qemu-e2k/softmmu/qdev-monitor.c

1062 lines
31 KiB
C
Raw Normal View History

/*
* Dynamic device configuration and creation.
*
* Copyright (c) 2009 CodeSourcery
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "monitor/hmp.h"
#include "monitor/monitor.h"
#include "monitor/qdev.h"
#include "sysemu/arch_init.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-qdev.h"
#include "qapi/qmp/dispatch.h"
#include "qapi/qmp/qdict.h"
#include "qapi/qmp/qerror.h"
#include "qapi/qmp/qstring.h"
#include "qapi/qobject-input-visitor.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include "qemu/help_option.h"
#include "qemu/option.h"
#include "qemu/qemu-print.h"
2019-10-29 12:48:55 +01:00
#include "qemu/option_int.h"
#include "sysemu/block-backend.h"
#include "migration/misc.h"
2019-10-29 12:48:55 +01:00
#include "migration/migration.h"
#include "qemu/cutils.h"
#include "hw/qdev-properties.h"
#include "hw/clock.h"
#include "hw/boards.h"
/*
* Aliases were a bad idea from the start. Let's keep them
* from spreading further.
*/
typedef struct QDevAlias
{
const char *typename;
const char *alias;
uint32_t arch_mask;
} QDevAlias;
/* default virtio transport per architecture */
#define QEMU_ARCH_VIRTIO_PCI (QEMU_ARCH_ALPHA | QEMU_ARCH_ARM | \
QEMU_ARCH_HPPA | QEMU_ARCH_I386 | \
QEMU_ARCH_MIPS | QEMU_ARCH_PPC | \
QEMU_ARCH_RISCV | QEMU_ARCH_SH4 | \
QEMU_ARCH_SPARC | QEMU_ARCH_XTENSA)
#define QEMU_ARCH_VIRTIO_CCW (QEMU_ARCH_S390X)
#define QEMU_ARCH_VIRTIO_MMIO (QEMU_ARCH_M68K)
/* Please keep this table sorted by typename. */
static const QDevAlias qdev_alias_table[] = {
{ "AC97", "ac97" }, /* -soundhw name */
{ "e1000", "e1000-82540em" },
{ "ES1370", "es1370" }, /* -soundhw name */
{ "ich9-ahci", "ahci" },
{ "lsi53c895a", "lsi" },
{ "virtio-9p-device", "virtio-9p", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-9p-ccw", "virtio-9p", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-9p-pci", "virtio-9p", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-balloon-device", "virtio-balloon", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-balloon-ccw", "virtio-balloon", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-balloon-pci", "virtio-balloon", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-blk-device", "virtio-blk", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-blk-ccw", "virtio-blk", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-blk-pci", "virtio-blk", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-gpu-device", "virtio-gpu", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-gpu-ccw", "virtio-gpu", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-gpu-pci", "virtio-gpu", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-gpu-gl-device", "virtio-gpu-gl", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-gpu-gl-pci", "virtio-gpu-gl", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-input-host-device", "virtio-input-host", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-input-host-ccw", "virtio-input-host", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-input-host-pci", "virtio-input-host", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-iommu-pci", "virtio-iommu", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-keyboard-device", "virtio-keyboard", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-keyboard-ccw", "virtio-keyboard", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-keyboard-pci", "virtio-keyboard", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-mouse-device", "virtio-mouse", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-mouse-ccw", "virtio-mouse", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-mouse-pci", "virtio-mouse", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-net-device", "virtio-net", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-net-ccw", "virtio-net", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-net-pci", "virtio-net", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-rng-device", "virtio-rng", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-rng-ccw", "virtio-rng", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-rng-pci", "virtio-rng", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-scsi-device", "virtio-scsi", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-scsi-ccw", "virtio-scsi", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-scsi-pci", "virtio-scsi", QEMU_ARCH_VIRTIO_PCI },
