qemu-e2k/configure

4154 lines
112 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# qemu configure script (c) 2003 Fabrice Bellard
#
# Unset some variables known to interfere with behavior of common tools,
# just as autoconf does.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
# Don't allow CCACHE, if present, to use cached results of compile tests!
export CCACHE_RECACHE=yes
# make source path absolute
source_path=$(cd "$(dirname -- "$0")"; pwd)
if test "$PWD" = "$source_path"
then
echo "Using './build' as the directory for build output"
MARKER=build/auto-created-by-configure
if test -e build
then
if test -f $MARKER
then
rm -rf build
else
echo "ERROR: ./build dir already exists and was not previously created by configure"
exit 1
fi
fi
mkdir build
touch $MARKER
cat > GNUmakefile <<'EOF'
# This file is auto-generated by configure to support in-source tree
# 'make' command invocation
ifeq ($(MAKECMDGOALS),)
recurse: all
endif
.NOTPARALLEL: %
%: force
@echo 'changing dir to build for $(MAKE) "$(MAKECMDGOALS)"...'
@$(MAKE) -C build -f Makefile $(MAKECMDGOALS)
@if test "$(MAKECMDGOALS)" = "distclean" && \
test -e build/auto-created-by-configure ; \
then \
rm -rf build GNUmakefile ; \
fi
force: ;
.PHONY: force
GNUmakefile: ;
EOF
cd build
exec $source_path/configure "$@"
fi
# Temporary directory used for files created while
# configure runs. Since it is in the build directory
# we can safely blow away any previous version of it
# (and we need not jump through hoops to try to delete
# it when configure exits.)
TMPDIR1="config-temp"
rm -rf "${TMPDIR1}"
mkdir -p "${TMPDIR1}"
if [ $? -ne 0 ]; then
echo "ERROR: failed to create temporary directory"
exit 1
fi
TMPB="qemu-conf"
TMPC="${TMPDIR1}/${TMPB}.c"
TMPO="${TMPDIR1}/${TMPB}.o"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
TMPCXX="${TMPDIR1}/${TMPB}.cxx"
TMPE="${TMPDIR1}/${TMPB}.exe"
TMPTXT="${TMPDIR1}/${TMPB}.txt"
rm -f config.log
# Print a helpful header at the top of config.log
echo "# QEMU configure log $(date)" >> config.log
printf "# Configured with:" >> config.log
printf " '%s'" "$0" "$@" >> config.log
echo >> config.log
echo "#" >> config.log
quote_sh() {
printf "%s" "$1" | sed "s,','\\\\'',g; s,.*,'&',"
}
print_error() {
(echo
echo "ERROR: $1"
while test -n "$2"; do
echo " $2"
shift
done
echo) >&2
}
error_exit() {
print_error "$@"
exit 1
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
do_compiler() {
# Run the compiler, capturing its output to the log. First argument
# is compiler binary to execute.
compiler="$1"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
shift
if test -n "$BASH_VERSION"; then eval '
echo >>config.log "
funcs: ${FUNCNAME[*]}
lines: ${BASH_LINENO[*]}"
'; fi
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
echo $compiler "$@" >> config.log
$compiler "$@" >> config.log 2>&1 || return $?
# Test passed. If this is an --enable-werror build, rerun
# the test with -Werror and bail out if it fails. This
# makes warning-generating-errors in configure test code
# obvious to developers.
if test "$werror" != "yes"; then
return 0
fi
# Don't bother rerunning the compile if we were already using -Werror
case "$*" in
*-Werror*)
return 0
;;
esac
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
echo $compiler -Werror "$@" >> config.log
$compiler -Werror "$@" >> config.log 2>&1 && return $?
error_exit "configure test passed without -Werror but failed with -Werror." \
"This is probably a bug in the configure script. The failing command" \
"will be at the bottom of config.log." \
"You can run configure with --disable-werror to bypass this check."
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
do_cc() {
do_compiler "$cc" $CPU_CFLAGS "$@"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
}
do_cxx() {
do_compiler "$cxx" $CPU_CFLAGS "$@"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
}
# Append $2 to the variable named $1, with space separation
add_to() {
eval $1=\${$1:+\"\$$1 \"}\$2
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
update_cxxflags() {
# Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
# options which some versions of GCC's C++ compiler complain about
# because they only make sense for C programs.
QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS"
CONFIGURE_CXXFLAGS=$(echo "$CONFIGURE_CFLAGS" | sed s/-std=gnu11/-std=gnu++11/)
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
for arg in $QEMU_CFLAGS; do
case $arg in
-Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
-Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
;;
*)
QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
;;
esac
done
}
compile_object() {
local_cflags="$1"
do_cc $CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
}
compile_prog() {
local_cflags="$1"
local_ldflags="$2"
do_cc $CFLAGS $CONFIGURE_CFLAGS $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC \
$LDFLAGS $CONFIGURE_LDFLAGS $QEMU_LDFLAGS $local_ldflags
}
# symbolically link $1 to $2. Portable version of "ln -sf".
symlink() {
rm -rf "$2"
mkdir -p "$(dirname "$2")"
ln -s "$1" "$2"
}
# check whether a command is available to this shell (may be either an
# executable or a builtin)
has() {
type "$1" >/dev/null 2>&1
}
version_ge () {
local_ver1=$(expr "$1" : '\([0-9.]*\)' | tr . ' ')
local_ver2=$(echo "$2" | tr . ' ')
while true; do
set x $local_ver1
local_first=${2-0}
# 'shift 2' if $2 is set, or 'shift' if $2 is not set
shift ${2:+2}
local_ver1=$*
set x $local_ver2
# the second argument finished, the first must be greater or equal
test $# = 1 && return 0
test $local_first -lt $2 && return 1
test $local_first -gt $2 && return 0
shift ${2:+2}
local_ver2=$*
done
}
glob() {
eval test -z '"${1#'"$2"'}"'
}
ld_has() {
$ld --help 2>/dev/null | grep ".$1" >/dev/null 2>&1
}
if printf %s\\n "$source_path" "$PWD" | grep -q "[[:space:]:]";
then
error_exit "main directory cannot contain spaces nor colons"
fi
# default parameters
cpu=""
iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
cross_compile="no"
cross_prefix=""
audio_drv_list="default"
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
block_drv_whitelist_tools="no"
host_cc="cc"
libs_qga=""
debug_info="yes"
lto="false"
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
stack_protector=""
safe_stack=""
use_containers="yes"
gdb_bin=$(command -v "gdb-multiarch" || command -v "gdb")
if test -e "$source_path/.git"
then
git_submodules_action="update"
else
git_submodules_action="ignore"
fi
git_submodules="ui/keycodemapdb"
git="git"
# Don't accept a target_list environment variable.
unset target_list
unset target_list_exclude
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
# * foo="" feature will be searched for, and if found, will be used
# unless --disable-foo is given
# * foo="yes" this value will only be set by --enable-foo flag.
# feature will searched for,
# if not found, configure exits with error
#
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
default_feature=""
# parse CC options second
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--without-default-features)
default_feature="no"
;;
esac
done
xen_ctrl_version="$default_feature"
xfs="$default_feature"
membarrier="$default_feature"
vhost_kernel="$default_feature"
vhost_net="$default_feature"
vhost_crypto="$default_feature"
vhost_scsi="$default_feature"
vhost_vsock="$default_feature"
vhost_user="no"
vhost_user_fs="$default_feature"
vhost_vdpa="$default_feature"
rdma="$default_feature"
pvrdma="$default_feature"
gprof="no"
debug_tcg="no"
debug="no"
sanitizers="no"
tsan="no"
fortify_source="$default_feature"
strip_opt="yes"
mingw32="no"
gcov="no"
EXESUF=""
modules="no"
module_upgrades="no"
prefix="/usr/local"
qemu_suffix="qemu"
bsd="no"
linux="no"
solaris="no"
profiler="no"
softmmu="yes"
linux_user="no"
bsd_user="no"
pkgversion=""
pie=""
qom_cast_debug="yes"
trace_backends="log"
trace_file="trace"
opengl="$default_feature"
cpuid_h="no"
avx2_opt="$default_feature"
guest_agent="$default_feature"
guest_agent_with_vss="no"
guest_agent_ntddscsi="no"
vss_win32_sdk="$default_feature"
win_sdk="no"
want_tools="$default_feature"
coroutine=""
coroutine_pool="$default_feature"
debug_stack_usage="no"
crypto_afalg="no"
tls_priority="NORMAL"
tpm="$default_feature"
libssh="$default_feature"
live_block_migration=${default_feature:-yes}
numa="$default_feature"
replication=${default_feature:-yes}
bochs=${default_feature:-yes}
cloop=${default_feature:-yes}
dmg=${default_feature:-yes}
qcow1=${default_feature:-yes}
vdi=${default_feature:-yes}
vvfat=${default_feature:-yes}
qed=${default_feature:-yes}
parallels=${default_feature:-yes}
debug_mutex="no"
plugins="$default_feature"
rng_none="no"
secret_keyring="$default_feature"
meson=""
meson_args=""
ninja=""
gio="$default_feature"
skip_meson=no
slirp_smbd="$default_feature"
# The following Meson options are handled manually (still they
# are included in the automatically generated help message)
# 1. Track which submodules are needed
capstone="auto"
fdt="auto"
slirp="auto"
# 2. Support --with/--without option
default_devices="true"
# 3. Automatically enable/disable other options
tcg="enabled"
cfi="false"
# 4. Detection partly done in configure
xen=${default_feature:+disabled}
# parse CC options second
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--cross-prefix=*) cross_prefix="$optarg"
cross_compile="yes"
;;
--cc=*) CC="$optarg"
;;
--cxx=*) CXX="$optarg"
;;
--cpu=*) cpu="$optarg"
;;
--extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
QEMU_LDFLAGS="$QEMU_LDFLAGS $optarg"
;;
--extra-cxxflags=*) QEMU_CXXFLAGS="$QEMU_CXXFLAGS $optarg"
;;
--extra-ldflags=*) QEMU_LDFLAGS="$QEMU_LDFLAGS $optarg"
EXTRA_LDFLAGS="$optarg"
;;
--enable-debug-info) debug_info="yes"
;;
--disable-debug-info) debug_info="no"
;;
--cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option"
;;
--cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*}
eval "cross_cc_cflags_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}"
;;
--cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
cc_archs="$cc_archs $cc_arch"
eval "cross_cc_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}"
;;
esac
done
# OS specific
# Using uname is really, really broken. Once we have the right set of checks
# we can eliminate its usage altogether.
# Preferred compiler:
# ${CC} (if set)
# ${cross_prefix}gcc (if cross-prefix specified)
# system compiler
if test -z "${CC}${cross_prefix}"; then
cc="$host_cc"
else
cc="${CC-${cross_prefix}gcc}"
fi
if test -z "${CXX}${cross_prefix}"; then
cxx="c++"
else
cxx="${CXX-${cross_prefix}g++}"
fi
ar="${AR-${cross_prefix}ar}"
as="${AS-${cross_prefix}as}"
ccas="${CCAS-$cc}"
cpp="${CPP-$cc -E}"
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
ranlib="${RANLIB-${cross_prefix}ranlib}"
nm="${NM-${cross_prefix}nm}"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
query_pkg_config() {
"${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
}
pkg_config=query_pkg_config
sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
# default flags for all hosts
# We use -fwrapv to tell the compiler that we require a C dialect where
# left shift of signed integers is well defined and has the expected
# 2s-complement style results. (Both clang and gcc agree that it
# provides these semantics.)
QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv $QEMU_CFLAGS"
QEMU_CFLAGS="-Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
# Flags that are needed during configure but later taken care of by Meson
CONFIGURE_CFLAGS="-std=gnu11 -Wall"
CONFIGURE_LDFLAGS=
check_define() {
cat > $TMPC <<EOF
#if !defined($1)
#error $1 not defined
#endif
int main(void) { return 0; }
EOF
compile_object
}
check_include() {
cat > $TMPC <<EOF
#include <$1>
int main(void) { return 0; }
EOF
compile_object
}
write_c_skeleton() {
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
}
if check_define __linux__ ; then
targetos="Linux"
elif check_define _WIN32 ; then
targetos='MINGW32'
elif check_define __OpenBSD__ ; then
targetos='OpenBSD'
elif check_define __sun__ ; then
targetos='SunOS'
elif check_define __HAIKU__ ; then
targetos='Haiku'
elif check_define __FreeBSD__ ; then
targetos='FreeBSD'
elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then
targetos='GNU/kFreeBSD'
elif check_define __DragonFly__ ; then
targetos='DragonFly'
elif check_define __NetBSD__; then
targetos='NetBSD'
elif check_define __APPLE__; then
targetos='Darwin'
else
# This is a fatal error, but don't report it yet, because we
# might be going to just print the --help text, or it might
# be the result of a missing compiler.
targetos='bogus'
fi
# Some host OSes need non-standard checks for which CPU to use.
# Note that these checks are broken for cross-compilation: if you're
# cross-compiling to one of these OSes then you'll need to specify
# the correct CPU with the --cpu option.
case $targetos in
SunOS)
# $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
cpu="x86_64"
fi
esac
if test ! -z "$cpu" ; then
# command line argument
:
elif check_define __i386__ ; then
cpu="i386"
elif check_define __x86_64__ ; then
if check_define __ILP32__ ; then
cpu="x32"
else
cpu="x86_64"
fi
elif check_define __sparc__ ; then
if check_define __arch64__ ; then
cpu="sparc64"
else
cpu="sparc"
fi
elif check_define _ARCH_PPC ; then
if check_define _ARCH_PPC64 ; then
if check_define _LITTLE_ENDIAN ; then
cpu="ppc64le"
else
cpu="ppc64"
fi
else
cpu="ppc"
fi
elif check_define __mips__ ; then
cpu="mips"
elif check_define __s390__ ; then
if check_define __s390x__ ; then
cpu="s390x"
else
cpu="s390"
fi
elif check_define __riscv ; then
if check_define _LP64 ; then
cpu="riscv64"
else
cpu="riscv32"
fi
elif check_define __arm__ ; then
cpu="arm"
elif check_define __aarch64__ ; then
cpu="aarch64"
else
cpu=$(uname -m)
