qemu-e2k/block/copy-before-write.c

257 lines
7.5 KiB
C
Raw Normal View History

/*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
* copy-before-write filter driver
*
* The driver performs Copy-Before-Write (CBW) operation: it is injected above
* some node, and before each write it copies _old_ data to the target node.
*
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
* Copyright (c) 2018-2021 Virtuozzo International GmbH.
*
* Author:
* Sementsov-Ogievskiy Vladimir <vsementsov@virtuozzo.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "sysemu/block-backend.h"
#include "qemu/cutils.h"
#include "qapi/error.h"
#include "block/block_int.h"
#include "block/qdict.h"
#include "block/block-copy.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
#include "block/copy-before-write.h"
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
typedef struct BDRVCopyBeforeWriteState {
BlockCopyState *bcs;
BdrvChild *target;
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
} BDRVCopyBeforeWriteState;
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static coroutine_fn int cbw_co_preadv(
BlockDriverState *bs, uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
return bdrv_co_preadv(bs->file, offset, bytes, qiov, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static coroutine_fn int cbw_do_copy_before_write(BlockDriverState *bs,
uint64_t offset, uint64_t bytes, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
BDRVCopyBeforeWriteState *s = bs->opaque;
uint64_t off, end;
int64_t cluster_size = block_copy_cluster_size(s->bcs);
if (flags & BDRV_REQ_WRITE_UNCHANGED) {
return 0;
}
off = QEMU_ALIGN_DOWN(offset, cluster_size);
end = QEMU_ALIGN_UP(offset + bytes, cluster_size);
return block_copy(s->bcs, off, end - off, true);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static int coroutine_fn cbw_co_pdiscard(BlockDriverState *bs,
int64_t offset, int bytes)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, 0);
if (ret < 0) {
return ret;
}
return bdrv_co_pdiscard(bs->file, offset, bytes);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static int coroutine_fn cbw_co_pwrite_zeroes(BlockDriverState *bs,
int64_t offset, int bytes, BdrvRequestFlags flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwrite_zeroes(bs->file, offset, bytes, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static coroutine_fn int cbw_co_pwritev(BlockDriverState *bs,
uint64_t offset,
uint64_t bytes,
QEMUIOVector *qiov, int flags)
{
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
int ret = cbw_do_copy_before_write(bs, offset, bytes, flags);
if (ret < 0) {
return ret;
}
return bdrv_co_pwritev(bs->file, offset, bytes, qiov, flags);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static int coroutine_fn cbw_co_flush(BlockDriverState *bs)
{
if (!bs->file) {
return 0;
}
return bdrv_co_flush(bs->file->bs);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static void cbw_refresh_filename(BlockDriverState *bs)
{
pstrcpy(bs->exact_filename, sizeof(bs->exact_filename),
bs->file->bs->filename);
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
static void cbw_child_perm(BlockDriverState *bs, BdrvChild *c,
BdrvChildRole role,
BlockReopenQueue *reopen_queue,
uint64_t perm, uint64_t shared,
uint64_t *nperm, uint64_t *nshared)
{
if (!(role & BDRV_CHILD_FILTERED)) {
/*
* Target child
*
* Share write to target (child_file), to not interfere
* with guest writes to its disk which may be in target backing chain.
* Can't resize during a backup block job because we check the size
* only upfront.