{ "virtio-serial-device", "virtio-serial", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-serial-ccw", "virtio-serial", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-serial-pci", "virtio-serial", QEMU_ARCH_VIRTIO_PCI},
{ "virtio-tablet-device", "virtio-tablet", QEMU_ARCH_VIRTIO_MMIO },
{ "virtio-tablet-ccw", "virtio-tablet", QEMU_ARCH_VIRTIO_CCW },
{ "virtio-tablet-pci", "virtio-tablet", QEMU_ARCH_VIRTIO_PCI },
{ }
};
static const char *qdev_class_get_alias(DeviceClass *dc)
{
const char *typename = object_class_get_name(OBJECT_CLASS(dc));
int i;
for (i = 0; qdev_alias_table[i].typename; i++) {
if (qdev_alias_table[i].arch_mask &&
!(qdev_alias_table[i].arch_mask & arch_type)) {
continue;
}
if (strcmp(qdev_alias_table[i].typename, typename) == 0) {
return qdev_alias_table[i].alias;
}
}
return NULL;
}
static bool qdev_class_has_alias(DeviceClass *dc)
{
return (qdev_class_get_alias(dc) != NULL);
}
static void qdev_print_devinfo(DeviceClass *dc)
{
qemu_printf("name \"%s\"", object_class_get_name(OBJECT_CLASS(dc)));
if (dc->bus_type) {
qemu_printf(", bus %s", dc->bus_type);
}
if (qdev_class_has_alias(dc)) {
qemu_printf(", alias \"%s\"", qdev_class_get_alias(dc));
}
if (dc->desc) {
qemu_printf(", desc \"%s\"", dc->desc);
}
qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 22:35:44 +02:00
if (!dc->user_creatable) {
qemu_printf(", no-user");
}
qemu_printf("\n");
}
static void qdev_print_devinfos(bool show_no_user)
{
static const char *cat_name[DEVICE_CATEGORY_MAX + 1] = {
[DEVICE_CATEGORY_BRIDGE] = "Controller/Bridge/Hub",
[DEVICE_CATEGORY_USB] = "USB",
[DEVICE_CATEGORY_STORAGE] = "Storage",
[DEVICE_CATEGORY_NETWORK] = "Network",
[DEVICE_CATEGORY_INPUT] = "Input",
[DEVICE_CATEGORY_DISPLAY] = "Display",
[DEVICE_CATEGORY_SOUND] = "Sound",
[DEVICE_CATEGORY_MISC] = "Misc",
[DEVICE_CATEGORY_CPU] = "CPU",
[DEVICE_CATEGORY_WATCHDOG]= "Watchdog",
[DEVICE_CATEGORY_MAX] = "Uncategorized",
};
GSList *list, *elt;
int i;
bool cat_printed;
module_load_qom_all();
list = object_class_get_list_sorted(TYPE_DEVICE, false);
for (i = 0; i <= DEVICE_CATEGORY_MAX; i++) {
cat_printed = false;
for (elt = list; elt; elt = elt->next) {
DeviceClass *dc = OBJECT_CLASS_CHECK(DeviceClass, elt->data,
TYPE_DEVICE);
if ((i < DEVICE_CATEGORY_MAX
? !test_bit(i, dc->categories)
: !bitmap_empty(dc->categories, DEVICE_CATEGORY_MAX))
|| (!show_no_user
qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 22:35:44 +02:00
&& !dc->user_creatable)) {
continue;
}
if (!cat_printed) {
qemu_printf("%s%s devices:\n", i ? "\n" : "", cat_name[i]);
cat_printed = true;
}
qdev_print_devinfo(dc);
}
}
g_slist_free(list);
}
static const char *find_typename_by_alias(const char *alias)
{
int i;
for (i = 0; qdev_alias_table[i].alias; i++) {
if (qdev_alias_table[i].arch_mask &&
!(qdev_alias_table[i].arch_mask & arch_type)) {
continue;
}
if (strcmp(qdev_alias_table[i].alias, alias) == 0) {
return qdev_alias_table[i].typename;
}
}
return NULL;
}
static DeviceClass *qdev_get_device_class(const char **driver, Error **errp)
{
ObjectClass *oc;
DeviceClass *dc;
const char *original_name = *driver;
oc = module_object_class_by_name(*driver);
if (!oc) {
const char *typename = find_typename_by_alias(*driver);
if (typename) {
*driver = typename;
oc = module_object_class_by_name(*driver);
}
}
if (!object_class_dynamic_cast(oc, TYPE_DEVICE)) {
if (*driver != original_name) {
error_setg(errp, "'%s' (alias '%s') is not a valid device model"
" name", original_name, *driver);
} else {
error_setg(errp, "'%s' is not a valid device model name", *driver);
}
return NULL;
}
if (object_class_is_abstract(oc)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "driver",
"a non-abstract device type");
return NULL;
}
dc = DEVICE_CLASS(oc);
qdev: Replace cannot_instantiate_with_device_add_yet with !user_creatable cannot_instantiate_with_device_add_yet was introduced by commit efec3dd631d94160288392721a5f9c39e50fb2bc to replace no_user. It was supposed to be a temporary measure. When it was introduced, we had 54 cannot_instantiate_with_device_add_yet=true lines in the code. Today (3 years later) this number has not shrunk: we now have 57 cannot_instantiate_with_device_add_yet=true lines. I think it is safe to say it is not a temporary measure, and we won't see the flag go away soon. Instead of a long field name that misleads people to believe it is temporary, replace it a shorter and less misleading field: user_creatable. Except for code comments, changes were generated using the following Coccinelle patch: @@ expression DC; @@ ( -DC->cannot_instantiate_with_device_add_yet = false; +DC->user_creatable = true; | -DC->cannot_instantiate_with_device_add_yet = true; +DC->user_creatable = false; ) @@ typedef ObjectClass; expression dc; identifier class, data; @@ static void device_class_init(ObjectClass *class, void *data) { ... dc->hotpluggable = true; +dc->user_creatable = true; ... } @@ @@ struct DeviceClass { ... -bool cannot_instantiate_with_device_add_yet; +bool user_creatable; ... } @@ expression DC; @@ ( -!DC->cannot_instantiate_with_device_add_yet +DC->user_creatable | -DC->cannot_instantiate_with_device_add_yet +!DC->user_creatable ) Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Thomas Huth <thuth@redhat.