linux/drivers/i2c/busses/i2c-designware-baytrail.c

188 lines
4.4 KiB
C

/*
* Intel BayTrail PMIC I2C bus semaphore implementaion
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/acpi.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/pm_qos.h>
#include <asm/iosf_mbi.h>
#include "i2c-designware-core.h"
#define SEMAPHORE_TIMEOUT 500
#define PUNIT_SEMAPHORE 0x7
#define PUNIT_SEMAPHORE_CHT 0x10e
#define PUNIT_SEMAPHORE_BIT BIT(0)
#define PUNIT_SEMAPHORE_ACQUIRE BIT(1)
static unsigned long acquired;
static u32 get_sem_addr(struct dw_i2c_dev *dev)
{
if (dev->flags & MODEL_CHERRYTRAIL)
return PUNIT_SEMAPHORE_CHT;
else
return PUNIT_SEMAPHORE;
}
static int get_sem(struct dw_i2c_dev *dev, u32 *sem)
{
u32 addr = get_sem_addr(dev);
u32 data;
int ret;
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &data);
if (ret) {
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
return ret;
}
*sem = data & PUNIT_SEMAPHORE_BIT;
return 0;
}
static void reset_semaphore(struct dw_i2c_dev *dev)
{
if (iosf_mbi_modify(BT_MBI_UNIT_PMC, MBI_REG_READ, get_sem_addr(dev),
0, PUNIT_SEMAPHORE_BIT))
dev_err(dev->dev, "iosf failed to reset punit semaphore during write\n");
pm_qos_update_request(&dev->pm_qos, PM_QOS_DEFAULT_VALUE);
iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_END,
NULL);
iosf_mbi_punit_release();
}
static int baytrail_i2c_acquire(struct dw_i2c_dev *dev)
{
u32 addr;
u32 sem = PUNIT_SEMAPHORE_ACQUIRE;
int ret;
unsigned long start, end;
might_sleep();
if (!dev || !dev->dev)
return -ENODEV;
if (!dev->release_lock)
return 0;
iosf_mbi_punit_acquire();
iosf_mbi_call_pmic_bus_access_notifier_chain(MBI_PMIC_BUS_ACCESS_BEGIN,
NULL);
/*
* Disallow the CPU to enter C6 or C7 state, entering these states
* requires the punit to talk to the pmic and if this happens while
* we're holding the semaphore, the SoC hangs.
*/
pm_qos_update_request(&dev->pm_qos, 0);
addr = get_sem_addr(dev);
/* host driver writes to side band semaphore register */
ret = iosf_mbi_write(BT_MBI_UNIT_PMC, MBI_REG_WRITE, addr, sem);
if (ret) {
dev_err(dev->dev, "iosf punit semaphore request failed\n");
goto out;
}
/* host driver waits for bit 0 to be set in semaphore register */
start = jiffies;
end = start + msecs_to_jiffies(SEMAPHORE_TIMEOUT);
do {
ret = get_sem(dev, &sem);
if (!ret && sem) {
acquired = jiffies;
dev_dbg(dev->dev, "punit semaphore acquired after %ums\n",
jiffies_to_msecs(jiffies - start));
return 0;
}
usleep_range(1000, 2000);
} while (time_before(jiffies, end));
dev_err(dev->dev, "punit semaphore timed out, resetting\n");
out:
reset_semaphore(dev);
ret = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ, addr, &sem);
if (ret)
dev_err(dev->dev, "iosf failed to read punit semaphore\n");
else
dev_err(dev->dev, "PUNIT SEM: %d\n", sem);
WARN_ON(1);
return -ETIMEDOUT;
}
static void baytrail_i2c_release(struct dw_i2c_dev *dev)
{
if (!dev || !dev->dev)
return;
if (!dev->acquire_lock)
return;
reset_semaphore(dev);
dev_dbg(dev->dev, "punit semaphore held for %ums\n",
jiffies_to_msecs(jiffies - acquired));
}
int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
{
acpi_status status;
unsigned long long shared_host = 0;
acpi_handle handle;
if (!dev || !dev->dev)
return 0;
handle = ACPI_HANDLE(dev->dev);
if (!handle)
return 0;
status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
if (ACPI_FAILURE(status))
return 0;
if (!shared_host)
return 0;
if (!iosf_mbi_available())
return -EPROBE_DEFER;
dev_info(dev->dev, "I2C bus managed by PUNIT\n");
dev->acquire_lock = baytrail_i2c_acquire;
dev->release_lock = baytrail_i2c_release;
dev->pm_disabled = true;
pm_qos_add_request(&dev->pm_qos, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
}
void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
{
if (dev->acquire_lock)
pm_qos_remove_request(&dev->pm_qos);
}