qemu-e2k/hw/ppc/pnv_lpc.c

843 lines
26 KiB
C
Raw Normal View History

ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
/*
* QEMU PowerPC PowerNV LPC controller
*
* Copyright (c) 2016, IBM Corporation.
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "target/ppc/cpu.h"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#include "qapi/error.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "hw/irq.h"
#include "hw/isa/isa.h"
#include "hw/qdev-properties.h"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#include "hw/ppc/pnv.h"
#include "hw/ppc/pnv_lpc.h"
#include "hw/ppc/pnv_xscom.h"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#include "hw/ppc/fdt.h"
#include <libfdt.h>
enum {
ECCB_CTL = 0,
ECCB_RESET = 1,
ECCB_STAT = 2,
ECCB_DATA = 3,
};
/* OPB Master LS registers */
#define OPB_MASTER_LS_ROUTE0 0x8
#define OPB_MASTER_LS_ROUTE1 0xC
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define OPB_MASTER_LS_IRQ_STAT 0x50
#define OPB_MASTER_IRQ_LPC 0x00000800
#define OPB_MASTER_LS_IRQ_MASK 0x54
#define OPB_MASTER_LS_IRQ_POL 0x58
#define OPB_MASTER_LS_IRQ_INPUT 0x5c
/* LPC HC registers */
#define LPC_HC_FW_SEG_IDSEL 0x24
#define LPC_HC_FW_RD_ACC_SIZE 0x28
#define LPC_HC_FW_RD_1B 0x00000000
#define LPC_HC_FW_RD_2B 0x01000000
#define LPC_HC_FW_RD_4B 0x02000000
#define LPC_HC_FW_RD_16B 0x04000000
#define LPC_HC_FW_RD_128B 0x07000000
#define LPC_HC_IRQSER_CTRL 0x30
#define LPC_HC_IRQSER_EN 0x80000000
#define LPC_HC_IRQSER_QMODE 0x40000000
#define LPC_HC_IRQSER_START_MASK 0x03000000
#define LPC_HC_IRQSER_START_4CLK 0x00000000
#define LPC_HC_IRQSER_START_6CLK 0x01000000
#define LPC_HC_IRQSER_START_8CLK 0x02000000
#define LPC_HC_IRQMASK 0x34 /* same bit defs as LPC_HC_IRQSTAT */
#define LPC_HC_IRQSTAT 0x38
#define LPC_HC_IRQ_SERIRQ0 0x80000000 /* all bits down to ... */
#define LPC_HC_IRQ_SERIRQ16 0x00008000 /* IRQ16=IOCHK#, IRQ2=SMI# */
#define LPC_HC_IRQ_SERIRQ_ALL 0xffff8000
#define LPC_HC_IRQ_LRESET 0x00000400
#define LPC_HC_IRQ_SYNC_ABNORM_ERR 0x00000080
#define LPC_HC_IRQ_SYNC_NORESP_ERR 0x00000040
#define LPC_HC_IRQ_SYNC_NORM_ERR 0x00000020
#define LPC_HC_IRQ_SYNC_TIMEOUT_ERR 0x00000010
#define LPC_HC_IRQ_SYNC_TARG_TAR_ERR 0x00000008
#define LPC_HC_IRQ_SYNC_BM_TAR_ERR 0x00000004
#define LPC_HC_IRQ_SYNC_BM0_REQ 0x00000002
#define LPC_HC_IRQ_SYNC_BM1_REQ 0x00000001
#define LPC_HC_ERROR_ADDRESS 0x40
#define LPC_OPB_SIZE 0x100000000ull
#define ISA_IO_SIZE 0x00010000
#define ISA_MEM_SIZE 0x10000000
#define ISA_FW_SIZE 0x10000000
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define LPC_IO_OPB_ADDR 0xd0010000
#define LPC_IO_OPB_SIZE 0x00010000
#define LPC_MEM_OPB_ADDR 0xe0000000
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define LPC_MEM_OPB_SIZE 0x10000000
#define LPC_FW_OPB_ADDR 0xf0000000
#define LPC_FW_OPB_SIZE 0x10000000
#define LPC_OPB_REGS_OPB_ADDR 0xc0010000
#define LPC_OPB_REGS_OPB_SIZE 0x00000060
#define LPC_OPB_REGS_OPBA_ADDR 0xc0011000
#define LPC_OPB_REGS_OPBA_SIZE 0x00000008
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define LPC_HC_REGS_OPB_ADDR 0xc0012000
#define LPC_HC_REGS_OPB_SIZE 0x00000100
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
static int pnv_lpc_dt_xscom(PnvXScomInterface *dev, void *fdt, int xscom_offset)