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20170503203604.31462-2-ehabkost@redhat.com> [ehabkost: kept "TODO remove once we're there" comment] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-05-03 22:35:44 +02:00
if (!dc->user_creatable ||
(phase_check(PHASE_MACHINE_READY) && !dc->hotpluggable)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "driver",
"a pluggable device type");
return NULL;
}
if (object_class_dynamic_cast(oc, TYPE_SYS_BUS_DEVICE)) {
/* sysbus devices need to be allowed by the machine */
MachineClass *mc = MACHINE_CLASS(object_get_class(qdev_get_machine()));
if (!device_type_is_dynamic_sysbus(mc, *driver)) {
error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "driver",
"a dynamic sysbus device type for the machine");
return NULL;
}
}
return dc;
}
int qdev_device_help(QemuOpts *opts)
{
Error *local_err = NULL;
const char *driver;
ObjectPropertyInfoList *prop_list;
ObjectPropertyInfoList *prop;
GPtrArray *array;
int i;
driver = qemu_opt_get(opts, "driver");
if (driver && is_help_option(driver)) {
qdev_print_devinfos(false);
return 1;
}
if (!driver || !qemu_opt_has_help_opt(opts)) {
return 0;
}
Revert "qdev: Use qdev_get_device_class() for -device <type>,help" This reverts commit 31bed5509dfcbdfc293154ce81086a4dbd7a80b6. The reverted commit changed qdev_device_help() to reject abstract devices and devices that have cannot_instantiate_with_device_add_yet set, to fix crash bugs like -device x86_64-cpu,help. Rejecting abstract devices makes sense: they're purely internal, and the implementation of the help feature can't cope with them. Rejecting non-pluggable devices makes less sense: even though you can't use them with -device, the help may still be useful elsewhere, for instance with -global. This is a regression: -device FOO,help used to help even for FOO that aren't pluggable. The previous two commits fixed the crash bug at a lower layer, so reverting this one is now safe. Fixes the -device FOO,help regression, except for the broken devices marked cannot_even_create_with_object_new_yet. For those, the error message is improved. Example of a device where the regression is fixed: $ qemu-system-x86_64 -device PIIX4_PM,help PIIX4_PM.command_serr_enable=bool (on/off) PIIX4_PM.multifunction=bool (on/off) PIIX4_PM.rombar=uint32 PIIX4_PM.romfile=str PIIX4_PM.addr=int32 (Slot and optional function number, example: 06.0 or 06) PIIX4_PM.memory-hotplug-support=bool PIIX4_PM.acpi-pci-hotplug-with-bridge-support=bool PIIX4_PM.s4_val=uint8 PIIX4_PM.disable_s4=uint8 PIIX4_PM.disable_s3=uint8 PIIX4_PM.smb_io_base=uint32 Example of a device where it isn't fixed: $ qemu-system-x86_64 -device host-x86_64-cpu,help Can't list properties of device 'host-x86_64-cpu' Both failed with "Parameter 'driver' expects pluggable device type" before. Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-11-git-send-email-armbru@redhat.com>
2015-10-01 10:59:59 +02:00
if (!object_class_by_name(driver)) {
const char *typename = find_typename_by_alias(driver);
if (typename) {
driver = typename;
}
}
prop_list = qmp_device_list_properties(driver, &local_err);
if (local_err) {
goto error;
}
if (prop_list) {
qemu_printf("%s options:\n", driver);
} else {
qemu_printf("There are no options for %s.\n", driver);
}
array = g_ptr_array_new();
for (prop = prop_list; prop; prop = prop->next) {
g_ptr_array_add(array,
object_property_help(prop->value->name,
prop->value->type,
prop->value->default_value,
prop->value->description));
}
g_ptr_array_sort(array, (GCompareFunc)qemu_pstrcmp0);
for (i = 0; i < array->len; i++) {
qemu_printf("%s\n", (char *)array->pdata[i]);
}
g_ptr_array_set_free_func(array, g_free);
g_ptr_array_free(array, true);
qapi_free_ObjectPropertyInfoList(prop_list);
return 1;
error:
error_report_err(local_err);
return 1;
}
static Object *qdev_get_peripheral(void)
{
static Object *dev;
