qemu-e2k/configure

8327 lines
216 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# qemu configure script (c) 2003 Fabrice Bellard
#
# Unset some variables known to interfere with behavior of common tools,
# just as autoconf does.
CLICOLOR_FORCE= GREP_OPTIONS=
unset CLICOLOR_FORCE GREP_OPTIONS
# Don't allow CCACHE, if present, to use cached results of compile tests!
export CCACHE_RECACHE=yes
# Temporary directory used for files created while
# configure runs. Since it is in the build directory
# we can safely blow away any previous version of it
# (and we need not jump through hoops to try to delete
# it when configure exits.)
TMPDIR1="config-temp"
rm -rf "${TMPDIR1}"
mkdir -p "${TMPDIR1}"
if [ $? -ne 0 ]; then
echo "ERROR: failed to create temporary directory"
exit 1
fi
TMPB="qemu-conf"
TMPC="${TMPDIR1}/${TMPB}.c"
TMPO="${TMPDIR1}/${TMPB}.o"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
TMPCXX="${TMPDIR1}/${TMPB}.cxx"
TMPE="${TMPDIR1}/${TMPB}.exe"
TMPMO="${TMPDIR1}/${TMPB}.mo"
TMPTXT="${TMPDIR1}/${TMPB}.txt"
rm -f config.log
# Print a helpful header at the top of config.log
echo "# QEMU configure log $(date)" >> config.log
printf "# Configured with:" >> config.log
printf " '%s'" "$0" "$@" >> config.log
echo >> config.log
echo "#" >> config.log
print_error() {
(echo
echo "ERROR: $1"
while test -n "$2"; do
echo " $2"
shift
done
echo) >&2
}
error_exit() {
print_error "$@"
exit 1
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
do_compiler() {
# Run the compiler, capturing its output to the log. First argument
# is compiler binary to execute.
local compiler="$1"
shift
if test -n "$BASH_VERSION"; then eval '
echo >>config.log "
funcs: ${FUNCNAME[*]}
lines: ${BASH_LINENO[*]}"
'; fi
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
echo $compiler "$@" >> config.log
$compiler "$@" >> config.log 2>&1 || return $?
# Test passed. If this is an --enable-werror build, rerun
# the test with -Werror and bail out if it fails. This
# makes warning-generating-errors in configure test code
# obvious to developers.
if test "$werror" != "yes"; then
return 0
fi
# Don't bother rerunning the compile if we were already using -Werror
case "$*" in
*-Werror*)
return 0
;;
esac
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
echo $compiler -Werror "$@" >> config.log
$compiler -Werror "$@" >> config.log 2>&1 && return $?
error_exit "configure test passed without -Werror but failed with -Werror." \
"This is probably a bug in the configure script. The failing command" \
"will be at the bottom of config.log." \
"You can run configure with --disable-werror to bypass this check."
}
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
do_cc() {
do_compiler "$cc" "$@"
}
do_cxx() {
do_compiler "$cxx" "$@"
}
update_cxxflags() {
# Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
# options which some versions of GCC's C++ compiler complain about
# because they only make sense for C programs.
QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS"
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
for arg in $QEMU_CFLAGS; do
case $arg in
-Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
-Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
;;
-std=gnu99)
QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }"-std=gnu++98"
;;
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
*)
QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
;;
esac
done
}
compile_object() {
local_cflags="$1"
do_cc $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
}
compile_prog() {
local_cflags="$1"
local_ldflags="$2"
do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $QEMU_LDFLAGS $local_ldflags
}
# symbolically link $1 to $2. Portable version of "ln -sf".
symlink() {
rm -rf "$2"
mkdir -p "$(dirname "$2")"
ln -s "$1" "$2"
}
# check whether a command is available to this shell (may be either an
# executable or a builtin)
has() {
type "$1" >/dev/null 2>&1
}
# search for an executable in PATH
path_of() {
local_command="$1"
local_ifs="$IFS"
local_dir=""
# pathname has a dir component?
if [ "${local_command#*/}" != "$local_command" ]; then
if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
echo "$local_command"
return 0
fi
fi
if [ -z "$local_command" ]; then
return 1
fi
IFS=:
for local_dir in $PATH; do
if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
echo "$local_dir/$local_command"
IFS="${local_ifs:-$(printf ' \t\n')}"
return 0
fi
done
# not found
IFS="${local_ifs:-$(printf ' \t\n')}"
return 1
}
have_backend () {
echo "$trace_backends" | grep "$1" >/dev/null
}
glob() {
eval test -z '"${1#'"$2"'}"'
}
supported_hax_target() {
test "$hax" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
case "${1%-softmmu}" in
i386|x86_64)
return 0
;;
esac
return 1
}
supported_kvm_target() {
test "$kvm" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
case "${1%-softmmu}:$cpu" in
arm:arm | aarch64:aarch64 | \
i386:i386 | i386:x86_64 | i386:x32 | \
x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
mips:mips | mipsel:mips | \
ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | ppc64:ppc64le | \
s390x:s390x)
return 0
;;
esac
return 1
}
supported_xen_target() {
test "$xen" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
# Only i386 and x86_64 provide the xenpv machine.
case "${1%-softmmu}" in
i386|x86_64)
return 0
;;
esac
return 1
}
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
supported_hvf_target() {
test "$hvf" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
case "${1%-softmmu}" in
x86_64)
return 0
;;
esac
return 1
}
supported_whpx_target() {
test "$whpx" = "yes" || return 1
glob "$1" "*-softmmu" || return 1
case "${1%-softmmu}" in
i386|x86_64)
return 0
;;
esac
return 1
}
supported_target() {
case "$1" in
*-softmmu)
;;
*-linux-user)
if test "$linux" != "yes"; then
print_error "Target '$target' is only available on a Linux host"
return 1
fi
;;
*-bsd-user)
if test "$bsd" != "yes"; then
print_error "Target '$target' is only available on a BSD host"
return 1
fi
;;
*)
print_error "Invalid target name '$target'"
return 1
;;
esac
test "$tcg" = "yes" && return 0
supported_kvm_target "$1" && return 0
supported_xen_target "$1" && return 0
supported_hax_target "$1" && return 0
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
supported_hvf_target "$1" && return 0
supported_whpx_target "$1" && return 0
print_error "TCG disabled, but hardware accelerator not available for '$target'"
return 1
}
ld_has() {
$ld --help 2>/dev/null | grep ".$1" >/dev/null 2>&1
}
# make source path absolute
source_path=$(cd "$(dirname -- "$0")"; pwd)
if printf %s\\n "$source_path" "$PWD" | grep -q "[[:space:]:]";
then
error_exit "main directory cannot contain spaces nor colons"
fi
# default parameters
cpu=""
iasl="iasl"
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
cross_prefix=""
audio_drv_list=""
block_drv_rw_whitelist=""
block_drv_ro_whitelist=""
host_cc="cc"
libs_cpu=""
libs_softmmu=""
libs_tools=""
audio_win_int=""
libs_qga=""
debug_info="yes"
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
stack_protector=""
use_containers="yes"
gdb_bin=$(command -v "gdb-multiarch" || command -v "gdb")
if test -e "$source_path/.git"
then
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
git_update=yes
git_submodules="ui/keycodemapdb"
git_submodules="$git_submodules tests/fp/berkeley-testfloat-3"
git_submodules="$git_submodules tests/fp/berkeley-softfloat-3"
else
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
git_update=no
git_submodules=""
if ! test -f "$source_path/ui/keycodemapdb/README"
then
echo
echo "ERROR: missing file $source_path/ui/keycodemapdb/README"
echo
echo "This is not a GIT checkout but module content appears to"
echo "be missing. Do not use 'git archive' or GitHub download links"
echo "to acquire QEMU source archives. Non-GIT builds are only"
echo "supported with source archives linked from:"
echo
echo " https://www.qemu.org/download/#source"
echo
echo "Developers working with GIT can use scripts/archive-source.sh"
echo "if they need to create valid source archives."
echo
exit 1
fi
fi
git="git"
# Don't accept a target_list environment variable.
unset target_list
unset target_list_exclude
# Default value for a variable defining feature "foo".
# * foo="no" feature will only be used if --enable-foo arg is given
# * foo="" feature will be searched for, and if found, will be used
# unless --disable-foo is given
# * foo="yes" this value will only be set by --enable-foo flag.
# feature will searched for,
# if not found, configure exits with error
#
# Always add --enable-foo and --disable-foo command line args.
# Distributions want to ensure that several features are compiled in, and it
# is impossible without a --enable-foo that exits if a feature is not found.
brlapi=""
curl=""
curses=""
docs=""
fdt=""
netmap="no"
sdl=""
sdl_image=""
virtfs=""
mpath=""
vnc="yes"
sparse="no"
vde=""
vnc_sasl=""
vnc_jpeg=""
vnc_png=""
xkbcommon=""
xen=""
xen_ctrl_version=""
xen_pci_passthrough=""
linux_aio=""
linux_io_uring=""
cap_ng=""
attr=""
libattr=""
xfs=""
tcg="yes"
membarrier=""
vhost_net=""
vhost_crypto=""
vhost_scsi=""
vhost_vsock=""
vhost_user=""
vhost_user_fs=""
kvm="no"
hax="no"
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
hvf="no"
whpx="no"
rdma=""
pvrdma=""
gprof="no"
debug_tcg="no"
debug="no"
sanitizers="no"
fortify_source=""
strip_opt="yes"
tcg_interpreter="no"
bigendian="no"
mingw32="no"
gcov="no"
gcov_tool="gcov"
EXESUF=""
DSOSUF=".so"
LDFLAGS_SHARED="-shared"
modules="no"
module_upgrades="no"
prefix="/usr/local"
mandir="\${prefix}/share/man"
datadir="\${prefix}/share"
firmwarepath="\${prefix}/share/qemu-firmware"
qemu_docdir="\${prefix}/share/doc/qemu"
bindir="\${prefix}/bin"
2011-05-15 11:08:59 +02:00
libdir="\${prefix}/lib"
libexecdir="\${prefix}/libexec"
includedir="\${prefix}/include"
sysconfdir="\${prefix}/etc"
local_statedir="\${prefix}/var"
confsuffix="/qemu"
slirp=""
oss_lib=""
bsd="no"
linux="no"
solaris="no"
profiler="no"
cocoa="no"
softmmu="yes"
linux_user="no"
bsd_user="no"
blobs="yes"
edk2_blobs="no"
pkgversion=""
pie=""
qom_cast_debug="yes"
trace_backends="log"
trace_file="trace"
spice=""
rbd=""
smartcard=""
libusb=""
usb_redir=""
opengl=""
opengl_dmabuf="no"
cpuid_h="no"
avx2_opt=""
zlib="yes"
capstone=""
lzo=""
snappy=""
bzip2=""
lzfse=""
zstd=""
guest_agent=""
guest_agent_with_vss="no"
guest_agent_ntddscsi="no"
guest_agent_msi=""
vss_win32_sdk=""
win_sdk="no"
want_tools=""
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
libiscsi=""
libnfs=""
coroutine=""
coroutine_pool=""
debug_stack_usage="no"
crypto_afalg="no"
seccomp=""
glusterfs=""
glusterfs_xlator_opt="no"
glusterfs_discard="no"
glusterfs_fallocate="no"
glusterfs_zerofill="no"
glusterfs_ftruncate_has_stat="no"
glusterfs_iocb_has_stat="no"
gtk=""
gtk_gl="no"
tls_priority="NORMAL"
gnutls=""
nettle=""
nettle_xts="no"
gcrypt=""
gcrypt_hmac="no"
gcrypt_xts="no"
qemu_private_xts="yes"
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
auth_pam=""
vte=""
virglrenderer=""
tpm=""
libssh=""
live_block_migration="yes"
numa=""
tcmalloc="no"
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
jemalloc="no"
replication="yes"
vxhs=""
bochs="yes"
cloop="yes"
dmg="yes"
qcow1="yes"
vdi="yes"
vvfat="yes"
qed="yes"
parallels="yes"
sheepdog="yes"
libxml2=""
debug_mutex="no"
libpmem=""
default_devices="yes"
plugins="no"
fuzzing="no"
supported_cpu="no"
supported_os="no"
bogus_os="no"
malloc_trim=""
# parse CC options first
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--cross-prefix=*) cross_prefix="$optarg"
;;
--cc=*) CC="$optarg"
;;
--cxx=*) CXX="$optarg"
;;
--cpu=*) cpu="$optarg"
;;
--extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
QEMU_LDFLAGS="$QEMU_LDFLAGS $optarg"
;;
--extra-cxxflags=*) QEMU_CXXFLAGS="$QEMU_CXXFLAGS $optarg"
;;
--extra-ldflags=*) QEMU_LDFLAGS="$QEMU_LDFLAGS $optarg"
EXTRA_LDFLAGS="$optarg"
;;
--enable-debug-info) debug_info="yes"
;;
--disable-debug-info) debug_info="no"
;;
--cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option"
;;
--cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*}
eval "cross_cc_cflags_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_cflags_${cc_arch}"
;;
--cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
cc_archs="$cc_archs $cc_arch"
eval "cross_cc_${cc_arch}=\$optarg"
cross_cc_vars="$cross_cc_vars cross_cc_${cc_arch}"
;;
esac
done
# OS specific
# Using uname is really, really broken. Once we have the right set of checks
# we can eliminate its usage altogether.
# Preferred compiler:
# ${CC} (if set)
# ${cross_prefix}gcc (if cross-prefix specified)
# system compiler
if test -z "${CC}${cross_prefix}"; then
cc="$host_cc"
else
cc="${CC-${cross_prefix}gcc}"
fi
if test -z "${CXX}${cross_prefix}"; then
cxx="c++"
else
cxx="${CXX-${cross_prefix}g++}"
fi
ar="${AR-${cross_prefix}ar}"
as="${AS-${cross_prefix}as}"
ccas="${CCAS-$cc}"
cpp="${CPP-$cc -E}"
objcopy="${OBJCOPY-${cross_prefix}objcopy}"
ld="${LD-${cross_prefix}ld}"
ranlib="${RANLIB-${cross_prefix}ranlib}"
nm="${NM-${cross_prefix}nm}"
strip="${STRIP-${cross_prefix}strip}"
windres="${WINDRES-${cross_prefix}windres}"
pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
query_pkg_config() {
"${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
}
pkg_config=query_pkg_config
sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
# If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
ARFLAGS="${ARFLAGS-rv}"
# default flags for all hosts
# We use -fwrapv to tell the compiler that we require a C dialect where
# left shift of signed integers is well defined and has the expected
# 2s-complement style results. (Both clang and gcc agree that it
# provides these semantics.)
QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv -std=gnu99 $QEMU_CFLAGS"
QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
QEMU_INCLUDES="-iquote . -iquote \$(SRC_PATH) -iquote \$(SRC_PATH)/accel/tcg -iquote \$(SRC_PATH)/include"
QEMU_INCLUDES="$QEMU_INCLUDES -iquote \$(SRC_PATH)/disas/libvixl"
if test "$debug_info" = "yes"; then
CFLAGS="-g $CFLAGS"
fi
# running configure in the source tree?
# we know that's the case if configure is there.
if test -f "./configure"; then
pwd_is_source_path="y"
else
pwd_is_source_path="n"
fi
check_define() {
cat > $TMPC <<EOF
#if !defined($1)
#error $1 not defined
#endif
int main(void) { return 0; }
EOF
compile_object
}
check_include() {
cat > $TMPC <<EOF
#include <$1>
int main(void) { return 0; }
EOF
compile_object
}
write_c_skeleton() {
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
}
write_c_fuzzer_skeleton() {
cat > $TMPC <<EOF
#include <stdint.h>
#include <sys/types.h>
int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size);
int LLVMFuzzerTestOneInput(const uint8_t *Data, size_t Size) { return 0; }
EOF
}
if check_define __linux__ ; then
targetos="Linux"
elif check_define _WIN32 ; then
targetos='MINGW32'
elif check_define __OpenBSD__ ; then
targetos='OpenBSD'
elif check_define __sun__ ; then
targetos='SunOS'
elif check_define __HAIKU__ ; then
targetos='Haiku'
elif check_define __FreeBSD__ ; then
targetos='FreeBSD'
elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then
targetos='GNU/kFreeBSD'
elif check_define __DragonFly__ ; then
targetos='DragonFly'
elif check_define __NetBSD__; then
targetos='NetBSD'
elif check_define __APPLE__; then
targetos='Darwin'
else
# This is a fatal error, but don't report it yet, because we
# might be going to just print the --help text, or it might
# be the result of a missing compiler.
targetos='bogus'
bogus_os='yes'
fi
# Some host OSes need non-standard checks for which CPU to use.
# Note that these checks are broken for cross-compilation: if you're
# cross-compiling to one of these OSes then you'll need to specify
# the correct CPU with the --cpu option.
case $targetos in
Darwin)
# on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
# run 64-bit userspace code.
# If the user didn't specify a CPU explicitly and the kernel says this is
# 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
cpu="x86_64"
fi
;;
SunOS)
# $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
cpu="x86_64"
fi
esac
if test ! -z "$cpu" ; then
# command line argument
:
elif check_define __i386__ ; then
cpu="i386"
elif check_define __x86_64__ ; then
if check_define __ILP32__ ; then
cpu="x32"
else
cpu="x86_64"
fi
elif check_define __sparc__ ; then
if check_define __arch64__ ; then
cpu="sparc64"
else
cpu="sparc"
fi
elif check_define _ARCH_PPC ; then
if check_define _ARCH_PPC64 ; then
if check_define _LITTLE_ENDIAN ; then
cpu="ppc64le"
else
cpu="ppc64"
fi
else
cpu="ppc"
fi
elif check_define __mips__ ; then
cpu="mips"
elif check_define __s390__ ; then
if check_define __s390x__ ; then
cpu="s390x"
else
cpu="s390"
fi
elif check_define __riscv ; then
if check_define _LP64 ; then
cpu="riscv64"
else
cpu="riscv32"
fi
elif check_define __arm__ ; then
cpu="arm"
elif check_define __aarch64__ ; then
cpu="aarch64"
else
cpu=$(uname -m)
fi
ARCH=
# Normalise host CPU name and set ARCH.
# Note that this case should only have supported host CPUs, not guests.
case "$cpu" in
ppc|ppc64|s390x|sparc64|x32|riscv32|riscv64)
supported_cpu="yes"
;;
ppc64le)
ARCH="ppc64"
supported_cpu="yes"
;;
i386|i486|i586|i686|i86pc|BePC)
cpu="i386"
supported_cpu="yes"
;;
x86_64|amd64)
cpu="x86_64"
supported_cpu="yes"
;;
armv*b|armv*l|arm)
cpu="arm"
supported_cpu="yes"
;;
aarch64)
cpu="aarch64"
supported_cpu="yes"
;;
mips*)
cpu="mips"
supported_cpu="yes"
;;
sparc|sun4[cdmuv])
cpu="sparc"
supported_cpu="yes"
;;
*)
# This will result in either an error or falling back to TCI later
ARCH=unknown
;;
esac
if test -z "$ARCH"; then
ARCH="$cpu"
fi
# OS specific
# host *BSD for user mode
HOST_VARIANT_DIR=""
case $targetos in
MINGW32*)
mingw32="yes"
hax="yes"
vhost_user="no"
audio_possible_drivers="dsound sdl"
if check_include dsound.h; then
audio_drv_list="dsound"
else
audio_drv_list=""
fi
supported_os="yes"
pie="no"
;;
GNU/kFreeBSD)
bsd="yes"
audio_drv_list="oss try-sdl"
audio_possible_drivers="oss sdl pa"
;;
FreeBSD)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="oss try-sdl"
audio_possible_drivers="oss sdl pa"
# needed for kinfo_getvmmap(3) in libutil.h
LIBS="-lutil $LIBS"
# needed for kinfo_getproc
libs_qga="-lutil $libs_qga"
netmap="" # enable netmap autodetect
HOST_VARIANT_DIR="freebsd"
supported_os="yes"
;;
DragonFly)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="oss try-sdl"
audio_possible_drivers="oss sdl pa"
HOST_VARIANT_DIR="dragonfly"
;;
NetBSD)
bsd="yes"
hax="yes"
make="${MAKE-gmake}"
audio_drv_list="oss try-sdl"
audio_possible_drivers="oss sdl"
oss_lib="-lossaudio"
HOST_VARIANT_DIR="netbsd"
supported_os="yes"
;;
OpenBSD)
bsd="yes"
make="${MAKE-gmake}"
audio_drv_list="try-sdl"
audio_possible_drivers="sdl"
HOST_VARIANT_DIR="openbsd"
supported_os="yes"
;;
Darwin)
bsd="yes"
darwin="yes"
hax="yes"
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
hvf="yes"
LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
if [ "$cpu" = "x86_64" ] ; then
QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS"
fi
cocoa="yes"
audio_drv_list="coreaudio try-sdl"
audio_possible_drivers="coreaudio sdl"
QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS"
libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
# Disable attempts to use ObjectiveC features in os/object.h since they
# won't work when we're compiling with gcc as a C compiler.
QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
HOST_VARIANT_DIR="darwin"
supported_os="yes"
;;
SunOS)
solaris="yes"
make="${MAKE-gmake}"
install="${INSTALL-ginstall}"
smbd="${SMBD-/usr/sfw/sbin/smbd}"
if test -f /usr/include/sys/soundcard.h ; then
audio_drv_list="oss try-sdl"
fi
audio_possible_drivers="oss sdl"
# needed for CMSG_ macros in sys/socket.h
QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
# needed for TIOCWIN* defines in termios.h
QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
solarisnetlibs="-lsocket -lnsl -lresolv"
LIBS="$solarisnetlibs $LIBS"
libs_qga="$solarisnetlibs $libs_qga"
;;
Haiku)
haiku="yes"
QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
LIBS="-lposix_error_mapper -lnetwork $LIBS"
;;
Linux)
audio_drv_list="try-pa oss"
audio_possible_drivers="oss alsa sdl pa"
linux="yes"
linux_user="yes"
kvm="yes"
QEMU_INCLUDES="-isystem \$(SRC_PATH)/linux-headers -isystem $PWD/linux-headers $QEMU_INCLUDES"
supported_os="yes"
libudev="yes"
;;
esac
if [ "$bsd" = "yes" ] ; then
if [ "$darwin" != "yes" ] ; then
bsd_user="yes"
fi
fi
: ${make=${MAKE-make}}
: ${install=${INSTALL-install}}
# We prefer python 3.x. A bare 'python' is traditionally
# python 2.x, but some distros have it as python 3.x, so
# we check that too
python=
for binary in "${PYTHON-python3}" python
do
if has "$binary"
then
python=$(command -v "$binary")
break
fi
done
sphinx_build=
for binary in sphinx-build-3 sphinx-build
do
if has "$binary"
then
sphinx_build=$(command -v "$binary")
break
fi
done
# Check for ancillary tools used in testing
genisoimage=
for binary in genisoimage
do
if has $binary
then
genisoimage=$(command -v "$binary")
break
fi
done
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
if has clang; then
objcc=clang
else
objcc="$cc"
fi
if test "$mingw32" = "yes" ; then
EXESUF=".exe"
DSOSUF=".dll"
# MinGW needs -mthreads for TLS and macro _MT.
QEMU_CFLAGS="-mthreads $QEMU_CFLAGS"
LIBS="-lwinmm -lws2_32 $LIBS"
write_c_skeleton;
if compile_prog "" "-liberty" ; then
LIBS="-liberty $LIBS"
fi
prefix="c:/Program Files/QEMU"
mandir="\${prefix}"
datadir="\${prefix}"
qemu_docdir="\${prefix}"
bindir="\${prefix}"
sysconfdir="\${prefix}"
local_statedir=
confsuffix=""
libs_qga="-lws2_32 -lwinmm -lpowrprof -lwtsapi32 -lwininet -liphlpapi -lnetapi32 $libs_qga"
fi
werror=""
for opt do
optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
case "$opt" in
--help|-h) show_help=yes
;;
--version|-V) exec cat $source_path/VERSION
;;
--prefix=*) prefix="$optarg"
;;
--interp-prefix=*) interp_prefix="$optarg"
;;
--cross-prefix=*)
;;
--cc=*)
;;
--host-cc=*) host_cc="$optarg"
;;
--cxx=*)
;;
--iasl=*) iasl="$optarg"
;;
--objcc=*) objcc="$optarg"
;;
--make=*) make="$optarg"
;;
--install=*) install="$optarg"
;;
--python=*) python="$optarg"
;;
--sphinx-build=*) sphinx_build="$optarg"
;;
--gcov=*) gcov_tool="$optarg"
;;
--smbd=*) smbd="$optarg"
;;
--extra-cflags=*)
;;
--extra-cxxflags=*)
;;
--extra-ldflags=*)
;;
--enable-debug-info)
;;
--disable-debug-info)
;;
--cross-cc-*)
;;
--enable-modules)
modules="yes"
;;
--disable-modules)
modules="no"
;;
--disable-module-upgrades) module_upgrades="no"
;;
--enable-module-upgrades) module_upgrades="yes"
;;
--cpu=*)
;;
--target-list=*) target_list="$optarg"
if test "$target_list_exclude"; then
error_exit "Can't mix --target-list with --target-list-exclude"
fi
;;
--target-list-exclude=*) target_list_exclude="$optarg"
if test "$target_list"; then
error_exit "Can't mix --target-list-exclude with --target-list"
fi
;;
--enable-trace-backends=*) trace_backends="$optarg"
;;
# XXX: backwards compatibility
--enable-trace-backend=*) trace_backends="$optarg"
;;
--with-trace-file=*) trace_file="$optarg"
;;
--with-default-devices) default_devices="yes"
;;
--without-default-devices) default_devices="no"
;;
--enable-gprof) gprof="yes"
;;
--enable-gcov) gcov="yes"
;;
--static)
static="yes"
QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
;;
--mandir=*) mandir="$optarg"
;;
--bindir=*) bindir="$optarg"
;;
2011-05-15 11:08:59 +02:00
--libdir=*) libdir="$optarg"
;;
--libexecdir=*) libexecdir="$optarg"
;;
--includedir=*) includedir="$optarg"
;;
--datadir=*) datadir="$optarg"
;;
--with-confsuffix=*) confsuffix="$optarg"
;;
--docdir=*) qemu_docdir="$optarg"
;;
--sysconfdir=*) sysconfdir="$optarg"
;;
--localstatedir=*) local_statedir="$optarg"
;;
--firmwarepath=*) firmwarepath="$optarg"
;;
--host=*|--build=*|\
--disable-dependency-tracking|\
--sbindir=*|--sharedstatedir=*|\
--oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
--htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
# These switches are silently ignored, for compatibility with
# autoconf-generated configure scripts. This allows QEMU's
# configure to be used by RPM and similar macros that set
# lots of directory switches by default.
;;
--disable-sdl) sdl="no"
;;
--enable-sdl) sdl="yes"
;;
--disable-sdl-image) sdl_image="no"
;;
--enable-sdl-image) sdl_image="yes"
;;
--disable-qom-cast-debug) qom_cast_debug="no"
;;
--enable-qom-cast-debug) qom_cast_debug="yes"
;;
--disable-virtfs) virtfs="no"
;;
--enable-virtfs) virtfs="yes"
;;
--disable-mpath) mpath="no"
;;
--enable-mpath) mpath="yes"
;;
--disable-vnc) vnc="no"
;;
--enable-vnc) vnc="yes"
;;
--oss-lib=*) oss_lib="$optarg"
;;
--audio-drv-list=*) audio_drv_list="$optarg"
;;
--block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
;;
--enable-debug-tcg) debug_tcg="yes"
;;
--disable-debug-tcg) debug_tcg="no"
;;
--enable-debug)
# Enable debugging options that aren't excessively noisy
debug_tcg="yes"
debug_mutex="yes"
debug="yes"
strip_opt="no"
fortify_source="no"
;;
--enable-sanitizers) sanitizers="yes"
;;
--disable-sanitizers) sanitizers="no"
;;
--enable-sparse) sparse="yes"
;;
--disable-sparse) sparse="no"
;;
--disable-strip) strip_opt="no"
;;
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
--disable-vnc-sasl) vnc_sasl="no"
;;
--enable-vnc-sasl) vnc_sasl="yes"
;;
--disable-vnc-jpeg) vnc_jpeg="no"
;;
--enable-vnc-jpeg) vnc_jpeg="yes"
;;
--disable-vnc-png) vnc_png="no"
;;
--enable-vnc-png) vnc_png="yes"
;;
--disable-slirp) slirp="no"
;;
--enable-slirp=git) slirp="git"
;;
--enable-slirp=system) slirp="system"
;;
--disable-vde) vde="no"
;;
--enable-vde) vde="yes"
;;
--disable-netmap) netmap="no"
;;
--enable-netmap) netmap="yes"
;;
--disable-xen) xen="no"
;;
--enable-xen) xen="yes"
;;
--disable-xen-pci-passthrough) xen_pci_passthrough="no"
;;
--enable-xen-pci-passthrough) xen_pci_passthrough="yes"
;;
--disable-brlapi) brlapi="no"
;;
--enable-brlapi) brlapi="yes"
;;
--disable-kvm) kvm="no"
;;
--enable-kvm) kvm="yes"
;;
--disable-hax) hax="no"
;;
--enable-hax) hax="yes"
;;
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
--disable-hvf) hvf="no"
;;
--enable-hvf) hvf="yes"
;;
--disable-whpx) whpx="no"
;;
--enable-whpx) whpx="yes"
;;
--disable-tcg-interpreter) tcg_interpreter="no"
;;
--enable-tcg-interpreter) tcg_interpreter="yes"
;;
--disable-cap-ng) cap_ng="no"
;;
--enable-cap-ng) cap_ng="yes"
;;
--disable-tcg) tcg="no"
;;
--enable-tcg) tcg="yes"
;;
--disable-malloc-trim) malloc_trim="no"
;;
--enable-malloc-trim) malloc_trim="yes"
;;
2010-03-24 10:26:51 +01:00
--disable-spice) spice="no"
;;
--enable-spice) spice="yes"
;;
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
--disable-libiscsi) libiscsi="no"
;;
--enable-libiscsi) libiscsi="yes"
;;
--disable-libnfs) libnfs="no"
;;
--enable-libnfs) libnfs="yes"
;;
--enable-profiler) profiler="yes"
;;
--disable-cocoa) cocoa="no"
;;
--enable-cocoa)
cocoa="yes" ;
audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
;;
--disable-system) softmmu="no"
;;
--enable-system) softmmu="yes"
;;
--disable-user)
linux_user="no" ;
bsd_user="no" ;
;;
--enable-user) ;;
--disable-linux-user) linux_user="no"
;;
--enable-linux-user) linux_user="yes"
;;
--disable-bsd-user) bsd_user="no"
;;
--enable-bsd-user) bsd_user="yes"
;;
--enable-pie) pie="yes"
;;
--disable-pie) pie="no"
;;
--enable-werror) werror="yes"
;;
--disable-werror) werror="no"
;;
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
--enable-stack-protector) stack_protector="yes"
;;
--disable-stack-protector) stack_protector="no"
;;
--disable-curses) curses="no"
;;
--enable-curses) curses="yes"
;;
--disable-iconv) iconv="no"
;;
--enable-iconv) iconv="yes"
;;
--disable-curl) curl="no"
;;
--enable-curl) curl="yes"
;;
--disable-fdt) fdt="no"
;;
--enable-fdt) fdt="yes"
;;
--disable-linux-aio) linux_aio="no"
;;
--enable-linux-aio) linux_aio="yes"
;;
--disable-linux-io-uring) linux_io_uring="no"
;;
--enable-linux-io-uring) linux_io_uring="yes"
;;
--disable-attr) attr="no"
;;
--enable-attr) attr="yes"
;;
--disable-membarrier) membarrier="no"
;;
--enable-membarrier) membarrier="yes"
;;
--disable-blobs) blobs="no"
;;
--with-pkgversion=*) pkgversion="$optarg"
;;
--with-coroutine=*) coroutine="$optarg"
;;
--disable-coroutine-pool) coroutine_pool="no"
;;
--enable-coroutine-pool) coroutine_pool="yes"
;;
--enable-debug-stack-usage) debug_stack_usage="yes"
;;
--enable-crypto-afalg) crypto_afalg="yes"
;;
--disable-crypto-afalg) crypto_afalg="no"
;;
--disable-docs) docs="no"
;;
--enable-docs) docs="yes"
;;
--disable-vhost-net) vhost_net="no"
;;
--enable-vhost-net) vhost_net="yes"
;;
--disable-vhost-crypto) vhost_crypto="no"
;;
--enable-vhost-crypto) vhost_crypto="yes"
;;
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
--disable-vhost-scsi) vhost_scsi="no"
;;
--enable-vhost-scsi) vhost_scsi="yes"
;;
--disable-vhost-vsock) vhost_vsock="no"
;;
--enable-vhost-vsock) vhost_vsock="yes"
;;
--disable-vhost-user-fs) vhost_user_fs="no"
;;
--enable-vhost-user-fs) vhost_user_fs="yes"
;;
--disable-opengl) opengl="no"
;;
--enable-opengl) opengl="yes"
;;
--disable-rbd) rbd="no"
;;
--enable-rbd) rbd="yes"
;;
--disable-xfsctl) xfs="no"
;;
--enable-xfsctl) xfs="yes"
;;
--disable-smartcard) smartcard="no"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
;;
--enable-smartcard) smartcard="yes"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
;;
--disable-libusb) libusb="no"
;;
--enable-libusb) libusb="yes"
;;
--disable-usb-redir) usb_redir="no"
;;
--enable-usb-redir) usb_redir="yes"
;;
--disable-zlib-test) zlib="no"
;;
--disable-lzo) lzo="no"
;;
--enable-lzo) lzo="yes"
;;
--disable-snappy) snappy="no"
;;
--enable-snappy) snappy="yes"
;;
--disable-bzip2) bzip2="no"
;;
--enable-bzip2) bzip2="yes"
;;
--enable-lzfse) lzfse="yes"
;;
--disable-lzfse) lzfse="no"
;;
--disable-zstd) zstd="no"
;;
--enable-zstd) zstd="yes"
;;
--enable-guest-agent) guest_agent="yes"
;;
--disable-guest-agent) guest_agent="no"
;;
--enable-guest-agent-msi) guest_agent_msi="yes"
;;
--disable-guest-agent-msi) guest_agent_msi="no"
;;
--with-vss-sdk) vss_win32_sdk=""
;;
--with-vss-sdk=*) vss_win32_sdk="$optarg"
;;
--without-vss-sdk) vss_win32_sdk="no"
;;
--with-win-sdk) win_sdk=""
;;
--with-win-sdk=*) win_sdk="$optarg"
;;
--without-win-sdk) win_sdk="no"
;;
--enable-tools) want_tools="yes"
;;
--disable-tools) want_tools="no"
;;
--enable-seccomp) seccomp="yes"
;;
--disable-seccomp) seccomp="no"
;;
--disable-glusterfs) glusterfs="no"
;;
--disable-avx2) avx2_opt="no"
;;
--enable-avx2) avx2_opt="yes"
;;
--disable-avx512f) avx512f_opt="no"
;;
--enable-avx512f) avx512f_opt="yes"
;;
--enable-glusterfs) glusterfs="yes"
;;
--disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
;;
--enable-vhdx|--disable-vhdx)
echo "$0: $opt is obsolete, VHDX driver is always built" >&2
;;
--enable-uuid|--disable-uuid)
echo "$0: $opt is obsolete, UUID support is always built" >&2
;;
--disable-gtk) gtk="no"
;;
--enable-gtk) gtk="yes"
;;
--tls-priority=*) tls_priority="$optarg"
;;
--disable-gnutls) gnutls="no"
;;
--enable-gnutls) gnutls="yes"
;;
--disable-nettle) nettle="no"
;;
--enable-nettle) nettle="yes"
;;
--disable-gcrypt) gcrypt="no"
;;
--enable-gcrypt) gcrypt="yes"
;;
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
--disable-auth-pam) auth_pam="no"
;;
--enable-auth-pam) auth_pam="yes"
;;
--enable-rdma) rdma="yes"
;;
--disable-rdma) rdma="no"
;;
--enable-pvrdma) pvrdma="yes"
;;
--disable-pvrdma) pvrdma="no"
;;
--disable-vte) vte="no"
;;
--enable-vte) vte="yes"
;;
--disable-virglrenderer) virglrenderer="no"
;;
--enable-virglrenderer) virglrenderer="yes"
;;
--disable-tpm) tpm="no"
;;
--enable-tpm) tpm="yes"
;;
--disable-libssh) libssh="no"
;;
--enable-libssh) libssh="yes"
;;
--disable-live-block-migration) live_block_migration="no"
;;
--enable-live-block-migration) live_block_migration="yes"
;;
--disable-numa) numa="no"
;;
--enable-numa) numa="yes"
;;
--disable-libxml2) libxml2="no"
;;
--enable-libxml2) libxml2="yes"
;;
--disable-tcmalloc) tcmalloc="no"
;;
--enable-tcmalloc) tcmalloc="yes"
;;
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
--disable-jemalloc) jemalloc="no"
;;
--enable-jemalloc) jemalloc="yes"
;;
--disable-replication) replication="no"
;;
--enable-replication) replication="yes"
;;
--disable-vxhs) vxhs="no"
;;
--enable-vxhs) vxhs="yes"
;;
--disable-bochs) bochs="no"
;;
--enable-bochs) bochs="yes"
;;
--disable-cloop) cloop="no"
;;
--enable-cloop) cloop="yes"
;;
--disable-dmg) dmg="no"
;;
--enable-dmg) dmg="yes"
;;
--disable-qcow1) qcow1="no"
;;
--enable-qcow1) qcow1="yes"
;;
--disable-vdi) vdi="no"
;;
--enable-vdi) vdi="yes"
;;
--disable-vvfat) vvfat="no"
;;
--enable-vvfat) vvfat="yes"
;;
--disable-qed) qed="no"
;;
--enable-qed) qed="yes"
;;
--disable-parallels) parallels="no"
;;
--enable-parallels) parallels="yes"
;;
--disable-sheepdog) sheepdog="no"
;;
--enable-sheepdog) sheepdog="yes"
;;
--disable-vhost-user) vhost_user="no"
;;
--enable-vhost-user) vhost_user="yes"
;;
--disable-vhost-kernel) vhost_kernel="no"
;;
--enable-vhost-kernel) vhost_kernel="yes"
;;
--disable-capstone) capstone="no"
;;
--enable-capstone) capstone="yes"
;;
--enable-capstone=git) capstone="git"
;;
--enable-capstone=system) capstone="system"
;;
--with-git=*) git="$optarg"
;;
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
--enable-git-update) git_update=yes
;;
--disable-git-update) git_update=no
;;
--enable-debug-mutex) debug_mutex=yes
;;
--disable-debug-mutex) debug_mutex=no
;;
--enable-libpmem) libpmem=yes
;;
--disable-libpmem) libpmem=no
;;
--enable-xkbcommon) xkbcommon=yes
;;
--disable-xkbcommon) xkbcommon=no
;;
--enable-plugins) plugins="yes"
;;
--disable-plugins) plugins="no"
;;
--enable-containers) use_containers="yes"
;;
--disable-containers) use_containers="no"
;;
--enable-fuzzing) fuzzing=yes
;;
--disable-fuzzing) fuzzing=no
;;
--gdb=*) gdb_bin="$optarg"
;;
*)
echo "ERROR: unknown option $opt"
echo "Try '$0 --help' for more information"
exit 1
;;
esac
done
case "$cpu" in
ppc)
CPU_CFLAGS="-m32"
QEMU_LDFLAGS="-m32 $QEMU_LDFLAGS"
;;
ppc64)
CPU_CFLAGS="-m64"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
sparc)
CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
QEMU_LDFLAGS="-m32 -mv8plus $QEMU_LDFLAGS"
;;
sparc64)
CPU_CFLAGS="-m64 -mcpu=ultrasparc"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
s390)
CPU_CFLAGS="-m31"
QEMU_LDFLAGS="-m31 $QEMU_LDFLAGS"
;;
s390x)
CPU_CFLAGS="-m64"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
i386)
CPU_CFLAGS="-m32"
QEMU_LDFLAGS="-m32 $QEMU_LDFLAGS"
;;
x86_64)
