
marco-evb.dts ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
marco.dtsi ARM: PRIMA2: add CSR SiRFmarco device tree .dts 2013-01-22 19:33:30 +08:00
mmp2-brownstone.dts mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
mmp2.dtsi mfd: max8925: Add dts 2013-02-14 00:23:01 +01:00
msm8660-surf.dts
msm8960-cdp.dts
omap2.dtsi ARM: dts: OMAP: Add timer nodes 2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-beagle.dts ARM: dts: omap3-beagle: Add USB Host support 2013-04-02 10:00:04 -07:00
omap3-evm.dts
omap3-igep.dtsi ARM: dts: omap3: Add generic DT support for IGEP devices 2013-04-09 00:16:44 +02:00
omap3-igep0020.dts ARM: dts: omap3: Add support for IGEPv2 board 2013-04-09 00:16:45 +02:00
omap3-igep0030.dts ARM: dts: omap3: Add support for IGEP COM Module 2013-04-09 00:16:46 +02:00
omap3-overo.dtsi
omap3-tobi.dts
omap3.dtsi ARM: dts: OMAP3: Add HS USB Host IP nodes 2013-04-02 10:00:03 -07:00
omap4-panda-a4.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda-es.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-sdp.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-var-som.dts ARM: dts: OMAP: Rename pandaES and var_som for consistency 2012-10-29 16:56:35 +01:00
omap4.dtsi ARM: dts: OMAP4: Add HS USB Host IP nodes 2013-04-02 10:00:02 -07:00
omap5-evm.dts ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
omap5.dtsi ARM: dts: omap5: EMIF device tree data for OMAP5 boards 2012-11-05 18:38:03 +01:00
omap36xx.dtsi
omap2420-h4.dts ARM: dts: OMAP2420: Correct H4 board memory size 2012-12-14 14:49:53 -08:00
omap2420.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap2430.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
orion5x-lacie-ethernet-disk-mini-v2.dts arm: mach-orion5x: fix typo in compatible string of a .dts file 2013-03-08 22:19:42 +00:00
orion5x.dtsi arm: orion5x: basic Device Tree support 2012-11-21 21:00:45 +00:00
phy3250.dts
picoxcell-pc3x2.dtsi
picoxcell-pc3x3.dtsi
picoxcell-pc7302-pc3x2.dts
picoxcell-pc7302-pc3x3.dts
pm9g45.dts ARM: at91: pm9g45: add mmc support 2012-11-20 01:10:28 +08:00
prima2-evb.dts
prima2.dtsi clk: prima2: enable dt-binding clkdev mapping 2013-01-18 09:44:01 -08:00
pxa2xx.dtsi
pxa3xx.dtsi
pxa27x.dtsi
pxa168-aspenite.dts
pxa168.dtsi
pxa910-dkb.dts
pxa910.dtsi
r8a7740-armadillo800eva.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
r8a7740.dtsi
samsung_k3pe0e000b.dtsi ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh73a0-reference.dtsi ARM: mach-shmobile: sh73a0: Initialise MMCIF using DT 2013-01-25 12:43:49 +09:00
sh73a0.dtsi ARM: mach-shmobile: sh73a0: Add reg and device_type properties to cpus 2013-01-29 11:44:54 +09:00
sh7372-mackerel.dts Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards 2013-01-29 09:02:47 -08:00
sh7372.dtsi
skeleton.dtsi
snowball.dts mfd: ab8500: Kill "reg" property from binding 2013-03-12 09:39:01 +01:00
socfpga.dtsi Arm: socfpga: pl330: Add #dma-cells for generic dma binding support 2013-03-11 22:01:57 +01:00
socfpga_cyclone5.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
socfpga_vt.dts arm: socfpga: Add SMP support for actual socfpga harware 2013-02-11 19:37:26 -08:00
spear3xx.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear13xx.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
spear300-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear300.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear310-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear310.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear320-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear320-hmi.dts ARM: SPEAr320: DT: Add SPEAr 320 HMI board support 2012-11-26 16:55:33 +05:30
spear320.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear600-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear600.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear1310-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1310.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340.dtsi Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" 2013-02-20 15:48:02 +05:30