if (dev == NULL) {
dev = container_get(qdev_get_machine(), "/peripheral");
}
return dev;
}
static Object *qdev_get_peripheral_anon(void)
{
static Object *dev;
if (dev == NULL) {
dev = container_get(qdev_get_machine(), "/peripheral-anon");
}
return dev;
}
static void qbus_error_append_bus_list_hint(DeviceState *dev,
Error *const *errp)
{
BusState *child;
const char *sep = " ";
error_append_hint(errp, "child buses at \"%s\":",
dev->id ? dev->id : object_get_typename(OBJECT(dev)));
QLIST_FOREACH(child, &dev->child_bus, sibling) {
error_append_hint(errp, "%s\"%s\"", sep, child->name);
sep = ", ";
}
error_append_hint(errp, "\n");
}
static void qbus_error_append_dev_list_hint(BusState *bus,
Error *const *errp)
{
BusChild *kid;
const char *sep = " ";
error_append_hint(errp, "devices at \"%s\":", bus->name);
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
error_append_hint(errp, "%s\"%s\"", sep,
object_get_typename(OBJECT(dev)));
if (dev->id) {
error_append_hint(errp, "/\"%s\"", dev->id);
}
sep = ", ";
}
error_append_hint(errp, "\n");
}
static BusState *qbus_find_bus(DeviceState *dev, char *elem)
{
BusState *child;
QLIST_FOREACH(child, &dev->child_bus, sibling) {
if (strcmp(child->name, elem) == 0) {
return child;
}
}
return NULL;
}
static DeviceState *qbus_find_dev(BusState *bus, char *elem)
{
BusChild *kid;
/*
* try to match in order:
* (1) instance id, if present
* (2) driver name
* (3) driver alias, if present
*/
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
if (dev->id && strcmp(dev->id, elem) == 0) {
return dev;
}
}
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
if (strcmp(object_get_typename(OBJECT(dev)), elem) == 0) {
return dev;
}
}
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
DeviceClass *dc = DEVICE_GET_CLASS(dev);
if (qdev_class_has_alias(dc) &&
strcmp(qdev_class_get_alias(dc), elem) == 0) {
return dev;
}
}
return NULL;
}
static inline bool qbus_is_full(BusState *bus)
{
BusClass *bus_class;
if (bus->full) {
return true;
}
bus_class = BUS_GET_CLASS(bus);
qdev/core: fix qbus_is_full() The qbus_is_full(BusState *bus) function (qdev_monitor.c) compares the max_index value of the BusState structure with the max_dev value of the BusClass structure to determine whether the maximum number of children has been reached for the bus. The problem is, the max_index field of the BusState structure does not necessarily reflect the number of devices that have been plugged into the bus. Whenever a child device is plugged into the bus, the bus's max_index value is assigned to the child device and then incremented. If the child is subsequently unplugged, the value of the max_index does not change and no longer reflects the number of children. When the bus's max_index value reaches the maximum number of devices allowed for the bus (i.e., the max_dev field in the BusClass structure), attempts to plug another device will be rejected claiming that the bus is full -- even if the bus is actually empty. To resolve the problem, a new 'num_children' field is being added to the BusState structure to keep track of the number of children plugged into the bus. It will be incremented when a child is plugged, and decremented when a child is unplugged. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Pierre Morel<pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <1545062250-7573-1-git-send-email-akrowiak@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-17 16:57:30 +01:00
return bus_class->max_dev && bus->num_children >= bus_class->max_dev;
}
/*
* Search the tree rooted at @bus for a bus.
* If @name, search for a bus with that name. Note that bus names
* need not be unique. Yes, that's screwed up.
* Else search for a bus that is a subtype of @bus_typename.
* If more than one exists, prefer one that can take another device.
* Return the bus if found, else %NULL.
*/
static BusState *qbus_find_recursive(BusState *bus, const char *name,
const char *bus_typename)
{
BusChild *kid;
BusState *pick, *child, *ret;
bool match;
assert(name || bus_typename);
if (name) {
match = !strcmp(bus->name, name);
} else {
match = !!object_dynamic_cast(OBJECT(bus), bus_typename);
}
if (match && !qbus_is_full(bus)) {
return bus; /* root matches and isn't full */
}
pick = match ? bus : NULL;
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
QLIST_FOREACH(child, &dev->child_bus, sibling) {
ret = qbus_find_recursive(child, name, bus_typename);
if (ret && !qbus_is_full(ret)) {
return ret; /* a descendant matches and isn't full */
}
if (ret && !pick) {
