qemu-e2k/hw/pci-host/q35.c

561 lines
19 KiB
C
Raw Normal View History

/*
* QEMU MCH/ICH9 PCI Bridge Emulation
*
* Copyright (c) 2006 Fabrice Bellard
* Copyright (c) 2009, 2010, 2011
* Isaku Yamahata <yamahata at valinux co jp>
* VA Linux Systems Japan K.K.
* Copyright (C) 2012 Jason Baron <jbaron@redhat.com>
*
* This is based on piix.c, but heavily modified.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/hw.h"
#include "hw/pci-host/q35.h"
2016-03-14 09:01:28 +01:00
#include "qapi/error.h"
#include "qapi/visitor.h"
/****************************************************************************
* Q35 host
*/
static void q35_host_realize(DeviceState *dev, Error **errp)
{
PCIHostState *pci = PCI_HOST_BRIDGE(dev);
Q35PCIHost *s = Q35_HOST_DEVICE(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, &pci->conf_mem);
sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_ADDR, 4);
sysbus_add_io(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, &pci->data_mem);
sysbus_init_ioports(sbd, MCH_HOST_BRIDGE_CONFIG_DATA, 4);
pci->bus = pci_bus_new(DEVICE(s), "pcie.0",
s->mch.pci_address_space, s->mch.address_space_io,
0, TYPE_PCIE_BUS);
qdev_set_parent_bus(DEVICE(&s->mch), BUS(pci->bus));
qdev_init_nofail(DEVICE(&s->mch));
}
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
static const char *q35_host_root_bus_path(PCIHostState *host_bridge,
PCIBus *rootbus)
{
Q35PCIHost *s = Q35_HOST_DEVICE(host_bridge);
/* For backwards compat with old device paths */
if (s->mch.short_root_bus) {
return "0000";
}
return "0000:00";
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
}
static void q35_host_get_pci_hole_start(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
uint32_t value = s->mch.pci_info.w32.begin;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, errp);
}
static void q35_host_get_pci_hole_end(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
uint32_t value = s->mch.pci_info.w32.end;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, errp);
}
static void q35_host_get_pci_hole64_start(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
PCIHostState *h = PCI_HOST_BRIDGE(obj);
Range w64;
pci_bus_get_w64_range(h->bus, &w64);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint64(v, name, &w64.begin, errp);
}
static void q35_host_get_pci_hole64_end(Object *obj, Visitor *v,
const char *name, void *opaque,
Error **errp)
{
PCIHostState *h = PCI_HOST_BRIDGE(obj);
Range w64;
pci_bus_get_w64_range(h->bus, &w64);
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint64(v, name, &w64.end, errp);
}
static void q35_host_get_mmcfg_size(Object *obj, Visitor *v, const char *name,
void *opaque, Error **errp)
{
PCIExpressHost *e = PCIE_HOST_BRIDGE(obj);
uint32_t value = e->size;
qapi: Swap visit_* arguments for consistent 'name' placement JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-01-29 14:48:54 +01:00
visit_type_uint32(v, name, &value, errp);
}
static Property mch_props[] = {
DEFINE_PROP_UINT64(PCIE_HOST_MCFG_BASE, Q35PCIHost, parent_obj.base_addr,
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT),
DEFINE_PROP_SIZE(PCI_HOST_PROP_PCI_HOLE64_SIZE, Q35PCIHost,
mch.pci_hole64_size, DEFAULT_PCI_HOLE64_SIZE),
DEFINE_PROP_UINT32("short_root_bus", Q35PCIHost, mch.short_root_bus, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void q35_host_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
pci: Replace pci_find_domain() with more general pci_root_bus_path() pci_find_domain() is used in a number of places where we want an id for a whole PCI domain (i.e. the subtree under a PCI root bus). The trouble is that many platforms may support multiple independent host bridges with no hardware supplied notion of domain number. This patch, therefore, replaces calls to pci_find_domain() with calls to a new pci_root_bus_path() returning a string. The new call is implemented in terms of a new callback in the host bridge class, so it can be defined in some way that's well defined for the platform. When no callback is available we fall back on the qbus name. Most current uses of pci_find_domain() are for error or informational messages, so the change in identifiers should be harmless. The exception is pci_get_dev_path(), whose results form part of migration streams. To maintain compatibility with old migration streams, the PIIX PCI host is altered to always supply "0000" for this path, which matches the old domain number (since the code didn't actually support domains other than 0). For the pseries (spapr) PCI bridge we use a different platform-unique identifier (pseries machines can routinely have dozens of PCI host bridges). Theoretically that breaks migration streams, but given that we don't yet have migration support for pseries, it doesn't matter. Any other machines that have working migration support including PCI devices will need to be updated to maintain migration stream compatibility. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-06 10:48:49 +02:00
hc->root_bus_path = q35_host_root_bus_path;
dc->realize = q35_host_realize;
dc->props = mch_props;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->fw_name = "pci";
}
static void q35_host_initfn(Object *obj)
{
Q35PCIHost *s = Q35_HOST_DEVICE(obj);
PCIHostState *phb = PCI_HOST_BRIDGE(obj);
memory_region_init_io(&phb->conf_mem, obj, &pci_host_conf_le_ops, phb,
"pci-conf-idx", 4);
memory_region_init_io(&phb->data_mem, obj, &pci_host_data_le_ops, phb,
"pci-conf-data", 4);
object_initialize(&s->mch, sizeof(s->mch), TYPE_MCH_PCI_DEVICE);
object_property_add_child(OBJECT(s), "mch", OBJECT(&s->mch), NULL);
qdev_prop_set_uint32(DEVICE(&s->mch), "addr", PCI_DEVFN(0, 0));
qdev_prop_set_bit(DEVICE(&s->mch), "multifunction", false);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_START, "int",
q35_host_get_pci_hole_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE_END, "int",
q35_host_get_pci_hole_end,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_START, "int",
q35_host_get_pci_hole64_start,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCI_HOST_PROP_PCI_HOLE64_END, "int",
q35_host_get_pci_hole64_end,
NULL, NULL, NULL, NULL);
object_property_add(obj, PCIE_HOST_MCFG_SIZE, "int",
q35_host_get_mmcfg_size,
NULL, NULL, NULL, NULL);
/* Leave enough space for the biggest MCFG BAR */
/* TODO: this matches current bios behaviour, but
* it's not a power of two, which means an MTRR
* can't cover it exactly.
*/
s->mch.pci_info.w32.begin = MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT +
MCH_HOST_BRIDGE_PCIEXBAR_MAX;
s->mch.pci_info.w32.end = IO_APIC_DEFAULT_ADDRESS;
}
static const TypeInfo q35_host_info = {
.name = TYPE_Q35_HOST_DEVICE,
.parent = TYPE_PCIE_HOST_BRIDGE,
.instance_size = sizeof(Q35PCIHost),
.instance_init = q35_host_initfn,
.class_init = q35_host_class_init,
};
/****************************************************************************
* MCH D0:F0
*/
static uint64_t tseg_blackhole_read(void *ptr, hwaddr reg, unsigned size)
{
return 0xffffffff;
}
static void tseg_blackhole_write(void *opaque, hwaddr addr, uint64_t val,
unsigned width)
{
/* nothing */
}
static const MemoryRegionOps tseg_blackhole_ops = {
.read = tseg_blackhole_read,
.write = tseg_blackhole_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.impl.min_access_size = 4,
.impl.max_access_size = 4,
.endianness = DEVICE_LITTLE_ENDIAN,
};
/* PCIe MMCFG */
static void mch_update_pciexbar(MCHPCIState *mch)
{
PCIDevice *pci_dev = PCI_DEVICE(mch);
BusState *bus = qdev_get_parent_bus(DEVICE(mch));
PCIExpressHost *pehb = PCIE_HOST_BRIDGE(bus->parent);
uint64_t pciexbar;
int enable;
uint64_t addr;
uint64_t addr_mask;
uint32_t length;
pciexbar = pci_get_quad(pci_dev->config + MCH_HOST_BRIDGE_PCIEXBAR);
enable = pciexbar & MCH_HOST_BRIDGE_PCIEXBAREN;
addr_mask = MCH_HOST_BRIDGE_PCIEXBAR_ADMSK;
switch (pciexbar & MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_MASK) {
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_256M:
length = 256 * 1024 * 1024;
break;
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_128M:
length = 128 * 1024 * 1024;
addr_mask |= MCH_HOST_BRIDGE_PCIEXBAR_128ADMSK |
MCH_HOST_BRIDGE_PCIEXBAR_64ADMSK;
break;
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_64M:
length = 64 * 1024 * 1024;
addr_mask |= MCH_HOST_BRIDGE_PCIEXBAR_64ADMSK;
break;
case MCH_HOST_BRIDGE_PCIEXBAR_LENGTH_RVD:
default:
enable = 0;
length = 0;
abort();
break;
}
addr = pciexbar & addr_mask;
pcie_host_mmcfg_update(pehb, enable, addr, length);
/* Leave enough space for the MCFG BAR */
/*
* TODO: this matches current bios behaviour, but it's not a power of two,
* which means an MTRR can't cover it exactly.