# ??? Only extremely old AMD cpus do not have cmpxchg16b.
# If we truly care, we should simply detect this case at
# runtime and generate the fallback to serial emulation.
CPU_CFLAGS="-m64 -mcx16"
QEMU_LDFLAGS="-m64 $QEMU_LDFLAGS"
;;
x32)
CPU_CFLAGS="-mx32"
QEMU_LDFLAGS="-mx32 $QEMU_LDFLAGS"
;;
# No special flags required for other host CPUs
esac
eval "cross_cc_${cpu}=\$host_cc"
cross_cc_vars="$cross_cc_vars cross_cc_${cpu}"
QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
# For user-mode emulation the host arch has to be one we explicitly
# support, even if we're using TCI.
if [ "$ARCH" = "unknown" ]; then
bsd_user="no"
linux_user="no"
fi
default_target_list=""
mak_wilds=""
if [ "$softmmu" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
fi
if [ "$linux_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
fi
if [ "$bsd_user" = "yes" ]; then
mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
fi
if test -z "$target_list_exclude"; then
for config in $mak_wilds; do
default_target_list="${default_target_list} $(basename "$config" .mak)"
done
else
exclude_list=$(echo "$target_list_exclude" | sed -e 's/,/ /g')
for config in $mak_wilds; do
target="$(basename "$config" .mak)"
exclude="no"
for excl in $exclude_list; do
if test "$excl" = "$target"; then
exclude="yes"
break;
fi
done
if test "$exclude" = "no"; then
default_target_list="${default_target_list} $target"
fi
done
fi
# Enumerate public trace backends for --help output
trace_backend_list=$(echo $(grep -le '^PUBLIC = True$' "$source_path"/scripts/tracetool/backend/*.py | sed -e 's/^.*\/\(.*\)\.py$/\1/'))
if test x"$show_help" = x"yes" ; then
cat << EOF
Usage: configure [options]
Options: [defaults in brackets after descriptions]
Standard options:
--help print this message
--prefix=PREFIX install in PREFIX [$prefix]
--interp-prefix=PREFIX where to find shared libraries, etc.
use %M for cpu name [$interp_prefix]
--target-list=LIST set target list (default: build everything)
$(echo Available targets: $default_target_list | \
fold -s -w 53 | sed -e 's/^/ /')
--target-list-exclude=LIST exclude a set of targets from the default target-list
Advanced options (experts only):
--cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
--cc=CC use C compiler CC [$cc]
--iasl=IASL use ACPI compiler IASL [$iasl]
--host-cc=CC use C compiler CC [$host_cc] for code run at
build time
--cxx=CXX use C++ compiler CXX [$cxx]
--objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
--extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
--extra-cxxflags=CXXFLAGS append extra C++ compiler flags QEMU_CXXFLAGS
--extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
--cross-cc-ARCH=CC use compiler when building ARCH guest test cases
--cross-cc-flags-ARCH= use compiler flags when building ARCH guest tests
--make=MAKE use specified make [$make]
--install=INSTALL use specified install [$install]
--python=PYTHON use specified python [$python]
--sphinx-build=SPHINX use specified sphinx-build [$sphinx_build]
--smbd=SMBD use specified smbd [$smbd]
--with-git=GIT use specified git [$git]
--static enable static build [$static]
--mandir=PATH install man pages in PATH
--datadir=PATH install firmware in PATH$confsuffix
--docdir=PATH install documentation in PATH$confsuffix
--bindir=PATH install binaries in PATH
--libdir=PATH install libraries in PATH
--libexecdir=PATH install helper binaries in PATH
--sysconfdir=PATH install config in PATH$confsuffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--firmwarepath=PATH search PATH for firmware files
--with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
--with-pkgversion=VERS use specified string as sub-version of the package
--enable-debug enable common debug build options
--enable-sanitizers enable default sanitizers
--disable-strip disable stripping binaries
--disable-werror disable compilation abort on warning
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
--disable-stack-protector disable compiler-provided stack protection
--audio-drv-list=LIST set audio drivers list:
Available drivers: $audio_possible_drivers
--block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
--block-drv-rw-whitelist=L
set block driver read-write whitelist
(affects only QEMU, not qemu-img)
--block-drv-ro-whitelist=L
set block driver read-only whitelist
(affects only QEMU, not qemu-img)
--enable-trace-backends=B Set trace backend
Available backends: $trace_backend_list
--with-trace-file=NAME Full PATH,NAME of file to store traces
Default:trace-<pid>
--disable-slirp disable SLIRP userspace network connectivity
--enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
--enable-malloc-trim enable libc malloc_trim() for memory optimization
--oss-lib path to OSS library
--cpu=CPU Build for host CPU [$cpu]
--with-coroutine=BACKEND coroutine backend. Supported options:
ucontext, sigaltstack, windows
--enable-gcov enable test coverage analysis with gcov
--gcov=GCOV use specified gcov [$gcov_tool]
--disable-blobs disable installing provided firmware blobs
--with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
--with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
--tls-priority default TLS protocol/cipher priority string
--enable-gprof QEMU profiling with gprof
--enable-profiler profiler support
--enable-debug-stack-usage
track the maximum stack usage of stacks created by qemu_alloc_stack
--enable-plugins
enable plugins via shared library loading
--disable-containers don't use containers for cross-building
--gdb=GDB-path gdb to use for gdbstub tests [$gdb_bin]
Optional features, enabled with --enable-FEATURE and
disabled with --disable-FEATURE, default is enabled if available:
system all system emulation targets
user supported user emulation targets
linux-user all linux usermode emulation targets
bsd-user all BSD usermode emulation targets
docs build documentation
guest-agent build the QEMU Guest Agent
guest-agent-msi build guest agent Windows MSI installation package
pie Position Independent Executables
modules modules support (non-Windows)
module-upgrades try to load modules from alternate paths for upgrades
debug-tcg TCG debugging (default is disabled)
debug-info debugging information
sparse sparse checker
gnutls GNUTLS cryptography support
nettle nettle cryptography support
gcrypt libgcrypt cryptography support
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
auth-pam PAM access control
sdl SDL UI
sdl-image SDL Image support for icons
gtk gtk UI
vte vte support for the gtk UI
curses curses UI
iconv font glyph conversion support
vnc VNC UI support
vnc-sasl SASL encryption for VNC server
vnc-jpeg JPEG lossy compression for VNC server
vnc-png PNG compression for VNC server
cocoa Cocoa UI (Mac OS X only)
virtfs VirtFS
mpath Multipath persistent reservation passthrough
xen xen backend driver support
xen-pci-passthrough PCI passthrough support for Xen
brlapi BrlAPI (Braile)
curl curl connectivity
membarrier membarrier system call (for Linux 4.14+ or Windows)
fdt fdt device tree
kvm KVM acceleration support
hax HAX acceleration support
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
hvf Hypervisor.framework acceleration support
whpx Windows Hypervisor Platform acceleration support
rdma Enable RDMA-based migration
pvrdma Enable PVRDMA support
vde support for vde network
netmap support for netmap network
linux-aio Linux AIO support
linux-io-uring Linux io_uring support
cap-ng libcap-ng support
attr attr and xattr support
vhost-net vhost-net kernel acceleration support
vhost-vsock virtio sockets device support
vhost-scsi vhost-scsi kernel target support
vhost-crypto vhost-user-crypto backend support
vhost-kernel vhost kernel backend support
vhost-user vhost-user backend support
spice spice
rbd rados block device (rbd)
libiscsi iscsi support
libnfs nfs support
smartcard smartcard support (libcacard)
libusb libusb (for usb passthrough)
live-block-migration Block migration in the main migration stream
usb-redir usb network redirection support
lzo support of lzo compression library
snappy support of snappy compression library
bzip2 support of bzip2 compression library
(for reading bzip2-compressed dmg images)
lzfse support of lzfse compression library
(for reading lzfse-compressed dmg images)
zstd support for zstd compression library
(for migration compression and qcow2 cluster compression)
seccomp seccomp support
coroutine-pool coroutine freelist (better performance)
glusterfs GlusterFS backend
tpm TPM support
libssh ssh block device support
numa libnuma support
libxml2 for Parallels image format
tcmalloc tcmalloc support
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
jemalloc jemalloc support
avx2 AVX2 optimization support
avx512f AVX512F optimization support
replication replication support
opengl opengl support
virglrenderer virgl rendering support
xfsctl xfsctl support
qom-cast-debug cast debugging support
tools build qemu-io, qemu-nbd and qemu-img tools
vxhs Veritas HyperScale vDisk backend support
bochs bochs image format support
cloop cloop image format support
dmg dmg image format support
qcow1 qcow v1 image format support
vdi vdi image format support
vvfat vvfat image format support
qed qed image format support
parallels parallels image format support
sheepdog sheepdog block driver support
crypto-afalg Linux AF_ALG crypto backend driver
capstone capstone disassembler support
debug-mutex mutex debugging support
libpmem libpmem support
xkbcommon xkbcommon support
NOTE: The object files are built at the place where configure is launched
EOF
exit 0
fi
# Remove old dependency files to make sure that they get properly regenerated
rm -f */config-devices.mak.d
# Remove syscall_nr.h to be sure they will be regenerated in the build
# directory, not in the source directory
for arch in alpha hppa m68k xtensa sh4 microblaze arm ppc s390x sparc sparc64 \
i386 x86_64 mips mips64 ; do
# remove the file if it has been generated in the source directory
rm -f "${source_path}/linux-user/${arch}/syscall_nr.h"
# remove the dependency files
for target in ${arch}*-linux-user ; do
test -d "${target}" && find "${target}" -type f -name "*.d" \
-exec grep -q "${source_path}/linux-user/${arch}/syscall_nr.h" {} \; \
-print | while read file ; do rm "${file}" "${file%.d}.o" ; done
done
done
if test -z "$python"
then
error_exit "Python not found. Use --python=/path/to/python"
fi
# Note that if the Python conditional here evaluates True we will exit
# with status 1 which is a shell 'false' value.
if ! $python -c 'import sys; sys.exit(sys.version_info < (3,5))'; then
error_exit "Cannot use '$python', Python >= 3.5 is required." \
"Use --python=/path/to/python to specify a supported Python."
fi
# Preserve python version since some functionality is dependent on it
python_version=$($python -c 'import sys; print("%d.%d.%d" % (sys.version_info[0], sys.version_info[1], sys.version_info[2]))' 2>/dev/null)
# Suppress writing compiled files
python="$python -B"
# Check that the C compiler works. Doing this here before testing
# the host CPU ensures that we had a valid CC to autodetect the
# $cpu var (and we should bail right here if that's not the case).
# It also allows the help message to be printed without a CC.
write_c_skeleton;
if compile_object ; then
: C compiler works ok
else
error_exit "\"$cc\" either does not exist or does not work"
fi
if ! compile_prog ; then
error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
fi
# Now we have handled --enable-tcg-interpreter and know we're not just
# printing the help message, bail out if the host CPU isn't supported.
if test "$ARCH" = "unknown"; then
if test "$tcg_interpreter" = "yes" ; then
echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
else
error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
fi
fi
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
# Consult white-list to determine whether to enable werror
# by default. Only enable by default for git builds
if test -z "$werror" ; then
if test -e "$source_path/.git" && \
{ test "$linux" = "yes" || test "$mingw32" = "yes"; }; then
configure: Make C++ test work with --enable-werror gcc's C++ compiler complains about being passed some -W options which make sense for C but not for C++. This means we mustn't try a C++ compile with QEMU_CFLAGS, but only with a filtered version that removes the offending options. This filtering was already being done for uses of C++ in the build itself, but was omitted for the "does C++ work?" configure test. This only showed up when doing builds which explicitly enabled -Werror with --enable-werror, because the "do the compilers work" tests were mistakenly placed above the "default werror based on whether compiling from git" code. Another error in this category is that clang warns if you ask it to compile C++ code from a file named "foo.c". Further, because we were running do_cc in a subshell in the condition part of an "if", the error_exit inside do_compiler wouldn't terminate configure and we would plunge on regardless. Fix this complex of errors: 1. Move the default-werror code up so that there are no invocations of compile_object and friends between it and the point where we set $werror explicitly based on the --enable-werror command line option. 2. Provide a mechanism for filtering QEMU_CFLAGS to create QEMU_CXXFLAGS, and use it for the test we run here. 3. Provide a do_cxx function to run a test with the C++ compiler rather than doing cute tricks with subshells and do_cc. 4. Use a new temporary file TMPCXX for the C++ program fragment. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1393352869-22257-1-git-send-email-peter.maydell@linaro.org Tested-by: Andreas Färber <afaerber@suse.de>
2014-02-25 19:27:49 +01:00
werror="yes"
else
werror="no"
fi
fi
if test "$bogus_os" = "yes"; then
# Now that we know that we're not printing the help and that
# the compiler works (so the results of the check_defines we used
# to identify the OS are reliable), if we didn't recognize the
# host OS we should stop now.
error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')"
fi
# Check whether the compiler matches our minimum requirements:
cat > $TMPC << EOF
#if defined(__clang_major__) && defined(__clang_minor__)
# ifdef __apple_build_version__
# if __clang_major__ < 5 || (__clang_major__ == 5 && __clang_minor__ < 1)
# error You need at least XCode Clang v5.1 to compile QEMU
# endif
# else
# if __clang_major__ < 3 || (__clang_major__ == 3 && __clang_minor__ < 4)
# error You need at least Clang v3.4 to compile QEMU
# endif
# endif
#elif defined(__GNUC__) && defined(__GNUC_MINOR__)
# if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 8)
# error You need at least GCC v4.8 to compile QEMU
# endif
#else
# error You either need GCC or Clang to compiler QEMU
#endif
int main (void) { return 0; }
EOF
if ! compile_prog "" "" ; then
error_exit "You need at least GCC v4.8 or Clang v3.4 (or XCode Clang v5.1)"
fi
gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
gcc_flags="-Wno-missing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
gcc_flags="-Wendif-labels -Wno-shift-negative-value $gcc_flags"
gcc_flags="-Wno-initializer-overrides -Wexpansion-to-defined $gcc_flags"
gcc_flags="-Wno-string-plus-int -Wno-typedef-redefinition $gcc_flags"
# Note that we do not add -Werror to gcc_flags here, because that would
# enable it for all configure tests. If a configure test failed due
# to -Werror this would just silently disable some features,
# so it's too error prone.
cc_has_warning_flag() {
write_c_skeleton;
# Use the positive sense of the flag when testing for -Wno-wombat
# support (gcc will happily accept the -Wno- form of unknown
# warning options).
optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
compile_prog "-Werror $optflag" ""
}
for flag in $gcc_flags; do
if cc_has_warning_flag $flag ; then
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
fi
done
if test "$stack_protector" != "no"; then
cat > $TMPC << EOF
int main(int argc, char *argv[])
{
char arr[64], *p = arr, *c = argv[0];
while (*c) {
*p++ = *c++;
}
return 0;
}
EOF
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
gcc_flags="-fstack-protector-strong -fstack-protector-all"
sp_on=0
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
for flag in $gcc_flags; do
# We need to check both a compile and a link, since some compiler
# setups fail only on a .c->.o compile and some only at link time
if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
compile_prog "-Werror $flag" ""; then
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
QEMU_CFLAGS="$QEMU_CFLAGS $flag"
QEMU_LDFLAGS="$QEMU_LDFLAGS $flag"
sp_on=1
configure: add option to disable -fstack-protector flags The -fstack-protector flag family is useful for ensuring safety and for debugging, but has a performance impact. Here are some boot time comparisons of the various versions of -fstack-protector using qemu-system-arm on an x86_64 host: # -fstack-protector-all Startup finished in 1.810s (kernel) + 12.331s (initrd) + 49.016s (userspace) = 1min 3.159s Startup finished in 1.801s (kernel) + 12.287s (initrd) + 47.925s (userspace) = 1min 2.013s Startup finished in 1.812s (kernel) + 12.302s (initrd) + 47.995s (userspace) = 1min 2.111s # -fstack-protector-strong Startup finished in 1.744s (kernel) + 11.223s (initrd) + 44.688s (userspace) = 57.657s Startup finished in 1.721s (kernel) + 11.222s (initrd) + 44.194s (userspace) = 57.138s Startup finished in 1.693s (kernel) + 11.250s (initrd) + 44.426s (userspace) = 57.370s # -fstack-protector Startup finished in 1.705s (kernel) + 11.409s (initrd) + 43.563s (userspace) = 56.677s Startup finished in 1.877s (kernel) + 11.137s (initrd) + 43.719s (userspace) = 56.734s Startup finished in 1.708s (kernel) + 11.141s (initrd) + 43.628s (userspace) = 56.478s # no stack protector Startup finished in 1.743s (kernel) + 11.190s (initrd) + 43.709s (userspace) = 56.643s Startup finished in 1.763s (kernel) + 11.216s (initrd) + 43.767s (userspace) = 56.747s Startup finished in 1.711s (kernel) + 11.283s (initrd) + 43.878s (userspace) = 56.873s This patch introduces a configure option to disable the stack protector entirely, and conditional stack protector flag selection (in order, based on availability): -fstack-protector-strong, -fstack-protector-all, no stack protector. Signed-off-by: Steven Noonan <snoonan@amazon.com> Cc: Anthony Liguori <aliguori@amazon.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> [Prefer -fstack-protector-all to -fstack-protector, suggested by Laurent Desnogues. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-28 17:19:02 +01:00
break
fi
done
if test "$stack_protector" = yes; then
if test $sp_on = 0; then
error_exit "Stack protector not supported"
fi
fi
fi
# Disable -Wmissing-braces on older compilers that warn even for
# the "universal" C zero initializer {0}.
cat > $TMPC << EOF
struct {
int a[2];
} x = {0};
EOF
if compile_object "-Werror" "" ; then
:
else
QEMU_CFLAGS="$QEMU_CFLAGS -Wno-missing-braces"
fi
# Our module code doesn't support Windows
if test "$modules" = "yes" && test "$mingw32" = "yes" ; then
error_exit "Modules are not available for Windows"
fi
# module_upgrades is only reasonable if modules are enabled
if test "$modules" = "no" && test "$module_upgrades" = "yes" ; then
error_exit "Can't enable module-upgrades as Modules are not enabled"
fi
# Static linking is not possible with modules or PIE
if test "$static" = "yes" ; then
if test "$modules" = "yes" ; then
error_exit "static and modules are mutually incompatible"
fi
fi
# Unconditional check for compiler __thread support
cat > $TMPC << EOF
static __thread int tls_var;
int main(void) { return tls_var; }
EOF
if ! compile_prog "-Werror" "" ; then
error_exit "Your compiler does not support the __thread specifier for " \
"Thread-Local Storage (TLS). Please upgrade to a version that does."
fi
cat > $TMPC << EOF
#ifdef __linux__
# define THREAD __thread
#else
# define THREAD
#endif
static THREAD int tls_var;
int main(void) { return tls_var; }
EOF
# Check we support --no-pie first; we will need this for building ROMs.
if compile_prog "-Werror -fno-pie" "-no-pie"; then
CFLAGS_NOPIE="-fno-pie"
LDFLAGS_NOPIE="-no-pie"
fi
if test "$static" = "yes"; then
if test "$pie" != "no" && compile_prog "-Werror -fPIE -DPIE" "-static-pie"; then
QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS"
QEMU_LDFLAGS="-static-pie $QEMU_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "-static-pie not available due to missing toolchain support"
else
QEMU_LDFLAGS="-static $QEMU_LDFLAGS"
pie="no"
fi
elif test "$pie" = "no"; then
QEMU_CFLAGS="$CFLAGS_NOPIE $QEMU_CFLAGS"
QEMU_LDFLAGS="$LDFLAGS_NOPIE $QEMU_LDFLAGS"
elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then
QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS"
QEMU_LDFLAGS="-pie $QEMU_LDFLAGS"
pie="yes"
elif test "$pie" = "yes"; then
error_exit "PIE not available due to missing toolchain support"
else
echo "Disabling PIE due to missing toolchain support"
pie="no"
fi
# Detect support for PT_GNU_RELRO + DT_BIND_NOW.
# The combination is known as "full relro", because .got.plt is read-only too.
if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
QEMU_LDFLAGS="-Wl,-z,relro -Wl,-z,now $QEMU_LDFLAGS"
fi
##########################################
# __sync_fetch_and_and requires at least -march=i486. Many toolchains
# use i686 as default anyway, but for those that don't, an explicit
# specification is necessary
if test "$cpu" = "i386"; then
cat > $TMPC << EOF
static int sfaa(int *ptr)
{
return __sync_fetch_and_and(ptr, 0);
}
int main(void)
{
int val = 42;
val = __sync_val_compare_and_swap(&val, 0, 1);
sfaa(&val);
return val;
}
EOF
if ! compile_prog "" "" ; then
QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
fi
fi
#########################################
# Solaris specific configure tool chain decisions
if test "$solaris" = "yes" ; then
if has $install; then
:
else
error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \
"install fileutils from www.blastwave.org using pkg-get -i fileutils" \
"to get ginstall which is used by default (which lives in /opt/csw/bin)"
fi
if test "$(path_of $install)" = "/usr/sbin/install" ; then
error_exit "Solaris /usr/sbin/install is not an appropriate install program." \
"try ginstall from the GNU fileutils available from www.blastwave.org" \
"using pkg-get -i fileutils, or use --install=/usr/ucb/install"
fi
if has ar; then
:
else
if test -f /usr/ccs/bin/ar ; then
error_exit "No path includes ar" \
"Add /usr/ccs/bin to your path and rerun configure"
fi
error_exit "No path includes ar"
fi
fi
if test -z "${target_list+xxx}" ; then
for target in $default_target_list; do
supported_target $target 2>/dev/null && \
target_list="$target_list $target"
done
target_list="${target_list# }"
else
target_list=$(echo "$target_list" | sed -e 's/,/ /g')
for target in $target_list; do
# Check that we recognised the target name; this allows a more
# friendly error message than if we let it fall through.
case " $default_target_list " in
*" $target "*)
;;
*)
error_exit "Unknown target name '$target'"
;;
esac
supported_target $target || exit 1
done
fi
# see if system emulation was really requested
case " $target_list " in
*"-softmmu "*) softmmu=yes
;;
*) softmmu=no
;;
esac
for target in $target_list; do
case "$target" in
arm-softmmu | aarch64-softmmu | i386-softmmu | x86_64-softmmu)
edk2_blobs="yes"
;;
esac
done
# The EDK2 binaries are compressed with bzip2
if test "$edk2_blobs" = "yes" && ! has bzip2; then
error_exit "The bzip2 program is required for building QEMU"
fi
feature_not_found() {
feature=$1
remedy=$2
error_exit "User requested feature $feature" \
"configure was not able to find it." \
"$remedy"
}
# ---
# big/little endian test
cat > $TMPC << EOF
short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
extern int foo(short *, short *);
int main(int argc, char *argv[]) {
return foo(big_endian, little_endian);
}
EOF
if compile_object ; then
if strings -a $TMPO | grep -q BiGeNdIaN ; then
bigendian="yes"
elif strings -a $TMPO | grep -q LiTtLeEnDiAn ; then
bigendian="no"
else
echo big/little test failed
fi
else
echo big/little test failed
fi
##########################################
# system tools
if test -z "$want_tools"; then
if test "$softmmu" = "no"; then
want_tools=no
else
want_tools=yes
fi
fi
##########################################
# cocoa implies not SDL or GTK
# (the cocoa UI code currently assumes it is always the active UI
# and doesn't interact well with other UI frontend code)
if test "$cocoa" = "yes"; then
if test "$sdl" = "yes"; then
error_exit "Cocoa and SDL UIs cannot both be enabled at once"
fi
if test "$gtk" = "yes"; then
error_exit "Cocoa and GTK UIs cannot both be enabled at once"
fi
gtk=no
sdl=no
fi
# Some versions of Mac OS X incorrectly define SIZE_MAX
cat > $TMPC << EOF
#include <stdint.h>
#include <stdio.h>
int main(int argc, char *argv[]) {
return printf("%zu", SIZE_MAX);
}
EOF
have_broken_size_max=no
if ! compile_object -Werror ; then
have_broken_size_max=yes
fi
##########################################
# L2TPV3 probe
cat > $TMPC <<EOF
#include <sys/socket.h>
#include <linux/ip.h>
int main(void) { return sizeof(struct mmsghdr); }
EOF
if compile_prog "" "" ; then
l2tpv3=yes
else
l2tpv3=no
fi
#########################################
# vhost interdependencies and host support
# vhost backends
test "$vhost_user" = "" && vhost_user=yes
if test "$vhost_user" = "yes" && test "$mingw32" = "yes"; then
error_exit "vhost-user isn't available on win32"
fi
test "$vhost_kernel" = "" && vhost_kernel=$linux
if test "$vhost_kernel" = "yes" && test "$linux" != "yes"; then
error_exit "vhost-kernel is only available on Linux"
fi
# vhost-kernel devices
test "$vhost_scsi" = "" && vhost_scsi=$vhost_kernel
if test "$vhost_scsi" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-scsi requires --enable-vhost-kernel"
fi
test "$vhost_vsock" = "" && vhost_vsock=$vhost_kernel
if test "$vhost_vsock" = "yes" && test "$vhost_kernel" != "yes"; then
error_exit "--enable-vhost-vsock requires --enable-vhost-kernel"
fi
# vhost-user backends
test "$vhost_net_user" = "" && vhost_net_user=$vhost_user
if test "$vhost_net_user" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-net-user requires --enable-vhost-user"
fi
test "$vhost_crypto" = "" && vhost_crypto=$vhost_user
if test "$vhost_crypto" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-crypto requires --enable-vhost-user"
fi
test "$vhost_user_fs" = "" && vhost_user_fs=$vhost_user
if test "$vhost_user_fs" = "yes" && test "$vhost_user" = "no"; then
error_exit "--enable-vhost-user-fs requires --enable-vhost-user"
fi
# OR the vhost-kernel and vhost-user values for simplicity
if test "$vhost_net" = ""; then
test "$vhost_net_user" = "yes" && vhost_net=yes
test "$vhost_kernel" = "yes" && vhost_net=yes
fi
oslib-win32: only provide localtime_r/gmtime_r if missing The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-22 16:13:26 +02:00
##########################################
# MinGW / Mingw-w64 localtime_r/gmtime_r check
if test "$mingw32" = "yes"; then
# Some versions of MinGW / Mingw-w64 lack localtime_r
# and gmtime_r entirely.
#
# Some versions of Mingw-w64 define a macro for
# localtime_r/gmtime_r.
#
# Some versions of Mingw-w64 will define functions
# for localtime_r/gmtime_r, but only if you have
# _POSIX_THREAD_SAFE_FUNCTIONS defined. For fun
# though, unistd.h and pthread.h both define
# that for you.
#
# So this #undef localtime_r and #include <unistd.h>
# are not in fact redundant.
cat > $TMPC << EOF
#include <unistd.h>
#include <time.h>
#undef localtime_r
int main(void) { localtime_r(NULL, NULL); return 0; }
EOF
if compile_prog "" "" ; then
localtime_r="yes"
else
localtime_r="no"
fi
fi
##########################################
# pkg-config probe
if ! has "$pkg_config_exe"; then
error_exit "pkg-config binary '$pkg_config_exe' not found"
fi
##########################################
# NPTL probe
if test "$linux_user" = "yes"; then
cat > $TMPC <<EOF
#include <sched.h>
#include <linux/futex.h>
int main(void) {
#if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
#error bork
#endif
return 0;
}
EOF
if ! compile_object ; then
feature_not_found "nptl" "Install glibc and linux kernel headers."