pick = ret;
}
}
}
/* root or a descendant matches, but is full */
return pick;
}
static BusState *qbus_find(const char *path, Error **errp)
{
DeviceState *dev;
BusState *bus;
char elem[128];
int pos, len;
/* find start element */
if (path[0] == '/') {
bus = sysbus_get_default();
pos = 0;
} else {
if (sscanf(path, "%127[^/]%n", elem, &len) != 1) {
assert(!path[0]);
elem[0] = len = 0;
}
bus = qbus_find_recursive(sysbus_get_default(), elem, NULL);
if (!bus) {
error_setg(errp, "Bus '%s' not found", elem);
return NULL;
}
pos = len;
}
for (;;) {
assert(path[pos] == '/' || !path[pos]);
while (path[pos] == '/') {
pos++;
}
if (path[pos] == '\0') {
break;
}
/* find device */
if (sscanf(path+pos, "%127[^/]%n", elem, &len) != 1) {
g_assert_not_reached();
elem[0] = len = 0;
}
pos += len;
dev = qbus_find_dev(bus, elem);
if (!dev) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", elem);
qbus_error_append_dev_list_hint(bus, errp);
return NULL;
}
assert(path[pos] == '/' || !path[pos]);
while (path[pos] == '/') {
pos++;
}
if (path[pos] == '\0') {
/* last specified element is a device. If it has exactly
* one child bus accept it nevertheless */
if (dev->num_child_bus == 1) {
bus = QLIST_FIRST(&dev->child_bus);
break;
}
if (dev->num_child_bus) {
error_setg(errp, "Device '%s' has multiple child buses",
elem);
qbus_error_append_bus_list_hint(dev, errp);
} else {
error_setg(errp, "Device '%s' has no child bus", elem);
}
return NULL;
}
/* find bus */
if (sscanf(path+pos, "%127[^/]%n", elem, &len) != 1) {
g_assert_not_reached();
elem[0] = len = 0;
}
pos += len;
bus = qbus_find_bus(dev, elem);
if (!bus) {
error_setg(errp, "Bus '%s' not found", elem);
qbus_error_append_bus_list_hint(dev, errp);
return NULL;
}
}
if (qbus_is_full(bus)) {
error_setg(errp, "Bus '%s' is full", path);
return NULL;
}
return bus;
}
/* Takes ownership of @id, will be freed when deleting the device */
const char *qdev_set_id(DeviceState *dev, char *id, Error **errp)
{
ObjectProperty *prop;
assert(!dev->id && !dev->realized);
/*
* object_property_[try_]add_child() below will assert the device
* has no parent
*/
if (id) {
prop = object_property_try_add_child(qdev_get_peripheral(), id,
OBJECT(dev), NULL);
if (prop) {
dev->id = id;
} else {
error_setg(errp, "Duplicate device ID '%s'", id);
g_free(id);
return NULL;
}
} else {
static int anon_count;
gchar *name = g_strdup_printf("device[%d]", anon_count++);
prop = object_property_add_child(qdev_get_peripheral_anon(), name,
OBJECT(dev));
g_free(name);
}
return prop->name;
}
DeviceState *qdev_device_add_from_qdict(const QDict *opts,
bool from_json, Error **errp)
{
ERRP_GUARD();
DeviceClass *dc;
const char *driver, *path;
char *id;
2019-10-29 12:48:55 +01:00
DeviceState *dev = NULL;
BusState *bus = NULL;
driver = qdict_get_try_str(opts, "driver");
if (!driver) {
error_setg(errp, QERR_MISSING_PARAMETER, "driver");
return NULL;
}
/* find driver */
dc = qdev_get_device_class(&driver, errp);
if (!dc) {
return NULL;
}
/* find bus */
path = qdict_get_try_str(opts, "bus");
if (path != NULL) {
bus = qbus_find(path, errp);
if (!bus) {
return NULL;
}
if (!object_dynamic_cast(OBJECT(bus), dc->bus_type)) {
error_setg(errp, "Device '%s' can't go on %s bus",
driver, object_get_typename(OBJECT(bus)));
return NULL;
}
} else if (dc->bus_type != NULL) {
bus = qbus_find_recursive(sysbus_get_default(), NULL, dc->bus_type);
if (!bus || qbus_is_full(bus)) {
error_setg(errp, "No '%s' bus found for device '%s'",
dc->bus_type, driver);
return NULL;
}
}
2019-10-29 12:48:55 +01:00
if (qdev_should_hide_device(opts, from_json, errp)) {
if (bus && !qbus_is_hotpluggable(bus)) {
error_setg(errp, QERR_BUS_NO_HOTPLUG, bus->name);
}
return NULL;
} else if (*errp) {
return NULL;
}
if (phase_check(PHASE_MACHINE_READY) && bus && !qbus_is_hotpluggable(bus)) {
error_setg(errp, QERR_BUS_NO_HOTPLUG, bus->name);
2019-10-29 12:48:55 +01:00
return NULL;
}
if (!migration_is_idle()) {
error_setg(errp, "device_add not allowed while migrating");
return NULL;
}
/* create device */
dev = qdev_new(driver);
/* Check whether the hotplug is allowed by the machine */
if (phase_check(PHASE_MACHINE_READY)) {
if (!qdev_hotplug_allowed(dev, errp)) {
goto err_del_dev;
}
if (!bus && !qdev_get_machine_hotplug_handler(dev)) {
/* No bus, no machine hotplug handler --> device is not hotpluggable */
error_setg(errp, "Device '%s' can not be hotplugged on this machine",
driver);
goto err_del_dev;
}
}
/*
* set dev's parent and register its id.
* If it fails it means the id is already taken.
