qemu-e2k/hw/arm_timer.c

327 lines
8.8 KiB
C
Raw Normal View History

/*
* ARM PrimeCell Timer modules.
*
* Copyright (c) 2005-2006 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "sysbus.h"
#include "qemu-timer.h"
/* Common timer implementation. */
#define TIMER_CTRL_ONESHOT (1 << 0)
#define TIMER_CTRL_32BIT (1 << 1)
#define TIMER_CTRL_DIV1 (0 << 2)
#define TIMER_CTRL_DIV16 (1 << 2)
#define TIMER_CTRL_DIV256 (2 << 2)
#define TIMER_CTRL_IE (1 << 5)
#define TIMER_CTRL_PERIODIC (1 << 6)
#define TIMER_CTRL_ENABLE (1 << 7)
typedef struct {
ptimer_state *timer;
uint32_t control;
uint32_t limit;
int freq;
int int_level;
qemu_irq irq;
} arm_timer_state;
/* Check all active timers, and schedule the next timer interrupt. */
static void arm_timer_update(arm_timer_state *s)
{
/* Update interrupts. */
if (s->int_level && (s->control & TIMER_CTRL_IE)) {
qemu_irq_raise(s->irq);
} else {
qemu_irq_lower(s->irq);
}
}
static uint32_t arm_timer_read(void *opaque, target_phys_addr_t offset)
{
arm_timer_state *s = (arm_timer_state *)opaque;
switch (offset >> 2) {
case 0: /* TimerLoad */
case 6: /* TimerBGLoad */
return s->limit;
case 1: /* TimerValue */
return ptimer_get_count(s->timer);
case 2: /* TimerControl */
return s->control;
case 4: /* TimerRIS */
return s->int_level;
case 5: /* TimerMIS */
if ((s->control & TIMER_CTRL_IE) == 0)
return 0;
return s->int_level;
default:
hw_error("arm_timer_read: Bad offset %x\n", (int)offset);
return 0;
}
}
/* Reset the timer limit after settings have changed. */
static void arm_timer_recalibrate(arm_timer_state *s, int reload)
{
uint32_t limit;
if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) {
/* Free running. */
if (s->control & TIMER_CTRL_32BIT)
limit = 0xffffffff;
else
limit = 0xffff;
} else {
/* Periodic. */
limit = s->limit;
}
ptimer_set_limit(s->timer, limit, reload);
}
static void arm_timer_write(void *opaque, target_phys_addr_t offset,
uint32_t value)
{
arm_timer_state *s = (arm_timer_state *)opaque;
int freq;
switch (offset >> 2) {
case 0: /* TimerLoad */
s->limit = value;
arm_timer_recalibrate(s, 1);
break;
case 1: /* TimerValue */
/* ??? Linux seems to want to write to this readonly register.
Ignore it. */
break;
case 2: /* TimerControl */
if (s->control & TIMER_CTRL_ENABLE) {
/* Pause the timer if it is running. This may cause some
inaccuracy dure to rounding, but avoids a whole lot of other
messyness. */
ptimer_stop(s->timer);
}
s->control = value;
freq = s->freq;
/* ??? Need to recalculate expiry time after changing divisor. */
switch ((value >> 2) & 3) {
case 1: freq >>= 4; break;
case 2: freq >>= 8; break;
}
arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE);
ptimer_set_freq(s->timer, freq);
if (s->control & TIMER_CTRL_ENABLE) {
/* Restart the timer if still enabled. */
ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0);
}
break;
case 3: /* TimerIntClr */
s->int_level = 0;
break;
case 6: /* TimerBGLoad */
s->limit = value;
arm_timer_recalibrate(s, 0);
break;
default:
hw_error("arm_timer_write: Bad offset %x\n", (int)offset);
}
arm_timer_update(s);
}
static void arm_timer_tick(void *opaque)
{
arm_timer_state *s = (arm_timer_state *)opaque;
s->int_level = 1;
arm_timer_update(s);
}
static const VMStateDescription vmstate_arm_timer = {
.name = "arm_timer",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32(control, arm_timer_state),
VMSTATE_UINT32(limit, arm_timer_state),
VMSTATE_INT32(int_level, arm_timer_state),
VMSTATE_PTIMER(timer, arm_timer_state),
VMSTATE_END_OF_LIST()
}
};
static arm_timer_state *arm_timer_init(uint32_t freq)
{
arm_timer_state *s;
QEMUBH *bh;
s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state));
s->freq = freq;
s->control = TIMER_CTRL_IE;
bh = qemu_bh_new(arm_timer_tick, s);
s->timer = ptimer_init(bh);
vmstate_register(NULL, -1, &vmstate_arm_timer, s);
return s;
}
/* ARM PrimeCell SP804 dual timer module.