fi
fi
##########################################
# lzo check
if test "$lzo" != "no" ; then
cat > $TMPC << EOF
#include <lzo/lzo1x.h>
int main(void) { lzo_version(); return 0; }
EOF
if compile_prog "" "-llzo2" ; then
libs_softmmu="$libs_softmmu -llzo2"
lzo="yes"
else
if test "$lzo" = "yes"; then
feature_not_found "liblzo2" "Install liblzo2 devel"
fi
lzo="no"
fi
fi
##########################################
# snappy check
if test "$snappy" != "no" ; then
cat > $TMPC << EOF
#include <snappy-c.h>
int main(void) { snappy_max_compressed_length(4096); return 0; }
EOF
if compile_prog "" "-lsnappy" ; then
libs_softmmu="$libs_softmmu -lsnappy"
snappy="yes"
else
if test "$snappy" = "yes"; then
feature_not_found "libsnappy" "Install libsnappy devel"
fi
snappy="no"
fi
fi
##########################################
# bzip2 check
if test "$bzip2" != "no" ; then
cat > $TMPC << EOF
#include <bzlib.h>
int main(void) { BZ2_bzlibVersion(); return 0; }
EOF
if compile_prog "" "-lbz2" ; then
bzip2="yes"
else
if test "$bzip2" = "yes"; then
feature_not_found "libbzip2" "Install libbzip2 devel"
fi
bzip2="no"
fi
fi
##########################################
# lzfse check
if test "$lzfse" != "no" ; then
cat > $TMPC << EOF
#include <lzfse.h>
int main(void) { lzfse_decode_scratch_size(); return 0; }
EOF
if compile_prog "" "-llzfse" ; then
lzfse="yes"
else
if test "$lzfse" = "yes"; then
feature_not_found "lzfse" "Install lzfse devel"
fi
lzfse="no"
fi
fi
##########################################
# zstd check
if test "$zstd" != "no" ; then
libzstd_minver="1.4.0"
if $pkg_config --atleast-version=$libzstd_minver libzstd ; then
zstd_cflags="$($pkg_config --cflags libzstd)"
zstd_libs="$($pkg_config --libs libzstd)"
LIBS="$zstd_libs $LIBS"
QEMU_CFLAGS="$QEMU_CFLAGS $zstd_cflags"
zstd="yes"
else
if test "$zstd" = "yes" ; then
feature_not_found "libzstd" "Install libzstd devel"
fi
zstd="no"
fi
fi
##########################################
# libseccomp check
if test "$seccomp" != "no" ; then
libseccomp_minver="2.3.0"
if $pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
seccomp_cflags="$($pkg_config --cflags libseccomp)"
seccomp_libs="$($pkg_config --libs libseccomp)"
seccomp="yes"
else
if test "$seccomp" = "yes" ; then
feature_not_found "libseccomp" \
"Install libseccomp devel >= $libseccomp_minver"
fi
seccomp="no"
fi
fi
##########################################
# xen probe
if test "$xen" != "no" ; then
# Check whether Xen library path is specified via --extra-ldflags to avoid
# overriding this setting with pkg-config output. If not, try pkg-config
# to obtain all needed flags.
if ! echo $EXTRA_LDFLAGS | grep tools/libxc > /dev/null && \
$pkg_config --exists xencontrol ; then
xen_ctrl_version="$(printf '%d%02d%02d' \
$($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
xen=yes
xen_pc="xencontrol xenstore xenguest xenforeignmemory xengnttab"
xen_pc="$xen_pc xenevtchn xendevicemodel"
if $pkg_config --exists xentoolcore; then
xen_pc="$xen_pc xentoolcore"
fi
QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags $xen_pc)"
libs_softmmu="$($pkg_config --libs $xen_pc) $libs_softmmu"
else
xen_libs="-lxenstore -lxenctrl -lxenguest"
xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
# First we test whether Xen headers and libraries are available.
# If no, we are done and there is no Xen support.
# If yes, more tests are run to detect the Xen version.
# Xen (any)
cat > $TMPC <<EOF
#include <xenctrl.h>
int main(void) {
return 0;
}
EOF
if ! compile_prog "" "$xen_libs" ; then
# Xen not found
if test "$xen" = "yes" ; then
feature_not_found "xen" "Install xen devel"
fi
xen=no
# Xen unstable
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
#include <xenforeignmemory.h>
int main(void) {
xendevicemodel_handle *xd;
xenforeignmemory_handle *xfmem;
xd = xendevicemodel_open(0, 0);
xendevicemodel_pin_memory_cacheattr(xd, 0, 0, 0, 0);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map_resource(xfmem, 0, 0, 0, 0, 0, NULL, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41100
xen=yes
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenforeignmemory.h>
#include <xentoolcore.h>
int main(void) {
xenforeignmemory_handle *xfmem;
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map2(xfmem, 0, 0, 0, 0, 0, 0, 0);
xentoolcore_restrict_all(0);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
xen_ctrl_version=41000
xen=yes
elif
cat > $TMPC <<EOF &&
#undef XC_WANT_COMPAT_DEVICEMODEL_API
#define __XEN_TOOLS__
#include <xendevicemodel.h>
int main(void) {
xendevicemodel_handle *xd;
xd = xendevicemodel_open(0, 0);
xendevicemodel_close(xd);
return 0;
}
EOF
compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs"
then
xen_stable_libs="-lxendevicemodel $xen_stable_libs"
xen_ctrl_version=40900
xen=yes
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*
* Also, check if xengnttab_grant_copy_segment_t is defined and
* grant copy operation is implemented.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xengnttab_grant_copy_segment_t* seg = NULL;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_grant_copy(xg, 0, seg);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40800
xen=yes
elif
cat > $TMPC <<EOF &&
/*
* If we have stable libs the we don't want the libxc compat
* layers, regardless of what CFLAGS we may have been given.
*/
#undef XC_WANT_COMPAT_EVTCHN_API
#undef XC_WANT_COMPAT_GNTTAB_API
#undef XC_WANT_COMPAT_MAP_FOREIGN_API
#include <xenctrl.h>
#include <xenstore.h>
#include <xenevtchn.h>
#include <xengnttab.h>
#include <xenforeignmemory.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc = NULL;
xenforeignmemory_handle *xfmem;
xenevtchn_handle *xe;
xengnttab_handle *xg;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xfmem = xenforeignmemory_open(0, 0);
xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
xe = xenevtchn_open(0, 0);
xenevtchn_fd(xe);
xg = xengnttab_open(0, 0);
xengnttab_map_grant_ref(xg, 0, 0, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs $xen_stable_libs"
then
xen_ctrl_version=40701
xen=yes
# Xen 4.6
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40600
xen=yes
# Xen 4.5
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40500
xen=yes
elif
cat > $TMPC <<EOF &&
#include <xenctrl.h>
#include <xenstore.h>
#include <stdint.h>
#include <xen/hvm/hvm_info_table.h>
#if !defined(HVM_MAX_VCPUS)
# error HVM_MAX_VCPUS not defined
#endif
int main(void) {
xc_interface *xc;
xs_daemon_open();
xc = xc_interface_open(0, 0, 0);
xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
xc_gnttab_open(NULL, 0);
xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
return 0;
}
EOF
compile_prog "" "$xen_libs"
then
xen_ctrl_version=40200
xen=yes
else
if test "$xen" = "yes" ; then
feature_not_found "xen (unsupported version)" \
"Install a supported xen (xen 4.2 or newer)"
fi
xen=no
fi
if test "$xen" = yes; then
if test $xen_ctrl_version -ge 40701 ; then
libs_softmmu="$xen_stable_libs $libs_softmmu"
fi
libs_softmmu="$xen_libs $libs_softmmu"
fi
fi
fi
if test "$xen_pci_passthrough" != "no"; then
if test "$xen" = "yes" && test "$linux" = "yes"; then
xen_pci_passthrough=yes
else
if test "$xen_pci_passthrough" = "yes"; then
error_exit "User requested feature Xen PCI Passthrough" \
" but this feature requires /sys from Linux"
fi
xen_pci_passthrough=no
fi
fi
##########################################
# Windows Hypervisor Platform accelerator (WHPX) check
if test "$whpx" != "no" ; then
if check_include "WinHvPlatform.h" && check_include "WinHvEmulation.h"; then
whpx="yes"
else
if test "$whpx" = "yes"; then
feature_not_found "WinHvPlatform" "WinHvEmulation is not installed"
fi
whpx="no"
fi
fi
##########################################
# Sparse probe
if test "$sparse" != "no" ; then
if has cgcc; then
sparse=yes
else
if test "$sparse" = "yes" ; then
feature_not_found "sparse" "Install sparse binary"
fi
sparse=no
fi
fi
##########################################
# X11 probe
if $pkg_config --exists "x11"; then
have_x11=yes
x11_cflags=$($pkg_config --cflags x11)
x11_libs=$($pkg_config --libs x11)
fi
##########################################
# GTK probe
if test "$gtk" != "no"; then
gtkpackage="gtk+-3.0"
gtkx11package="gtk+-x11-3.0"
gtkversion="3.22.0"
if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
gtk_cflags=$($pkg_config --cflags $gtkpackage)
gtk_libs=$($pkg_config --libs $gtkpackage)
gtk_version=$($pkg_config --modversion $gtkpackage)
if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
need_x11=yes
gtk_cflags="$gtk_cflags $x11_cflags"
gtk_libs="$gtk_libs $x11_libs"
fi
gtk="yes"
elif test "$gtk" = "yes"; then
feature_not_found "gtk" "Install gtk3-devel"
else
gtk="no"
fi
fi
##########################################
# GNUTLS probe
if test "$gnutls" != "no"; then
pass="no"
if $pkg_config --exists "gnutls >= 3.1.18"; then
gnutls_cflags=$($pkg_config --cflags gnutls)
gnutls_libs=$($pkg_config --libs gnutls)
# Packaging for the static libraries is not always correct.
# At least ubuntu 18.04 ships only shared libraries.
write_c_skeleton
if compile_prog "" "$gnutls_libs" ; then
LIBS="$gnutls_libs $LIBS"
QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
pass="yes"
fi
fi
if test "$pass" = "no" && test "$gnutls" = "yes"; then
feature_not_found "gnutls" "Install gnutls devel >= 3.1.18"
else
gnutls="$pass"
fi
fi
# If user didn't give a --disable/enable-gcrypt flag,
# then mark as disabled if user requested nettle
# explicitly
if test -z "$gcrypt"
then
if test "$nettle" = "yes"
then
gcrypt="no"
fi
fi
# If user didn't give a --disable/enable-nettle flag,
# then mark as disabled if user requested gcrypt
# explicitly
if test -z "$nettle"
then
if test "$gcrypt" = "yes"
then
nettle="no"
fi
fi
has_libgcrypt() {
if ! has "libgcrypt-config"
then
return 1
fi
if test -n "$cross_prefix"
then
host=$(libgcrypt-config --host)
if test "$host-" != $cross_prefix
then
return 1
fi
fi
maj=`libgcrypt-config --version | awk -F . '{print $1}'`
min=`libgcrypt-config --version | awk -F . '{print $2}'`
if test $maj != 1 || test $min -lt 5
then
return 1
fi
return 0
}
if test "$nettle" != "no"; then
pass="no"
if $pkg_config --exists "nettle >= 2.7.1"; then
nettle_cflags=$($pkg_config --cflags nettle)
nettle_libs=$($pkg_config --libs nettle)
nettle_version=$($pkg_config --modversion nettle)
# Link test to make sure the given libraries work (e.g for static).
write_c_skeleton
if compile_prog "" "$nettle_libs" ; then
LIBS="$nettle_libs $LIBS"
QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
if test -z "$gcrypt"; then
gcrypt="no"
fi
pass="yes"
fi
fi
if test "$pass" = "yes"
then
cat > $TMPC << EOF
#include <nettle/xts.h>
int main(void) {
return 0;
}
EOF
if compile_prog "$nettle_cflags" "$nettle_libs" ; then
nettle_xts=yes
qemu_private_xts=no
fi
fi
if test "$pass" = "no" && test "$nettle" = "yes"; then
feature_not_found "nettle" "Install nettle devel >= 2.7.1"
else
nettle="$pass"
fi
fi
if test "$gcrypt" != "no"; then
pass="no"
if has_libgcrypt; then
gcrypt_cflags=$(libgcrypt-config --cflags)
gcrypt_libs=$(libgcrypt-config --libs)
# Debian has removed -lgpg-error from libgcrypt-config
# as it "spreads unnecessary dependencies" which in
# turn breaks static builds...
if test "$static" = "yes"
then
gcrypt_libs="$gcrypt_libs -lgpg-error"
fi
# Link test to make sure the given libraries work (e.g for static).
write_c_skeleton
if compile_prog "" "$gcrypt_libs" ; then
LIBS="$gcrypt_libs $LIBS"
QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
pass="yes"
fi
fi
if test "$pass" = "yes"; then
gcrypt="yes"
cat > $TMPC << EOF
#include <gcrypt.h>
int main(void) {
gcry_mac_hd_t handle;
gcry_mac_open(&handle, GCRY_MAC_HMAC_MD5,
GCRY_MAC_FLAG_SECURE, NULL);
return 0;
}
EOF
if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
gcrypt_hmac=yes
fi
cat > $TMPC << EOF
#include <gcrypt.h>
int main(void) {
gcry_cipher_hd_t handle;
gcry_cipher_open(&handle, GCRY_CIPHER_AES, GCRY_CIPHER_MODE_XTS, 0);
return 0;
}
EOF
if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
gcrypt_xts=yes
qemu_private_xts=no
fi
elif test "$gcrypt" = "yes"; then
feature_not_found "gcrypt" "Install gcrypt devel >= 1.5.0"
else
gcrypt="no"
fi
fi
if test "$gcrypt" = "yes" && test "$nettle" = "yes"
then
error_exit "Only one of gcrypt & nettle can be enabled"
fi
##########################################
# libtasn1 - only for the TLS creds/session test suite
tasn1=yes
tasn1_cflags=""
tasn1_libs=""
if $pkg_config --exists "libtasn1"; then
tasn1_cflags=$($pkg_config --cflags libtasn1)
tasn1_libs=$($pkg_config --libs libtasn1)
else
tasn1=no
fi
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
##########################################
# PAM probe
if test "$auth_pam" != "no"; then
cat > $TMPC <<EOF
#include <security/pam_appl.h>
#include <stdio.h>
int main(void) {
const char *service_name = "qemu";
const char *user = "frank";
const struct pam_conv pam_conv = { 0 };
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
pam_handle_t *pamh = NULL;
pam_start(service_name, user, &pam_conv, &pamh);
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
return 0;
}
EOF
if compile_prog "" "-lpam" ; then
auth_pam=yes
else
if test "$auth_pam" = "yes"; then
feature_not_found "PAM" "Install PAM development package"
else
auth_pam=no
fi
fi
fi
##########################################
# getifaddrs (for tests/test-io-channel-socket )
have_ifaddrs_h=yes
if ! check_include "ifaddrs.h" ; then
have_ifaddrs_h=no
fi
##########################################
# VTE probe
if test "$vte" != "no"; then
vteminversion="0.32.0"
if $pkg_config --exists "vte-2.91"; then
vtepackage="vte-2.91"
else
vtepackage="vte-2.90"
fi
if $pkg_config --exists "$vtepackage >= $vteminversion"; then
vte_cflags=$($pkg_config --cflags $vtepackage)
vte_libs=$($pkg_config --libs $vtepackage)
vteversion=$($pkg_config --modversion $vtepackage)
vte="yes"
elif test "$vte" = "yes"; then
feature_not_found "vte" "Install libvte-2.90/2.91 devel"
else
vte="no"
fi
fi
##########################################
# SDL probe
# Look for sdl configuration program (pkg-config or sdl2-config). Try
# sdl2-config even without cross prefix, and favour pkg-config over sdl2-config.
sdl_probe ()
{
if $pkg_config sdl2 --exists; then
sdlconfig="$pkg_config sdl2"
sdlversion=$($sdlconfig --modversion 2>/dev/null)
elif has "$sdl2_config"; then
sdlconfig="$sdl2_config"
sdlversion=$($sdlconfig --version)
else
if test "$sdl" = "yes" ; then
feature_not_found "sdl" "Install SDL2-devel"
fi
sdl=no
# no need to do the rest
return
fi
if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl2-config; then
echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2
fi
cat > $TMPC << EOF
#include <SDL.h>
#undef main /* We don't want SDL to override our main() */
int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
EOF
sdl_cflags=$($sdlconfig --cflags 2>/dev/null)
sdl_cflags="$sdl_cflags -Wno-undef" # workaround 2.0.8 bug
if test "$static" = "yes" ; then
if $pkg_config sdl2 --exists; then
sdl_libs=$($pkg_config sdl2 --static --libs 2>/dev/null)
else
sdl_libs=$($sdlconfig --static-libs 2>/dev/null)
fi
else
sdl_libs=$($sdlconfig --libs 2>/dev/null)
fi
if compile_prog "$sdl_cflags" "$sdl_libs" ; then
sdl=yes
# static link with sdl ? (note: sdl.pc's --static --libs is broken)
if test "$sdl" = "yes" && test "$static" = "yes" ; then
if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then
sdl_libs="$sdl_libs $(aalib-config --static-libs 2>/dev/null)"
sdl_cflags="$sdl_cflags $(aalib-config --cflags 2>/dev/null)"
fi
if compile_prog "$sdl_cflags" "$sdl_libs" ; then
:
else
sdl=no
fi
fi # static link
else # sdl not found
if test "$sdl" = "yes" ; then
feature_not_found "sdl" "Install SDL2 devel"
fi
sdl=no
fi # sdl compile test
}
sdl_image_probe ()
{
if test "$sdl_image" != "no" ; then
if $pkg_config SDL2_image --exists; then
if test "$static" = "yes"; then
sdl_image_libs=$($pkg_config SDL2_image --libs --static 2>/dev/null)
else
sdl_image_libs=$($pkg_config SDL2_image --libs 2>/dev/null)
fi
sdl_image_cflags=$($pkg_config SDL2_image --cflags 2>/dev/null)
sdl_image=yes
sdl_cflags="$sdl_cflags $sdl_image_cflags"
sdl_libs="$sdl_libs $sdl_image_libs"
else
if test "$sdl_image" = "yes" ; then
feature_not_found "sdl_image" "Install SDL Image devel"
else
sdl_image=no
fi
fi
fi
}
if test "$sdl" != "no" ; then
sdl_probe
fi
if test "$sdl" = "yes" ; then
sdl_image_probe
else
if test "$sdl_image" = "yes"; then
echo "warning: SDL Image requested, but SDL is not available, disabling"
fi
sdl_image=no
fi
if test "$sdl" = "yes" ; then
cat > $TMPC <<EOF
#include <SDL.h>
#if defined(SDL_VIDEO_DRIVER_X11)
#include <X11/XKBlib.h>
#else
#error No x11 support
#endif
int main(void) { return 0; }
EOF
if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
need_x11=yes
sdl_cflags="$sdl_cflags $x11_cflags"
sdl_libs="$sdl_libs $x11_libs"
fi
fi
##########################################
# RDMA needs OpenFabrics libraries
if test "$rdma" != "no" ; then
cat > $TMPC <<EOF
#include <rdma/rdma_cma.h>
int main(void) { return 0; }
EOF
rdma_libs="-lrdmacm -libverbs -libumad"
if compile_prog "" "$rdma_libs" ; then
rdma="yes"
libs_softmmu="$libs_softmmu $rdma_libs"
else
if test "$rdma" = "yes" ; then
error_exit \
" OpenFabrics librdmacm/libibverbs/libibumad not present." \
" Your options:" \
" (1) Fast: Install infiniband packages (devel) from your distro." \
" (2) Cleanest: Install libraries from www.openfabrics.org" \
" (3) Also: Install softiwarp if you don't have RDMA hardware"
fi
rdma="no"
fi
fi
##########################################
# PVRDMA detection
cat > $TMPC <<EOF &&
#include <sys/mman.h>
int
main(void)
{
char buf = 0;
void *addr = &buf;
addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED);
return 0;
}
EOF
if test "$rdma" = "yes" ; then
case "$pvrdma" in
"")
if compile_prog "" ""; then
pvrdma="yes"
else
pvrdma="no"
fi
;;
"yes")
if ! compile_prog "" ""; then
error_exit "PVRDMA is not supported since mremap is not implemented"
fi
pvrdma="yes"
;;
"no")
pvrdma="no"
;;
esac
else
if test "$pvrdma" = "yes" ; then
error_exit "PVRDMA requires rdma suppport"
fi
pvrdma="no"
fi
# Let's see if enhanced reg_mr is supported
if test "$pvrdma" = "yes" ; then
cat > $TMPC <<EOF &&
#include <infiniband/verbs.h>
int
main(void)
{
struct ibv_mr *mr;
struct ibv_pd *pd = NULL;
size_t length = 10;
uint64_t iova = 0;
int access = 0;
void *addr = NULL;
mr = ibv_reg_mr_iova(pd, addr, length, iova, access);
ibv_dereg_mr(mr);
return 0;
}
EOF
if ! compile_prog "" "-libverbs"; then
QEMU_CFLAGS="$QEMU_CFLAGS -DLEGACY_RDMA_REG_MR"
fi
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
##########################################
# VNC SASL detection
if test "$vnc" = "yes" && test "$vnc_sasl" != "no" ; then
cat > $TMPC <<EOF
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
#include <sasl/sasl.h>
#include <stdio.h>
int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
EOF
# Assuming Cyrus-SASL installed in /usr prefix
# QEMU defines struct iovec in "qemu/osdep.h",
# we don't want libsasl to redefine it in <sasl/sasl.h>.
vnc_sasl_cflags="-DSTRUCT_IOVEC_DEFINED"
vnc_sasl_libs="-lsasl2"
if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
vnc_sasl=yes
libs_softmmu="$vnc_sasl_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_sasl_cflags"
else
if test "$vnc_sasl" = "yes" ; then
feature_not_found "vnc-sasl" "Install Cyrus SASL devel"
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
fi
vnc_sasl=no
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
fi
##########################################
# VNC JPEG detection
if test "$vnc" = "yes" && test "$vnc_jpeg" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <jpeglib.h>
int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
EOF
vnc_jpeg_cflags=""
vnc_jpeg_libs="-ljpeg"
if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
vnc_jpeg=yes
libs_softmmu="$vnc_jpeg_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_jpeg_cflags"
else
if test "$vnc_jpeg" = "yes" ; then
feature_not_found "vnc-jpeg" "Install libjpeg-turbo devel"
fi
vnc_jpeg=no
fi
fi
##########################################
# VNC PNG detection
if test "$vnc" = "yes" && test "$vnc_png" != "no" ; then
cat > $TMPC <<EOF
//#include <stdio.h>
#include <png.h>
#include <stddef.h>
int main(void) {
png_structp png_ptr;
png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
return png_ptr != 0;
}
EOF
if $pkg_config libpng --exists; then
vnc_png_cflags=$($pkg_config libpng --cflags)
vnc_png_libs=$($pkg_config libpng --libs)
else
vnc_png_cflags=""
vnc_png_libs="-lpng"
fi
if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then
vnc_png=yes
libs_softmmu="$vnc_png_libs $libs_softmmu"
QEMU_CFLAGS="$QEMU_CFLAGS $vnc_png_cflags"
else
if test "$vnc_png" = "yes" ; then
feature_not_found "vnc-png" "Install libpng devel"
fi
vnc_png=no
fi
fi
##########################################
# xkbcommon probe
if test "$xkbcommon" != "no" ; then
if $pkg_config xkbcommon --exists; then
xkbcommon_cflags=$($pkg_config xkbcommon --cflags)
xkbcommon_libs=$($pkg_config xkbcommon --libs)
xkbcommon=yes
else
if test "$xkbcommon" = "yes" ; then
feature_not_found "xkbcommon" "Install libxkbcommon-devel"
fi
xkbcommon=no
fi
fi
Support ACLs for controlling VNC access ("Daniel P. Berrange") This patch introduces a generic internal API for access control lists to be used by network servers in QEMU. It adds support for checking these ACL in the VNC server, in two places. The first ACL is for the SASL authentication mechanism, checking the SASL username. This ACL is called 'vnc.username'. The second is for the TLS authentication mechanism, when x509 client certificates are turned on, checking against the Distinguished Name of the client. This ACL is called 'vnc.x509dname' The internal API provides for an ACL with the following characteristics - A unique name, eg vnc.username, and vnc.x509dname. - A default policy, allow or deny - An ordered series of match rules, with allow or deny policy If none of the match rules apply, then the default policy is used. There is a monitor API to manipulate the ACLs, which I'll describe via examples (qemu) acl show vnc.username policy: allow (qemu) acl policy vnc.username denya acl: policy set to 'deny' (qemu) acl allow vnc.username fred acl: added rule at position 1 (qemu) acl allow vnc.username bob acl: added rule at position 2 (qemu) acl allow vnc.username joe 1 acl: added rule at position 1 (qemu) acl show vnc.username policy: deny 0: allow fred 1: allow joe 2: allow bob (qemu) acl show vnc.x509dname policy: allow (qemu) acl policy vnc.x509dname deny acl: policy set to 'deny' (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=London,CN=* acl: added rule at position 1 (qemu) acl allow vnc.x509dname C=GB,O=ACME,L=Boston,CN=bob acl: added rule at position 2 (qemu) acl show vnc.x509dname policy: deny 0: allow C=GB,O=ACME,L=London,CN=* 1: allow C=GB,O=ACME,L=Boston,CN=bob By default the VNC server will not use any ACLs, allowing access to the server if the user successfully authenticates. To enable use of ACLs to restrict user access, the ',acl' flag should be given when starting QEMU. The initial ACL activated will be a 'deny all' policy and should be customized using monitor commands. eg enable SASL auth and ACLs qemu .... -vnc localhost:1,sasl,acl The next patch will provide a way to load a pre-defined ACL when starting up Makefile | 6 + b/acl.c | 185 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ b/acl.h | 74 ++++++++++++++++++++++ configure | 18 +++++ monitor.c | 95 ++++++++++++++++++++++++++++ qemu-doc.texi | 49 ++++++++++++++ vnc-auth-sasl.c | 16 +++- vnc-auth-sasl.h | 7 ++ vnc-tls.c | 19 +++++ vnc-tls.h | 3 vnc.c | 21 ++++++ vnc.h | 3 12 files changed, 491 insertions(+), 5 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6726 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:37 +01:00
##########################################
# xfsctl() probe, used for file-posix.c
if test "$xfs" != "no" ; then
cat > $TMPC << EOF
#include <stddef.h> /* NULL */
#include <xfs/xfs.h>
int main(void)
{
xfsctl(NULL, 0, 0, NULL);
return 0;
}
EOF
if compile_prog "" "" ; then
xfs="yes"
else
if test "$xfs" = "yes" ; then
feature_not_found "xfs" "Instal xfsprogs/xfslibs devel"
fi
xfs=no
fi
fi
##########################################
# vde libraries probe
if test "$vde" != "no" ; then
vde_libs="-lvdeplug"
cat > $TMPC << EOF
#include <libvdeplug.h>
int main(void)
{
struct vde_open_args a = {0, 0, 0};
char s[] = "";
vde_open(s, s, &a);
return 0;
}
EOF
if compile_prog "" "$vde_libs" ; then
vde=yes
else
if test "$vde" = "yes" ; then
feature_not_found "vde" "Install vde (Virtual Distributed Ethernet) devel"
fi
vde=no
fi
fi
##########################################
# netmap support probe
# Apart from looking for netmap headers, we make sure that the host API version
# supports the netmap backend (>=11). The upper bound (15) is meant to simulate
# a minor/major version number. Minor new features will be marked with values up
# to 15, and if something happens that requires a change to the backend we will
# move above 15, submit the backend fixes and modify this two bounds.
if test "$netmap" != "no" ; then
cat > $TMPC << EOF
#include <inttypes.h>
#include <net/if.h>
#include <net/netmap.h>
#include <net/netmap_user.h>
#if (NETMAP_API < 11) || (NETMAP_API > 15)
#error
#endif
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
netmap=yes
else
if test "$netmap" = "yes" ; then
feature_not_found "netmap"
fi
netmap=no
fi
fi
##########################################
# libcap-ng library probe
if test "$cap_ng" != "no" ; then
cap_libs="-lcap-ng"
cat > $TMPC << EOF
#include <cap-ng.h>
int main(void)
{
capng_capability_to_name(CAPNG_EFFECTIVE);
return 0;
}
EOF
if compile_prog "" "$cap_libs" ; then
cap_ng=yes
libs_tools="$cap_libs $libs_tools"
else
if test "$cap_ng" = "yes" ; then
feature_not_found "cap_ng" "Install libcap-ng devel"
fi
cap_ng=no
fi
fi
##########################################
# Sound support libraries probe
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
for drv in $audio_drv_list; do
case $drv in
alsa | try-alsa)
if $pkg_config alsa --exists; then
alsa_libs=$($pkg_config alsa --libs)
if test "$drv" = "try-alsa"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa/alsa/')
fi
else
if test "$drv" = "try-alsa"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-alsa//')
else
error_exit "$drv check failed" \
"Make sure to have the $drv libs and headers installed."
fi
fi
;;
pa | try-pa)
if $pkg_config libpulse --exists; then
pulse_libs=$($pkg_config libpulse --libs)
if test "$drv" = "try-pa"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa/pa/')
fi
else
if test "$drv" = "try-pa"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-pa//')
else
error_exit "$drv check failed" \
"Make sure to have the $drv libs and headers installed."
fi
fi
;;
sdl)
if test "$sdl" = "no"; then
error_exit "sdl not found or disabled, can not use sdl audio driver"
fi
;;
try-sdl)
if test "$sdl" = "no"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl//')
else
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-sdl/sdl/')
fi
;;
coreaudio)
coreaudio_libs="-framework CoreAudio"
;;
dsound)
dsound_libs="-lole32 -ldxguid"
audio_win_int="yes"
;;
oss)
oss_libs="$oss_lib"
;;
jack | try-jack)
if $pkg_config jack --exists; then
jack_libs=$($pkg_config jack --libs)
if test "$drv" = "try-jack"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-jack/jack/')
fi
else
if test "$drv" = "try-jack"; then
audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/try-jack//')
else
error_exit "$drv check failed" \
"Make sure to have the $drv libs and headers installed."