fi
ARCH=
# Normalise host CPU name and set ARCH.
# Note that this case should only have supported host CPUs, not guests.
case "$cpu" in
ppc|ppc64|s390x|sparc64|x32|riscv32|riscv64)
;;
ppc64le)
ARCH="ppc64"
;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
;;
x86_64|amd64)
cpu="x86_64"
;;
armv*b|armv*l|arm)
cpu="arm"
;;
aarch64)
cpu="aarch64"
;;
mips*)
cpu="mips"
;;
sparc|sun4[cdmuv])
cpu="sparc"
;;
*)
# This will result in either an error or falling back to TCI later
ARCH=unknown
;;
esac
if test -z "$ARCH"; then
ARCH="$cpu"
fi
# OS specific
case $targetos in
MINGW32*)
mingw32="yes"
supported_os="yes"
plugins="no"
pie="no"
;;
GNU/kFreeBSD)
bsd="yes"
;;
FreeBSD)
bsd="yes"
bsd_user="yes"
make="${MAKE-gmake}"
# needed for kinfo_getvmmap(3) in libutil.h
;;
DragonFly)
bsd="yes"
make="${MAKE-gmake}"
;;
NetBSD)
bsd="yes"
make="${MAKE-gmake}"
;;
OpenBSD)
bsd="yes"
make="${MAKE-gmake}"
;;
Darwin)
bsd="yes"
darwin="yes"
# Disable attempts to use ObjectiveC features in os/object.h since they
# won't work when we're compiling with gcc as a C compiler.
QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
;;
SunOS)
solaris="yes"
make="${MAKE-gmake}"
smbd="${SMBD-/usr/sfw/sbin/smbd}"
# needed for CMSG_ macros in sys/socket.h
QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
# needed for TIOCWIN* defines in termios.h
QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
;;
Haiku)
haiku="yes"
pie="no"
QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS -D_BSD_SOURCE -fPIC $QEMU_CFLAGS"
;;
Linux)
linux="yes"
linux_user="yes"
vhost_user=${default_feature:-yes}
;;
esac
: ${make=${MAKE-make}}
# We prefer python 3.x. A bare 'python' is traditionally
# python 2.x, but some distros have it as python 3.x, so
# we check that too
python=
explicit_python=no
for binary in "${PYTHON-python3}" python
do
if has "$binary"
then
python=$(command -v "$binary")
break
fi
done
# Check for ancillary tools used in testing
genisoimage=
for binary in genisoimage mkisofs
do
if has $binary
then
genisoimage=$(command -v "$binary")
break
fi
done
# Default objcc to clang if available, otherwise use CC
if has clang; then
objcc=clang
else
objcc="$cc"
fi
if test "$mingw32" = "yes" ; then
EXESUF=".exe"
# MinGW needs -mthreads for TLS and macro _MT.
CONFIGURE_CFLAGS="-mthreads $CONFIGURE_CFLAGS"
write_c_skeleton;
prefix="/qemu"
qemu_suffix=""
libs_qga="-lws2_32 -lwinmm -lpowrprof -lwtsapi32 -lwininet -liphlpapi -lnetapi32 $libs_qga"
fi
werror=""
. $source_path/scripts/meson-buildoptions.sh
meson_options=
meson_option_parse() {
meson_options="$meson_options $(_meson_option_parse "$@")"
if test $? -eq 1; then
echo "ERROR: unknown option $1"
echo "Try '$0 --help' for more information"
exit 1
fi
}
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--help|-h) show_help=yes
;;
--version|-V) exec cat $source_path/VERSION
;;
--prefix=*) prefix="$optarg"
;;
--interp-prefix=*) interp_prefix="$optarg"
;;
--cross-prefix=*)
;;
--cc=*)
;;
--host-cc=*) host_cc="$optarg"
;;
--cxx=*)
;;
--iasl=*) iasl="$optarg"
;;
--objcc=*) objcc="$optarg"
;;
--make=*) make="$optarg"
;;
--install=*)
;;
--python=*) python="$optarg" ; explicit_python=yes
;;
--sphinx-build=*) sphinx_build="$optarg"
;;
--skip-meson) skip_meson=yes
;;
--meson=*) meson="$optarg"
;;
--ninja=*) ninja="$optarg"
;;
--smbd=*) smbd="$optarg"
;;
--extra-cflags=*)
;;
--extra-cxxflags=*)
;;
--extra-ldflags=*)
;;
--enable-debug-info)
;;
--disable-debug-info)
;;
--cross-cc-*)
;;
--enable-modules)
modules="yes"
;;
--disable-modules)
modules="no"
;;
--disable-module-upgrades) module_upgrades="no"
;;
--enable-module-upgrades) module_upgrades="yes"
;;
--cpu=*)
;;
--target-list=*) target_list="$optarg"
if test "$target_list_exclude"; then
error_exit "Can't mix --target-list with --target-list-exclude"
fi
;;
--target-list-exclude=*) target_list_exclude="$optarg"
if test "$target_list"; then
error_exit "Can't mix --target-list-exclude with --target-list"
fi
;;
--with-trace-file=*) trace_file="$optarg"
;;
--with-default-devices) default_devices="true"
;;
--without-default-devices) default_devices="false"
;;
--with-devices-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --with-devices-FOO option"
;;
--with-devices-*) device_arch=${opt#--with-devices-};
device_arch=${device_arch%%=*}
cf=$source_path/configs/devices/$device_arch-softmmu/$optarg.mak
if test -f "$cf"; then
device_archs="$device_archs $device_arch"
eval "devices_${device_arch}=\$optarg"
else
error_exit "File $cf does not exist"
fi
;;
--without-default-features) # processed above
;;
--enable-gprof) gprof="yes"
;;
--enable-gcov) gcov="yes"
;;
--static)
static="yes"
QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
;;
--mandir=*) mandir="$optarg"
;;
--bindir=*) bindir="$optarg"
;;
2011-05-15 11:08:59 +02:00
--libdir=*) libdir="$optarg"
;;
--libexecdir=*) libexecdir="$optarg"
;;
--includedir=*) includedir="$optarg"
;;
--datadir=*) datadir="$optarg"
;;
--with-suffix=*) qemu_suffix="$optarg"
;;
--docdir=*) docdir="$optarg"
;;
--localedir=*) localedir="$optarg"
;;
--sysconfdir=*) sysconfdir="$optarg"
;;
--localstatedir=*) local_statedir="$optarg"
;;
--firmwarepath=*) firmwarepath="$optarg"
;;
--host=*|--build=*|\
--disable-dependency-tracking|\
--sbindir=*|--sharedstatedir=*|\
--oldincludedir=*|--datarootdir=*|--infodir=*|\
--htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
# These switches are silently ignored, for compatibility with
# autoconf-generated configure scripts. This allows QEMU's
# configure to be used by RPM and similar macros that set
# lots of directory switches by default.
;;
--disable-qom-cast-debug) qom_cast_debug="no"
;;
--enable-qom-cast-debug) qom_cast_debug="yes"
;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
--block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--enable-block-drv-whitelist-in-tools) block_drv_whitelist_tools="yes"
;;
--disable-block-drv-whitelist-in-tools) block_drv_whitelist_tools="no"
;;
--enable-debug-tcg) debug_tcg="yes"
;;
--disable-debug-tcg) debug_tcg="no"
;;
--enable-debug)
# Enable debugging options that aren't excessively noisy
debug_tcg="yes"
debug_mutex="yes"
debug="yes"
strip_opt="no"
fortify_source="no"
;;
--enable-sanitizers) sanitizers="yes"
;;
--disable-sanitizers) sanitizers="no"
;;
--enable-tsan) tsan="yes"
;;
--disable-tsan) tsan="no"
;;
--disable-strip) strip_opt="no"
;;
--disable-slirp) slirp="disabled"
;;
--enable-slirp) slirp="enabled"
;;
--enable-slirp=git) slirp="internal"
;;
--enable-slirp=*) slirp="$optarg"
;;
--disable-xen) xen="disabled"
;;
--enable-xen) xen="enabled"
;;
--disable-tcg) tcg="disabled"
plugins="no"
;;
--enable-tcg) tcg="enabled"
;;
--enable-profiler) profiler="yes"
;;
--disable-system) softmmu="no"
;;
--enable-system) softmmu="yes"
;;
--disable-user)
linux_user="no" ;
bsd_user="no" ;
;;
--enable-user) ;;
--disable-linux-user) linux_user="no"
;;
--enable-linux-user) linux_user="yes"
;;
--disable-bsd-user) bsd_user="no"
;;
--enable-bsd-user) bsd_user="yes"
;;
--enable-pie) pie="yes"
;;
--disable-pie) pie="no"
;;
--enable-werror) werror="yes"
;;
--disable-werror) werror="no"
;;
--enable-lto) lto="true"
;;
--disable-lto) lto="false"
;;
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
--enable-stack-protector) stack_protector="yes"
;;
--disable-stack-protector) stack_protector="no"
;;
--enable-safe-stack) safe_stack="yes"
;;
--disable-safe-stack) safe_stack="no"
;;
--enable-cfi)
cfi="true";
lto="true";
;;
--disable-cfi) cfi="false"
;;
--disable-fdt) fdt="disabled"
;;
--enable-fdt) fdt="enabled"
;;
--enable-fdt=git) fdt="internal"
;;
--enable-fdt=*) fdt="$optarg"
;;
--disable-membarrier) membarrier="no"
;;
--enable-membarrier) membarrier="yes"
;;
--with-pkgversion=*) pkgversion="$optarg"
;;
--with-coroutine=*) coroutine="$optarg"
;;
--disable-coroutine-pool) coroutine_pool="no"
;;
--enable-coroutine-pool) coroutine_pool="yes"
;;
--enable-debug-stack-usage) debug_stack_usage="yes"
;;
--enable-crypto-afalg) crypto_afalg="yes"
;;
--disable-crypto-afalg) crypto_afalg="no"
;;
--disable-vhost-net) vhost_net="no"
;;
--enable-vhost-net) vhost_net="yes"
;;
--disable-vhost-crypto) vhost_crypto="no"
;;
--enable-vhost-crypto) vhost_crypto="yes"
;;
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
--disable-vhost-scsi) vhost_scsi="no"
;;
--enable-vhost-scsi) vhost_scsi="yes"
;;
--disable-vhost-vsock) vhost_vsock="no"
;;
--enable-vhost-vsock) vhost_vsock="yes"
;;
--disable-vhost-user-fs) vhost_user_fs="no"
;;
--enable-vhost-user-fs) vhost_user_fs="yes"
;;
--disable-opengl) opengl="no"
;;
--enable-opengl) opengl="yes"
;;
--disable-xfsctl) xfs="no"
;;
--enable-xfsctl) xfs="yes"
;;
--disable-zlib-test)
;;
--enable-guest-agent) guest_agent="yes"
;;
--disable-guest-agent) guest_agent="no"
;;
--with-vss-sdk) vss_win32_sdk=""
;;
--with-vss-sdk=*) vss_win32_sdk="$optarg"
;;
--without-vss-sdk) vss_win32_sdk="no"
;;
--with-win-sdk) win_sdk=""
;;
--with-win-sdk=*) win_sdk="$optarg"
;;
--without-win-sdk) win_sdk="no"
;;
--enable-tools) want_tools="yes"
;;
--disable-tools) want_tools="no"
;;
--disable-avx2) avx2_opt="no"
;;
--enable-avx2) avx2_opt="yes"
;;
--disable-avx512f) avx512f_opt="no"
;;
--enable-avx512f) avx512f_opt="yes"
;;
--disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
;;
--enable-vhdx|--disable-vhdx)
echo "$0: $opt is obsolete, VHDX driver is always built" >&2
;;
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
--tls-priority=*) tls_priority="$optarg"
;;
--enable-rdma) rdma="yes"
;;
--disable-rdma) rdma="no"
;;
--enable-pvrdma) pvrdma="yes"
;;
--disable-pvrdma) pvrdma="no"
;;
--disable-tpm) tpm="no"
;;
--enable-tpm) tpm="yes"
;;
--disable-libssh) libssh="no"
;;
--enable-libssh) libssh="yes"
;;
--disable-live-block-migration) live_block_migration="no"
;;
--enable-live-block-migration) live_block_migration="yes"
;;
--disable-numa) numa="no"
;;
--enable-numa) numa="yes"
;;
--disable-replication) replication="no"
;;
--enable-replication) replication="yes"
;;
--disable-bochs) bochs="no"
;;
--enable-bochs) bochs="yes"
;;
--disable-cloop) cloop="no"
;;
--enable-cloop) cloop="yes"
;;
--disable-dmg) dmg="no"
;;
--enable-dmg) dmg="yes"
;;
--disable-qcow1) qcow1="no"
;;
--enable-qcow1) qcow1="yes"
;;
--disable-vdi) vdi="no"
;;
--enable-vdi) vdi="yes"
;;
--disable-vvfat) vvfat="no"
;;
--enable-vvfat) vvfat="yes"
;;
--disable-qed) qed="no"
;;
--enable-qed) qed="yes"
;;
--disable-parallels) parallels="no"
;;
--enable-parallels) parallels="yes"
;;
--disable-vhost-user) vhost_user="no"
;;
--enable-vhost-user) vhost_user="yes"
;;
--disable-vhost-vdpa) vhost_vdpa="no"
;;
--enable-vhost-vdpa) vhost_vdpa="yes"
;;
--disable-vhost-kernel) vhost_kernel="no"
;;
--enable-vhost-kernel) vhost_kernel="yes"
;;
--disable-capstone) capstone="disabled"
;;
--enable-capstone) capstone="enabled"
;;
--enable-capstone=git) capstone="internal"
;;
--enable-capstone=*) capstone="$optarg"
;;
--with-git=*) git="$optarg"
;;
--with-git-submodules=*)
git_submodules_action="$optarg"
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
;;
--enable-debug-mutex) debug_mutex=yes
;;
--disable-debug-mutex) debug_mutex=no
;;
--enable-plugins) if test "$mingw32" = "yes"; then
error_exit "TCG plugins not currently supported on Windows platforms"
else
plugins="yes"
fi
;;
--disable-plugins) plugins="no"
;;
--enable-containers) use_containers="yes"
;;
--disable-containers) use_containers="no"
;;
--gdb=*) gdb_bin="$optarg"
;;
--enable-rng-none) rng_none=yes
;;
--disable-rng-none) rng_none=no
;;
--enable-keyring) secret_keyring="yes"
;;
--disable-keyring) secret_keyring="no"
;;
--enable-gio) gio=yes
;;
--disable-gio) gio=no
;;
--enable-slirp-smbd) slirp_smbd=yes
;;
--disable-slirp-smbd) slirp_smbd=no
;;
# backwards compatibility options
--enable-trace-backend=*) meson_option_parse "--enable-trace-backends=$optarg" "$optarg"
;;
--disable-blobs) meson_option_parse --disable-install-blobs ""
;;
--enable-tcmalloc) meson_option_parse --enable-malloc=tcmalloc tcmalloc
;;
--enable-jemalloc) meson_option_parse --enable-malloc=jemalloc jemalloc
;;
# everything else has the same name in configure and meson
--enable-* | --disable-*) meson_option_parse "$opt" "$optarg"
;;
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
exit 1
;;
esac
done
# test for any invalid configuration combinations
if test "$plugins" = "yes" -a "$tcg" = "disabled"; then
error_exit "Can't enable plugins on non-TCG builds"
fi
case $git_submodules_action in
update|validate)
if test ! -e "$source_path/.git"; then
echo "ERROR: cannot $git_submodules_action git submodules without .git"
exit 1
fi
;;
ignore)
if ! test -f "$source_path/ui/keycodemapdb/README"
then
echo
echo "ERROR: missing GIT submodules"
echo
if test -e "$source_path/.git"; then
echo "--with-git-submodules=ignore specified but submodules were not"
echo "checked out. Please initialize and update submodules."