*/
if (enable) {
mch->pci_info.w32.begin = addr + length;
} else {
mch->pci_info.w32.begin = MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT;
}
}
/* PAM */
static void mch_update_pam(MCHPCIState *mch)
{
PCIDevice *pd = PCI_DEVICE(mch);
int i;
memory_region_transaction_begin();
for (i = 0; i < 13; i++) {
pam_update(&mch->pam_regions[i], i,
pd->config[MCH_HOST_BRIDGE_PAM0 + ((i + 1) / 2)]);
}
memory_region_transaction_commit();
}
/* SMRAM */
static void mch_update_smram(MCHPCIState *mch)
{
PCIDevice *pd = PCI_DEVICE(mch);
bool h_smrame = (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_H_SMRAME);
uint32_t tseg_size;
/* implement SMRAM.D_LCK */
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & MCH_HOST_BRIDGE_SMRAM_D_LCK) {
pd->config[MCH_HOST_BRIDGE_SMRAM] &= ~MCH_HOST_BRIDGE_SMRAM_D_OPEN;
pd->wmask[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_WMASK_LCK;
pd->wmask[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_WMASK_LCK;
}
memory_region_transaction_begin();
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & SMRAM_D_OPEN) {
/* Hide (!) low SMRAM if H_SMRAME = 1 */
memory_region_set_enabled(&mch->smram_region, h_smrame);
/* Show high SMRAM if H_SMRAME = 1 */
memory_region_set_enabled(&mch->open_high_smram, h_smrame);
} else {
/* Hide high SMRAM and low SMRAM */
memory_region_set_enabled(&mch->smram_region, true);
memory_region_set_enabled(&mch->open_high_smram, false);
}
if (pd->config[MCH_HOST_BRIDGE_SMRAM] & SMRAM_G_SMRAME) {
memory_region_set_enabled(&mch->low_smram, !h_smrame);
memory_region_set_enabled(&mch->high_smram, h_smrame);
} else {
memory_region_set_enabled(&mch->low_smram, false);
memory_region_set_enabled(&mch->high_smram, false);
}
if (pd->config[MCH_HOST_BRIDGE_ESMRAMC] & MCH_HOST_BRIDGE_ESMRAMC_T_EN) {
switch (pd->config[MCH_HOST_BRIDGE_ESMRAMC] &
MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_MASK) {
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_1MB:
tseg_size = 1024 * 1024;
break;
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_2MB:
tseg_size = 1024 * 1024 * 2;
break;
case MCH_HOST_BRIDGE_ESMRAMC_TSEG_SZ_8MB:
tseg_size = 1024 * 1024 * 8;
break;
default:
tseg_size = 0;
break;
}
} else {
tseg_size = 0;
}
memory_region_del_subregion(mch->system_memory, &mch->tseg_blackhole);
memory_region_set_enabled(&mch->tseg_blackhole, tseg_size);
memory_region_set_size(&mch->tseg_blackhole, tseg_size);
memory_region_add_subregion_overlap(mch->system_memory,
mch->below_4g_mem_size - tseg_size,
&mch->tseg_blackhole, 1);
memory_region_set_enabled(&mch->tseg_window, tseg_size);
memory_region_set_size(&mch->tseg_window, tseg_size);
memory_region_set_address(&mch->tseg_window,
mch->below_4g_mem_size - tseg_size);
memory_region_set_alias_offset(&mch->tseg_window,
mch->below_4g_mem_size - tseg_size);
memory_region_transaction_commit();
}
static void mch_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len)
