OpenE2K
/
linux
6
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
linux/arch/arm/mach-pxa
History
Jonathan Cameron b6795fa9fd [ARM] pxa: initial support for the Imote2 platform 
Changes made as suggested by Eric Miao (including fix to map_io
silly mistake!).

Originally designed by Intel, now sold by Crossbow (www.xbow.com).

Very little actually on board. The patch includes sensors and
similar as found on commonly occurring daughter boards.

Some of the drivers are not in mainline as yet as they are either
part of the IIO subsystem or need a lot of work before submission.
What is the position wrt to putting them in i2c board configs etc?

Support for these boards has been maintained outside the kernel
for a long time, but now that there is a good da9030 pmic driver
available the last major hurdle no longer exists.

All comments welcomed.

The Imote2's big brother (stargate2) will follow once any problems
with this one have been cleaned up and a few bits and bobs have
been added to the da903x driver. Hopefully the cc2420 driver will
get cleaned up and submitted in the not too distant future as
well.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
 		2008-12-17 22:51:39 +08:00
..
include/mach [ARM] pxa: initial support for the Imote2 platform 2008-12-17 22:51:39 +08:00
Kconfig [ARM] pxa: initial support for the Imote2 platform 2008-12-17 22:51:39 +08:00
Makefile [ARM] pxa: initial support for the Imote2 platform 2008-12-17 22:51:39 +08:00
Makefile.boot
…
am200epd.c [ARM] pxa/gumstix: fix incorrect init done by am200 2008-12-17 22:51:38 +08:00
clock.c [ARM] pxa: remove unnecessary #include of pxa2xx-gpio.h in clock.c 2008-12-02 14:42:39 +08:00
clock.h [ARM] clocklib: Allow dynamic alias creation 2008-08-12 12:54:30 +01:00
cm-x2xx-pci.c [ARM] 5282/1: pxa: add CM-X255 support 2008-10-07 12:05:07 +01:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] pxa: convert legacy LCD setup of other boards to new one 2008-12-17 22:45:30 +08:00
cm-x255.c [ARM] 5284/1: pxa: cm-x255: add NOR and NAND flash support 2008-10-07 12:08:14 +01:00
cm-x270.c [ARM] 5306/1: pxa: fix build error on CM-X270 2008-10-15 12:34:48 +01:00
cm-x300.c [ARM] pxa: move I2C pin configurations out into board specific files 2008-12-02 14:42:40 +08:00
colibri.c [ARM] pxa/colibri: convert to use new MFP API 2008-09-26 23:43:21 +01:00
corgi.c [ARM] pxa/corgi: add physmap mapping for ROM 2008-12-02 14:43:49 +08:00
corgi_lcd.c [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig 2008-10-21 11:36:19 +08:00
corgi_pm.c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl 2008-10-29 11:45:37 +08:00
corgi_ssp.c Revert "[ARM] pxa/corgi: remove now unused corgi_ssp.c and corgi_lcd.c" 2008-10-21 09:42:29 +08:00
cpufreq-pxa2xx.c [ARM] pxa: cpufreq-pxa2xx: sdram_rows detection support 2008-12-02 14:43:47 +08:00
cpufreq-pxa3xx.c cpufreq: remove policy->governor setting in drivers initialization 2008-10-15 16:42:47 -07:00
devices.c [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
devices.h [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
dma.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
e330.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
e350.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
e400.c [ARM] pxa: convert legacy LCD setup of other boards to new one 2008-12-17 22:45:30 +08:00
e740.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
e750.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
e800.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
em-x270.c [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers 2008-10-07 19:12:57 +01:00
eseries.c [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
eseries.h [ARM] eseries: move UDC defs to machine files 2008-08-19 13:44:07 +01:00
ezx.c [ARM] pxa/ezx: I2C configuration 2008-12-17 22:51:39 +08:00
generic.c [ARM] ohci-pxa27x: use ioremap() and offset for register access 2008-10-07 19:12:58 +01:00
generic.h [ARM] pxa: better MFP low power state support for pxa25x/pxa27x 2008-09-26 23:43:20 +01:00
gpio.c [ARM] pxa: move GPIOx_BASE and GPIO register offsets to gpio.c 2008-12-02 14:42:39 +08:00