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
{
const char compat[] = "ibm,power8-lpc\0ibm,lpc";
char *name;
int offset;
uint32_t lpc_pcba = PNV_XSCOM_LPC_BASE;
uint32_t reg[] = {
cpu_to_be32(lpc_pcba),
cpu_to_be32(PNV_XSCOM_LPC_SIZE)
};
name = g_strdup_printf("isa@%x", lpc_pcba);
offset = fdt_add_subnode(fdt, xscom_offset, name);
_FDT(offset);
g_free(name);
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2)));
_FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1)));
_FDT((fdt_setprop(fdt, offset, "compatible", compat, sizeof(compat))));
return 0;
}
/* POWER9 only */
int pnv_dt_lpc(PnvChip *chip, void *fdt, int root_offset, uint64_t lpcm_addr,
uint64_t lpcm_size)
{
const char compat[] = "ibm,power9-lpcm-opb\0simple-bus";
const char lpc_compat[] = "ibm,power9-lpc\0ibm,lpc";
char *name;
int offset, lpcm_offset;
uint32_t opb_ranges[8] = { 0,
cpu_to_be32(lpcm_addr >> 32),
cpu_to_be32((uint32_t)lpcm_addr),
cpu_to_be32(lpcm_size / 2),
cpu_to_be32(lpcm_size / 2),
cpu_to_be32(lpcm_addr >> 32),
cpu_to_be32(lpcm_size / 2),
cpu_to_be32(lpcm_size / 2),
};
uint32_t opb_reg[4] = { cpu_to_be32(lpcm_addr >> 32),
cpu_to_be32((uint32_t)lpcm_addr),
cpu_to_be32(lpcm_size >> 32),
cpu_to_be32((uint32_t)lpcm_size),
};
uint32_t lpc_ranges[12] = { 0, 0,
cpu_to_be32(LPC_MEM_OPB_ADDR),
cpu_to_be32(LPC_MEM_OPB_SIZE),
cpu_to_be32(1), 0,
cpu_to_be32(LPC_IO_OPB_ADDR),
cpu_to_be32(LPC_IO_OPB_SIZE),
cpu_to_be32(3), 0,
cpu_to_be32(LPC_FW_OPB_ADDR),
cpu_to_be32(LPC_FW_OPB_SIZE),
};
uint32_t reg[2];
/*
* OPB bus
*/
name = g_strdup_printf("lpcm-opb@%"PRIx64, lpcm_addr);
lpcm_offset = fdt_add_subnode(fdt, root_offset, name);
_FDT(lpcm_offset);
g_free(name);
_FDT((fdt_setprop(fdt, lpcm_offset, "reg", opb_reg, sizeof(opb_reg))));
_FDT((fdt_setprop_cell(fdt, lpcm_offset, "#address-cells", 1)));
_FDT((fdt_setprop_cell(fdt, lpcm_offset, "#size-cells", 1)));
_FDT((fdt_setprop(fdt, lpcm_offset, "compatible", compat, sizeof(compat))));
_FDT((fdt_setprop_cell(fdt, lpcm_offset, "ibm,chip-id", chip->chip_id)));
_FDT((fdt_setprop(fdt, lpcm_offset, "ranges", opb_ranges,
sizeof(opb_ranges))));
/*
* OPB Master registers
*/
name = g_strdup_printf("opb-master@%x", LPC_OPB_REGS_OPB_ADDR);
offset = fdt_add_subnode(fdt, lpcm_offset, name);
_FDT(offset);
g_free(name);
reg[0] = cpu_to_be32(LPC_OPB_REGS_OPB_ADDR);
reg[1] = cpu_to_be32(LPC_OPB_REGS_OPB_SIZE);
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop_string(fdt, offset, "compatible",
"ibm,power9-lpcm-opb-master")));
/*
* OPB arbitrer registers
*/
name = g_strdup_printf("opb-arbitrer@%x", LPC_OPB_REGS_OPBA_ADDR);
offset = fdt_add_subnode(fdt, lpcm_offset, name);
_FDT(offset);
g_free(name);
reg[0] = cpu_to_be32(LPC_OPB_REGS_OPBA_ADDR);
reg[1] = cpu_to_be32(LPC_OPB_REGS_OPBA_SIZE);
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop_string(fdt, offset, "compatible",
"ibm,power9-lpcm-opb-arbiter")));
/*
* LPC Host Controller registers
*/
name = g_strdup_printf("lpc-controller@%x", LPC_HC_REGS_OPB_ADDR);
offset = fdt_add_subnode(fdt, lpcm_offset, name);
_FDT(offset);
g_free(name);
reg[0] = cpu_to_be32(LPC_HC_REGS_OPB_ADDR);
reg[1] = cpu_to_be32(LPC_HC_REGS_OPB_SIZE);
_FDT((fdt_setprop(fdt, offset, "reg", reg, sizeof(reg))));
_FDT((fdt_setprop_string(fdt, offset, "compatible",