Docs for this device don't seem to be publicly available. This
implementation is based on guesswork, the linux kernel sources and the
Integrator/CP timer modules. */
typedef struct {
SysBusDevice busdev;
MemoryRegion iomem;
arm_timer_state *timer[2];
int level[2];
qemu_irq irq;
} sp804_state;
/* Merge the IRQs from the two component devices. */
static void sp804_set_irq(void *opaque, int irq, int level)
{
sp804_state *s = (sp804_state *)opaque;
s->level[irq] = level;
qemu_set_irq(s->irq, s->level[0] || s->level[1]);
}
static uint64_t sp804_read(void *opaque, target_phys_addr_t offset,
unsigned size)
{
sp804_state *s = (sp804_state *)opaque;
/* ??? Don't know the PrimeCell ID for this device. */
if (offset < 0x20) {
return arm_timer_read(s->timer[0], offset);
} else {
return arm_timer_read(s->timer[1], offset - 0x20);
}
}
static void sp804_write(void *opaque, target_phys_addr_t offset,
uint64_t value, unsigned size)
{
sp804_state *s = (sp804_state *)opaque;
if (offset < 0x20) {
arm_timer_write(s->timer[0], offset, value);
} else {
arm_timer_write(s->timer[1], offset - 0x20, value);
}
}
static const MemoryRegionOps sp804_ops = {
.read = sp804_read,
.write = sp804_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static const VMStateDescription vmstate_sp804 = {
.name = "sp804",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.fields = (VMStateField[]) {
VMSTATE_INT32_ARRAY(level, sp804_state, 2),
VMSTATE_END_OF_LIST()
}
};
static int sp804_init(SysBusDevice *dev)
{
sp804_state *s = FROM_SYSBUS(sp804_state, dev);
qemu_irq *qi;
qi = qemu_allocate_irqs(sp804_set_irq, s, 2);
sysbus_init_irq(dev, &s->irq);
/* ??? The timers are actually configurable between 32kHz and 1MHz, but
we don't implement that. */
s->timer[0] = arm_timer_init(1000000);
s->timer[1] = arm_timer_init(1000000);
s->timer[0]->irq = qi[0];
s->timer[1]->irq = qi[1];
memory_region_init_io(&s->iomem, &sp804_ops, s, "sp804", 0x1000);
sysbus_init_mmio_region(dev, &s->iomem);
vmstate_register(&dev->qdev, -1, &vmstate_sp804, s);
return 0;
}
/* Integrator/CP timer module. */
typedef struct {
SysBusDevice busdev;
MemoryRegion iomem;
arm_timer_state *timer[3];
} icp_pit_state;
static uint64_t icp_pit_read(void *opaque, target_phys_addr_t offset,
unsigned size)
{
icp_pit_state *s = (icp_pit_state *)opaque;
int n;
/* ??? Don't know the PrimeCell ID for this device. */
n = offset >> 8;
if (n > 3) {
hw_error("sp804_read: Bad timer %d\n", n);
}
return arm_timer_read(s->timer[n], offset & 0xff);
}
static void icp_pit_write(void *opaque, target_phys_addr_t offset,
uint64_t value, unsigned size)
{
icp_pit_state *s = (icp_pit_state *)opaque;
int n;
n = offset >> 8;
if (n > 3) {
hw_error("sp804_write: Bad timer %d\n", n);
}
arm_timer_write(s->timer[n], offset & 0xff, value);
}
static const MemoryRegionOps icp_pit_ops = {
.read = icp_pit_read,
.write = icp_pit_write,
.endianness = DEVICE_NATIVE_ENDIAN,
};
static int icp_pit_init(SysBusDevice *dev)
{
icp_pit_state *s = FROM_SYSBUS(icp_pit_state, dev);
/* Timer 0 runs at the system clock speed (40MHz). */
s->timer[0] = arm_timer_init(40000000);
/* The other two timers run at 1MHz. */
s->timer[1] = arm_timer_init(1000000);
s->timer[2] = arm_timer_init(1000000);
sysbus_init_irq(dev, &s->timer[0]->irq);
sysbus_init_irq(dev, &s->timer[1]->irq);
sysbus_init_irq(dev, &s->timer[2]->irq);
memory_region_init_io(&s->iomem, &icp_pit_ops, s, "icp_pit", 0x1000);
sysbus_init_mmio_region(dev, &s->iomem);
/* This device has no state to save/restore. The component timers will
save themselves. */
return 0;
}
static void arm_timer_register_devices(void)
{
sysbus_register_dev("integrator_pit", sizeof(icp_pit_state), icp_pit_init);
sysbus_register_dev("sp804", sizeof(sp804_state), sp804_init);
}
device_init(arm_timer_register_devices)