else
echo "This is not a GIT checkout but module content appears to"
echo "be missing. Do not use 'git archive' or GitHub download links"
echo "to acquire QEMU source archives. Non-GIT builds are only"
echo "supported with source archives linked from:"
echo
echo " https://www.qemu.org/download/#source"
echo
echo "Developers working with GIT can use scripts/archive-source.sh"
echo "if they need to create valid source archives."
fi
echo
exit 1
fi
;;
*)
echo "ERROR: invalid --with-git-submodules= value '$git_submodules_action'"
exit 1
;;
esac
libdir="${libdir:-$prefix/lib}"
libexecdir="${libexecdir:-$prefix/libexec}"
includedir="${includedir:-$prefix/include}"
if test "$mingw32" = "yes" ; then
bindir="${bindir:-$prefix}"
else
bindir="${bindir:-$prefix/bin}"
fi
mandir="${mandir:-$prefix/share/man}"
datadir="${datadir:-$prefix/share}"
docdir="${docdir:-$prefix/share/doc}"
sysconfdir="${sysconfdir:-$prefix/etc}"
local_statedir="${local_statedir:-$prefix/var}"
firmwarepath="${firmwarepath:-$datadir/qemu-firmware}"
localedir="${localedir:-$datadir/locale}"
case "$cpu" in
ppc)
CPU_CFLAGS="-m32"
QEMU_LDFLAGS="-m32 $QEMU_LDFLAGS"
;;
ppc64)
CPU_CFLAGS="-m64"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
sparc)
CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
QEMU_LDFLAGS="-m32 -mv8plus $QEMU_LDFLAGS"
;;
sparc64)
CPU_CFLAGS="-m64 -mcpu=ultrasparc"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
s390)
CPU_CFLAGS="-m31"
QEMU_LDFLAGS="-m31 $QEMU_LDFLAGS"
;;
s390x)
CPU_CFLAGS="-m64"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
i386)
CPU_CFLAGS="-m32"
QEMU_LDFLAGS="-m32 $QEMU_LDFLAGS"
;;
x86_64)
# ??? Only extremely old AMD cpus do not have cmpxchg16b.
# If we truly care, we should simply detect this case at
# runtime and generate the fallback to serial emulation.
CPU_CFLAGS="-m64 -mcx16"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
x32)
CPU_CFLAGS="-mx32"
QEMU_LDFLAGS="-mx32 $QEMU_LDFLAGS"
;;
# No special flags required for other host CPUs
esac
if eval test -z "\${cross_cc_$cpu}"; then
eval "cross_cc_${cpu}=\$cc"
cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
fi
# For user-mode emulation the host arch has to be one we explicitly
# support, even if we're using TCI.
if [ "$ARCH" = "unknown" ]; then
bsd_user="no"
linux_user="no"
fi
default_target_list=""
deprecated_targets_list=ppc64abi32-linux-user
deprecated_features=""
mak_wilds=""
if [ "$softmmu" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-softmmu.mak"
fi
if [ "$linux_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-linux-user.mak"
fi
if [ "$bsd_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/configs/targets/*-bsd-user.mak"
fi
# If the user doesn't explicitly specify a deprecated target we will
# skip it.
if test -z "$target_list"; then
if test -z "$target_list_exclude"; then
target_list_exclude="$deprecated_targets_list"
else
target_list_exclude="$target_list_exclude,$deprecated_targets_list"
fi
fi
for config in $mak_wilds; do
target="$(basename "$config" .mak)"
if echo "$target_list_exclude" | grep -vq "$target"; then
default_target_list="${default_target_list} $target"
fi
done
if test x"$show_help" = x"yes" ; then
cat << EOF
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Standard options:
--help print this message
--prefix=PREFIX install in PREFIX [$prefix]
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [$interp_prefix]
--target-list=LIST set target list (default: build all non-deprecated)
$(echo Available targets: $default_target_list | \
fold -s -w 53 | sed -e 's/^/ /')
$(echo Deprecated targets: $deprecated_targets_list | \
fold -s -w 53 | sed -e 's/^/ /')
--target-list-exclude=LIST exclude a set of targets from the default target-list
Advanced options (experts only):
--cross-prefix=PREFIX use PREFIX for compile tools, PREFIX can be blank [$cross_prefix]
--cc=CC use C compiler CC [$cc]
--iasl=IASL use ACPI compiler IASL [$iasl]
--host-cc=CC use C compiler CC [$host_cc] for code run at
build time
--cxx=CXX use C++ compiler CXX [$cxx]
--objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
--extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
--extra-cxxflags=CXXFLAGS append extra C++ compiler flags QEMU_CXXFLAGS
--extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
--cross-cc-ARCH=CC use compiler when building ARCH guest test cases
--cross-cc-flags-ARCH= use compiler flags when building ARCH guest tests
--make=MAKE use specified make [$make]
--python=PYTHON use specified python [$python]
--sphinx-build=SPHINX use specified sphinx-build [$sphinx_build]
--meson=MESON use specified meson [$meson]
--ninja=NINJA use specified ninja [$ninja]
--smbd=SMBD use specified smbd [$smbd]
--with-git=GIT use specified git [$git]
--with-git-submodules=update update git submodules (default if .git dir exists)
--with-git-submodules=validate fail if git submodules are not up to date
--with-git-submodules=ignore do not update or check git submodules (default if no .git dir)
--static enable static build [$static]
--mandir=PATH install man pages in PATH
--datadir=PATH install firmware in PATH/$qemu_suffix
--localedir=PATH install translation in PATH/$qemu_suffix
--docdir=PATH install documentation in PATH/$qemu_suffix
--bindir=PATH install binaries in PATH
--libdir=PATH install libraries in PATH
--libexecdir=PATH install helper binaries in PATH
--sysconfdir=PATH install config in PATH/$qemu_suffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--firmwarepath=PATH search PATH for firmware files
--efi-aarch64=PATH PATH of efi file to use for aarch64 VMs.
--with-suffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir/docdir [$qemu_suffix]
--with-pkgversion=VERS use specified string as sub-version of the package
--without-default-features default all --enable-* options to "disabled"
--without-default-devices do not include any device that is not needed to
start the emulator (only use if you are including
desired devices in configs/devices/)
--with-devices-ARCH=NAME override default configs/devices
--enable-debug enable common debug build options
--enable-sanitizers enable default sanitizers
--enable-tsan enable thread sanitizer
--disable-strip disable stripping binaries
--disable-werror disable compilation abort on warning
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
--disable-stack-protector disable compiler-provided stack protection
--audio-drv-list=LIST set audio drivers list
--block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
--block-drv-rw-whitelist=L
set block driver read-write whitelist
(by default affects only QEMU, not tools like qemu-img)
--block-drv-ro-whitelist=L
set block driver read-only whitelist
(by default affects only QEMU, not tools like qemu-img)
--enable-block-drv-whitelist-in-tools
use block whitelist also in tools instead of only QEMU
--with-trace-file=NAME Full PATH,NAME of file to store traces
Default:trace-<pid>
--cpu=CPU Build for host CPU [$cpu]
--with-coroutine=BACKEND coroutine backend. Supported options:
ucontext, sigaltstack, windows
--enable-gcov enable test coverage analysis with gcov
--with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
--with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
--tls-priority default TLS protocol/cipher priority string
--enable-gprof QEMU profiling with gprof
--enable-profiler profiler support
--enable-debug-stack-usage
track the maximum stack usage of stacks created by qemu_alloc_stack
--enable-plugins
enable plugins via shared library loading
--disable-containers don't use containers for cross-building
--gdb=GDB-path gdb to use for gdbstub tests [$gdb_bin]
EOF
meson_options_help
cat << EOF
system all system emulation targets
user supported user emulation targets
linux-user all linux usermode emulation targets
bsd-user all BSD usermode emulation targets
guest-agent build the QEMU Guest Agent
pie Position Independent Executables
modules modules support (non-Windows)
module-upgrades try to load modules from alternate paths for upgrades
debug-tcg TCG debugging (default is disabled)
debug-info debugging information
lto Enable Link-Time Optimization.
safe-stack SafeStack Stack Smash Protection. Depends on
clang/llvm >= 3.7 and requires coroutine backend ucontext.
membarrier membarrier system call (for Linux 4.14+ or Windows)
rdma Enable RDMA-based migration
pvrdma Enable PVRDMA support
vhost-net vhost-net kernel acceleration support
vhost-vsock virtio sockets device support
vhost-scsi vhost-scsi kernel target support
vhost-crypto vhost-user-crypto backend support
vhost-kernel vhost kernel backend support
vhost-user vhost-user backend support
vhost-vdpa vhost-vdpa kernel backend support
live-block-migration Block migration in the main migration stream
coroutine-pool coroutine freelist (better performance)
tpm TPM support
libssh ssh block device support
numa libnuma support
avx2 AVX2 optimization support
avx512f AVX512F optimization support
replication replication support
opengl opengl support
xfsctl xfsctl support
qom-cast-debug cast debugging support
tools build qemu-io, qemu-nbd and qemu-img tools
bochs bochs image format support
cloop cloop image format support
dmg dmg image format support
qcow1 qcow v1 image format support
vdi vdi image format support
vvfat vvfat image format support
qed qed image format support
parallels parallels image format support
crypto-afalg Linux AF_ALG crypto backend driver
debug-mutex mutex debugging support
rng-none dummy RNG, avoid using /dev/(u)random and getrandom()
gio libgio support
slirp-smbd use smbd (at path --smbd=*) in slirp networking
NOTE: The object files are built at the place where configure is launched
EOF
exit 0
fi
# Remove old dependency files to make sure that they get properly regenerated
rm -f */config-devices.mak.d
if test -z "$python"
then
error_exit "Python not found. Use --python=/path/to/python"
fi
if ! has "$make"
then
error_exit "GNU make ($make) not found"
fi
# Note that if the Python conditional here evaluates True we will exit
# with status 1 which is a shell 'false' value.
if ! $python -c 'import sys; sys.exit(sys.version_info < (3,6))'; then
error_exit "Cannot use '$python', Python >= 3.6 is required." \
"Use --python=/path/to/python to specify a supported Python."
fi
# Preserve python version since some functionality is dependent on it
python_version=$($python -c 'import sys; print("%d.%d.%d" % (sys.version_info[0], sys.version_info[1], sys.version_info[2]))' 2>/dev/null)
# Suppress writing compiled files
python="$python -B"
if test -z "$meson"; then
if test "$explicit_python" = no && has meson && version_ge "$(meson --version)" 0.59.2; then
meson=meson
elif test $git_submodules_action != 'ignore' ; then
meson=git
elif test -e "${source_path}/meson/meson.py" ; then
meson=internal
else
if test "$explicit_python" = yes; then
error_exit "--python requires using QEMU's embedded Meson distribution, but it was not found."