"ibm,power9-lpc-controller")));
name = g_strdup_printf("lpc@0");
offset = fdt_add_subnode(fdt, lpcm_offset, name);
_FDT(offset);
g_free(name);
_FDT((fdt_setprop_cell(fdt, offset, "#address-cells", 2)));
_FDT((fdt_setprop_cell(fdt, offset, "#size-cells", 1)));
_FDT((fdt_setprop(fdt, offset, "compatible", lpc_compat,
sizeof(lpc_compat))));
_FDT((fdt_setprop(fdt, offset, "ranges", lpc_ranges,
sizeof(lpc_ranges))));
return 0;
}
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
/*
* These read/write handlers of the OPB address space should be common
* with the P9 LPC Controller which uses direct MMIOs.
*
* TODO: rework to use address_space_stq() and address_space_ldq()
* instead.
*/
static bool opb_read(PnvLpcController *lpc, uint32_t addr, uint8_t *data,
int sz)
{
/* XXX Handle access size limits and FW read caching here */
Avoid address_space_rw() with a constant is_write argument The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-18 12:24:57 +01:00
return !address_space_read(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED,
data, sz);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
}
static bool opb_write(PnvLpcController *lpc, uint32_t addr, uint8_t *data,
int sz)
{
/* XXX Handle access size limits here */
Avoid address_space_rw() with a constant is_write argument The address_space_rw() function allows either reads or writes depending on the is_write argument passed to it; this is useful when the direction of the access is determined programmatically (as for instance when handling the KVM_EXIT_MMIO exit reason). Under the hood it just calls either address_space_write() or address_space_read_full(). We also use it a lot with a constant is_write argument, though, which has two issues: * when reading "address_space_rw(..., 1)" this is less immediately clear to the reader as being a write than "address_space_write(...)" * calling address_space_rw() bypasses the optimization in address_space_read() that fast-paths reads of a fixed length This commit was produced with the included Coccinelle script scripts/coccinelle/exec_rw_const.cocci. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200218112457.22712-1-peter.maydell@linaro.org> [PMD: Update macvm_set_cr0() reported by Laurent Vivier] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-02-18 12:24:57 +01:00
return !address_space_write(&lpc->opb_as, addr, MEMTXATTRS_UNSPECIFIED,
data, sz);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
}
#define ECCB_CTL_READ PPC_BIT(15)
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define ECCB_CTL_SZ_LSH (63 - 7)
#define ECCB_CTL_SZ_MASK PPC_BITMASK(4, 7)
#define ECCB_CTL_ADDR_MASK PPC_BITMASK(32, 63)
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define ECCB_STAT_OP_DONE PPC_BIT(52)
#define ECCB_STAT_OP_ERR PPC_BIT(52)
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
#define ECCB_STAT_RD_DATA_LSH (63 - 37)
#define ECCB_STAT_RD_DATA_MASK (0xffffffff << ECCB_STAT_RD_DATA_LSH)
static void pnv_lpc_do_eccb(PnvLpcController *lpc, uint64_t cmd)
{
/* XXX Check for magic bits at the top, addr size etc... */
unsigned int sz = (cmd & ECCB_CTL_SZ_MASK) >> ECCB_CTL_SZ_LSH;
uint32_t opb_addr = cmd & ECCB_CTL_ADDR_MASK;
uint8_t data[8];