fi
fi
;;
*)
echo "$audio_possible_drivers" | grep -q "\<$drv\>" || {
error_exit "Unknown driver '$drv' selected" \
"Possible drivers are: $audio_possible_drivers"
}
;;
esac
done
##########################################
# BrlAPI probe
if test "$brlapi" != "no" ; then
brlapi_libs="-lbrlapi"
cat > $TMPC << EOF
#include <brlapi.h>
#include <stddef.h>
int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
EOF
if compile_prog "" "$brlapi_libs" ; then
brlapi=yes
else
if test "$brlapi" = "yes" ; then
feature_not_found "brlapi" "Install brlapi devel"
fi
brlapi=no
fi
fi
##########################################
# iconv probe
if test "$iconv" != "no" ; then
cat > $TMPC << EOF
#include <iconv.h>
int main(void) {
iconv_t conv = iconv_open("WCHAR_T", "UCS-2");
return conv != (iconv_t) -1;
}
EOF
iconv_prefix_list="/usr/local:/usr"
iconv_lib_list=":-liconv"
IFS=:
for iconv_prefix in $iconv_prefix_list; do
IFS=:
iconv_cflags="-I$iconv_prefix/include"
iconv_ldflags="-L$iconv_prefix/lib"
for iconv_link in $iconv_lib_list; do
unset IFS
iconv_lib="$iconv_ldflags $iconv_link"
echo "looking at iconv in '$iconv_cflags' '$iconv_lib'" >> config.log
if compile_prog "$iconv_cflags" "$iconv_lib" ; then
iconv_found=yes
break
fi
done
if test "$iconv_found" = yes ; then
break
fi
done
if test "$iconv_found" = "yes" ; then
iconv=yes
else
if test "$iconv" = "yes" ; then
feature_not_found "iconv" "Install iconv devel"
fi
iconv=no
fi
fi
##########################################
# curses probe
if test "$iconv" = "no" ; then
# curses will need iconv
curses=no
fi
if test "$curses" != "no" ; then
if test "$mingw32" = "yes" ; then
curses_inc_list="$($pkg_config --cflags ncurses 2>/dev/null):"
curses_lib_list="$($pkg_config --libs ncurses 2>/dev/null):-lpdcurses"
else
curses_inc_list="$($pkg_config --cflags ncursesw 2>/dev/null):-I/usr/include/ncursesw:"
curses_lib_list="$($pkg_config --libs ncursesw 2>/dev/null):-lncursesw:-lcursesw"
fi
curses_found=no
cat > $TMPC << EOF
#include <locale.h>
#include <curses.h>
#include <wchar.h>
#include <langinfo.h>
int main(void) {
const char *codeset;
wchar_t wch = L'w';
setlocale(LC_ALL, "");
resize_term(0, 0);
addwstr(L"wide chars\n");
addnwstr(&wch, 1);
add_wch(WACS_DEGREE);
codeset = nl_langinfo(CODESET);
return codeset != 0;
}
EOF
IFS=:
for curses_inc in $curses_inc_list; do
# Make sure we get the wide character prototypes
curses_inc="-DNCURSES_WIDECHAR $curses_inc"
IFS=:
for curses_lib in $curses_lib_list; do
unset IFS
if compile_prog "$curses_inc" "$curses_lib" ; then
curses_found=yes
break
fi
done
if test "$curses_found" = yes ; then
break
fi
done
unset IFS
if test "$curses_found" = "yes" ; then
curses=yes
else
if test "$curses" = "yes" ; then
feature_not_found "curses" "Install ncurses devel"
fi
curses=no
fi
fi
##########################################
# curl probe
if test "$curl" != "no" ; then
if $pkg_config libcurl --exists; then
curlconfig="$pkg_config libcurl"
else
curlconfig=curl-config
fi
cat > $TMPC << EOF
#include <curl/curl.h>
int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
EOF
curl_cflags=$($curlconfig --cflags 2>/dev/null)
curl_libs=$($curlconfig --libs 2>/dev/null)
if compile_prog "$curl_cflags" "$curl_libs" ; then
curl=yes
else
if test "$curl" = "yes" ; then
feature_not_found "curl" "Install libcurl devel"
fi
curl=no
fi
fi # test "$curl"
##########################################
# glib support probe
glib_req_ver=2.48
glib_modules=gthread-2.0
if test "$modules" = yes; then
glib_modules="$glib_modules gmodule-export-2.0"
fi
if test "$plugins" = yes; then
glib_modules="$glib_modules gmodule-2.0"
fi
# This workaround is required due to a bug in pkg-config file for glib as it
# doesn't define GLIB_STATIC_COMPILATION for pkg-config --static
if test "$static" = yes && test "$mingw32" = yes; then
QEMU_CFLAGS="-DGLIB_STATIC_COMPILATION $QEMU_CFLAGS"
fi
for i in $glib_modules; do
if $pkg_config --atleast-version=$glib_req_ver $i; then
glib_cflags=$($pkg_config --cflags $i)
glib_libs=$($pkg_config --libs $i)
QEMU_CFLAGS="$glib_cflags $QEMU_CFLAGS"
LIBS="$glib_libs $LIBS"
libs_qga="$glib_libs $libs_qga"
else
error_exit "glib-$glib_req_ver $i is required to compile QEMU"
fi
done
if $pkg_config --atleast-version=$glib_req_ver gio-2.0; then
gio=yes
gio_cflags=$($pkg_config --cflags gio-2.0)
gio_libs=$($pkg_config --libs gio-2.0)
gdbus_codegen=$($pkg_config --variable=gdbus_codegen gio-2.0)
if [ ! -x "$gdbus_codegen" ]; then
gdbus_codegen=
fi
else
gio=no
fi
if $pkg_config --atleast-version=$glib_req_ver gio-unix-2.0; then
gio_cflags="$gio_cflags $($pkg_config --cflags gio-unix-2.0)"
gio_libs="$gio_libs $($pkg_config --libs gio-unix-2.0)"
fi
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 10:00:45 +01:00
# Sanity check that the current size_t matches the
# size that glib thinks it should be. This catches
# problems on multi-arch where people try to build
# 32-bit QEMU while pointing at 64-bit glib headers
cat > $TMPC <<EOF
#include <glib.h>
#include <unistd.h>
#define QEMU_BUILD_BUG_ON(x) \
typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
int main(void) {
QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
return 0;
}
EOF
if ! compile_prog "$CFLAGS" "$LIBS" ; then
configure: sanity check the glib library that pkg-config finds Developers on 64-bit machines will often try to perform a 32-bit build of QEMU by running ./configure --extra-cflags="-m32" Unfortunately if PKG_CONFIG_LIBDIR is not set to point to the location of the 32-bit pkg-config files, then configure will silently pick up the 64-bit pkg-config files and still succeed. This causes a problem for glib because it means QEMU will be pulling in /usr/lib64/glib-2.0/include/glibconfig.h instead of /usr/lib/glib-2.0/include/glibconfig.h This causes problems because the 'gsize' type (defined as 'unsigned long') will no longer be fully compatible with the 'size_t' type (defined as 'unsigned int'). Although both are the same size, the compiler refuses to allow casts from 'unsigned long *' to 'unsigned int *' as they are different pointer types. This results in non-obvious compiler errors when building QEMU eg qga/commands-posix.c: In function ‘qmp_guest_set_user_password’: qga/commands-posix.c:1912:55: error: passing argument 2 of ‘g_base64_decode’ from incompatible pointer type [-Werror=incompatible-pointer-types] rawpasswddata = (char *)g_base64_decode(password, &rawpasswdlen); ^ In file included from /usr/include/glib-2.0/glib.h:35:0, from qga/commands-posix.c:14: /usr/include/glib-2.0/glib/gbase64.h:52:9: note: expected ‘gsize * {aka long unsigned int *}’ but argument is of type ‘size_t * {aka unsigned int *}’ guchar *g_base64_decode (const gchar *text, ^ cc1: all warnings being treated as errors To detect this problem, add a check to configure that verifies that GLIB_SIZEOF_SIZE_T matches sizeof(size_t). If this fails print a warning suggesting that the dev probably needs to set PKG_CONFIG_LIBDIR. On Fedora x86_64 it passes with any of: # ./configure # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m64" And fails with a mis-match # PKG_CONFIG_LIBDIR=/usr/lib64/pkgconfig ./configure --extra-cflags="-m32" # PKG_CONFIG_LIBDIR=/usr/lib/pkgconfig ./configure --extra-cflags="-m64" ERROR: sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T. You probably need to set PKG_CONFIG_LIBDIR to point to the right pkg-config files for your build target Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1453885245-15562-1-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-27 10:00:45 +01:00
error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
"You probably need to set PKG_CONFIG_LIBDIR"\
"to point to the right pkg-config files for your"\
"build target"
fi
# Silence clang 3.5.0 warnings about glib attribute __alloc_size__ usage
cat > $TMPC << EOF
#include <glib.h>
int main(void) { return 0; }
EOF
if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
if cc_has_warning_flag "-Wno-unknown-attributes"; then
glib_cflags="-Wno-unknown-attributes $glib_cflags"
CFLAGS="-Wno-unknown-attributes $CFLAGS"
fi
fi
# Silence clang warnings triggered by glib < 2.57.2
cat > $TMPC << EOF
#include <glib.h>
typedef struct Foo {
int i;
} Foo;
static void foo_free(Foo *f)
{
g_free(f);
}
G_DEFINE_AUTOPTR_CLEANUP_FUNC(Foo, foo_free);
int main(void) { return 0; }
EOF
if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
if cc_has_warning_flag "-Wno-unused-function"; then
glib_cflags="$glib_cflags -Wno-unused-function"
CFLAGS="$CFLAGS -Wno-unused-function"
fi
fi
#########################################
# zlib check
if test "$zlib" != "no" ; then
if $pkg_config --exists zlib; then
zlib_cflags=$($pkg_config --cflags zlib)
zlib_libs=$($pkg_config --libs zlib)
QEMU_CFLAGS="$zlib_cflags $QEMU_CFLAGS"
LIBS="$zlib_libs $LIBS"
else
cat > $TMPC << EOF
#include <zlib.h>
int main(void) { zlibVersion(); return 0; }
EOF
if compile_prog "" "-lz" ; then
LIBS="$LIBS -lz"
else
error_exit "zlib check failed" \
"Make sure to have the zlib libs and headers installed."
fi
fi
fi
##########################################
# SHA command probe for modules
if test "$modules" = yes; then
shacmd_probe="sha1sum sha1 shasum"
for c in $shacmd_probe; do
if has $c; then
shacmd="$c"
break
fi
done
if test "$shacmd" = ""; then
error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
fi
fi
##########################################
# pixman support probe
if test "$want_tools" = "no" && test "$softmmu" = "no"; then
pixman_cflags=
pixman_libs=
elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then
pixman_cflags=$($pkg_config --cflags pixman-1)
pixman_libs=$($pkg_config --libs pixman-1)
else
error_exit "pixman >= 0.21.8 not present." \
"Please install the pixman devel package."
fi
##########################################
# libmpathpersist probe
if test "$mpath" != "no" ; then
# probe for the new API
cat > $TMPC <<EOF
#include <libudev.h>
#include <mpath_persist.h>
unsigned mpath_mx_alloc_len = 1024;
int logsink;
static struct config *multipath_conf;
extern struct udev *udev;
extern struct config *get_multipath_config(void);
extern void put_multipath_config(struct config *conf);
struct udev *udev;
struct config *get_multipath_config(void) { return multipath_conf; }
void put_multipath_config(struct config *conf) { }
int main(void) {
udev = udev_new();
multipath_conf = mpath_lib_init();
return 0;
}
EOF
if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
mpathpersist=yes
mpathpersist_new_api=yes
else
# probe for the old API
cat > $TMPC <<EOF
#include <libudev.h>
#include <mpath_persist.h>
unsigned mpath_mx_alloc_len = 1024;
int logsink;
int main(void) {
struct udev *udev = udev_new();
mpath_lib_init(udev);
return 0;
}
EOF
if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
mpathpersist=yes
mpathpersist_new_api=no
else
mpathpersist=no
fi
fi
else
mpathpersist=no
fi
##########################################
# pthread probe
PTHREADLIBS_LIST="-pthread -lpthread -lpthreadGC2"
pthread=no
cat > $TMPC << EOF
#include <pthread.h>
static void *f(void *p) { return NULL; }
int main(void) {
pthread_t thread;
pthread_create(&thread, 0, f, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
pthread=yes
else
for pthread_lib in $PTHREADLIBS_LIST; do
if compile_prog "" "$pthread_lib" ; then
pthread=yes
found=no
for lib_entry in $LIBS; do
if test "$lib_entry" = "$pthread_lib"; then
found=yes
break
fi
done
if test "$found" = "no"; then
LIBS="$pthread_lib $LIBS"
libs_qga="$pthread_lib $libs_qga"
fi
tests: introduce a framework for testing migration performance This introduces a moderately general purpose framework for testing performance of migration. The initial guest workload is provided by the included 'stress' program, which is configured to spawn one thread per guest CPU and run a maximally memory intensive workload. It will loop over GB of memory, xor'ing each byte with data from a 4k array of random bytes. This ensures heavy read and write load across all of guest memory to stress the migration performance. While running the 'stress' program will record how long it takes to xor each GB of memory and print this data for later reporting. The test engine will spawn a pair of QEMU processes, either on the same host, or with the target on a remote host via ssh, using the host kernel and a custom initrd built with 'stress' as the /init binary. Kernel command line args are set to ensure a fast kernel boot time (< 1 second) between launching QEMU and the stress program starting execution. None the less, the test engine will initially wait N seconds for the guest workload to stablize, before starting the migration operation. When migration is running, the engine will use pause, post-copy, autoconverge, xbzrle compression and multithread compression features, as well as downtime & bandwidth tuning to encourage completion. If migration completes, the test engine will wait N seconds again for the guest workooad to stablize on the target host. If migration does not complete after a preset number of iterations, it will be aborted. While the QEMU process is running on the source host, the test engine will sample the host CPU usage of QEMU as a whole, and each vCPU thread. While migration is running, it will record all the stats reported by 'query-migration'. Finally, it will capture the output of the stress program running in the guest. All the data produced from a single test execution is recorded in a structured JSON file. A separate program is then able to create interactive charts using the "plotly" python + javascript libraries, showing the characteristics of the migration. The data output provides visualization of the effect on guest vCPU workloads from the migration process, the corresponding vCPU utilization on the host, and the overall CPU hit from QEMU on the host. This is correlated from statistics from the migration process, such as downtime, vCPU throttling and iteration number. While the tests can be run individually with arbitrary parameters, there is also a facility for producing batch reports for a number of pre-defined scenarios / comparisons, in order to be able to get standardized results across different hardware configurations (eg TCP vs RDMA, or comparing different VCPU counts / memory sizes, etc). To use this, first you must build the initrd image $ make tests/migration/initrd-stress.img To run a a one-shot test with all default parameters $ ./tests/migration/guestperf.py > result.json This has many command line args for varying its behaviour. For example, to increase the RAM size and CPU count and bind it to specific host NUMA nodes $ ./tests/migration/guestperf.py \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 \ > result.json Using mem + cpu binding is strongly recommended on NUMA machines, otherwise the guest performance results will vary wildly between runs of the test due to lucky/unlucky NUMA placement, making sensible data analysis impossible. To make it run across separate hosts: $ ./tests/migration/guestperf.py \ --dst-host somehostname > result.json To request that post-copy is enabled, with switchover after 5 iterations $ ./tests/migration/guestperf.py \ --post-copy --post-copy-iters 5 > result.json Once a result.json file is created, a graph of the data can be generated, showing guest workload performance per thread and the migration iteration points: $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu result.json To further include host vCPU utilization and overall QEMU utilization $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu \ --qemu-cpu --vcpu-cpu result.json NB, the 'guestperf-plot.py' command requires that you have the plotly python library installed. eg you must do $ pip install --user plotly Viewing the result.html file requires that you have the plotly.min.js file in the same directory as the HTML output. This js file is installed as part of the plotly python library, so can be found in $HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js The guestperf-plot.py program can accept multiple json files to plot, enabling results from different configurations to be compared. Finally, to run the entire standardized set of comparisons $ ./tests/migration/guestperf-batch.py \ --dst-host somehost \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 --output tcp-somehost-4gb-2cpu will store JSON files from all scenarios in the directory named tcp-somehost-4gb-2cpu Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-20 15:23:13 +02:00
PTHREAD_LIB="$pthread_lib"
break
fi
done
fi
if test "$mingw32" != yes && test "$pthread" = no; then
error_exit "pthread check failed" \
"Make sure to have the pthread libs and headers installed."
fi
# check for pthread_setname_np with thread id
pthread_setname_np_w_tid=no
cat > $TMPC << EOF
#include <pthread.h>
static void *f(void *p) { return NULL; }
int main(void)
{
pthread_t thread;
pthread_create(&thread, 0, f, 0);
pthread_setname_np(thread, "QEMU");
return 0;
}
EOF
if compile_prog "" "$pthread_lib" ; then
pthread_setname_np_w_tid=yes
fi
# check for pthread_setname_np without thread id
pthread_setname_np_wo_tid=no
cat > $TMPC << EOF
#include <pthread.h>
static void *f(void *p) { pthread_setname_np("QEMU"); }
int main(void)
{
pthread_t thread;
pthread_create(&thread, 0, f, 0);
return 0;
}
EOF
if compile_prog "" "$pthread_lib" ; then
pthread_setname_np_wo_tid=yes
fi
##########################################
# rbd probe
if test "$rbd" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <rbd/librbd.h>
int main(void) {
rados_t cluster;
rados_create(&cluster, NULL);
return 0;
}
EOF
rbd_libs="-lrbd -lrados"
if compile_prog "" "$rbd_libs" ; then
rbd=yes
else
if test "$rbd" = "yes" ; then
feature_not_found "rados block device" "Install librbd/ceph devel"
fi
rbd=no
fi
fi
##########################################
# libssh probe
if test "$libssh" != "no" ; then
if $pkg_config --exists libssh; then
libssh_cflags=$($pkg_config libssh --cflags)
libssh_libs=$($pkg_config libssh --libs)
libssh=yes
else
if test "$libssh" = "yes" ; then
error_exit "libssh required for --enable-libssh"
fi
libssh=no
fi
fi
##########################################
# Check for libssh 0.8
# This is done like this instead of using the LIBSSH_VERSION_* and
# SSH_VERSION_* macros because some distributions in the past shipped
# snapshots of the future 0.8 from Git, and those snapshots did not
# have updated version numbers (still referring to 0.7.0).
if test "$libssh" = "yes"; then
cat > $TMPC <<EOF
#include <libssh/libssh.h>
int main(void) { return ssh_get_server_publickey(NULL, NULL); }
EOF
if compile_prog "$libssh_cflags" "$libssh_libs"; then
libssh_cflags="-DHAVE_LIBSSH_0_8 $libssh_cflags"
fi
fi
##########################################
# linux-aio probe
if test "$linux_aio" != "no" ; then
cat > $TMPC <<EOF
#include <libaio.h>
#include <sys/eventfd.h>
#include <stddef.h>
int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
EOF
if compile_prog "" "-laio" ; then
linux_aio=yes
else
if test "$linux_aio" = "yes" ; then
feature_not_found "linux AIO" "Install libaio devel"
fi
linux_aio=no
fi
fi
##########################################
# linux-io-uring probe
if test "$linux_io_uring" != "no" ; then
if $pkg_config liburing; then
linux_io_uring_cflags=$($pkg_config --cflags liburing)
linux_io_uring_libs=$($pkg_config --libs liburing)
linux_io_uring=yes
# io_uring is used in libqemuutil.a where per-file -libs variables are not
# seen by programs linking the archive. It's not ideal, but just add the
# library dependency globally.
LIBS="$linux_io_uring_libs $LIBS"
else
if test "$linux_io_uring" = "yes" ; then
feature_not_found "linux io_uring" "Install liburing devel"
fi
linux_io_uring=no
fi
fi
##########################################
# TPM emulation is only on POSIX
if test "$tpm" = ""; then
if test "$mingw32" = "yes"; then
tpm=no
else
tpm=yes
fi
elif test "$tpm" = "yes"; then
if test "$mingw32" = "yes" ; then
error_exit "TPM emulation only available on POSIX systems"
fi
fi
##########################################
# attr probe
if test "$attr" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <sys/types.h>
#ifdef CONFIG_LIBATTR
#include <attr/xattr.h>
#else
#include <sys/xattr.h>
#endif
int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
attr=yes
# Older distros have <attr/xattr.h>, and need -lattr:
elif compile_prog "-DCONFIG_LIBATTR" "-lattr" ; then
attr=yes
LIBS="-lattr $LIBS"
libattr=yes
else
if test "$attr" = "yes" ; then
feature_not_found "ATTR" "Install libc6 or libattr devel"
fi
attr=no
fi
fi
##########################################
# iovec probe
cat > $TMPC <<EOF
#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>
int main(void) { return sizeof(struct iovec); }
EOF
iovec=no
if compile_prog "" "" ; then
iovec=yes
fi
##########################################
# preadv probe
cat > $TMPC <<EOF
#include <sys/types.h>
#include <sys/uio.h>
#include <unistd.h>
int main(void) { return preadv(0, 0, 0, 0); }
EOF
preadv=no
if compile_prog "" "" ; then
preadv=yes
fi
##########################################
# fdt probe
# fdt support is mandatory for at least some target architectures,
# so insist on it if we're building those system emulators.
fdt_required=no
for target in $target_list; do
case $target in
aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu|rx-softmmu)
fdt_required=yes
;;
esac
done
if test "$fdt_required" = "yes"; then
if test "$fdt" = "no"; then
error_exit "fdt disabled but some requested targets require it." \
"You can turn off fdt only if you also disable all the system emulation" \
"targets which need it (by specifying a cut down --target-list)."
fi
fdt=yes
elif test "$fdt" != "yes" ; then
fdt=no
fi
# fdt is only required when building softmmu targets
if test -z "$fdt" -a "$softmmu" != "yes" ; then
fdt="no"
fi
if test "$fdt" != "no" ; then
fdt_libs="-lfdt"
# explicitly check for libfdt_env.h as it is missing in some stable installs
# and test for required functions to make sure we are on a version >= 1.4.2
cat > $TMPC << EOF
#include <libfdt.h>
#include <libfdt_env.h>
int main(void) { fdt_check_full(NULL, 0); return 0; }
EOF
if compile_prog "" "$fdt_libs" ; then
# system DTC is good - use it
fdt=system
else
# have GIT checkout, so activate dtc submodule
if test -e "${source_path}/.git" ; then
git_submodules="${git_submodules} dtc"
fi
if test -d "${source_path}/dtc/libfdt" || test -e "${source_path}/.git" ; then
fdt=git
mkdir -p dtc
if [ "$pwd_is_source_path" != "y" ] ; then
symlink "$source_path/dtc/Makefile" "dtc/Makefile"
symlink "$source_path/dtc/scripts" "dtc/scripts"
fi
fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt"
configure: Really use local libfdt if the system one is too old QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-04-16 01:05:19 +02:00
fdt_ldflags="-L\$(BUILD_DIR)/dtc/libfdt"
fdt_libs="$fdt_libs"
elif test "$fdt" = "yes" ; then
# Not a git build & no libfdt found, prompt for system install
error_exit "DTC (libfdt) version >= 1.4.2 not present." \
"Please install the DTC (libfdt) devel package"
else
# don't have and don't want
fdt_libs=
fdt=no
fi
fi
fi
libs_softmmu="$libs_softmmu $fdt_libs"
##########################################
# opengl probe (for sdl2, gtk, milkymist-tmu2)
gbm="no"
if $pkg_config gbm; then
gbm_cflags="$($pkg_config --cflags gbm)"
gbm_libs="$($pkg_config --libs gbm)"
gbm="yes"
fi
if test "$opengl" != "no" ; then
opengl_pkgs="epoxy gbm"
if $pkg_config $opengl_pkgs; then
opengl_cflags="$($pkg_config --cflags $opengl_pkgs)"
opengl_libs="$($pkg_config --libs $opengl_pkgs)"
opengl=yes
if test "$gtk" = "yes" && $pkg_config --exists "$gtkpackage >= 3.16"; then
gtk_gl="yes"
fi
QEMU_CFLAGS="$QEMU_CFLAGS $opengl_cflags"
else
if test "$opengl" = "yes" ; then
feature_not_found "opengl" "Please install opengl (mesa) devel pkgs: $opengl_pkgs"
fi
opengl_cflags=""
opengl_libs=""
opengl=no
fi
fi
if test "$opengl" = "yes"; then
cat > $TMPC << EOF
#include <epoxy/egl.h>
#ifndef EGL_MESA_image_dma_buf_export
# error mesa/epoxy lacks support for dmabufs (mesa 10.6+)
#endif
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
opengl_dmabuf=yes
fi
fi
if test "$opengl" = "yes" && test "$have_x11" = "yes"; then
for target in $target_list; do
case $target in
lm32-softmmu) # milkymist-tmu2 requires X11 and OpenGL
need_x11=yes
;;
esac
done
fi
##########################################
# libxml2 probe
if test "$libxml2" != "no" ; then
if $pkg_config --exists libxml-2.0; then
libxml2="yes"
libxml2_cflags=$($pkg_config --cflags libxml-2.0)
libxml2_libs=$($pkg_config --libs libxml-2.0)
else
if test "$libxml2" = "yes"; then
feature_not_found "libxml2" "Install libxml2 devel"
fi
libxml2="no"
fi
fi
##########################################
# glusterfs probe
if test "$glusterfs" != "no" ; then
if $pkg_config --atleast-version=3 glusterfs-api; then
glusterfs="yes"
glusterfs_cflags=$($pkg_config --cflags glusterfs-api)
glusterfs_libs=$($pkg_config --libs glusterfs-api)
if $pkg_config --atleast-version=4 glusterfs-api; then
glusterfs_xlator_opt="yes"
fi
if $pkg_config --atleast-version=5 glusterfs-api; then
glusterfs_discard="yes"
fi
if $pkg_config --atleast-version=6 glusterfs-api; then
glusterfs_fallocate="yes"
glusterfs_zerofill="yes"
fi
cat > $TMPC << EOF
#include <glusterfs/api/glfs.h>
int
main(void)
{
/* new glfs_ftruncate() passes two additional args */
return glfs_ftruncate(NULL, 0, NULL, NULL);
}
EOF
if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
glusterfs_ftruncate_has_stat="yes"
fi
cat > $TMPC << EOF
#include <glusterfs/api/glfs.h>
/* new glfs_io_cbk() passes two additional glfs_stat structs */
static void
glusterfs_iocb(glfs_fd_t *fd, ssize_t ret, struct glfs_stat *prestat, struct glfs_stat *poststat, void *data)
{}
int
main(void)
{
glfs_io_cbk iocb = &glusterfs_iocb;
iocb(NULL, 0 , NULL, NULL, NULL);
return 0;
}
EOF
if compile_prog "$glusterfs_cflags" "$glusterfs_libs" ; then
glusterfs_iocb_has_stat="yes"
fi
else
if test "$glusterfs" = "yes" ; then
feature_not_found "GlusterFS backend support" \
"Install glusterfs-api devel >= 3"
fi
glusterfs="no"
fi
fi
# Check for inotify functions when we are building linux-user
# emulator. This is done because older glibc versions don't
# have syscall stubs for these implemented. In that case we
# don't provide them even if kernel supports them.
#
inotify=no
cat > $TMPC << EOF
#include <sys/inotify.h>
int
main(void)
{
/* try to start inotify */
return inotify_init();
}
EOF
if compile_prog "" "" ; then
inotify=yes
fi
inotify1=no
cat > $TMPC << EOF
#include <sys/inotify.h>
int
main(void)
{
/* try to start inotify */
return inotify_init1(0);
}
EOF
if compile_prog "" "" ; then
inotify1=yes
fi
# check if pipe2 is there
pipe2=no
cat > $TMPC << EOF
#include <unistd.h>
#include <fcntl.h>
int main(void)
{
int pipefd[2];
return pipe2(pipefd, O_CLOEXEC);
}
EOF
if compile_prog "" "" ; then
pipe2=yes
fi
# check if accept4 is there
accept4=no
cat > $TMPC << EOF
#include <sys/socket.h>
#include <stddef.h>
int main(void)
{
accept4(0, NULL, NULL, SOCK_CLOEXEC);
return 0;
}
EOF
if compile_prog "" "" ; then
accept4=yes
fi
# check if tee/splice is there. vmsplice was added same time.
splice=no
cat > $TMPC << EOF
#include <unistd.h>
#include <fcntl.h>
#include <limits.h>
int main(void)
{
int len, fd = 0;
len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
return 0;
}
EOF
if compile_prog "" "" ; then
splice=yes
fi
##########################################
# libnuma probe
if test "$numa" != "no" ; then
cat > $TMPC << EOF
#include <numa.h>
int main(void) { return numa_available(); }
EOF
if compile_prog "" "-lnuma" ; then
numa=yes
libs_softmmu="-lnuma $libs_softmmu"
else
if test "$numa" = "yes" ; then
feature_not_found "numa" "install numactl devel"
fi
numa=no
fi
fi
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
if test "$tcmalloc" = "yes" && test "$jemalloc" = "yes" ; then
echo "ERROR: tcmalloc && jemalloc can't be used at the same time"
exit 1
fi
# Even if malloc_trim() is available, these non-libc memory allocators
# do not support it.
if test "$tcmalloc" = "yes" || test "$jemalloc" = "yes" ; then
if test "$malloc_trim" = "yes" ; then
echo "Disabling malloc_trim with non-libc memory allocator"
fi
malloc_trim="no"
fi
#######################################
# malloc_trim
if test "$malloc_trim" != "no" ; then
cat > $TMPC << EOF
#include <malloc.h>
int main(void) { malloc_trim(0); return 0; }
EOF
if compile_prog "" "" ; then
malloc_trim="yes"
else
malloc_trim="no"
fi
fi
##########################################
# tcmalloc probe
if test "$tcmalloc" = "yes" ; then
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) { malloc(1); return 0; }
EOF
if compile_prog "" "-ltcmalloc" ; then
LIBS="-ltcmalloc $LIBS"
else
feature_not_found "tcmalloc" "install gperftools devel"
fi
fi
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
##########################################
# jemalloc probe
if test "$jemalloc" = "yes" ; then
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) { malloc(1); return 0; }
EOF
if compile_prog "" "-ljemalloc" ; then
LIBS="-ljemalloc $LIBS"
else
feature_not_found "jemalloc" "install jemalloc devel"
fi
fi
##########################################
# signalfd probe
signalfd="no"
cat > $TMPC << EOF
#include <unistd.h>
#include <sys/syscall.h>
#include <signal.h>
int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
EOF
if compile_prog "" "" ; then
signalfd=yes
fi
qemu-io: Add generic function for reinitializing optind. On FreeBSD 11.2: $ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd' Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write After main option parsing, we reinitialize optind so we can parse each command. However reinitializing optind to 0 does not work on FreeBSD. What happens when you do this is optind remains 0 after the option parsing loop, and the result is we try to parse argv[optind] == argv[0] == "aio_write" as if it was the first parameter. The FreeBSD manual page says: In order to use getopt() to evaluate multiple sets of arguments, or to evaluate a single set of arguments multiple times, the variable optreset must be set to 1 before the second and each additional set of calls to getopt(), and the variable optind must be reinitialized. (From the rest of the man page it is clear that optind must be reinitialized to 1). The glibc man page says: A program that scans multiple argument vectors, or rescans the same vector more than once, and wants to make use of GNU extensions such as '+' and '-' at the start of optstring, or changes the value of POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting optind to 0, rather than the traditional value of 1. (Resetting to 0 forces the invocation of an internal initialization routine that rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.) This commit introduces an OS-portability function called qemu_reset_optind which provides a way of resetting optind that works on FreeBSD and platforms that use optreset, while keeping it the same as now on other platforms. Note that the qemu codebase sets optind in many other places, but in those other places it's setting a local variable and not using getopt. This change is only needed in places where we are using getopt and the associated global variable optind. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 20190118101114.11759-2-rjones@redhat.com Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-18 11:11:14 +01:00
# check if optreset global is declared by <getopt.h>
optreset="no"
cat > $TMPC << EOF
#include <getopt.h>
int main(void) { return optreset; }
EOF
if compile_prog "" "" ; then
optreset=yes
fi
# check if eventfd is supported
eventfd=no
cat > $TMPC << EOF
#include <sys/eventfd.h>
int main(void)
{
return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
}
EOF
if compile_prog "" "" ; then
eventfd=yes
fi
# check if memfd is supported
memfd=no
cat > $TMPC << EOF
#include <sys/mman.h>
int main(void)
{
return memfd_create("foo", MFD_ALLOW_SEALING);
}
EOF
if compile_prog "" "" ; then
memfd=yes
fi
# check for usbfs
have_usbfs=no
if test "$linux_user" = "yes"; then
cat > $TMPC << EOF
#include <linux/usbdevice_fs.h>
#ifndef USBDEVFS_GET_CAPABILITIES
#error "USBDEVFS_GET_CAPABILITIES undefined"
#endif
#ifndef USBDEVFS_DISCONNECT_CLAIM
#error "USBDEVFS_DISCONNECT_CLAIM undefined"
#endif
int main(void)
{
return 0;
}
EOF
if compile_prog "" ""; then
have_usbfs=yes
fi
fi
# check for fallocate
fallocate=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
fallocate(0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate=yes
fi
# check for fallocate hole punching
fallocate_punch_hole=no
cat > $TMPC << EOF
#include <fcntl.h>
#include <linux/falloc.h>
int main(void)
{
fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate_punch_hole=yes
fi
# check that fallocate supports range zeroing inside the file
fallocate_zero_range=no
cat > $TMPC << EOF
#include <fcntl.h>
#include <linux/falloc.h>
int main(void)
{
fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fallocate_zero_range=yes
fi
# check for posix_fallocate
posix_fallocate=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
posix_fallocate(0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
posix_fallocate=yes
fi
# check for sync_file_range
sync_file_range=no
cat > $TMPC << EOF
#include <fcntl.h>
int main(void)
{
sync_file_range(0, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
sync_file_range=yes
fi
# check for linux/fiemap.h and FS_IOC_FIEMAP
fiemap=no
cat > $TMPC << EOF
#include <sys/ioctl.h>
#include <linux/fs.h>
#include <linux/fiemap.h>
int main(void)
{
ioctl(0, FS_IOC_FIEMAP, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
fiemap=yes
fi
# check for dup3
dup3=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void)
{
dup3(0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
dup3=yes
fi
# check for ppoll support
ppoll=no
cat > $TMPC << EOF
#include <poll.h>
int main(void)
{
struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
ppoll(&pfd, 1, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
ppoll=yes
fi
# check for prctl(PR_SET_TIMERSLACK , ... ) support
prctl_pr_set_timerslack=no
cat > $TMPC << EOF
#include <sys/prctl.h>
int main(void)
{
prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
prctl_pr_set_timerslack=yes
fi
# check for epoll support
epoll=no
cat > $TMPC << EOF
#include <sys/epoll.h>
int main(void)
{
epoll_create(0);
return 0;
}
EOF
if compile_prog "" "" ; then
epoll=yes
fi
# epoll_create1 is a later addition
# so we must check separately for its presence
epoll_create1=no
cat > $TMPC << EOF
#include <sys/epoll.h>
int main(void)
{
/* Note that we use epoll_create1 as a value, not as
* a function being called. This is necessary so that on
* old SPARC glibc versions where the function was present in
* the library but not declared in the header file we will
* fail the configure check. (Otherwise we will get a compiler
* warning but not an error, and will proceed to fail the
* qemu compile where we compile with -Werror.)