else
error_exit "Meson not found. Use --meson=/path/to/meson"
fi
fi
else
# Meson uses its own Python interpreter to invoke other Python scripts,
# but the user wants to use the one they specified with --python.
#
# We do not want to override the distro Python interpreter (and sometimes
# cannot: for example in Homebrew /usr/bin/meson is a bash script), so
# just require --meson=git|internal together with --python.
if test "$explicit_python" = yes; then
case "$meson" in
git | internal) ;;
*) error_exit "--python requires using QEMU's embedded Meson distribution." ;;
esac
fi
fi
if test "$meson" = git; then
git_submodules="${git_submodules} meson"
fi
case "$meson" in
git | internal)
meson="$python ${source_path}/meson/meson.py"
;;
*) meson=$(command -v "$meson") ;;
esac
# Probe for ninja
if test -z "$ninja"; then
for c in ninja ninja-build samu; do
if has $c; then
ninja=$(command -v "$c")
break
fi
done
if test -z "$ninja"; then
error_exit "Cannot find Ninja"
fi
fi
# Check that the C compiler works. Doing this here before testing
# the host CPU ensures that we had a valid CC to autodetect the
# $cpu var (and we should bail right here if that's not the case).
# It also allows the help message to be printed without a CC.
write_c_skeleton;
if compile_object ; then
: C compiler works ok
else
error_exit "\"$cc\" either does not exist or does not work"
fi
if ! compile_prog ; then
error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
fi
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
# Consult white-list to determine whether to enable werror
# by default. Only enable by default for git builds
if test -z "$werror" ; then
if test "$git_submodules_action" != "ignore" && \
{ test "$linux" = "yes" || test "$mingw32" = "yes"; }; then
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
werror="yes"
else
werror="no"
fi
fi
if test "$targetos" = "bogus"; then
# Now that we know that we're not printing the help and that
# the compiler works (so the results of the check_defines we used
# to identify the OS are reliable), if we didn't recognize the
# host OS we should stop now.
error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')"
fi
# Check whether the compiler matches our minimum requirements:
cat > $TMPC << EOF
#if defined(__clang_major__) && defined(__clang_minor__)
# ifdef __apple_build_version__
# if __clang_major__ < 10 || (__clang_major__ == 10 && __clang_minor__ < 0)
# error You need at least XCode Clang v10.0 to compile QEMU
# endif
# else
# if __clang_major__ < 6 || (__clang_major__ == 6 && __clang_minor__ < 0)
# error You need at least Clang v6.0 to compile QEMU
# endif
# endif
#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
# if __GNUC__ < 7 || (__GNUC__ == 7 && __GNUC_MINOR__ < 4)
# error You need at least GCC v7.4.0 to compile QEMU
# endif
#else
# error You either need GCC or Clang to compiler QEMU
#endif
int main (void) { return 0; }
EOF
if ! compile_prog "" "" ; then
error_exit "You need at least GCC v7.4 or Clang v6.0 (or XCode Clang v10.0)"
fi
# Accumulate -Wfoo and -Wno-bar separately.
# We will list all of the enable flags first, and the disable flags second.
# Note that we do not add -Werror, because that would enable it for all
# configure tests. If a configure test failed due to -Werror this would
# just silently disable some features, so it's too error prone.
warn_flags=
add_to warn_flags -Wold-style-declaration
add_to warn_flags -Wold-style-definition
add_to warn_flags -Wtype-limits
add_to warn_flags -Wformat-security
add_to warn_flags -Wformat-y2k
add_to warn_flags -Winit-self
add_to warn_flags -Wignored-qualifiers
add_to warn_flags -Wempty-body
add_to warn_flags -Wnested-externs
add_to warn_flags -Wendif-labels
add_to warn_flags -Wexpansion-to-defined
add_to warn_flags -Wimplicit-fallthrough=2
nowarn_flags=
add_to nowarn_flags -Wno-initializer-overrides
add_to nowarn_flags -Wno-missing-include-dirs
add_to nowarn_flags -Wno-shift-negative-value
add_to nowarn_flags -Wno-string-plus-int
add_to nowarn_flags -Wno-typedef-redefinition
add_to nowarn_flags -Wno-tautological-type-limit-compare
add_to nowarn_flags -Wno-psabi
gcc_flags="$warn_flags $nowarn_flags"
cc_has_warning_flag() {
write_c_skeleton;
# Use the positive sense of the flag when testing for -Wno-wombat
# support (gcc will happily accept the -Wno- form of unknown
# warning options).
optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
compile_prog "-Werror $optflag" ""
}
for flag in $gcc_flags; do
if cc_has_warning_flag $flag ; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
fi
done
if test "$stack_protector" != "no"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
char arr[64], *p = arr, *c = argv[0];
while (*c) {
*p++ = *c++;
}
return 0;
}
EOF
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
if compile_object "-Werror $flag" &&
compile_prog "-Werror $flag" ""; then
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
sp_on=1
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
break
fi
done
if test "$stack_protector" = yes; then
if test $sp_on = 0; then
error_exit "Stack protector not supported"
fi
fi
fi
# Disable -Wmissing-braces on older compilers that warn even for
# the "universal" C zero initializer {0}.
cat > $TMPC << EOF
struct {
int a[2];
} x = {0};
EOF
if compile_object "-Werror" "" ; then
:
else
QEMU_CFLAGS="$QEMU_CFLAGS -Wno-missing-braces"
fi
# Our module code doesn't support Windows
if test "$modules" = "yes" && test "$mingw32" = "yes" ; then
error_exit "Modules are not available for Windows"
fi
# module_upgrades is only reasonable if modules are enabled
if test "$modules" = "no" && test "$module_upgrades" = "yes" ; then
error_exit "Can't enable module-upgrades as Modules are not enabled"
fi
# Static linking is not possible with plugins, modules or PIE
if test "$static" = "yes" ; then
if test "$modules" = "yes" ; then
error_exit "static and modules are mutually incompatible"
fi
if test "$plugins" = "yes"; then
error_exit "static and plugins are mutually incompatible"
else
plugins="no"
fi
fi
# Unconditional check for compiler __thread support
cat > $TMPC << EOF
static __thread int tls_var;
int main(void) { return tls_var; }
EOF
if ! compile_prog "-Werror" "" ; then
error_exit "Your compiler does not support the __thread specifier for " \
"Thread-Local Storage (TLS). Please upgrade to a version that does."
fi
cat > $TMPC << EOF
#ifdef __linux__
# define THREAD __thread
#else
# define THREAD
#endif
static THREAD int tls_var;
int main(void) { return tls_var; }
EOF
# Check we support --no-pie first; we will need this for building ROMs.
if compile_prog "-Werror -fno-pie" "-no-pie"; then
CFLAGS_NOPIE="-fno-pie"
fi
if test "$static" = "yes"; then
if test "$pie" != "no" && compile_prog "-Werror -fPIE -DPIE" "-static-pie"; then
CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
QEMU_LDFLAGS="-static-pie $QEMU_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "-static-pie not available due to missing toolchain support"
else
QEMU_LDFLAGS="-static $QEMU_LDFLAGS"
pie="no"
fi
elif test "$pie" = "no"; then
CONFIGURE_CFLAGS="$CFLAGS_NOPIE $CONFIGURE_CFLAGS"
elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then
CONFIGURE_CFLAGS="-fPIE -DPIE $CONFIGURE_CFLAGS"
CONFIGURE_LDFLAGS="-pie $CONFIGURE_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "PIE not available due to missing toolchain support"
else
echo "Disabling PIE due to missing toolchain support"
pie="no"
fi
# Detect support for PT_GNU_RELRO + DT_BIND_NOW.
# The combination is known as "full relro", because .got.plt is read-only too.
if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
QEMU_LDFLAGS="-Wl,-z,relro -Wl,-z,now $QEMU_LDFLAGS"
fi
##########################################
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
# specification is necessary
if test "$cpu" = "i386"; then
cat > $TMPC << EOF
static int sfaa(int *ptr)
{
return __sync_fetch_and_and(ptr, 0);
}
int main(void)
{
int val = 42;
val = __sync_val_compare_and_swap(&val, 0, 1);
sfaa(&val);
return val;
}
EOF
if ! compile_prog "" "" ; then
QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
fi
fi
if test "$tcg" = "enabled"; then
git_submodules="$git_submodules tests/fp/berkeley-testfloat-3"
git_submodules="$git_submodules tests/fp/berkeley-softfloat-3"
fi
if test -z "${target_list+xxx}" ; then
default_targets=yes
for target in $default_target_list; do
target_list="$target_list $target"
done
target_list="${target_list# }"
else
default_targets=no
target_list=$(echo "$target_list" | sed -e 's/,/ /g')
for target in $target_list; do
# Check that we recognised the target name; this allows a more
# friendly error message than if we let it fall through.
case " $default_target_list " in
*" $target "*)
;;
*)
error_exit "Unknown target name '$target'"
;;
esac
done
fi
for target in $target_list; do
# if a deprecated target is enabled we note it here
if echo "$deprecated_targets_list" | grep -q "$target"; then
add_to deprecated_features $target
fi
done
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
;;
*) softmmu=no
;;
esac
feature_not_found() {
feature=$1
remedy=$2
error_exit "User requested feature $feature" \
"configure was not able to find it." \
"$remedy"
}
# ---
# big/little endian test
cat > $TMPC << EOF
#include <stdio.h>
short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
int main(int argc, char *argv[])
{
return printf("%s %s\n", (char *)big_endian, (char *)little_endian);
}
EOF
if compile_prog ; then
if strings -a $TMPE | grep -q BiGeNdIaN ; then
bigendian="yes"
elif strings -a $TMPE | grep -q LiTtLeEnDiAn ; then
bigendian="no"
else
echo big/little test failed
exit 1
fi
else
echo big/little test failed
exit 1
fi
##########################################
# system tools
if test -z "$want_tools"; then
if test "$softmmu" = "no"; then
want_tools=no
else
want_tools=yes
fi
fi
##########################################
# L2TPV3 probe
cat > $TMPC <<EOF
#include <sys/socket.h>
#include <linux/ip.h>
int main(void) { return sizeof(struct mmsghdr); }
EOF
if compile_prog "" "" ; then
l2tpv3=yes
else
l2tpv3=no
fi
#########################################
# vhost interdependencies and host support
# vhost backends
if test "$vhost_user" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-user is only available on Linux"
fi
test "$vhost_vdpa" = "" && vhost_vdpa=$linux
if test "$vhost_vdpa" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-vdpa is only available on Linux"
fi
test "$vhost_kernel" = "" && vhost_kernel=$linux
if test "$vhost_kernel" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-kernel is only available on Linux"
fi
# vhost-kernel devices
test "$vhost_scsi" = "" && vhost_scsi=$vhost_kernel
if test "$vhost_scsi" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-scsi requires --enable-vhost-kernel"
fi
test "$vhost_vsock" = "" && vhost_vsock=$vhost_kernel
if test "$vhost_vsock" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-vsock requires --enable-vhost-kernel"
fi
# vhost-user backends
test "$vhost_net_user" = "" && vhost_net_user=$vhost_user
if test "$vhost_net_user" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-net-user requires --enable-vhost-user"
fi
test "$vhost_crypto" = "" && vhost_crypto=$vhost_user
if test "$vhost_crypto" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-crypto requires --enable-vhost-user"
fi
test "$vhost_user_fs" = "" && vhost_user_fs=$vhost_user
if test "$vhost_user_fs" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-user-fs requires --enable-vhost-user"
fi
#vhost-vdpa backends
test "$vhost_net_vdpa" = "" && vhost_net_vdpa=$vhost_vdpa
if test "$vhost_net_vdpa" = "yes" && test "$vhost_vdpa" = "no"; then
error_exit "--enable-vhost-net-vdpa requires --enable-vhost-vdpa"
fi
# OR the vhost-kernel, vhost-vdpa and vhost-user values for simplicity
if test "$vhost_net" = ""; then
test "$vhost_net_user" = "yes" && vhost_net=yes
test "$vhost_net_vdpa" = "yes" && vhost_net=yes
test "$vhost_kernel" = "yes" && vhost_net=yes
fi
##########################################
# pkg-config probe
if ! has "$pkg_config_exe"; then
error_exit "pkg-config binary '$pkg_config_exe' not found"
fi
##########################################
# NPTL probe
if test "$linux_user" = "yes"; then
cat > $TMPC <<EOF
#include <sched.h>
#include <linux/futex.h>
int main(void) {
#if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
#error bork
#endif
return 0;
}
EOF
if ! compile_object ; then
feature_not_found "nptl" "Install glibc and linux kernel headers."
fi
fi
##########################################
# xen probe
if test "$xen" != "disabled" ; then
# Check whether Xen library path is specified via --extra-ldflags to avoid
# overriding this setting with pkg-config output. If not, try pkg-config
# to obtain all needed flags.
if ! echo $EXTRA_LDFLAGS | grep tools/libxc > /dev/null && \
$pkg_config --exists xencontrol ; then
xen_ctrl_version="$(printf '%d%02d%02d' \
$($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
xen=enabled
xen_pc="xencontrol xenstore xenforeignmemory xengnttab"
xen_pc="$xen_pc xenevtchn xendevicemodel"
if $pkg_config --exists xentoolcore; then
xen_pc="$xen_pc xentoolcore"
fi
xen_cflags="$($pkg_config --cflags $xen_pc)"
xen_libs="$($pkg_config --libs $xen_pc)"
else
xen_libs="-lxenstore -lxenctrl"
xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
# First we test whether Xen headers and libraries are available.
# If no, we are done and there is no Xen support.
# If yes, more tests are run to detect the Xen version.
# Xen (any)
cat > $TMPC <<EOF
#include <xenctrl.h>
int main(void) {
return 0;
}
EOF
if ! compile_prog "" "$xen_libs" ; then
# Xen not found
if test "$xen" = "enabled" ; then
feature_not_found "xen" "Install xen devel"
fi
xen=disabled
# Xen unstable
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
#include <xenforeignmemory.h>
int main(void) {
xendevicemodel_handle *xd;
xenforeignmemory_handle *xfmem;
xd = xendevicemodel_open(0, 0);
xendevicemodel_pin_memory_cacheattr(xd, 0, 0, 0, 0);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map_resource(xfmem, 0, 0, 0, 0, 0, NULL, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41100
xen=enabled
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenforeignmemory.h>
#include <xentoolcore.h>
int main(void) {
xenforeignmemory_handle *xfmem;
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map2(xfmem, 0, 0, 0, 0, 0, 0, 0);
xentoolcore_restrict_all(0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41000
xen=enabled
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
int main(void) {
xendevicemodel_handle *xd;
xd = xendevicemodel_open(0, 0);
xendevicemodel_close(xd);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs"
xen_ctrl_version=40900
xen=enabled
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*
* Also, check if xengnttab_grant_copy_segment_t is defined and
* grant copy operation is implemented.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xengnttab_grant_copy_segment_t* seg = NULL;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_grant_copy(xg, 0, seg);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40800
xen=enabled
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_map_grant_ref(xg, 0, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40701
xen=enabled
# Xen 4.6
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40600
xen=enabled
# Xen 4.5
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40500
xen=enabled
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40200
xen=enabled
else
if test "$xen" = "enabled" ; then
feature_not_found "xen (unsupported version)" \
"Install a supported xen (xen 4.2 or newer)"
fi
xen=disabled
fi
if test "$xen" = enabled; then
if test $xen_ctrl_version -ge 40701 ; then
xen_libs="$xen_libs $xen_stable_libs "
fi
fi
fi
fi
##########################################
# RDMA needs OpenFabrics libraries
if test "$rdma" != "no" ; then
cat > $TMPC <<EOF
#include <rdma/rdma_cma.h>
int main(void) { return 0; }
EOF
rdma_libs="-lrdmacm -libverbs -libumad"
if compile_prog "" "$rdma_libs" ; then
rdma="yes"
else
if test "$rdma" = "yes" ; then
error_exit \
" OpenFabrics librdmacm/libibverbs/libibumad not present." \
" Your options:" \
" (1) Fast: Install infiniband packages (devel) from your distro." \
" (2) Cleanest: Install libraries from www.openfabrics.org" \
" (3) Also: Install softiwarp if you don't have RDMA hardware"
fi
rdma="no"
fi
fi
##########################################
# PVRDMA detection
cat > $TMPC <<EOF &&
#include <sys/mman.h>
int
main(void)
{
char buf = 0;
void *addr = &buf;
addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED);
return 0;
}
EOF
if test "$rdma" = "yes" ; then
case "$pvrdma" in
"")
if compile_prog "" ""; then
pvrdma="yes"
else
pvrdma="no"
fi
;;
"yes")
if ! compile_prog "" ""; then
error_exit "PVRDMA is not supported since mremap is not implemented"
fi
pvrdma="yes"
;;
"no")
pvrdma="no"
;;
esac
else
if test "$pvrdma" = "yes" ; then
error_exit "PVRDMA requires rdma suppport"
fi
pvrdma="no"
fi
# Let's see if enhanced reg_mr is supported
if test "$pvrdma" = "yes" ; then
cat > $TMPC <<EOF &&
#include <infiniband/verbs.h>
int
main(void)
{
struct ibv_mr *mr;
struct ibv_pd *pd = NULL;
size_t length = 10;
uint64_t iova = 0;
int access = 0;
void *addr = NULL;
mr = ibv_reg_mr_iova(pd, addr, length, iova, access);
ibv_dereg_mr(mr);
return 0;
}
EOF
if ! compile_prog "" "-libverbs"; then
QEMU_CFLAGS="$QEMU_CFLAGS -DLEGACY_RDMA_REG_MR"
fi
fi
##########################################
# xfsctl() probe, used for file-posix.c
if test "$xfs" != "no" ; then
cat > $TMPC << EOF
#include <stddef.h> /* NULL */
#include <xfs/xfs.h>
int main(void)
{
xfsctl(NULL, 0, 0, NULL);
return 0;
}
EOF
if compile_prog "" "" ; then
xfs="yes"
else
if test "$xfs" = "yes" ; then
feature_not_found "xfs" "Install xfsprogs/xfslibs devel"
fi
xfs=no
fi
fi
##########################################
# plugin linker support probe
if test "$plugins" != "no"; then
#########################################
# See if --dynamic-list is supported by the linker
ld_dynamic_list="no"
cat > $TMPTXT <<EOF
{
foo;
};
EOF
cat > $TMPC <<EOF
#include <stdio.h>
void foo(void);
void foo(void)
{
printf("foo\n");
}
int main(void)
{
foo();
return 0;
}
EOF
if compile_prog "" "-Wl,--dynamic-list=$TMPTXT" ; then
ld_dynamic_list="yes"
fi
#########################################
# See if -exported_symbols_list is supported by the linker
ld_exported_symbols_list="no"
cat > $TMPTXT <<EOF
_foo
EOF
if compile_prog "" "-Wl,-exported_symbols_list,$TMPTXT" ; then
ld_exported_symbols_list="yes"
fi
if test "$ld_dynamic_list" = "no" &&
test "$ld_exported_symbols_list" = "no" ; then
if test "$plugins" = "yes"; then
error_exit \
"Plugin support requires dynamic linking and specifying a set of symbols " \
"that are exported to plugins. Unfortunately your linker doesn't " \
"support the flag (--dynamic-list or -exported_symbols_list) used " \
"for this purpose."
else
plugins="no"
fi
else
plugins="yes"
fi
fi
##########################################
# glib support probe
glib_req_ver=2.56
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-export-2.0"
elif test "$plugins" = "yes"; then
glib_modules="$glib_modules gmodule-no-export-2.0"
fi
for i in $glib_modules; do
if $pkg_config --atleast-version=$glib_req_ver $i; then
glib_cflags=$($pkg_config --cflags $i)
glib_libs=$($pkg_config --libs $i)
else
error_exit "glib-$glib_req_ver $i is required to compile QEMU"
fi
done
# This workaround is required due to a bug in pkg-config file for glib as it
# doesn't define GLIB_STATIC_COMPILATION for pkg-config --static
if test "$static" = yes && test "$mingw32" = yes; then
glib_cflags="-DGLIB_STATIC_COMPILATION $glib_cflags"
fi
if ! test "$gio" = "no"; then
pass=no
if $pkg_config --atleast-version=$glib_req_ver gio-2.0; then
gio_cflags=$($pkg_config --cflags gio-2.0)
gio_libs=$($pkg_config --libs gio-2.0)
gdbus_codegen=$($pkg_config --variable=gdbus_codegen gio-2.0)
if ! has "$gdbus_codegen"; then
gdbus_codegen=
fi
# Check that the libraries actually work -- Ubuntu 18.04 ships
# with pkg-config --static --libs data for gio-2.0 that is missing
# -lblkid and will give a link error.
cat > $TMPC <<EOF
#include <gio/gio.h>
int main(void)
{
g_dbus_proxy_new_sync(0, 0, 0, 0, 0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "$gio_cflags" "$gio_libs" ; then
pass=yes
else
pass=no
fi
if test "$pass" = "yes" &&
$pkg_config --atleast-version=$glib_req_ver gio-unix-2.0; then
gio_cflags="$gio_cflags $($pkg_config --cflags gio-unix-2.0)"
gio_libs="$gio_libs $($pkg_config --libs gio-unix-2.0)"
fi
fi
if test "$pass" = "no"; then
if test "$gio" = "yes"; then
feature_not_found "gio" "Install libgio >= 2.0"
else
gio=no
fi
else
gio=yes
fi
fi
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 10:00:45 +01:00
# Sanity check that the current size_t matches the
# size that glib thinks it should be. This catches
# problems on multi-arch where people try to build
# 32-bit QEMU while pointing at 64-bit glib headers
cat > $TMPC <<EOF
#include <glib.h>
#include <unistd.h>
#define QEMU_BUILD_BUG_ON(x) \
typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
int main(void) {
QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
return 0;
}
EOF
if ! compile_prog "$glib_cflags" "$glib_libs" ; then
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 10:00:45 +01:00
error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
"You probably need to set PKG_CONFIG_LIBDIR"\
"to point to the right pkg-config files for your"\
"build target"
fi
# Silence clang warnings triggered by glib < 2.57.2
cat > $TMPC << EOF
#include <glib.h>
typedef struct Foo {
int i;
} Foo;
static void foo_free(Foo *f)
{
g_free(f);
}
G_DEFINE_AUTOPTR_CLEANUP_FUNC(Foo, foo_free);
int main(void) { return 0; }
EOF
if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
if cc_has_warning_flag "-Wno-unused-function"; then
glib_cflags="$glib_cflags -Wno-unused-function"
CONFIGURE_CFLAGS="$CONFIGURE_CFLAGS -Wno-unused-function"
fi
fi
##########################################
# SHA command probe for modules
if test "$modules" = yes; then
shacmd_probe="sha1sum sha1 shasum"
for c in $shacmd_probe; do
if has $c; then
shacmd="$c"
break
fi
done
if test "$shacmd" = ""; then
error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
fi
fi
##########################################
# libssh probe
if test "$libssh" != "no" ; then
block/ssh: Bump minimum libssh version to 0.8.7 It has been over two years since RHEL-8 was released, and thus per the platform build policy, we no longer need to support RHEL-7 as a build target. So from the RHEL-7 perspective, we do not have to support libssh v0.7 anymore now. Let's look at the versions from other distributions and operating systems - according to repology.org, current shipping versions are: RHEL-8: 0.9.4 Debian Buster: 0.8.7 openSUSE Leap 15.2: 0.8.7 Ubuntu LTS 18.04: 0.8.0 * Ubuntu LTS 20.04: 0.9.3 FreeBSD: 0.9.5 Fedora 33: 0.9.5 Fedora 34: 0.9.5 OpenBSD: 0.9.5 macOS HomeBrew: 0.9.5 HaikuPorts: 0.9.5 * The version of libssh in Ubuntu 18.04 claims to be 0.8.0 from the name of the package, but in reality it is a 0.7 patched up as a Frankenstein monster with patches from the 0.8 development branch. This gave us some headaches in the past already and so it never worked with QEMU. All attempts to get it supported have failed in the past, patches for QEMU have never been merged and a request to Ubuntu to fix it in their 18.04 distro has been ignored: https://bugs.launchpad.net/ubuntu/+source/libssh/+bug/1847514 Thus we really should ignore the libssh in Ubuntu 18.04 in QEMU, too. Fix it by bumping the minimum libssh version to something that is greater than 0.8.0 now. Debian Buster and openSUSE Leap have the oldest version and so 0.8.7 is the new minimum. Signed-off-by: Thomas Huth <thuth@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Richard W.M. Jones <rjones@redhat.com> Message-Id: <20210519155859.344569-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-05-19 17:58:59 +02:00
if $pkg_config --exists "libssh >= 0.8.7"; then
libssh_cflags=$($pkg_config libssh --cflags)
libssh_libs=$($pkg_config libssh --libs)
libssh=yes
else
if test "$libssh" = "yes" ; then
error_exit "libssh required for --enable-libssh"
fi
libssh=no
fi
fi
##########################################
# TPM emulation is only on POSIX
if test "$tpm" = ""; then
if test "$mingw32" = "yes"; then
tpm=no
else
tpm=yes
fi
elif test "$tpm" = "yes"; then
if test "$mingw32" = "yes" ; then
error_exit "TPM emulation only available on POSIX systems"
fi
fi
##########################################
# fdt probe
case "$fdt" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} dtc"
;;
esac
##########################################
# opengl probe (for sdl2, gtk)
if test "$opengl" != "no" ; then
epoxy=no
if $pkg_config epoxy; then
cat > $TMPC << EOF
#include <epoxy/egl.h>
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
epoxy=yes
fi
fi
if test "$epoxy" = "yes" ; then
opengl_cflags="$($pkg_config --cflags epoxy)"
opengl_libs="$($pkg_config --libs epoxy)"
opengl=yes
else
if test "$opengl" = "yes" ; then
feature_not_found "opengl" "Please install epoxy with EGL"
fi
opengl_cflags=""
opengl_libs=""
opengl=no
fi
fi
##########################################
# libnuma probe
if test "$numa" != "no" ; then
cat > $TMPC << EOF
#include <numa.h>
int main(void) { return numa_available(); }
EOF
if compile_prog "" "-lnuma" ; then
numa=yes
numa_libs="-lnuma"
else
if test "$numa" = "yes" ; then
feature_not_found "numa" "install numactl devel"
fi
numa=no
fi
fi
# check for usbfs
have_usbfs=no
if test "$linux_user" = "yes"; then
cat > $TMPC << EOF
#include <linux/usbdevice_fs.h>
#ifndef USBDEVFS_GET_CAPABILITIES
#error "USBDEVFS_GET_CAPABILITIES undefined"
#endif
#ifndef USBDEVFS_DISCONNECT_CLAIM
#error "USBDEVFS_DISCONNECT_CLAIM undefined"
#endif
int main(void)
{
return 0;
}
EOF
if compile_prog "" ""; then
have_usbfs=yes
fi
fi
##########################################
# check if we have VSS SDK headers for win
if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
test "$vss_win32_sdk" != "no" ; then
case "$vss_win32_sdk" in
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
"") vss_win32_include="-isystem $source_path" ;;
*\ *) # The SDK is installed in "Program Files" by default, but we cannot
# handle path with spaces. So we symlink the headers into ".sdk/vss".
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
vss_win32_include="-isystem $source_path/.sdk/vss"
symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
;;
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
*) vss_win32_include="-isystem $vss_win32_sdk"
esac
cat > $TMPC << EOF
#define __MIDL_user_allocate_free_DEFINED__
#include <inc/win2003/vss.h>
int main(void) { return VSS_CTX_BACKUP; }
EOF
if compile_prog "$vss_win32_include" "" ; then
guest_agent_with_vss="yes"
QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include"
libs_qga="-lole32 -loleaut32 -lshlwapi -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
qga_vss_provider="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb"
else
if test "$vss_win32_sdk" != "" ; then
echo "ERROR: Please download and install Microsoft VSS SDK:"
echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490"
echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
echo "ERROR: scripts/extract-vsssdk-headers setup.exe"
echo "ERROR: The headers are extracted in the directory \`inc'."