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
bool success;
if (sz > sizeof(data)) {
qemu_log_mask(LOG_GUEST_ERROR,
"ECCB: invalid operation at @0x%08x size %d\n", opb_addr, sz);
return;
}
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
if (cmd & ECCB_CTL_READ) {
success = opb_read(lpc, opb_addr, data, sz);
if (success) {
lpc->eccb_stat_reg = ECCB_STAT_OP_DONE |
(((uint64_t)data[0]) << 24 |
((uint64_t)data[1]) << 16 |
((uint64_t)data[2]) << 8 |
((uint64_t)data[3])) << ECCB_STAT_RD_DATA_LSH;
} else {
lpc->eccb_stat_reg = ECCB_STAT_OP_DONE |
(0xffffffffull << ECCB_STAT_RD_DATA_LSH);
}
} else {
data[0] = lpc->eccb_data_reg >> 24;
data[1] = lpc->eccb_data_reg >> 16;
data[2] = lpc->eccb_data_reg >> 8;
data[3] = lpc->eccb_data_reg;
success = opb_write(lpc, opb_addr, data, sz);
lpc->eccb_stat_reg = ECCB_STAT_OP_DONE;
}
/* XXX Which error bit (if any) to signal OPB error ? */
}
static uint64_t pnv_lpc_xscom_read(void *opaque, hwaddr addr, unsigned size)
{
PnvLpcController *lpc = PNV_LPC(opaque);
uint32_t offset = addr >> 3;
uint64_t val = 0;
switch (offset & 3) {
case ECCB_CTL:
case ECCB_RESET:
val = 0;
break;
case ECCB_STAT:
val = lpc->eccb_stat_reg;
lpc->eccb_stat_reg = 0;
break;
case ECCB_DATA:
val = ((uint64_t)lpc->eccb_data_reg) << 32;
break;
}
return val;
}
static void pnv_lpc_xscom_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PnvLpcController *lpc = PNV_LPC(opaque);
uint32_t offset = addr >> 3;
switch (offset & 3) {
case ECCB_CTL:
pnv_lpc_do_eccb(lpc, val);
break;
case ECCB_RESET:
/* XXXX */
break;
case ECCB_STAT:
break;
case ECCB_DATA:
lpc->eccb_data_reg = val >> 32;
break;
}
}
static const MemoryRegionOps pnv_lpc_xscom_ops = {
.read = pnv_lpc_xscom_read,
.write = pnv_lpc_xscom_write,
.valid.min_access_size = 8,
.valid.max_access_size = 8,
.impl.min_access_size = 8,
.impl.max_access_size = 8,
.endianness = DEVICE_BIG_ENDIAN,
};
static uint64_t pnv_lpc_mmio_read(void *opaque, hwaddr addr, unsigned size)
{
PnvLpcController *lpc = PNV_LPC(opaque);
uint64_t val = 0;
uint32_t opb_addr = addr & ECCB_CTL_ADDR_MASK;
MemTxResult result;
switch (size) {
case 4:
val = address_space_ldl(&lpc->opb_as, opb_addr, MEMTXATTRS_UNSPECIFIED,
&result);
break;
case 1:
val = address_space_ldub(&lpc->opb_as, opb_addr, MEMTXATTRS_UNSPECIFIED,
&result);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "OPB read failed at @0x%"
HWADDR_PRIx " invalid size %d\n", addr, size);
return 0;
}
if (result != MEMTX_OK) {
qemu_log_mask(LOG_GUEST_ERROR, "OPB read failed at @0x%"
HWADDR_PRIx "\n", addr);
}
return val;
}
static void pnv_lpc_mmio_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PnvLpcController *lpc = PNV_LPC(opaque);
uint32_t opb_addr = addr & ECCB_CTL_ADDR_MASK;
MemTxResult result;
switch (size) {
case 4:
address_space_stl(&lpc->opb_as, opb_addr, val, MEMTXATTRS_UNSPECIFIED,
&result);
break;
case 1:
address_space_stb(&lpc->opb_as, opb_addr, val, MEMTXATTRS_UNSPECIFIED,
&result);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR, "OPB write failed at @0x%"
HWADDR_PRIx " invalid size %d\n", addr, size);
return;
}
if (result != MEMTX_OK) {
qemu_log_mask(LOG_GUEST_ERROR, "OPB write failed at @0x%"
HWADDR_PRIx "\n", addr);
}
}
static const MemoryRegionOps pnv_lpc_mmio_ops = {