*/
return (int)(uintptr_t)&epoll_create1;
}
EOF
if compile_prog "" "" ; then
epoll_create1=yes
fi
# check for sendfile support
sendfile=no
cat > $TMPC << EOF
#include <sys/sendfile.h>
int main(void)
{
return sendfile(0, 0, 0, 0);
}
EOF
if compile_prog "" "" ; then
sendfile=yes
fi
# check for timerfd support (glibc 2.8 and newer)
timerfd=no
cat > $TMPC << EOF
#include <sys/timerfd.h>
int main(void)
{
return(timerfd_create(CLOCK_REALTIME, 0));
}
EOF
if compile_prog "" "" ; then
timerfd=yes
fi
# check for setns and unshare support
setns=no
cat > $TMPC << EOF
#include <sched.h>
int main(void)
{
int ret;
ret = setns(0, 0);
ret = unshare(0);
return ret;
}
EOF
if compile_prog "" "" ; then
setns=yes
fi
# clock_adjtime probe
clock_adjtime=no
cat > $TMPC <<EOF
#include <time.h>
int main(void)
{
return clock_adjtime(0, 0);
}
EOF
clock_adjtime=no
if compile_prog "" "" ; then
clock_adjtime=yes
fi
# syncfs probe
syncfs=no
cat > $TMPC <<EOF
#include <unistd.h>
int main(void)
{
return syncfs(0);
}
EOF
syncfs=no
if compile_prog "" "" ; then
syncfs=yes
fi
# check for kcov support (kernel must be 4.4+, compiled with certain options)
kcov=no
if check_include sys/kcov.h ; then
kcov=yes
fi
# If we're making warnings fatal, apply this to Sphinx runs as well
sphinx_werror=""
if test "$werror" = "yes"; then
sphinx_werror="-W"
fi
# Check we have a new enough version of sphinx-build
has_sphinx_build() {
# This is a bit awkward but works: create a trivial document and
# try to run it with our configuration file (which enforces a
# version requirement). This will fail if either
# sphinx-build doesn't exist at all or if it is too old.
mkdir -p "$TMPDIR1/sphinx"
touch "$TMPDIR1/sphinx/index.rst"
"$sphinx_build" $sphinx_werror -c "$source_path/docs" \
-b html "$TMPDIR1/sphinx" \
"$TMPDIR1/sphinx/out" >> config.log 2>&1
}
# Check if tools are available to build documentation.
if test "$docs" != "no" ; then
if has_sphinx_build; then
sphinx_ok=yes
else
sphinx_ok=no
fi
if has makeinfo && has pod2man && test "$sphinx_ok" = "yes"; then
docs=yes
else
if test "$docs" = "yes" ; then
if has $sphinx_build && test "$sphinx_ok" != "yes"; then
echo "Warning: $sphinx_build exists but it is either too old or uses too old a Python version" >&2
fi
feature_not_found "docs" "Install texinfo, Perl/perl-podlators and a Python 3 version of python-sphinx"
fi
docs=no
fi
fi
# Search for bswap_32 function
byteswap_h=no
cat > $TMPC << EOF
#include <byteswap.h>
int main(void) { return bswap_32(0); }
EOF
if compile_prog "" "" ; then
byteswap_h=yes
fi
# Search for bswap32 function
bswap_h=no
cat > $TMPC << EOF
#include <sys/endian.h>
#include <sys/types.h>
#include <machine/bswap.h>
int main(void) { return bswap32(0); }
EOF
if compile_prog "" "" ; then
bswap_h=yes
fi
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
##########################################
# Do we have libiscsi >= 1.9.0
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
if test "$libiscsi" != "no" ; then
if $pkg_config --atleast-version=1.9.0 libiscsi; then
libiscsi="yes"
libiscsi_cflags=$($pkg_config --cflags libiscsi)
libiscsi_libs=$($pkg_config --libs libiscsi)
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
else
if test "$libiscsi" = "yes" ; then
feature_not_found "libiscsi" "Install libiscsi >= 1.9.0"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
fi
libiscsi="no"
fi
fi
##########################################
# Do we need libm
cat > $TMPC << EOF
#include <math.h>
int main(int argc, char **argv) { return isnan(sin((double)argc)); }
EOF
if compile_prog "" "" ; then
:
elif compile_prog "" "-lm" ; then
LIBS="-lm $LIBS"
libs_qga="-lm $libs_qga"
else
error_exit "libm check failed"
fi
##########################################
# Do we need librt
# uClibc provides 2 versions of clock_gettime(), one with realtime
# support and one without. This means that the clock_gettime() don't
# need -lrt. We still need it for timer_create() so we check for this
# function in addition.
cat > $TMPC <<EOF
#include <signal.h>
#include <time.h>
int main(void) {
timer_create(CLOCK_REALTIME, NULL, NULL);
return clock_gettime(CLOCK_REALTIME, NULL);
}
EOF
if compile_prog "" "" ; then
:
# we need pthread for static linking. use previous pthread test result
elif compile_prog "" "$pthread_lib -lrt" ; then
LIBS="$LIBS -lrt"
libs_qga="$libs_qga -lrt"
fi
# Check whether we need to link libutil for openpty()
cat > $TMPC << EOF
extern int openpty(int *am, int *as, char *name, void *termp, void *winp);
int main(void) { return openpty(0, 0, 0, 0, 0); }
EOF
if ! compile_prog "" "" ; then
if compile_prog "" "-lutil" ; then
libs_softmmu="-lutil $libs_softmmu"
libs_tools="-lutil $libs_tools"
fi
fi
##########################################
2010-03-24 10:26:51 +01:00
# spice probe
if test "$spice" != "no" ; then
cat > $TMPC << EOF
#include <spice.h>
int main(void) { spice_server_new(); return 0; }
EOF
spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
if $pkg_config --atleast-version=0.12.5 spice-server && \
$pkg_config --atleast-version=0.12.3 spice-protocol && \
2010-03-24 10:26:51 +01:00
compile_prog "$spice_cflags" "$spice_libs" ; then
spice="yes"
libs_softmmu="$libs_softmmu $spice_libs"
QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags"
spice_protocol_version=$($pkg_config --modversion spice-protocol)
spice_server_version=$($pkg_config --modversion spice-server)
2010-03-24 10:26:51 +01:00
else
if test "$spice" = "yes" ; then
feature_not_found "spice" \
"Install spice-server(>=0.12.5) and spice-protocol(>=0.12.3) devel"
2010-03-24 10:26:51 +01:00
fi
spice="no"
fi
fi
# check for smartcard support
if test "$smartcard" != "no"; then
if $pkg_config --atleast-version=2.5.1 libcacard; then
libcacard_cflags=$($pkg_config --cflags libcacard)
libcacard_libs=$($pkg_config --libs libcacard)
smartcard="yes"
else
if test "$smartcard" = "yes"; then
feature_not_found "smartcard" "Install libcacard devel"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
fi
smartcard="no"
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
fi
fi
# check for libusb
if test "$libusb" != "no" ; then
if $pkg_config --atleast-version=1.0.13 libusb-1.0; then
libusb="yes"
libusb_cflags=$($pkg_config --cflags libusb-1.0)
libusb_libs=$($pkg_config --libs libusb-1.0)
else
if test "$libusb" = "yes"; then
feature_not_found "libusb" "Install libusb devel >= 1.0.13"
fi
libusb="no"
fi
fi
# check for usbredirparser for usb network redirection support
if test "$usb_redir" != "no" ; then
if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then
usb_redir="yes"
usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5)
usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5)
else
if test "$usb_redir" = "yes"; then
feature_not_found "usb-redir" "Install usbredir devel"
fi
usb_redir="no"
fi
fi
##########################################
# check if we have VSS SDK headers for win
if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
test "$vss_win32_sdk" != "no" ; then
case "$vss_win32_sdk" in
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
"") vss_win32_include="-isystem $source_path" ;;
*\ *) # The SDK is installed in "Program Files" by default, but we cannot
# handle path with spaces. So we symlink the headers into ".sdk/vss".
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
vss_win32_include="-isystem $source_path/.sdk/vss"
symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
;;
configure: mark qemu-ga VSS includes as system headers As of e4650c81, we do w32 builds with -Werror enabled. Unfortunately for cases where we enable VSS support in qemu-ga, we still have warnings generated by VSS includes that ship as part of the Microsoft VSS SDK. We can selectively address a number of these warnings using #pragma GCC diagnostic ignored ... but at least one of these: warning: ‘typedef’ was ignored in this declaration resulting from declarations of the form: typedef struct Blah { ... }; does not provide a specific command-line/pragma option to disable warnings of the sort. To allow VSS builds to succeed, the next-best option is disabling these warnings on a per-file basis. pragmas like #pragma GCC system_header can be used to declare subsequent includes/declarations as being exempt from normal warnings, but this must be done within a header file. Since we don't control the VSS SDK, we'd need to rely on a intermediate header include to accomplish this, and since different objects in the VSS link target rely on different headers from the VSS SDK, this would become somewhat of a rat's nest (though not totally unmanageable). The next step up in granularity is just marking the entire VSS SDK include path as system headers via -isystem. This is a bit more heavy-handed, but since this SDK hasn't changed since 2005, there's likely little to be gained from selectively disabling warnings anyway, so we implement that approach here. This fixes the -Werror failures in both the configure test and the qga build due to shared reliance on $vss_win32_include. For the same reason, this also enforces a new dependency on -isystem support in the C/C++ compiler when building QGA with VSS enabled. Cc: Thomas Huth <thuth@redhat.com> Cc: Stefan Weil <sw@weilnetz.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2016-06-29 00:31:49 +02:00
*) vss_win32_include="-isystem $vss_win32_sdk"
esac
cat > $TMPC << EOF
#define __MIDL_user_allocate_free_DEFINED__
#include <inc/win2003/vss.h>
int main(void) { return VSS_CTX_BACKUP; }
EOF
if compile_prog "$vss_win32_include" "" ; then
guest_agent_with_vss="yes"
QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include"
libs_qga="-lole32 -loleaut32 -lshlwapi -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
qga_vss_provider="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb"
else
if test "$vss_win32_sdk" != "" ; then
echo "ERROR: Please download and install Microsoft VSS SDK:"
echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490"
echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
echo "ERROR: scripts/extract-vsssdk-headers setup.exe"
echo "ERROR: The headers are extracted in the directory \`inc'."
feature_not_found "VSS support"
fi
guest_agent_with_vss="no"
fi
fi
##########################################
# lookup Windows platform SDK (if not specified)
# The SDK is needed only to build .tlb (type library) file of guest agent
# VSS provider from the source. It is usually unnecessary because the
# pre-compiled .tlb file is included.
if test "$mingw32" = "yes" && test "$guest_agent" != "no" && \
test "$guest_agent_with_vss" = "yes" ; then
if test -z "$win_sdk"; then
programfiles="$PROGRAMFILES"
test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432"
if test -n "$programfiles"; then
win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null
else
feature_not_found "Windows SDK"
fi
elif test "$win_sdk" = "no"; then
win_sdk=""
fi
fi
##########################################
# check if mingw environment provides a recent ntddscsi.h
if test "$mingw32" = "yes" && test "$guest_agent" != "no"; then
cat > $TMPC << EOF
#include <windows.h>
#include <ntddscsi.h>
int main(void) {
#if !defined(IOCTL_SCSI_GET_ADDRESS)
#error Missing required ioctl definitions
#endif
SCSI_ADDRESS addr = { .Lun = 0, .TargetId = 0, .PathId = 0 };
return addr.Lun;
}
EOF
if compile_prog "" "" ; then
guest_agent_ntddscsi=yes
libs_qga="-lsetupapi -lcfgmgr32 $libs_qga"
fi
fi
##########################################
# virgl renderer probe
if test "$virglrenderer" != "no" ; then
cat > $TMPC << EOF
#include <virglrenderer.h>
int main(void) { virgl_renderer_poll(); return 0; }
EOF
virgl_cflags=$($pkg_config --cflags virglrenderer 2>/dev/null)
virgl_libs=$($pkg_config --libs virglrenderer 2>/dev/null)
virgl_version=$($pkg_config --modversion virglrenderer 2>/dev/null)
if $pkg_config virglrenderer >/dev/null 2>&1 && \
compile_prog "$virgl_cflags" "$virgl_libs" ; then
virglrenderer="yes"
else
if test "$virglrenderer" = "yes" ; then
feature_not_found "virglrenderer"
fi
virglrenderer="no"
fi
fi
##########################################
# capstone
case "$capstone" in
"" | yes)
if $pkg_config capstone; then
capstone=system
elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
capstone=git
elif test -e "${source_path}/capstone/Makefile" ; then
capstone=internal
elif test -z "$capstone" ; then
capstone=no
else
feature_not_found "capstone" "Install capstone devel or git submodule"
fi
;;
system)
if ! $pkg_config capstone; then
feature_not_found "capstone" "Install capstone devel"
fi
;;
esac
case "$capstone" in
git | internal)
if test "$capstone" = git; then
git_submodules="${git_submodules} capstone"
fi
mkdir -p capstone
QEMU_CFLAGS="$QEMU_CFLAGS -I\$(SRC_PATH)/capstone/include"
if test "$mingw32" = "yes"; then
LIBCAPSTONE=capstone.lib
else
LIBCAPSTONE=libcapstone.a
fi
libs_cpu="-L\$(BUILD_DIR)/capstone -lcapstone $libs_cpu"
;;
system)
QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)"
libs_cpu="$($pkg_config --libs capstone) $libs_cpu"
;;
no)
;;
*)
error_exit "Unknown state for capstone: $capstone"
;;
esac
##########################################
# check if we have fdatasync
fdatasync=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void) {
#if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
return fdatasync(0);
#else
#error Not supported
#endif
}
EOF
if compile_prog "" "" ; then
fdatasync=yes
fi
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
##########################################
# check if we have madvise
madvise=no
cat > $TMPC << EOF
#include <sys/types.h>
#include <sys/mman.h>
#include <stddef.h>
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
EOF
if compile_prog "" "" ; then
madvise=yes
fi
##########################################
# check if we have posix_madvise
posix_madvise=no
cat > $TMPC << EOF
#include <sys/mman.h>
#include <stddef.h>
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
EOF
if compile_prog "" "" ; then
posix_madvise=yes
fi
##########################################
# check if we have posix_memalign()
posix_memalign=no
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) {
void *p;
return posix_memalign(&p, 8, 8);
}
EOF
if compile_prog "" "" ; then
posix_memalign=yes
fi
##########################################
# check if we have posix_syslog
posix_syslog=no
cat > $TMPC << EOF
#include <syslog.h>
int main(void) { openlog("qemu", LOG_PID, LOG_DAEMON); syslog(LOG_INFO, "configure"); return 0; }
EOF
if compile_prog "" "" ; then
posix_syslog=yes
fi
##########################################
# check if we have sem_timedwait
sem_timedwait=no
cat > $TMPC << EOF
#include <semaphore.h>
int main(void) { sem_t s; struct timespec t = {0}; return sem_timedwait(&s, &t); }
EOF
if compile_prog "" "" ; then
sem_timedwait=yes
fi
##########################################
# check if we have strchrnul
strchrnul=no
cat > $TMPC << EOF
#include <string.h>
int main(void);
// Use a haystack that the compiler shouldn't be able to constant fold
char *haystack = (char*)&main;
int main(void) { return strchrnul(haystack, 'x') != &haystack[6]; }
EOF
if compile_prog "" "" ; then
strchrnul=yes
fi
#########################################
# check if we have st_atim
st_atim=no
cat > $TMPC << EOF
#include <sys/stat.h>
#include <stddef.h>
int main(void) { return offsetof(struct stat, st_atim); }
EOF
if compile_prog "" "" ; then
st_atim=yes
fi
##########################################
# check if trace backend exists
$python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends > /dev/null 2> /dev/null
if test "$?" -ne 0 ; then
error_exit "invalid trace backends" \
"Please choose supported trace backends."
fi
##########################################
# For 'ust' backend, test if ust headers are present
if have_backend "ust"; then
cat > $TMPC << EOF
#include <lttng/tracepoint.h>
int main(void) { return 0; }
EOF
if compile_prog "" "-Wl,--no-as-needed -ldl" ; then
if $pkg_config lttng-ust --exists; then
lttng_ust_libs=$($pkg_config --libs lttng-ust)
else
lttng_ust_libs="-llttng-ust -ldl"
fi
if $pkg_config liburcu-bp --exists; then
urcu_bp_libs=$($pkg_config --libs liburcu-bp)
else
urcu_bp_libs="-lurcu-bp"
fi
LIBS="$lttng_ust_libs $urcu_bp_libs $LIBS"
libs_qga="$lttng_ust_libs $urcu_bp_libs $libs_qga"
else
error_exit "Trace backend 'ust' missing lttng-ust header files"
fi
fi
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
##########################################
# For 'dtrace' backend, test if 'dtrace' command is present
if have_backend "dtrace"; then
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
if ! has 'dtrace' ; then
error_exit "dtrace command is not found in PATH $PATH"
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
fi
trace_backend_stap="no"
if has 'stap' ; then
trace_backend_stap="yes"
fi
Add a DTrace tracing backend targetted for SystemTAP compatability This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-11-12 14:20:24 +01:00
fi
##########################################
# check and set a backend for coroutine
# We prefer ucontext, but it's not always possible. The fallback
# is sigcontext. On Windows the only valid backend is the Windows
# specific one.
ucontext_works=no
if test "$darwin" != "yes"; then
cat > $TMPC << EOF
#include <ucontext.h>
#ifdef __stub_makecontext
#error Ignoring glibc stub makecontext which will always fail
#endif
int main(void) { makecontext(0, 0, 0); return 0; }
EOF
if compile_prog "" "" ; then
ucontext_works=yes
fi
fi
if test "$coroutine" = ""; then
if test "$mingw32" = "yes"; then
coroutine=win32
elif test "$ucontext_works" = "yes"; then
coroutine=ucontext
else
coroutine=sigaltstack
fi
else
case $coroutine in
windows)
if test "$mingw32" != "yes"; then
error_exit "'windows' coroutine backend only valid for Windows"
fi
# Unfortunately the user visible backend name doesn't match the
# coroutine-*.c filename for this case, so we have to adjust it here.
coroutine=win32
;;
ucontext)
if test "$ucontext_works" != "yes"; then
feature_not_found "ucontext"
fi
;;
sigaltstack)
if test "$mingw32" = "yes"; then
error_exit "only the 'windows' coroutine backend is valid for Windows"
fi
;;
*)
error_exit "unknown coroutine backend $coroutine"
;;
esac
fi
if test "$coroutine_pool" = ""; then
coroutine_pool=yes
fi
if test "$debug_stack_usage" = "yes"; then
if test "$coroutine_pool" = "yes"; then
echo "WARN: disabling coroutine pool for stack usage debugging"
coroutine_pool=no
fi
fi
##########################################
# check if we have open_by_handle_at
open_by_handle_at=no
cat > $TMPC << EOF
#include <fcntl.h>
#if !defined(AT_EMPTY_PATH)
# error missing definition
#else
int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
#endif
EOF
if compile_prog "" "" ; then
open_by_handle_at=yes
fi
########################################
# check if we have linux/magic.h
linux_magic_h=no
cat > $TMPC << EOF
#include <linux/magic.h>
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
linux_magic_h=yes
fi
########################################
# check whether we can disable warning option with a pragma (this is needed
# to silence warnings in the headers of some versions of external libraries).
# This test has to be compiled with -Werror as otherwise an unknown pragma is
# only a warning.
#
# If we can't selectively disable warning in the code, disable -Werror so that
# the build doesn't fail anyway.
pragma_disable_unused_but_set=no
cat > $TMPC << EOF
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wstrict-prototypes"
#pragma GCC diagnostic pop
int main(void) {
return 0;
}
EOF
if compile_prog "-Werror" "" ; then
pragma_diagnostic_available=yes
else
werror=no
fi
########################################
# check if we have valgrind/valgrind.h
valgrind_h=no
cat > $TMPC << EOF
#include <valgrind/valgrind.h>
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
valgrind_h=yes
fi
########################################
# check if environ is declared
has_environ=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void) {
environ = 0;
return 0;
}
EOF
if compile_prog "" "" ; then
has_environ=yes
fi
########################################
# check if cpuid.h is usable.
cat > $TMPC << EOF
#include <cpuid.h>
int main(void) {
unsigned a, b, c, d;
int max = __get_cpuid_max(0, 0);
if (max >= 1) {
__cpuid(1, a, b, c, d);
}
if (max >= 7) {
__cpuid_count(7, 0, a, b, c, d);
}
return 0;
}
EOF
if compile_prog "" "" ; then
cpuid_h=yes
fi
##########################################
# avx2 optimization requirement check
#
# There is no point enabling this if cpuid.h is not usable,
# since we won't be able to select the new routines.
if test "$cpuid_h" = "yes" && test "$avx2_opt" != "no"; then
cat > $TMPC << EOF
#pragma GCC push_options
#pragma GCC target("avx2")
#include <cpuid.h>
#include <immintrin.h>
static int bar(void *a) {
__m256i x = *(__m256i *)a;
return _mm256_testz_si256(x, x);
}
int main(int argc, char *argv[]) { return bar(argv[0]); }
EOF
if compile_object "" ; then
avx2_opt="yes"
else
avx2_opt="no"
fi
fi
##########################################
# avx512f optimization requirement check
#
# There is no point enabling this if cpuid.h is not usable,
# since we won't be able to select the new routines.
# by default, it is turned off.
# if user explicitly want to enable it, check environment
if test "$cpuid_h" = "yes" && test "$avx512f_opt" = "yes"; then
cat > $TMPC << EOF
#pragma GCC push_options
#pragma GCC target("avx512f")
#include <cpuid.h>
#include <immintrin.h>
static int bar(void *a) {
__m512i x = *(__m512i *)a;
return _mm512_test_epi64_mask(x, x);
}
int main(int argc, char *argv[])
{
return bar(argv[0]);
}
EOF
if ! compile_object "" ; then
avx512f_opt="no"
fi
else
avx512f_opt="no"
fi
########################################
# check if __[u]int128_t is usable.
int128=no
cat > $TMPC << EOF
__int128_t a;
__uint128_t b;
int main (void) {
a = a + b;
b = a * b;
a = a * a;
return 0;
}
EOF
if compile_prog "" "" ; then
int128=yes
fi
#########################################
# See if 128-bit atomic operations are supported.
atomic128=no
if test "$int128" = "yes"; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
y = __atomic_load_16(&x, 0);
__atomic_store_16(&x, y, 0);
__atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
atomic128=yes
fi
fi
cmpxchg128=no
if test "$int128" = yes && test "$atomic128" = no; then
cat > $TMPC << EOF
int main(void)
{
unsigned __int128 x = 0, y = 0;
__sync_val_compare_and_swap_16(&x, y, x);
return 0;
}
EOF
if compile_prog "" "" ; then
cmpxchg128=yes
fi
fi
#########################################
# See if 64-bit atomic operations are supported.
# Note that without __atomic builtins, we can only
# assume atomic loads/stores max at pointer size.
cat > $TMPC << EOF
#include <stdint.h>
int main(void)
{
uint64_t x = 0, y = 0;
#ifdef __ATOMIC_RELAXED
y = __atomic_load_8(&x, 0);
__atomic_store_8(&x, y, 0);
__atomic_compare_exchange_8(&x, &y, x, 0, 0, 0);
__atomic_exchange_8(&x, y, 0);
__atomic_fetch_add_8(&x, y, 0);
#else
typedef char is_host64[sizeof(void *) >= sizeof(uint64_t) ? 1 : -1];
__sync_lock_test_and_set(&x, y);
__sync_val_compare_and_swap(&x, y, 0);
__sync_fetch_and_add(&x, y);
#endif
return 0;
}
EOF
if compile_prog "" "" ; then
atomic64=yes
fi
#########################################
# See if --dynamic-list is supported by the linker
ld_dynamic_list="no"
if test "$static" = "no" ; then
cat > $TMPTXT <<EOF
{
foo;
};
EOF
cat > $TMPC <<EOF
#include <stdio.h>
void foo(void);
void foo(void)
{
printf("foo\n");
}
int main(void)
{
foo();
return 0;
}
EOF
if compile_prog "" "-Wl,--dynamic-list=$TMPTXT" ; then
ld_dynamic_list="yes"
fi
fi
#########################################
# See if -exported_symbols_list is supported by the linker
ld_exported_symbols_list="no"
if test "$static" = "no" ; then
cat > $TMPTXT <<EOF
_foo
EOF
if compile_prog "" "-Wl,-exported_symbols_list,$TMPTXT" ; then
ld_exported_symbols_list="yes"
fi
fi
if test "$plugins" = "yes" &&
test "$ld_dynamic_list" = "no" &&
test "$ld_exported_symbols_list" = "no" ; then
error_exit \
"Plugin support requires dynamic linking and specifying a set of symbols " \
"that are exported to plugins. Unfortunately your linker doesn't " \
"support the flag (--dynamic-list or -exported_symbols_list) used " \
"for this purpose. You can't build with --static."
fi
########################################
# See if __attribute__((alias)) is supported.
# This false for Xcode 9, but has been remedied for Xcode 10.
# Unfortunately, travis uses Xcode 9 by default.
attralias=no
cat > $TMPC << EOF
int x = 1;
extern const int y __attribute__((alias("x")));
int main(void) { return 0; }
EOF
if compile_prog "" "" ; then
attralias=yes
fi
########################################
# check if getauxval is available.
getauxval=no
cat > $TMPC << EOF
#include <sys/auxv.h>
int main(void) {
return getauxval(AT_HWCAP) == 0;
}
EOF
if compile_prog "" "" ; then
getauxval=yes
fi
########################################
# check if ccache is interfering with
# semantic analysis of macros
unset CCACHE_CPP2
ccache_cpp2=no
cat > $TMPC << EOF
static const int Z = 1;
#define fn() ({ Z; })
#define TAUT(X) ((X) == Z)
#define PAREN(X, Y) (X == Y)
#define ID(X) (X)
int main(int argc, char *argv[])
{
int x = 0, y = 0;
x = ID(x);
x = fn();
fn();
if (PAREN(x, y)) return 0;
if (TAUT(Z)) return 0;
return 0;
}
EOF
if ! compile_object "-Werror"; then
ccache_cpp2=yes
fi
#################################################
# clang does not support glibc + FORTIFY_SOURCE.
if test "$fortify_source" != "no"; then
if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
fortify_source="no";
elif test -n "$cxx" && has $cxx &&
echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
fortify_source="no";
else
fortify_source="yes"
fi
fi
###############################################
# Check if copy_file_range is provided by glibc
have_copy_file_range=no
cat > $TMPC << EOF
#include <unistd.h>
int main(void) {
copy_file_range(0, NULL, 0, NULL, 0, 0);
return 0;
}
EOF
if compile_prog "" "" ; then
have_copy_file_range=yes
fi
##########################################
# check if struct fsxattr is available via linux/fs.h
have_fsxattr=no
cat > $TMPC << EOF
#include <linux/fs.h>
struct fsxattr foo;
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
have_fsxattr=yes
fi
##########################################
# check for usable membarrier system call
if test "$membarrier" = "yes"; then
have_membarrier=no
if test "$mingw32" = "yes" ; then
have_membarrier=yes
elif test "$linux" = "yes" ; then
cat > $TMPC << EOF
#include <linux/membarrier.h>
#include <sys/syscall.h>
#include <unistd.h>
#include <stdlib.h>
int main(void) {
syscall(__NR_membarrier, MEMBARRIER_CMD_QUERY, 0);
syscall(__NR_membarrier, MEMBARRIER_CMD_SHARED, 0);
exit(0);
}
EOF
if compile_prog "" "" ; then
have_membarrier=yes
fi
fi
if test "$have_membarrier" = "no"; then
feature_not_found "membarrier" "membarrier system call not available"
fi
else
# Do not enable it by default even for Mingw32, because it doesn't
# work on Wine.
membarrier=no
fi
linux-user pull request for June 2016 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAV1gdMrRIkN7ePJvAAQhLcg/+Kby99taEuewItrA1yDs75jxOlLqaJopd cVzo4LFRFPhIn4UEKqRQS0CGoIeU/DYOmObvuUzJxs2LyUoHoqmQOwEm5obC2a85 JrHo/NOppYBbyvvIEAAXzZDCZo0KZKVclrlT+AX5obpOSNSvAnKvEuLWq1aQ9WGN n4AzHuFEl885cd4nFd8VK/xth89bqz6U/z8CjgIuw3mczp1XNrK5IJJwAy5epHay GCBr9XHooW3SU971WS20RTRS0D33tKPHgCU3ZeZ3rKh4g3JNj6/ixdVgzi9NqFsQ 5DzAj/iBGhN1LtCOednRS6tUt32Bhy8G/g4O3GiXdejagAmNe2wz31cveNJ8S3W5 DK8SZAnJlz06zN5uIpOVQgDOqfXZkCp7ndq779QJoHOAnuOjJBcUbhw1myz2R3eR 6208tStWl3R0+ATEK8CZ7ejg1cUHvdzyqGJA+1nC2HaFUrBWipxN8jf2fz9vO/wG G7zNbahvVgyJWO7bPNK4mxkb6qkWCETnCnLJsq2ZbmtPEMcINjD8vNWLNvFGVG8b 2HbinDrzh0Z9Zik5gLZfiVyP5HFaWSrJn9QRVIgaUjuIH9n3/25sl9OvW/JLjxJ+ h2P17CLnAK6dhUYc4R3wQTx2X/N2FvO4DD8iMYOcgDY6fhZ2b6EEyE9yBgQrIDbF gU1AlC/CX+M= =AXqa -----END PGP SIGNATURE----- Merge remote-tracking branch 'remotes/riku/tags/pull-linux-user-20160608' into staging linux-user pull request for June 2016 # gpg: Signature made Wed 08 Jun 2016 14:27:14 BST # gpg: using RSA key 0xB44890DEDE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" * remotes/riku/tags/pull-linux-user-20160608: (44 commits) linux-user: In fork_end(), remove correct CPUs from CPU list linux-user: Special-case ERESTARTSYS in target_strerror() linux-user: Make target_strerror() return 'const char *' linux-user: Correct signedness of target_flock l_start and l_len fields linux-user: Use safe_syscall wrapper for ioctl linux-user: Use safe_syscall wrapper for accept and accept4 syscalls linux-user: Use safe_syscall wrapper for semop linux-user: Use safe_syscall wrapper for epoll_wait syscalls linux-user: Use safe_syscall wrapper for poll and ppoll syscalls linux-user: Use safe_syscall wrapper for sleep syscalls linux-user: Use safe_syscall wrapper for rt_sigtimedwait syscall linux-user: Use safe_syscall wrapper for flock linux-user: Use safe_syscall wrapper for mq_timedsend and mq_timedreceive linux-user: Use safe_syscall wrapper for msgsnd and msgrcv linux-user: Use safe_syscall wrapper for send* and recv* syscalls linux-user: Use safe_syscall wrapper for connect syscall linux-user: Use safe_syscall wrapper for readv and writev syscalls linux-user: Fix error conversion in 64-bit fadvise syscall linux-user: Fix NR_fadvise64 and NR_fadvise64_64 for 32-bit guests linux-user: Fix handling of arm_fadvise64_64 syscall ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: configure scripts/qemu-binfmt-conf.sh
2016-06-08 19:34:32 +02:00
##########################################
# check if rtnetlink.h exists and is useful
have_rtnetlink=no
cat > $TMPC << EOF
#include <linux/rtnetlink.h>
int main(void) {
return IFLA_PROTO_DOWN;
}
EOF
if compile_prog "" "" ; then
have_rtnetlink=yes
fi
##########################################
# check for usable AF_VSOCK environment
have_af_vsock=no
cat > $TMPC << EOF
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#if !defined(AF_VSOCK)
# error missing AF_VSOCK flag
#endif
#include <linux/vm_sockets.h>
int main(void) {
int sock, ret;
struct sockaddr_vm svm;
socklen_t len = sizeof(svm);
sock = socket(AF_VSOCK, SOCK_STREAM, 0);
ret = getpeername(sock, (struct sockaddr *)&svm, &len);
if ((ret == -1) && (errno == ENOTCONN)) {
return 0;
}
return -1;
}
EOF
if compile_prog "" "" ; then
have_af_vsock=yes
fi
##########################################
# check for usable AF_ALG environment
have_afalg=no
cat > $TMPC << EOF
#include <errno.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <linux/if_alg.h>
int main(void) {
int sock;
sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
return sock;
}
EOF
if compile_prog "" "" ; then
have_afalg=yes
fi
if test "$crypto_afalg" = "yes"
then
if test "$have_afalg" != "yes"
then
error_exit "AF_ALG requested but could not be detected"
fi
fi
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
#################################################
# Check to see if we have the Hypervisor framework
if [ "$darwin" = "yes" ] ; then
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
cat > $TMPC << EOF
#include <Hypervisor/hv.h>
int main() { return 0;}
EOF
if ! compile_object ""; then
hvf='no'
else
hvf='yes'
QEMU_LDFLAGS="-framework Hypervisor $QEMU_LDFLAGS"
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
fi
fi
#################################################
# Sparc implicitly links with --relax, which is
# incompatible with -r, so --no-relax should be
# given. It does no harm to give it on other
# platforms too.
# Note: the prototype is needed since QEMU_CFLAGS
# contains -Wmissing-prototypes
cat > $TMPC << EOF
extern int foo(void);
int foo(void) { return 0; }
EOF
if ! compile_object ""; then
error_exit "Failed to compile object file for LD_REL_FLAGS test"
fi
for i in '-Wl,-r -Wl,--no-relax' -Wl,-r -r; do
if do_cc -nostdlib $i -o $TMPMO $TMPO; then
LD_REL_FLAGS=$i
break
fi
done
if test "$modules" = "yes" && test "$LD_REL_FLAGS" = ""; then
feature_not_found "modules" "Cannot find how to build relocatable objects"
fi
##########################################
# check for sysmacros.h
have_sysmacros=no
cat > $TMPC << EOF
#include <sys/sysmacros.h>
int main(void) {
return makedev(0, 0);
}
EOF
if compile_prog "" "" ; then
have_sysmacros=yes
fi
##########################################
# Veritas HyperScale block driver VxHS
# Check if libvxhs is installed
if test "$vxhs" != "no" ; then
cat > $TMPC <<EOF
#include <stdint.h>
#include <qnio/qnio_api.h>
void *vxhs_callback;
int main(void) {
iio_init(QNIO_VERSION, vxhs_callback);
return 0;
}
EOF
vxhs_libs="-lvxhs -lssl"
if compile_prog "" "$vxhs_libs" ; then
vxhs=yes
else
if test "$vxhs" = "yes" ; then
feature_not_found "vxhs block device" "Install libvxhs See github"
fi
vxhs=no
fi
fi
use _Static_assert in QEMU_BUILD_BUG_ON QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it, to provide more readable messages on failure. We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT is defined, and reverts to the old way otherwise. That way, systems without C11 conforming compiler will still have the old messages, as verified by intentionally breaking the configure check. the following example output was generated by inverting the condition in QEMU_BUILD_BUG_ON: without _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’ > struct { \ > ^ > /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’ > #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \ > ^~~~~~~~~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ with _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)" > #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x) > ^ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ Signed-off-by: Andreas Grapentin <andreas@grapentin.org> Message-Id: <20170314165953.18506-1-andreas@grapentin.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14 17:59:53 +01:00
##########################################
# check for _Static_assert()
have_static_assert=no
cat > $TMPC << EOF
_Static_assert(1, "success");
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
have_static_assert=yes
fi
##########################################
# check for utmpx.h, it is missing e.g. on OpenBSD
have_utmpx=no
cat > $TMPC << EOF
#include <utmpx.h>
struct utmpx user_info;
int main(void) {
return 0;
}
EOF
if compile_prog "" "" ; then
have_utmpx=yes
fi
##########################################
# check for getrandom()
have_getrandom=no
cat > $TMPC << EOF
#include <sys/random.h>
int main(void) {
return getrandom(0, 0, GRND_NONBLOCK);
}
EOF
if compile_prog "" "" ; then
have_getrandom=yes
fi
##########################################
# checks for sanitizers
have_asan=no
have_ubsan=no
have_asan_iface_h=no
have_asan_iface_fiber=no
if test "$sanitizers" = "yes" ; then
write_c_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then
have_asan=yes
fi
# we could use a simple skeleton for flags checks, but this also
# detect the static linking issue of ubsan, see also:
# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285
cat > $TMPC << EOF
#include <stdlib.h>
int main(void) {
void *tmp = malloc(10);
return *(int *)(tmp + 2);
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then
have_ubsan=yes
fi
if check_include "sanitizer/asan_interface.h" ; then
have_asan_iface_h=yes
fi
cat > $TMPC << EOF
#include <sanitizer/asan_interface.h>
int main(void) {
__sanitizer_start_switch_fiber(0, 0, 0);
return 0;
}
EOF
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then
have_asan_iface_fiber=yes
fi
fi
##########################################
# checks for fuzzer
if test "$fuzzing" = "yes" ; then
write_c_fuzzer_skeleton
if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address,fuzzer" ""; then
have_fuzzer=yes
fi
fi
##########################################
# check for libpmem
if test "$libpmem" != "no"; then
if $pkg_config --exists "libpmem"; then
libpmem="yes"
libpmem_libs=$($pkg_config --libs libpmem)
libpmem_cflags=$($pkg_config --cflags libpmem)
libs_softmmu="$libs_softmmu $libpmem_libs"
QEMU_CFLAGS="$QEMU_CFLAGS $libpmem_cflags"
else
if test "$libpmem" = "yes" ; then
feature_not_found "libpmem" "Install nvml or pmdk"
fi
libpmem="no"
fi
fi
##########################################
# check for slirp
# slirp is only required when building softmmu targets
if test -z "$slirp" -a "$softmmu" != "yes" ; then
slirp="no"
fi
case "$slirp" in
"" | yes)
if $pkg_config slirp; then
slirp=system
elif test -e "${source_path}/.git" && test $git_update = 'yes' ; then
slirp=git
elif test -e "${source_path}/slirp/Makefile" ; then
slirp=internal
elif test -z "$slirp" ; then
slirp=no
else
feature_not_found "slirp" "Install slirp devel or git submodule"
fi
;;
system)
if ! $pkg_config slirp; then
feature_not_found "slirp" "Install slirp devel"
fi
;;
esac
case "$slirp" in
git | internal)
if test "$slirp" = git; then
git_submodules="${git_submodules} slirp"
fi
mkdir -p slirp
slirp_cflags="-I\$(SRC_PATH)/slirp/src -I\$(BUILD_DIR)/slirp/src"
slirp_libs="-L\$(BUILD_DIR)/slirp -lslirp"
if test "$mingw32" = "yes" ; then
slirp_libs="$slirp_libs -lws2_32 -liphlpapi"
fi
;;
system)
slirp_version=$($pkg_config --modversion slirp 2>/dev/null)
slirp_cflags=$($pkg_config --cflags slirp 2>/dev/null)
slirp_libs=$($pkg_config --libs slirp 2>/dev/null)
;;
no)
;;
*)
error_exit "Unknown state for slirp: $slirp"
;;
esac
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
write_c_skeleton
if test "$gcov" = "yes" ; then
QEMU_CFLAGS="-fprofile-arcs -ftest-coverage -g $QEMU_CFLAGS"
QEMU_LDFLAGS="-fprofile-arcs -ftest-coverage $QEMU_LDFLAGS"
elif test "$fortify_source" = "yes" ; then
CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
elif test "$debug" = "no"; then
CFLAGS="-O2 $CFLAGS"
fi
if test "$have_asan" = "yes"; then
QEMU_CFLAGS="-fsanitize=address $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=address $QEMU_LDFLAGS"
if test "$have_asan_iface_h" = "no" ; then
echo "ASAN build enabled, but ASAN header missing." \
"Without code annotation, the report may be inferior."