*/
*nshared = BLK_PERM_ALL & ~BLK_PERM_RESIZE;
*nperm = BLK_PERM_WRITE;
} else {
/* Source child */
bdrv_default_perms(bs, c, role, reopen_queue,
perm, shared, nperm, nshared);
if (!QLIST_EMPTY(&bs->parents)) {
if (perm & BLK_PERM_WRITE) {
*nperm = *nperm | BLK_PERM_CONSISTENT_READ;
}
*nshared &= ~(BLK_PERM_WRITE | BLK_PERM_RESIZE);
}
}
}
static int cbw_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
BdrvDirtyBitmap *copy_bitmap;
bs->file = bdrv_open_child(NULL, options, "file", bs, &child_of_bds,
BDRV_CHILD_FILTERED | BDRV_CHILD_PRIMARY,
false, errp);
if (!bs->file) {
return -EINVAL;
}
s->target = bdrv_open_child(NULL, options, "target", bs, &child_of_bds,
BDRV_CHILD_DATA, false, errp);
if (!s->target) {
return -EINVAL;
}
bs->total_sectors = bs->file->bs->total_sectors;
bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
(BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP | BDRV_REQ_NO_FALLBACK) &
bs->file->bs->supported_zero_flags);
s->bcs = block_copy_state_new(bs->file, s->target, false, false, errp);
if (!s->bcs) {
error_prepend(errp, "Cannot create block-copy-state: ");
return -EINVAL;
}
copy_bitmap = block_copy_dirty_bitmap(s->bcs);
bdrv_set_dirty_bitmap(copy_bitmap, 0, bdrv_dirty_bitmap_size(copy_bitmap));
return 0;
}
static void cbw_close(BlockDriverState *bs)
{
BDRVCopyBeforeWriteState *s = bs->opaque;
block_copy_state_free(s->bcs);
s->bcs = NULL;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
BlockDriver bdrv_cbw_filter = {
.format_name = "copy-before-write",
.instance_size = sizeof(BDRVCopyBeforeWriteState),
.bdrv_open = cbw_open,
.bdrv_close = cbw_close,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
.bdrv_co_preadv = cbw_co_preadv,
.bdrv_co_pwritev = cbw_co_pwritev,
.bdrv_co_pwrite_zeroes = cbw_co_pwrite_zeroes,
.bdrv_co_pdiscard = cbw_co_pdiscard,
.bdrv_co_flush = cbw_co_flush,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
.bdrv_refresh_filename = cbw_refresh_filename,
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
.bdrv_child_perm = cbw_child_perm,
.is_filter = true,
};
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
BlockDriverState *bdrv_cbw_append(BlockDriverState *source,
BlockDriverState *target,
const char *filter_node_name,
BlockCopyState **bcs,
Error **errp)
{
ERRP_GUARD();
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
BDRVCopyBeforeWriteState *state;
BlockDriverState *top;
QDict *opts;
assert(source->total_sectors == target->total_sectors);
opts = qdict_new();
qdict_put_str(opts, "driver", "copy-before-write");
if (filter_node_name) {
qdict_put_str(opts, "node-name", filter_node_name);
}
qdict_put_str(opts, "file", bdrv_get_node_name(source));
qdict_put_str(opts, "target", bdrv_get_node_name(target));
top = bdrv_insert_node(source, opts, BDRV_O_RDWR, errp);
if (!top) {
return NULL;
}
state = top->opaque;
*bcs = state->bcs;
return top;
}
block: rename backup-top to copy-before-write We are going to convert backup_top to full featured public filter, which can be used in separate of backup job. Start from renaming from "how it used" to "what it does". While updating comments in 283 iotest, drop and rephrase also things about ".active", as this field is now dropped, and filter doesn't have "inactive" mode. Note that this change may be considered as incompatible interface change, as backup-top filter format name was visible through query-block and query-named-block-nodes. Still, consider the following reasoning: 1. backup-top was never documented, so if someone depends on format name (for driver that can't be used other than it is automatically inserted on backup job start), it's a kind of "undocumented feature use". So I think we are free to change it. 2. There is a hope, that there is no such users: it's a lot more native to give a good node-name to backup-top filter if need to operate with it somehow, and don't touch format name. 3. Another "incompatible" change in further commit would be moving copy-before-write filter from using backing child to file child. And this is even more reasonable than renaming: for now all public filters are file-child based. So, it's a risky change, but risk seems small and good interface worth it. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Message-Id: <20210824083856.17408-6-vsementsov@virtuozzo.com> Signed-off-by: Hanna Reitz <hreitz@redhat.com>
2021-08-24 10:38:27 +02:00
void bdrv_cbw_drop(BlockDriverState *bs)
{
bdrv_drop_filter(bs, &error_abort);
bdrv_unref(bs);
}
static void cbw_init(void)
{
bdrv_register(&bdrv_cbw_filter);
}
block_init(cbw_init);