{
MCHPCIState *mch = MCH_PCI_DEVICE(d);
pci_default_write_config(d, address, val, len);
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_PAM0,
MCH_HOST_BRIDGE_PAM_SIZE)) {
mch_update_pam(mch);
}
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_PCIEXBAR,
MCH_HOST_BRIDGE_PCIEXBAR_SIZE)) {
mch_update_pciexbar(mch);
}
if (ranges_overlap(address, len, MCH_HOST_BRIDGE_SMRAM,
MCH_HOST_BRIDGE_SMRAM_SIZE)) {
mch_update_smram(mch);
}
}
static void mch_update(MCHPCIState *mch)
{
mch_update_pciexbar(mch);
mch_update_pam(mch);
mch_update_smram(mch);
}
static int mch_post_load(void *opaque, int version_id)
{
MCHPCIState *mch = opaque;
mch_update(mch);
return 0;
}
static const VMStateDescription vmstate_mch = {
.name = "mch",
.version_id = 1,
.minimum_version_id = 1,
.post_load = mch_post_load,
.fields = (VMStateField[]) {
VMSTATE_PCI_DEVICE(parent_obj, MCHPCIState),
/* Used to be smm_enabled, which was basically always zero because
* SeaBIOS hardly uses SMM. SMRAM is now handled by CPU code.
*/
VMSTATE_UNUSED(1),
VMSTATE_END_OF_LIST()
}
};
static void mch_reset(DeviceState *qdev)
{
PCIDevice *d = PCI_DEVICE(qdev);
MCHPCIState *mch = MCH_PCI_DEVICE(d);
pci_set_quad(d->config + MCH_HOST_BRIDGE_PCIEXBAR,
MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT);
d->config[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_DEFAULT;
d->config[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_DEFAULT;
d->wmask[MCH_HOST_BRIDGE_SMRAM] = MCH_HOST_BRIDGE_SMRAM_WMASK;
d->wmask[MCH_HOST_BRIDGE_ESMRAMC] = MCH_HOST_BRIDGE_ESMRAMC_WMASK;
mch_update(mch);
}
static AddressSpace *q35_host_dma_iommu(PCIBus *bus, void *opaque, int devfn)
{
IntelIOMMUState *s = opaque;
VTDAddressSpace *vtd_as;
assert(0 <= devfn && devfn <= VTD_PCI_DEVFN_MAX);
vtd_as = vtd_find_add_as(s, bus, devfn);
return &vtd_as->as;
}
static void mch_init_dmar(MCHPCIState *mch)
{
PCIBus *pci_bus = PCI_BUS(qdev_get_parent_bus(DEVICE(mch)));
mch->iommu = INTEL_IOMMU_DEVICE(qdev_create(NULL, TYPE_INTEL_IOMMU_DEVICE));
object_property_add_child(OBJECT(mch), "intel-iommu",
OBJECT(mch->iommu), NULL);
qdev_init_nofail(DEVICE(mch->iommu));
sysbus_mmio_map(SYS_BUS_DEVICE(mch->iommu), 0, Q35_HOST_BRIDGE_IOMMU_ADDR);
pci_setup_iommu(pci_bus, q35_host_dma_iommu, mch->iommu);
}
static void mch_realize(PCIDevice *d, Error **errp)
{
int i;
MCHPCIState *mch = MCH_PCI_DEVICE(d);
/* setup pci memory mapping */
pc_pci_as_mapping_init(OBJECT(mch), mch->system_memory,
mch->pci_address_space);
/* if *disabled* show SMRAM to all CPUs */
memory_region_init_alias(&mch->smram_region, OBJECT(mch), "smram-region",
mch->pci_address_space, 0xa0000, 0x20000);
memory_region_add_subregion_overlap(mch->system_memory, 0xa0000,
&mch->smram_region, 1);
memory_region_set_enabled(&mch->smram_region, true);
memory_region_init_alias(&mch->open_high_smram, OBJECT(mch), "smram-open-high",
mch->ram_memory, 0xa0000, 0x20000);