.read = pnv_lpc_mmio_read,
.write = pnv_lpc_mmio_write,
.impl = {
.min_access_size = 1,
.max_access_size = 4,
},
.endianness = DEVICE_BIG_ENDIAN,
};
static void pnv_lpc_eval_irqs(PnvLpcController *lpc)
{
bool lpc_to_opb_irq = false;
/* Update LPC controller to OPB line */
if (lpc->lpc_hc_irqser_ctrl & LPC_HC_IRQSER_EN) {
uint32_t irqs;
irqs = lpc->lpc_hc_irqstat & lpc->lpc_hc_irqmask;
lpc_to_opb_irq = (irqs != 0);
}
/* We don't honor the polarity register, it's pointless and unused
* anyway
*/
if (lpc_to_opb_irq) {
lpc->opb_irq_input |= OPB_MASTER_IRQ_LPC;
} else {
lpc->opb_irq_input &= ~OPB_MASTER_IRQ_LPC;
}
/* Update OPB internal latch */
lpc->opb_irq_stat |= lpc->opb_irq_input & lpc->opb_irq_mask;
/* Reflect the interrupt */
qemu_set_irq(lpc->psi_irq, lpc->opb_irq_stat != 0);
}
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
static uint64_t lpc_hc_read(void *opaque, hwaddr addr, unsigned size)
{
PnvLpcController *lpc = opaque;
uint64_t val = 0xfffffffffffffffful;
switch (addr) {
case LPC_HC_FW_SEG_IDSEL:
val = lpc->lpc_hc_fw_seg_idsel;
break;
case LPC_HC_FW_RD_ACC_SIZE:
val = lpc->lpc_hc_fw_rd_acc_size;
break;
case LPC_HC_IRQSER_CTRL:
val = lpc->lpc_hc_irqser_ctrl;
break;
case LPC_HC_IRQMASK:
val = lpc->lpc_hc_irqmask;
break;
case LPC_HC_IRQSTAT:
val = lpc->lpc_hc_irqstat;
break;
case LPC_HC_ERROR_ADDRESS:
val = lpc->lpc_hc_error_addr;
break;
default:
qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: 0x%"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
HWADDR_PRIx "\n", addr);
}
return val;
}
static void lpc_hc_write(void *opaque, hwaddr addr, uint64_t val,
unsigned size)
{
PnvLpcController *lpc = opaque;
/* XXX Filter out reserved bits */
switch (addr) {
case LPC_HC_FW_SEG_IDSEL:
/* XXX Actually figure out how that works as this impact
* memory regions/aliases
*/
lpc->lpc_hc_fw_seg_idsel = val;
break;
case LPC_HC_FW_RD_ACC_SIZE:
lpc->lpc_hc_fw_rd_acc_size = val;
break;
case LPC_HC_IRQSER_CTRL:
lpc->lpc_hc_irqser_ctrl = val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case LPC_HC_IRQMASK:
lpc->lpc_hc_irqmask = val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case LPC_HC_IRQSTAT:
lpc->lpc_hc_irqstat &= ~val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case LPC_HC_ERROR_ADDRESS:
break;
default:
qemu_log_mask(LOG_UNIMP, "LPC HC Unimplemented register: 0x%"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
HWADDR_PRIx "\n", addr);
}
}
static const MemoryRegionOps lpc_hc_ops = {
.read = lpc_hc_read,
.write = lpc_hc_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static uint64_t opb_master_read(void *opaque, hwaddr addr, unsigned size)
{
PnvLpcController *lpc = opaque;
uint64_t val = 0xfffffffffffffffful;
switch (addr) {
case OPB_MASTER_LS_ROUTE0: /* TODO */
val = lpc->opb_irq_route0;
break;
case OPB_MASTER_LS_ROUTE1: /* TODO */
val = lpc->opb_irq_route1;
break;
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
case OPB_MASTER_LS_IRQ_STAT:
val = lpc->opb_irq_stat;
break;
case OPB_MASTER_LS_IRQ_MASK:
val = lpc->opb_irq_mask;
break;
case OPB_MASTER_LS_IRQ_POL:
val = lpc->opb_irq_pol;
break;
case OPB_MASTER_LS_IRQ_INPUT:
val = lpc->opb_irq_input;
break;
default:
qemu_log_mask(LOG_UNIMP, "OPBM: read on unimplemented register: 0x%"
