..
Kconfig
[ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards
2008-04-19 11:29:06 +01:00
Makefile
[ARM] 5033/1: Unbreak corgi_ssp by registering ssp drivers earlier.
2008-05-09 21:25:37 +01:00
Makefile.boot
…
akita-ioexp.c
i2c: normal_i2c can be made const (remaining drivers)
2008-01-27 18:14:47 +01:00
clock.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
clock.h
…
cm-x270-pci.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
cm-x270-pci.h
…
cm-x270.c
[ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisation
2008-06-02 13:40:19 +01:00
colibri.c
[ARM] colibri: fix support for DM9000 ethernet device
2008-05-17 22:55:17 +01:00
corgi.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
corgi_lcd.c
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
2008-01-28 13:13:25 +00:00
corgi_pm.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
corgi_ssp.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
cpu-pxa.c
[ARM] 5032/1: Added cpufreq support for pxa27x CPU
2008-05-07 21:47:40 +01:00
devices.c
[ARM] pxa: V4L2 soc_camera driver for PXA270
2008-04-19 17:14:30 +01:00
devices.h
[ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info()
2008-04-19 11:29:05 +01:00
dma.c
[ARM] replace remaining __FUNCTION__ occurrences
2008-03-06 12:18:18 +00:00
em-x270.c
[ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisation
2008-06-02 13:40:21 +01:00
eseries.c
[ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs.
2008-01-28 13:13:13 +00:00
generic.c
pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}
2008-04-30 08:29:31 -07:00
generic.h
[ARM] pxa: move ARRAY_AND_SIZE definition to generic.h
2008-04-19 11:29:04 +01:00
gpio.c
[ARM] 5003/1: Shut up sparse warnings
2008-04-19 11:29:09 +01:00
gumstix.c
[ARM] 5006/1: Gumstix GPIO header fixup and defconfig fixup
2008-04-21 12:47:46 +01:00
idp.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
irq.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
leds-idp.c
…
leds-lubbock.c
…
leds-mainstone.c
…
leds-trizeps4.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
leds.c
…
leds.h
…
littleton.c
pxafb: make lubbock/mainstone/zylonite/littleton to use new LCD connection type
2008-04-30 08:29:31 -07:00
lpd270.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
lubbock.c
[ARM] lubbock: fix compilation
2008-05-08 10:58:39 +01:00
magician.c
[ARM] 5020/1: magician: remove __devinit marker from pasic3_leds_info
2008-04-24 21:55:59 +01:00
mainstone.c
pxafb: make lubbock/mainstone/zylonite/littleton to use new LCD connection type
2008-04-30 08:29:31 -07:00
mfp-pxa2xx.c
[ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x}
2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/juhl/trivial
2008-04-21 16:36:46 -07:00
pcm027.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
pcm990-baseboard.c
i2c: Convert most new-style drivers to use module aliasing
2008-04-29 23:11:40 +02:00
pm.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
poodle.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
pxa3xx.c
[ARM] 5027/1: Fixed random memory corruption on pxa suspend cycle.
2008-05-04 11:06:05 +01:00
pxa25x.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
pxa27x.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
pxa300.c
[ARM] 4635/1: pxa: Change Eric Miao's email address to eric.miao@marvell.com
2007-10-31 15:21:48 +00:00
pxa320.c
[ARM] 4675/1: pxa: fix mfp address definition error for pxa320
2007-11-29 20:52:54 +00:00
sharpsl.h
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
2008-01-28 13:13:25 +00:00
sharpsl_pm.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
sleep.S
[ARM] pxa: add preliminary suspend/resume code for pxa3xx
2008-02-04 13:17:33 +00:00
smemc.c
[ARM] pxa: introduce sysdev for pxa3xx static memory controller
2008-02-04 13:17:33 +00:00
spitz.c
Revert "[ARM] pxa: spitz wants PXA27x UDC definitions"
2008-05-23 13:53:31 +01:00
spitz_pm.c
[ARM] pxa: Fix RCSR handling
2008-05-08 18:04:02 +01:00
ssp.c
[ARM] 5077/1: spi: fix list scan success verification in PXA ssp driver
2008-06-11 23:38:46 +01:00
standby.S
[ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme
2008-01-26 15:07:56 +00:00
time.c
[ARM] pxa: fix PXA27x resume
2008-01-26 15:07:57 +00:00
tosa.c
[ARM] pxa: fix tosa.c build error
2008-06-02 20:38:15 +01:00
trizeps4.c
[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h
2008-04-19 11:29:04 +01:00
zylonite.c
pxafb: make lubbock/mainstone/zylonite/littleton to use new LCD connection type
2008-04-30 08:29:31 -07:00
zylonite_pxa300.c
[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
2008-04-19 11:29:09 +01:00
zylonite_pxa320.c
[ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line
2008-04-19 11:29:09 +01:00
a4aff22337