ste-nomadik-s8815.dts ARM: nomadik: migrate MMC/SD card support to device tree 2013-01-28 23:24:40 +01:00
ste-nomadik-stn8815.dtsi ARM: nomadik: add I2C devices to the device tree 2013-01-28 23:24:41 +01:00
stuib.dtsi ARM: ux500: Change the type of interrupt to something compatible 2012-11-01 13:02:26 +01:00
sun4i-a10-cubieboard.dts Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" 2013-02-19 22:27:28 +01:00
sun4i-a10-hackberry.dts ARM: sunxi: Add device tree for Miniand Hackberry 2013-01-08 19:46:19 +01:00
sun4i-a10.dtsi ARM: sunxi: Add the pin groups for UART0 and UART1 on sun4i 2013-02-01 10:48:11 +01:00
sun5i-a13-olinuxino.dts Revert "sunxi: a13-olinuxino: Add user LED to the device tree" 2013-02-19 22:26:42 +01:00
sun5i-a13.dtsi ARM: sunxi: Add uart1 pinctrl groups 2013-01-22 13:51:37 +01:00
sunxi.dtsi ARM: sunxi: Use the Synosys APB UART instead of ns8250 2013-01-16 19:13:18 +01:00
tegra20-colibri-512.dtsi ARM: tegra: Add Colibri T20 512MB COM device tree 2013-01-28 11:24:09 -07:00
tegra20-harmony.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-iris-512.dts ARM: tegra: Add Toradex Iris carrier board DT with T20 512MB COM 2013-01-28 11:24:09 -07:00
tegra20-medcom-wide.dts
tegra20-paz00.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-plutux.dts ARM: tegra: plutux: Enable HDMI output 2012-11-16 09:17:08 -07:00
tegra20-seaboard.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-tamonten.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20-tec.dts ARM: tegra: tec: Enable HDMI output 2012-11-16 09:17:09 -07:00
tegra20-trimslice.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-ventana.dts ARM: tegra: device tree updates 2013-02-05 13:19:11 -08:00
tegra20-whistler.dts ARM: tegra: move serial clock-frequency attr into the Tegra20 dtsi 2013-01-28 11:24:09 -07:00
tegra20.dtsi ARM: tegra: fix register address of slink controller 2013-03-22 21:30:16 +01:00
tegra30-beaver.dts ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30-cardhu-a02.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu-a04.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu.dtsi ARM: tegra: move serial clock-frequency attr into the Tegra30 dtsi 2013-01-28 11:24:09 -07:00
tegra30.dtsi ARM: tegra: fix register address of slink controller 2013-03-22 21:30:16 +01:00
tegra114-dalmore.dts ARM: dt: tegra114: Add new board, Dalmore 2013-01-28 11:23:08 -07:00
tegra114-pluto.dts ARM: dt: tegra114: Add new board, Pluto 2013-01-28 11:23:11 -07:00
tegra114.dtsi ARM: DT: tegra114: add pinmux DT entry 2013-01-29 11:02:15 -07:00
tny_a9g20.dts
tny_a9260.dts
tny_a9260_common.dtsi
tny_a9263.dts
tps65217.dtsi
tps65910.dtsi
twl4030.dtsi watchdog: twl4030_wdt: add DT support 2013-01-02 12:07:05 +01:00
twl6030.dtsi ARM: dts: Add twl6030-usb data 2012-10-29 16:56:29 +01:00
u9540.dts ARM: ux500: Enable all MMC devices on the u9540 when booting with DT 2012-11-20 16:10:46 +00:00
usb_a9g20-dab-mmx.dtsi
usb_a9g20.dts
usb_a9260.dts
usb_a9260_common.dtsi
usb_a9263.dts
versatile-ab.dts
versatile-pb.dts
vexpress-v2m-rs1.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2m.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca5s.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca9.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vexpress-v2p-ca15_a7.dts ARM: vexpress: Fix wdt interrupt in ca15{-tc1,_a7} dts 2013-01-29 18:20:28 +00:00
vt8500-bv07.dts
vt8500.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8505-ref.dts
wm8505.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8650-mid.dts
wm8650.dtsi serial: vt8500: UART uses gated clock rather than 24Mhz reference 2013-01-17 18:54:32 -08:00
wm8850-w70v2.dts dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
wm8850.dtsi dts: vt8500: Add initial dts support for WM8850 2013-01-21 23:20:08 -08:00
xenvm-4.2.dts
zynq-7000.dtsi serial: xilinx_uartps: Get clock rate info from dts 2013-01-21 13:56:46 -08:00
zynq-zc702.dts ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00