gumstix.c [ARM] pxa/gumstix: fix incorrect init done by am200 2008-12-17 22:51:38 +08:00
h5000.c [ARM] pxa: add basic support for HP iPAQ h5000 2008-12-02 14:43:50 +08:00
idp.c [ARM] pxa/idp: remove the unnecessary idp_init_irq() 2008-09-26 23:43:21 +01:00
imote2.c [ARM] pxa: initial support for the Imote2 platform 2008-12-17 22:51:39 +08:00
irq.c [ARM] 5233/1: Allow PXA to have ISA IRQs numbered 0-15 2008-09-01 17:13:26 +01:00
leds-idp.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
leds-lubbock.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
leds-mainstone.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
leds.c [ARM] 5251/1: remove old LED support for Trizeps4 SOM 2008-10-01 22:34:34 +01:00
leds.h
…
littleton.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
lpd270.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
lubbock.c [ARM] 5298/1: Drop desc_handle_irq() 2008-10-09 15:00:36 +01:00
magician.c [ARM] pxa: convert legacy LCD setup of other boards to new one 2008-12-17 22:45:30 +08:00
mainstone.c [ARM] pxa: move I2C pin configurations out into board specific files 2008-12-02 14:42:40 +08:00
mfp-pxa2xx.c [ARM] pxa: add support for additional GPIOs on PXA26x 2008-12-02 14:42:37 +08:00
mfp-pxa3xx.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
mioa701.c [ARM] pxa/MioA701: improve power supply sources 2008-12-02 14:43:48 +08:00
mioa701_bootresume.S [ARM] 5202/1: pxa: Added Mitac Mio A701 smartphone support. 2008-08-26 17:01:37 +01:00
mp900.c [ARM] 5277/1: Add basic support for MobilePro 900/c 2008-10-02 22:56:05 +01:00
palmtx.c [ARM] 5248/1: wm97xx generic battery driver 2008-10-02 22:48:34 +01:00
palmz72.c [ARM] 5239/1: Palm Zire 72 power management support 2008-10-09 15:12:07 +01:00
pcm027.c [ARM] pxa/pcm027: convert to use new MFP API 2008-09-26 23:43:22 +01:00
pcm990-baseboard.c [ARM] pxa: convert legacy LCD setup of other boards to new one 2008-12-17 22:45:30 +08:00
pm.c [ARM] pxa: Allow platforms to override PSPR setting 2008-09-09 16:32:52 +01:00
poodle.c [ARM] pxa/poodle: add physmap mapping for ROM 2008-12-02 14:43:49 +08:00
pwm.c [ARM] 5303/1: period_cycles should be greater than 1 2008-10-17 13:44:47 +01:00
pxa2xx.c Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2008-08-07 11:06:47 +01:00
pxa3xx.c [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
pxa25x.c [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
pxa27x.c [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
pxa300.c [ARM] 5212/1: pxa: fix build error when CPU_PXA310 is not defined 2008-08-20 23:17:13 +01:00
pxa320.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
pxa930.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
reset.c [ARM] 5330/1: mach-pxa: Fixup reset for systems using reboot=cold or other strings 2008-11-17 14:05:41 +00:00
saar.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
sharpsl.h
…
sharpsl_pm.c [ARM] pxa: fix the corgi_ssp.c dependency issue in {corgi,spitz}_defconfig 2008-10-21 11:36:19 +08:00
sleep.S [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
smemc.c
…
spitz.c [ARM] pxa/spitz: add physmap mapping for ROM 2008-12-02 14:43:49 +08:00
spitz_pm.c [ARM] corgi_lcd: fix simultaneous compilation with corgi_bl 2008-10-29 11:45:37 +08:00
ssp.c [ARM] Convert asm/io.h to linux/io.h 2008-09-06 12:10:45 +01:00
standby.S [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
tavorevb.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
time.c Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2008-10-11 10:09:45 -07:00
tosa-bt.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
tosa.c [ARM] pxa/tosa: add physmap mapping for ROM 2008-12-02 14:43:49 +08:00
trizeps4.c [ARM] remove extra brace in arch/arm/mach-pxa/trizeps4.c 2008-10-18 14:24:08 +01:00
viper.c [ARM] 5308/1: Fix Viper ISA IRQ handling 2008-10-15 13:01:36 +01:00
zylonite.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: add support for USB OHCI 2008-10-07 19:12:59 +01:00
zylonite_pxa320.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00