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
HWADDR_PRIx "\n", addr);
}
return val;
}
static void opb_master_write(void *opaque, hwaddr addr,
uint64_t val, unsigned size)
{
PnvLpcController *lpc = opaque;
switch (addr) {
case OPB_MASTER_LS_ROUTE0: /* TODO */
lpc->opb_irq_route0 = val;
break;
case OPB_MASTER_LS_ROUTE1: /* TODO */
lpc->opb_irq_route1 = val;
break;
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
case OPB_MASTER_LS_IRQ_STAT:
lpc->opb_irq_stat &= ~val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case OPB_MASTER_LS_IRQ_MASK:
lpc->opb_irq_mask = val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case OPB_MASTER_LS_IRQ_POL:
lpc->opb_irq_pol = val;
pnv_lpc_eval_irqs(lpc);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
break;
case OPB_MASTER_LS_IRQ_INPUT:
/* Read only */
break;
default:
qemu_log_mask(LOG_UNIMP, "OPBM: write on unimplemented register: 0x%"
HWADDR_PRIx " val=0x%08"PRIx64"\n", addr, val);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
}
}
static const MemoryRegionOps opb_master_ops = {
.read = opb_master_read,
.write = opb_master_write,
.endianness = DEVICE_BIG_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 4,
},
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
};
static void pnv_lpc_power8_realize(DeviceState *dev, Error **errp)
{
PnvLpcController *lpc = PNV_LPC(dev);
PnvLpcClass *plc = PNV_LPC_GET_CLASS(dev);
Error *local_err = NULL;
plc->parent_realize(dev, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
/* P8 uses a XSCOM region for LPC registers */
pnv_xscom_region_init(&lpc->xscom_regs, OBJECT(lpc),
&pnv_lpc_xscom_ops, lpc, "xscom-lpc",
PNV_XSCOM_LPC_SIZE);
}
static void pnv_lpc_power8_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvXScomInterfaceClass *xdc = PNV_XSCOM_INTERFACE_CLASS(klass);
PnvLpcClass *plc = PNV_LPC_CLASS(klass);
dc->desc = "PowerNV LPC Controller POWER8";
xdc->dt_xscom = pnv_lpc_dt_xscom;
device_class_set_parent_realize(dc, pnv_lpc_power8_realize,
&plc->parent_realize);
}
static const TypeInfo pnv_lpc_power8_info = {
.name = TYPE_PNV8_LPC,
.parent = TYPE_PNV_LPC,
.class_init = pnv_lpc_power8_class_init,
.interfaces = (InterfaceInfo[]) {
{ TYPE_PNV_XSCOM_INTERFACE },
{ }
}
};
static void pnv_lpc_power9_realize(DeviceState *dev, Error **errp)
{
PnvLpcController *lpc = PNV_LPC(dev);
PnvLpcClass *plc = PNV_LPC_GET_CLASS(dev);
Error *local_err = NULL;
plc->parent_realize(dev, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
/* P9 uses a MMIO region */
memory_region_init_io(&lpc->xscom_regs, OBJECT(lpc), &pnv_lpc_mmio_ops,
lpc, "lpcm", PNV9_LPCM_SIZE);
}
static void pnv_lpc_power9_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
PnvLpcClass *plc = PNV_LPC_CLASS(klass);
dc->desc = "PowerNV LPC Controller POWER9";
device_class_set_parent_realize(dc, pnv_lpc_power9_realize,
&plc->parent_realize);
}
static const TypeInfo pnv_lpc_power9_info = {
.name = TYPE_PNV9_LPC,
.parent = TYPE_PNV_LPC,
.class_init = pnv_lpc_power9_class_init,
};
static void pnv_lpc_power10_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->desc = "PowerNV LPC Controller POWER10";
}
static const TypeInfo pnv_lpc_power10_info = {
.name = TYPE_PNV10_LPC,
.parent = TYPE_PNV9_LPC,