*/
id = g_strdup(qdict_get_try_str(opts, "id"));
if (!qdev_set_id(dev, id, errp)) {
goto err_del_dev;
}
/* set properties */
dev->opts = qdict_clone_shallow(opts);
qdict_del(dev->opts, "driver");
qdict_del(dev->opts, "bus");
qdict_del(dev->opts, "id");
object_set_properties_from_keyval(&dev->parent_obj, dev->opts, from_json,
errp);
if (*errp) {
goto err_del_dev;
}
if (!qdev_realize(DEVICE(dev), bus, errp)) {
goto err_del_dev;
}
return dev;
err_del_dev:
2019-10-29 12:48:55 +01:00
if (dev) {
object_unparent(OBJECT(dev));
object_unref(OBJECT(dev));
}
return NULL;
}
/* Takes ownership of @opts on success */
DeviceState *qdev_device_add(QemuOpts *opts, Error **errp)
{
QDict *qdict = qemu_opts_to_qdict(opts, NULL);
DeviceState *ret;
ret = qdev_device_add_from_qdict(qdict, false, errp);
if (ret) {
qemu_opts_del(opts);
}
qobject_unref(qdict);
return ret;
}
#define qdev_printf(fmt, ...) monitor_printf(mon, "%*s" fmt, indent, "", ## __VA_ARGS__)
static void qbus_print(Monitor *mon, BusState *bus, int indent);
static void qdev_print_props(Monitor *mon, DeviceState *dev, Property *props,
int indent)
{
if (!props)
return;
for (; props->name; props++) {
char *value;
char *legacy_name = g_strdup_printf("legacy-%s", props->name);
if (object_property_get_type(OBJECT(dev), legacy_name, NULL)) {
value = object_property_get_str(OBJECT(dev), legacy_name, NULL);
} else {
value = object_property_print(OBJECT(dev), props->name, true,
NULL);
}
g_free(legacy_name);
if (!value) {
continue;
}
qdev_printf("%s = %s\n", props->name,
*value ? value : "<null>");
g_free(value);
}
}
static void bus_print_dev(BusState *bus, Monitor *mon, DeviceState *dev, int indent)
{
BusClass *bc = BUS_GET_CLASS(bus);
if (bc->print_dev) {
bc->print_dev(mon, dev, indent);
}
}
static void qdev_print(Monitor *mon, DeviceState *dev, int indent)
{
ObjectClass *class;
BusState *child;
NamedGPIOList *ngl;
NamedClockList *ncl;
qdev_printf("dev: %s, id \"%s\"\n", object_get_typename(OBJECT(dev)),
dev->id ? dev->id : "");
indent += 2;
QLIST_FOREACH(ngl, &dev->gpios, node) {
if (ngl->num_in) {
qdev_printf("gpio-in \"%s\" %d\n", ngl->name ? ngl->name : "",
ngl->num_in);
}
if (ngl->num_out) {
qdev_printf("gpio-out \"%s\" %d\n", ngl->name ? ngl->name : "",
ngl->num_out);
}
}
QLIST_FOREACH(ncl, &dev->clocks, node) {
g_autofree char *freq_str = clock_display_freq(ncl->clock);
qdev_printf("clock-%s%s \"%s\" freq_hz=%s\n",
ncl->output ? "out" : "in",
ncl->alias ? " (alias)" : "",
ncl->name, freq_str);
}
class = object_get_class(OBJECT(dev));
do {
qdev_print_props(mon, dev, DEVICE_CLASS(class)->props_, indent);
class = object_class_get_parent(class);
} while (class != object_class_by_name(TYPE_DEVICE));
bus_print_dev(dev->parent_bus, mon, dev, indent);
QLIST_FOREACH(child, &dev->child_bus, sibling) {
qbus_print(mon, child, indent);
}
}
static void qbus_print(Monitor *mon, BusState *bus, int indent)
{
BusChild *kid;
qdev_printf("bus: %s\n", bus->name);
indent += 2;
qdev_printf("type %s\n", object_get_typename(OBJECT(bus)));
QTAILQ_FOREACH(kid, &bus->children, sibling) {
DeviceState *dev = kid->child;
qdev_print(mon, dev, indent);
}
}
#undef qdev_printf
void hmp_info_qtree(Monitor *mon, const QDict *qdict)
{
if (sysbus_get_default())
qbus_print(mon, sysbus_get_default(), 0);
}
void hmp_info_qdm(Monitor *mon, const QDict *qdict)
{
qdev_print_devinfos(true);
}
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
void qmp_device_add(QDict *qdict, QObject **ret_data, Error **errp)
{
QemuOpts *opts;
DeviceState *dev;
opts = qemu_opts_from_qdict(qemu_find_opts("device"), qdict, errp);
if (!opts) {
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
return;
}
if (!monitor_cur_is_qmp() && qdev_device_help(opts)) {
qemu_opts_del(opts);
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
return;
}
error: Eliminate error_propagate() with Coccinelle, part 1 When all we do with an Error we receive into a local variable is propagating to somewhere else, we can just as well receive it there right away. Convert if (!foo(..., &err)) { ... error_propagate(errp, err); ... return ... } to if (!foo(..., errp)) { ... ... return ... } where nothing else needs @err. Coccinelle script: @rule1 forall@ identifier fun, err, errp, lbl; expression list args, args2; binary operator op; constant c1, c2; symbol false; @@ if ( ( - fun(args, &err, args2) + fun(args, errp, args2) | - !fun(args, &err, args2) + !fun(args, errp, args2) | - fun(args, &err, args2) op c1 + fun(args, errp, args2) op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; ) } @rule2 forall@ identifier fun, err, errp, lbl; expression list args, args2; expression var; binary operator op; constant c1, c2; symbol false; @@ - var = fun(args, &err, args2); + var = fun(args, errp, args2); ... when != err if ( ( var | !var | var op c1 ) ) { ... when != err when != lbl: when strict - error_propagate(errp, err); ... when != err ( return; | return c2; | return false; | return var; ) } @depends on rule1 || rule2@ identifier err; @@ - Error *err = NULL; ... when != err Not exactly elegant, I'm afraid. The "when != lbl:" is necessary to avoid transforming if (fun(args, &err)) { goto out } ... out: error_propagate(errp, err); even though other paths to label out still need the error_propagate(). For an actual example, see sclp_realize(). Without the "when strict", Coccinelle transforms vfio_msix_setup(), incorrectly. I don't know what exactly "when strict" does, only that it helps here. The match of return is narrower than what I want, but I can't figure out how to express "return where the operand doesn't use @err". For an example where it's too narrow, see vfio_intx_enable(). Silently fails to convert hw/arm/armsse.c, because Coccinelle gets confused by ARMSSE being used both as typedef and function-like macro there. Converted manually. Line breaks tidied up manually. One nested declaration of @local_err deleted manually. Preexisting unwanted blank line dropped in hw/riscv/sifive_e.c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200707160613.848843-35-armbru@redhat.com>
2020-07-07 18:06:02 +02:00
dev = qdev_device_add(opts, errp);
/*
* Drain all pending RCU callbacks. This is done because
* some bus related operations can delay a device removal
* (in this case this can happen if device is added and then
* removed due to a configuration error)
* to a RCU callback, but user might expect that this interface
* will finish its job completely once qmp command returns result
* to the user
*/
drain_call_rcu();
if (!dev) {
qemu_opts_del(opts);
qmp: Wean off qerror_report() The traditional QMP command handler interface int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data); doesn't provide for returning an Error object. Instead, the handler is expected to stash it in the monitor with qerror_report(). When we rebased QMP on top of QAPI, we didn't change this interface. Instead, commit 776574d introduced "middle mode" as a temporary aid for converting existing QMP commands to QAPI one by one. More than three years later, we're still using it. Middle mode has two effects: * Instead of the native input marshallers static void qmp_marshal_input_FOO(QDict *, QObject **, Error **) it generates input marshallers conforming to the traditional QMP command handler interface. * It suppresses generation of code to register them with qmp_register_command() This permits giving them internal linkage. As long as we need qmp-commands.hx, we can't use the registry behind qmp_register_command(), so the latter has to stay for now. The former has to go to get rid of qerror_report(). Changing all QMP commands to fit the QAPI mold in one go was impractical back when we started, but by now there are just a few stragglers left: do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(), qmp_netdev_add(), do_device_add(). Switch middle mode to generate native input marshallers, and adapt the stragglers. Simplifies both the monitor code and the stragglers. Rename do_qmp_capabilities() to qmp_capabilities(), and do_device_add() to qmp_device_add, because that's how QMP command handlers are named today. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-13 17:25:50 +01:00
return;
}
object_unref(OBJECT(dev));
}
static DeviceState *find_device_state(const char *id, Error **errp)
{
Object *obj = object_resolve_path_at(qdev_get_peripheral(), id);
DeviceState *dev;
if (!obj) {
error_set(errp, ERROR_CLASS_DEVICE_NOT_FOUND,
"Device '%s' not found", id);
return NULL;
}
dev = (DeviceState *)object_dynamic_cast(obj, TYPE_DEVICE);
if (!dev) {
error_setg(errp, "%s is not a hotpluggable device", id);
return NULL;
}
return dev;
}
void qdev_unplug(DeviceState *dev, Error **errp)
{
DeviceClass *dc = DEVICE_GET_CLASS(dev);
HotplugHandler *hotplug_ctrl;
HotplugHandlerClass *hdc;
qdev: Let the hotplug_handler_unplug() caller delete the device When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-02-28 13:28:47 +01:00
Error *local_err = NULL;
if (dev->parent_bus && !qbus_is_hotpluggable(dev->parent_bus)) {
error_setg(errp, QERR_BUS_NO_HOTPLUG, dev->parent_bus->name);
return;
}
if (!dc->hotpluggable) {
error_setg(errp, QERR_DEVICE_NO_HOTPLUG,
object_get_typename(OBJECT(dev)));
return;
}
if (!migration_is_idle() && !dev->allow_unplug_during_migration) {
error_setg(errp, "device_del not allowed while migrating");
return;
}
qdev_hot_removed = true;
hotplug_ctrl = qdev_get_hotplug_handler(dev);
/* hotpluggable device MUST have HotplugHandler, if it doesn't
* then something is very wrong with it */
g_assert(hotplug_ctrl);
/* If device supports async unplug just request it to be done,
* otherwise just remove it synchronously */