feature_not_found "VSS support"
fi
guest_agent_with_vss="no"
fi
fi
##########################################
# lookup Windows platform SDK (if not specified)
# The SDK is needed only to build .tlb (type library) file of guest agent
# VSS provider from the source. It is usually unnecessary because the
# pre-compiled .tlb file is included.
if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
test "$guest_agent_with_vss" = "yes" ; then
if test -z "$win_sdk"; then
programfiles="$PROGRAMFILES"
test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432"
if test -n "$programfiles"; then
win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null
else
feature_not_found "Windows SDK"
fi
elif test "$win_sdk" = "no"; then
win_sdk=""
fi
fi
##########################################
# check if mingw environment provides a recent ntddscsi.h
if test "$mingw32" = "yes" && test "$guest_agent" != "no"; then
cat > $TMPC << EOF
#include <windows.h>
#include <ntddscsi.h>
int main(void) {
#if !defined(IOCTL_SCSI_GET_ADDRESS)
#error Missing required ioctl definitions
#endif
SCSI_ADDRESS addr = { .Lun = 0, .TargetId = 0, .PathId = 0 };
return addr.Lun;
}
EOF
if compile_prog "" "" ; then
guest_agent_ntddscsi=yes
libs_qga="-lsetupapi -lcfgmgr32 $libs_qga"
fi
fi
##########################################
# capstone
case "$capstone" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} capstone"
;;
esac
##########################################
# check and set a backend for coroutine
# We prefer ucontext, but it's not always possible. The fallback
# is sigcontext. On Windows the only valid backend is the Windows
# specific one.
ucontext_works=no
if test "$darwin" != "yes"; then
cat > $TMPC << EOF
#include <ucontext.h>
#ifdef __stub_makecontext
#error Ignoring glibc stub makecontext which will always fail
#endif
int main(void) { makecontext(0, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
ucontext_works=yes
fi
fi
if test "$coroutine" = ""; then
if test "$mingw32" = "yes"; then
coroutine=win32
elif test "$ucontext_works" = "yes"; then
coroutine=ucontext
else
coroutine=sigaltstack
fi
else
case $coroutine in
windows)
if test "$mingw32" != "yes"; then
error_exit "'windows' coroutine backend only valid for Windows"
fi
# Unfortunately the user visible backend name doesn't match the
# coroutine-*.c filename for this case, so we have to adjust it here.
coroutine=win32
;;
ucontext)
if test "$ucontext_works" != "yes"; then
feature_not_found "ucontext"
fi
;;
sigaltstack)
if test "$mingw32" = "yes"; then
error_exit "only the 'windows' coroutine backend is valid for Windows"
fi
;;
*)
error_exit "unknown coroutine backend $coroutine"
;;
esac
fi
if test "$coroutine_pool" = ""; then
coroutine_pool=yes
fi
if test "$debug_stack_usage" = "yes"; then
if test "$coroutine_pool" = "yes"; then
echo "WARN: disabling coroutine pool for stack usage debugging"
coroutine_pool=no
fi
fi
##################################################
# SafeStack
if test "$safe_stack" = "yes"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
#if ! __has_feature(safe_stack)
#error SafeStack Disabled
#endif
return 0;
}
EOF
flag="-fsanitize=safe-stack"
# Check that safe-stack is supported and enabled.
if compile_prog "-Werror $flag" "$flag"; then
# Flag needed both at compilation and at linking
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
else
error_exit "SafeStack not supported by your compiler"
fi
if test "$coroutine" != "ucontext"; then
error_exit "SafeStack is only supported by the coroutine backend ucontext"
fi
else
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
#if defined(__has_feature)
#if __has_feature(safe_stack)
#error SafeStack Enabled
#endif
#endif
return 0;
}
EOF
if test "$safe_stack" = "no"; then
# Make sure that safe-stack is disabled
if ! compile_prog "-Werror" ""; then
# SafeStack was already enabled, try to explicitly remove the feature
flag="-fno-sanitize=safe-stack"
if ! compile_prog "-Werror $flag" "$flag"; then
error_exit "Configure cannot disable SafeStack"
fi
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
fi
else # "$safe_stack" = ""
# Set safe_stack to yes or no based on pre-existing flags
if compile_prog "-Werror" ""; then
safe_stack="no"
else
safe_stack="yes"
if test "$coroutine" != "ucontext"; then
error_exit "SafeStack is only supported by the coroutine backend ucontext"
fi
fi
fi
fi
########################################
# check if cpuid.h is usable.
cat > $TMPC << EOF
#include <cpuid.h>
int main(void) {
unsigned a, b, c, d;
int max = __get_cpuid_max(0, 0);
if (max >= 1) {
__cpuid(1, a, b, c, d);
}
if (max >= 7) {
__cpuid_count(7, 0, a, b, c, d);
}
return 0;
}
EOF
if compile_prog "" "" ; then
cpuid_h=yes
fi
##########################################
# avx2 optimization requirement check
#
# There is no point enabling this if cpuid.h is not usable,
# since we won't be able to select the new routines.
if test "$cpuid_h" = "yes" && test "$avx2_opt" != "no"; then
cat > $TMPC << EOF
#pragma GCC push_options
#pragma GCC target("avx2")
#include <cpuid.h>
#include <immintrin.h>
static int bar(void *a) {
__m256i x = *(__m256i *)a;
return _mm256_testz_si256(x, x);
}
int main(int argc, char *argv[]) { return bar(argv[0]); }
EOF
if compile_object "-Werror" ; then
avx2_opt="yes"
else
avx2_opt="no"
fi
fi
##########################################
# avx512f optimization requirement check
#
# There is no point enabling this if cpuid.h is not usable,
# since we won't be able to select the new routines.
# by default, it is turned off.
# if user explicitly want to enable it, check environment
if test "$cpuid_h" = "yes" && test "$avx512f_opt" = "yes"; then
cat > $TMPC << EOF
#pragma GCC push_options
#pragma GCC target("avx512f")
#include <cpuid.h>
#include <immintrin.h>
static int bar(void *a) {
__m512i x = *(__m512i *)a;
return _mm512_test_epi64_mask(x, x);
}
int main(int argc, char *argv[])
{
return bar(argv[0]);
}
EOF
if ! compile_object "-Werror" ; then
avx512f_opt="no"
fi
else
avx512f_opt="no"
fi
########################################
# check if __[u]int128_t is usable.
int128=no
cat > $TMPC << EOF
__int128_t a;
__uint128_t b;
int main (void) {
a = a + b;
b = a * b;
a = a * a;
return 0;
}
EOF
if compile_prog "" "" ; then
int128=yes
fi
#########################################
# See if 128-bit atomic operations are supported.
atomic128=no
if test "$int128" = "yes"; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
configure: Don't use the __atomic_*_16 functions for testing 128-bit support The test for 128-bit atomics is causing trouble with FreeBSD 12.2 and --enable-werror: cc -Werror -fPIE -DPIE -std=gnu99 -Wall -m64 -mcx16 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -Wstrict-prototypes -Wredundant-decls -Wundef -Wwrite-strings -Wmissing-prototypes -fno-strict-aliasing -fno-common -fwrapv -Wold-style-definition -Wtype-limits -Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers -Wempty-body -Wnested-externs -Wendif-labels -Wexpansion-to-defined -Wno-initializer-overrides -Wno-missing-include-dirs -Wno-shift-negative-value -Wno-string-plus-int -Wno-typedef-redefinition -Wno-tautological-type-limit-compare -fstack-protector-strong -o config-temp/qemu-conf.exe config-temp/qemu-conf.c -pie -Wl,-z,relro -Wl,-z,now -m64 -fstack-protector-strong config-temp/qemu-conf.c:4:7: error: implicit declaration of function '__atomic_load_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration] y = __atomic_load_16(&x, 0); ^ config-temp/qemu-conf.c:5:3: error: implicit declaration of function '__atomic_store_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration] __atomic_store_16(&x, y, 0); ^ config-temp/qemu-conf.c:5:3: note: did you mean '__atomic_load_16'? config-temp/qemu-conf.c:4:7: note: '__atomic_load_16' declared here y = __atomic_load_16(&x, 0); ^ config-temp/qemu-conf.c:6:3: error: implicit declaration of function '__atomic_compare_exchange_16' is invalid in C99 [-Werror,-Wimplicit-function-declaration] __atomic_compare_exchange_16(&x, &y, x, 0, 0, 0); ^ 3 errors generated. Looking for they way we are using atomic functions in QEMU, we are not using these functions with the _16 suffix anyway. Switch to the same functions that we use in the include/qemu/atomic.h header. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210317110512.583747-2-thuth@redhat.com> Message-Id: <20210323165308.15244-12-alex.bennee@linaro.org>
2021-03-23 17:52:57 +01:00
y = __atomic_load(&x, 0);
__atomic_store(&x, y, 0);
__atomic_compare_exchange(&x, &y, x, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
atomic128=yes
fi
fi
cmpxchg128=no
if test "$int128" = yes && test "$atomic128" = no; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
__sync_val_compare_and_swap_16(&x, y, x);
return 0;
}
EOF
if compile_prog "" "" ; then
cmpxchg128=yes
fi
fi
########################################
# check if ccache is interfering with
# semantic analysis of macros
unset CCACHE_CPP2
ccache_cpp2=no
cat > $TMPC << EOF
static const int Z = 1;
#define fn() ({ Z; })
#define TAUT(X) ((X) == Z)
#define PAREN(X, Y) (X == Y)
#define ID(X) (X)
int main(int argc, char *argv[])
{
int x = 0, y = 0;
x = ID(x);
x = fn();
fn();
if (PAREN(x, y)) return 0;
if (TAUT(Z)) return 0;
return 0;
}
EOF
if ! compile_object "-Werror"; then
ccache_cpp2=yes
fi
#################################################
# clang does not support glibc + FORTIFY_SOURCE.
if test "$fortify_source" != "no"; then
if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
fortify_source="no";
elif test -n "$cxx" && has $cxx &&
echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
fortify_source="no";
else
fortify_source="yes"
fi
fi
##########################################
# check for usable membarrier system call
if test "$membarrier" = "yes"; then
have_membarrier=no
if test "$mingw32" = "yes" ; then
have_membarrier=yes
elif test "$linux" = "yes" ; then
cat > $TMPC << EOF
#include <linux/membarrier.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <stdlib.h>
int main(void) {
syscall(__NR_membarrier, MEMBARRIER_CMD_QUERY, 0);
syscall(__NR_membarrier, MEMBARRIER_CMD_SHARED, 0);
exit(0);
}
EOF
if compile_prog "" "" ; then
have_membarrier=yes
fi
fi
if test "$have_membarrier" = "no"; then
feature_not_found "membarrier" "membarrier system call not available"
fi
else
# Do not enable it by default even for Mingw32, because it doesn't
# work on Wine.
membarrier=no
fi
##########################################
# check for usable AF_ALG environment
have_afalg=no
cat > $TMPC << EOF
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main(void) {
int sock;
sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
return sock;
}
EOF
if compile_prog "" "" ; then
have_afalg=yes
fi
if test "$crypto_afalg" = "yes"
then
if test "$have_afalg" != "yes"
then
error_exit "AF_ALG requested but could not be detected"
fi
fi
##########################################
# checks for sanitizers
have_asan=no
have_ubsan=no
have_asan_iface_h=no
have_asan_iface_fiber=no
if test "$sanitizers" = "yes" ; then
write_c_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then
have_asan=yes
fi
# we could use a simple skeleton for flags checks, but this also
# detect the static linking issue of ubsan, see also:
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) {
void *tmp = malloc(10);
if (tmp != NULL) {
return *(int *)(tmp + 2);
}
return 1;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then
have_ubsan=yes
fi
if check_include "sanitizer/asan_interface.h" ; then
have_asan_iface_h=yes
fi
cat > $TMPC << EOF
#include <sanitizer/asan_interface.h>
int main(void) {
__sanitizer_start_switch_fiber(0, 0, 0);
return 0;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then
have_asan_iface_fiber=yes
fi
fi
# Thread sanitizer is, for now, much noisier than the other sanitizers;
# keep it separate until that is not the case.
if test "$tsan" = "yes" && test "$sanitizers" = "yes"; then
error_exit "TSAN is not supported with other sanitiziers."
fi
have_tsan=no
have_tsan_iface_fiber=no
if test "$tsan" = "yes" ; then
write_c_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then
have_tsan=yes
fi
cat > $TMPC << EOF
#include <sanitizer/tsan_interface.h>
int main(void) {
__tsan_create_fiber(0);
return 0;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=thread" "" ; then
have_tsan_iface_fiber=yes
fi
fi
##########################################
# check for slirp
case "$slirp" in
auto | enabled | internal)
# Simpler to always update submodule, even if not needed.
git_submodules="${git_submodules} slirp"
;;
esac
# Check for slirp smbd dupport
: ${smbd=${SMBD-/usr/sbin/smbd}}
if test "$slirp_smbd" != "no" ; then
if test "$mingw32" = "yes" ; then
if test "$slirp_smbd" = "yes" ; then
error_exit "Host smbd not supported on this platform."
fi
slirp_smbd=no
else
slirp_smbd=yes
fi
fi
##########################################
# check for usable __NR_keyctl syscall
if test "$linux" = "yes" ; then
have_keyring=no
cat > $TMPC << EOF
#include <errno.h>
#include <asm/unistd.h>
#include <linux/keyctl.h>
#include <unistd.h>
int main(void) {
return syscall(__NR_keyctl, KEYCTL_READ, 0, NULL, NULL, 0);
}
EOF
if compile_prog "" "" ; then
have_keyring=yes
fi
fi
if test "$secret_keyring" != "no"
then
if test "$have_keyring" = "yes"
then
secret_keyring=yes
else
if test "$secret_keyring" = "yes"
then
error_exit "syscall __NR_keyctl requested, \
but not implemented on your system"
else
secret_keyring=no
fi
fi
fi
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
write_c_skeleton
if test "$gcov" = "yes" ; then
:
elif test "$fortify_source" = "yes" ; then
QEMU_CFLAGS="-U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $QEMU_CFLAGS"
debug=no
fi
case "$ARCH" in
alpha)
# Ensure there's only a single GP
QEMU_CFLAGS="-msmall-data $QEMU_CFLAGS"
;;
esac
if test "$gprof" = "yes" ; then
QEMU_CFLAGS="-p $QEMU_CFLAGS"
QEMU_LDFLAGS="-p $QEMU_LDFLAGS"
fi
if test "$have_asan" = "yes"; then
QEMU_CFLAGS="-fsanitize=address $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=address $QEMU_LDFLAGS"
if test "$have_asan_iface_h" = "no" ; then
echo "ASAN build enabled, but ASAN header missing." \
"Without code annotation, the report may be inferior."