elif test "$have_asan_iface_fiber" = "no" ; then
echo "ASAN build enabled, but ASAN header is too old." \
"Without code annotation, the report may be inferior."
fi
fi
if test "$have_ubsan" = "yes"; then
QEMU_CFLAGS="-fsanitize=undefined $QEMU_CFLAGS"
QEMU_LDFLAGS="-fsanitize=undefined $QEMU_LDFLAGS"
fi
##########################################
# Do we have libnfs
if test "$libnfs" != "no" ; then
if $pkg_config --atleast-version=1.9.3 libnfs; then
libnfs="yes"
libnfs_libs=$($pkg_config --libs libnfs)
else
if test "$libnfs" = "yes" ; then
feature_not_found "libnfs" "Install libnfs devel >= 1.9.3"
fi
libnfs="no"
fi
fi
##########################################
# Do we have libudev
if test "$libudev" != "no" ; then
if $pkg_config libudev && test "$static" != "yes"; then
libudev="yes"
libudev_libs=$($pkg_config --libs libudev)
else
libudev="no"
fi
fi
# Now we've finished running tests it's OK to add -Werror to the compiler flags
if test "$werror" = "yes"; then
QEMU_CFLAGS="-Werror $QEMU_CFLAGS"
fi
if test "$solaris" = "no" ; then
if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
QEMU_LDFLAGS="-Wl,--warn-common $QEMU_LDFLAGS"
fi
fi
# test if pod2man has --utf8 option
if pod2man --help | grep -q utf8; then
POD2MAN="pod2man --utf8"
else
POD2MAN="pod2man"
fi
# Use ASLR, no-SEH and DEP if available
if test "$mingw32" = "yes" ; then
for flag in --dynamicbase --no-seh --nxcompat; do
if ld_has $flag ; then
QEMU_LDFLAGS="-Wl,$flag $QEMU_LDFLAGS"
fi
done
fi
configure: Disable W^X on OpenBSD Since OpenBSD 6.0 [1], W^X is enforced by default [2]. TCG requires WX access. Disable W^X if it is available. This fixes: # lm32-softmmu/qemu-system-lm32 Could not allocate dynamic translator buffer # sysctl kern.wxabort=1 kern.wxabort: 0 -> 1 # lm32-softmmu/qemu-system-lm32 mmap: Not supported Abort trap (core dumped) # gdb -q lm32-softmmu/qemu-system-lm32 qemu-system-lm32.core (gdb) bt #0 0x000017e3c156c50a in _thread_sys___syscall () at {standard input}:5 #1 0x000017e3c15e5d7a in *_libc_mmap (addr=Variable "addr" is not available.) at /usr/src/lib/libc/sys/mmap.c:47 #2 0x000017e17d9abc8b in alloc_code_gen_buffer () at /usr/src/qemu/accel/tcg/translate-all.c:1064 #3 0x000017e17d9abd04 in code_gen_alloc (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1112 #4 0x000017e17d9abe81 in tcg_exec_init (tb_size=0) at /usr/src/qemu/accel/tcg/translate-all.c:1149 #5 0x000017e17d9897e9 in tcg_init (ms=0x17e45e456800) at /usr/src/qemu/accel/tcg/tcg-all.c:66 #6 0x000017e17d9891b8 in accel_init_machine (acc=0x17e3c3f50800, ms=0x17e45e456800) at /usr/src/qemu/accel/accel.c:63 #7 0x000017e17d989312 in configure_accelerator (ms=0x17e45e456800, progname=0x7f7fffff07b0 "lm32-softmmu/qemu-system-lm32") at /usr/src/qemu/accel/accel.c:111 #8 0x000017e17d9d8616 in main (argc=1, argv=0x7f7fffff06b8, envp=0x7f7fffff06c8) at vl.c:4325 [1] https://www.openbsd.org/faq/upgrade60.html [2] https://undeadly.org/cgi?action=article&sid=20160527203200 Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190307142822.8531-3-philmd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07 15:28:22 +01:00
# Disable OpenBSD W^X if available
if test "$tcg" = "yes" && test "$targetos" = "OpenBSD"; then
cat > $TMPC <<EOF
int main(void) { return 0; }
EOF
wx_ldflags="-Wl,-z,wxneeded"
if compile_prog "" "$wx_ldflags"; then
QEMU_LDFLAGS="$QEMU_LDFLAGS $wx_ldflags"
fi
fi
qemu_confdir=$sysconfdir$confsuffix
qemu_moddir=$libdir$confsuffix
qemu_datadir=$datadir$confsuffix
qemu_localedir="$datadir/locale"
qemu_icondir="$datadir/icons"
qemu_desktopdir="$datadir/applications"
# We can only support ivshmem if we have eventfd
if [ "$eventfd" = "yes" ]; then
ivshmem=yes
fi
tools=""
if test "$want_tools" = "yes" ; then
tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) qemu-edid\$(EXESUF) $tools"
if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
tools="qemu-nbd\$(EXESUF) qemu-storage-daemon\$(EXESUF) $tools"
fi
if [ "$ivshmem" = "yes" ]; then
tools="ivshmem-client\$(EXESUF) ivshmem-server\$(EXESUF) $tools"
fi
if [ "$curl" = "yes" ]; then
tools="elf2dmp\$(EXESUF) $tools"
fi
fi
if test "$softmmu" = yes ; then
if test "$linux" = yes; then
if test "$virtfs" != no && test "$cap_ng" = yes && test "$attr" = yes ; then
virtfs=yes
tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
else
if test "$virtfs" = yes; then
error_exit "VirtFS requires libcap-ng devel and libattr devel"
fi
virtfs=no
fi
if test "$mpath" != no && test "$mpathpersist" = yes ; then
mpath=yes
else
if test "$mpath" = yes; then
error_exit "Multipath requires libmpathpersist devel"
fi
mpath=no
fi
tools="$tools scsi/qemu-pr-helper\$(EXESUF)"
else
if test "$virtfs" = yes; then
error_exit "VirtFS is supported only on Linux"
fi
virtfs=no
if test "$mpath" = yes; then
error_exit "Multipath is supported only on Linux"
fi
mpath=no
fi
if test "$xkbcommon" = "yes"; then
tools="qemu-keymap\$(EXESUF) $tools"
fi
fi
# Probe for guest agent support/options
if [ "$guest_agent" != "no" ]; then
if [ "$softmmu" = no -a "$want_tools" = no ] ; then
guest_agent=no
elif [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
tools="qemu-ga\$(EXESUF) $tools"
guest_agent=yes
elif [ "$guest_agent" != yes ]; then
guest_agent=no
else
error_exit "Guest agent is not supported on this platform"
fi
fi
# Guest agent Window MSI package
if test "$guest_agent" != yes; then
if test "$guest_agent_msi" = yes; then
error_exit "MSI guest agent package requires guest agent enabled"
fi
guest_agent_msi=no
elif test "$mingw32" != "yes"; then
if test "$guest_agent_msi" = "yes"; then
error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
fi
guest_agent_msi=no
elif ! has wixl; then
if test "$guest_agent_msi" = "yes"; then
error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
fi
guest_agent_msi=no
else
# we support qemu-ga, mingw32, and wixl: default to MSI enabled if it wasn't
# disabled explicitly
if test "$guest_agent_msi" != "no"; then
guest_agent_msi=yes
fi
fi
if test "$guest_agent_msi" = "yes"; then
if test "$guest_agent_with_vss" = "yes"; then
QEMU_GA_MSI_WITH_VSS="-D InstallVss"
fi
if test "$QEMU_GA_MANUFACTURER" = ""; then
QEMU_GA_MANUFACTURER=QEMU
fi
if test "$QEMU_GA_DISTRO" = ""; then
QEMU_GA_DISTRO=Linux
fi
if test "$QEMU_GA_VERSION" = ""; then
QEMU_GA_VERSION=$(cat $source_path/VERSION)
fi
QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=$($pkg_config --variable=prefix glib-2.0)/bin"
case "$cpu" in
x86_64)
QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
;;
i386)
QEMU_GA_MSI_ARCH="-D Arch=32"
;;
*)
error_exit "CPU $cpu not supported for building installation package"
;;
esac
fi
# Mac OS X ships with a broken assembler
roms=
if { test "$cpu" = "i386" || test "$cpu" = "x86_64"; } && \
test "$targetos" != "Darwin" && test "$targetos" != "SunOS" && \
test "$softmmu" = yes ; then
# Different host OS linkers have different ideas about the name of the ELF
# emulation. Linux and OpenBSD/amd64 use 'elf_i386'; FreeBSD uses the _fbsd
# variant; OpenBSD/i386 uses the _obsd variant; and Windows uses i386pe.
for emu in elf_i386 elf_i386_fbsd elf_i386_obsd i386pe; do
if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
ld_i386_emulation="$emu"
roms="optionrom"
break
fi
done
fi
# Only build s390-ccw bios if we're on s390x and the compiler has -march=z900
if test "$cpu" = "s390x" ; then
write_c_skeleton
if compile_prog "-march=z900" ""; then
roms="$roms s390-ccw"
fi
fi
# Check that the C++ compiler exists and works with the C compiler.
# All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to don't miss any other that could be added.
if has $cxx; then
cat > $TMPC <<EOF
int c_function(void);
int main(void) { return c_function(); }
EOF
compile_object
cat > $TMPCXX <<EOF
extern "C" {
int c_function(void);
}
int c_function(void) { return 42; }
EOF
update_cxxflags
if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $QEMU_LDFLAGS; then
# C++ compiler $cxx works ok with C compiler $cc
:
else
echo "C++ compiler $cxx does not work with C compiler $cc"
echo "Disabling C++ specific optional code"
cxx=
fi
else
echo "No C++ compiler available; disabling C++ specific optional code"
cxx=
fi
echo_version() {
if test "$1" = "yes" ; then
echo "($2)"
fi
}
# prepend pixman and ftd flags after all config tests are done
QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
configure: Really use local libfdt if the system one is too old QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-04-16 01:05:19 +02:00
QEMU_LDFLAGS="$fdt_ldflags $QEMU_LDFLAGS"
libs_softmmu="$pixman_libs $libs_softmmu"
echo "Install prefix $prefix"
echo "BIOS directory $(eval echo $qemu_datadir)"
echo "firmware path $(eval echo $firmwarepath)"
echo "binary directory $(eval echo $bindir)"
echo "library directory $(eval echo $libdir)"
echo "module directory $(eval echo $qemu_moddir)"
echo "libexec directory $(eval echo $libexecdir)"
echo "include directory $(eval echo $includedir)"
echo "config directory $(eval echo $sysconfdir)"
if test "$mingw32" = "no" ; then
echo "local state directory $(eval echo $local_statedir)"
echo "Manual directory $(eval echo $mandir)"
echo "ELF interp prefix $interp_prefix"
else
echo "local state directory queried at runtime"
echo "Windows SDK $win_sdk"
fi
echo "Build directory $(pwd)"
echo "Source path $source_path"
echo "GIT binary $git"
echo "GIT submodules $git_submodules"
echo "C compiler $cc"
echo "Host C compiler $host_cc"
echo "C++ compiler $cxx"
echo "Objective-C compiler $objcc"
echo "ARFLAGS $ARFLAGS"
echo "CFLAGS $CFLAGS"
echo "QEMU_CFLAGS $QEMU_CFLAGS"
configure: Really use local libfdt if the system one is too old QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-04-16 01:05:19 +02:00
echo "QEMU_LDFLAGS $QEMU_LDFLAGS"
echo "make $make"
echo "install $install"
echo "python $python ($python_version)"
if test "$docs" != "no"; then
echo "sphinx-build $sphinx_build"
fi
echo "genisoimage $genisoimage"
echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
if test "$slirp" != "no" ; then
echo "smbd $smbd"
fi
echo "module support $modules"
echo "alt path mod load $module_upgrades"
echo "host CPU $cpu"
echo "host big endian $bigendian"
echo "target list $target_list"
echo "gprof enabled $gprof"
echo "sparse enabled $sparse"
echo "strip binaries $strip_opt"
echo "profiler $profiler"
echo "static build $static"
if test "$darwin" = "yes" ; then
echo "Cocoa support $cocoa"
fi
echo "SDL support $sdl $(echo_version $sdl $sdlversion)"
echo "SDL image support $sdl_image"
echo "GTK support $gtk $(echo_version $gtk $gtk_version)"
echo "GTK GL support $gtk_gl"
echo "VTE support $vte $(echo_version $vte $vteversion)"
echo "TLS priority $tls_priority"
echo "GNUTLS support $gnutls"
echo "libgcrypt $gcrypt"
if test "$gcrypt" = "yes"
then
echo " hmac $gcrypt_hmac"
echo " XTS $gcrypt_xts"
fi
echo "nettle $nettle $(echo_version $nettle $nettle_version)"
if test "$nettle" = "yes"
then
echo " XTS $nettle_xts"
fi
echo "libtasn1 $tasn1"
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
echo "PAM $auth_pam"
echo "iconv support $iconv"
echo "curses support $curses"
echo "virgl support $virglrenderer $(echo_version $virglrenderer $virgl_version)"
echo "curl support $curl"
echo "mingw32 support $mingw32"
echo "Audio drivers $audio_drv_list"
echo "Block whitelist (rw) $block_drv_rw_whitelist"
echo "Block whitelist (ro) $block_drv_ro_whitelist"
echo "VirtFS support $virtfs"
echo "Multipath support $mpath"
echo "VNC support $vnc"
if test "$vnc" = "yes" ; then
echo "VNC SASL support $vnc_sasl"
echo "VNC JPEG support $vnc_jpeg"
echo "VNC PNG support $vnc_png"
fi
echo "xen support $xen"
if test "$xen" = "yes" ; then
echo "xen ctrl version $xen_ctrl_version"
fi
echo "brlapi support $brlapi"
echo "Documentation $docs"
echo "PIE $pie"
echo "vde support $vde"
echo "netmap support $netmap"
echo "Linux AIO support $linux_aio"
echo "Linux io_uring support $linux_io_uring"
echo "ATTR/XATTR support $attr"
echo "Install blobs $blobs"
echo "KVM support $kvm"
echo "HAX support $hax"
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
echo "HVF support $hvf"
echo "WHPX support $whpx"
echo "TCG support $tcg"
if test "$tcg" = "yes" ; then
echo "TCG debug enabled $debug_tcg"
echo "TCG interpreter $tcg_interpreter"
fi
echo "malloc trim support $malloc_trim"
echo "RDMA support $rdma"
echo "PVRDMA support $pvrdma"
echo "fdt support $fdt"
echo "membarrier $membarrier"
echo "preadv support $preadv"
echo "fdatasync $fdatasync"
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
echo "madvise $madvise"
echo "posix_madvise $posix_madvise"
echo "posix_memalign $posix_memalign"
echo "libcap-ng support $cap_ng"
echo "vhost-net support $vhost_net"
echo "vhost-crypto support $vhost_crypto"
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
echo "vhost-scsi support $vhost_scsi"
echo "vhost-vsock support $vhost_vsock"
echo "vhost-user support $vhost_user"
echo "vhost-user-fs support $vhost_user_fs"
echo "Trace backends $trace_backends"
if have_backend "simple"; then
echo "Trace output file $trace_file-<pid>"
fi
echo "spice support $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
echo "rbd support $rbd"
echo "xfsctl support $xfs"
echo "smartcard support $smartcard"
echo "libusb $libusb"
echo "usb net redir $usb_redir"
echo "OpenGL support $opengl"
echo "OpenGL dmabufs $opengl_dmabuf"
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
echo "libiscsi support $libiscsi"
echo "libnfs support $libnfs"
echo "build guest agent $guest_agent"
echo "QGA VSS support $guest_agent_with_vss"
echo "QGA w32 disk info $guest_agent_ntddscsi"
echo "QGA MSI support $guest_agent_msi"
echo "seccomp support $seccomp"
echo "coroutine backend $coroutine"
echo "coroutine pool $coroutine_pool"
echo "debug stack usage $debug_stack_usage"
echo "mutex debugging $debug_mutex"
echo "crypto afalg $crypto_afalg"
echo "GlusterFS support $glusterfs"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
echo "libssh support $libssh"
echo "QOM debugging $qom_cast_debug"
echo "Live block migration $live_block_migration"
echo "lzo support $lzo"
echo "snappy support $snappy"
echo "bzip2 support $bzip2"
echo "lzfse support $lzfse"
echo "zstd support $zstd"
echo "NUMA host support $numa"
echo "libxml2 $libxml2"
echo "tcmalloc support $tcmalloc"
configure: Add support for jemalloc This adds "--enable-jemalloc" and "--disable-jemalloc" to allow linking to jemalloc memory allocator. We have already tcmalloc support, but it seem to not working well with a lot of iothreads/disks. The main problem is that tcmalloc use a shared thread cache of 16MB by default. With more threads, this cache is shared, and some bad garbage collections can occur if the cache is too low. It's possible to tcmalloc cache increase it with a env var: TCMALLOC_MAX_TOTAL_THREAD_CACHE_BYTES=256MB With default 16MB, performances are really bad with more than 2 disks. Increasing to 256MB, it's helping but still have problem with 16 disks/iothreads. Jemalloc don't have performance problem with default configuration. Here the benchmark results in iops of 1 qemu vm randread 4K iodepth=32, with rbd block backend (librbd is doing a lot of memory allocation), 1 iothread by disk glibc malloc ------------ 1 disk 29052 2 disks 55878 4 disks 127899 8 disks 240566 15 disks 269976 jemalloc -------- 1 disk 41278 2 disks 75781 4 disks 195351 8 disks 294241 15 disks 298199 tcmalloc 2.2.1 default 16M cache -------------------------------- 1 disk 37911 2 disks 67698 4 disks 41076 8 disks 43312 15 disks 37569 tcmalloc : 256M cache --------------------------- 1 disk 33914 2 disks 58839 4 disks 148205 8 disks 213298 15 disks 218383 Signed-off-by: Alexandre Derumier <aderumier@odiso.com> Message-Id: <1434711418-20429-1-git-send-email-aderumier@odiso.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-19 12:56:58 +02:00
echo "jemalloc support $jemalloc"
echo "avx2 optimization $avx2_opt"
echo "avx512f optimization $avx512f_opt"
echo "replication support $replication"
echo "VxHS block device $vxhs"
echo "bochs support $bochs"
echo "cloop support $cloop"
echo "dmg support $dmg"
echo "qcow v1 support $qcow1"
echo "vdi support $vdi"
echo "vvfat support $vvfat"
echo "qed support $qed"
echo "parallels support $parallels"
echo "sheepdog support $sheepdog"
echo "capstone $capstone"
echo "libpmem support $libpmem"
echo "libudev $libudev"
echo "default devices $default_devices"
echo "plugin support $plugins"
echo "fuzzing support $fuzzing"
echo "gdb $gdb_bin"
if test "$supported_cpu" = "no"; then
echo
echo "WARNING: SUPPORT FOR THIS HOST CPU WILL GO AWAY IN FUTURE RELEASES!"
echo
echo "CPU host architecture $cpu support is not currently maintained."
echo "The QEMU project intends to remove support for this host CPU in"
echo "a future release if nobody volunteers to maintain it and to"
echo "provide a build host for our continuous integration setup."
echo "configure has succeeded and you can continue to build, but"
echo "if you care about QEMU on this platform you should contact"
echo "us upstream at qemu-devel@nongnu.org."
fi
if test "$supported_os" = "no"; then
echo
echo "WARNING: SUPPORT FOR THIS HOST OS WILL GO AWAY IN FUTURE RELEASES!"
echo
echo "Host OS $targetos support is not currently maintained."
echo "The QEMU project intends to remove support for this host OS in"
echo "a future release if nobody volunteers to maintain it and to"
echo "provide a build host for our continuous integration setup."
echo "configure has succeeded and you can continue to build, but"
echo "if you care about QEMU on this platform you should contact"
echo "us upstream at qemu-devel@nongnu.org."
fi
config_host_mak="config-host.mak"
echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
echo "# Automatically generated by configure - do not modify" > $config_host_mak
echo >> $config_host_mak
echo all: >> $config_host_mak
echo "prefix=$prefix" >> $config_host_mak
echo "bindir=$bindir" >> $config_host_mak
2011-05-15 11:08:59 +02:00
echo "libdir=$libdir" >> $config_host_mak
echo "libexecdir=$libexecdir" >> $config_host_mak
echo "includedir=$includedir" >> $config_host_mak
echo "mandir=$mandir" >> $config_host_mak
echo "sysconfdir=$sysconfdir" >> $config_host_mak
echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
echo "qemu_firmwarepath=$firmwarepath" >> $config_host_mak
echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
if test "$mingw32" = "no" ; then
echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
fi
echo "qemu_helperdir=$libexecdir" >> $config_host_mak
echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
echo "qemu_icondir=$qemu_icondir" >> $config_host_mak
echo "qemu_desktopdir=$qemu_desktopdir" >> $config_host_mak
echo "libs_cpu=$libs_cpu" >> $config_host_mak
echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
echo "GIT=$git" >> $config_host_mak
echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
build: allow automatic git submodule updates to be disabled Some people building QEMU use VPATH builds where the source directory is on a read-only volume. In such a case 'scripts/git-submodules.sh update' will always fail and users are required to run it manually themselves on their original writable source directory. While this is already supported, it is nice to give users a command line flag to configure to permanently disable automatic submodule updates, as it means they won't get hard to diagnose failures from git-submodules.sh at an arbitrary later date. This patch thus introduces a flag '--disable-git-update' which will prevent 'make' from ever running 'scripts/git-submodules.sh update'. It will still run the 'status' command to determine if a submodule update is needed, but when it does this it'll simply stop and print a message instructing the developer what todo. eg $ ./configure --target-list=x86_64-softmmu --disable-git-update ...snip... $ make GEN config-host.h GEN trace/generated-tcg-tracers.h GEN trace/generated-helpers-wrappers.h GEN trace/generated-helpers.h GEN trace/generated-helpers.c GEN module_block.h GIT submodule checkout is out of date. Please run scripts/git-submodule.sh update ui/keycodemapdb from the source directory checkout /home/berrange/src/virt/qemu make: *** [Makefile:31: git-submodule-update] Error 1 Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-26 14:52:26 +02:00
echo "GIT_UPDATE=$git_update" >> $config_host_mak
echo "ARCH=$ARCH" >> $config_host_mak
if test "$default_devices" = "yes" ; then
echo "CONFIG_MINIKCONF_MODE=--defconfig" >> $config_host_mak
else
echo "CONFIG_MINIKCONF_MODE=--allnoconfig" >> $config_host_mak
fi
if test "$debug_tcg" = "yes" ; then
echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
fi
if test "$strip_opt" = "yes" ; then
echo "STRIP=${strip}" >> $config_host_mak
fi
if test "$bigendian" = "yes" ; then
echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
fi
if test "$mingw32" = "yes" ; then
echo "CONFIG_WIN32=y" >> $config_host_mak
rc_version=$(cat $source_path/VERSION)
version_major=${rc_version%%.*}
rc_version=${rc_version#*.}
version_minor=${rc_version%%.*}
rc_version=${rc_version#*.}
version_subminor=${rc_version%%.*}
version_micro=0
echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
if test "$guest_agent_with_vss" = "yes" ; then
echo "CONFIG_QGA_VSS=y" >> $config_host_mak
echo "QGA_VSS_PROVIDER=$qga_vss_provider" >> $config_host_mak
echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
fi
if test "$guest_agent_ntddscsi" = "yes" ; then
echo "CONFIG_QGA_NTDDSCSI=y" >> $config_host_mak
fi
if test "$guest_agent_msi" = "yes"; then
echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
fi
else
echo "CONFIG_POSIX=y" >> $config_host_mak
fi
if test "$linux" = "yes" ; then
echo "CONFIG_LINUX=y" >> $config_host_mak
fi
if test "$darwin" = "yes" ; then
echo "CONFIG_DARWIN=y" >> $config_host_mak
fi
if test "$solaris" = "yes" ; then
echo "CONFIG_SOLARIS=y" >> $config_host_mak
fi
if test "$haiku" = "yes" ; then
echo "CONFIG_HAIKU=y" >> $config_host_mak
fi
if test "$static" = "yes" ; then
echo "CONFIG_STATIC=y" >> $config_host_mak
fi
if test "$profiler" = "yes" ; then
echo "CONFIG_PROFILER=y" >> $config_host_mak
fi
if test "$want_tools" = "yes" ; then
echo "CONFIG_TOOLS=y" >> $config_host_mak
fi
if test "$slirp" != "no"; then
echo "CONFIG_SLIRP=y" >> $config_host_mak
echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
echo "SLIRP_CFLAGS=$slirp_cflags" >> $config_host_mak
echo "SLIRP_LIBS=$slirp_libs" >> $config_host_mak
fi
if [ "$slirp" = "git" -o "$slirp" = "internal" ]; then
Makefile: Rename targets for make recursion We make a few sub-directories recursively, in particular $(TARGET_DIRS). For goal "all", we do it the nice way: "all" has a prerequisite subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make recursively. Behaves nicely with -j and -k. For other goals such as "clean" and "install", the recipe runs make recursively in a for loop. Ignores -j and -k. The next commit will fix that for "clean" and "install". This commit prepares the ground by renaming the targets we use for "all" to include the goal for the sub-make. This will permit reusing them for goals other than "all". Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename to T/all, and declare phony. Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default goal is "all" for all R. Rename to pc-bios/R/all, and declare phony. The remainder are renamed just for consistency. Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to dtc/all, and declare phony. Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE) in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony. Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and declare phony. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-4-armbru@redhat.com> [Add compatibility gunk to keep make working across the rename]
2019-05-28 10:23:07 +02:00
echo "config-host.h: slirp/all" >> $config_host_mak
fi
if test "$vde" = "yes" ; then
echo "CONFIG_VDE=y" >> $config_host_mak
echo "VDE_LIBS=$vde_libs" >> $config_host_mak
fi
if test "$netmap" = "yes" ; then
echo "CONFIG_NETMAP=y" >> $config_host_mak
fi
if test "$l2tpv3" = "yes" ; then
echo "CONFIG_L2TPV3=y" >> $config_host_mak
fi
if test "$gprof" = "yes" ; then
echo "CONFIG_GPROF=y" >> $config_host_mak
fi
if test "$cap_ng" = "yes" ; then
echo "CONFIG_LIBCAP_NG=y" >> $config_host_mak
fi
echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
for drv in $audio_drv_list; do
def=CONFIG_AUDIO_$(echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]')
case "$drv" in
alsa | oss | pa | sdl)
echo "$def=m" >> $config_host_mak ;;
*)
echo "$def=y" >> $config_host_mak ;;
esac
done
echo "ALSA_LIBS=$alsa_libs" >> $config_host_mak
echo "PULSE_LIBS=$pulse_libs" >> $config_host_mak
echo "COREAUDIO_LIBS=$coreaudio_libs" >> $config_host_mak
echo "DSOUND_LIBS=$dsound_libs" >> $config_host_mak
echo "OSS_LIBS=$oss_libs" >> $config_host_mak
echo "JACK_LIBS=$jack_libs" >> $config_host_mak
if test "$audio_win_int" = "yes" ; then
echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
fi
echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
if test "$vnc" = "yes" ; then
echo "CONFIG_VNC=y" >> $config_host_mak
fi
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
if test "$vnc_sasl" = "yes" ; then
echo "CONFIG_VNC_SASL=y" >> $config_host_mak
Add SASL authentication support ("Daniel P. Berrange") This patch adds the new SASL authentication protocol to the VNC server. It is enabled by setting the 'sasl' flag when launching VNC. SASL can optionally provide encryption via its SSF layer, if a suitable mechanism is configured (eg, GSSAPI/Kerberos, or Digest-MD5). If an SSF layer is not available, then it should be combined with the x509 VNC authentication protocol which provides encryption. eg, if using GSSAPI qemu -vnc localhost:1,sasl eg if using TLS/x509 for encryption qemu -vnc localhost:1,sasl,tls,x509 By default the Cyrus SASL library will look for its configuration in the file /etc/sasl2/qemu.conf. For non-root users, this can be overridden by setting the SASL_CONF_PATH environment variable, eg to make it look in $HOME/.sasl2. NB unprivileged users may not have access to the full range of SASL mechanisms, since some of them require some administrative privileges to configure. The patch includes an example SASL configuration file which illustrates config for GSSAPI and Digest-MD5, though it should be noted that the latter is not really considered secure any more. Most of the SASL authentication code is located in a separate source file, vnc-auth-sasl.c. The main vnc.c file only contains minimal integration glue, specifically parsing of command line flags / setup, and calls to start the SASL auth process, to do encoding/decoding for data. There are several possible stacks for reading & writing of data, depending on the combo of VNC authentication methods in use - Clear. read/write straight to socket - TLS. read/write via GNUTLS helpers - SASL. encode/decode via SASL SSF layer, then read/write to socket - SASL+TLS. encode/decode via SASL SSF layer, then read/write via GNUTLS Hence, the vnc_client_read & vnc_client_write methods have been refactored a little. vnc_client_read: main entry point for reading, calls either - vnc_client_read_plain reading, with no intermediate decoding - vnc_client_read_sasl reading, with SASL SSF decoding These two methods, then call vnc_client_read_buf(). This decides whether to write to the socket directly or write via GNUTLS. The situation is the same for writing data. More extensive comments have been added in the code / patch. The vnc_client_read_sasl and vnc_client_write_sasl method implementations live in the separate vnc-auth-sasl.c file. The state required for the SASL auth mechanism is kept in a separate VncStateSASL struct, defined in vnc-auth-sasl.h and included in the main VncState. The configure script probes for SASL and automatically enables it if found, unless --disable-vnc-sasl was given to override it. Makefile | 7 Makefile.target | 5 b/qemu.sasl | 34 ++ b/vnc-auth-sasl.c | 626 ++++++++++++++++++++++++++++++++++++++++++++++++++++ b/vnc-auth-sasl.h | 67 +++++ configure | 34 ++ qemu-doc.texi | 97 ++++++++ vnc-auth-vencrypt.c | 12 vnc.c | 249 ++++++++++++++++++-- vnc.h | 31 ++ 10 files changed, 1129 insertions(+), 33 deletions(-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6724 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06 21:27:28 +01:00
fi
if test "$vnc_jpeg" = "yes" ; then
echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
fi
if test "$vnc_png" = "yes" ; then
echo "CONFIG_VNC_PNG=y" >> $config_host_mak
fi
if test "$xkbcommon" = "yes" ; then
echo "XKBCOMMON_CFLAGS=$xkbcommon_cflags" >> $config_host_mak
echo "XKBCOMMON_LIBS=$xkbcommon_libs" >> $config_host_mak
fi
if test "$xfs" = "yes" ; then
echo "CONFIG_XFS=y" >> $config_host_mak
fi
qemu_version=$(head $source_path/VERSION)
echo "VERSION=$qemu_version" >>$config_host_mak
echo "PKGVERSION=$pkgversion" >>$config_host_mak
echo "SRC_PATH=$source_path" >> $config_host_mak
echo "TARGET_DIRS=$target_list" >> $config_host_mak
if [ "$docs" = "yes" ] ; then
echo "BUILD_DOCS=yes" >> $config_host_mak
fi
if test "$modules" = "yes"; then
# $shacmd can generate a hash started with digit, which the compiler doesn't
# like as an symbol. So prefix it with an underscore
echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
echo "CONFIG_MODULES=y" >> $config_host_mak
fi
if test "$module_upgrades" = "yes"; then
echo "CONFIG_MODULE_UPGRADES=y" >> $config_host_mak
fi
if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then
echo "CONFIG_X11=y" >> $config_host_mak
echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak
echo "X11_LIBS=$x11_libs" >> $config_host_mak
fi
if test "$sdl" = "yes" ; then
echo "CONFIG_SDL=m" >> $config_host_mak
echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
echo "SDL_LIBS=$sdl_libs" >> $config_host_mak
if test "$sdl_image" = "yes" ; then
echo "CONFIG_SDL_IMAGE=y" >> $config_host_mak
fi
fi
if test "$cocoa" = "yes" ; then
echo "CONFIG_COCOA=y" >> $config_host_mak
fi
if test "$iconv" = "yes" ; then
echo "CONFIG_ICONV=y" >> $config_host_mak
echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
echo "ICONV_LIBS=$iconv_lib" >> $config_host_mak
fi
if test "$curses" = "yes" ; then
echo "CONFIG_CURSES=m" >> $config_host_mak
echo "CURSES_CFLAGS=$curses_inc" >> $config_host_mak
echo "CURSES_LIBS=$curses_lib" >> $config_host_mak
fi
if test "$pipe2" = "yes" ; then
echo "CONFIG_PIPE2=y" >> $config_host_mak
fi
if test "$accept4" = "yes" ; then
echo "CONFIG_ACCEPT4=y" >> $config_host_mak
fi
if test "$splice" = "yes" ; then
echo "CONFIG_SPLICE=y" >> $config_host_mak
fi
if test "$eventfd" = "yes" ; then
echo "CONFIG_EVENTFD=y" >> $config_host_mak
fi
if test "$memfd" = "yes" ; then
echo "CONFIG_MEMFD=y" >> $config_host_mak
fi
if test "$have_usbfs" = "yes" ; then
echo "CONFIG_USBFS=y" >> $config_host_mak
fi
if test "$fallocate" = "yes" ; then
echo "CONFIG_FALLOCATE=y" >> $config_host_mak
fi
if test "$fallocate_punch_hole" = "yes" ; then
echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
fi
if test "$fallocate_zero_range" = "yes" ; then
echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
fi
if test "$posix_fallocate" = "yes" ; then
echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
fi
if test "$sync_file_range" = "yes" ; then
echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
fi
if test "$fiemap" = "yes" ; then
echo "CONFIG_FIEMAP=y" >> $config_host_mak
fi
if test "$dup3" = "yes" ; then
echo "CONFIG_DUP3=y" >> $config_host_mak
fi
if test "$ppoll" = "yes" ; then
echo "CONFIG_PPOLL=y" >> $config_host_mak
fi
if test "$prctl_pr_set_timerslack" = "yes" ; then
echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
fi
if test "$epoll" = "yes" ; then
echo "CONFIG_EPOLL=y" >> $config_host_mak
fi
if test "$epoll_create1" = "yes" ; then
echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
fi
if test "$sendfile" = "yes" ; then
echo "CONFIG_SENDFILE=y" >> $config_host_mak
fi
if test "$timerfd" = "yes" ; then
echo "CONFIG_TIMERFD=y" >> $config_host_mak
fi
if test "$setns" = "yes" ; then
echo "CONFIG_SETNS=y" >> $config_host_mak
fi
if test "$clock_adjtime" = "yes" ; then
echo "CONFIG_CLOCK_ADJTIME=y" >> $config_host_mak
fi
if test "$syncfs" = "yes" ; then
echo "CONFIG_SYNCFS=y" >> $config_host_mak
fi
if test "$kcov" = "yes" ; then
echo "CONFIG_KCOV=y" >> $config_host_mak
fi
if test "$inotify" = "yes" ; then
echo "CONFIG_INOTIFY=y" >> $config_host_mak
fi
if test "$inotify1" = "yes" ; then
echo "CONFIG_INOTIFY1=y" >> $config_host_mak
fi
if test "$sem_timedwait" = "yes" ; then
echo "CONFIG_SEM_TIMEDWAIT=y" >> $config_host_mak
fi
if test "$strchrnul" = "yes" ; then
echo "HAVE_STRCHRNUL=y" >> $config_host_mak
fi
if test "$st_atim" = "yes" ; then
echo "HAVE_STRUCT_STAT_ST_ATIM=y" >> $config_host_mak
fi
if test "$byteswap_h" = "yes" ; then
echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
fi
if test "$bswap_h" = "yes" ; then
echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
fi
if test "$curl" = "yes" ; then
echo "CONFIG_CURL=m" >> $config_host_mak
echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
echo "CURL_LIBS=$curl_libs" >> $config_host_mak
fi
if test "$brlapi" = "yes" ; then
echo "CONFIG_BRLAPI=y" >> $config_host_mak
echo "BRLAPI_LIBS=$brlapi_libs" >> $config_host_mak
fi
if test "$gtk" = "yes" ; then
echo "CONFIG_GTK=m" >> $config_host_mak
echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
echo "GTK_LIBS=$gtk_libs" >> $config_host_mak
if test "$gtk_gl" = "yes" ; then
echo "CONFIG_GTK_GL=y" >> $config_host_mak
fi
fi
if test "$gio" = "yes" ; then
echo "CONFIG_GIO=y" >> $config_host_mak
echo "GIO_CFLAGS=$gio_cflags" >> $config_host_mak
echo "GIO_LIBS=$gio_libs" >> $config_host_mak
echo "GDBUS_CODEGEN=$gdbus_codegen" >> $config_host_mak
fi
echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
if test "$gnutls" = "yes" ; then
echo "CONFIG_GNUTLS=y" >> $config_host_mak
fi
if test "$gcrypt" = "yes" ; then
echo "CONFIG_GCRYPT=y" >> $config_host_mak
if test "$gcrypt_hmac" = "yes" ; then
echo "CONFIG_GCRYPT_HMAC=y" >> $config_host_mak
fi
fi
if test "$nettle" = "yes" ; then
echo "CONFIG_NETTLE=y" >> $config_host_mak
echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
fi
if test "$qemu_private_xts" = "yes" ; then
echo "CONFIG_QEMU_PRIVATE_XTS=y" >> $config_host_mak
fi
if test "$tasn1" = "yes" ; then
echo "CONFIG_TASN1=y" >> $config_host_mak
fi
authz: add QAuthZPAM object type for authorizing using PAM Add an authorization backend that talks to PAM to check whether the user identity is allowed. This only uses the PAM account validation facility, which is essentially just a check to see if the provided username is permitted access. It doesn't use the authentication or session parts of PAM, since that's dealt with by the relevant part of QEMU (eg VNC server). Consider starting QEMU with a VNC server and telling it to use TLS with x509 client certificates and configuring it to use an PAM to validate the x509 distinguished name. In this example we're telling it to use PAM for the QAuthZ impl with a service name of "qemu-vnc" $ qemu-system-x86_64 \ -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\ endpoint=server,verify-peer=yes \ -object authz-pam,id=authz0,service=qemu-vnc \ -vnc :1,tls-creds=tls0,tls-authz=authz0 This requires an /etc/pam/qemu-vnc file to be created with the auth rules. A very simple file based whitelist can be setup using $ cat > /etc/pam/qemu-vnc <<EOF account requisite pam_listfile.so item=user sense=allow file=/etc/qemu/vnc.allow EOF The /etc/qemu/vnc.allow file simply contains one username per line. Any username not in the file is denied. The usernames in this example are the x509 distinguished name from the client's x509 cert. $ cat > /etc/qemu/vnc.allow <<EOF CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB EOF More interesting would be to configure PAM to use an LDAP backend, so that the QEMU authorization check data can be centralized instead of requiring each compute host to have file maintained. The main limitation with this PAM module is that the rules apply to all QEMU instances on the host. Setting up different rules per VM, would require creating a separate PAM service name & config file for every guest. An alternative approach for the future might be to not pass in the plain username to PAM, but instead combine the VM name or UUID with the username. This requires further consideration though. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-27 15:13:56 +02:00