hdc = HOTPLUG_HANDLER_GET_CLASS(hotplug_ctrl);
if (hdc->unplug_request) {
qdev: Let the hotplug_handler_unplug() caller delete the device When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-02-28 13:28:47 +01:00
hotplug_handler_unplug_request(hotplug_ctrl, dev, &local_err);
} else {
qdev: Let the hotplug_handler_unplug() caller delete the device When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-02-28 13:28:47 +01:00
hotplug_handler_unplug(hotplug_ctrl, dev, &local_err);
if (!local_err) {
object_unparent(OBJECT(dev));
}
}
qdev: Let the hotplug_handler_unplug() caller delete the device When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-02-28 13:28:47 +01:00
error_propagate(errp, local_err);
}
void qmp_device_del(const char *id, Error **errp)
{
DeviceState *dev = find_device_state(id, errp);
if (dev != NULL) {
if (dev->pending_deleted_event &&
(dev->pending_deleted_expires_ms == 0 ||
dev->pending_deleted_expires_ms > qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL))) {
error_setg(errp, "Device %s is already in the "
"process of unplug", id);
return;
}
qdev_unplug(dev, errp);
}
}
void hmp_device_add(Monitor *mon, const QDict *qdict)
{
Error *err = NULL;
qmp_device_add((QDict *)qdict, NULL, &err);
hmp_handle_error(mon, err);
}
void hmp_device_del(Monitor *mon, const QDict *qdict)
{
const char *id = qdict_get_str(qdict, "id");
Error *err = NULL;
qmp_device_del(id, &err);
hmp_handle_error(mon, err);
}
BlockBackend *blk_by_qdev_id(const char *id, Error **errp)
{
DeviceState *dev;
BlockBackend *blk;
GLOBAL_STATE_CODE();
dev = find_device_state(id, errp);
if (dev == NULL) {
return NULL;
}
blk = blk_by_dev(dev);
if (!blk) {
error_setg(errp, "Device does not have a block device backend");
}
return blk;
}
QemuOptsList qemu_device_opts = {
.name = "device",
.implied_opt_name = "driver",
.head = QTAILQ_HEAD_INITIALIZER(qemu_device_opts.head),
.desc = {
/*
* no elements => accept any
* sanity checking will happen later
* when setting device properties
*/
{ /* end of list */ }
},
};
QemuOptsList qemu_global_opts = {
.name = "global",
.head = QTAILQ_HEAD_INITIALIZER(qemu_global_opts.head),
.desc = {
{
.name = "driver",
.type = QEMU_OPT_STRING,
},{
.name = "property",
.type = QEMU_OPT_STRING,
},{
.name = "value",
.type = QEMU_OPT_STRING,
},
{ /* end of list */ }
},
};
int qemu_global_option(const char *str)
{
char driver[64], property[64];
QemuOpts *opts;
int rc, offset;
rc = sscanf(str, "%63[^.=].%63[^=]%n", driver, property, &offset);
if (rc == 2 && str[offset] == '=') {
opts = qemu_opts_create(&qemu_global_opts, NULL, 0, &error_abort);
qemu_opt_set(opts, "driver", driver, &error_abort);
qemu_opt_set(opts, "property", property, &error_abort);
qemu_opt_set(opts, "value", str + offset + 1, &error_abort);
return 0;
}
QemuOpts: Wean off qerror_report_err() qerror_report_err() is a transitional interface to help with converting existing monitor commands to QMP. It should not be used elsewhere. The only remaining user in qemu-option.c is qemu_opts_parse(). Is it used in QMP context? If not, we can simply replace qerror_report_err() by error_report_err(). The uses in qemu-img.c, qemu-io.c, qemu-nbd.c and under tests/ are clearly not in QMP context. The uses in vl.c aren't either, because the only QMP command handlers there are qmp_query_status() and qmp_query_machines(), and they don't call it. Remaining uses: * drive_def(): Command line -drive and such, HMP drive_add and pci_add * hmp_chardev_add(): HMP chardev-add * monitor_parse_command(): HMP core * tmp_config_parse(): Command line -tpmdev * net_host_device_add(): HMP host_net_add * net_client_parse(): Command line -net and -netdev * qemu_global_option(): Command line -global * vnc_parse_func(): Command line -display, -vnc, default display, HMP change, QMP change. Bummer. * qemu_pci_hot_add_nic(): HMP pci_add * usb_net_init(): Command line -usbdevice, HMP usb_add Propagate errors through qemu_opts_parse(). Create a convenience function qemu_opts_parse_noisily() that passes errors to error_report_err(). Switch all non-QMP users outside tests to it. That leaves vnc_parse_func(). Propagate errors through it. Since I'm touching it anyway, rename it to vnc_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-13 12:50:26 +01:00
opts = qemu_opts_parse_noisily(&qemu_global_opts, str, false);
if (!opts) {
return -1;
}
if (!qemu_opt_get(opts, "driver")
|| !qemu_opt_get(opts, "property")
|| !qemu_opt_get(opts, "value")) {
error_report("options 'driver', 'property', and 'value'"
" are required");
return -1;
}
return 0;
}
bool qmp_command_available(const QmpCommand *cmd, Error **errp)
{
if (!phase_check(PHASE_MACHINE_READY) &&
!(cmd->options & QCO_ALLOW_PRECONFIG)) {
error_setg(errp, "The command '%s' is permitted only after machine initialization has completed",
cmd->name);
return false;
}
return true;
}