memory_region_add_subregion_overlap(mch->system_memory, 0xfeda0000,
&mch->open_high_smram, 1);
memory_region_set_enabled(&mch->open_high_smram, false);
/* smram, as seen by SMM CPUs */
memory_region_init(&mch->smram, OBJECT(mch), "smram", 1ull << 32);
memory_region_set_enabled(&mch->smram, true);
memory_region_init_alias(&mch->low_smram, OBJECT(mch), "smram-low",
mch->ram_memory, 0xa0000, 0x20000);
memory_region_set_enabled(&mch->low_smram, true);
memory_region_add_subregion(&mch->smram, 0xa0000, &mch->low_smram);
memory_region_init_alias(&mch->high_smram, OBJECT(mch), "smram-high",
mch->ram_memory, 0xa0000, 0x20000);
memory_region_set_enabled(&mch->high_smram, true);
memory_region_add_subregion(&mch->smram, 0xfeda0000, &mch->high_smram);
memory_region_init_io(&mch->tseg_blackhole, OBJECT(mch),
&tseg_blackhole_ops, NULL,
"tseg-blackhole", 0);
memory_region_set_enabled(&mch->tseg_blackhole, false);
memory_region_add_subregion_overlap(mch->system_memory,
mch->below_4g_mem_size,
&mch->tseg_blackhole, 1);
memory_region_init_alias(&mch->tseg_window, OBJECT(mch), "tseg-window",
mch->ram_memory, mch->below_4g_mem_size, 0);
memory_region_set_enabled(&mch->tseg_window, false);
memory_region_add_subregion(&mch->smram, mch->below_4g_mem_size,
&mch->tseg_window);
object_property_add_const_link(qdev_get_machine(), "smram",
OBJECT(&mch->smram), &error_abort);
init_pam(DEVICE(mch), mch->ram_memory, mch->system_memory,
mch->pci_address_space, &mch->pam_regions[0],
PAM_BIOS_BASE, PAM_BIOS_SIZE);
for (i = 0; i < 12; ++i) {
init_pam(DEVICE(mch), mch->ram_memory, mch->system_memory,
mch->pci_address_space, &mch->pam_regions[i+1],
PAM_EXPAN_BASE + i * PAM_EXPAN_SIZE, PAM_EXPAN_SIZE);
}
/* Intel IOMMU (VT-d) */
if (object_property_get_bool(qdev_get_machine(), "iommu", NULL)) {
mch_init_dmar(mch);
}
}
uint64_t mch_mcfg_base(void)
{
bool ambiguous;
Object *o = object_resolve_path_type("", TYPE_MCH_PCI_DEVICE, &ambiguous);
if (!o) {
return 0;
}
return MCH_HOST_BRIDGE_PCIEXBAR_DEFAULT;
}
static void mch_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = mch_realize;
k->config_write = mch_write_config;
dc->reset = mch_reset;
set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
dc->desc = "Host bridge";
dc->vmsd = &vmstate_mch;
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = PCI_DEVICE_ID_INTEL_Q35_MCH;
k->revision = MCH_HOST_BRIDGE_REVISION_DEFAULT;
k->class_id = PCI_CLASS_BRIDGE_HOST;
/*
* PCI-facing part of the host bridge, not usable without the
* host-facing part, which can't be device_add'ed, yet.
*/
dc->cannot_instantiate_with_device_add_yet = true;
}
static const TypeInfo mch_info = {
.name = TYPE_MCH_PCI_DEVICE,
.parent = TYPE_PCI_DEVICE,
.instance_size = sizeof(MCHPCIState),
.class_init = mch_class_init,
};
static void q35_register(void)
{
type_register_static(&mch_info);
type_register_static(&q35_host_info);
}
type_init(q35_register);