if test "$auth_pam" = "yes" ; then
echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
fi
if test "$have_ifaddrs_h" = "yes" ; then
echo "HAVE_IFADDRS_H=y" >> $config_host_mak
fi
if test "$have_broken_size_max" = "yes" ; then
echo "HAVE_BROKEN_SIZE_MAX=y" >> $config_host_mak
fi
# Work around a system header bug with some kernel/XFS header
# versions where they both try to define 'struct fsxattr':
# xfs headers will not try to redefine structs from linux headers
# if this macro is set.
if test "$have_fsxattr" = "yes" ; then
echo "HAVE_FSXATTR=y" >> $config_host_mak
fi
if test "$have_copy_file_range" = "yes" ; then
echo "HAVE_COPY_FILE_RANGE=y" >> $config_host_mak
fi
if test "$vte" = "yes" ; then
echo "CONFIG_VTE=y" >> $config_host_mak
echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
echo "VTE_LIBS=$vte_libs" >> $config_host_mak
fi
if test "$virglrenderer" = "yes" ; then
echo "CONFIG_VIRGL=y" >> $config_host_mak
echo "VIRGL_CFLAGS=$virgl_cflags" >> $config_host_mak
echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak
fi
if test "$xen" = "yes" ; then
echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
fi
if test "$linux_aio" = "yes" ; then
echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
fi
if test "$linux_io_uring" = "yes" ; then
echo "CONFIG_LINUX_IO_URING=y" >> $config_host_mak
echo "LINUX_IO_URING_CFLAGS=$linux_io_uring_cflags" >> $config_host_mak
echo "LINUX_IO_URING_LIBS=$linux_io_uring_libs" >> $config_host_mak
fi
if test "$attr" = "yes" ; then
echo "CONFIG_ATTR=y" >> $config_host_mak
fi
if test "$libattr" = "yes" ; then
echo "CONFIG_LIBATTR=y" >> $config_host_mak
fi
if test "$virtfs" = "yes" ; then
echo "CONFIG_VIRTFS=y" >> $config_host_mak
fi
if test "$mpath" = "yes" ; then
echo "CONFIG_MPATH=y" >> $config_host_mak
if test "$mpathpersist_new_api" = "yes"; then
echo "CONFIG_MPATH_NEW_API=y" >> $config_host_mak
fi
fi
vhost-scsi: new device supporting the tcm_vhost Linux kernel module The WWPN specified in configfs is passed to "-device vhost-scsi-pci". The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not available from the QEMU command-line. Instead, I hardcode it to zero. Changes in Patch-v2: - Add vhost_scsi_get_features() in order to determine feature bits supports by host kernel (mst + nab) - Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow EVENT_IDX to be disabled by host in vhost_scsi_get_features() - Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES Changes in Patch-v1: - Set event_idx=off by default (nab, thanks asias) - Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to re-enable in v3.10 (nab) - Update to latest qemu.git/master HEAD Changes in WIP-V3: - Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha) - Add CONFIG_VHOST_SCSI (asias, thanks stefanha) - Add hotplug feature bit Changes in WIP-V2: - Add backend guest masking support (nab) - Bump ABI_VERSION to 1 (nab) - Set up set_guest_notifiers (asias) - Set up vs->dev.vq_index (asias) - Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias) - Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias) Howto: Use the latest seabios, at least commit b44a7be17b git clone git://git.seabios.org/seabios.git make cp out/bios.bin /usr/share/qemu/bios.bin qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off ... Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Asias He <asias@redhat.com> [ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature negotiation and irqfd masking - Paolo ] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-29 02:08:16 +01:00
if test "$vhost_scsi" = "yes" ; then
echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
fi
if test "$vhost_net" = "yes" ; then
echo "CONFIG_VHOST_NET=y" >> $config_host_mak
fi
if test "$vhost_net_user" = "yes" ; then
echo "CONFIG_VHOST_NET_USER=y" >> $config_host_mak
fi
if test "$vhost_crypto" = "yes" ; then
echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
fi
if test "$vhost_vsock" = "yes" ; then
echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
fi
if test "$vhost_kernel" = "yes" ; then
echo "CONFIG_VHOST_KERNEL=y" >> $config_host_mak
fi
if test "$vhost_user" = "yes" ; then
echo "CONFIG_VHOST_USER=y" >> $config_host_mak
fi
if test "$vhost_user_fs" = "yes" ; then
echo "CONFIG_VHOST_USER_FS=y" >> $config_host_mak
fi
if test "$blobs" = "yes" ; then
echo "INSTALL_BLOBS=yes" >> $config_host_mak
fi
if test "$iovec" = "yes" ; then
echo "CONFIG_IOVEC=y" >> $config_host_mak
fi
if test "$preadv" = "yes" ; then
echo "CONFIG_PREADV=y" >> $config_host_mak
fi
if test "$fdt" != "no" ; then
echo "CONFIG_FDT=y" >> $config_host_mak
fi
if test "$membarrier" = "yes" ; then
echo "CONFIG_MEMBARRIER=y" >> $config_host_mak
fi
if test "$signalfd" = "yes" ; then
echo "CONFIG_SIGNALFD=y" >> $config_host_mak
fi
qemu-io: Add generic function for reinitializing optind. On FreeBSD 11.2: $ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd' Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write After main option parsing, we reinitialize optind so we can parse each command. However reinitializing optind to 0 does not work on FreeBSD. What happens when you do this is optind remains 0 after the option parsing loop, and the result is we try to parse argv[optind] == argv[0] == "aio_write" as if it was the first parameter. The FreeBSD manual page says: In order to use getopt() to evaluate multiple sets of arguments, or to evaluate a single set of arguments multiple times, the variable optreset must be set to 1 before the second and each additional set of calls to getopt(), and the variable optind must be reinitialized. (From the rest of the man page it is clear that optind must be reinitialized to 1). The glibc man page says: A program that scans multiple argument vectors, or rescans the same vector more than once, and wants to make use of GNU extensions such as '+' and '-' at the start of optstring, or changes the value of POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting optind to 0, rather than the traditional value of 1. (Resetting to 0 forces the invocation of an internal initialization routine that rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.) This commit introduces an OS-portability function called qemu_reset_optind which provides a way of resetting optind that works on FreeBSD and platforms that use optreset, while keeping it the same as now on other platforms. Note that the qemu codebase sets optind in many other places, but in those other places it's setting a local variable and not using getopt. This change is only needed in places where we are using getopt and the associated global variable optind. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Message-id: 20190118101114.11759-2-rjones@redhat.com Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-01-18 11:11:14 +01:00
if test "$optreset" = "yes" ; then
echo "HAVE_OPTRESET=y" >> $config_host_mak
fi
if test "$tcg" = "yes"; then
echo "CONFIG_TCG=y" >> $config_host_mak
if test "$tcg_interpreter" = "yes" ; then
echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
fi
fi
if test "$fdatasync" = "yes" ; then
echo "CONFIG_FDATASYNC=y" >> $config_host_mak
fi
Introduce qemu_madvise() vl.c has a Sun-specific hack to supply a prototype for madvise(), but the call site has apparently moved to arch_init.c. Haiku doesn't implement madvise() in favor of posix_madvise(). OpenBSD and Solaris 10 don't implement posix_madvise() but madvise(). MinGW implements neither. Check for madvise() and posix_madvise() in configure and supply qemu_madvise() as wrapper. Prefer madvise() over posix_madvise() due to flag availability. Convert all callers to use qemu_madvise() and QEMU_MADV_*. Note that on Solaris the warning is fixed by moving the madvise() prototype, not by qemu_madvise() itself. It helps with porting though, and it simplifies most call sites. v7 -> v8: * Some versions of MinGW have no sys/mman.h header. Reported by Blue Swirl. v6 -> v7: * Adopt madvise() rather than posix_madvise() semantics for returning errors. * Use EINVAL in place of ENOTSUP. v5 -> v6: * Replace two leftover instances of POSIX_MADV_NORMAL with QEMU_MADV_INVALID. Spotted by Blue Swirl. v4 -> v5: * Introduce QEMU_MADV_INVALID, suggested by Alexander Graf. Note that this relies on -1 not being a valid advice value. v3 -> v4: * Eliminate #ifdefs at qemu_advise() call sites. Requested by Blue Swirl. This will currently break the check in kvm-all.c by calling madvise() with a supported flag, which will not fail. Ideas/patches welcome. v2 -> v3: * Reuse the *_MADV_* defines for QEMU_MADV_*. Suggested by Alexander Graf. * Add configure check for madvise(), too. Add defines to Makefile, not QEMU_CFLAGS. Convert all callers, untested. Suggested by Blue Swirl. * Keep Solaris' madvise() prototype around. Pointed out by Alexander Graf. * Display configure check results. v1 -> v2: * Don't rely on posix_madvise() availability, add qemu_madvise(). Suggested by Blue Swirl. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-09-25 13:26:05 +02:00
if test "$madvise" = "yes" ; then
echo "CONFIG_MADVISE=y" >> $config_host_mak
fi
if test "$posix_madvise" = "yes" ; then
echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
fi
if test "$posix_memalign" = "yes" ; then
echo "CONFIG_POSIX_MEMALIGN=y" >> $config_host_mak
fi
2010-03-24 10:26:51 +01:00
if test "$spice" = "yes" ; then
echo "CONFIG_SPICE=y" >> $config_host_mak
fi
usb-ccid: add CCID bus A CCID device is a smart card reader. It is a USB device, defined at [1]. This patch introduces the usb-ccid device that is a ccid bus. Next patches will introduce two card types to use it, a passthru card and an emulated card. [1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110. Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v20->v21: (Jes Sorenson review) * cosmetic changes - fix multi line comments. * reorder fields in USBCCIDState * add reference to COPYING * add --enable-smartcard and --disable-smartcard here (moved from last patch) changes from v19->v20: * checkpatch.pl changes from v18->v19: * merged: ccid.h: add copyright, fix define and remove non C89 comments * add qdev.desc changes from v15->v16: Behavioral changes: * fix abort on client answer after card remove * enable migration * remove side affect code from asserts * return consistent self-powered state * mask out reserved bits in ccid_set_parameters * add missing abRFU in SetParameters (no affect on linux guest) whitefixes / comments / consts defines: * remove stale comment * remove ccid_print_pending_answers if no DEBUG_CCID * replace printf's with DPRINTF, remove DEBUG_CCID, add verbosity defines * use error_report * update copyright (most of the code is not original) * reword known bug comment * add missing closing quote in comment * add missing whitespace on one line * s/CCID_SetParameter/CCID_SetParameters/ * add comments * use define for max packet size Comment for "return consistent self-powered state": the Configuration Descriptor bmAttributes claims we are self powered, but we were returning not self powered to USB_REQ_GET_STATUS control message. In practice, this message is not sent by a linux 2.6.35.10-74.fc14.x86_64 guest (not tested on other guests), unless you issue lsusb -v as root (for example).
2010-10-17 11:40:07 +02:00
if test "$smartcard" = "yes" ; then
echo "CONFIG_SMARTCARD=y" >> $config_host_mak
echo "SMARTCARD_CFLAGS=$libcacard_cflags" >> $config_host_mak
echo "SMARTCARD_LIBS=$libcacard_libs" >> $config_host_mak
libcacard: initial commit libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: Alon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: Alon Levy <alevy@redhat.com> libcacard: fix out of tree builds
2010-11-28 15:36:38 +01:00
fi
if test "$libusb" = "yes" ; then
echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
echo "LIBUSB_CFLAGS=$libusb_cflags" >> $config_host_mak
echo "LIBUSB_LIBS=$libusb_libs" >> $config_host_mak
fi
if test "$usb_redir" = "yes" ; then
echo "CONFIG_USB_REDIR=y" >> $config_host_mak
echo "USB_REDIR_CFLAGS=$usb_redir_cflags" >> $config_host_mak
echo "USB_REDIR_LIBS=$usb_redir_libs" >> $config_host_mak
fi
if test "$opengl" = "yes" ; then
echo "CONFIG_OPENGL=y" >> $config_host_mak
echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
if test "$opengl_dmabuf" = "yes" ; then
echo "CONFIG_OPENGL_DMABUF=y" >> $config_host_mak
fi
fi
if test "$gbm" = "yes" ; then
echo "CONFIG_GBM=y" >> $config_host_mak
echo "GBM_LIBS=$gbm_libs" >> $config_host_mak
echo "GBM_CFLAGS=$gbm_cflags" >> $config_host_mak
fi
if test "$malloc_trim" = "yes" ; then
echo "CONFIG_MALLOC_TRIM=y" >> $config_host_mak
fi
if test "$avx2_opt" = "yes" ; then
echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
fi
if test "$avx512f_opt" = "yes" ; then
echo "CONFIG_AVX512F_OPT=y" >> $config_host_mak
fi
if test "$lzo" = "yes" ; then
echo "CONFIG_LZO=y" >> $config_host_mak
fi
if test "$snappy" = "yes" ; then
echo "CONFIG_SNAPPY=y" >> $config_host_mak
fi
if test "$bzip2" = "yes" ; then
echo "CONFIG_BZIP2=y" >> $config_host_mak
echo "BZIP2_LIBS=-lbz2" >> $config_host_mak
fi
if test "$lzfse" = "yes" ; then
echo "CONFIG_LZFSE=y" >> $config_host_mak
echo "LZFSE_LIBS=-llzfse" >> $config_host_mak
fi
if test "$zstd" = "yes" ; then
echo "CONFIG_ZSTD=y" >> $config_host_mak
fi
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
if test "$libiscsi" = "yes" ; then
echo "CONFIG_LIBISCSI=m" >> $config_host_mak
echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
iSCSI block driver This provides built-in support for iSCSI to QEMU. This has the advantage that the iSCSI devices need not be made visible to the host, which is useful if you have very many virtual machines and very many iscsi devices. It also has the benefit that non-root users of QEMU can access iSCSI devices across the network without requiring root privilege on the host. This driver interfaces with the multiplatform posix library for iscsi initiator/client access to iscsi devices hosted at git://github.com/sahlberg/libiscsi.git The patch adds the driver to interface with the iscsi library. It also updated the configure script to * by default, probe is libiscsi is available and if so, build qemu against libiscsi. * --enable-libiscsi Force a build against libiscsi. If libiscsi is not available the build will fail. * --disable-libiscsi Do not link against libiscsi, even if it is available. When linked with libiscsi, qemu gains support to access iscsi resources such as disks and cdrom directly, without having to make the devices visible to the host. You can specify devices using a iscsi url of the form : iscsi://[<username>[:<password>@]]<host>[:<port]/<target-iqn-name>/<lun> When using authentication, the password can optionally be set with LIBISCSI_CHAP_PASSWORD="password" to avoid it showing up in the process list Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-25 10:24:24 +02:00
fi
if test "$libnfs" = "yes" ; then
echo "CONFIG_LIBNFS=m" >> $config_host_mak
echo "LIBNFS_LIBS=$libnfs_libs" >> $config_host_mak
fi
if test "$seccomp" = "yes"; then
echo "CONFIG_SECCOMP=y" >> $config_host_mak
echo "SECCOMP_CFLAGS=$seccomp_cflags" >> $config_host_mak
echo "SECCOMP_LIBS=$seccomp_libs" >> $config_host_mak
fi
# XXX: suppress that
if [ "$bsd" = "yes" ] ; then
echo "CONFIG_BSD=y" >> $config_host_mak
fi
oslib-win32: only provide localtime_r/gmtime_r if missing The oslib-win32 file currently provides a localtime_r and gmtime_r replacement unconditionally. Some versions of Mingw-w64 would provide crude macros for localtime_r/gmtime_r which QEMU takes care to disable. Latest versions of Mingw-w64 now provide actual functions for localtime_r/gmtime_r, but with a twist that you have to include unistd.h or pthread.h before including time.h. By luck some files in QEMU have such an include order, resulting in compile errors: CC util/osdep.o In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls] struct tm *gmtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here In file included from include/qemu-common.h:48:0, from util/osdep.c:48: include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls] struct tm *localtime_r(const time_t *timep, struct tm *result); ^ In file included from include/qemu-common.h:35:0, from util/osdep.c:48: /usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here This change adds a configure test to see if localtime_r exits, and only enables the QEMU impl if missing. We also re-arrange qemu-common.h try attempt to guarantee that all source files get unistd.h before time.h and thus see the localtime_r/gmtime_r defs. [sw: Use "official" spellings for Mingw-w64, MinGW in comments.] [sw: Terminate sentences with a dot in comments.] Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2015-09-22 16:13:26 +02:00
if test "$localtime_r" = "yes" ; then
echo "CONFIG_LOCALTIME_R=y" >> $config_host_mak
fi
if test "$qom_cast_debug" = "yes" ; then
echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
fi
if test "$rbd" = "yes" ; then
echo "CONFIG_RBD=m" >> $config_host_mak
echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
fi
echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
if test "$coroutine_pool" = "yes" ; then
echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
else
echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
fi
if test "$debug_stack_usage" = "yes" ; then
echo "CONFIG_DEBUG_STACK_USAGE=y" >> $config_host_mak
fi
if test "$crypto_afalg" = "yes" ; then
echo "CONFIG_AF_ALG=y" >> $config_host_mak
fi
if test "$open_by_handle_at" = "yes" ; then
echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
fi
if test "$linux_magic_h" = "yes" ; then
echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
fi
if test "$pragma_diagnostic_available" = "yes" ; then
echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
fi
if test "$valgrind_h" = "yes" ; then
echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
fi
if test "$have_asan_iface_fiber" = "yes" ; then
echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
fi
if test "$has_environ" = "yes" ; then
echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
fi
if test "$cpuid_h" = "yes" ; then
echo "CONFIG_CPUID_H=y" >> $config_host_mak
fi
if test "$int128" = "yes" ; then
echo "CONFIG_INT128=y" >> $config_host_mak
fi
if test "$atomic128" = "yes" ; then
echo "CONFIG_ATOMIC128=y" >> $config_host_mak
fi
if test "$cmpxchg128" = "yes" ; then
echo "CONFIG_CMPXCHG128=y" >> $config_host_mak
fi
if test "$atomic64" = "yes" ; then
echo "CONFIG_ATOMIC64=y" >> $config_host_mak
fi
if test "$attralias" = "yes" ; then
echo "CONFIG_ATTRIBUTE_ALIAS=y" >> $config_host_mak
fi
if test "$getauxval" = "yes" ; then
echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
fi
if test "$glusterfs" = "yes" ; then
echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
fi
if test "$glusterfs_xlator_opt" = "yes" ; then
echo "CONFIG_GLUSTERFS_XLATOR_OPT=y" >> $config_host_mak
fi
if test "$glusterfs_discard" = "yes" ; then
echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
fi
if test "$glusterfs_fallocate" = "yes" ; then
echo "CONFIG_GLUSTERFS_FALLOCATE=y" >> $config_host_mak
fi
if test "$glusterfs_zerofill" = "yes" ; then
echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
fi
if test "$glusterfs_ftruncate_has_stat" = "yes" ; then
echo "CONFIG_GLUSTERFS_FTRUNCATE_HAS_STAT=y" >> $config_host_mak
fi
if test "$glusterfs_iocb_has_stat" = "yes" ; then
echo "CONFIG_GLUSTERFS_IOCB_HAS_STAT=y" >> $config_host_mak
fi
if test "$libssh" = "yes" ; then
echo "CONFIG_LIBSSH=m" >> $config_host_mak
echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
fi
if test "$live_block_migration" = "yes" ; then
echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
fi
if test "$tpm" = "yes"; then
echo 'CONFIG_TPM=y' >> $config_host_mak
fi
echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
if have_backend "nop"; then
echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
fi
if have_backend "simple"; then
echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
# Set the appropriate trace file.
trace_file="\"$trace_file-\" FMT_pid"
fi
if have_backend "log"; then
echo "CONFIG_TRACE_LOG=y" >> $config_host_mak
fi
if have_backend "ust"; then
echo "CONFIG_TRACE_UST=y" >> $config_host_mak
fi
if have_backend "dtrace"; then
echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
if test "$trace_backend_stap" = "yes" ; then
echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
fi
fi
if have_backend "ftrace"; then
if test "$linux" = "yes" ; then
echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
else
feature_not_found "ftrace(trace backend)" "ftrace requires Linux"
fi
fi
if have_backend "syslog"; then
if test "$posix_syslog" = "yes" ; then
echo "CONFIG_TRACE_SYSLOG=y" >> $config_host_mak
else
feature_not_found "syslog(trace backend)" "syslog not available"
fi
fi
echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
if test "$rdma" = "yes" ; then
echo "CONFIG_RDMA=y" >> $config_host_mak
echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak
fi
if test "$pvrdma" = "yes" ; then
echo "CONFIG_PVRDMA=y" >> $config_host_mak
fi
if test "$have_rtnetlink" = "yes" ; then
echo "CONFIG_RTNETLINK=y" >> $config_host_mak
fi
if test "$libxml2" = "yes" ; then
echo "CONFIG_LIBXML2=y" >> $config_host_mak
echo "LIBXML2_CFLAGS=$libxml2_cflags" >> $config_host_mak
echo "LIBXML2_LIBS=$libxml2_libs" >> $config_host_mak
fi
if test "$replication" = "yes" ; then
echo "CONFIG_REPLICATION=y" >> $config_host_mak
fi
if test "$have_af_vsock" = "yes" ; then
echo "CONFIG_AF_VSOCK=y" >> $config_host_mak
fi
if test "$have_sysmacros" = "yes" ; then
echo "CONFIG_SYSMACROS=y" >> $config_host_mak
fi
use _Static_assert in QEMU_BUILD_BUG_ON QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it, to provide more readable messages on failure. We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT is defined, and reverts to the old way otherwise. That way, systems without C11 conforming compiler will still have the old messages, as verified by intentionally breaking the configure check. the following example output was generated by inverting the condition in QEMU_BUILD_BUG_ON: without _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’ > struct { \ > ^ > /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’ > #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \ > ^~~~~~~~~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ with _Static_assert: > In file included from /qemu/include/qemu/osdep.h:36:0, > from /qemu/qga/commands.c:13: > /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’: > /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)" > #define QEMU_BUILD_BUG_ON(x) _Static_assert((x), #x) > ^ > /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’ > QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \ > ^~~~~~~~~~~~~~~~~ > /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’ > atomic_load_acquire(ptr) > ^~~~~~~~~~~~~~~~~~~ > /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’ > bool finished = atomic_mb_read(&gei->finished); > ^~~~~~~~~~~~~~ Signed-off-by: Andreas Grapentin <andreas@grapentin.org> Message-Id: <20170314165953.18506-1-andreas@grapentin.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14 17:59:53 +01:00
if test "$have_static_assert" = "yes" ; then
echo "CONFIG_STATIC_ASSERT=y" >> $config_host_mak
fi
if test "$have_utmpx" = "yes" ; then
echo "HAVE_UTMPX=y" >> $config_host_mak
fi
if test "$have_getrandom" = "yes" ; then
echo "CONFIG_GETRANDOM=y" >> $config_host_mak
fi
if test "$ivshmem" = "yes" ; then
echo "CONFIG_IVSHMEM=y" >> $config_host_mak
fi
if test "$capstone" != "no" ; then
echo "CONFIG_CAPSTONE=y" >> $config_host_mak
fi
if test "$debug_mutex" = "yes" ; then
echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
fi
# Hold two types of flag:
# CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on
# a thread we have a handle to
# CONFIG_PTHREAD_SETNAME_NP_W_TID - A way of doing it on a particular
# platform
if test "$pthread_setname_np_w_tid" = "yes" ; then
echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
echo "CONFIG_PTHREAD_SETNAME_NP_W_TID=y" >> $config_host_mak
elif test "$pthread_setname_np_wo_tid" = "yes" ; then
echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
echo "CONFIG_PTHREAD_SETNAME_NP_WO_TID=y" >> $config_host_mak
fi
if test "$vxhs" = "yes" ; then
echo "CONFIG_VXHS=y" >> $config_host_mak
echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
fi
if test "$libpmem" = "yes" ; then
echo "CONFIG_LIBPMEM=y" >> $config_host_mak
fi
if test "$bochs" = "yes" ; then
echo "CONFIG_BOCHS=y" >> $config_host_mak
fi
if test "$cloop" = "yes" ; then
echo "CONFIG_CLOOP=y" >> $config_host_mak
fi
if test "$dmg" = "yes" ; then
echo "CONFIG_DMG=y" >> $config_host_mak
fi
if test "$qcow1" = "yes" ; then
echo "CONFIG_QCOW1=y" >> $config_host_mak
fi
if test "$vdi" = "yes" ; then
echo "CONFIG_VDI=y" >> $config_host_mak
fi
if test "$vvfat" = "yes" ; then
echo "CONFIG_VVFAT=y" >> $config_host_mak
fi
if test "$qed" = "yes" ; then
echo "CONFIG_QED=y" >> $config_host_mak
fi
if test "$parallels" = "yes" ; then
echo "CONFIG_PARALLELS=y" >> $config_host_mak
fi
if test "$sheepdog" = "yes" ; then
echo "CONFIG_SHEEPDOG=y" >> $config_host_mak
fi
if test "$fuzzing" = "yes" ; then
if test "$have_fuzzer" = "yes"; then
FUZZ_LDFLAGS=" -fsanitize=address,fuzzer"
FUZZ_CFLAGS=" -fsanitize=address,fuzzer"
CFLAGS=" -fsanitize=address,fuzzer-no-link"
else
error_exit "Your compiler doesn't support -fsanitize=address,fuzzer"
exit 1
fi
fi
if test "$plugins" = "yes" ; then
echo "CONFIG_PLUGIN=y" >> $config_host_mak
LIBS="-ldl $LIBS"
# Copy the export object list to the build dir
if test "$ld_dynamic_list" = "yes" ; then
echo "CONFIG_HAS_LD_DYNAMIC_LIST=yes" >> $config_host_mak
ld_symbols=qemu-plugins-ld.symbols
cp "$source_path/plugins/qemu-plugins.symbols" $ld_symbols
elif test "$ld_exported_symbols_list" = "yes" ; then
echo "CONFIG_HAS_LD_EXPORTED_SYMBOLS_LIST=yes" >> $config_host_mak
ld64_symbols=qemu-plugins-ld64.symbols
echo "# Automatically generated by configure - do not modify" > $ld64_symbols
grep 'qemu_' "$source_path/plugins/qemu-plugins.symbols" | sed 's/;//g' | \
sed -E 's/^[[:space:]]*(.*)/_\1/' >> $ld64_symbols
else
error_exit \
"If \$plugins=yes, either \$ld_dynamic_list or " \
"\$ld_exported_symbols_list should have been set to 'yes'."