elif test "$have_asan_iface_fiber" = "no" ; then
echo "ASAN build enabled, but ASAN header is too old." \
"Without code annotation, the report may be inferior."
fi
fi
if test "$have_tsan" = "yes" ; then
if test "$have_tsan_iface_fiber" = "yes" ; then
QEMU_CFLAGS="-fsanitize=thread $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=thread $QEMU_LDFLAGS"
else
error_exit "Cannot enable TSAN due to missing fiber annotation interface."
fi
elif test "$tsan" = "yes" ; then
error_exit "Cannot enable TSAN due to missing sanitize thread interface."
fi
if test "$have_ubsan" = "yes"; then
QEMU_CFLAGS="-fsanitize=undefined $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=undefined $QEMU_LDFLAGS"
fi
##########################################
# Exclude --warn-common with TSan to suppress warnings from the TSan libraries.
if test "$solaris" = "no" && test "$tsan" = "no"; then
if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
QEMU_LDFLAGS="-Wl,--warn-common $QEMU_LDFLAGS"
fi
fi
# Use ASLR, no-SEH and DEP if available
if test "$mingw32" = "yes" ; then
flags="--no-seh --nxcompat"
# Disable ASLR for debug builds to allow debugging with gdb
if test "$debug" = "no" ; then
flags="--dynamicbase $flags"
fi
for flag in $flags; do
if ld_has $flag ; then
QEMU_LDFLAGS="-Wl,$flag $QEMU_LDFLAGS"
fi
done
fi
# Probe for guest agent support/options
if [ "$guest_agent" != "no" ]; then
if [ "$softmmu" = no -a "$want_tools" = no ] ; then
guest_agent=no
elif [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
guest_agent=yes
elif [ "$guest_agent" != yes ]; then
guest_agent=no
else
error_exit "Guest agent is not supported on this platform"
fi
fi
# Guest agent Windows MSI package
if test "$QEMU_GA_MANUFACTURER" = ""; then
QEMU_GA_MANUFACTURER=QEMU
fi
if test "$QEMU_GA_DISTRO" = ""; then
QEMU_GA_DISTRO=Linux
fi
if test "$QEMU_GA_VERSION" = ""; then
QEMU_GA_VERSION=$(cat $source_path/VERSION)
fi
QEMU_GA_MSI_MINGW_DLL_PATH="$($pkg_config --variable=prefix glib-2.0)/bin"
# Mac OS X ships with a broken assembler
roms=
if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; } && \
test "$targetos" != "Darwin" && test "$targetos" != "SunOS" && \
test "$targetos" != "Haiku" && test "$softmmu" = yes ; then
# Different host OS linkers have different ideas about the name of the ELF
# emulation. Linux and OpenBSD/amd64 use 'elf_i386'; FreeBSD uses the _fbsd
# variant; OpenBSD/i386 uses the _obsd variant; and Windows uses i386pe.
for emu in elf_i386 elf_i386_fbsd elf_i386_obsd i386pe; do
if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
ld_i386_emulation="$emu"
roms="optionrom"
break
fi
done
fi
# Only build s390-ccw bios if we're on s390x and the compiler has -march=z900
# or -march=z10 (which is the lowest architecture level that Clang supports)
if test "$cpu" = "s390x" ; then
write_c_skeleton
compile_prog "-march=z900" ""
has_z900=$?
if [ $has_z900 = 0 ] || compile_object "-march=z10 -msoft-float -Werror"; then
if [ $has_z900 != 0 ]; then
echo "WARNING: Your compiler does not support the z900!"
echo " The s390-ccw bios will only work with guest CPUs >= z10."
fi
roms="$roms s390-ccw"
# SLOF is required for building the s390-ccw firmware on s390x,
# since it is using the libnet code from SLOF for network booting.
git_submodules="${git_submodules} roms/SLOF"
fi
fi
# Check that the C++ compiler exists and works with the C compiler.
# All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to don't miss any other that could be added.
if has $cxx; then
cat > $TMPC <<EOF
int c_function(void);
int main(void) { return c_function(); }
EOF
compile_object
cat > $TMPCXX <<EOF
extern "C" {
int c_function(void);
}
int c_function(void) { return 42; }
EOF
update_cxxflags
if do_cxx $CXXFLAGS $CONFIGURE_CXXFLAGS $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $QEMU_LDFLAGS; then
# C++ compiler $cxx works ok with C compiler $cc
:
else
echo "C++ compiler $cxx does not work with C compiler $cc"
echo "Disabling C++ specific optional code"
cxx=
fi
else
echo "No C++ compiler available; disabling C++ specific optional code"
cxx=
fi
if !(GIT="$git" "$source_path/scripts/git-submodule.sh" "$git_submodules_action" "$git_submodules"); then
exit 1
fi
config_host_mak="config-host.mak"
echo "# Automatically generated by configure - do not modify" > $config_host_mak
echo >> $config_host_mak
echo all: >> $config_host_mak
echo "GIT=$git" >> $config_host_mak
echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
echo "GIT_SUBMODULES_ACTION=$git_submodules_action" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
if test "$strip_opt" = "yes" ; then
echo "STRIP=${strip}" >> $config_host_mak
fi
if test "$mingw32" = "yes" ; then
echo "CONFIG_WIN32=y" >> $config_host_mak
if test "$guest_agent_with_vss" = "yes" ; then
echo "CONFIG_QGA_VSS=y" >> $config_host_mak
echo "QGA_VSS_PROVIDER=$qga_vss_provider" >> $config_host_mak
echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
fi
if test "$guest_agent_ntddscsi" = "yes" ; then
echo "CONFIG_QGA_NTDDSCSI=y" >> $config_host_mak
fi
echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
else
echo "CONFIG_POSIX=y" >> $config_host_mak
fi
if test "$linux" = "yes" ; then
echo "CONFIG_LINUX=y" >> $config_host_mak
fi
if test "$darwin" = "yes" ; then
echo "CONFIG_DARWIN=y" >> $config_host_mak
fi
if test "$solaris" = "yes" ; then
echo "CONFIG_SOLARIS=y" >> $config_host_mak
fi
if test "$haiku" = "yes" ; then
echo "CONFIG_HAIKU=y" >> $config_host_mak
fi
if test "$static" = "yes" ; then
echo "CONFIG_STATIC=y" >> $config_host_mak
fi
if test "$profiler" = "yes" ; then
echo "CONFIG_PROFILER=y" >> $config_host_mak
fi
if test "$want_tools" = "yes" ; then
echo "CONFIG_TOOLS=y" >> $config_host_mak
fi
if test "$guest_agent" = "yes" ; then
echo "CONFIG_GUEST_AGENT=y" >> $config_host_mak
fi
if test "$slirp_smbd" = "yes" ; then
echo "CONFIG_SLIRP_SMBD=y" >> $config_host_mak
echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
fi
if test "$l2tpv3" = "yes" ; then
echo "CONFIG_L2TPV3=y" >> $config_host_mak
fi
if test "$gprof" = "yes" ; then
echo "CONFIG_GPROF=y" >> $config_host_mak
fi
echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
if test "$block_drv_whitelist_tools" = "yes" ; then
echo "CONFIG_BDRV_WHITELIST_TOOLS=y" >> $config_host_mak
fi
if test "$xfs" = "yes" ; then
echo "CONFIG_XFS=y" >> $config_host_mak
fi
qemu_version=$(head $source_path/VERSION)
echo "PKGVERSION=$pkgversion" >>$config_host_mak
echo "SRC_PATH=$source_path" >> $config_host_mak
echo "TARGET_DIRS=$target_list" >> $config_host_mak
if test "$modules" = "yes"; then
# $shacmd can generate a hash started with digit, which the compiler doesn't
# like as an symbol. So prefix it with an underscore
echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
if test "$module_upgrades" = "yes"; then
echo "CONFIG_MODULE_UPGRADES=y" >> $config_host_mak
fi
if test "$have_usbfs" = "yes" ; then
echo "CONFIG_USBFS=y" >> $config_host_mak
fi
if test "$gio" = "yes" ; then
echo "CONFIG_GIO=y" >> $config_host_mak
echo "GIO_CFLAGS=$gio_cflags" >> $config_host_mak
echo "GIO_LIBS=$gio_libs" >> $config_host_mak
fi
if test "$gdbus_codegen" != "" ; then
echo "GDBUS_CODEGEN=$gdbus_codegen" >> $config_host_mak
fi
echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
if test "$xen" = "enabled" ; then
echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
echo "XEN_CFLAGS=$xen_cflags" >> $config_host_mak
echo "XEN_LIBS=$xen_libs" >> $config_host_mak
fi
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
if test "$vhost_scsi" = "yes" ; then
echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
fi
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_host_mak
fi
if test "$vhost_net_user" = "yes" ; then
echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
fi
if test "$vhost_net_vdpa" = "yes" ; then
echo "CONFIG_VHOST_NET_VDPA=y" >> $config_host_mak
fi
if test "$vhost_crypto" = "yes" ; then
echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
fi
if test "$vhost_vsock" = "yes" ; then
echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
if test "$vhost_user" = "yes" ; then
echo "CONFIG_VHOST_USER_VSOCK=y" >> $config_host_mak
fi
fi
if test "$vhost_kernel" = "yes" ; then
echo "CONFIG_VHOST_KERNEL=y" >> $config_host_mak
fi
if test "$vhost_user" = "yes" ; then
echo "CONFIG_VHOST_USER=y" >> $config_host_mak
fi
if test "$vhost_vdpa" = "yes" ; then
echo "CONFIG_VHOST_VDPA=y" >> $config_host_mak
fi
if test "$vhost_user_fs" = "yes" ; then
echo "CONFIG_VHOST_USER_FS=y" >> $config_host_mak
fi
if test "$membarrier" = "yes" ; then
echo "CONFIG_MEMBARRIER=y" >> $config_host_mak
fi
if test "$tcg" = "enabled" -a "$tcg_interpreter" = "true" ; then
echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
fi
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
fi
if test "$avx2_opt" = "yes" ; then
echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
fi
if test "$avx512f_opt" = "yes" ; then
echo "CONFIG_AVX512F_OPT=y" >> $config_host_mak
fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
echo "CONFIG_BSD=y" >> $config_host_mak
fi
if test "$qom_cast_debug" = "yes" ; then
echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
if test "$coroutine_pool" = "yes" ; then
echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
else
echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
fi
if test "$debug_stack_usage" = "yes" ; then
echo "CONFIG_DEBUG_STACK_USAGE=y" >> $config_host_mak
fi
if test "$crypto_afalg" = "yes" ; then
echo "CONFIG_AF_ALG=y" >> $config_host_mak
fi
if test "$have_asan_iface_fiber" = "yes" ; then
echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
fi
if test "$have_tsan" = "yes" && test "$have_tsan_iface_fiber" = "yes" ; then
echo "CONFIG_TSAN=y" >> $config_host_mak
fi
if test "$cpuid_h" = "yes" ; then
echo "CONFIG_CPUID_H=y" >> $config_host_mak
fi
if test "$int128" = "yes" ; then
echo "CONFIG_INT128=y" >> $config_host_mak
fi
if test "$atomic128" = "yes" ; then
echo "CONFIG_ATOMIC128=y" >> $config_host_mak
fi
if test "$cmpxchg128" = "yes" ; then
echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
fi
if test "$libssh" = "yes" ; then
echo "CONFIG_LIBSSH=y" >> $config_host_mak
echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
fi
if test "$live_block_migration" = "yes" ; then
echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
fi
if test "$tpm" = "yes"; then
echo 'CONFIG_TPM=y' >> $config_host_mak
fi
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak
fi
if test "$pvrdma" = "yes" ; then
echo "CONFIG_PVRDMA=y" >> $config_host_mak
fi
if test "$replication" = "yes" ; then
echo "CONFIG_REPLICATION=y" >> $config_host_mak
fi
if test "$debug_mutex" = "yes" ; then
echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
fi
if test "$bochs" = "yes" ; then
echo "CONFIG_BOCHS=y" >> $config_host_mak
fi
if test "$cloop" = "yes" ; then
echo "CONFIG_CLOOP=y" >> $config_host_mak
fi
if test "$dmg" = "yes" ; then
echo "CONFIG_DMG=y" >> $config_host_mak
fi
if test "$qcow1" = "yes" ; then
echo "CONFIG_QCOW1=y" >> $config_host_mak
fi
if test "$vdi" = "yes" ; then
echo "CONFIG_VDI=y" >> $config_host_mak
fi
if test "$vvfat" = "yes" ; then
echo "CONFIG_VVFAT=y" >> $config_host_mak
fi
if test "$qed" = "yes" ; then
echo "CONFIG_QED=y" >> $config_host_mak
fi
if test "$parallels" = "yes" ; then
echo "CONFIG_PARALLELS=y" >> $config_host_mak
fi
if test "$plugins" = "yes" ; then
echo "CONFIG_PLUGIN=y" >> $config_host_mak
# Copy the export object list to the build dir
if test "$ld_dynamic_list" = "yes" ; then
echo "CONFIG_HAS_LD_DYNAMIC_LIST=yes" >> $config_host_mak
ld_symbols=qemu-plugins-ld.symbols
cp "$source_path/plugins/qemu-plugins.symbols" $ld_symbols
elif test "$ld_exported_symbols_list" = "yes" ; then
echo "CONFIG_HAS_LD_EXPORTED_SYMBOLS_LIST=yes" >> $config_host_mak
ld64_symbols=qemu-plugins-ld64.symbols
echo "# Automatically generated by configure - do not modify" > $ld64_symbols
grep 'qemu_' "$source_path/plugins/qemu-plugins.symbols" | sed 's/;//g' | \
sed -E 's/^[[:space:]]*(.*)/_\1/' >> $ld64_symbols
else
error_exit \
"If \$plugins=yes, either \$ld_dynamic_list or " \
"\$ld_exported_symbols_list should have been set to 'yes'."