.class_init = pnv_lpc_power10_class_init,
};
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
static void pnv_lpc_realize(DeviceState *dev, Error **errp)
{
PnvLpcController *lpc = PNV_LPC(dev);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
/* Reg inits */
lpc->lpc_hc_fw_rd_acc_size = LPC_HC_FW_RD_4B;
/* Create address space and backing MR for the OPB bus */
memory_region_init(&lpc->opb_mr, OBJECT(dev), "lpc-opb", 0x100000000ull);
address_space_init(&lpc->opb_as, &lpc->opb_mr, "lpc-opb");
/* Create ISA IO and Mem space regions which are the root of
* the ISA bus (ie, ISA address spaces). We don't create a
* separate one for FW which we alias to memory.
*/
memory_region_init(&lpc->isa_io, OBJECT(dev), "isa-io", ISA_IO_SIZE);
memory_region_init(&lpc->isa_mem, OBJECT(dev), "isa-mem", ISA_MEM_SIZE);
memory_region_init(&lpc->isa_fw, OBJECT(dev), "isa-fw", ISA_FW_SIZE);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
/* Create windows from the OPB space to the ISA space */
memory_region_init_alias(&lpc->opb_isa_io, OBJECT(dev), "lpc-isa-io",
&lpc->isa_io, 0, LPC_IO_OPB_SIZE);
memory_region_add_subregion(&lpc->opb_mr, LPC_IO_OPB_ADDR,
&lpc->opb_isa_io);
memory_region_init_alias(&lpc->opb_isa_mem, OBJECT(dev), "lpc-isa-mem",
&lpc->isa_mem, 0, LPC_MEM_OPB_SIZE);
memory_region_add_subregion(&lpc->opb_mr, LPC_MEM_OPB_ADDR,
&lpc->opb_isa_mem);
memory_region_init_alias(&lpc->opb_isa_fw, OBJECT(dev), "lpc-isa-fw",
&lpc->isa_fw, 0, LPC_FW_OPB_SIZE);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
memory_region_add_subregion(&lpc->opb_mr, LPC_FW_OPB_ADDR,
&lpc->opb_isa_fw);
/* Create MMIO regions for LPC HC and OPB registers */
memory_region_init_io(&lpc->opb_master_regs, OBJECT(dev), &opb_master_ops,
lpc, "lpc-opb-master", LPC_OPB_REGS_OPB_SIZE);
memory_region_add_subregion(&lpc->opb_mr, LPC_OPB_REGS_OPB_ADDR,
&lpc->opb_master_regs);
memory_region_init_io(&lpc->lpc_hc_regs, OBJECT(dev), &lpc_hc_ops, lpc,
"lpc-hc", LPC_HC_REGS_OPB_SIZE);
memory_region_add_subregion(&lpc->opb_mr, LPC_HC_REGS_OPB_ADDR,
&lpc->lpc_hc_regs);
qdev_init_gpio_out(DEVICE(dev), &lpc->psi_irq, 1);
}
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
static void pnv_lpc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = pnv_lpc_realize;
dc->desc = "PowerNV LPC Controller";
dc->user_creatable = false;
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
}
static const TypeInfo pnv_lpc_info = {
.name = TYPE_PNV_LPC,
.parent = TYPE_DEVICE,
.instance_size = sizeof(PnvLpcController),
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
.class_init = pnv_lpc_class_init,
.class_size = sizeof(PnvLpcClass),
.abstract = true,
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
};
static void pnv_lpc_register_types(void)
{
type_register_static(&pnv_lpc_info);
type_register_static(&pnv_lpc_power8_info);
type_register_static(&pnv_lpc_power9_info);
type_register_static(&pnv_lpc_power10_info);