fi
fi
if test -n "$gdb_bin" ; then
echo "HAVE_GDB_BIN=$gdb_bin" >> $config_host_mak
fi
if test "$tcg_interpreter" = "yes"; then
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
elif test "$ARCH" = "sparc64" ; then
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
elif test "$ARCH" = "s390x" ; then
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
elif test "$ARCH" = "x86_64" || test "$ARCH" = "x32" ; then
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
elif test "$ARCH" = "ppc64" ; then
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES"
elif test "$ARCH" = "riscv32" || test "$ARCH" = "riscv64" ; then
QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/riscv $QEMU_INCLUDES"
else
QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
fi
echo "TOOLS=$tools" >> $config_host_mak
echo "ROMS=$roms" >> $config_host_mak
echo "MAKE=$make" >> $config_host_mak
echo "INSTALL=$install" >> $config_host_mak
echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
echo "PYTHON=$python" >> $config_host_mak
echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "IASL=$iasl" >> $config_host_mak
fi
echo "HOST_CC=$host_cc" >> $config_host_mak
echo "CXX=$cxx" >> $config_host_mak
echo "OBJCC=$objcc" >> $config_host_mak
echo "AR=$ar" >> $config_host_mak
echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
echo "AS=$as" >> $config_host_mak
echo "CCAS=$ccas" >> $config_host_mak
echo "CPP=$cpp" >> $config_host_mak
echo "OBJCOPY=$objcopy" >> $config_host_mak
echo "LD=$ld" >> $config_host_mak
echo "RANLIB=$ranlib" >> $config_host_mak
echo "NM=$nm" >> $config_host_mak
echo "PKG_CONFIG=$pkg_config_exe" >> $config_host_mak
echo "WINDRES=$windres" >> $config_host_mak
echo "CFLAGS=$CFLAGS" >> $config_host_mak
echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
if test "$sparse" = "yes" ; then
echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
echo "CPP := REAL_CC=\"\$(CPP)\" cgcc" >> $config_host_mak
echo "CXX := REAL_CC=\"\$(CXX)\" cgcc" >> $config_host_mak
echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
fi
configure: Really use local libfdt if the system one is too old QEMU requires libfdt version >= 1.4.2. If the host has an older libfdt installed, the configure script will use a (git cloned) local version. Example with Debian 8: $ dpkg-query --showformat='${Version}\n' --show libfdt-dev 1.4.0+dfsg-1 $ ./configure [...] fdt support yes # from git submodule 'dtc' If this case occurs, the linker will have 2 different libfdt available in the library search path. The default behavior is to search the system path first, then the local path. Even if the configure script noticed the libfdt is too old and clone a more recent locally, when linking the system library is selected first, and the link process eventually fails: LINK mips64el-softmmu/qemu-system-mips64el ../hw/core/loader-fit.o: In function `load_fit': /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:278: undefined reference to `fdt_first_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:286: undefined reference to `fdt_next_subnode' /root/src/github.com/philmd/qemu/hw/core/loader-fit.c:277: undefined reference to `fdt_first_subnode' collect2: error: ld returned 1 exit status Makefile:201: recipe for target 'qemu-system-mips64el' failed make[1]: *** [qemu-system-mips64el] Error 1 QEMU already uses a kludge to enforce local CFLAGS before system ones for libpixman and libfdt, add a similar kludge for the LDFLAGS to enforce using the local libfdt. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180415230522.24404-2-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
2018-04-16 01:05:19 +02:00
echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak
echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
echo "LD_REL_FLAGS=$LD_REL_FLAGS" >> $config_host_mak
echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
echo "LIBS+=$LIBS" >> $config_host_mak
echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
tests: introduce a framework for testing migration performance This introduces a moderately general purpose framework for testing performance of migration. The initial guest workload is provided by the included 'stress' program, which is configured to spawn one thread per guest CPU and run a maximally memory intensive workload. It will loop over GB of memory, xor'ing each byte with data from a 4k array of random bytes. This ensures heavy read and write load across all of guest memory to stress the migration performance. While running the 'stress' program will record how long it takes to xor each GB of memory and print this data for later reporting. The test engine will spawn a pair of QEMU processes, either on the same host, or with the target on a remote host via ssh, using the host kernel and a custom initrd built with 'stress' as the /init binary. Kernel command line args are set to ensure a fast kernel boot time (< 1 second) between launching QEMU and the stress program starting execution. None the less, the test engine will initially wait N seconds for the guest workload to stablize, before starting the migration operation. When migration is running, the engine will use pause, post-copy, autoconverge, xbzrle compression and multithread compression features, as well as downtime & bandwidth tuning to encourage completion. If migration completes, the test engine will wait N seconds again for the guest workooad to stablize on the target host. If migration does not complete after a preset number of iterations, it will be aborted. While the QEMU process is running on the source host, the test engine will sample the host CPU usage of QEMU as a whole, and each vCPU thread. While migration is running, it will record all the stats reported by 'query-migration'. Finally, it will capture the output of the stress program running in the guest. All the data produced from a single test execution is recorded in a structured JSON file. A separate program is then able to create interactive charts using the "plotly" python + javascript libraries, showing the characteristics of the migration. The data output provides visualization of the effect on guest vCPU workloads from the migration process, the corresponding vCPU utilization on the host, and the overall CPU hit from QEMU on the host. This is correlated from statistics from the migration process, such as downtime, vCPU throttling and iteration number. While the tests can be run individually with arbitrary parameters, there is also a facility for producing batch reports for a number of pre-defined scenarios / comparisons, in order to be able to get standardized results across different hardware configurations (eg TCP vs RDMA, or comparing different VCPU counts / memory sizes, etc). To use this, first you must build the initrd image $ make tests/migration/initrd-stress.img To run a a one-shot test with all default parameters $ ./tests/migration/guestperf.py > result.json This has many command line args for varying its behaviour. For example, to increase the RAM size and CPU count and bind it to specific host NUMA nodes $ ./tests/migration/guestperf.py \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 \ > result.json Using mem + cpu binding is strongly recommended on NUMA machines, otherwise the guest performance results will vary wildly between runs of the test due to lucky/unlucky NUMA placement, making sensible data analysis impossible. To make it run across separate hosts: $ ./tests/migration/guestperf.py \ --dst-host somehostname > result.json To request that post-copy is enabled, with switchover after 5 iterations $ ./tests/migration/guestperf.py \ --post-copy --post-copy-iters 5 > result.json Once a result.json file is created, a graph of the data can be generated, showing guest workload performance per thread and the migration iteration points: $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu result.json To further include host vCPU utilization and overall QEMU utilization $ ./tests/migration/guestperf-plot.py --output result.html \ --migration-iters --split-guest-cpu \ --qemu-cpu --vcpu-cpu result.json NB, the 'guestperf-plot.py' command requires that you have the plotly python library installed. eg you must do $ pip install --user plotly Viewing the result.html file requires that you have the plotly.min.js file in the same directory as the HTML output. This js file is installed as part of the plotly python library, so can be found in $HOME/.local/lib/python2.7/site-packages/plotly/offline/plotly.min.js The guestperf-plot.py program can accept multiple json files to plot, enabling results from different configurations to be compared. Finally, to run the entire standardized set of comparisons $ ./tests/migration/guestperf-batch.py \ --dst-host somehost \ --mem 4 --cpus 2 \ --src-mem-bind 0 --src-cpu-bind 0,1 \ --dst-mem-bind 1 --dst-cpu-bind 2,3 --output tcp-somehost-4gb-2cpu will store JSON files from all scenarios in the directory named tcp-somehost-4gb-2cpu Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1469020993-29426-7-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-07-20 15:23:13 +02:00
echo "PTHREAD_LIB=$PTHREAD_LIB" >> $config_host_mak
echo "EXESUF=$EXESUF" >> $config_host_mak
echo "DSOSUF=$DSOSUF" >> $config_host_mak
echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
echo "TASN1_LIBS=$tasn1_libs" >> $config_host_mak
echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
echo "POD2MAN=$POD2MAN" >> $config_host_mak
if test "$gcov" = "yes" ; then
echo "CONFIG_GCOV=y" >> $config_host_mak
echo "GCOV=$gcov_tool" >> $config_host_mak
fi
if test "$libudev" != "no"; then
echo "CONFIG_LIBUDEV=y" >> $config_host_mak
echo "LIBUDEV_LIBS=$libudev_libs" >> $config_host_mak
fi
if test "$fuzzing" != "no"; then
echo "CONFIG_FUZZ=y" >> $config_host_mak
echo "FUZZ_CFLAGS=$FUZZ_CFLAGS" >> $config_host_mak
echo "FUZZ_LDFLAGS=$FUZZ_LDFLAGS" >> $config_host_mak
fi
if test "$edk2_blobs" = "yes" ; then
echo "DECOMPRESS_EDK2_BLOBS=y" >> $config_host_mak
fi
# use included Linux headers
if test "$linux" = "yes" ; then
mkdir -p linux-headers
case "$cpu" in
i386|x86_64|x32)
linux_arch=x86
;;
ppc|ppc64|ppc64le)
linux_arch=powerpc
;;
s390x)
linux_arch=s390
;;
aarch64)
linux_arch=arm64
;;
mips64)
linux_arch=mips
;;
*)
# For most CPUs the kernel architecture name and QEMU CPU name match.
linux_arch="$cpu"
;;
esac
# For non-KVM architectures we will not have asm headers
if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
fi
fi
for target in $target_list; do
target_dir="$target"
config_target_mak=$target_dir/config-target.mak
target_name=$(echo $target | cut -d '-' -f 1)
target_aligned_only="no"
case "$target_name" in
alpha|hppa|mips64el|mips64|mipsel|mips|mipsn32|mipsn32el|sh4|sh4eb|sparc|sparc64|sparc32plus|xtensa|xtensaeb)
target_aligned_only="yes"
;;
esac
target_bigendian="no"
case "$target_name" in
armeb|aarch64_be|hppa|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or1k|ppc|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
target_bigendian="yes"
;;
esac
target_softmmu="no"
target_user_only="no"
target_linux_user="no"
target_bsd_user="no"
case "$target" in
${target_name}-softmmu)
target_softmmu="yes"
;;
${target_name}-linux-user)
target_user_only="yes"
target_linux_user="yes"
;;
${target_name}-bsd-user)
target_user_only="yes"
target_bsd_user="yes"
;;
*)
error_exit "Target '$target' not recognised"
exit 1
;;
esac
mkdir -p $target_dir
echo "# Automatically generated by configure - do not modify" > $config_target_mak
bflt="no"
mttcg="no"
interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
gdb_xml_files=""
TARGET_ARCH="$target_name"
TARGET_BASE_ARCH=""
TARGET_ABI_DIR=""
case "$target_name" in
i386)
mttcg="yes"
gdb_xml_files="i386-32bit.xml"
TARGET_SYSTBL_ABI=i386
;;
x86_64)
TARGET_BASE_ARCH=i386
TARGET_SYSTBL_ABI=common,64
mttcg="yes"
gdb_xml_files="i386-64bit.xml"
;;
alpha)
mttcg="yes"
TARGET_SYSTBL_ABI=common
;;
arm|armeb)
TARGET_ARCH=arm
TARGET_SYSTBL_ABI=common,oabi
bflt="yes"
mttcg="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml arm-m-profile.xml"
;;
aarch64|aarch64_be)
TARGET_ARCH=aarch64
TARGET_BASE_ARCH=arm
bflt="yes"
mttcg="yes"
gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml arm-m-profile.xml"
;;
cris)
;;
hppa)
mttcg="yes"
TARGET_SYSTBL_ABI=common,32
;;
lm32)
;;
m68k)
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml m68k-core.xml m68k-fp.xml"
TARGET_SYSTBL_ABI=common
;;
microblaze|microblazeel)
TARGET_ARCH=microblaze
TARGET_SYSTBL_ABI=common
bflt="yes"
echo "TARGET_ABI32=y" >> $config_target_mak
;;
mips|mipsel)
mttcg="yes"
TARGET_ARCH=mips
echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
TARGET_SYSTBL_ABI=o32
;;
mipsn32|mipsn32el)
mttcg="yes"
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
echo "TARGET_ABI32=y" >> $config_target_mak
TARGET_SYSTBL_ABI=n32
;;
mips64|mips64el)
configure: disable MTTCG for MIPS guests While debugging check-acceptance failures I found an instability in the mips64el test case. Briefly the test case: retry.py -n 100 -c -- ./mips64el-softmmu/qemu-system-mips64el \ -display none -vga none -serial mon:stdio \ -machine malta -kernel ./vmlinux-4.7.0-rc1.I6400 \ -cpu I6400 -smp 8 -vga std \ -append "printk.time=0 clocksource=GIC console=tty0 console=ttyS0 panic=-1" \ --no-reboot Reports about a 9% failure rate: Results summary: 0: 91 times (91.00%), avg time 5.547 (0.45 varience/0.67 deviation) -6: 9 times (9.00%), avg time 3.394 (0.02 varience/0.13 deviation) Ran command 100 times, 91 passes When re-run with "--accel tcg,thread=single" the instability goes away. Results summary: 0: 100 times (100.00%), avg time 17.318 (249.76 varience/15.80 deviation) Ran command 100 times, 100 passes Which seems to indicate there is some aspect of the MIPS MTTCG fixes that has been missed. Ideally we would fix that but I'm afraid I don't have time to investigate and am not super familiar with the architecture anyway. In lieu of someone tracking down the failure lets disable it for now. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Aleksandar Rikalo <aleksandar.rikalo@rt-rk.com> Message-Id: <20200323161514.23952-7-alex.bennee@linaro.org>
2020-03-23 17:15:09 +01:00
mttcg="no"
TARGET_ARCH=mips64
TARGET_BASE_ARCH=mips
echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
TARGET_SYSTBL_ABI=n64
;;
moxie)
;;
nios2)
;;
or1k)
TARGET_ARCH=openrisc
TARGET_BASE_ARCH=openrisc
;;
ppc)
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
TARGET_SYSTBL_ABI=common,nospu,32
;;
ppc64)
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
TARGET_SYSTBL_ABI=common,nospu,64
mttcg=yes
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64le)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
TARGET_SYSTBL_ABI=common,nospu,64
mttcg=yes
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
ppc64abi32)
TARGET_ARCH=ppc64
TARGET_BASE_ARCH=ppc
TARGET_ABI_DIR=ppc
TARGET_SYSTBL_ABI=common,nospu,32
echo "TARGET_ABI32=y" >> $config_target_mak
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
;;
riscv32)
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml"
;;
riscv64)
TARGET_BASE_ARCH=riscv
TARGET_ABI_DIR=riscv
mttcg=yes
gdb_xml_files="riscv-64bit-cpu.xml riscv-32bit-fpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml"
;;
rx)
TARGET_ARCH=rx
bflt="yes"
target_compiler=$cross_cc_rx
gdb_xml_files="rx-core.xml"
;;
sh4|sh4eb)
TARGET_ARCH=sh4
TARGET_SYSTBL_ABI=common
bflt="yes"
;;
sparc)
TARGET_SYSTBL_ABI=common,32
;;
sparc64)
TARGET_BASE_ARCH=sparc
TARGET_SYSTBL_ABI=common,64
;;
sparc32plus)
TARGET_ARCH=sparc64
TARGET_BASE_ARCH=sparc
TARGET_ABI_DIR=sparc
TARGET_SYSTBL_ABI=common,32
echo "TARGET_ABI32=y" >> $config_target_mak
;;
s390x)
TARGET_SYSTBL_ABI=common,64
mttcg=yes
gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml s390-gs.xml"
;;
tilegx)
;;
tricore)
;;
unicore32)
;;
xtensa|xtensaeb)
TARGET_ARCH=xtensa
TARGET_SYSTBL_ABI=common
bflt="yes"
mttcg="yes"
;;
*)
error_exit "Unsupported target CPU"
;;
esac
# TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
if [ "$TARGET_BASE_ARCH" = "" ]; then
TARGET_BASE_ARCH=$TARGET_ARCH
fi
symlink "$source_path/Makefile.target" "$target_dir/Makefile"
upper() {
echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
}
target_arch_name="$(upper $TARGET_ARCH)"
echo "TARGET_$target_arch_name=y" >> $config_target_mak
echo "TARGET_NAME=$target_name" >> $config_target_mak
echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
if [ "$TARGET_ABI_DIR" = "" ]; then
TARGET_ABI_DIR=$TARGET_ARCH
fi
echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
if [ "$HOST_VARIANT_DIR" != "" ]; then
echo "HOST_VARIANT_DIR=$HOST_VARIANT_DIR" >> $config_target_mak
fi
if [ "$TARGET_SYSTBL_ABI" != "" ]; then
echo "TARGET_SYSTBL_ABI=$TARGET_SYSTBL_ABI" >> $config_target_mak
fi
if supported_xen_target $target; then
echo "CONFIG_XEN=y" >> $config_target_mak
echo "$target/config-devices.mak: CONFIG_XEN=y" >> $config_host_mak
if test "$xen_pci_passthrough" = yes; then
echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
fi
else
echo "$target/config-devices.mak: CONFIG_XEN=n" >> $config_host_mak
fi
if supported_kvm_target $target; then
echo "CONFIG_KVM=y" >> $config_target_mak
echo "$target/config-devices.mak: CONFIG_KVM=y" >> $config_host_mak
else
echo "$target/config-devices.mak: CONFIG_KVM=n" >> $config_host_mak
fi
if supported_hax_target $target; then
echo "CONFIG_HAX=y" >> $config_target_mak
fi
i386: hvf: add code base from Google's QEMU repository This file begins tracking the files that will be the code base for HVF support in QEMU. This code base is part of Google's QEMU version of their Android emulator, and can be found at https://android.googlesource.com/platform/external/qemu/+/emu-master-dev This code is based on Veertu Inc's vdhh (Veertu Desktop Hosted Hypervisor), found at https://github.com/veertuinc/vdhh. Everything is appropriately licensed under GPL v2-or-later, except for the code inside x86_task.c and x86_task.h, which, deriving from KVM (the Linux kernel), is licensed GPL v2-only. This code base already implements a very great deal of functionality, although Google's version removed from Vertuu's the support for APIC page and hyperv-related stuff. According to the Android Emulator Release Notes, Revision 26.1.3 (August 2017), "Hypervisor.framework is now enabled by default on macOS for 32-bit x86 images to improve performance and macOS compatibility", although we better use with caution for, as the same Revision warns us, "If you experience issues with it specifically, please file a bug report...". The code hasn't seen much update in the last 5 months, so I think that we can further develop the code with occasional visiting Google's repository to see if there has been any update. On top of Google's code, the following changes were made: - add code to the configure script to support the --enable-hvf argument. If the OS is Darwin, it checks for presence of HVF in the system. The patch also adds strings related to HVF in the file qemu-options.hx. QEMU will only support the modern syntax style '-M accel=hvf' no enable hvf; the legacy '-enable-hvf' will not be supported. - fix styling issues - add glue code to cpus.c - move HVFX86EmulatorState field to CPUX86State, changing the the emulation functions to have a parameter with signature 'CPUX86State *' instead of 'CPUState *' so we don't have to get the 'env'. Signed-off-by: Sergio Andres Gomez Del Real <Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-2-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-3-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-5-Sergio.G.DelReal@gmail.com> Message-Id: <20170913090522.4022-6-Sergio.G.DelReal@gmail.com> Message-Id: <20170905035457.3753-7-Sergio.G.DelReal@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-09-13 11:05:09 +02:00
if supported_hvf_target $target; then
echo "CONFIG_HVF=y" >> $config_target_mak
fi
if supported_whpx_target $target; then
echo "CONFIG_WHPX=y" >> $config_target_mak
fi
if test "$target_aligned_only" = "yes" ; then
echo "TARGET_ALIGNED_ONLY=y" >> $config_target_mak
fi
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
fi
if test "$target_softmmu" = "yes" ; then
echo "CONFIG_SOFTMMU=y" >> $config_target_mak
if test "$mttcg" = "yes" ; then
echo "TARGET_SUPPORTS_MTTCG=y" >> $config_target_mak
fi
fi
if test "$target_user_only" = "yes" ; then
echo "CONFIG_USER_ONLY=y" >> $config_target_mak
echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
fi
if test "$target_linux_user" = "yes" ; then
echo "CONFIG_LINUX_USER=y" >> $config_target_mak
fi
list=""
if test ! -z "$gdb_xml_files" ; then
for x in $gdb_xml_files; do
list="$list $source_path/gdb-xml/$x"
done
echo "TARGET_XML_FILES=$list" >> $config_target_mak
fi
if test "$target_user_only" = "yes" && test "$bflt" = "yes"; then
echo "TARGET_HAS_BFLT=y" >> $config_target_mak
fi
if test "$target_bsd_user" = "yes" ; then
echo "CONFIG_BSD_USER=y" >> $config_target_mak
fi
# generate QEMU_CFLAGS/QEMU_LDFLAGS for targets
cflags=""
ldflags=""
disas_config() {
echo "CONFIG_${1}_DIS=y" >> $config_target_mak
echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
}
for i in $ARCH $TARGET_BASE_ARCH ; do
case "$i" in
alpha)
disas_config "ALPHA"
;;
aarch64)
if test -n "${cxx}"; then
disas_config "ARM_A64"
fi
;;
arm)
disas_config "ARM"
if test -n "${cxx}"; then
disas_config "ARM_A64"
fi
;;
cris)
disas_config "CRIS"
;;
hppa)
disas_config "HPPA"
;;
i386|x86_64|x32)
disas_config "I386"
;;
lm32)
disas_config "LM32"
;;
m68k)
disas_config "M68K"
;;
microblaze*)
disas_config "MICROBLAZE"
;;
mips*)
disas_config "MIPS"
if test -n "${cxx}"; then
disas_config "NANOMIPS"
fi
;;
moxie*)
disas_config "MOXIE"
;;
nios2)
disas_config "NIOS2"
;;
or1k)
disas_config "OPENRISC"
;;
ppc*)
disas_config "PPC"
;;
riscv*)
disas_config "RISCV"
;;
rx)
disas_config "RX"
;;
s390*)
disas_config "S390"
;;
sh4)
disas_config "SH4"
;;
sparc*)
disas_config "SPARC"
;;
xtensa*)
disas_config "XTENSA"
;;
esac
done
if test "$tcg_interpreter" = "yes" ; then
disas_config "TCI"
fi
case "$ARCH" in
alpha)
# Ensure there's only a single GP
cflags="-msmall-data $cflags"
;;
esac
if test "$gprof" = "yes" ; then
if test "$target_linux_user" = "yes" ; then
cflags="-p $cflags"
ldflags="-p $ldflags"
fi
if test "$target_softmmu" = "yes" ; then
ldflags="-p $ldflags"
echo "GPROF_CFLAGS=-p" >> $config_target_mak
fi
fi
# Newer kernels on s390 check for an S390_PGSTE program header and
# enable the pgste page table extensions in that case. This makes
# the vm.allocate_pgste sysctl unnecessary. We enable this program
# header if
# - we build on s390x
# - we build the system emulation for s390x (qemu-system-s390x)
# - KVM is enabled
# - the linker supports --s390-pgste
if test "$TARGET_ARCH" = "s390x" && test "$target_softmmu" = "yes" && \
test "$ARCH" = "s390x" && test "$kvm" = "yes"; then
if ld_has --s390-pgste ; then
ldflags="-Wl,--s390-pgste $ldflags"
fi
fi
echo "QEMU_LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
done # for target in $targets
echo "PIXMAN_CFLAGS=$pixman_cflags" >> $config_host_mak
echo "PIXMAN_LIBS=$pixman_libs" >> $config_host_mak
if [ "$fdt" = "git" ]; then
Makefile: Rename targets for make recursion We make a few sub-directories recursively, in particular $(TARGET_DIRS). For goal "all", we do it the nice way: "all" has a prerequisite subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make recursively. Behaves nicely with -j and -k. For other goals such as "clean" and "install", the recipe runs make recursively in a for loop. Ignores -j and -k. The next commit will fix that for "clean" and "install". This commit prepares the ground by renaming the targets we use for "all" to include the goal for the sub-make. This will permit reusing them for goals other than "all". Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename to T/all, and declare phony. Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default goal is "all" for all R. Rename to pc-bios/R/all, and declare phony. The remainder are renamed just for consistency. Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to dtc/all, and declare phony. Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE) in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony. Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and declare phony. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-4-armbru@redhat.com> [Add compatibility gunk to keep make working across the rename]
2019-05-28 10:23:07 +02:00
echo "config-host.h: dtc/all" >> $config_host_mak
fi
if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
Makefile: Rename targets for make recursion We make a few sub-directories recursively, in particular $(TARGET_DIRS). For goal "all", we do it the nice way: "all" has a prerequisite subdir-T for each T in $(TARGET_DIRS), and T's recipe runs make recursively. Behaves nicely with -j and -k. For other goals such as "clean" and "install", the recipe runs make recursively in a for loop. Ignores -j and -k. The next commit will fix that for "clean" and "install". This commit prepares the ground by renaming the targets we use for "all" to include the goal for the sub-make. This will permit reusing them for goals other than "all". Targets subdir-T for T in $(TARGET_DIRS) run "make all" in T. Rename to T/all, and declare phony. Targets romsubdir-R for R in $(ROMS) run "make" in pc-bios/R. Default goal is "all" for all R. Rename to pc-bios/R/all, and declare phony. The remainder are renamed just for consistency. Target subdir-dtc runs "make libbft/libfdt.a" in dtc. Rename to dtc/all, and declare phony. Target subdir-capstone runs make $(BUILD_DIR)/capstone/$(LIBCAPSTONE) in $(SRC_PATH)/capstone. Rename to capstone/all, and declare phony. Target subdir-slirp runs "make" in $(SRC_PATH)/slirp. Default goal is all, which builds $(BUILD_DIR)/libslirp.a. Rename to slirp/all, and declare phony. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190528082308.22032-4-armbru@redhat.com> [Add compatibility gunk to keep make working across the rename]
2019-05-28 10:23:07 +02:00
echo "config-host.h: capstone/all" >> $config_host_mak
fi
if test -n "$LIBCAPSTONE"; then
echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
fi
if test "$numa" = "yes"; then
echo "CONFIG_NUMA=y" >> $config_host_mak
fi
if test "$ccache_cpp2" = "yes"; then
echo "export CCACHE_CPP2=y" >> $config_host_mak
fi
# If we're using a separate build tree, set it up now.
# DIRS are directories which we simply mkdir in the build tree;
# LINKS are things to symlink back into the source tree
# (these can be both files and directories).
# Caution: do not add files or directories here using wildcards. This
# will result in problems later if a new file matching the wildcard is
# added to the source tree -- nothing will cause configure to be rerun
# so the build tree will be missing the link back to the new file, and
# tests might fail. Prefer to keep the relevant files in their own
# directory and symlink the directory instead.
DIRS="tests tests/tcg tests/tcg/lm32 tests/qapi-schema tests/qtest/libqos"
DIRS="$DIRS tests/qtest tests/qemu-iotests tests/vm tests/fp tests/qgraph"
DIRS="$DIRS docs docs/interop fsdev scsi"
DIRS="$DIRS pc-bios/optionrom pc-bios/s390-ccw"
DIRS="$DIRS roms/seabios roms/vgabios"
LINKS="Makefile"
LINKS="$LINKS tests/tcg/lm32/Makefile po/Makefile"
LINKS="$LINKS tests/tcg/Makefile.target tests/fp/Makefile"
LINKS="$LINKS tests/plugin/Makefile"
LINKS="$LINKS pc-bios/optionrom/Makefile pc-bios/keymaps"
LINKS="$LINKS pc-bios/s390-ccw/Makefile"
LINKS="$LINKS roms/seabios/Makefile roms/vgabios/Makefile"
LINKS="$LINKS pc-bios/qemu-icon.bmp"
LINKS="$LINKS .gdbinit scripts" # scripts needed by relative path in .gdbinit
LINKS="$LINKS tests/acceptance tests/data"
LINKS="$LINKS tests/qemu-iotests/check"
LINKS="$LINKS python"
for bios_file in \
$source_path/pc-bios/*.bin \
$source_path/pc-bios/*.lid \
$source_path/pc-bios/*.rom \
$source_path/pc-bios/*.dtb \
$source_path/pc-bios/*.img \
$source_path/pc-bios/openbios-* \
$source_path/pc-bios/u-boot.* \
$source_path/pc-bios/edk2-*.fd.bz2 \
$source_path/pc-bios/palcode-*
do
LINKS="$LINKS pc-bios/$(basename $bios_file)"
done
mkdir -p $DIRS
for f in $LINKS ; do
if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
symlink "$source_path/$f" "$f"
fi
done
(for i in $cross_cc_vars; do
export $i
done
export target_list source_path use_containers
$source_path/tests/tcg/configure.sh)
# temporary config to build submodules
for rom in seabios vgabios ; do
config_mak=roms/$rom/config.mak
echo "# Automatically generated by configure - do not modify" > $config_mak
echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
echo "AS=$as" >> $config_mak
echo "CCAS=$ccas" >> $config_mak
echo "CC=$cc" >> $config_mak
echo "BCC=bcc" >> $config_mak
echo "CPP=$cpp" >> $config_mak
echo "OBJCOPY=objcopy" >> $config_mak
echo "IASL=$iasl" >> $config_mak
echo "LD=$ld" >> $config_mak
echo "RANLIB=$ranlib" >> $config_mak
done
# set up qemu-iotests in this build directory
iotests_common_env="tests/qemu-iotests/common.env"
echo "# Automatically generated by configure - do not modify" > "$iotests_common_env"
echo >> "$iotests_common_env"
echo "export PYTHON='$python'" >> "$iotests_common_env"
# Save the configure command line for later reuse.
cat <<EOD >config.status
#!/bin/sh
# Generated by configure.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
EOD
configure: preserve various environment variables in config.status The config.status script is auto-generated by configure upon completion. The intention is that config.status can be later invoked by the developer directly, or by make indirectly, to re-detect the same environment that configure originally used. The current config.status script, however, only contains a record of the command line arguments to configure. Various environment variables have an effect on what configure will find. In particular PKG_CONFIG_LIBDIR & PKG_CONFIG_PATH vars will affect what libraries pkg-config finds. The PATH var will affect what toolchain binaries and XXXX-config scripts are found. The LD_LIBRARY_PATH var will affect what libraries are found. Most commands have env variables that will override the name/path of the default version configure finds. All these key env variables should be recorded in the config.status script. Autoconf would also preserve CFLAGS, LDFLAGS, LIBS, CPPFLAGS, but QEMU deals with those differently, expecting extra flags to be set using configure args, rather than env variables. At the end of the script we also don't have the original values of those env vars, as we modify them during configure. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180904123603.10016-1-berrange@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-09-04 14:36:03 +02:00
preserve_env() {
envname=$1
eval envval=\$$envname
if test -n "$envval"
then
echo "$envname='$envval'" >> config.status
echo "export $envname" >> config.status
else
echo "unset $envname" >> config.status
fi
}
# Preserve various env variables that influence what
# features/build target configure will detect
preserve_env AR
preserve_env AS
preserve_env CC
preserve_env CPP
preserve_env CXX
preserve_env INSTALL
preserve_env LD
preserve_env LD_LIBRARY_PATH
preserve_env LIBTOOL
preserve_env MAKE
preserve_env NM
preserve_env OBJCOPY
preserve_env PATH
preserve_env PKG_CONFIG
preserve_env PKG_CONFIG_LIBDIR
preserve_env PKG_CONFIG_PATH
preserve_env PYTHON
preserve_env SDL2_CONFIG
preserve_env SMBD
preserve_env STRIP
preserve_env WINDRES
printf "exec" >>config.status
printf " '%s'" "$0" "$@" >>config.status
echo ' "$@"' >>config.status
chmod +x config.status
rm -r "$TMPDIR1"