fi
fi
if test -n "$gdb_bin"; then
gdb_version=$($gdb_bin --version | head -n 1)
if version_ge ${gdb_version##* } 9.1; then
echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak
fi
fi
if test "$secret_keyring" = "yes" ; then
echo "CONFIG_SECRET_KEYRING=y" >> $config_host_mak
fi
echo "ROMS=$roms" >> $config_host_mak
echo "MAKE=$make" >> $config_host_mak
echo "PYTHON=$python" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
echo "MESON=$meson" >> $config_host_mak
echo "NINJA=$ninja" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
echo "HOST_CC=$host_cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "CONFIG_IASL=$iasl" >> $config_host_mak
fi
echo "AR=$ar" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CCAS=$ccas" >> $config_host_mak
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
echo "LD=$ld" >> $config_host_mak
echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak
echo "GLIB_LIBS=$glib_libs" >> $config_host_mak
configure: Really use local libfdt if the system one is too old QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-04-16 01:05:19 +02:00
echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak
echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
echo "LIBS_QGA=$libs_qga" >> $config_host_mak
if test "$rng_none" = "yes"; then
echo "CONFIG_RNG_NONE=y" >> $config_host_mak
fi
# use included Linux headers
if test "$linux" = "yes" ; then
mkdir -p linux-headers
case "$cpu" in
i386|x86_64|x32)
linux_arch=x86
;;
ppc|ppc64|ppc64le)
linux_arch=powerpc
;;
s390x)
linux_arch=s390
;;
aarch64)
linux_arch=arm64
;;
mips64)
linux_arch=mips
;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
;;
esac
# For non-KVM architectures we will not have asm headers
if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
fi
fi
for target in $target_list; do
target_dir="$target"
target_name=$(echo $target | cut -d '-' -f 1)
mkdir -p $target_dir
case $target in
*-user) symlink "../qemu-$target_name" "$target_dir/qemu-$target_name" ;;
*) symlink "../qemu-system-$target_name" "$target_dir/qemu-system-$target_name" ;;
esac
done
echo "CONFIG_QEMU_INTERP_PREFIX=$interp_prefix" | sed 's/%M/@0@/' >> $config_host_mak
if test "$default_targets" = "yes"; then
echo "CONFIG_DEFAULT_TARGETS=y" >> $config_host_mak
fi
if test "$numa" = "yes"; then
echo "CONFIG_NUMA=y" >> $config_host_mak
echo "NUMA_LIBS=$numa_libs" >> $config_host_mak
fi
if test "$ccache_cpp2" = "yes"; then
echo "export CCACHE_CPP2=y" >> $config_host_mak
fi
if test "$safe_stack" = "yes"; then
echo "CONFIG_SAFESTACK=y" >> $config_host_mak
fi
# If we're using a separate build tree, set it up now.
# DIRS are directories which we simply mkdir in the build tree;
# LINKS are things to symlink back into the source tree
# (these can be both files and directories).
# Caution: do not add files or directories here using wildcards. This
# will result in problems later if a new file matching the wildcard is
# added to the source tree -- nothing will cause configure to be rerun
# so the build tree will be missing the link back to the new file, and
# tests might fail. Prefer to keep the relevant files in their own
# directory and symlink the directory instead.
# UNLINK is used to remove symlinks from older development versions
# that might get into the way when doing "git update" without doing
# a "make distclean" in between.
DIRS="tests tests/tcg tests/qapi-schema tests/qtest/libqos"
DIRS="$DIRS tests/qtest tests/qemu-iotests tests/vm tests/fp tests/qgraph"
DIRS="$DIRS docs docs/interop fsdev scsi"
DIRS="$DIRS pc-bios/optionrom pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios"
DIRS="$DIRS contrib/plugins/"
LINKS="Makefile"
LINKS="$LINKS tests/tcg/Makefile.target"
LINKS="$LINKS pc-bios/optionrom/Makefile"
LINKS="$LINKS pc-bios/s390-ccw/Makefile"
LINKS="$LINKS roms/seabios/Makefile"
LINKS="$LINKS pc-bios/qemu-icon.bmp"
LINKS="$LINKS .gdbinit scripts" # scripts needed by relative path in .gdbinit
LINKS="$LINKS tests/acceptance tests/data"
LINKS="$LINKS tests/qemu-iotests/check"
LINKS="$LINKS python"
LINKS="$LINKS contrib/plugins/Makefile "
UNLINK="pc-bios/keymaps"
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.elf \
$source_path/pc-bios/*.lid \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
$source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/u-boot.* \
$source_path/pc-bios/edk2-*.fd.bz2 \
$source_path/pc-bios/palcode-* \
$source_path/pc-bios/qemu_vga.ndrv
do
LINKS="$LINKS pc-bios/$(basename $bios_file)"
done
mkdir -p $DIRS
for f in $LINKS ; do
if [ -e "$source_path/$f" ]; then
symlink "$source_path/$f" "$f"
fi
done
for f in $UNLINK ; do
if [ -L "$f" ]; then
rm -f "$f"
fi
done
(for i in $cross_cc_vars; do
export $i
done
export target_list source_path use_containers ARCH
$source_path/tests/tcg/configure.sh)
# temporary config to build submodules
for rom in seabios; do
config_mak=roms/$rom/config.mak
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
echo "AS=$as" >> $config_mak
echo "CCAS=$ccas" >> $config_mak
echo "CC=$cc" >> $config_mak
echo "BCC=bcc" >> $config_mak
echo "CPP=$cpp" >> $config_mak
echo "OBJCOPY=objcopy" >> $config_mak
echo "IASL=$iasl" >> $config_mak
echo "LD=$ld" >> $config_mak
echo "RANLIB=$ranlib" >> $config_mak
done
if test "$skip_meson" = no; then
cross="config-meson.cross.new"
meson_quote() {
echo "'$(echo $* | sed "s/ /','/g")'"
}
echo "# Automatically generated by configure - do not modify" > $cross
echo "[properties]" >> $cross
# unroll any custom device configs
for a in $device_archs; do
eval "c=\$devices_${a}"
echo "${a}-softmmu = '$c'" >> $cross
done
test -z "$cxx" && echo "link_language = 'c'" >> $cross
echo "[built-in options]" >> $cross
echo "c_args = [${CFLAGS:+$(meson_quote $CFLAGS)}]" >> $cross
echo "cpp_args = [${CXXFLAGS:+$(meson_quote $CXXFLAGS)}]" >> $cross
echo "c_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross
echo "cpp_link_args = [${LDFLAGS:+$(meson_quote $LDFLAGS)}]" >> $cross
echo "[binaries]" >> $cross
echo "c = [$(meson_quote $cc $CPU_CFLAGS)]" >> $cross
test -n "$cxx" && echo "cpp = [$(meson_quote $cxx $CPU_CFLAGS)]" >> $cross
test -n "$objcc" && echo "objc = [$(meson_quote $objcc $CPU_CFLAGS)]" >> $cross
echo "ar = [$(meson_quote $ar)]" >> $cross
echo "nm = [$(meson_quote $nm)]" >> $cross
echo "pkgconfig = [$(meson_quote $pkg_config_exe)]" >> $cross
echo "ranlib = [$(meson_quote $ranlib)]" >> $cross
if has $sdl2_config; then
echo "sdl2-config = [$(meson_quote $sdl2_config)]" >> $cross
fi
echo "strip = [$(meson_quote $strip)]" >> $cross
echo "windres = [$(meson_quote $windres)]" >> $cross
if test "$cross_compile" = "yes"; then
cross_arg="--cross-file config-meson.cross"
echo "[host_machine]" >> $cross
if test "$mingw32" = "yes" ; then
echo "system = 'windows'" >> $cross
fi
if test "$linux" = "yes" ; then
echo "system = 'linux'" >> $cross
fi
if test "$darwin" = "yes" ; then
echo "system = 'darwin'" >> $cross
fi
case "$ARCH" in
i386)
echo "cpu_family = 'x86'" >> $cross
;;
x86_64|x32)
echo "cpu_family = 'x86_64'" >> $cross
;;
ppc64le)
echo "cpu_family = 'ppc64'" >> $cross
;;
*)
echo "cpu_family = '$ARCH'" >> $cross
;;
esac
echo "cpu = '$cpu'" >> $cross
if test "$bigendian" = "yes" ; then
echo "endian = 'big'" >> $cross
else
echo "endian = 'little'" >> $cross
fi
else
cross_arg="--native-file config-meson.cross"
fi
mv $cross config-meson.cross
rm -rf meson-private meson-info meson-logs
run_meson() {
NINJA=$ninja $meson setup \
--prefix "$prefix" \
--libdir "$libdir" \
--libexecdir "$libexecdir" \
--bindir "$bindir" \
--includedir "$includedir" \
--datadir "$datadir" \
--mandir "$mandir" \
--sysconfdir "$sysconfdir" \
--localedir "$localedir" \
--localstatedir "$local_statedir" \
-Daudio_drv_list=$audio_drv_list \
-Ddefault_devices=$default_devices \
-Ddocdir="$docdir" \
-Dqemu_firmwarepath="$firmwarepath" \
-Dqemu_suffix="$qemu_suffix" \
-Dsphinx_build="$sphinx_build" \
-Dtrace_file="$trace_file" \
-Doptimization=$(if test "$debug" = yes; then echo 0; else echo 2; fi) \
-Ddebug=$(if test "$debug_info" = yes; then echo true; else echo false; fi) \
-Dwerror=$(if test "$werror" = yes; then echo true; else echo false; fi) \
-Dstrip=$(if test "$strip_opt" = yes; then echo true; else echo false; fi) \
-Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
-Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
-Db_lto=$lto -Dcfi=$cfi -Dtcg=$tcg -Dxen=$xen \
-Dcapstone=$capstone -Dfdt=$fdt -Dslirp=$slirp \
$(test -n "${LIB_FUZZING_ENGINE+xxx}" && echo "-Dfuzzing_engine=$LIB_FUZZING_ENGINE") \
$(if test "$default_feature" = no; then echo "-Dauto_features=disabled"; fi) \
"$@" $cross_arg "$PWD" "$source_path"
}
eval run_meson $meson_options
if test "$?" -ne 0 ; then
error_exit "meson setup failed"
fi
else
if test -f meson-private/cmd_line.txt; then
# Adjust old command line options whose type was changed
# Avoids having to use "setup --wipe" when Meson is upgraded
perl -i -ne '
s/^gettext = true$/gettext = auto/;
s/^gettext = false$/gettext = disabled/;
/^b_staticpic/ && next;
print;' meson-private/cmd_line.txt
fi
fi
if test -n "${deprecated_features}"; then
echo "Warning, deprecated features enabled."
echo "Please see docs/about/deprecated.rst"
echo " features: ${deprecated_features}"
fi
# Create list of config switches that should be poisoned in common code...
# but filter out CONFIG_TCG and CONFIG_USER_ONLY which are special.
target_configs_h=$(ls *-config-devices.h *-config-target.h 2>/dev/null)
if test -n "$target_configs_h" ; then
sed -n -e '/CONFIG_TCG/d' -e '/CONFIG_USER_ONLY/d' \
-e '/^#define / { s///; s/ .*//; s/^/#pragma GCC poison /p; }' \
$target_configs_h | sort -u > config-poison.h
else
:> config-poison.h
fi
# Save the configure command line for later reuse.
cat <<EOD >config.status
#!/bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
EOD
configure: preserve various environment variables in config.status The config.status script is auto-generated by configure upon completion. The intention is that config.status can be later invoked by the developer directly, or by make indirectly, to re-detect the same environment that configure originally used. The current config.status script, however, only contains a record of the command line arguments to configure. Various environment variables have an effect on what configure will find. In particular PKG_CONFIG_LIBDIR & PKG_CONFIG_PATH vars will affect what libraries pkg-config finds. The PATH var will affect what toolchain binaries and XXXX-config scripts are found. The LD_LIBRARY_PATH var will affect what libraries are found. Most commands have env variables that will override the name/path of the default version configure finds. All these key env variables should be recorded in the config.status script. Autoconf would also preserve CFLAGS, LDFLAGS, LIBS, CPPFLAGS, but QEMU deals with those differently, expecting extra flags to be set using configure args, rather than env variables. At the end of the script we also don't have the original values of those env vars, as we modify them during configure. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180904123603.10016-1-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-09-04 14:36:03 +02:00
preserve_env() {
envname=$1
eval envval=\$$envname
if test -n "$envval"
then
echo "$envname='$envval'" >> config.status
echo "export $envname" >> config.status
else
echo "unset $envname" >> config.status
fi
}
# Preserve various env variables that influence what
# features/build target configure will detect
preserve_env AR
preserve_env AS
preserve_env CC
preserve_env CPP
preserve_env CXX
preserve_env INSTALL
preserve_env LD
preserve_env LD_LIBRARY_PATH
preserve_env LIBTOOL
preserve_env MAKE
preserve_env NM
preserve_env OBJCOPY
preserve_env PATH
preserve_env PKG_CONFIG
preserve_env PKG_CONFIG_LIBDIR
preserve_env PKG_CONFIG_PATH
preserve_env PYTHON
preserve_env SDL2_CONFIG
preserve_env SMBD
preserve_env STRIP
preserve_env WINDRES
printf "exec" >>config.status
for i in "$0" "$@"; do
test "$i" = --skip-meson || printf " %s" "$(quote_sh "$i")" >>config.status
done
echo ' "$@"' >>config.status
chmod +x config.status
rm -r "$TMPDIR1"