ppc/pnv: add a LPC controller The LPC (Low Pin Count) interface on a POWER8 is made accessible to the system through the ADU (XSCOM interface). This interface is part of set of units connected together via a local OPB (On-Chip Peripheral Bus) which act as a bridge between the ADU and the off chip LPC endpoints, like external flash modules. The most important units of this OPB are : - OPB Master: contains the ADU slave logic, a set of internal registers and the logic to control the OPB. - LPCHC (LPC HOST Controller): which implements a OPB Slave, a set of internal registers and the LPC HOST Controller to control the LPC interface. Four address spaces are provided to the ADU : - LPC Bus Firmware Memory - LPC Bus Memory - LPC Bus I/O (ISA bus) - and the registers for the OPB Master and the LPC Host Controller On POWER8, an intermediate hop is necessary to reach the OPB, through a unit called the ECCB. OPB commands are simply mangled in ECCB write commands. On POWER9, the OPB master address space can be accessed via MMIO. The logic is same but the code will be simpler as the XSCOM and ECCB hops are not necessary anymore. This version of the LPC controller model doesn't yet implement support for the SerIRQ deserializer present in the Naples version of the chip though some preliminary work is there. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: - updated for qemu-2.7 - ported on latest PowerNV patchset - changed the XSCOM interface to fit new model - QOMified the model - moved the ISA hunks in another patch - removed printf logging - added a couple of UNIMP logging - rewrote commit log ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-10-22 11:46:42 +02:00
}
type_init(pnv_lpc_register_types)
/* If we don't use the built-in LPC interrupt deserializer, we need
* to provide a set of qirqs for the ISA bus or things will go bad.
*
* Most machines using pre-Naples chips (without said deserializer)
* have a CPLD that will collect the SerIRQ and shoot them as a
* single level interrupt to the P8 chip. So let's setup a hook
* for doing just that.
*/
static void pnv_lpc_isa_irq_handler_cpld(void *opaque, int n, int level)
{
PnvMachineState *pnv = PNV_MACHINE(qdev_get_machine());
uint32_t old_state = pnv->cpld_irqstate;
PnvLpcController *lpc = PNV_LPC(opaque);
if (level) {
pnv->cpld_irqstate |= 1u << n;
} else {
pnv->cpld_irqstate &= ~(1u << n);
}
if (pnv->cpld_irqstate != old_state) {
qemu_set_irq(lpc->psi_irq, pnv->cpld_irqstate != 0);
}
}
static void pnv_lpc_isa_irq_handler(void *opaque, int n, int level)
{
PnvLpcController *lpc = PNV_LPC(opaque);
/* The Naples HW latches the 1 levels, clearing is done by SW */
if (level) {
lpc->lpc_hc_irqstat |= LPC_HC_IRQ_SERIRQ0 >> n;
pnv_lpc_eval_irqs(lpc);
}
}
ISABus *pnv_lpc_isa_create(PnvLpcController *lpc, bool use_cpld, Error **errp)
{
Error *local_err = NULL;
ISABus *isa_bus;
qemu_irq *irqs;
qemu_irq_handler handler;
/* let isa_bus_new() create its own bridge on SysBus otherwise
* devices specified on the command line won't find the bus and
* will fail to create.
*/
isa_bus = isa_bus_new(NULL, &lpc->isa_mem, &lpc->isa_io, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return NULL;
}
/* Not all variants have a working serial irq decoder. If not,
* handling of LPC interrupts becomes a platform issue (some
* platforms have a CPLD to do it).
*/
if (use_cpld) {
handler = pnv_lpc_isa_irq_handler_cpld;
} else {
handler = pnv_lpc_isa_irq_handler;
}
irqs = qemu_allocate_irqs(handler, lpc, ISA_NUM_IRQS);
isa_bus_irqs(isa_bus, irqs);
return isa_bus;
}